C++ pj_caching_pool_init函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pj_caching_pool_init函数的典型用法代码示例。如果您正苦于以下问题：C++ pj_caching_pool_init函数的具体用法？C++ pj_caching_pool_init怎么用？C++ pj_caching_pool_init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pj_caching_pool_init函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int main() {
    pj_caching_pool cp;
    pj_pool_t *pool;
    pjmedia_endpt *ep;
    pjmedia_conf *conf;
    pjmedia_port *fp, *mp;
    pjmedia_snd_port *sp;
    pjmedia_snd_port *mic;
    unsigned slot;

    pj_init();
    pj_srand(12345);
    pj_caching_pool_init(&cp, NULL, 1024);
    pool = pj_pool_create(&cp.factory, "pool1", 1024, 1024, NULL);
    pjmedia_endpt_create(&cp.factory, NULL, 1, &ep);
    pjmedia_conf_create(pool, 3, 8000, 1, 
                        8000 * 1 * 20 / 1000, // Sample per frame = # of samples in 20 ms
                        16, PJMEDIA_CONF_NO_DEVICE, &conf);
    mp = pjmedia_conf_get_master_port(conf);
    CHECK(__FILE__, pjmedia_snd_port_create_player(pool, 1, 8000, 1, 160, 16, 0, &sp));
    printf("sp=%p - mp=%p\n", sp, mp);
    pjmedia_snd_port_connect(sp, mp);

    pjmedia_snd_port_create_rec(pool, 0, 8000, 1, 160, 16, 0, &mic);

    pjmedia_wav_player_port_create(pool, "NHP-mono-pcm-s16le.wav", 0, 0, 0, &fp);

    //pjmedia_wav_writer_port_create(pool, "vnt.wav", 8000, 1, 160, 16, 0, 0, &fp);

    fp = pjmedia_snd_port_get_port(mic);
    pjmedia_conf_add_port(conf, pool, fp, NULL, &slot);
    pjmedia_conf_connect_port(conf, slot, 0, 0);
    while (1) sleep(2);
}

开发者ID:mocidis，项目名称:media-endpoint，代码行数:34，代码来源:confbridge.c

示例2: SetUpTestCase

 static void SetUpTestCase()
 {
   pj_init();
   pj_caching_pool_init(&caching_pool, &pj_pool_factory_default_policy, 0);
   pjsip_endpt_create(&caching_pool.factory, NULL, &endpt);
   pool = pj_pool_create(&caching_pool.factory, "contact-filtering-test", 4000, 4000, NULL);
 };

开发者ID:gfraysse，项目名称:sprout，代码行数:7，代码来源:uriclassifier_test.cpp

示例3: main

/*
 * main()
 */
int main(int argc, char *argv[])
{
    pj_caching_pool cp;
    pjmedia_endpt *med_ept;
    pjsip_endpoint *sip_ept;
    char errmsg[PJ_ERR_MSG_SIZE];
    pj_status_t code;

    if (argc != 2) {
	puts("Usage: strerror ERRNUM");
	return 1;
    }

    pj_log_set_level(3);

    pj_init();
    pj_caching_pool_init(&cp, NULL, 0);
    pjlib_util_init();
    pjnath_init();
    pjmedia_endpt_create(&cp.factory, NULL, 0, &med_ept);
    pjsip_endpt_create(&cp.factory, "localhost", &sip_ept);
    pjsip_evsub_init_module(sip_ept);

    code = atoi(argv[1]);
    pj_strerror(code, errmsg, sizeof(errmsg));

    printf("Status %d: %s\n", code, errmsg);

    pj_shutdown();
    return 0;
}

开发者ID:LuLei2013，项目名称:pjproject，代码行数:34，代码来源:strerror.c

示例4: publish_sess_

SIPPresence::SIPPresence(SIPAccount *acc)
    : publish_sess_()
    , status_data_()
    , enabled_(false)
    , publish_supported_(false)
    , subscribe_supported_(false)
    , status_(false)
    , note_(" ")
    , acc_(acc)
    , sub_server_list_()  //IP2IP context
    , sub_client_list_()
    , mutex_()
    , mutex_nesting_level_()
    , mutex_owner_()
    , cp_()
    , pool_()
{
    /* init pool */
    pj_caching_pool_init(&cp_, &pj_pool_factory_default_policy, 0);
    pool_ = pj_pool_create(&cp_.factory, "pres", 1000, 1000, NULL);
    if (!pool_)
        throw std::runtime_error("Could not allocate pool for presence");

    /* Create mutex */
    if (pj_mutex_create_recursive(pool_, "pres", &mutex_) != PJ_SUCCESS) {
        pj_pool_release(pool_);
        pj_caching_pool_destroy(&cp_);
        throw std::runtime_error("Unable to create mutex");
    }

    /* init default status */
    updateStatus(false, " ");
}

开发者ID:ThereIsNoYeti，项目名称:sflphone，代码行数:33，代码来源:sippresence.cpp

示例5: init_stack

static pj_status_t init_stack()
{
    pj_sockaddr addr;
    pjsip_inv_callback inv_cb;
    pj_status_t status;

    pj_log_set_level(5);

    status = pj_init();
    CHECK_STATUS();

    pj_log_set_level(3);

    status = pjlib_util_init();
    CHECK_STATUS();

    pj_caching_pool_init(&app.cp, NULL, 0);
    app.pool = pj_pool_create( &app.cp.factory, "sipecho", 512, 512, 0);

    status = pjsip_endpt_create(&app.cp.factory, NULL, &app.sip_endpt);
    CHECK_STATUS();

    pj_log_set_level(4);
    pj_sockaddr_init(AF, &addr, NULL, (pj_uint16_t)SIP_PORT);
    if (AF == pj_AF_INET()) {
	status = pjsip_udp_transport_start( app.sip_endpt, &addr.ipv4, NULL,
					    1, NULL);
    } else if (AF == pj_AF_INET6()) {
	status = pjsip_udp_transport_start6(app.sip_endpt, &addr.ipv6, NULL,
					    1, NULL);
    } else {
	status = PJ_EAFNOTSUP;
    }

    pj_log_set_level(3);
    CHECK_STATUS();

    status = pjsip_tsx_layer_init_module(app.sip_endpt) ||
	     pjsip_ua_init_module( app.sip_endpt, NULL );
    CHECK_STATUS();

    pj_bzero(&inv_cb, sizeof(inv_cb));
    inv_cb.on_state_changed = &call_on_state_changed;
    inv_cb.on_new_session = &call_on_forked;
    inv_cb.on_media_update = &call_on_media_update;
    inv_cb.on_rx_offer = &call_on_rx_offer;

    status = pjsip_inv_usage_init(app.sip_endpt, &inv_cb) ||
	     pjsip_100rel_init_module(app.sip_endpt) ||
	     pjsip_endpt_register_module( app.sip_endpt, &mod_sipecho) ||
	     pjsip_endpt_register_module( app.sip_endpt, &msg_logger) ||
	     //pjmedia_endpt_create(&app.cp.factory,
		//		  pjsip_endpt_get_ioqueue(app.sip_endpt),
		//		  0, &app.med_endpt) ||
             pj_thread_create(app.pool, "sipecho", &worker_proc, NULL, 0, 0,
                              &app.worker_thread);
    CHECK_STATUS();

    return PJ_SUCCESS;
}

开发者ID:xhook，项目名称:asterisk-v11，代码行数:60，代码来源:sipecho.c

示例6: create_app

/*
 * Create app
 */
static pj_status_t create_app(void)
{
    pj_status_t status;

    status = pj_init();
    if (status != PJ_SUCCESS) {
	app_perror(THIS_FILE, "Error initializing pjlib", status);
	return status;
    }

    /* init PJLIB-UTIL: */
    status = pjlib_util_init();
    PJ_ASSERT_RETURN(status == PJ_SUCCESS, status);

    /* Must create a pool factory before we can allocate any memory. */
    pj_caching_pool_init(&app.cp, &pj_pool_factory_default_policy, 
			 CACHING_POOL_SIZE);

    /* Create application pool for misc. */
    app.pool = pj_pool_create(&app.cp.factory, "app", 1000, 1000, NULL);

    /* Create the endpoint: */
    status = pjsip_endpt_create(&app.cp.factory, pj_gethostname()->ptr, 
				&app.sip_endpt);
    PJ_ASSERT_RETURN(status == PJ_SUCCESS, status);


    return status;
}

开发者ID:ClearwaterCore，项目名称:pjsip-upstream，代码行数:32，代码来源:pjsip-perf.c

示例7: test_main

int test_main(void)
{
    int rc = 0;
    pj_caching_pool caching_pool;

    pj_init();
    pj_caching_pool_init(&caching_pool, &pj_pool_factory_default_policy, 0);

    pj_log_set_decor(PJ_LOG_HAS_NEWLINE);
    pj_log_set_level(3);

    mem = &caching_pool.factory;

    DO_TEST(sdp_neg_test());
    //DO_TEST(sdp_test (&caching_pool.factory));
    //DO_TEST(rtp_test(&caching_pool.factory));
    //DO_TEST(session_test (&caching_pool.factory));
    DO_TEST(jbuf_main());
    DO_TEST(mips_test());
    DO_TEST(codec_test_vectors());

    PJ_LOG(3,(THIS_FILE," "));

on_return:
    if (rc != 0) {
	PJ_LOG(3,(THIS_FILE,"Test completed with error(s)!"));
    } else {
	PJ_LOG(3,(THIS_FILE,"Looks like everything is okay!"));
    }

    pj_caching_pool_destroy(&caching_pool);

    return rc;
}

开发者ID:Jopie64，项目名称:pjsip，代码行数:34，代码来源:test.c

示例8: main

/*
 * main()
 */
int main(int argc, char *argv[])
{
    pj_caching_pool cp;
    pj_status_t status;

    if (argc < 2 || argc > 3) {
	puts("Usage: httpdemo URL [output-filename]");
	return 1;
    }

    pj_log_set_level(5);

    pj_init();
    pj_caching_pool_init(&cp, NULL, 0);
    mem = &cp.factory;
    pjlib_util_init();

    if (argc > 2)
	f = fopen(argv[2], "wb");
    else
	f = stdout;

    status = getURL(argv[1]);
    if (status != PJ_SUCCESS) {
        PJ_PERROR(1, (THIS_FILE, status, "Error"));
    }

    if (f != stdout)
	fclose(f);

    pj_caching_pool_destroy(&cp);
    pj_shutdown();
    return 0;
}

开发者ID:avble，项目名称:natClientEx，代码行数:37，代码来源:httpdemo.c

示例9: main

int main(int argc, char *argv[])
{
    ics_stream_t stream_data;
    char tmp[10];
    pj_status_t status;
    pj_caching_pool cp;
    pj_pool_t *pool;

    status = pj_init();
    pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
    pool = pj_pool_create(&cp.factory, "app", 4000, 4000, NULL);

    ics_stream_init(&stream_data, &cp, pool);
    ics_stream_create(&stream_data, 4321, "127.0.0.1:1234", "sink");
    ics_stream_connect_with_snd_sink(&stream_data);
    ics_stream_start(&stream_data);
    
    for (;;) {
        if (fgets(tmp, sizeof(tmp), stdin) == NULL) {
            puts("EOF while reading stdin, will quit now..");
            break;
        }
        if (tmp[0] == 'q')
            break;
    }

    //Destroy and clean`
    ics_stream_clean(&stream_data);
    return 0;
}

开发者ID:buidanhquy，项目名称:pjmedia，代码行数:30，代码来源:stream_playback.c

示例10: init

static pj_status_t init()
{
    pjmedia_codec_mgr *cm;
    pjmedia_codec_info id;
    int i;

    pj_caching_pool_init(&caching_pool, &pj_pool_factory_default_policy, 0);
    pf = &caching_pool.factory;

    if (pj_snd_init(&caching_pool.factory))
	return -1;

    PJ_LOG(3,(THIS_FILE, "Dumping audio devices:"));
    for (i=0; i<pj_snd_get_dev_count(); ++i) {
	const pj_snd_dev_info *info;
	info = pj_snd_get_dev_info(i);
	PJ_LOG(3,(THIS_FILE, "  %d: %s\t(%d in, %d out", 
			     i, info->name, 
			     info->input_count, info->output_count));
    }

    mm = pj_med_mgr_create (&caching_pool.factory);
    cm = pj_med_mgr_get_codec_mgr (mm);

    id.type = PJMEDIA_TYPE_AUDIO;
    id.pt = 0;
    id.encoding_name = pj_str("PCMU");
    id.sample_rate = 8000;

    codec = pjmedia_codec_mgr_alloc_codec (cm, &id);
    codec->op->default_attr(codec, &cattr);
    codec->op->open(codec, &cattr);
    return 0;
}

开发者ID:carlosdelfino，项目名称:WorkshopTelefoniaAutomacao，代码行数:34，代码来源:audio_tool.c

示例11: pj_caching_pool_init

void SDPTest::setUp()
{
	pj_caching_pool_init (&_poolCache, &pj_pool_factory_default_policy, 0);

	_testPool = pj_pool_create (&_poolCache.factory, "sdptest", 4000, 4000, NULL);

	_session = new Sdp(_testPool);
}

开发者ID:max3903，项目名称:SFLphone，代码行数:8，代码来源:sdptest.cpp

示例12: main

int main(int argc, char *argv[])
{
    pj_caching_pool cp;
    pjmedia_endpt *med_endpt;
    pj_status_t status;

    /* Init pjlib */
    status = pj_init();
    PJ_ASSERT_RETURN(status==PJ_SUCCESS, 1);
    
    /* Must create a pool factory before we can allocate any memory. */
    pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);

    /* 
     * Initialize media endpoint.
     * This will implicitly initialize PJMEDIA too.
     */
    status = pjmedia_endpt_create(&cp.factory, NULL, 1, &med_endpt);
    PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);

    
    if (argc == 1) {
	enum_devices();
	return 0;
    } else if (argc == 6) {
	
	int dev_id;
	pjmedia_dir dir = PJMEDIA_DIR_NONE;
	int nchannel;
	int bits;

	dev_id = atoi(argv[1]);

	if (strcmp(argv[2], "rec")==0)
	    dir = PJMEDIA_DIR_CAPTURE;
	else if (strcmp(argv[2], "play")==0)
	    dir = PJMEDIA_DIR_PLAYBACK;
	else if (strcmp(argv[2], "both")==0)
	    dir = PJMEDIA_DIR_CAPTURE_PLAYBACK;

	clock_rate = atoi(argv[3]);
	nchannel = atoi(argv[4]);
	bits = atoi(argv[5]);

	return open_device(dev_id, dir, nchannel, bits);

    } else {
	puts("Error: invalid arguments");
	puts(desc);
	return 1;
    }

    /* Shutdown PJLIB */
    pj_shutdown();

    return 0;
}

开发者ID:tibastral，项目名称:symphonie，代码行数:57，代码来源:sndinfo.c

示例13: test_inner

static int test_inner(void)
{
    pj_caching_pool caching_pool;
    int rc = 0;

    mem = &caching_pool.factory;

#if 1
    pj_log_set_level(3);
    pj_log_set_decor(param_log_decor);
    PJ_UNUSED_ARG(test_log_func);
#elif 1
    log_file = fopen("pjnath-test.log", "wt");
    pj_log_set_level(5);
    orig_log_func = pj_log_get_log_func();
    pj_log_set_log_func(&test_log_func);
#endif

    rc = pj_init();
    if (rc != 0) {
	app_perror("pj_init() error!!", rc);
	return rc;
    }

    pj_dump_config();
    pj_caching_pool_init( &caching_pool, &pj_pool_factory_default_policy, 0 );

    pjlib_util_init();
    pjnath_init();

#if INCLUDE_STUN_TEST
    DO_TEST(stun_test());
    DO_TEST(sess_auth_test());
#endif

#if INCLUDE_ICE_TEST
    DO_TEST(ice_test());
#endif

#if INCLUDE_STUN_SOCK_TEST
    DO_TEST(stun_sock_test());
#endif

#if INCLUDE_TURN_SOCK_TEST
    DO_TEST(turn_sock_test());
#endif

#if INCLUDE_CONCUR_TEST
    DO_TEST(concur_test());
#endif

on_return:
    if (log_file)
	fclose(log_file);
    return rc;
}

开发者ID:Archipov，项目名称:android-client，代码行数:56，代码来源:test.c

示例14: main

int main(int argc, char *argv[])
{
    pj_caching_pool cp;
    pj_time_val t0, t1;
    pj_status_t status;

    if (argc != 4) {
	puts(desc);
	return 1;
    }

    CHECK( pj_init() );
    
    pj_caching_pool_init(&cp, NULL, 0);

    CHECK( pjmedia_endpt_create(&cp.factory, NULL, 1, &mept) );

    /* Register all codecs */
#if PJMEDIA_HAS_G711_CODEC
    CHECK( pjmedia_codec_g711_init(mept) );
#endif
#if PJMEDIA_HAS_GSM_CODEC
    CHECK( pjmedia_codec_gsm_init(mept) );
#endif
#if PJMEDIA_HAS_ILBC_CODEC
    CHECK( pjmedia_codec_ilbc_init(mept, 30) );
#endif
#if PJMEDIA_HAS_SPEEX_CODEC
    CHECK( pjmedia_codec_speex_init(mept, 0, 5, 5) );
#endif
#if PJMEDIA_HAS_G722_CODEC
    CHECK( pjmedia_codec_g722_init(mept) );
#endif

    pj_gettimeofday(&t0);
    status = enc_dec_test(argv[1], argv[2], argv[3]);
    pj_gettimeofday(&t1);
    PJ_TIME_VAL_SUB(t1, t0);

    pjmedia_endpt_destroy(mept);
    pj_caching_pool_destroy(&cp);
    pj_shutdown();

    if (status == PJ_SUCCESS) {
	puts("");
	puts("Success");
	printf("Duration: %ds.%03d\n", file_msec_duration/1000, 
				       file_msec_duration%1000);
	printf("Time: %lds.%03ld\n", t1.sec, t1.msec);
    }

    return 0;
}

开发者ID:deveck，项目名称:Deveck.TAM，代码行数:53，代码来源:encdec.c

示例15: main

int main() {
    pj_caching_pool cp;
    pj_caching_pool_init(&cp, NULL, 4000);
    CHECK(__FILE__, pj_init());
    pjmedia_endpt *endpoint;
    pjmedia_endpt_create(&cp.factory, NULL, 1, &endpoint);
    //pjmedia_codec_register_audio_codecs(endpoint, NULL);
    pjmedia_codec_g711_init(endpoint);
    list_codecs(endpoint);
    pjmedia_codec_g711_deinit();
    list_codecs(endpoint);
    return 0;
}

开发者ID:mocidis，项目名称:media-endpoint，代码行数:13，代码来源:test-codecs.c

示例16: main

int main() {
    
    status = pj_init();
    pj_caching_pool_init(&cp, NULL, 1024);
    pool = pj_pool_create(&cp.factory, "pool", 6400, 6400, NULL);

    app_logging_init();
    PJ_LOG(3, (__FILE__, "zzzzzz %d", 5));
    PJ_LOG(4, (__FILE__, "mmmmmm"));

    app_logging_shutdown();   

    return 0;
}

开发者ID:buidanhquy，项目名称:test，代码行数:14，代码来源:g_file.c

示例17: init_stack

static pj_status_t init_stack(void)
{
    pj_status_t status;

    /* Must init PJLIB first: */
    status = pj_init();
    PJ_ASSERT_RETURN(status == PJ_SUCCESS, status);


    /* Then init PJLIB-UTIL: */
    status = pjlib_util_init();
    PJ_ASSERT_RETURN(status == PJ_SUCCESS, status);


    /* Must create a pool factory before we can allocate any memory. */
    pj_caching_pool_init(&global.cp, &pj_pool_factory_default_policy, 0);

    /* Create the endpoint: */
    status = pjsip_endpt_create(&global.cp.factory, NULL, &global.endpt);
    PJ_ASSERT_RETURN(status == PJ_SUCCESS, status);

    /* Init transaction layer for stateful proxy only */
#if STATEFUL
    status = pjsip_tsx_layer_init_module(global.endpt);
    PJ_ASSERT_RETURN(status == PJ_SUCCESS, status);
#endif

    /* Create listening transport */
    {
        pj_sockaddr_in addr;

        addr.sin_family = pj_AF_INET();
        addr.sin_addr.s_addr = 0;
        addr.sin_port = pj_htons((pj_uint16_t)global.port);

        status = pjsip_udp_transport_start( global.endpt, &addr,
                                            NULL, 1, NULL);
        if (status != PJ_SUCCESS)
            return status;
    }

    /* Create pool for the application */
    global.pool = pj_pool_create(&global.cp.factory, "proxyapp",
                                 4000, 4000, NULL);

    /* Register the logger module */
    pjsip_endpt_register_module(global.endpt, &mod_msg_logger);

    return PJ_SUCCESS;
}

开发者ID:tasosbull，项目名称:yewtic，代码行数:50，代码来源:stateful_proxy.c

示例18: test_inner

static int test_inner(void)
{
    pj_caching_pool caching_pool;
    int rc = 0;

    mem = &caching_pool.factory;

    pj_log_set_level(3);
    pj_log_set_decor(param_log_decor);

    rc = pj_init();
    if (rc != 0) {
	app_perror("pj_init() error!!", rc);
	return rc;
    }

    rc = pjlib_util_init();
    pj_assert(rc == 0);

    pj_dump_config();
    pj_caching_pool_init( &caching_pool, &pj_pool_factory_default_policy, 0 );

#if INCLUDE_XML_TEST
    DO_TEST(xml_test());
#endif

#if INCLUDE_JSON_TEST
    DO_TEST(json_test());
#endif

#if INCLUDE_ENCRYPTION_TEST
    DO_TEST(encryption_test());
    DO_TEST(encryption_benchmark());
#endif

#if INCLUDE_STUN_TEST
    DO_TEST(stun_test());
#endif

#if INCLUDE_RESOLVER_TEST
    DO_TEST(resolver_test());
#endif

#if INCLUDE_HTTP_CLIENT_TEST
    DO_TEST(http_client_test());
#endif

on_return:
    return rc;
}

开发者ID:avble，项目名称:natClientEx，代码行数:50，代码来源:test.c

示例19: main

int main()
{
    pj_turn_srv *srv;
    pj_turn_listener *listener;
    pj_status_t status;

    status = pj_init();
    if (status != PJ_SUCCESS)
	return err("pj_init() error", status);

    pjlib_util_init();
    pjnath_init();

    pj_caching_pool_init(&g_cp, NULL, 0);

    pj_turn_auth_init(REALM);

    status = pj_turn_srv_create(&g_cp.factory, &srv);
    if (status != PJ_SUCCESS)
	return err("Error creating server", status);

    status = pj_turn_listener_create_udp(srv, pj_AF_INET(), NULL, 
					 TURN_PORT, 1, 0, &listener);
    if (status != PJ_SUCCESS)
	return err("Error creating UDP listener", status);

#if PJ_HAS_TCP
    status = pj_turn_listener_create_tcp(srv, pj_AF_INET(), NULL, 
					 TURN_PORT, 1, 0, &listener);
    if (status != PJ_SUCCESS)
	return err("Error creating listener", status);
#endif

    status = pj_turn_srv_add_listener(srv, listener);
    if (status != PJ_SUCCESS)
	return err("Error adding listener", status);

    puts("Server is running");

    pj_log_set_level(LOG_LEVEL);

    console_main(srv);

    pj_turn_srv_destroy(srv);
    pj_caching_pool_destroy(&g_cp);
    pj_shutdown();

    return 0;
}

开发者ID:LuLei2013，项目名称:pjproject，代码行数:49，代码来源:main.c

示例20: main

int main()
{
  pj_caching_pool cp;
  pj_status_t status;
  // Must init PJLIB before anything else
  status = pj_init();
  if (status != PJ_SUCCESS) {
    my_perror("Error initializing PJLIB", status);
    return 1;
  }
  // Create the pool factory, in this case, a caching pool,
  // using default pool policy.
  pj_caching_pool_init(&cp, NULL, 1024*1024 );

  pj_pool_t *pool = pj_pool_create(&cp.factory, "pool1", 4000, 4000, NULL);

  pj_str_t test1_str = test1();
  PRINT_PSTR_DETAILS(&test1_str);

  pj_str_t test2_str = test2();
  PRINT_PSTR_DETAILS(&test2_str);

  pj_str_t test3_str = test3();
  PRINT_PSTR_DETAILS(&test3_str);

  PRINT_PSTR_DETAILS(test4());

  PRINT_PSTR_DETAILS(test5());

  PRINT_PSTR_DETAILS(test6(pool));

  pj_str_t test7_str = test7();
  PRINT_PSTR_DETAILS(&test7_str);

  pj_str_t test8_str = test8(pool);
  PRINT_PSTR_DETAILS(&test8_str);

  pj_pool_release(pool);

  // Done with demos, destroy caching pool before exiting app.
  pj_caching_pool_destroy(&cp);
  return 0;
}

开发者ID:chaitanyagupta，项目名称:pjsip-walkthrough，代码行数:43，代码来源:pj_str.c

注：本文中的pj_caching_pool_init函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。