本文整理汇总了C++中phy_power_off函数的典型用法代码示例。如果您正苦于以下问题：C++ phy_power_off函数的具体用法？C++ phy_power_off怎么用？C++ phy_power_off使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了phy_power_off函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: dwc3_remove
static int dwc3_remove(struct platform_device *pdev)
{
struct dwc3 *dwc = platform_get_drvdata(pdev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
/*
* restore res->start back to its original value so that, in case the
* probe is deferred, we don't end up getting error in request the
* memory region the next time probe is called.
*/
res->start -= DWC3_GLOBALS_REGS_START;
dwc3_debugfs_exit(dwc);
dwc3_core_exit_mode(dwc);
dwc3_event_buffers_cleanup(dwc);
dwc3_free_event_buffers(dwc);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
dwc3_core_exit(dwc);
dwc3_ulpi_exit(dwc);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
开发者ID:Yerguer，项目名称:linux，代码行数:30，代码来源:core.c
示例2: dwc3_suspend
static int dwc3_suspend(struct device *dev)
{
struct dwc3 *dwc = dev_get_drvdata(dev);
unsigned long flags;
spin_lock_irqsave(&dwc->lock, flags);
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
case USB_DR_MODE_OTG:
dwc3_gadget_suspend(dwc);
/* FALLTHROUGH */
case USB_DR_MODE_HOST:
default:
dwc3_event_buffers_cleanup(dwc);
break;
}
dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL);
spin_unlock_irqrestore(&dwc->lock, flags);
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
pinctrl_pm_select_sleep_state(dev);
return 0;
}
开发者ID:enclustra-bsp，项目名称:xilinx-linux，代码行数:35，代码来源:core.c
示例3: dwc3_core_exit
static void dwc3_core_exit(struct dwc3 *dwc)
{
dwc3_event_buffers_cleanup(dwc);
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
}
开发者ID:asmalldev，项目名称:linux，代码行数:14，代码来源:core.c
示例4: dwc3_core_exit
static void dwc3_core_exit(struct dwc3 *dwc)
{
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
clk_bulk_disable(dwc->num_clks, dwc->clks);
clk_bulk_unprepare(dwc->num_clks, dwc->clks);
reset_control_assert(dwc->reset);
}
开发者ID:Xilinx，项目名称:linux-xlnx，代码行数:15，代码来源:core.c
示例5: analogix_dp_bridge_disable
static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
{
struct analogix_dp_device *dp = bridge->driver_private;
int ret;
if (dp->dpms_mode != DRM_MODE_DPMS_ON)
return;
if (dp->plat_data->panel) {
if (drm_panel_disable(dp->plat_data->panel)) {
DRM_ERROR("failed to disable the panel\n");
return;
}
}
disable_irq(dp->irq);
phy_power_off(dp->phy);
if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);
pm_runtime_put_sync(dp->dev);
ret = analogix_dp_prepare_panel(dp, false, true);
if (ret)
DRM_ERROR("failed to setup the panel ret = %d\n", ret);
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
开发者ID:igithubaccount，项目名称:linux，代码行数:29，代码来源:analogix_dp_core.c
示例6: __dwc2_lowlevel_hw_disable
static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret = 0;
if (hsotg->uphy) {
usb_phy_shutdown(hsotg->uphy);
} else if (hsotg->plat && hsotg->plat->phy_exit) {
ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
} else {
ret = phy_exit(hsotg->phy);
if (ret == 0)
ret = phy_power_off(hsotg->phy);
}
if (ret)
return ret;
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
return ret;
}
开发者ID:asmalldev，项目名称:linux，代码行数:25，代码来源:platform.c
示例7: dra7xx_pcie_resume_noirq
static int dra7xx_pcie_resume_noirq(struct device *dev)
{
struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
int phy_count = dra7xx->phy_count;
int ret;
int i;
for (i = 0; i < phy_count; i++) {
ret = phy_init(dra7xx->phy[i]);
if (ret < 0)
goto err_phy;
ret = phy_power_on(dra7xx->phy[i]);
if (ret < 0) {
phy_exit(dra7xx->phy[i]);
goto err_phy;
}
}
return 0;
err_phy:
while (--i >= 0) {
phy_power_off(dra7xx->phy[i]);
phy_exit(dra7xx->phy[i]);
}
return ret;
}
开发者ID:AK101111，项目名称:linux，代码行数:29，代码来源:pci-dra7xx.c
示例8: ssusb_phy_power_off
static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
{
unsigned int i;
for (i = 0; i < ssusb->num_phys; i++)
phy_power_off(ssusb->phys[i]);
}
开发者ID:ReneNyffenegger，项目名称:linux，代码行数:7，代码来源:mtu3_plat.c
示例9: exynos_dp_bridge_disable
static void exynos_dp_bridge_disable(struct drm_bridge *bridge)
{
struct exynos_dp_device *dp = bridge->driver_private;
struct exynos_drm_crtc *crtc = dp_to_crtc(dp);
if (dp->dpms_mode != DRM_MODE_DPMS_ON)
return;
if (dp->panel) {
if (drm_panel_disable(dp->panel)) {
DRM_ERROR("failed to disable the panel\n");
return;
}
}
disable_irq(dp->irq);
flush_work(&dp->hotplug_work);
phy_power_off(dp->phy);
if (crtc->ops->clock_enable)
crtc->ops->clock_enable(dp_to_crtc(dp), false);
if (dp->panel) {
if (drm_panel_unprepare(dp->panel))
DRM_ERROR("failed to turnoff the panel\n");
}
pm_runtime_put_sync(dp->dev);
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
开发者ID:BigeyeDestroyer，项目名称:linux，代码行数:31，代码来源:exynos_dp_core.c
示例10: xhci_mtk_phy_power_off
static void xhci_mtk_phy_power_off(struct xhci_hcd_mtk *mtk)
{
unsigned int i;
for (i = 0; i < mtk->num_phys; i++)
phy_power_off(mtk->phys[i]);
}
开发者ID:mkrufky，项目名称:linux，代码行数:7，代码来源:xhci-mtk.c
示例11: ohci_da8xx_disable
static void ohci_da8xx_disable(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
phy_power_off(da8xx_ohci->usb11_phy);
phy_exit(da8xx_ohci->usb11_phy);
clk_disable_unprepare(da8xx_ohci->usb11_clk);
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:8，代码来源:ohci-da8xx.c
示例12: ufs_qcom_phy_exit
int ufs_qcom_phy_exit(struct phy *generic_phy)
{
struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
if (ufs_qcom_phy->is_powered_on)
phy_power_off(generic_phy);
return 0;
}
开发者ID:auras76，项目名称:aur-kernel-XZxx，代码行数:9，代码来源:phy-qcom-ufs.c
示例13: iproc_pcie_remove
int iproc_pcie_remove(struct iproc_pcie *pcie)
{
pci_stop_root_bus(pcie->root_bus);
pci_remove_root_bus(pcie->root_bus);
phy_power_off(pcie->phy);
phy_exit(pcie->phy);
return 0;
}
开发者ID:DenisLug，项目名称:mptcp，代码行数:10，代码来源:pcie-iproc.c
示例14: ufs_qcom_phy_remove
int ufs_qcom_phy_remove(struct phy *generic_phy,
struct ufs_qcom_phy *ufs_qcom_phy)
{
phy_power_off(generic_phy);
kfree(ufs_qcom_phy->vdda_pll.name);
kfree(ufs_qcom_phy->vdda_phy.name);
return 0;
}
开发者ID:auras76，项目名称:aur-kernel-XZxx，代码行数:10，代码来源:phy-qcom-ufs.c
示例15: omap2430_musb_exit
static int omap2430_musb_exit(struct musb *musb)
{
del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
phy_power_off(musb->phy);
phy_exit(musb->phy);
return 0;
}
开发者ID:19Dan01，项目名称:linux，代码行数:10，代码来源:omap2430.c
示例16: dra7xx_pcie_suspend_noirq
static int dra7xx_pcie_suspend_noirq(struct device *dev)
{
struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
int count = dra7xx->phy_count;
while (count--) {
phy_power_off(dra7xx->phy[count]);
phy_exit(dra7xx->phy[count]);
}
return 0;
}
开发者ID:AK101111，项目名称:linux，代码行数:12，代码来源:pci-dra7xx.c
示例17: dsps_musb_exit
static int dsps_musb_exit(struct musb *musb)
{
struct device *dev = musb->controller;
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
del_timer_sync(&musb->dev_timer);
phy_power_off(musb->phy);
phy_exit(musb->phy);
debugfs_remove_recursive(glue->dbgfs_root);
return 0;
}
开发者ID:the-snowwhite，项目名称:linux-socfpga，代码行数:12，代码来源:musb_dsps.c
示例18: exynos_dp_phy_exit
static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
{
if (dp->phy) {
phy_power_off(dp->phy);
} else if (dp->phy_addr) {
u32 reg;
reg = __raw_readl(dp->phy_addr);
reg &= ~(dp->enable_mask);
__raw_writel(reg, dp->phy_addr);
}
}
开发者ID:AdityaChaudhary，项目名称:linux，代码行数:12，代码来源:exynos_dp_core.c
示例19: dwc3_remove
static int dwc3_remove(struct platform_device *pdev)
{
struct dwc3 *dwc = platform_get_drvdata(pdev);
dwc3_debugfs_exit(dwc);
dwc3_core_exit_mode(dwc);
dwc3_event_buffers_cleanup(dwc);
dwc3_free_event_buffers(dwc);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
dwc3_core_exit(dwc);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
开发者ID:Felixneu，项目名称:Power-Management，代码行数:21，代码来源:core.c
示例20: ahci_platform_disable_resources
/**
* ahci_platform_disable_resources - Disable platform resources
* @hpriv: host private area to store config values
*
* This function disables all ahci_platform managed resources in the
* following order:
* 1) Phy
* 2) Clocks (through ahci_platform_disable_clks)
* 3) Regulator
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
if (hpriv->phy) {
phy_power_off(hpriv->phy);
phy_exit(hpriv->phy);
}
ahci_platform_disable_clks(hpriv);
if (hpriv->target_pwr)
regulator_disable(hpriv->target_pwr);
}
开发者ID:24hours，项目名称:linux，代码行数:22，代码来源:libahci_platform.c
注：本文中的phy_power_off函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论