C++ phy_driver_register函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中phy_driver_register函数的典型用法代码示例。如果您正苦于以下问题：C++ phy_driver_register函数的具体用法？C++ phy_driver_register怎么用？C++ phy_driver_register使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了phy_driver_register函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: broadcom_init

static int __init broadcom_init(void)
{
    int ret;

    ret = phy_driver_register(&bcm5411_driver);
    if (ret)
        goto out_5411;
    ret = phy_driver_register(&bcm5421_driver);
    if (ret)
        goto out_5421;
    ret = phy_driver_register(&bcm5461_driver);
    if (ret)
        goto out_5461;
    ret = phy_driver_register(&bcm5481_driver);
    if (ret)
        goto out_5481;
    return ret;

out_5481:
    phy_driver_unregister(&bcm5461_driver);
out_5461:
    phy_driver_unregister(&bcm5421_driver);
out_5421:
    phy_driver_unregister(&bcm5411_driver);
out_5411:
    return ret;
}

开发者ID:mrtos，项目名称:Logitech-Revue，代码行数:27，代码来源:broadcom.c

示例2: ste10Xp_init

static int __init ste10Xp_init(void)
{
	int retval;

	retval = phy_driver_register(&ste100p_pdriver);
	if (retval < 0)
		return retval;
	return phy_driver_register(&ste101p_pdriver);
}

开发者ID:amalrajt，项目名称:linux-sh4-2.6.23.17_stm23_A18B，代码行数:9，代码来源:ste10Xp.c

示例3: realtek_init

static int __init realtek_init(void)
{
	int ret;

	ret = phy_driver_register(&rtl8211b_driver);
	if (ret < 0)
		return -ENODEV;
	return phy_driver_register(&rtl8211e_driver);
}

开发者ID:magnusjjj，项目名称:android_kernel_huawei_rle，代码行数:9，代码来源:realtek.c

示例4: icplus_init

static int __init icplus_init(void)
{
	int ret = 0;

	ret = phy_driver_register(&ip1001_driver);
	if (ret < 0)
		return -ENODEV;

	return phy_driver_register(&ip175c_driver);
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:10，代码来源:icplus.c

示例5: vsc82xx_init

static int __init vsc82xx_init(void)
{
	int err;

	err = phy_driver_register(&vsc8244_driver);
	if (err < 0)
		return err;
	err = phy_driver_register(&vsc8221_driver);
	if (err < 0)
		phy_driver_unregister(&vsc8244_driver);
	return err;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:12，代码来源:vitesse.c

示例6: realtek_init

static int __init realtek_init(void)
{
	int ret;

	ret = phy_driver_register(&rtl821x_driver);

	return ret;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:8，代码来源:realtek.c

示例7: bcm63xx_phy_init

static int __init bcm63xx_phy_init(void)
{
	int ret;

	ret = phy_driver_register(&bcm63xx_1_driver);
	if (ret)
		goto out_63xx_1;
	ret = phy_driver_register(&bcm63xx_2_driver);
	if (ret)
		goto out_63xx_2;
	return ret;

out_63xx_2:
	phy_driver_unregister(&bcm63xx_1_driver);
out_63xx_1:
	return ret;
}

开发者ID:3null，项目名称:fastsocket，代码行数:17，代码来源:bcm63xx.c

示例8: micrel_phy_init

static int __init micrel_phy_init(void)
{
	int ret;

	ret = phy_driver_register(&ksz8041_phy_driver);

	return ret;
}

开发者ID:amalrajt，项目名称:linux-sh4-2.6.23.17_stm23_A18B，代码行数:8，代码来源:micrel.c

示例9: lxt_init

static int __init lxt_init(void)
{
	int ret;

	ret = phy_driver_register(&lxt970_driver);
	if (ret)
		goto err1;

	ret = phy_driver_register(&lxt971_driver);
	if (ret)
		goto err2;
	return 0;

 err2:	
	phy_driver_unregister(&lxt970_driver);
 err1:
	return ret;
}

开发者ID:kronenpj，项目名称:samsung-s3c6410-android.2.0，代码行数:18，代码来源:lxt.c

示例10: cicada_init

static int __init cicada_init(void)
{
	int ret;

	ret = phy_driver_register(&cis8204_driver);
	if (ret)
		goto err1;

	ret = phy_driver_register(&cis8201_driver);
	if (ret)
		goto err2;
	return 0;

err2:
	phy_driver_unregister(&cis8204_driver);
err1:
	return ret;
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel-m3，代码行数:18，代码来源:cicada.c

示例11: atheros_init

static int __init atheros_init(void)
{
	int ret;

	ret = phy_driver_register(&ar8035_driver);
	if (ret < 0)
		pr_warn("AR8035: phy_driver_register is error\n");

	return ret;
}

开发者ID:sonoble，项目名称:linux-3.8.13，代码行数:10，代码来源:atheros.c

示例12: am79c_init

static int __init am79c_init(void)
{
	int ret;

	ret = phy_driver_register(&am79c_driver);
	if (ret)
		return ret;

	return 0;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:10，代码来源:amd.c

示例13: atheros_init

static int __init atheros_init(void)
{
	int ret;

	ret = phy_driver_register(&at8035_driver);
	if (ret)
		goto err1;

	ret = phy_driver_register(&at8030_driver);
	if (ret)
		goto err2;

	return 0;

err2:
	phy_driver_unregister(&at8035_driver);
err1:
	return ret;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:19，代码来源:at803x.c

示例14: vsc848x_mod_init

static int __init vsc848x_mod_init(void)
{
	int rv;

	rv = platform_driver_register(&mdio_mux_gpio_driver);
	if (rv)
		return rv;

	rv = phy_driver_register(&vsc848x_phy_driver);

	return rv;
}

开发者ID:garyvan，项目名称:openwrt-1.6，代码行数:12，代码来源:vsc848x.c

示例15: b53_phy_driver_register

int __init b53_phy_driver_register(void)
{
	int ret;

	ret = phy_driver_register(&b53_phy_driver_id1);
	if (ret)
		return ret;

	ret = phy_driver_register(&b53_phy_driver_id2);
	if (ret)
		goto err1;

	ret = phy_driver_register(&b53_phy_driver_id3);
	if (!ret)
		return 0;

	phy_driver_unregister(&b53_phy_driver_id2);
err1:
	phy_driver_unregister(&b53_phy_driver_id1);
	return ret;
}

开发者ID:2812015651，项目名称:cuckoo，代码行数:21，代码来源:b53_mdio.c

示例16: phy_init

static int __init phy_init(void)
{
	int rc;

	rc = mdio_bus_init();
	if (rc)
		return rc;

	rc = phy_driver_register(&genphy_driver);
	if (rc)
		mdio_bus_exit();

	return rc;
}

开发者ID:Tigrouzen，项目名称:k1099，代码行数:14，代码来源:phy_device.c

示例17: davicom_init

static int __init davicom_init(void)
{
	int ret;

	ret = phy_driver_register(&dm9161e_driver);
	if (ret)
		goto err1;

	ret = phy_driver_register(&dm9161a_driver);
	if (ret)
		goto err2;

	ret = phy_driver_register(&dm9131_driver);
	if (ret)
		goto err3;
	return 0;

 err3:
	phy_driver_unregister(&dm9161a_driver);
 err2:
	phy_driver_unregister(&dm9161e_driver);
 err1:
	return ret;
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:24，代码来源:davicom.c

示例18: marvell_init

static int __init marvell_init(void)
{
	int ret;

	ret = phy_driver_register(&m88e1101_driver);
	if (ret)
		return ret;

	ret = phy_driver_register(&m88e1111s_driver);
	if (ret)
		goto err1111s;

	ret = phy_driver_register(&m88e1145_driver);
	if (ret)
		goto err1145;

	return 0;

      err1145:
	phy_driver_unregister(&m88e1111s_driver);
      err1111s:
	phy_driver_unregister(&m88e1101_driver);
	return ret;
}

开发者ID:StephenMacras，项目名称:dsl-n55u-bender，代码行数:24，代码来源:marvell.c

示例19: marvell_init

static int __init marvell_init(void)
{
	int ret;
	int i;

	for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
		ret = phy_driver_register(&marvell_drivers[i]);

		if (ret) {
			while (i-- > 0)
				phy_driver_unregister(&marvell_drivers[i]);
			return ret;
		}
	}

	return 0;
}

开发者ID:AppEngine，项目名称:linux-2.6，代码行数:17，代码来源:marvell.c

示例20: fixed_init

static int __init fixed_init(void)
{
	int ret;
	int duplex = 0;

	/* register on the bus... Not expected to be matched with anything there... */
	phy_driver_register(&fixed_mdio_driver);

	/* So let the fun begin...
	   We will create several mdio devices here, and will bound the upper
	   driver to them.

	   Then the external software can lookup the phy bus by searching
	   [email protected]:duplex, e.g. [email protected]:1, to be connected to the
	   virtual 100M Fdx phy.

	   In case several virtual PHYs required, the bus_id will be in form
	   fixed_<num>@<speed>:<duplex>, which make it able even to define
	   driver-specific link control callback, if for instance PHY is completely
	   SW-driven.

	*/

#ifdef CONFIG_FIXED_MII_DUPLEX
	duplex = 1;
#endif

#ifdef CONFIG_FIXED_MII_100_FDX
	fixed_mdio_register_device(0, 100, 1);
#endif

#ifdef CONFIX_FIXED_MII_10_FDX
	fixed_mdio_register_device(0, 10, 1);
#endif
	return 0;
}

开发者ID:xf739645524，项目名称:kernel-rhel5，代码行数:36，代码来源:fixed.c

注：本文中的phy_driver_register函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。