C++ ph_command函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ph_command函数的典型用法代码示例。如果您正苦于以下问题：C++ ph_command函数的具体用法？C++ ph_command怎么用？C++ ph_command使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ph_command函数的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: initW6692

void __init initW6692(struct IsdnCardState *cs, int part)
{
	if (part & 1) {
		cs->tqueue.routine = (void *) (void *) W6692_bh;
		cs->setstack_d = setstack_W6692;
		cs->DC_Close = DC_Close_W6692;
		cs->dbusytimer.function = (void *) dbusy_timer_handler;
		cs->dbusytimer.data = (long) cs;
		init_timer(&cs->dbusytimer);
		resetW6692(cs);
		ph_command(cs, W_L1CMD_RST);
		cs->dc.w6692.ph_state = W_L1CMD_RST;
		W6692_new_ph(cs);
		ph_command(cs, W_L1CMD_ECK);

		cs->bcs[0].BC_SetStack = setstack_w6692;
		cs->bcs[1].BC_SetStack = setstack_w6692;
		cs->bcs[0].BC_Close = close_w6692state;
		cs->bcs[1].BC_Close = close_w6692state;
		W6692Bmode(cs->bcs, 0, 0);
		W6692Bmode(cs->bcs + 1, 0, 0);
	}
	if (part & 2) {
		/* Reenable all IRQ */
		cs->writeW6692(cs, W_IMASK, 0x18);
		cs->writeW6692(cs, W_D_EXIM, 0x00);
		cs->BC_Write_Reg(cs, 0, W_B_EXIM, 0x00);
		cs->BC_Write_Reg(cs, 1, W_B_EXIM, 0x00);
		/* Reset D-chan receiver and transmitter */
		cs->writeW6692(cs, W_D_CMDR, W_D_CMDR_RRST | W_D_CMDR_XRST);
	}
}

开发者ID:jameshilliard，项目名称:actiontec_opensource_mi424wr-rev-acd-56-0-10-14-4，代码行数:32，代码来源:w6692.c

示例2: initW6692

void initW6692(struct w6692_hw *card)
{
	u8	val;

	card->dch.timer.function = (void *)dbusy_timer_handler;
	card->dch.timer.data = (u_long)&card->dch;
	init_timer(&card->dch.timer);
	w6692_mode(&card->bc[0], ISDN_P_NONE);
	w6692_mode(&card->bc[1], ISDN_P_NONE);
	WriteW6692(card, W_D_CTL, 0x00);
	disable_hwirq(card);
	WriteW6692(card, W_D_SAM, 0xff);
	WriteW6692(card, W_D_TAM, 0xff);
	WriteW6692(card, W_D_MODE, W_D_MODE_RACT);
	card->state = W_L1CMD_RST;
	ph_command(card, W_L1CMD_RST);
	ph_command(card, W_L1CMD_ECK);
	/* enable all IRQ but extern */
	card->imask = 0x18;
	WriteW6692(card, W_D_EXIM, 0x00);
	WriteW6692B(&card->bc[0], W_B_EXIM, 0);
	WriteW6692B(&card->bc[1], W_B_EXIM, 0);
	/* Reset D-chan receiver and transmitter */
	WriteW6692(card, W_D_CMDR, W_D_CMDR_RRST | W_D_CMDR_XRST);
	/* Reset B-chan receiver and transmitter */
	WriteW6692B(&card->bc[0], W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_XRST);
	WriteW6692B(&card->bc[1], W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_XRST);
	/* enable peripheral */
	if (card->subtype == W6692_USR) {
		/* seems that USR implemented some power control features
		 * Pin 79 is connected to the oscilator circuit so we
		 * have to handle it here
		 */
		card->pctl = 0x80;
		card->xdata = 0;
		WriteW6692(card, W_PCTL, card->pctl);
		WriteW6692(card, W_XDATA, card->xdata);
	} else {
		card->pctl = W_PCTL_OE5 | W_PCTL_OE4 | W_PCTL_OE2 |
			W_PCTL_OE1 | W_PCTL_OE0;
		card->xaddr = 0x00;/* all sw off */
		if (card->fmask & pots)
			card->xdata |= 0x06;	/*  POWER UP/ LED OFF / ALAW */
		if (card->fmask & led)
			card->xdata |= 0x04;	/* LED OFF */
		if ((card->fmask & pots) || (card->fmask & led)) {
			WriteW6692(card, W_PCTL, card->pctl);
			WriteW6692(card, W_XADDR, card->xaddr);
			WriteW6692(card, W_XDATA, card->xdata);
			val = ReadW6692(card, W_XADDR);
			if (debug & DEBUG_HW)
				pr_notice("%s: W_XADDR=%02x\n",
					card->name, val);
		}
	}
}

开发者ID:1111saeid，项目名称:jb_kernel_3.0.16_htc_golfu，代码行数:56，代码来源:w6692.c

示例3: icc_new_ph

static void
icc_new_ph(struct IsdnCardState *cs)
{
	switch (cs->dc.icc.ph_state) {
		case (ICC_IND_EI1):
			ph_command(cs, ICC_CMD_DI);
			l1_msg(cs, HW_RESET | INDICATION, NULL);
			break;
		case (ICC_IND_DC):
			l1_msg(cs, HW_DEACTIVATE | CONFIRM, NULL);
			break;
		case (ICC_IND_DR):
			l1_msg(cs, HW_DEACTIVATE | INDICATION, NULL);
			break;
		case (ICC_IND_PU):
			l1_msg(cs, HW_POWERUP | CONFIRM, NULL);
			break;
		case (ICC_IND_FJ):
			l1_msg(cs, HW_RSYNC | INDICATION, NULL);
			break;
		case (ICC_IND_AR):
			l1_msg(cs, HW_INFO2 | INDICATION, NULL);
			break;
		case (ICC_IND_AI):
			l1_msg(cs, HW_INFO4 | INDICATION, NULL);
			break;
		default:
			break;
	}
}

开发者ID:appleorange1，项目名称:asus-rt-n12-lx，代码行数:30，代码来源:icc.c

示例4: W6692_new_ph

static void
W6692_new_ph(struct IsdnCardState *cs)
{
	switch (cs->dc.w6692.ph_state) {
		case (W_L1CMD_RST):
			ph_command(cs, W_L1CMD_DRC);
			l1_msg(cs, HW_RESET | INDICATION, NULL);
			/* fallthru */
		case (W_L1IND_CD):
			l1_msg(cs, HW_DEACTIVATE | CONFIRM, NULL);
			break;
		case (W_L1IND_DRD):
			l1_msg(cs, HW_DEACTIVATE | INDICATION, NULL);
			break;
		case (W_L1IND_CE):
			l1_msg(cs, HW_POWERUP | CONFIRM, NULL);
			break;
		case (W_L1IND_LD):
			l1_msg(cs, HW_RSYNC | INDICATION, NULL);
			break;
		case (W_L1IND_ARD):
			l1_msg(cs, HW_INFO2 | INDICATION, NULL);
			break;
		case (W_L1IND_AI8):
			l1_msg(cs, HW_INFO4_P8 | INDICATION, NULL);
			break;
		case (W_L1IND_AI10):
			l1_msg(cs, HW_INFO4_P10 | INDICATION, NULL);
			break;
		default:
			break;
	}
}

开发者ID:jameshilliard，项目名称:actiontec_opensource_mi424wr-rev-acd-56-0-10-14-4，代码行数:33，代码来源:w6692.c

示例5: l1_timer3

static void l1_timer3(struct FsmInst *fi, int event, void *arg)
{
	struct isac *isac = fi->userdata;

	ph_command(isac, ISAC_CMD_DI);
	D_L1L2(isac, PH_DEACTIVATE | INDICATION, NULL);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:7，代码来源:hisax_isac.c

示例6: l1_ar8

static void l1_ar8(struct FsmInst *fi, int event, void *arg)
{
	struct isac *isac = fi->userdata;

	FsmRestartTimer(&isac->timer, TIMER3_VALUE, EV_TIMER3, NULL, 2);
	ph_command(isac, ISAC_CMD_AR8);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:7，代码来源:hisax_isac.c

示例7: l1_go_f3pend

static void l1_go_f3pend(struct FsmInst *fi, int event, void *arg)
{
	struct isac *isac = fi->userdata;

	FsmChangeState(fi, ST_L1_F3_PEND_DEACT);
	ph_command(isac, ISAC_CMD_DI);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:7，代码来源:hisax_isac.c

示例8: l1_di

static void l1_di(struct FsmInst *fi, int event, void *arg)
{
	struct isac *isac = fi->userdata;

	FsmChangeState(fi, ST_L1_RESET);
	ph_command(isac, ISAC_CMD_DI);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:7，代码来源:hisax_isac.c

示例9: isac_new_ph

static void
isac_new_ph(struct IsdnCardState *cs)
{
	switch (cs->dc.isac.ph_state) {
		case (ISAC_IND_RS):
		case (ISAC_IND_EI):
			ph_command(cs, ISAC_CMD_DUI);
			l1_msg(cs, HW_RESET | INDICATION, NULL);
			break;
		case (ISAC_IND_DID):
			l1_msg(cs, HW_DEACTIVATE | CONFIRM, NULL);
			break;
		case (ISAC_IND_DR):
			l1_msg(cs, HW_DEACTIVATE | INDICATION, NULL);
			break;
		case (ISAC_IND_PU):
			l1_msg(cs, HW_POWERUP | CONFIRM, NULL);
			break;
		case (ISAC_IND_RSY):
			l1_msg(cs, HW_RSYNC | INDICATION, NULL);
			break;
		case (ISAC_IND_ARD):
			l1_msg(cs, HW_INFO2 | INDICATION, NULL);
			break;
		case (ISAC_IND_AI8):
			l1_msg(cs, HW_INFO4_P8 | INDICATION, NULL);
			break;
		case (ISAC_IND_AI10):
			l1_msg(cs, HW_INFO4_P10 | INDICATION, NULL);
			break;
		default:
			break;
	}
}

开发者ID:WiseMan787，项目名称:ralink_sdk，代码行数:34，代码来源:isac.c

示例10: l1_go_f3pend_deact_ind

static void l1_go_f3pend_deact_ind(struct FsmInst *fi, int event, void *arg)
{
	struct isac *isac = fi->userdata;

	FsmChangeState(fi, ST_L1_F3_PEND_DEACT);
	D_L1L2(isac, PH_DEACTIVATE | INDICATION, NULL);
	ph_command(isac, ISAC_CMD_DI);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:8，代码来源:hisax_isac.c

示例11: l1_go_f7_act_ind

static void l1_go_f7_act_ind(struct FsmInst *fi, int event, void *arg)
{
	struct isac *isac = fi->userdata;

	FsmDelTimer(&isac->timer, 0);
	FsmChangeState(fi, ST_L1_F7);
	ph_command(isac, ISAC_CMD_AR8);
	D_L1L2(isac, PH_ACTIVATE | INDICATION, NULL);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:9，代码来源:hisax_isac.c

示例12: isac_ph_state_change

static void
isac_ph_state_change(struct isac_hw *isac)
{
	switch (isac->state) {
	case (ISAC_IND_RS):
	case (ISAC_IND_EI):
		ph_command(isac, ISAC_CMD_DUI);
	}
	schedule_event(&isac->dch, FLG_PHCHANGE);
}

开发者ID:Epirex，项目名称:Chrono_Kernel-1，代码行数:10，代码来源:mISDNipac.c

示例13: W6692_l1hw

static void
W6692_l1hw(struct PStack *st, int pr, void *arg)
{
	struct IsdnCardState *cs = (struct IsdnCardState *) st->l1.hardware;
	struct sk_buff *skb = arg;
	int val;

	switch (pr) {
		case (PH_DATA | REQUEST):
			if (cs->debug & DEB_DLOG_HEX)
				LogFrame(cs, skb->data, skb->len);
			if (cs->debug & DEB_DLOG_VERBOSE)
				dlogframe(cs, skb, 0);
			if (cs->tx_skb) {
				skb_queue_tail(&cs->sq, skb);
#ifdef L2FRAME_DEBUG		/* psa */
				if (cs->debug & L1_DEB_LAPD)
					Logl2Frame(cs, skb, "PH_DATA Queued", 0);
#endif
			} else {
				cs->tx_skb = skb;
				cs->tx_cnt = 0;
#ifdef L2FRAME_DEBUG		/* psa */
				if (cs->debug & L1_DEB_LAPD)
					Logl2Frame(cs, skb, "PH_DATA", 0);
#endif
				W6692_fill_fifo(cs);
			}
			break;
		case (PH_PULL | INDICATION):
			if (cs->tx_skb) {
				if (cs->debug & L1_DEB_WARN)
					debugl1(cs, " l2l1 tx_skb exist this shouldn't happen");
				skb_queue_tail(&cs->sq, skb);
				break;
			}
			if (cs->debug & DEB_DLOG_HEX)
				LogFrame(cs, skb->data, skb->len);
			if (cs->debug & DEB_DLOG_VERBOSE)
				dlogframe(cs, skb, 0);
			cs->tx_skb = skb;
			cs->tx_cnt = 0;
#ifdef L2FRAME_DEBUG		/* psa */
			if (cs->debug & L1_DEB_LAPD)
				Logl2Frame(cs, skb, "PH_DATA_PULLED", 0);
#endif
			W6692_fill_fifo(cs);
			break;
		case (PH_PULL | REQUEST):
#ifdef L2FRAME_DEBUG		/* psa */
			if (cs->debug & L1_DEB_LAPD)
				debugl1(cs, "-> PH_REQUEST_PULL");
#endif
			if (!cs->tx_skb) {
				test_and_clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
				st->l1.l1l2(st, PH_PULL | CONFIRM, NULL);
			} else
				test_and_set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
			break;
		case (HW_RESET | REQUEST):
			if ((cs->dc.w6692.ph_state == W_L1IND_DRD))
				ph_command(cs, W_L1CMD_ECK);
			else {
				ph_command(cs, W_L1CMD_RST);
				cs->dc.w6692.ph_state = W_L1CMD_RST;
				W6692_new_ph(cs);
			}
			break;
		case (HW_ENABLE | REQUEST):
			ph_command(cs, W_L1CMD_ECK);
			break;
		case (HW_INFO3 | REQUEST):
			ph_command(cs, W_L1CMD_AR8);
			break;
		case (HW_TESTLOOP | REQUEST):
			val = 0;
			if (1 & (long) arg)
				val |= 0x0c;
			if (2 & (long) arg)
				val |= 0x3;
			/* !!! not implemented yet */
			break;
		case (HW_DEACTIVATE | RESPONSE):
			skb_queue_purge(&cs->rq);
			skb_queue_purge(&cs->sq);
			if (cs->tx_skb) {
				dev_kfree_skb_any(cs->tx_skb);
				cs->tx_skb = NULL;
			}
			if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
				del_timer(&cs->dbusytimer);
			if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
				W6692_sched_event(cs, D_CLEARBUSY);
			break;
		default:
			if (cs->debug & L1_DEB_WARN)
				debugl1(cs, "W6692_l1hw unknown %04x", pr);
			break;
	}
}

开发者ID:jameshilliard，项目名称:actiontec_opensource_mi424wr-rev-acd-56-0-10-14-4，代码行数:100，代码来源:w6692.c

注：本文中的ph_command函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ phalcon_array_fetch函数代码示例发布时间：2022-05-30

C++ pgstat_fetch_stat_tabentry函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19220|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ ph_command函数代码示例

示例1: initW6692

示例2: initW6692

示例3: icc_new_ph

示例4: W6692_new_ph

示例5: l1_timer3

示例6: l1_ar8

示例7: l1_go_f3pend

示例8: l1_di

示例9: isac_new_ph

示例10: l1_go_f3pend_deact_ind

示例11: l1_go_f7_act_ind

示例12: isac_ph_state_change

示例13: W6692_l1hw

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

谈谈matlab中的uint8和double（转） - Rege

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053