C++ pgd_bad函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pgd_bad函数的典型用法代码示例。如果您正苦于以下问题：C++ pgd_bad函数的具体用法？C++ pgd_bad怎么用？C++ pgd_bad使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pgd_bad函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: m4u_v2p_new

int m4u_v2p_new(unsigned int va)
{
   unsigned int pmdOffset = (va & (PMD_SIZE - 1));
   unsigned int pageOffset = (va & (PAGE_SIZE - 1));
   pgd_t *pgd;
   pmd_t *pmd;
   pte_t *pte;
   unsigned int pa;
   printk("Enter m4u_user_v2p()! 0x%x\n", va);
   
   pgd = pgd_offset(current->mm, va); /* what is tsk->mm */
   printk("m4u_user_v2p(), pgd 0x%x\n", pgd);    
   printk("pgd_none=%d, pgd_bad=%d\n", pgd_none(*pgd), pgd_bad(*pgd));
   
   if(pgd_none(*pgd)||pgd_bad(*pgd))
   {
      printk("Error: m4u_user_v2p(), virtual addr 0x%x, pgd invalid! \n", va);
      return 0;
   }
   
   pmd = pmd_offset(pgd, va);
   printk("m4u_user_v2p(), pmd 0x%x\n", pmd);
   printk("pmd_none=%d, pmd_bad=%d, pmd_val=0x%x\n", pmd_none(*pmd), pmd_bad(*pmd), pmd_val(*pmd));
   
   
   /* If this is a page table entry, keep on walking to the next level */ 
   if (( (unsigned int)pmd_val(*pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
   {
      if(pmd_none(*pmd)||pmd_bad(*pmd))
      {
         printk("Error: m4u_user_v2p(), virtual addr 0x%x, pmd invalid! \n", va);
         return 0;
      }
      
      pte = pte_offset_map(pmd, va);
      printk("m4u_user_v2p(), pte 0x%x\n", pte);
      if(pte_present(*pte)) 
      { 
         pa=(pte_val(*pte) & (PAGE_MASK)) | pageOffset; 
         printk("PA = 0x%8x\n", pa);
         return pa; 
      }
   }
   else /* Only 1 level page table */
   {
      if(pmd_none(*pmd))
      {
         printk("Error: m4u_user_v2p(), virtual addr 0x%x, pmd invalid! \n", va);
         return 0;
      }
      pa=(pte_val(*pmd) & (PMD_MASK)) | pmdOffset; 
      printk("PA = 0x%8x\n", pa);
      return pa;

   }
   
   return 0;   
}

开发者ID:SelfImp，项目名称:m75，代码行数:58，代码来源:vdec.c

示例2: copy_pmd_range

static inline int copy_pmd_range(pgd_t *dst_pgd, pgd_t *src_pgd, unsigned long address, unsigned long size, int cow)
{
	pmd_t * src_pmd, * dst_pmd;
	unsigned long end;
	int error = 0;

	if (pgd_none(*src_pgd))
		return 0;
	if (pgd_bad(*src_pgd)) {
		printk("copy_pmd_range: bad pgd (%08lx)\n", pgd_val(*src_pgd));
		pgd_clear(src_pgd);
		return 0;
	}
	src_pmd = pmd_offset(src_pgd, address);
	if (pgd_none(*dst_pgd)) {
		if (!pmd_alloc(dst_pgd, 0))
			return -ENOMEM;
	}
	dst_pmd = pmd_offset(dst_pgd, address);
	address &= ~PGDIR_MASK;
	end = address + size;
	if (end > PGDIR_SIZE)
		end = PGDIR_SIZE;
	do {
		error = copy_pte_range(dst_pmd++, src_pmd++, address, end - address, cow);
		if (error)
			break;
		address = (address + PMD_SIZE) & PMD_MASK; 
	} while (address < end);
	return error;
}

开发者ID:shattered，项目名称:linux-m68k，代码行数:31，代码来源:memory.c

示例3: partial_clear

/*
 * This function zeroes out partial mmap'ed pages at truncation time..
 */
static void partial_clear(struct vm_area_struct *vma, unsigned long address)
{
	pgd_t *page_dir;
	pmd_t *page_middle;
	pte_t *page_table, pte;

	page_dir = pgd_offset(vma->vm_mm, address);
	if (pgd_none(*page_dir))
		return;
	if (pgd_bad(*page_dir)) {
		printk("bad page table directory entry %p:[%lx]\n", page_dir, pgd_val(*page_dir));
		pgd_clear(page_dir);
		return;
	}
	page_middle = pmd_offset(page_dir, address);
	if (pmd_none(*page_middle))
		return;
	if (pmd_bad(*page_middle)) {
		printk("bad page table directory entry %p:[%lx]\n", page_dir, pgd_val(*page_dir));
		pmd_clear(page_middle);
		return;
	}
	page_table = pte_offset(page_middle, address);
	pte = *page_table;
	if (!pte_present(pte))
		return;
	flush_cache_page(vma, address);
	address &= ~PAGE_MASK;
	address += pte_page(pte);
	if (address >= high_memory)
		return;
	memset((void *) address, 0, PAGE_SIZE - (address & ~PAGE_MASK));
	flush_page_to_ram(pte_page(pte));
}

开发者ID:shattered，项目名称:linux-m68k，代码行数:37，代码来源:memory.c

示例4: shmedia_unmapioaddr

static void shmedia_unmapioaddr(unsigned long vaddr)
{
	pgd_t *pgdp;
	pud_t *pudp;
	pmd_t *pmdp;
	pte_t *ptep;

	pgdp = pgd_offset_k(vaddr);
	if (pgd_none(*pgdp) || pgd_bad(*pgdp))
		return;

	pudp = pud_offset(pgdp, vaddr);
	if (pud_none(*pudp) || pud_bad(*pudp))
		return;

	pmdp = pmd_offset(pudp, vaddr);
	if (pmd_none(*pmdp) || pmd_bad(*pmdp))
		return;

	ptep = pte_offset_kernel(pmdp, vaddr);

	if (pte_none(*ptep) || !pte_present(*ptep))
		return;

	clear_page((void *)ptep);
	pte_clear(&init_mm, vaddr, ptep);
}

开发者ID:mobilipia，项目名称:iods，代码行数:27，代码来源:ioremap_64.c

示例5: remove_mapping_pmd_range

static inline void
remove_mapping_pmd_range (pgd_t *pgd, unsigned long address, unsigned long size)
{
	pmd_t *pmd;
	unsigned long end;

	if (pgd_none (*pgd))
		return;

	if (pgd_bad (*pgd)){
		printk ("remove_graphics_pmd_range: bad pgd (%08lx)\n", pgd_val (*pgd));
		pgd_clear (pgd);
		return;
	}
	pmd = pmd_offset (pgd, address);
	address &= ~PGDIR_MASK;
	end = address + size;
	if (end > PGDIR_SIZE)
		end = PGDIR_SIZE;
	do {
		remove_mapping_pte_range (pmd, address, end - address);
		address = (address + PMD_SIZE) & PMD_MASK;
		pmd++;
	} while (address < end);
		
}

开发者ID:dmgerman，项目名称:linux-pre-history，代码行数:26，代码来源:umap.c

示例6: unswap_pgd

static inline void unswap_pgd(struct vm_area_struct * vma, pgd_t *dir,
			      unsigned long address, unsigned long size,
			      unsigned long entry, unsigned long page
			      /* , int isswap */)
{
	pmd_t * pmd;
	unsigned long offset, end;

	if (pgd_none(*dir))
		return;
	if (pgd_bad(*dir)) {
		printk("unswap_pgd: bad pgd (%08lx)\n", pgd_val(*dir));
		pgd_clear(dir);
		return;
	}
	pmd = pmd_offset(dir, address);
	offset = address & PGDIR_MASK;
	address &= ~PGDIR_MASK;
	end = address + size;
	if (end > PGDIR_SIZE)
		end = PGDIR_SIZE;
	do {
		unswap_pmd(vma, pmd, address, end - address, offset, entry,
			   page /* , isswap */);
		address = (address + PMD_SIZE) & PMD_MASK;
		pmd++;
	} while (address < end);
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:28，代码来源:stram.c

示例7: unuse_pgd

static inline int unuse_pgd(struct vm_area_struct * vma, pgd_t *dir,
	unsigned long address, unsigned long size,
	unsigned int type, unsigned long page)
{
	pmd_t * pmd;
	unsigned long offset, end;

	if (pgd_none(*dir))
		return 0;
	if (pgd_bad(*dir)) {
		printk("unuse_pgd: bad pgd (%08lx)\n", pgd_val(*dir));
		pgd_clear(dir);
		return 0;
	}
	pmd = pmd_offset(dir, address);
	offset = address & PGDIR_MASK;
	address &= ~PGDIR_MASK;
	end = address + size;
	if (end > PGDIR_SIZE)
		end = PGDIR_SIZE;
	do {
		if (unuse_pmd(vma, pmd, address, end - address, offset, type, page))
			return 1;
		address = (address + PMD_SIZE) & PMD_MASK;
		pmd++;
	} while (address < end);
	return 0;
}

开发者ID:shattered，项目名称:linux-m68k，代码行数:28，代码来源:swapfile.c

示例8: my_follow_page

static struct page* my_follow_page(struct vm_area_struct *vma, unsigned long addr) {
	pud_t *pud = NULL;
	pmd_t *pmd = NULL;
	pgd_t *pgd = NULL;
	pte_t *pte = NULL;
	spinlock_t *ptl = NULL;
	struct page* page = NULL;
	struct mm_struct *mm = current->mm;
	pgd = pgd_offset(current->mm, addr);
	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) {
		goto out;
	}
	pud = pud_offset(pgd, addr);
	if (pud_none(*pud) || unlikely(pud_bad(*pud))) {
		goto out;
	}
	printk("aaaa\n");
	pmd = pmd_offset(pud, addr);
	if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) {
		goto out;
	}
	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
	printk("bbbb\n");
	if (!pte) goto out;
	printk("cccc\n");
	if (!pte_present(*pte)) goto unlock;
	page = pfn_to_page(pte_pfn(*pte));
	if (!page) goto unlock;
	get_page(page);
unlock:
	pte_unmap_unlock(pte, ptl);
out:
	return page;
}

开发者ID:gowithqi，项目名称:linux_kernel_mm，代码行数:34，代码来源:zzq_vm.c

示例9: swap_out_pgd

static inline int swap_out_pgd(struct mm_struct * mm, struct vm_area_struct * vma, pgd_t *dir, unsigned long address, unsigned long end, int gfp_mask)
{
	pmd_t * pmd;
	unsigned long pgd_end;

	if (pgd_none(*dir))
		return 0;
	if (pgd_bad(*dir)) {
		pgd_ERROR(*dir);
		pgd_clear(dir);
		return 0;
	}

	pmd = pmd_offset(dir, address);

	pgd_end = (address + PGDIR_SIZE) & PGDIR_MASK;	
	if (pgd_end && (end > pgd_end))
		end = pgd_end;
	
	do {
		int result = swap_out_pmd(mm, vma, pmd, address, end, gfp_mask);
		if (result)
			return result;
		if (!mm->swap_cnt)
			return 0;
		address = (address + PMD_SIZE) & PMD_MASK;
		pmd++;
	} while (address && (address < end));
	return 0;
}

开发者ID:davidbau，项目名称:davej，代码行数:30，代码来源:vmscan.c

示例10: get_long

/*
 * This routine gets a long from any process space by following the page
 * tables. NOTE! You should check that the long isn't on a page boundary,
 * and that it is in the task area before calling this: this routine does
 * no checking.
 */
static unsigned long get_long(struct vm_area_struct * vma, unsigned long addr)
{
	pgd_t * pgdir;
	pte_t * pgtable;
	unsigned long page;

repeat:
	pgdir = PAGE_DIR_OFFSET(vma->vm_mm, addr);
	if (pgd_none(*pgdir)) {
		do_no_page(vma, addr, 0);
		goto repeat;
	}
	if (pgd_bad(*pgdir)) {
		printk("ptrace: bad page directory %08lx\n", pgd_val(*pgdir));
		pgd_clear(pgdir);
		return 0;
	}
	pgtable = (pte_t *) (PAGE_PTR(addr) + pgd_page(*pgdir));
	if (!pte_present(*pgtable)) {
		do_no_page(vma, addr, 0);
		goto repeat;
	}
	page = pte_page(*pgtable);
/* this is a hack for non-kernel-mapped video buffers and similar */
	if (page >= high_memory)
		return 0;
	page += addr & ~PAGE_MASK;
	return *(unsigned long *) page;
}

开发者ID:andreiw，项目名称:mkunity，代码行数:35，代码来源:ptrace.c

示例11: filemap_sync_pmd_range

static inline int filemap_sync_pmd_range(pgd_t * pgd,
	unsigned long address, unsigned long end, 
	struct vm_area_struct *vma, unsigned int flags)
{
	pmd_t * pmd;
	int error;

	if (pgd_none(*pgd))
		return 0;
	if (pgd_bad(*pgd)) {
		pgd_ERROR(*pgd);
		pgd_clear(pgd);
		return 0;
	}
	pmd = pmd_offset(pgd, address);
	if ((address & PGDIR_MASK) != (end & PGDIR_MASK))
		end = (address & PGDIR_MASK) + PGDIR_SIZE;
	error = 0;
	do {
		error |= filemap_sync_pte_range(pmd, address, end, vma, flags);
		address = (address + PMD_SIZE) & PMD_MASK;
		pmd++;
	} while (address && (address < end));
	return error;
}

开发者ID:BackupTheBerlios，项目名称:tuxap，代码行数:25，代码来源:msync.c

示例12: show_pte

/*
 * Dump out the page tables associated with 'addr' in mm 'mm'.
 */
void show_pte(struct mm_struct *mm, unsigned long addr)
{
    pgd_t *pgd;

    if (!mm)
        mm = &init_mm;

    pr_alert("pgd = %p\n", mm->pgd);
    pgd = pgd_offset(mm, addr);
    pr_alert("[%08lx] *pgd=%016llx", addr, pgd_val(*pgd));

    do {
        pud_t *pud;
        pmd_t *pmd;
        pte_t *pte;

        if (pgd_none(*pgd) || pgd_bad(*pgd))
            break;

        pud = pud_offset(pgd, addr);
        if (pud_none(*pud) || pud_bad(*pud))
            break;

        pmd = pmd_offset(pud, addr);
        printk(", *pmd=%016llx", pmd_val(*pmd));
        if (pmd_none(*pmd) || pmd_bad(*pmd))
            break;

        pte = pte_offset_map(pmd, addr);
        printk(", *pte=%016llx", pte_val(*pte));
        pte_unmap(pte);
    } while(0);

    printk("\n");
}

开发者ID:pranav01，项目名称:android_kernel_cyanogen_msm8916，代码行数:38，代码来源:fault.c

示例13: pin_page_for_write

static int
pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
{
	unsigned long addr = (unsigned long)_addr;
	pgd_t *pgd;
	pmd_t *pmd;
	pte_t *pte;
	pud_t *pud;
	spinlock_t *ptl;

	pgd = pgd_offset(current->mm, addr);
	if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
		return 0;

	pud = pud_offset(pgd, addr);
	if (unlikely(pud_none(*pud) || pud_bad(*pud)))
		return 0;

	pmd = pmd_offset(pud, addr);
	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
		return 0;

	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
	if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
	    !pte_write(*pte) || !pte_dirty(*pte))) {
		pte_unmap_unlock(pte, ptl);
		return 0;
	}

	*ptep = pte;
	*ptlp = ptl;

	return 1;
}

开发者ID:klothius，项目名称:htc_pyramid_kernel_30，代码行数:34，代码来源:uaccess_with_memcpy.c

示例14: imm_get_physical

u32
imm_get_physical(void *v, u32 immid)
{
	pmd_t *pmd;
	pte_t *pte;
	pgd_t *pgd;
	u32 val = 0, virtual = (u32)v;
	struct mm_struct* mm;

	if (IMMID_USER(immid))
		mm = current->mm;
	else
		mm = &init_mm;

	pgd = pgd_offset(mm, virtual);
	if (!pgd_none(*pgd) && !pgd_bad(*pgd)) {
		/* 1st level entry pointer */
		pmd = pmd_offset(pgd, virtual);
		if (!pmd_none(*pmd) && !pmd_bad(*pmd)) {
			/* 2nd level entry pointer */
			pte = pte_offset_kernel(pmd, virtual);
			if (pte) {
				val = (*(u32 *)((u32)pte-2048))&PAGE_MASK;
				val += virtual%PAGE_SIZE;
			}
		} else if (!pmd_none(*pmd)) {

开发者ID:12019，项目名称:kernel_zte_u880，代码行数:26，代码来源:policy.c

示例15: zap_pmd_range

static inline int zap_pmd_range(struct mm_struct *mm, pgd_t * dir, unsigned long address, unsigned long size)
{
	pmd_t * pmd;
	unsigned long end;
	int freed;

	if (pgd_none(*dir))
		return 0;
	if (pgd_bad(*dir)) {
		pgd_ERROR(*dir);
		pgd_clear(dir);
		return 0;
	}
	pmd = pmd_offset(dir, address);
	address &= ~PGDIR_MASK;
	end = address + size;
	if (end > PGDIR_SIZE)
		end = PGDIR_SIZE;
	freed = 0;
	do {
		freed += zap_pte_range(mm, pmd, address, end - address);
		address = (address + PMD_SIZE) & PMD_MASK; 
		pmd++;
	} while (address < end);
	return freed;
}

开发者ID:davidbau，项目名称:davej，代码行数:26，代码来源:memory.c

示例16: iterate_pmd

static inline void iterate_pmd(pgd_t * dir, unsigned long address,
                               unsigned long size, pte_iterator_t op,
                               unsigned long arg)
{
    pmd_t *pmd;
    unsigned long end;

    if (pgd_none(*dir))
        return;
    if (pgd_bad(*dir)) {
        pgd_ERROR(*dir);
        pgd_clear(dir);
        return;
    }
    pmd = pmd_offset(dir, address);
    address &= ~PGDIR_MASK;
    end = address + size;
    if (end > PGDIR_SIZE)
        end = PGDIR_SIZE;
    do {
        iterate_pte(pmd, address, end - address, op, arg);
        address = (address + PMD_SIZE) & PMD_MASK;
        pmd++;
    } while (address < end);
}

开发者ID:nhanh0，项目名称:hah，代码行数:25，代码来源:kmap.c

示例17: rtR0MemObjLinuxFixPte

/**
 * Replace the PFN of a PTE with the address of the actual page.
 *
 * The caller maps a reserved dummy page at the address with the desired access
 * and flags.
 *
 * This hack is required for older Linux kernels which don't provide
 * remap_pfn_range().
 *
 * @returns 0 on success, -ENOMEM on failure.
 * @param   mm          The memory context.
 * @param   ulAddr      The mapping address.
 * @param   Phys        The physical address of the page to map.
 */
static int rtR0MemObjLinuxFixPte(struct mm_struct *mm, unsigned long ulAddr, RTHCPHYS Phys)
{
    int rc = -ENOMEM;
    pgd_t *pgd;

    spin_lock(&mm->page_table_lock);

    pgd = pgd_offset(mm, ulAddr);
    if (!pgd_none(*pgd) && !pgd_bad(*pgd))
    {
        pmd_t *pmd = pmd_offset(pgd, ulAddr);
        if (!pmd_none(*pmd))
        {
            pte_t *ptep = pte_offset_map(pmd, ulAddr);
            if (ptep)
            {
                pte_t pte = *ptep;
                pte.pte_high &= 0xfff00000;
                pte.pte_high |= ((Phys >> 32) & 0x000fffff);
                pte.pte_low  &= 0x00000fff;
                pte.pte_low  |= (Phys & 0xfffff000);
                set_pte(ptep, pte);
                pte_unmap(ptep);
                rc = 0;
            }
        }

开发者ID:lskakaxi，项目名称:virtualbox-drv，代码行数:40，代码来源:memobj-r0drv-linux.c

示例18: follow_page

/*
 * Do a quick page-table lookup for a single page. 
 */
static struct page * follow_page(struct mm_struct *mm, unsigned long address, int write) 
{
	pgd_t *pgd;
	pmd_t *pmd;
	pte_t *ptep, pte;

	pgd = pgd_offset(mm, address);
	if (pgd_none(*pgd) || pgd_bad(*pgd))
		goto out;

	pmd = pmd_offset(pgd, address);
	if (pmd_none(*pmd) || pmd_bad(*pmd))
		goto out;

	ptep = pte_offset(pmd, address);
	if (!ptep)
		goto out;

	pte = *ptep;
	if (pte_present(pte)) {
		if (!write ||
		    (pte_write(pte) && pte_dirty(pte)))
			return pte_page(pte);
	}

out:
	return 0;
}

开发者ID:fgeraci，项目名称:cs518-sched，代码行数:31，代码来源:memory.c

示例19: get_phys_addr

static unsigned long get_phys_addr(struct task_struct * p, unsigned long ptr)
{
    pgd_t *page_dir;
    pmd_t *page_middle;
    pte_t pte;

    if (!p || !p->mm || ptr >= TASK_SIZE)
        return 0;
    page_dir = pgd_offset(p->mm,ptr);
    if (pgd_none(*page_dir))
        return 0;
    if (pgd_bad(*page_dir)) {
        printk("bad page directory entry %08lx\n", pgd_val(*page_dir));
        pgd_clear(page_dir);
        return 0;
    }
    page_middle = pmd_offset(page_dir,ptr);
    if (pmd_none(*page_middle))
        return 0;
    if (pmd_bad(*page_middle)) {
        printk("bad page middle entry %08lx\n", pmd_val(*page_middle));
        pmd_clear(page_middle);
        return 0;
    }
    pte = *pte_offset(page_middle,ptr);
    if (!pte_present(pte))
        return 0;
    return pte_page(pte) + (ptr & ~PAGE_MASK);
}

开发者ID:liexusong，项目名称:linux2.0-comment，代码行数:29，代码来源:array.c

示例20: pgd_offset

static inline pte_t *get_one_pte(struct mm_struct *mm, unsigned long addr)
{
	pgd_t * pgd;
	pmd_t * pmd;
	pte_t * pte = NULL;

	pgd = pgd_offset(mm, addr);
	if (pgd_none(*pgd))
		goto end;
	if (pgd_bad(*pgd)) {
		pgd_ERROR(*pgd);
		pgd_clear(pgd);
		goto end;
	}

	pmd = pmd_offset(pgd, addr);
	if (pmd_none(*pmd))
		goto end;
	if (pmd_bad(*pmd)) {
		pmd_ERROR(*pmd);
		pmd_clear(pmd);
		goto end;
	}

	pte = pte_offset(pmd, addr);
	if (pte_none(*pte))
		pte = NULL;
end:
	return pte;
}

开发者ID:JBTech，项目名称:ralink_rt5350，代码行数:30，代码来源:mremap.c

注：本文中的pgd_bad函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ pgd_free函数代码示例发布时间：2022-05-30

C++ pgd_alloc函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19221|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ pgd_bad函数代码示例

示例1: m4u_v2p_new

示例2: copy_pmd_range

示例3: partial_clear

示例4: shmedia_unmapioaddr

示例5: remove_mapping_pmd_range

示例6: unswap_pgd

示例7: unuse_pgd

示例8: my_follow_page

示例9: swap_out_pgd

示例10: get_long

示例11: filemap_sync_pmd_range

示例12: show_pte

示例13: pin_page_for_write

示例14: imm_get_physical

示例15: zap_pmd_range

示例16: iterate_pmd

示例17: rtR0MemObjLinuxFixPte

示例18: follow_page

示例19: get_phys_addr

示例20: pgd_offset

请发表评论

全部评论

上一篇：

下一篇：

Delphi7客户端调用WebService（天气预报）

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053