本文整理汇总了C++中perf_print_counter函数的典型用法代码示例。如果您正苦于以下问题:C++ perf_print_counter函数的具体用法?C++ perf_print_counter怎么用?C++ perf_print_counter使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了perf_print_counter函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: test_perf
static int
test_perf(int argc, char *argv[])
{
perf_counter_t cc, ec;
cc = perf_alloc(PC_COUNT, "test_count");
ec = perf_alloc(PC_ELAPSED, "test_elapsed");
if ((cc == NULL) || (ec == NULL)) {
printf("perf: counter alloc failed\n");
return 1;
}
perf_begin(ec);
perf_count(cc);
perf_count(cc);
perf_count(cc);
perf_count(cc);
printf("perf: expect count of 4\n");
perf_print_counter(cc);
perf_end(ec);
printf("perf: expect count of 1\n");
perf_print_counter(ec);
printf("perf: expect at least two counters\n");
perf_print_all(0);
perf_free(cc);
perf_free(ec);
return OK;
}
开发者ID:ericweiye,项目名称:Firmware,代码行数:31,代码来源:tests_main.c
示例2: perf_print_counter
void
CM8JL65::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
_reports->print_info("report queue");
}
开发者ID:AlexisTM,项目名称:Firmware,代码行数:7,代码来源:cm8jl65.cpp
示例3: printf
void
FXOS8700CQ::print_info()
{
printf("accel reads: %u\n", _accel_read);
printf("mag reads: %u\n", _mag_read);
perf_print_counter(_accel_sample_perf);
perf_print_counter(_mag_sample_perf);
perf_print_counter(_bad_registers);
perf_print_counter(_bad_values);
perf_print_counter(_accel_duplicates);
_accel_reports->print_info("accel reports");
_mag_reports->print_info("mag reports");
::printf("checked_next: %u\n", _checked_next);
for (uint8_t i = 0; i < FXOS8700C_NUM_CHECKED_REGISTERS; i++) {
uint8_t v = read_reg(_checked_registers[i]);
if (v != _checked_values[i]) {
::printf("reg %02x:%02x should be %02x\n",
(unsigned)_checked_registers[i],
(unsigned)v,
(unsigned)_checked_values[i]);
}
}
::printf("temperature: %.2f\n", (double)_last_temperature);
}
开发者ID:bo-rc,项目名称:Firmware,代码行数:27,代码来源:fxos8700cq.cpp
示例4: perf_print_counter
void
Gimbal::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
}
开发者ID:anton-matosov,项目名称:PX4Firmware,代码行数:7,代码来源:gimbal.cpp
示例5: switch
int
PX4IO_serial::ioctl(unsigned operation, unsigned &arg)
{
switch (operation) {
case 1: /* XXX magic number - test operation */
switch (arg) {
case 0:
lowsyslog("test 0\n");
/* kill DMA, this is a PIO test */
stm32_dmastop(_tx_dma);
stm32_dmastop(_rx_dma);
rCR3 &= ~(USART_CR3_DMAR | USART_CR3_DMAT);
for (;;) {
while (!(rSR & USART_SR_TXE))
;
rDR = 0x55;
}
return 0;
case 1:
{
unsigned fails = 0;
for (unsigned count = 0;; count++) {
uint16_t value = count & 0xffff;
if (write((PX4IO_PAGE_TEST << 8) | PX4IO_P_TEST_LED, &value, 1) != 0)
fails++;
if (count >= 5000) {
lowsyslog("==== test 1 : %u failures ====\n", fails);
perf_print_counter(_pc_txns);
perf_print_counter(_pc_dmasetup);
perf_print_counter(_pc_retries);
perf_print_counter(_pc_timeouts);
perf_print_counter(_pc_crcerrs);
perf_print_counter(_pc_dmaerrs);
perf_print_counter(_pc_protoerrs);
perf_print_counter(_pc_uerrs);
perf_print_counter(_pc_idle);
perf_print_counter(_pc_badidle);
count = 0;
}
}
return 0;
}
case 2:
lowsyslog("test 2\n");
return 0;
}
default:
break;
}
return -1;
}
开发者ID:SkyHawkDP,项目名称:PX4Firmware,代码行数:59,代码来源:px4io_serial.cpp
示例6: perf_print_counter
void
Airspeed::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
warnx("poll interval: %u ticks", _measure_ticks);
_reports->print_info("report queue");
}
开发者ID:ChristophTobler,项目名称:Firmware,代码行数:8,代码来源:airspeed.cpp
示例7: perf_print_counter
void
SF1XX::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
printf("poll interval: %u ticks\n", _measure_ticks);
_reports->print_info("report queue");
}
开发者ID:syantek,项目名称:Firmware,代码行数:8,代码来源:sf1xx.cpp
示例8: perf_print_counter
void LidarLitePWM::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_read_errors);
perf_print_counter(_sensor_zero_resets);
warnx("poll interval: %u ticks", getMeasureTicks());
warnx("distance: %.3fm", (double)_range.current_distance);
}
开发者ID:Aerovinci,项目名称:Firmware,代码行数:8,代码来源:LidarLitePWM.cpp
示例9: perf_print_counter
void
AirspeedSim::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
PX4_INFO("poll interval: %u ticks", _measure_ticks);
_reports->print_info("report queue");
}
开发者ID:JW-CHOI,项目名称:Firmware,代码行数:9,代码来源:airspeedsim.cpp
示例10: printf
void
L3GD20::print_info()
{
printf("gyro reads: %u\n", _read);
perf_print_counter(_sample_perf);
perf_print_counter(_reschedules);
perf_print_counter(_errors);
_reports->print_info("report queue");
}
开发者ID:363546178,项目名称:PX4_STM32F4DISCOVERY,代码行数:9,代码来源:l3gd20.cpp
示例11: perf_print_counter
void
QMC5883::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
printf("poll interval: %u ticks\n", _measure_ticks);
print_message(_last_report);
_reports->print_info("report queue");
}
开发者ID:AlexisTM,项目名称:Firmware,代码行数:9,代码来源:qmc5883.cpp
示例12: perf_print_counter
void
LIS3MDL::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
PX4_INFO("poll interval: %u ticks", _measure_ticks);
print_message(_last_report);
_reports->print_info("report queue");
}
开发者ID:LiYuanxing,项目名称:Firmware,代码行数:9,代码来源:lis3mdl.cpp
示例13: perf_print_counter
void
HMC5883::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
printf("poll interval: %u ticks\n", _measure_ticks);
_reports->print_info("report queue");
}
开发者ID:akistanov,项目名称:Firmware,代码行数:9,代码来源:hmc5883.cpp
示例14: printf
void
TFMINI::print_info()
{
printf("Using port '%s'\n", _port);
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
printf("poll interval: %d ticks\n", _measure_ticks);
_reports->print_info("report queue");
}
开发者ID:ayu135,项目名称:Firmware,代码行数:9,代码来源:tfmini.cpp
示例15: perf_print_counter
void
LM73::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
printf("poll interval: %u ticks\n", _measure_ticks);
_reports->print_info("report queue");
printf("ambient temperature: %10.4f\n", (double)(temperature));
}
开发者ID:AdyashaDash,项目名称:fw_px4_sysidCL,代码行数:10,代码来源:lm73.cpp
示例16: perf_print_counter
void
ETSAirspeed::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
printf("poll interval: %u ticks\n", _measure_ticks);
printf("report queue: %u (%u/%u @ %p)\n",
_num_reports, _oldest_report, _next_report, _reports);
}
开发者ID:omija1,项目名称:PX4Firmware,代码行数:10,代码来源:ets_airspeed.cpp
示例17: perf_print_counter
void
LSM303D::print_info()
{
perf_print_counter(_accel_sample_perf);
printf("report queue: %u (%u/%u @ %p)\n",
_num_accel_reports, _oldest_accel_report, _next_accel_report, _accel_reports);
perf_print_counter(_mag_sample_perf);
printf("report queue: %u (%u/%u @ %p)\n",
_num_mag_reports, _oldest_mag_report, _next_mag_report, _mag_reports);
}
开发者ID:trungkiena6,项目名称:mavstation-daughterboard,代码行数:10,代码来源:lsm303d.cpp
示例18: perf_print_counter
void LidarLiteI2C::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_sensor_resets);
perf_print_counter(_sensor_zero_resets);
printf("poll interval: %u ticks\n", getMeasureTicks());
_reports->print_info("report queue");
printf("distance: %ucm (0x%04x)\n",
(unsigned)_last_distance, (unsigned)_last_distance);
}
开发者ID:imcnanie,项目名称:Firmware,代码行数:11,代码来源:LidarLiteI2C.cpp
示例19: perf_print_counter
void
AK8975::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
printf("poll interval: %u ticks\n", _measure_ticks);
_reports->print_info("report queue");
printf("sensitivity ASAX %02X\n", _fuse[0]);
printf("sensitivity ASAY %02X\n", _fuse[1]);
printf("sensitivity ASAZ %02X\n", _fuse[2]);
}
开发者ID:smithandrewc,项目名称:Firmware,代码行数:12,代码来源:ak8975.cpp
示例20: perf_print_counter
void
LL40LS::print_info()
{
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
perf_print_counter(_sensor_resets);
perf_print_counter(_sensor_zero_resets);
printf("poll interval: %u ticks\n", _measure_ticks);
_reports->print_info("report queue");
printf("distance: %ucm (0x%04x)\n",
(unsigned)_last_distance, (unsigned)_last_distance);
}
开发者ID:kevin03,项目名称:Firmware,代码行数:13,代码来源:ll40ls.cpp
注:本文中的perf_print_counter函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论