• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ perf_free函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中perf_free函数的典型用法代码示例。如果您正苦于以下问题：C++ perf_free函数的具体用法？C++ perf_free怎么用？C++ perf_free使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了perf_free函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: stop

PMW3901::~PMW3901()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
}
开发者ID:CookLabs，项目名称:Firmware，代码行数:14，代码来源:pmw3901.cpp


示例2: stop

HMC5883::~HMC5883()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr)
		delete[] _reports;

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_buffer_overflows);
}
开发者ID:avnishks，项目名称:px4，代码行数:14，代码来源:hmc5883.cpp


示例3: stop

PX4FLOW::~PX4FLOW()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_buffer_overflows);
}
开发者ID:13920381732，项目名称:Firmware，代码行数:14，代码来源:px4flow.cpp


示例4: stop

BMI160::~BMI160()
{
	/* make sure we are truly inactive */
	stop();

	/* delete the gyro subdriver */
	delete _gyro;

	/* free any existing reports */
	if (_accel_reports != nullptr) {
		delete _accel_reports;
	}

	if (_gyro_reports != nullptr) {
		delete _gyro_reports;
	}

	if (_accel_class_instance != -1) {
		unregister_class_devname(ACCEL_BASE_DEVICE_PATH, _accel_class_instance);
	}

	/* delete the perf counter */
	perf_free(_sample_perf);
	perf_free(_accel_reads);
	perf_free(_gyro_reads);
	perf_free(_bad_transfers);
	perf_free(_bad_registers);
	perf_free(_good_transfers);
	perf_free(_reset_retries);
	perf_free(_duplicates);
}
开发者ID:SJW623，项目名称:Firmware，代码行数:31，代码来源:bmi160.cpp


示例5: fw_server

UavcanNode::~UavcanNode()
{

	fw_server(Stop);

	if (_task != -1) {

		/* tell the task we want it to go away */
		_task_should_exit = true;

		unsigned i = 10;

		do {
			/* wait 5ms - it should wake every 10ms or so worst-case */
			usleep(5000);

			/* if we have given up, kill it */
			if (--i == 0) {
				task_delete(_task);
				break;
			}

		} while (_task != -1);
	}

	/* clean up the alternate device node */
	// unregister_driver(PWM_OUTPUT_DEVICE_PATH);

	::close(_armed_sub);

	// Removing the sensor bridges
	auto br = _sensor_bridges.getHead();

	while (br != nullptr) {
		auto next = br->getSibling();
		delete br;
		br = next;
	}

	_instance = nullptr;

	perf_free(_perfcnt_node_spin_elapsed);
	perf_free(_perfcnt_esc_mixer_output_elapsed);
	perf_free(_perfcnt_esc_mixer_total_elapsed);
	pthread_mutex_destroy(&_node_mutex);
	sem_destroy(&_server_command_sem);

}
开发者ID:JW-CHOI，项目名称:Firmware，代码行数:48，代码来源:uavcan_main.cpp


示例6: stop

HMC5883::~HMC5883()
{
	/* make sure we are truly inactive */
	stop();

	if (_reports != nullptr)
		delete _reports;

	if (_class_instance != -1)
		unregister_class_devname(MAG_DEVICE_PATH, _class_instance);

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_buffer_overflows);
}
开发者ID:9510030662，项目名称:Firmware，代码行数:16，代码来源:hmc5883.cpp


示例7: unregister_class_devname

MPU9250_mag::~MPU9250_mag()
{
	if (_mag_class_instance != -1) {
		unregister_class_devname(MAG_BASE_DEVICE_PATH, _mag_class_instance);
	}

	if (_mag_reports != nullptr) {
		delete _mag_reports;
	}

	perf_free(_mag_reads);
	perf_free(_mag_errors);
	perf_free(_mag_overruns);
	perf_free(_mag_overflows);
	perf_free(_mag_duplicates);
}
开发者ID:2013-8-15，项目名称:Firmware，代码行数:16，代码来源:mag.cpp


示例8: stop

SF0X::~SF0X()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	if (_class_instance != -1) {
		unregister_class_devname(RANGE_FINDER_BASE_DEVICE_PATH, _class_instance);
	}

	perf_free(_sample_perf);
	perf_free(_comms_errors);
}
开发者ID:AlexanderAurora，项目名称:Firmware，代码行数:17，代码来源:sf0x.cpp


示例9: stop

LidarLitePWM::~LidarLitePWM()
{
	stop();

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	if (_class_instance != -1) {
		unregister_class_devname(RANGE_FINDER_BASE_DEVICE_PATH, _class_instance);
	}

	/* free perf counters */
	perf_free(_sample_perf);
	perf_free(_sensor_zero_resets);
}
开发者ID:Aerovinci，项目名称:Firmware，代码行数:17，代码来源:LidarLitePWM.cpp


示例10: stop

L3GD20::~L3GD20()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr)
		delete _reports;

	if (_class_instance != -1)
		unregister_class_devname(GYRO_DEVICE_PATH, _class_instance);

	/* delete the perf counter */
	perf_free(_sample_perf);
	perf_free(_reschedules);
	perf_free(_errors);
}
开发者ID:363546178，项目名称:PX4_STM32F4DISCOVERY，代码行数:17，代码来源:l3gd20.cpp


示例11: stop

LSM303D::~LSM303D()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_accel_reports != nullptr)
		delete _accel_reports;
	if (_mag_reports != nullptr)
		delete _mag_reports;

	delete _mag;

	/* delete the perf counter */
	perf_free(_accel_sample_perf);
	perf_free(_mag_sample_perf);
}
开发者ID:Userskii，项目名称:Firmware，代码行数:17，代码来源:lsm303d.cpp


示例12: stop

Airspeed::~Airspeed()
{
	/* make sure we are truly inactive */
	stop();

	if (_class_instance != -1)
		unregister_class_devname(AIRSPEED_DEVICE_PATH, _class_instance);

	/* free any existing reports */
	if (_reports != nullptr)
		delete _reports;

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_buffer_overflows);
}
开发者ID:kbrtny，项目名称:PX4Firmware，代码行数:17，代码来源:airspeed.cpp


示例13: stop

AirspeedSim::~AirspeedSim()
{
	/* make sure we are truly inactive */
	stop();

	if (_class_instance != -1) {
		unregister_class_devname(AIRSPEED_BASE_DEVICE_PATH, _class_instance);
	}

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
}
开发者ID:wingtra，项目名称:Firmware，代码行数:18，代码来源:airspeedsim.cpp


示例14: stm32_dmastop

PX4IO_serial::~PX4IO_serial()
{
	if (_tx_dma != nullptr) {
		stm32_dmastop(_tx_dma);
		stm32_dmafree(_tx_dma);
	}

	if (_rx_dma != nullptr) {
		stm32_dmastop(_rx_dma);
		stm32_dmafree(_rx_dma);
	}

	/* reset the UART */
	rCR1 = 0;
	rCR2 = 0;
	rCR3 = 0;

	/* detach our interrupt handler */
	up_disable_irq(PX4IO_SERIAL_VECTOR);
	irq_detach(PX4IO_SERIAL_VECTOR);

	/* restore the GPIOs */
	stm32_unconfiggpio(PX4IO_SERIAL_TX_GPIO);
	stm32_unconfiggpio(PX4IO_SERIAL_RX_GPIO);

	/* and kill our semaphores */
	sem_destroy(&_completion_semaphore);
	sem_destroy(&_bus_semaphore);

	perf_free(_pc_txns);
	perf_free(_pc_dmasetup);
	perf_free(_pc_retries);
	perf_free(_pc_timeouts);
	perf_free(_pc_crcerrs);
	perf_free(_pc_dmaerrs);
	perf_free(_pc_protoerrs);
	perf_free(_pc_uerrs);
	perf_free(_pc_idle);
	perf_free(_pc_badidle);

	if (g_interface == this) {
		g_interface = nullptr;
	}
}
开发者ID:JW-CHOI，项目名称:Firmware，代码行数:44，代码来源:px4io_serial.cpp


示例15: logbuffer_free

void logbuffer_free(struct logbuffer_s *lb)
{
	if (lb->data) {
		free(lb->data);
		lb->write_ptr = 0;
		lb->read_ptr = 0;
		lb->data = NULL;
		perf_free(lb->perf_dropped);
	}
}
开发者ID:13920381732，项目名称:Firmware，代码行数:10，代码来源:logbuffer.c


示例16: stop

MB12XX::~MB12XX()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	if (_class_instance != -1) {
		unregister_class_devname(RANGE_FINDER_DEVICE_PATH, _class_instance);
	}

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_buffer_overflows);
}
开发者ID:2014matthew，项目名称:PX4Firmware，代码行数:19，代码来源:mb12xx.cpp


示例17: stop

QMC5883::~QMC5883()
{
	/* make sure we are truly inactive */
	stop();

	if (_reports != nullptr) {
		delete _reports;
	}

	if (_class_instance != -1) {
		unregister_class_devname(MAG_BASE_DEVICE_PATH, _class_instance);
	}

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_range_errors);
	perf_free(_conf_errors);
}
开发者ID:AlexisTM，项目名称:Firmware，代码行数:19，代码来源:qmc5883.cpp


示例18: stop

LidarLiteI2C::~LidarLiteI2C()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	if (_class_instance != -1) {
		unregister_class_devname(RANGE_FINDER_BASE_DEVICE_PATH, _class_instance);
	}

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_sensor_resets);
	perf_free(_sensor_zero_resets);
}
开发者ID:imcnanie，项目名称:Firmware，代码行数:20，代码来源:LidarLiteI2C.cpp


示例19: stop

LPS25H::~LPS25H()
{
	/* make sure we are truly inactive */
	stop();

	if (_class_instance != -1) {
		unregister_class_devname(BARO_BASE_DEVICE_PATH, _class_instance);
	}

	if (_reports != nullptr) {
		delete _reports;
	}

	// free perf counters
	perf_free(_sample_perf);
	perf_free(_comms_errors);
	perf_free(_buffer_overflows);

	delete _interface;
}
开发者ID:andre-nguyen，项目名称:Firmware，代码行数:20，代码来源:lps25h.cpp


示例20: stop

FXAS21002C::~FXAS21002C()
{
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr) {
		delete _reports;
	}

	if (_class_instance != -1) {
		unregister_class_devname(GYRO_BASE_DEVICE_PATH, _class_instance);
	}


	/* delete the perf counter */
	perf_free(_sample_perf);
	perf_free(_errors);
	perf_free(_bad_registers);
	perf_free(_duplicates);
}
开发者ID:airmind，项目名称:OpenMindPX，代码行数:21，代码来源:fxas21002c.cpp



注：本文中的perf_free函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ perf_pop函数代码示例发布时间：2022-05-30
下一篇：
C++ perf_event_open函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap