C++ percpu_counter_read_positive函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中percpu_counter_read_positive函数的典型用法代码示例。如果您正苦于以下问题：C++ percpu_counter_read_positive函数的具体用法？C++ percpu_counter_read_positive怎么用？C++ percpu_counter_read_positive使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了percpu_counter_read_positive函数的11个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ext4_has_free_blocks

/**
 * ext4_has_free_blocks()
 * @sbi:	in-core super block structure.
 * @nblocks:	number of needed blocks
 *
 * Check if filesystem has nblocks free & available for allocation.
 * On success return 1, return 0 on failure.
 */
static int ext4_has_free_blocks(struct ext4_sb_info *sbi,
				s64 nblocks, unsigned int flags)
{
	s64 free_blocks, dirty_blocks, root_blocks;
	struct percpu_counter *fbc = &sbi->s_freeblocks_counter;
	struct percpu_counter *dbc = &sbi->s_dirtyblocks_counter;

	free_blocks  = percpu_counter_read_positive(fbc);
	dirty_blocks = percpu_counter_read_positive(dbc);
	root_blocks = ext4_r_blocks_count(sbi->s_es);

	if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
						EXT4_FREEBLOCKS_WATERMARK) {
		free_blocks  = percpu_counter_sum_positive(fbc);
		dirty_blocks = percpu_counter_sum_positive(dbc);
		if (dirty_blocks < 0) {
			printk(KERN_CRIT "Dirty block accounting "
					"went wrong %lld\n",
					(long long)dirty_blocks);
		}
	}
	/* Check whether we have space after
	 * accounting for current dirty blocks & root reserved blocks.
	 */
	if (free_blocks >= ((root_blocks + nblocks) + dirty_blocks))
		return 1;

	/* Hm, nope.  Are (enough) root reserved blocks available? */
	if (sbi->s_resuid == current_fsuid() ||
	    ((sbi->s_resgid != 0) && in_group_p(sbi->s_resgid)) ||
	    capable(CAP_SYS_RESOURCE) ||
		(flags & EXT4_MB_USE_ROOT_BLOCKS)) {

		if (free_blocks >= (nblocks + dirty_blocks))
			return 1;
	}

	return 0;
}

开发者ID:daveti，项目名称:prov-kernel，代码行数:47，代码来源:balloc.c

示例2: __vm_enough_memory

int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
{
	unsigned long free, allowed;

	vm_acct_memory(pages);

	if (sysctl_overcommit_memory == OVERCOMMIT_ALWAYS)
		return 0;

	if (sysctl_overcommit_memory == OVERCOMMIT_GUESS) {
		free = global_page_state(NR_FREE_PAGES);
		free += global_page_state(NR_FILE_PAGES);

		free -= global_page_state(NR_SHMEM);

		free += get_nr_swap_pages();

		free += global_page_state(NR_SLAB_RECLAIMABLE);

		if (free <= totalreserve_pages)
			goto error;
		else
			free -= totalreserve_pages;

		if (!cap_sys_admin)
			free -= free / 32;

		if (free > pages)
			return 0;

		goto error;
	}

	allowed = (totalram_pages - hugetlb_total_pages())
	       	* sysctl_overcommit_ratio / 100;
	if (!cap_sys_admin)
		allowed -= allowed / 32;
	allowed += total_swap_pages;

	if (mm)
		allowed -= mm->total_vm / 32;

	if (percpu_counter_read_positive(&vm_committed_as) < allowed)
		return 0;
error:
	vm_unacct_memory(pages);

	return -ENOMEM;
}

开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:49，代码来源:mmap.c

示例3: meminfo_proc_show

static int meminfo_proc_show(struct seq_file *m, void *v)
{
	struct sysinfo i;
	unsigned long committed;
	unsigned long allowed;
	struct vmalloc_info vmi;
	long cached;
	unsigned long pages[NR_LRU_LISTS];
	int lru;

/*
 * display in kilobytes.
 */
#define K(x) ((x) << (PAGE_SHIFT - 10))
	si_meminfo(&i);
	si_swapinfo(&i);
	committed = percpu_counter_read_positive(&vm_committed_as);
	allowed = ((totalram_pages - hugetlb_total_pages())
		* sysctl_overcommit_ratio / 100) + total_swap_pages;

	cached = global_page_state(NR_FILE_PAGES) -
			total_swapcache_pages - i.bufferram;
	if (cached < 0)
		cached = 0;

	get_vmalloc_info(&vmi);

	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
		pages[lru] = global_page_state(NR_LRU_BASE + lru);

	/*
	 * Tagged format, for easy grepping and expansion.
	 */
	seq_printf(m,
		"MemTotal:       %8lu kB\n"
		"MemFree:        %8lu kB\n"
		"Buffers:        %8lu kB\n"
		"Cached:         %8lu kB\n"
		"SwapCached:     %8lu kB\n"
		"Active:         %8lu kB\n"
		"Inactive:       %8lu kB\n"
		"Active(anon):   %8lu kB\n"
		"Inactive(anon): %8lu kB\n"
		"Active(file):   %8lu kB\n"
		"Inactive(file): %8lu kB\n"
		"Unevictable:    %8lu kB\n"
		"Mlocked:        %8lu kB\n"
#ifdef CONFIG_HIGHMEM
		"HighTotal:      %8lu kB\n"
		"HighFree:       %8lu kB\n"
		"LowTotal:       %8lu kB\n"
		"LowFree:        %8lu kB\n"
#endif
#ifndef CONFIG_MMU
		"MmapCopy:       %8lu kB\n"
#endif
		"SwapTotal:      %8lu kB\n"
		"SwapFree:       %8lu kB\n"
		"Dirty:          %8lu kB\n"
		"Writeback:      %8lu kB\n"
		"AnonPages:      %8lu kB\n"
		"Mapped:         %8lu kB\n"
		"Shmem:          %8lu kB\n"
		"Slab:           %8lu kB\n"
		"SReclaimable:   %8lu kB\n"
		"SUnreclaim:     %8lu kB\n"
		"KernelStack:    %8lu kB\n"
		"PageTables:     %8lu kB\n"
#ifdef CONFIG_QUICKLIST
		"Quicklists:     %8lu kB\n"
#endif
		"NFS_Unstable:   %8lu kB\n"
		"Bounce:         %8lu kB\n"
		"WritebackTmp:   %8lu kB\n"
		"CommitLimit:    %8lu kB\n"
		"Committed_AS:   %8lu kB\n"
		"VmallocTotal:   %8lu kB\n"
		"VmallocUsed:    %8lu kB\n"
		"VmallocChunk:   %8lu kB\n"
#ifdef CONFIG_MEMORY_FAILURE
		"HardwareCorrupted: %5lu kB\n"
#endif
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
		"AnonHugePages:  %8lu kB\n"
#endif
		,
		((K(i.totalram) < 524288)&&(K(i.totalram) > 262144)) ? 524288 : K(i.totalram),
		K(i.freeram),
		K(i.bufferram),
		K(cached),
		K(total_swapcache_pages),
		K(pages[LRU_ACTIVE_ANON]   + pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE]),
		K(pages[LRU_ACTIVE_ANON]),
		K(pages[LRU_INACTIVE_ANON]),
		K(pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_FILE]),
		K(pages[LRU_UNEVICTABLE]),
		K(global_page_state(NR_MLOCK)),
#ifdef CONFIG_HIGHMEM
//.........这里部分代码省略.........

开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:101，代码来源:meminfo.c

示例4: find_group_orlov

static int find_group_orlov(struct super_block *sb, struct inode *parent)
{
	int parent_group = EXT3_I(parent)->i_block_group;
	struct ext3_sb_info *sbi = EXT3_SB(sb);
	struct ext3_super_block *es = sbi->s_es;
	int ngroups = sbi->s_groups_count;
	int inodes_per_group = EXT3_INODES_PER_GROUP(sb);
	int freei, avefreei;
	int freeb, avefreeb;
	int blocks_per_dir, ndirs;
	int max_debt, max_dirs, min_blocks, min_inodes;
	int group = -1, i;
	struct ext3_group_desc *desc;
	struct buffer_head *bh;

	freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter);
	avefreei = freei / ngroups;
	freeb = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
	avefreeb = freeb / ngroups;
	ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter);

	if ((parent == sb->s_root->d_inode) ||
	    (EXT3_I(parent)->i_flags & EXT3_TOPDIR_FL)) {
		int best_ndir = inodes_per_group;
		int best_group = -1;

		get_random_bytes(&group, sizeof(group));
		parent_group = (unsigned)group % ngroups;
		for (i = 0; i < ngroups; i++) {
			group = (parent_group + i) % ngroups;
			desc = ext3_get_group_desc (sb, group, &bh);
			if (!desc || !desc->bg_free_inodes_count)
				continue;
			if (le16_to_cpu(desc->bg_used_dirs_count) >= best_ndir)
				continue;
			if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
				continue;
			if (le16_to_cpu(desc->bg_free_blocks_count) < avefreeb)
				continue;
			best_group = group;
			best_ndir = le16_to_cpu(desc->bg_used_dirs_count);
		}
		if (best_group >= 0)
			return best_group;
		goto fallback;
	}

	blocks_per_dir = (le32_to_cpu(es->s_blocks_count) - freeb) / ndirs;

	max_dirs = ndirs / ngroups + inodes_per_group / 16;
	min_inodes = avefreei - inodes_per_group / 4;
	min_blocks = avefreeb - EXT3_BLOCKS_PER_GROUP(sb) / 4;

	max_debt = EXT3_BLOCKS_PER_GROUP(sb) / max(blocks_per_dir, BLOCK_COST);
	if (max_debt * INODE_COST > inodes_per_group)
		max_debt = inodes_per_group / INODE_COST;
	if (max_debt > 255)
		max_debt = 255;
	if (max_debt == 0)
		max_debt = 1;

	for (i = 0; i < ngroups; i++) {
		group = (parent_group + i) % ngroups;
		desc = ext3_get_group_desc (sb, group, &bh);
		if (!desc || !desc->bg_free_inodes_count)
			continue;
		if (le16_to_cpu(desc->bg_used_dirs_count) >= max_dirs)
			continue;
		if (le16_to_cpu(desc->bg_free_inodes_count) < min_inodes)
			continue;
		if (le16_to_cpu(desc->bg_free_blocks_count) < min_blocks)
			continue;
		return group;
	}

fallback:
	for (i = 0; i < ngroups; i++) {
		group = (parent_group + i) % ngroups;
		desc = ext3_get_group_desc (sb, group, &bh);
		if (!desc || !desc->bg_free_inodes_count)
			continue;
		if (le16_to_cpu(desc->bg_free_inodes_count) >= avefreei)
			return group;
	}

	if (avefreei) {
		/*
		 * The free-inodes counter is approximate, and for really small
		 * filesystems the above test can fail to find any blockgroups
		 */
		avefreei = 0;
		goto fallback;
	}

	return -1;
}

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:96，代码来源:ialloc.c

示例5: get_nr_files

/*
 * Return the total number of open files in the system
 */
static long get_nr_files(void)
{
	return percpu_counter_read_positive(&nr_files);
}

开发者ID:frank-liu，项目名称:multichannel，代码行数:7，代码来源:file_table.c

示例6: kdb_meminfo_proc_show

/* Like meminfo_proc_show() but without the locks and using kdb_printf() */
void
kdb_meminfo_proc_show(void)
{
	struct sysinfo i;
	unsigned long committed;
	unsigned long allowed;
	struct vmalloc_info vmi;
	long cached;
	unsigned long pages[NR_LRU_LISTS];
	int lru;

/*
 * display in kilobytes.
 */
#define K(x) ((x) << (PAGE_SHIFT - 10))
	si_meminfo(&i);
	_si_swapinfo(&i);
	committed = percpu_counter_read_positive(&vm_committed_as);
	allowed = ((totalram_pages - hugetlb_total_pages())
		* sysctl_overcommit_ratio / 100) + total_swap_pages;

	cached = global_page_state(NR_FILE_PAGES) -
			total_swapcache_pages - i.bufferram;
	if (cached < 0)
		cached = 0;

	get_vmalloc_info(&vmi);

	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
		pages[lru] = global_page_state(NR_LRU_BASE + lru);

	kdb_printf(
		"MemTotal:       %8lu kB\n"
		"MemFree:        %8lu kB\n"
		"Buffers:        %8lu kB\n",
		K(i.totalram),
		K(i.freeram),
		K(i.bufferram)
		);
	kdb_printf(
		"Cached:         %8lu kB\n"
		"SwapCached:     %8lu kB\n"
		"Active:         %8lu kB\n"
		"Inactive:       %8lu kB\n",
		K(cached),
		K(total_swapcache_pages),
		K(pages[LRU_ACTIVE_ANON]   + pages[LRU_ACTIVE_FILE]),
                K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE])
		);
	kdb_printf(
		"Active(anon):   %8lu kB\n"
		"Inactive(anon): %8lu kB\n"
		"Active(file):   %8lu kB\n"
		"Inactive(file): %8lu kB\n",
		K(pages[LRU_ACTIVE_ANON]),
		K(pages[LRU_INACTIVE_ANON]),
		K(pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_FILE])
		);
#ifdef CONFIG_UNEVICTABLE_LRU
	kdb_printf(
		"Unevictable:    %8lu kB\n"
		"Mlocked:        %8lu kB\n",
		K(pages[LRU_UNEVICTABLE]),
		K(global_page_state(NR_MLOCK))
		);
#endif
#ifdef CONFIG_HIGHMEM
	kdb_printf(
		"HighTotal:      %8lu kB\n"
		"HighFree:       %8lu kB\n"
		"LowTotal:       %8lu kB\n"
		"LowFree:        %8lu kB\n",
		K(i.totalhigh),
		K(i.freehigh),
		K(i.totalram-i.totalhigh),
		K(i.freeram-i.freehigh)
		);
#endif
	kdb_printf(
		"SwapTotal:      %8lu kB\n"
		"SwapFree:       %8lu kB\n"
		"Dirty:          %8lu kB\n",
		K(i.totalswap),
		K(i.freeswap),
		K(global_page_state(NR_FILE_DIRTY))
		);
	kdb_printf(
		"Writeback:      %8lu kB\n"
		"AnonPages:      %8lu kB\n"
		"Mapped:         %8lu kB\n",
		K(global_page_state(NR_WRITEBACK)),
		K(global_page_state(NR_ANON_PAGES)),
		K(global_page_state(NR_FILE_MAPPED))
		);
	kdb_printf(
		"Slab:           %8lu kB\n"
		"SReclaimable:   %8lu kB\n"
		"SUnreclaim:     %8lu kB\n",
//.........这里部分代码省略.........

开发者ID:mongmio，项目名称:ivyproject_thermal，代码行数:101，代码来源:meminfo.c

示例7: vm_memory_committed

/*
 * The global memory commitment made in the system can be a metric
 * that can be used to drive ballooning decisions when Linux is hosted
 * as a guest. On Hyper-V, the host implements a policy engine for dynamically
 * balancing memory across competing virtual machines that are hosted.
 * Several metrics drive this policy engine including the guest reported
 * memory commitment.
 */
unsigned long vm_memory_committed(void)
{
	return percpu_counter_read_positive(&vm_committed_as);
}

开发者ID:rochecr，项目名称:linux，代码行数:12，代码来源:nommu.c

示例8: meminfo_test_saved

void meminfo_test_saved(void)
{
	struct sysinfo i;
	unsigned long committed;
	unsigned long allowed;
	struct vmalloc_info vmi;
	long cached;
	unsigned long pages[NR_LRU_LISTS];
	int lru;

	printk("\nThe following trace is a meminfo test and not a bug!\n");

/*
 * display in kilobytes.
 */
#define K(x) ((x) << (PAGE_SHIFT - 10))
	si_meminfo(&i);
	si_swapinfo(&i);
/* OPPO 2010-11-18 Laijl Modify begin for msm platform */
#if 0
	committed = atomic_long_read(&vm_committed_space);
#else
	committed = percpu_counter_read_positive(&vm_committed_as);
#endif
/* OPPO 2010-11-18 Laijl Modify end */
	allowed = ((totalram_pages - hugetlb_total_pages())
		* sysctl_overcommit_ratio / 100) + total_swap_pages;

	cached = global_page_state(NR_FILE_PAGES) -
			total_swapcache_pages - i.bufferram;
	if (cached < 0)
		cached = 0;

	get_vmalloc_info(&vmi);

	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
		pages[lru] = global_page_state(NR_LRU_BASE + lru);

	/*
	 * Tagged format, for easy grepping and expansion.
	 */
	printk(
		"MemTotal:       %8lu kB\n"
		"MemFree:        %8lu kB\n"
		"Buffers:        %8lu kB\n"
		"Cached:         %8lu kB\n"
		"SwapCached:     %8lu kB\n"
		"Active:         %8lu kB\n"
		"Inactive:       %8lu kB\n"
		"Active(anon):   %8lu kB\n"
		"Inactive(anon): %8lu kB\n"
		"Active(file):   %8lu kB\n"
		"Inactive(file): %8lu kB\n"
		"Unevictable:    %8lu kB\n"
		"Mlocked:        %8lu kB\n"
#ifdef CONFIG_HIGHMEM
		"HighTotal:      %8lu kB\n"
		"HighFree:       %8lu kB\n"
		"LowTotal:       %8lu kB\n"
		"LowFree:        %8lu kB\n"
#endif
#ifndef CONFIG_MMU
		"MmapCopy:       %8lu kB\n"
#endif
		"SwapTotal:      %8lu kB\n"
		"SwapFree:       %8lu kB\n"
		"Dirty:          %8lu kB\n"
		"Writeback:      %8lu kB\n"
		"AnonPages:      %8lu kB\n"
		"Mapped:         %8lu kB\n"
		"Shmem:          %8lu kB\n"
		"Slab:           %8lu kB\n"
		"SReclaimable:   %8lu kB\n"
		"SUnreclaim:     %8lu kB\n"
		"KernelStack:    %8lu kB\n"
		"PageTables:     %8lu kB\n"
#ifdef CONFIG_QUICKLIST
		"Quicklists:     %8lu kB\n"
#endif
		"NFS_Unstable:   %8lu kB\n"
		"Bounce:         %8lu kB\n"
		"WritebackTmp:   %8lu kB\n"
		"CommitLimit:    %8lu kB\n"
		"Committed_AS:   %8lu kB\n"
		"VmallocTotal:   %8lu kB\n"
		"VmallocUsed:    %8lu kB\n"
		"VmallocChunk:   %8lu kB\n"
#ifdef CONFIG_MEMORY_FAILURE
		"HardwareCorrupted: %5lu kB\n"
#endif
		,
		K(i.totalram),
		K(i.freeram),
		K(i.bufferram),
		K(cached),
		K(total_swapcache_pages),
		K(pages[LRU_ACTIVE_ANON]   + pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE]),
		K(pages[LRU_ACTIVE_ANON]),
		K(pages[LRU_INACTIVE_ANON]),
//.........这里部分代码省略.........

开发者ID:omnirom-onyx，项目名称:mr_kernel_onyx，代码行数:101，代码来源:oem_trace.c

示例9: meminfo_proc_show

static int meminfo_proc_show(struct seq_file *m, void *v)
{
	struct sysinfo i;
	unsigned long committed;
	struct vmalloc_info vmi;
	long cached;
	long available;
	unsigned long pagecache;
	unsigned long wmark_low = 0;
	unsigned long pages[NR_LRU_LISTS];
	struct zone *zone;
	int lru;

/*
 * display in kilobytes.
 */
#define K(x) ((x) << (PAGE_SHIFT - 10))
	si_meminfo(&i);
	si_swapinfo(&i);
	committed = percpu_counter_read_positive(&vm_committed_as);

	cached = global_page_state(NR_FILE_PAGES) -
			total_swapcache_pages() - i.bufferram;
	if (cached < 0)
		cached = 0;

	get_vmalloc_info(&vmi);

	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
		pages[lru] = global_page_state(NR_LRU_BASE + lru);

	for_each_zone(zone)
		wmark_low += zone->watermark[WMARK_LOW];

	/*
	 * Estimate the amount of memory available for userspace allocations,
	 * without causing swapping.
	 *
	 * Free memory cannot be taken below the low watermark, before the
	 * system starts swapping.
	 */
	available = i.freeram - wmark_low;

	/*
	 * Not all the page cache can be freed, otherwise the system will
	 * start swapping. Assume at least half of the page cache, or the
	 * low watermark worth of cache, needs to stay.
	 */
	pagecache = pages[LRU_ACTIVE_FILE] + pages[LRU_INACTIVE_FILE];
	pagecache -= min(pagecache / 2, wmark_low);
	available += pagecache;

	/*
	 * Part of the reclaimable slab consists of items that are in use,
	 * and cannot be freed. Cap this estimate at the low watermark.
	 */
	available += global_page_state(NR_SLAB_RECLAIMABLE) -
		     min(global_page_state(NR_SLAB_RECLAIMABLE) / 2, wmark_low);

	if (available < 0)
		available = 0;

	/*
	 * Tagged format, for easy grepping and expansion.
	 */
	seq_printf(m,
		"MemTotal:       %8lu kB\n"
		"MemFree:        %8lu kB\n"
		"MemAvailable:   %8lu kB\n"
		"Buffers:        %8lu kB\n"
		"Cached:         %8lu kB\n"
		"SwapCached:     %8lu kB\n"
		"Active:         %8lu kB\n"
		"Inactive:       %8lu kB\n"
		"Active(anon):   %8lu kB\n"
		"Inactive(anon): %8lu kB\n"
		"Active(file):   %8lu kB\n"
		"Inactive(file): %8lu kB\n"
		"Unevictable:    %8lu kB\n"
		"Mlocked:        %8lu kB\n"
#ifdef CONFIG_HIGHMEM
		"HighTotal:      %8lu kB\n"
		"HighFree:       %8lu kB\n"
		"LowTotal:       %8lu kB\n"
		"LowFree:        %8lu kB\n"
#endif
#ifndef CONFIG_MMU
		"MmapCopy:       %8lu kB\n"
#endif
		"SwapTotal:      %8lu kB\n"
		"SwapFree:       %8lu kB\n"
		"Dirty:          %8lu kB\n"
		"Writeback:      %8lu kB\n"
		"AnonPages:      %8lu kB\n"
		"Mapped:         %8lu kB\n"
		"Shmem:          %8lu kB\n"
		"Slab:           %8lu kB\n"
		"SReclaimable:   %8lu kB\n"
		"SUnreclaim:     %8lu kB\n"
		"KernelStack:    %8lu kB\n"
//.........这里部分代码省略.........

开发者ID:383530895，项目名称:linux，代码行数:101，代码来源:meminfo.c

示例10: find_group_orlov

static int find_group_orlov(struct super_block *sb, struct inode *parent)
{
	int parent_group = EXT3_I(parent)->i_block_group;
	struct ext3_sb_info *sbi = EXT3_SB(sb);
	int ngroups = sbi->s_groups_count;
	int inodes_per_group = EXT3_INODES_PER_GROUP(sb);
	unsigned int freei, avefreei;
	ext3_fsblk_t freeb, avefreeb;
	unsigned int ndirs;
	int max_dirs, min_inodes;
	ext3_grpblk_t min_blocks;
	int group = -1, i;
	struct ext3_group_desc *desc;

	freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter);
	avefreei = freei / ngroups;
	freeb = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
	avefreeb = freeb / ngroups;
	ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter);

	if ((parent == sb->s_root->d_inode) ||
	    (EXT3_I(parent)->i_flags & EXT3_TOPDIR_FL)) {
		int best_ndir = inodes_per_group;
		int best_group = -1;

		group = prandom_u32();
		parent_group = (unsigned)group % ngroups;
		for (i = 0; i < ngroups; i++) {
			group = (parent_group + i) % ngroups;
			desc = ext3_get_group_desc (sb, group, NULL);
			if (!desc || !desc->bg_free_inodes_count)
				continue;
			if (le16_to_cpu(desc->bg_used_dirs_count) >= best_ndir)
				continue;
			if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
				continue;
			if (le16_to_cpu(desc->bg_free_blocks_count) < avefreeb)
				continue;
			best_group = group;
			best_ndir = le16_to_cpu(desc->bg_used_dirs_count);
		}
		if (best_group >= 0)
			return best_group;
		goto fallback;
	}

	max_dirs = ndirs / ngroups + inodes_per_group / 16;
	min_inodes = avefreei - inodes_per_group / 4;
	min_blocks = avefreeb - EXT3_BLOCKS_PER_GROUP(sb) / 4;

	for (i = 0; i < ngroups; i++) {
		group = (parent_group + i) % ngroups;
		desc = ext3_get_group_desc (sb, group, NULL);
		if (!desc || !desc->bg_free_inodes_count)
			continue;
		if (le16_to_cpu(desc->bg_used_dirs_count) >= max_dirs)
			continue;
		if (le16_to_cpu(desc->bg_free_inodes_count) < min_inodes)
			continue;
		if (le16_to_cpu(desc->bg_free_blocks_count) < min_blocks)
			continue;
		return group;
	}

fallback:
	for (i = 0; i < ngroups; i++) {
		group = (parent_group + i) % ngroups;
		desc = ext3_get_group_desc (sb, group, NULL);
		if (!desc || !desc->bg_free_inodes_count)
			continue;
		if (le16_to_cpu(desc->bg_free_inodes_count) >= avefreei)
			return group;
	}

	if (avefreei) {
		/*
		 * The free-inodes counter is approximate, and for really small
		 * filesystems the above test can fail to find any blockgroups
		 */
		avefreei = 0;
		goto fallback;
	}

	return -1;
}

开发者ID:383530895，项目名称:linux，代码行数:85，代码来源:ialloc.c

示例11: extra_log_meminfo_lite

/// M: LCA @{
int extra_log_meminfo_lite(void)
{
#ifdef CONFIG_ZRAM
	struct sysinfo i;
	unsigned long committed;
	struct vmalloc_info vmi;
	long cached;
	unsigned long pages[NR_LRU_LISTS];
	int lru;

/*
 * display in kilobytes.
 */
#define K(x) ((x) << (PAGE_SHIFT - 10))
	si_meminfo(&i);
	si_swapinfo(&i);
	committed = percpu_counter_read_positive(&vm_committed_as);
	cached = global_page_state(NR_FILE_PAGES) -
			total_swapcache_pages - i.bufferram;
	if (cached < 0)
		cached = 0;

	get_vmalloc_info(&vmi);

	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
		pages[lru] = global_page_state(NR_LRU_BASE + lru);

	/*
	 * Tagged format, for easy grepping and expansion.
	 */
	printk(KERN_INFO "[MTK_MSR]meminfo"\
		"(%lu)"			// (MemFree)
		"(%lu"			// (Buffers, Cache, SwapCached)
		",%lu"
		",%lu)"
		"(%lu"			// (Active, Inactive, Unevictable, MLocked)
		",%lu"
		",%lu"
		",%lu"
		",%lu"
		",%lu"
		",%lu"
		",%lu)"
		"(%lu"			// (Swap total, Swap Free)
		",%lu)"
		"(%lu"			// (Anon, Mapped)
		",%lu)"
		"(%lu"			// (Slab KStack, PageTable)
		",%lu"
		",%lu)\n"
		,
		K(i.freeram),
		K(i.bufferram),
		K(cached),
		K(total_swapcache_pages),
		K(pages[LRU_ACTIVE_ANON]   + pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE]),
		K(pages[LRU_ACTIVE_ANON]),
		K(pages[LRU_INACTIVE_ANON]),
		K(pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_FILE]),
		K(pages[LRU_UNEVICTABLE]),
		K(global_page_state(NR_MLOCK)),
		K(i.totalswap),
		K(i.freeswap),
		K(global_page_state(NR_ANON_PAGES)),
		K(global_page_state(NR_FILE_MAPPED)),
		K(global_page_state(NR_SLAB_RECLAIMABLE) + global_page_state(NR_SLAB_UNRECLAIMABLE)),
		global_page_state(NR_KERNEL_STACK) * THREAD_SIZE >> 10,
		K(global_page_state(NR_PAGETABLE))
		);
#undef K
#endif	/* CONFIG_ZRAM */
	return 0;
}

开发者ID:SteveHuang27，项目名称:android_kernel_allview_p5_quad，代码行数:76，代码来源:meminfo.c

注：本文中的percpu_counter_read_positive函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ perfTimer函数代码示例发布时间：2022-05-30

C++ percent_expand函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19221|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ percpu_counter_read_positive函数代码示例

示例1: ext4_has_free_blocks

示例2: __vm_enough_memory

示例3: meminfo_proc_show

示例4: find_group_orlov

示例5: get_nr_files

示例6: kdb_meminfo_proc_show

示例7: vm_memory_committed

示例8: meminfo_test_saved

示例9: meminfo_proc_show

示例10: find_group_orlov

示例11: extra_log_meminfo_lite

请发表评论

全部评论

上一篇：

下一篇：

Delphi7客户端调用WebService（天气预报）

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053