C++ pending_request_free函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pending_request_free函数的典型用法代码示例。如果您正苦于以下问题：C++ pending_request_free函数的具体用法？C++ pending_request_free怎么用？C++ pending_request_free使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pending_request_free函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: sink_free

static void sink_free(struct audio_device *dev)
{
	struct sink *sink = dev->sink;

	if (sink->cb_id)
		avdtp_stream_remove_cb(sink->session, sink->stream,
					sink->cb_id);

	if (sink->dc_id)
		device_remove_disconnect_watch(dev->btd_dev, sink->dc_id);

	if (sink->session)
		avdtp_unref(sink->session);

	if (sink->connect)
		pending_request_free(dev, sink->connect);

	if (sink->disconnect)
		pending_request_free(dev, sink->disconnect);

	if (sink->retry_id)
		g_source_remove(sink->retry_id);

	g_free(sink);
	dev->sink = NULL;
}

开发者ID:LittoCats，项目名称:OT_4010D，代码行数:26，代码来源:sink.c

示例2: stream_setup_complete

static void stream_setup_complete(struct avdtp *session, struct a2dp_sep *sep,
					struct avdtp_stream *stream,
					struct avdtp_error *err, void *user_data)
{
	struct sink *sink = user_data;
	struct pending_request *pending;

	pending = sink->connect;

	if (stream) {
		DBusMessage *reply;
		sink->connect = NULL;
		reply = dbus_message_new_method_return(pending->msg);
		dbus_connection_send(pending->conn, reply, NULL);
		dbus_message_unref(reply);
		pending_request_free(pending);
		debug("Stream successfully created");
	} else {
		avdtp_unref(sink->session);
		sink->session = NULL;
		if (avdtp_error_type(err) == AVDTP_ERROR_ERRNO
				&& avdtp_error_posix_errno(err) != EHOSTDOWN) {
			debug("connect:connect XCASE detected");
			g_timeout_add(STREAM_SETUP_RETRY_TIMER,
					stream_setup_retry, sink);
		} else {
			sink->connect = NULL;
			error_failed(pending->conn, pending->msg, "Stream setup failed");
			pending_request_free(pending);
			debug("Stream setup failed : %s", avdtp_strerror(err));
		}
	}
}

开发者ID:Jeanlst，项目名称:Onlive-Source-Backup，代码行数:33，代码来源:sink.c

示例3: sink_shutdown

gboolean sink_shutdown(struct sink *sink)
{
	if (!sink->session)
		return FALSE;

	avdtp_set_device_disconnect(sink->session, TRUE);

	/* cancel pending connect */
	if (sink->connect) {
		struct pending_request *pending = sink->connect;

		if (pending->msg)
			error_failed(pending->conn, pending->msg,
							"Stream setup failed");
		pending_request_free(sink->dev, pending);
		sink->connect = NULL;

		avdtp_unref(sink->session);
		sink->session = NULL;

		return TRUE;
	}

	/* disconnect already ongoing */
	if (sink->disconnect)
		return TRUE;

	if (!sink->stream)
		return FALSE;

	if (avdtp_close(sink->session, sink->stream, FALSE) < 0)
		return FALSE;

	return TRUE;
}

开发者ID:doofus，项目名称:HP_7_18XX_Open_Source_20140206，代码行数:35，代码来源:sink.c

示例4: stream_state_changed

static void stream_state_changed(struct avdtp_stream *stream,
					avdtp_state_t old_state,
					avdtp_state_t new_state,
					struct avdtp_error *err,
					void *user_data)
{
	struct audio_device *dev = user_data;
	struct source *source = dev->source;

	if (err)
		return;

	switch (new_state) {
	case AVDTP_STATE_IDLE:
		if (source->disconnect) {
			DBusMessage *reply;
			struct pending_request *p;

			p = source->disconnect;
			source->disconnect = NULL;

			reply = dbus_message_new_method_return(p->msg);
			g_dbus_send_message(p->conn, reply);
			pending_request_free(dev, p);
		}

		if (source->dc_id) {
			device_remove_disconnect_watch(dev->btd_dev,
							source->dc_id);
			source->dc_id = 0;
		}

		if (source->session) {
			avdtp_unref(source->session);
			source->session = NULL;
		}
		source->stream = NULL;
		source->cb_id = 0;
		break;
	case AVDTP_STATE_OPEN:
		if (old_state == AVDTP_STATE_CONFIGURED &&
				source->state == SOURCE_STATE_CONNECTING) {
			source->dc_id = device_add_disconnect_watch(dev->btd_dev,
								disconnect_cb,
								dev, NULL);
		}
		source_set_state(dev, SOURCE_STATE_CONNECTED);
		break;
	case AVDTP_STATE_STREAMING:
		source_set_state(dev, SOURCE_STATE_PLAYING);
		break;
	case AVDTP_STATE_CONFIGURED:
	case AVDTP_STATE_CLOSING:
	case AVDTP_STATE_ABORTING:
	default:
		break;
	}

	source->stream_state = new_state;
}

开发者ID:Mcjesus15，项目名称:Zio_Other，代码行数:60，代码来源:source.c

示例5: async_cb

static void async_cb(GObex *obex, GError *err, GObexPacket *rsp,
							gpointer user_data)
{
	struct pending_request *p = user_data;
	struct obc_session *session = p->session;
	GError *gerr = NULL;
	uint8_t code;

	p->req_id = 0;

	if (err != NULL) {
		if (p->func)
			p->func(p->session, NULL, err, p->data);
		goto done;
	}

	code = g_obex_packet_get_operation(rsp, NULL);
	if (code != G_OBEX_RSP_SUCCESS)
		g_set_error(&gerr, OBEX_IO_ERROR, code, "%s",
							g_obex_strerror(code));

	if (p->func)
		p->func(p->session, NULL, gerr, p->data);

	if (gerr != NULL)
		g_clear_error(&gerr);

done:
	pending_request_free(p);
	session->p = NULL;

	session_process_queue(session);
}

开发者ID:dmp0x7c5，项目名称:test-repo，代码行数:33，代码来源:session.c

示例6: session_terminate_transfer

static void session_terminate_transfer(struct obc_session *session,
					struct obc_transfer *transfer,
					GError *gerr)
{
	struct pending_request *p = session->p;

	if (p == NULL || p->transfer != transfer) {
		GList *match;

		match = g_list_find_custom(session->queue->head, transfer,
						pending_transfer_cmptransfer);
		if (match == NULL)
			return;

		p = match->data;
		g_queue_delete_link(session->queue, match);
	} else
		session->p = NULL;

	obc_session_ref(session);

	if (p->func)
		p->func(session, p->transfer, gerr, p->data);

	pending_request_free(p);

	if (session->p == NULL)
		session_process_queue(session);

	obc_session_unref(session);
}

开发者ID:dmp0x7c5，项目名称:test-repo，代码行数:31，代码来源:session.c

示例7: obc_session_mkdir

guint obc_session_mkdir(struct obc_session *session, const char *folder,
				session_callback_t func, void *user_data,
				GError **err)
{
	struct pending_request *p;

	if (session->obex == NULL) {
		g_set_error(err, OBEX_IO_ERROR, OBEX_IO_DISCONNECTED,
						"Session disconnected");
		return 0;
	}

	if (session->p != NULL) {
		g_set_error(err, OBEX_IO_ERROR, OBEX_IO_BUSY, "Session busy");
		return 0;
	}


	p = pending_request_new(session, NULL, func, user_data);

	p->req_id = g_obex_mkdir(session->obex, folder, async_cb, p, err);
	if (*err != NULL) {
		pending_request_free(p);
		return 0;
	}

	session->p = p;
	return p->id;
}

开发者ID:dmp0x7c5，项目名称:test-repo，代码行数:29，代码来源:session.c

示例8: session_process_queue

static void session_process_queue(struct obc_session *session)
{
	struct pending_request *p;

	if (session->p != NULL)
		return;

	if (session->queue == NULL || g_queue_is_empty(session->queue))
		return;

	obc_session_ref(session);

	while ((p = g_queue_pop_head(session->queue))) {
		GError *gerr = NULL;

		if (p->process(p, &gerr) == 0)
			break;

		if (p->func)
			p->func(session, p->transfer, gerr, p->data);

		g_clear_error(&gerr);

		pending_request_free(p);
	}

	obc_session_unref(session);
}

开发者ID:AlanApter，项目名称:steamlink-sdk，代码行数:28，代码来源:session.c

示例9: stream_setup_retry

static gboolean stream_setup_retry(gpointer user_data)
{
	struct sink *sink = user_data;
	struct pending_request *pending = sink->connect;

	sink->retry_id = 0;

	if (sink->stream_state >= AVDTP_STATE_OPEN) {
		DBG("Stream successfully created, after XCASE connect:connect");
		if (pending->msg) {
			DBusMessage *reply;
			reply = dbus_message_new_method_return(pending->msg);
			g_dbus_send_message(pending->conn, reply);
		}
	} else {
		DBG("Stream setup failed, after XCASE connect:connect");
		if (pending->msg)
			error_failed(pending->conn, pending->msg, "Stream setup failed");
	}

	sink->connect = NULL;
	pending_request_free(sink->dev, pending);

	return FALSE;
}

开发者ID:doofus，项目名称:HP_7_18XX_Open_Source_20140206，代码行数:25，代码来源:sink.c

示例10: select_complete

static void select_complete(struct avdtp *session, struct a2dp_sep *sep,
			GSList *caps, void *user_data)
{
	struct sink *sink = user_data;
	struct pending_request *pending;
	int id;

	pending = sink->connect;
	pending->id = 0;

	id = a2dp_config(session, sep, stream_setup_complete, caps, sink);
	if (id == 0)
		goto failed;

	pending->id = id;
	return;

failed:
	if (pending->msg)
		error_failed(pending->conn, pending->msg, "Stream setup failed");
	pending_request_free(sink->dev, pending);
	sink->connect = NULL;
	avdtp_unref(sink->session);
	sink->session = NULL;
}

开发者ID:doofus，项目名称:HP_7_18XX_Open_Source_20140206，代码行数:25，代码来源:sink.c

示例11: session_process_queue

static void session_process_queue(struct obc_session *session)
{
	struct pending_request *p;

	if (session->p != NULL)
		return;

	if (session->queue == NULL || g_queue_is_empty(session->queue))
		return;

	obc_session_ref(session);

	while ((p = g_queue_pop_head(session->queue))) {
		GError *gerr = NULL;

		DBG("Transfer(%p) started", p->transfer);

		if (obc_transfer_start(p->transfer, session->obex, &gerr)) {
			session->p = p;
			break;
		}

		if (p->func)
			p->func(session, p->transfer, gerr, p->data);

		g_clear_error(&gerr);

		pending_request_free(p);
	}

	obc_session_unref(session);
}

开发者ID:dmp0x7c5，项目名称:test-repo，代码行数:32，代码来源:session.c

示例12: obc_session_shutdown

void obc_session_shutdown(struct obc_session *session)
{
	struct pending_request *p;
	GError *err;

	DBG("%p", session);

	obc_session_ref(session);

	/* Unregister any pending transfer */
	err = g_error_new(OBEX_IO_ERROR, OBEX_IO_DISCONNECTED,
						"Session closed by user");

	if (session->p != NULL && session->p->id != 0) {
		p = session->p;
		session->p = NULL;

		if (p->func)
			p->func(session, p->transfer, err, p->data);

		pending_request_free(p);
	}

	while ((p = g_queue_pop_head(session->queue))) {
		if (p->func)
			p->func(session, p->transfer, err, p->data);

		pending_request_free(p);
	}

	g_error_free(err);

	/* Unregister interfaces */
	if (session->path)
		session_unregistered(session);

	/* Disconnect transport */
	if (session->id > 0 && session->transport != NULL) {
		session->transport->disconnect(session->id);
		session->id = 0;
	}

	obc_session_unref(session);
}

开发者ID:dmp0x7c5，项目名称:test-repo，代码行数:44，代码来源:session.c

示例13: stream_setup_complete

static void stream_setup_complete(struct avdtp *session, struct a2dp_sep *sep,
					struct avdtp_stream *stream,
					struct avdtp_error *err, void *user_data)
{
	struct sink *sink = user_data;
	struct pending_request *pending;

	pending = sink->connect;

	pending->id = 0;

	if (stream) {
		DBG("Stream successfully created");

		if (pending->msg) {
			DBusMessage *reply;
			reply = dbus_message_new_method_return(pending->msg);
			g_dbus_send_message(pending->conn, reply);
		}

		sink->connect = NULL;
		pending_request_free(sink->dev, pending);

		return;
	}

	avdtp_unref(sink->session);
	sink->session = NULL;
	if (avdtp_error_category(err) == AVDTP_ERRNO
			&& avdtp_error_posix_errno(err) != EHOSTDOWN) {
		DBG("connect:connect XCASE detected");
		sink->retry_id = g_timeout_add_seconds(STREAM_SETUP_RETRY_TIMER,
							stream_setup_retry,
							sink);
	} else {
		if (pending->msg)
			error_failed(pending->conn, pending->msg, "Stream setup failed");
		sink->connect = NULL;
		pending_request_free(sink->dev, pending);
		DBG("Stream setup failed : %s", avdtp_strerror(err));
	}
}

开发者ID:doofus，项目名称:HP_7_18XX_Open_Source_20140206，代码行数:42，代码来源:sink.c

示例14: sink_free

void sink_free(struct audio_device *dev)
{
	struct sink *sink = dev->sink;

	if (sink->cb_id)
		avdtp_stream_remove_cb(sink->session, sink->stream,
					sink->cb_id);

	if (sink->session)
		avdtp_unref(sink->session);

	if (sink->connect)
		pending_request_free(sink->connect);

	if (sink->disconnect)
		pending_request_free(sink->disconnect);

	g_free(sink);
	dev->sink = NULL;
}

开发者ID:Jeanlst，项目名称:Onlive-Source-Backup，代码行数:20，代码来源:sink.c

示例15: discovery_complete

static void discovery_complete(struct avdtp *session, GSList *seps, struct avdtp_error *err,
				void *user_data)
{
	struct sink *sink = user_data;
	struct pending_request *pending;
	struct avdtp_local_sep *lsep;
	struct avdtp_remote_sep *rsep;
	GSList *caps = NULL;
	int id;

	pending = sink->connect;

	if (err) {
		avdtp_unref(sink->session);
		sink->session = NULL;
		if (avdtp_error_type(err) == AVDTP_ERROR_ERRNO
				&& avdtp_error_posix_errno(err) != EHOSTDOWN) {
			debug("connect:connect XCASE detected");
			g_timeout_add(STREAM_SETUP_RETRY_TIMER,
					stream_setup_retry, sink);
		} else
			goto failed;
		return;
	}

	debug("Discovery complete");

	if (avdtp_get_seps(session, AVDTP_SEP_TYPE_SINK, AVDTP_MEDIA_TYPE_AUDIO,
				A2DP_CODEC_SBC, &lsep, &rsep) < 0) {
		error("No matching ACP and INT SEPs found");
		goto failed;
	}

	if (!select_capabilities(session, rsep, &caps)) {
		error("Unable to select remote SEP capabilities");
		goto failed;
	}

	id = a2dp_source_config(sink->session, stream_setup_complete,
				caps, sink);
	if (id == 0)
		goto failed;

	pending->id = id;
	return;

failed:
	pending_request_free(pending);
	sink->connect = NULL;
	avdtp_unref(sink->session);
	sink->session = NULL;
	error_failed(pending->conn, pending->msg, "Stream setup failed");
}

开发者ID:Jeanlst，项目名称:Onlive-Source-Backup，代码行数:53，代码来源:sink.c

示例16: remove_request

static void remove_request (ResolveClosure *closure,
                            GrlTmdbRequest *request)
{
  GList *it;

  for (it = closure->pending_requests->head; it; it = it->next) {
    PendingRequest *const pending_request = it->data;

    if (pending_request->request == request) {
      g_queue_delete_link (closure->pending_requests, it);
      pending_request_free (pending_request);
      break;
    }
  }
}

开发者ID:GNOME，项目名称:grilo-plugins，代码行数:15，代码来源:grl-tmdb.c

示例17: discovery_complete

static void discovery_complete(struct avdtp *session, GSList *seps, struct avdtp_error *err,
				void *user_data)
{
	struct sink *sink = user_data;
	struct pending_request *pending;
	int id;

	if (!sink->connect) {
		avdtp_unref(sink->session);
		sink->session = NULL;
		return;
	}

	pending = sink->connect;

	if (err) {
		avdtp_unref(sink->session);
		sink->session = NULL;
		if (avdtp_error_category(err) == AVDTP_ERRNO
				&& avdtp_error_posix_errno(err) != EHOSTDOWN) {
			DBG("connect:connect XCASE detected");
			sink->retry_id =
				g_timeout_add_seconds(STREAM_SETUP_RETRY_TIMER,
							stream_setup_retry,
							sink);
		} else
			goto failed;
		return;
	}

	DBG("Discovery complete");

	id = a2dp_select_capabilities(sink->session, AVDTP_SEP_TYPE_SINK, NULL,
						select_complete, sink);
	if (id == 0)
		goto failed;

	pending->id = id;
	return;

failed:
	if (pending->msg)
		error_failed(pending->conn, pending->msg, "Stream setup failed");
	pending_request_free(sink->dev, pending);
	sink->connect = NULL;
	avdtp_unref(sink->session);
	sink->session = NULL;
}

开发者ID:doofus，项目名称:HP_7_18XX_Open_Source_20140206，代码行数:48，代码来源:sink.c

示例18: setpath_complete

static void setpath_complete(struct obc_session *session,
						struct obc_transfer *transfer,
						GError *err, void *user_data)
{
	struct pending_request *p = user_data;

	if (p->func)
		p->func(session, NULL, err, p->data);

	if (session->p == p)
		session->p = NULL;

	pending_request_free(p);

	session_process_queue(session);
}

开发者ID:AlanApter，项目名称:steamlink-sdk，代码行数:16，代码来源:session.c

示例19: obc_session_setpath

guint obc_session_setpath(struct obc_session *session, const char *path,
				session_callback_t func, void *user_data,
				GError **err)
{
	struct setpath_data *data;
	struct pending_request *p;
	const char *first = "";

	if (session->obex == NULL) {
		g_set_error(err, OBEX_IO_ERROR, OBEX_IO_DISCONNECTED,
						"Session disconnected");
		return 0;
	}

	if (session->p != NULL) {
		g_set_error(err, OBEX_IO_ERROR, OBEX_IO_BUSY,
							"Session busy");
		return 0;
	}

	data = g_new0(struct setpath_data, 1);
	data->func = func;
	data->user_data = user_data;
	data->remaining = g_strsplit(path, "/", 3);

	p = pending_request_new(session, NULL, setpath_complete, data);

	/* Relative path */
	if (path[0] != '/') {
		first = data->remaining[data->index];
		data->index++;
	}

	p->req_id = g_obex_setpath(session->obex, first, setpath_cb, p, err);
	if (*err != NULL)
		goto fail;

	session->p = p;

	return p->id;

fail:
	g_strfreev(data->remaining);
	g_free(data);
	pending_request_free(p);
	return 0;
}

开发者ID:dmp0x7c5，项目名称:test-repo，代码行数:47，代码来源:session.c

示例20: session_process_delete

static int session_process_delete(struct pending_request *p, GError **err)
{
    struct file_data *req = p->data;

    p->req_id = g_obex_delete(p->session->obex, req->srcname, async_cb, p,
                              err);
    if (*err != NULL)
        goto fail;

    p->session->p = p;

    return 0;

fail:
    pending_request_free(p);
    return (*err)->code;
}

开发者ID:BirdAndEarth，项目名称:RPi，代码行数:17，代码来源:session.c

注：本文中的pending_request_free函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ peq函数代码示例发布时间：2022-05-30

C++ pemalloc函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19221|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ pending_request_free函数代码示例

示例1: sink_free

示例2: stream_setup_complete

示例3: sink_shutdown

示例4: stream_state_changed

示例5: async_cb

示例6: session_terminate_transfer

示例7: obc_session_mkdir

示例8: session_process_queue

示例9: stream_setup_retry

示例10: select_complete

示例11: session_process_queue

示例12: obc_session_shutdown

示例13: stream_setup_complete

示例14: sink_free

示例15: discovery_complete

示例16: remove_request

示例17: discovery_complete

示例18: setpath_complete

示例19: obc_session_setpath

示例20: session_process_delete

请发表评论

全部评论

上一篇：

下一篇：

Delphi7客户端调用WebService（天气预报）

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053