C++ pcmcia_request_configuration函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pcmcia_request_configuration函数的典型用法代码示例。如果您正苦于以下问题：C++ pcmcia_request_configuration函数的具体用法？C++ pcmcia_request_configuration怎么用？C++ pcmcia_request_configuration使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pcmcia_request_configuration函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: pdacf_config

static int pdacf_config(struct pcmcia_device *link)
{
	struct snd_pdacf *pdacf = link->priv;
	int ret;

	snd_printdd(KERN_DEBUG "pdacf_config called\n");
	link->conf.ConfigIndex = 0x5;

	ret = pcmcia_request_io(link);
	if (ret)
		goto failed;

	ret = pcmcia_request_exclusive_irq(link, pdacf_interrupt);
	if (ret)
		goto failed;

	ret = pcmcia_request_configuration(link, &link->conf);
	if (ret)
		goto failed;

	if (snd_pdacf_assign_resources(pdacf, link->resource[0]->start,
					link->irq) < 0)
		goto failed;

	return 0;

failed:
	pcmcia_disable_device(link);
	return -ENODEV;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:30，代码来源:pdaudiocf.c

示例2: dtl1_config

static int dtl1_config(struct pcmcia_device *link)
{
	dtl1_info_t *info = link->priv;
	int i;

	/* Look for a generic full-sized window */
	link->resource[0]->end = 8;
	if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
		goto failed;

	i = pcmcia_request_irq(link, dtl1_interrupt);
	if (i != 0)
		goto failed;

	i = pcmcia_request_configuration(link, &link->conf);
	if (i != 0)
		goto failed;

	if (dtl1_open(info) != 0)
		goto failed;

	return 0;

failed:
	dtl1_release(link);
	return -ENODEV;
}

开发者ID:1703011，项目名称:asuswrt-merlin，代码行数:27，代码来源:dtl1_cs.c

示例3: prism2_cs_resume

static int prism2_cs_resume(struct pcmcia_device *pdev)
{
	struct wlandevice  *wlandev;

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
        dev_link_t *link = dev_to_instance(pdev);
#endif

	DBFENTER;

#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
	wlandev = pdev->priv;
	// XXX do something here?
#else
	wlandev = link->priv;
        link->state &= ~DEV_SUSPEND;
        if (link->state & DEV_CONFIG) {
                pcmcia_request_configuration(link->handle, &link->conf);
		// XXX do something here?
	}
#endif


	DBFEXIT;

	return 0;
}

开发者ID:kizukukoto，项目名称:WDN900_GPL，代码行数:27，代码来源:prism2_cs.c

示例4: avmcs_event

static int avmcs_event(event_t event, int priority,
			  event_callback_args_t *args)
{
    dev_link_t *link = args->client_data;

    switch (event) {
    case CS_EVENT_CARD_REMOVAL:
	link->state &= ~DEV_PRESENT;
	if (link->state & DEV_CONFIG)
		avmcs_release(link);
	break;
    case CS_EVENT_CARD_INSERTION:
	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
	avmcs_config(link);
	break;
    case CS_EVENT_PM_SUSPEND:
	link->state |= DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_RESET_PHYSICAL:
	if (link->state & DEV_CONFIG)
	    pcmcia_release_configuration(link->handle);
	break;
    case CS_EVENT_PM_RESUME:
	link->state &= ~DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_CARD_RESET:
	if (link->state & DEV_CONFIG)
	    pcmcia_request_configuration(link->handle, &link->conf);
	break;
    }
    return 0;
} /* avmcs_event */

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:32，代码来源:avm_cs.c

示例5: atmel_config

static int atmel_config(struct pcmcia_device *link)
{
	local_info_t *dev;
	int ret;
	struct pcmcia_device_id *did;

	dev = link->priv;
	did = dev_get_drvdata(&link->dev);

	dev_dbg(&link->dev, "atmel_config\n");

	/*
	  In this loop, we scan the CIS for configuration table entries,
	  each of which describes a valid card configuration, including
	  voltage, IO window, memory window, and interrupt settings.

	  We make no assumptions about the card to be configured: we use
	  just the information available in the CIS.  In an ideal world,
	  this would work for any PCMCIA card, but it requires a complete
	  and accurate CIS.  In practice, a driver usually "knows" most of
	  these things without consulting the CIS, and most client drivers
	  will only use the CIS to fill in implementation-defined details.
	*/
	if (pcmcia_loop_config(link, atmel_config_check, NULL))
		goto failed;

	if (!link->irq) {
		dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
		goto failed;
	}

	/*
	  This actually configures the PCMCIA socket -- setting up
	  the I/O windows and the interrupt mapping, and putting the
	  card and host interface into "Memory and IO" mode.
	*/
	ret = pcmcia_request_configuration(link, &link->conf);
	if (ret)
		goto failed;

	((local_info_t*)link->priv)->eth_dev =
		init_atmel_card(link->irq,
				link->io.BasePort1,
				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
				&link->dev,
				card_present,
				link);
	if (!((local_info_t*)link->priv)->eth_dev)
			goto failed;


	return 0;

 failed:
	atmel_release(link);
	return -ENODEV;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:57，代码来源:atmel_cs.c

示例6: ixj_resume

static int ixj_resume(struct pcmcia_device *dev)
{
	dev_link_t *link = dev_to_instance(dev);

	link->state &= ~DEV_SUSPEND;
	if (DEV_OK(link))
		pcmcia_request_configuration(link->handle, &link->conf);

	return 0;
}

开发者ID:ena30，项目名称:snake-os，代码行数:10，代码来源:ixj_pcmcia.c

示例7: wl_adapter_insert

void wl_adapter_insert( struct pcmcia_device *link )
{
    struct net_device       *dev;
    int i;
    int                     ret;
    /*------------------------------------------------------------------------*/

    DBG_FUNC( "wl_adapter_insert" );
    DBG_ENTER( DbgInfo );
    DBG_PARAM( DbgInfo, "link", "0x%p", link );

    dev     = link->priv;

    /* Do we need to allocate an interrupt? */
    link->conf.Attributes |= CONF_ENABLE_IRQ;

    ret = pcmcia_request_io(link, &link->io);
    if (ret != 0)
        goto failed;

    ret = pcmcia_request_irq(link, (void *) wl_isr);
    if (ret != 0)
        goto failed;

    ret = pcmcia_request_configuration(link, &link->conf);
    if (ret != 0)
        goto failed;

    dev->irq        = link->irq;
    dev->base_addr  = link->io.BasePort1;

    SET_NETDEV_DEV(dev, &link->dev);
    if (register_netdev(dev) != 0) {
	printk("%s: register_netdev() failed\n", MODULE_NAME);
	goto failed;
    }

    register_wlags_sysfs(dev);

    printk(KERN_INFO "%s: Wireless, io_addr %#03lx, irq %d, ""mac_address ",
               dev->name, dev->base_addr, dev->irq);
    for( i = 0; i < ETH_ALEN; i++ ) {
        printk("%02X%c", dev->dev_addr[i], ((i < (ETH_ALEN-1)) ? ':' : '\n'));
    }

    DBG_LEAVE( DbgInfo );
    return;

failed:
    wl_adapter_release( link );

    DBG_LEAVE(DbgInfo);
    return;
} // wl_adapter_insert

开发者ID:flwh，项目名称:Alcatel_OT_985_kernel，代码行数:54，代码来源:wl_cs.c

示例8: fdomain_resume

static int fdomain_resume(struct pcmcia_device *dev)
{
    dev_link_t *link = dev_to_instance(dev);

    link->state &= ~DEV_SUSPEND;
    if (link->state & DEV_CONFIG) {
        pcmcia_request_configuration(link->handle, &link->conf);
        fdomain_16x0_bus_reset(NULL);
    }

    return 0;
}

开发者ID:rcplay，项目名称:snake-os，代码行数:12，代码来源:fdomain_stub.c

示例9: pdacf_config

static void pdacf_config(dev_link_t *link)
{
	client_handle_t handle = link->handle;
	struct snd_pdacf *pdacf = link->priv;
	tuple_t tuple;
	cisparse_t *parse = NULL;
	config_info_t conf;
	u_short buf[32];
	int last_fn, last_ret;

	snd_printdd(KERN_DEBUG "pdacf_config called\n");
	parse = kmalloc(sizeof(*parse), GFP_KERNEL);
	if (! parse) {
		snd_printk(KERN_ERR "pdacf_config: cannot allocate\n");
		return;
	}
	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
	tuple.Attributes = 0;
	tuple.TupleData = (cisdata_t *)buf;
	tuple.TupleDataMax = sizeof(buf);
	tuple.TupleOffset = 0;
	tuple.DesiredTuple = CISTPL_CONFIG;
	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, parse));
	link->conf.ConfigBase = parse->config.base;
	link->conf.ConfigIndex = 0x5;
	kfree(parse);

	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
	link->conf.Vcc = conf.Vcc;

	/* Configure card */
	link->state |= DEV_CONFIG;

	CS_CHECK(RequestIO, pcmcia_request_io(handle, &link->io));
	CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));

	if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
		goto failed;

	link->dev = &pdacf->node;
	link->state &= ~DEV_CONFIG_PENDING;
	return;

cs_failed:
	cs_error(link->handle, last_fn, last_ret);
failed:
	pcmcia_release_configuration(link->handle);
	pcmcia_release_io(link->handle, &link->io);
	pcmcia_release_irq(link->handle, &link->irq);
}

开发者ID:canalplus，项目名称:r7oss，代码行数:53，代码来源:pdaudiocf-2.6.16.c

示例10: elsa_resume

static int elsa_resume(struct pcmcia_device *p_dev)
{
	dev_link_t *link = dev_to_instance(p_dev);
	local_info_t *dev = link->priv;

	link->state &= ~DEV_SUSPEND;
	if (link->state & DEV_CONFIG)
		pcmcia_request_configuration(link->handle, &link->conf);
        dev->busy = 0;

	return 0;
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-ef_fw-20-19-8，代码行数:12，代码来源:elsa_cs.c

示例11: vxpocket_event

/*
 * event callback
 */
static int vxpocket_event(event_t event, int priority, event_callback_args_t *args)
{
	dev_link_t *link = args->client_data;
	vx_core_t *chip = link->priv;

	switch (event) {
	case CS_EVENT_CARD_REMOVAL:
		snd_printdd(KERN_DEBUG "CARD_REMOVAL..\n");
		link->state &= ~DEV_PRESENT;
		if (link->state & DEV_CONFIG)
			chip->chip_status |= VX_STAT_IS_STALE;
		break;
	case CS_EVENT_CARD_INSERTION:
		snd_printdd(KERN_DEBUG "CARD_INSERTION..\n");
		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
		vxpocket_config(link);
		break;
#ifdef CONFIG_PM
	case CS_EVENT_PM_SUSPEND:
		snd_printdd(KERN_DEBUG "SUSPEND\n");
		link->state |= DEV_SUSPEND;
		if (chip && chip->card->pm_suspend) {
			snd_printdd(KERN_DEBUG "snd_vx_suspend calling\n");
			chip->card->pm_suspend(chip->card, PMSG_SUSPEND);
		}
		/* Fall through... */
	case CS_EVENT_RESET_PHYSICAL:
		snd_printdd(KERN_DEBUG "RESET_PHYSICAL\n");
		if (link->state & DEV_CONFIG)
			pcmcia_release_configuration(link->handle);
		break;
	case CS_EVENT_PM_RESUME:
		snd_printdd(KERN_DEBUG "RESUME\n");
		link->state &= ~DEV_SUSPEND;
		/* Fall through... */
	case CS_EVENT_CARD_RESET:
		snd_printdd(KERN_DEBUG "CARD_RESET\n");
		if (DEV_OK(link)) {
			//struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
			snd_printdd(KERN_DEBUG "requestconfig...\n");
			pcmcia_request_configuration(link->handle, &link->conf);
			if (chip && chip->card->pm_resume) {
				snd_printdd(KERN_DEBUG "calling snd_vx_resume\n");
				chip->card->pm_resume(chip->card);
			}
		}
		snd_printdd(KERN_DEBUG "resume done!\n");
		break;
#endif
	}
	return 0;
}

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:55，代码来源:vxpocket.c

示例12: qlogic_config

static int qlogic_config(struct pcmcia_device * link)
{
	scsi_info_t *info = link->priv;
	int last_ret, last_fn;
	struct Scsi_Host *host;

	DEBUG(0, "qlogic_config(0x%p)\n", link);

	last_ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	if (last_ret) {
		cs_error(link, RequestIO, last_ret);
		goto failed;
	}

	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));

	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
		/* set ATAcmd */
		outb(0xb4, link->io.BasePort1 + 0xd);
		outb(0x24, link->io.BasePort1 + 0x9);
		outb(0x04, link->io.BasePort1 + 0xd);
	}

	/* The KXL-810AN has a bigger IO port window */
	if (link->io.NumPorts1 == 32)
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->io.BasePort1 + 16, link->irq.AssignedIRQ);
	else
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->io.BasePort1, link->irq.AssignedIRQ);
	
	if (!host) {
		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
		goto cs_failed;
	}

	sprintf(info->node.dev_name, "scsi%d", host->host_no);
	link->dev_node = &info->node;
	info->host = host;

	return 0;

cs_failed:
	cs_error(link, last_fn, last_ret);
	pcmcia_disable_device(link);
failed:
	return -ENODEV;

}				/* qlogic_config */

开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:50，代码来源:qlogic_stub.c

示例13: serial_resume

static void serial_resume(dev_link_t *link)
{
	link->state &= ~DEV_SUSPEND;

	if (DEV_OK(link)) {
		struct serial_info *info = link->priv;
		int i;

		if (!info->slave)
			pcmcia_request_configuration(link->handle, &link->conf);

		for (i = 0; i < info->ndev; i++)
			serial8250_resume_port(info->line[i]);
	}
}

开发者ID:kzlin129，项目名称:tt-gpl，代码行数:15，代码来源:serial_cs.c

示例14: nmclan_resume

static int nmclan_resume(struct pcmcia_device *p_dev)
{
	dev_link_t *link = dev_to_instance(p_dev);
	struct net_device *dev = link->priv;

	link->state &= ~DEV_SUSPEND;
	if (link->state & DEV_CONFIG) {
		pcmcia_request_configuration(link->handle, &link->conf);
		if (link->open) {
			nmclan_reset(dev);
			netif_device_attach(dev);
		}
	}

	return 0;
}

开发者ID:ena30，项目名称:snake-os，代码行数:16，代码来源:nmclan_cs.c

示例15: aha152x_config_cs

static int aha152x_config_cs(struct pcmcia_device *link)
{
    scsi_info_t *info = link->priv;
    struct aha152x_setup s;
    int ret;
    struct Scsi_Host *host;

    dev_dbg(&link->dev, "aha152x_config\n");

    ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
    if (ret)
	    goto failed;

    if (!link->irq)
	    goto failed;

    ret = pcmcia_request_configuration(link, &link->conf);
    if (ret)
	    goto failed;
    
    /* Set configuration options for the aha152x driver */
    memset(&s, 0, sizeof(s));
    s.conf        = "PCMCIA setup";
    s.io_port     = link->io.BasePort1;
    s.irq         = link->irq;
    s.scsiid      = host_id;
    s.reconnect   = reconnect;
    s.parity      = parity;
    s.synchronous = synchronous;
    s.delay       = reset_delay;
    if (ext_trans)
        s.ext_trans = ext_trans;

    host = aha152x_probe_one(&s);
    if (host == NULL) {
	printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
	goto failed;
    }

    info->host = host;

    return 0;

failed:
    aha152x_release_cs(link);
    return -ENODEV;
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:47，代码来源:aha152x_stub.c

示例16: sl811_cs_config

static int sl811_cs_config(struct pcmcia_device *link)
{
	struct device		*parent = &link->dev;
	local_info_t		*dev = link->priv;
	int			ret;

	dev_dbg(&link->dev, "sl811_cs_config\n");

	if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
		goto failed;

	/* require an IRQ and two registers */
	if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
		goto failed;
	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
		ret = pcmcia_request_irq(link, &link->irq);
		if (ret)
			goto failed;
	} else
		goto failed;

	ret = pcmcia_request_configuration(link, &link->conf);
	if (ret)
		goto failed;

	sprintf(dev->node.dev_name, driver_name);
	dev->node.major = dev->node.minor = 0;
	link->dev_node = &dev->node;

	printk(KERN_INFO "%s: index 0x%02x: ",
	       dev->node.dev_name, link->conf.ConfigIndex);
	if (link->conf.Vpp)
		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
	printk(", irq %d", link->irq.AssignedIRQ);
	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
	       link->io.BasePort1+link->io.NumPorts1-1);
	printk("\n");

	if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
			< 0) {
failed:
		printk(KERN_WARNING "sl811_cs_config failed\n");
		sl811_cs_release(link);
		return  -ENODEV;
	}
	return 0;
}

开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:47，代码来源:sl811_cs.c

示例17: qlogic_resume

static int qlogic_resume(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	pcmcia_request_configuration(link, &link->conf);
	if ((info->manf_id == MANFID_MACNICA) ||
	    (info->manf_id == MANFID_PIONEER) ||
	    (info->manf_id == 0x0098)) {
		outb(0x80, link->io.BasePort1 + 0xd);
		outb(0x24, link->io.BasePort1 + 0x9);
		outb(0x04, link->io.BasePort1 + 0xd);
	}
	/* Ugggglllyyyy!!! */
	qlogicfas408_bus_reset(NULL);

	return 0;
}

开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:17，代码来源:qlogic_stub.c

示例18: mio_cs_config

static void mio_cs_config(struct pcmcia_device *link)
{
	int ret;

	DPRINTK("mio_cs_config(link=%p)\n", link);

	ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL);
	if (ret) {
		dev_warn(&link->dev, "no configuration found\n");
		return;
	}

	if (!link->irq)
		dev_info(&link->dev, "no IRQ available\n");

	ret = pcmcia_request_configuration(link, &link->conf);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:17，代码来源:ni_mio_cs.c

示例19: parport_config

static int parport_config(struct pcmcia_device *link)
{
    parport_info_t *info = link->priv;
    struct parport *p;
    int last_ret, last_fn;

    DEBUG(0, "parport_config(0x%p)\n", link);

    last_ret = pcmcia_loop_config(link, parport_config_check, NULL);
    if (last_ret) {
	    cs_error(link, RequestIO, last_ret);
	    goto failed;
    }

    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));

    p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
			      link->irq.AssignedIRQ, PARPORT_DMA_NONE,
			      &link->dev);
    if (p == NULL) {
	printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
	       "0x%3x, irq %u failed\n", link->io.BasePort1,
	       link->irq.AssignedIRQ);
	goto failed;
    }

    p->modes |= PARPORT_MODE_PCSPP;
    if (epp_mode)
	p->modes |= PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP;
    info->ndev = 1;
    info->node.major = LP_MAJOR;
    info->node.minor = p->number;
    info->port = p;
    strcpy(info->node.dev_name, p->name);
    link->dev_node = &info->node;

    return 0;

cs_failed:
    cs_error(link, last_fn, last_ret);
failed:
    parport_cs_release(link);
    return -ENODEV;
} /* parport_config */

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:45，代码来源:parport_cs.c

示例20: bluecard_config

static int bluecard_config(struct pcmcia_device *link)
{
	bluecard_info_t *info = link->priv;
	int i, n;

	link->conf.ConfigIndex = 0x20;
	link->io.NumPorts1 = 64;
	link->io.IOAddrLines = 6;

	for (n = 0; n < 0x400; n += 0x40) {
		link->io.BasePort1 = n ^ 0x300;
		i = pcmcia_request_io(link, &link->io);
		if (i == CS_SUCCESS)
			break;
	}

	if (i != CS_SUCCESS) {
		cs_error(link, RequestIO, i);
		goto failed;
	}

	i = pcmcia_request_irq(link, &link->irq);
	if (i != CS_SUCCESS) {
		cs_error(link, RequestIRQ, i);
		link->irq.AssignedIRQ = 0;
	}

	i = pcmcia_request_configuration(link, &link->conf);
	if (i != CS_SUCCESS) {
		cs_error(link, RequestConfiguration, i);
		goto failed;
	}

	if (bluecard_open(info) != 0)
		goto failed;

	strcpy(info->node.dev_name, info->hdev->name);
	link->dev_node = &info->node;

	return 0;

failed:
	bluecard_release(link);
	return -ENODEV;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:45，代码来源:bluecard_cs.c

注：本文中的pcmcia_request_configuration函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ pcmcia_request_io函数代码示例发布时间：2022-05-30

C++ pcmcia_release_configuration函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19221|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ pcmcia_request_configuration函数代码示例

示例1: pdacf_config

示例2: dtl1_config

示例3: prism2_cs_resume

示例4: avmcs_event

示例5: atmel_config

示例6: ixj_resume

示例7: wl_adapter_insert

示例8: fdomain_resume

示例9: pdacf_config

示例10: elsa_resume

示例11: vxpocket_event

示例12: qlogic_config

示例13: serial_resume

示例14: nmclan_resume

示例15: aha152x_config_cs

示例16: sl811_cs_config

示例17: qlogic_resume

示例18: mio_cs_config

示例19: parport_config

示例20: bluecard_config

请发表评论

全部评论

上一篇：

下一篇：

Delphi7客户端调用WebService（天气预报）

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053