• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ pcmcia_register_driver函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pcmcia_register_driver函数的典型用法代码示例。如果您正苦于以下问题:C++ pcmcia_register_driver函数的具体用法?C++ pcmcia_register_driver怎么用?C++ pcmcia_register_driver使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pcmcia_register_driver函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: init_cif60_cs

static int __init init_cif60_cs(void)
{
        int ret;
        ret = pcmcia_register_driver(&cif60_cs_driver);
        DEBUG(0, "cif_cs:init ret=%d\n", ret);
        return ret;
}
开发者ID:376473984,项目名称:pvb,代码行数:7,代码来源:cif_cs_stub.c


示例2: init_spectrum_cs

static int __init
init_spectrum_cs(void)
{
	printk(KERN_DEBUG "%s\n", version);

	return pcmcia_register_driver(&orinoco_driver);
}
开发者ID:12rafael,项目名称:jellytimekernel,代码行数:7,代码来源:spectrum_cs.c


示例3: prism2cs_init

static int __init prism2cs_init(void)
{
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
	servinfo_t	serv;
#endif

	DBFENTER;

        WLAN_LOG_NOTICE("%s Loaded\n", version);
        WLAN_LOG_NOTICE("dev_info is: %s\n", dev_info);

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
	pcmcia_get_card_services_info(&serv);
	if ( serv.Revision != CS_RELEASE_CODE )
	{
		printk(KERN_NOTICE"%s: CardServices release does not match!\n", dev_info);
		return -1;
	}

	/* This call will result in a call to prism2sta_attach */
	/*   and eventually prism2sta_detach */
	register_pccard_driver( &dev_info, &prism2sta_attach, &prism2sta_detach);
#else
	pcmcia_register_driver(&prism2_cs_driver);
#endif

	DBFEXIT;
	return 0;
}
开发者ID:kizukukoto,项目名称:WDN900_GPL,代码行数:29,代码来源:prism2_cs.c


示例4: init_ipwireless

/*
 * Module insertion : initialisation of the module.
 * Register the card with cardmgr...
 */
static int __init init_ipwireless(void)
{
	int ret;

	ret = ipwireless_tty_init();
	if (ret != 0)
		return ret;

	ret = pcmcia_register_driver(&me);
	if (ret != 0)
		ipwireless_tty_release();

	return ret;
}
开发者ID:avagin,项目名称:linux,代码行数:18,代码来源:main.c


示例5: wl_adapter_init_module

/*******************************************************************************
 *	wl_adapter_init_module()
 *******************************************************************************
 *
 *  DESCRIPTION:
 *
 *      Called by init_module() to perform PCMCIA driver initialization.
 *
 *  PARAMETERS:
 *
 *      N/A
 *
 *  RETURNS:
 *
 *      0 on success
 *      -1 on error
 *
 ******************************************************************************/
int wl_adapter_init_module(void)
{
	int ret;
	/*--------------------------------------------------------------------*/

	DBG_FUNC("wl_adapter_init_module");
	DBG_ENTER(DbgInfo);
	DBG_TRACE(DbgInfo, "wl_adapter_init_module() -- PCMCIA\n");

	ret = pcmcia_register_driver(&wlags49_driver);

	DBG_LEAVE(DbgInfo);
	return ret;
} /* wl_adapter_init_module */
开发者ID:0xroot,项目名称:Blackphone-BP1-Kernel,代码行数:32,代码来源:wl_cs.c


示例6: init_ipwireless

/*
 * Module insertion : initialisation of the module.
 * Register the card with cardmgr...
 */
static int __init init_ipwireless(void)
{
	int ret;

	printk(KERN_INFO IPWIRELESS_PCCARD_NAME " "
	       IPWIRELESS_PCMCIA_VERSION " by " IPWIRELESS_PCMCIA_AUTHOR "\n");

	ret = ipwireless_tty_init();
	if (ret != 0)
		return ret;

	ret = pcmcia_register_driver(&me);
	if (ret != 0)
		ipwireless_tty_release();

	return ret;
}
开发者ID:10x-Amin,项目名称:x10_Th_kernel,代码行数:21,代码来源:main.c


示例7: comedi_pcmcia_driver_register

/**
 * comedi_pcmcia_driver_register() - Register a comedi PCMCIA driver.
 * @comedi_driver: comedi_driver struct
 * @pcmcia_driver: pcmcia_driver struct
 *
 * This function is used for the module_init() of comedi USB drivers.
 * Do not call it directly, use the module_comedi_pcmcia_driver() helper
 * macro instead.
 */
int comedi_pcmcia_driver_register(struct comedi_driver *comedi_driver,
				  struct pcmcia_driver *pcmcia_driver)
{
	int ret;

	ret = comedi_driver_register(comedi_driver);
	if (ret < 0)
		return ret;

	ret = pcmcia_register_driver(pcmcia_driver);
	if (ret < 0) {
		comedi_driver_unregister(comedi_driver);
		return ret;
	}

	return 0;
}
开发者ID:AD5GB,项目名称:kernel_n5_3.10-experimental,代码行数:26,代码来源:comedi_pcmcia.c


示例8: pccard_init

//****************************************************************************
// fill struct pcmcia_driver and register it
static int pccard_init(void)
{
  DPRINTK(KERN_DEBUG "%s: pccard_init()\n", DEVICE_NAME);

#ifdef LINUX_24
  register_pccard_driver(&pccard_info, &pccard_attach, &pccard_detach);
  return 0;
#else

  memset (&pcan_drv.pccarddrv, 0, sizeof(pcan_drv.pccarddrv));

  pcan_drv.pccarddrv.owner      = THIS_MODULE;
  pcan_drv.pccarddrv.drv.name   = DEVICE_NAME;

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
  pcan_drv.pccarddrv.attach     = pccard_attach;
  pcan_drv.pccarddrv.detach     = pccard_detach;
#endif

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16)
  pcan_drv.pccarddrv.id_table   = pccard_id_table;
  pcan_drv.pccarddrv.event      = pccard_event;
  pcan_drv.pccarddrv.attach     = pccard_attach;
  pcan_drv.pccarddrv.detach     = pccard_detach;
  #endif

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
  pcan_drv.pccarddrv.id_table   = pccard_id_table;
  pcan_drv.pccarddrv.probe      = pccard_probe;
  pcan_drv.pccarddrv.remove     = pccard_detach;
  pcan_drv.pccarddrv.suspend    = pccard_suspend;
  pcan_drv.pccarddrv.resume     = pccard_resume;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
  /* this version sets pccarddrv->drv.name with pccarddrv.name => */
  /* it must be a valid pointer too */
  pcan_drv.pccarddrv.name       = DEVICE_NAME;
#endif
#endif

  return pcmcia_register_driver(&pcan_drv.pccarddrv);
#endif
}
开发者ID:CURG,项目名称:robot_server_container,代码行数:44,代码来源:pcan_pccard.c


示例9: init_fdomain_cs

static int __init init_fdomain_cs(void)
{
	return pcmcia_register_driver(&fdomain_cs_driver);
}
开发者ID:Antonio-Zhou,项目名称:Linux-2.6.11,代码行数:4,代码来源:fdomain_stub.c


示例10: init_orinoco_cs

static int __init
init_orinoco_cs(void)
{
	return pcmcia_register_driver(&orinoco_driver);
}
开发者ID:romanbb,项目名称:android_kernel_lge_d851,代码行数:5,代码来源:orinoco_cs.c


示例11: init_btuart_cs

static int __init init_btuart_cs(void)
{
	return pcmcia_register_driver(&btuart_driver);
}
开发者ID:3sOx,项目名称:asuswrt-merlin,代码行数:4,代码来源:btuart_cs.c


示例12: btuart_config

static int btuart_config(struct pcmcia_device *link)
{
	btuart_info_t *info = link->priv;
	int i;
	int try;

	/* First pass: look for a config entry that looks normal.
	   Two tries: without IO aliases, then with aliases */
	for (try = 0; try < 2; try++)
		if (!pcmcia_loop_config(link, btuart_check_config, &try))
			goto found_port;

	/* Second pass: try to find an entry that isn't picky about
	   its base address, then try to grab any standard serial port
	   address, and finally try to get any free port. */
	if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
		goto found_port;

	BT_ERR("No usable port range found");
	goto failed;

found_port:
	i = pcmcia_request_irq(link, btuart_interrupt);
	if (i != 0)
		goto failed;

	i = pcmcia_enable_device(link);
	if (i != 0)
		goto failed;

	if (btuart_open(info) != 0)
		goto failed;

	return 0;

failed:
	btuart_release(link);
	return -ENODEV;
}


static void btuart_release(struct pcmcia_device *link)
{
	btuart_info_t *info = link->priv;

	btuart_close(info);

	pcmcia_disable_device(link);
}

static const struct pcmcia_device_id btuart_ids[] = {
	/* don't use this driver. Use serial_cs + hci_uart instead */
	PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, btuart_ids);

static struct pcmcia_driver btuart_driver = {
	.owner		= THIS_MODULE,
	.name		= "btuart_cs",
	.probe		= btuart_probe,
	.remove		= btuart_detach,
	.id_table	= btuart_ids,
};

static int __init init_btuart_cs(void)
{
	return pcmcia_register_driver(&btuart_driver);
}


static void __exit exit_btuart_cs(void)
{
	pcmcia_unregister_driver(&btuart_driver);
}

module_init(init_btuart_cs);
module_exit(exit_btuart_cs);
开发者ID:1111saeid,项目名称:jb_kernel_3.0.16_htc_golfu,代码行数:77,代码来源:btuart_cs.c


示例13: init_ide_cs

static int __init init_ide_cs(void)
{
	return pcmcia_register_driver(&ide_cs_driver);
}
开发者ID:cilynx,项目名称:dd-wrt,代码行数:4,代码来源:ide-cs.c


示例14: avmcs_init

static int __init avmcs_init(void)
{
	return pcmcia_register_driver(&avmcs_driver);
}
开发者ID:Antonio-Zhou,项目名称:Linux-2.6.11,代码行数:4,代码来源:avm_cs.c


示例15: init_bluecard_cs

static int __init init_bluecard_cs(void)
{
	return pcmcia_register_driver(&bluecard_driver);
}
开发者ID:karelh,项目名称:liquidware_beagleboard_linux,代码行数:4,代码来源:bluecard_cs.c


示例16: airo_cs_init

static int airo_cs_init(void)
{
	return pcmcia_register_driver(&airo_driver);
}
开发者ID:3sOx,项目名称:asuswrt-merlin,代码行数:4,代码来源:airo_cs.c


示例17: ixj_pcmcia_init

static int __init ixj_pcmcia_init(void)
{
	return pcmcia_register_driver(&ixj_driver);
}
开发者ID:3sOx,项目名称:asuswrt-merlin,代码行数:4,代码来源:ixj_pcmcia.c


示例18: ines_pcmcia_init_module

int ines_pcmcia_init_module(void)
{
	pcmcia_register_driver(&ines_gpib_cs_driver);
	return 0;
}
开发者ID:9072997,项目名称:wikireader,代码行数:5,代码来源:ines_cs.c


示例19: init_aha152x_cs

static int __init init_aha152x_cs(void)
{
	return pcmcia_register_driver(&aha152x_cs_driver);
}
开发者ID:Antonio-Zhou,项目名称:Linux-2.6.11,代码行数:4,代码来源:aha152x_stub.c


示例20: init_vxpocket

static int __init init_vxpocket(void)
{
	return pcmcia_register_driver(&vxp_cs_driver);
}
开发者ID:1yankeedt,项目名称:D710BST_FL24_Kernel,代码行数:4,代码来源:vxpocket.c



注:本文中的pcmcia_register_driver函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ pcmcia_release_configuration函数代码示例发布时间:2022-05-30
下一篇:
C++ pcmcia_parse_tuple函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap