• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ pcim_iomap_regions函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pcim_iomap_regions函数的典型用法代码示例。如果您正苦于以下问题：C++ pcim_iomap_regions函数的具体用法？C++ pcim_iomap_regions怎么用？C++ pcim_iomap_regions使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pcim_iomap_regions函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: dw_mci_pci_probe

static int dw_mci_pci_probe(struct pci_dev *pdev,
			    const struct pci_device_id *entries)
{
	struct dw_mci *host;
	int ret;

	ret = pcim_enable_device(pdev);
	if (ret)
		return ret;

	host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL);
	if (!host)
		return -ENOMEM;

	host->irq = pdev->irq;
	host->irq_flags = IRQF_SHARED;
	host->dev = &pdev->dev;
	host->pdata = &pci_board_data;

	ret = pcim_iomap_regions(pdev, 1 << PCI_BAR_NO, pci_name(pdev));
	if (ret)
		return ret;

	host->regs = pcim_iomap_table(pdev)[PCI_BAR_NO];

	pci_set_master(pdev);

	ret = dw_mci_probe(host);
	if (ret)
		return ret;

	pci_set_drvdata(pdev, host);

	return 0;
}
开发者ID:03199618，项目名称:linux，代码行数:35，代码来源:dw_mmc-pci.c


示例2: vt6421_prepare_host

static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
{
	const struct ata_port_info *ppi[] =
		{ &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info };
	struct ata_host *host;
	int i, rc;

	*r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
	if (!host) {
		dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
		return -ENOMEM;
	}

	rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
	if (rc) {
		dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
			   "PCI BARs (errno=%d)\n", rc);
		return rc;
	}
	host->iomap = pcim_iomap_table(pdev);

	for (i = 0; i < host->n_ports; i++)
		vt6421_init_addrs(host->ports[i]);

	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;

	return 0;
}
开发者ID:3null，项目名称:fastsocket，代码行数:33，代码来源:sata_via.c


示例3: ioat_pci_probe

static int __devinit ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
	void __iomem * const *iomap;
	struct device *dev = &pdev->dev;
	struct ioatdma_device *device;
	int err;

	err = pcim_enable_device(pdev);
	if (err)
		return err;

	err = pcim_iomap_regions(pdev, 1 << IOAT_MMIO_BAR, DRV_NAME);
	if (err)
		return err;
	iomap = pcim_iomap_table(pdev);
	if (!iomap)
		return -ENOMEM;

	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
	if (err)
		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
	if (err)
		return err;

	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
	if (err)
		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
	if (err)
		return err;

	device = devm_kzalloc(dev, sizeof(*device), GFP_KERNEL);
	if (!device)
		return -ENOMEM;

	pci_set_master(pdev);

	device = alloc_ioatdma(pdev, iomap[IOAT_MMIO_BAR]);
	if (!device)
		return -ENOMEM;
	pci_set_drvdata(pdev, device);

	device->version = readb(device->reg_base + IOAT_VER_OFFSET);
	if (device->version == IOAT_VER_1_2)
		err = ioat1_dma_probe(device, ioat_dca_enabled);
	else if (device->version == IOAT_VER_2_0)
		err = ioat2_dma_probe(device, ioat_dca_enabled);
	else if (device->version >= IOAT_VER_3_0)
		err = ioat3_dma_probe(device, ioat_dca_enabled);
	else
		return -ENODEV;

	if (err) {
		dev_err(dev, "Intel(R) I/OAT DMA Engine init failed\n");
		return -ENODEV;
	}

	return 0;
}
开发者ID:KaZoom，项目名称:buildroot-linux-kernel-m3，代码行数:58，代码来源:pci.c


示例4: stmmac_pci_probe

/**
 * stmmac_pci_probe
 *
 * @pdev: pci device pointer
 * @id: pointer to table of device id/id's.
 *
 * Description: This probing function gets called for all PCI devices which
 * match the ID table and are not "owned" by other driver yet. This function
 * gets passed a "struct pci_dev *" for each device whose entry in the ID table
 * matches the device. The probe functions returns zero when the driver choose
 * to take "ownership" of the device or an error code(-ve no) otherwise.
 */
static int stmmac_pci_probe(struct pci_dev *pdev,
			    const struct pci_device_id *id)
{
	struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
	struct plat_stmmacenet_data *plat;
	struct stmmac_resources res;
	int i;
	int ret;

	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
	if (!plat)
		return -ENOMEM;

	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
					   sizeof(*plat->mdio_bus_data),
					   GFP_KERNEL);
	if (!plat->mdio_bus_data)
		return -ENOMEM;

	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
				     GFP_KERNEL);
	if (!plat->dma_cfg)
		return -ENOMEM;

	/* Enable pci device */
	ret = pci_enable_device(pdev);
	if (ret) {
		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
			__func__);
		return ret;
	}

	/* Get the base address of device */
	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
		if (pci_resource_len(pdev, i) == 0)
			continue;
		ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
		if (ret)
			return ret;
		break;
	}

	pci_set_master(pdev);

	ret = info->setup(pdev, plat);
	if (ret)
		return ret;

	pci_enable_msi(pdev);

	memset(&res, 0, sizeof(res));
	res.addr = pcim_iomap_table(pdev)[i];
	res.wol_irq = pdev->irq;
	res.irq = pdev->irq;

	return stmmac_dvr_probe(&pdev->dev, plat, &res);
}
开发者ID:avagin，项目名称:linux，代码行数:69，代码来源:stmmac_pci.c


示例5: mt76pci_probe

static int
mt76pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
	struct mt76x2_dev *dev;
	int ret;

	ret = pcim_enable_device(pdev);
	if (ret)
		return ret;

	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
	if (ret)
		return ret;

	pci_set_master(pdev);

	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
	if (ret)
		return ret;

	dev = mt76x2_alloc_device(&pdev->dev);
	if (!dev)
		return -ENOMEM;

	mt76_mmio_init(&dev->mt76, pcim_iomap_table(pdev)[0]);

	dev->mt76.rev = mt76_rr(dev, MT_ASIC_VERSION);
	dev_info(dev->mt76.dev, "ASIC revision: %08x\n", dev->mt76.rev);

	ret = devm_request_irq(dev->mt76.dev, pdev->irq, mt76x2_irq_handler,
			       IRQF_SHARED, KBUILD_MODNAME, dev);
	if (ret)
		goto error;

	ret = mt76x2_register_device(dev);
	if (ret)
		goto error;

	/* Fix up ASPM configuration */

	/* RG_SSUSB_G1_CDR_BIR_LTR = 0x9 */
	mt76_rmw_field(dev, 0x15a10, 0x1f << 16, 0x9);

	/* RG_SSUSB_G1_CDR_BIC_LTR = 0xf */
	mt76_rmw_field(dev, 0x15a0c, 0xf << 28, 0xf);

	/* RG_SSUSB_CDR_BR_PE1D = 0x3 */
	mt76_rmw_field(dev, 0x15c58, 0x3 << 6, 0x3);

	return 0;

error:
	ieee80211_free_hw(mt76_hw(dev));
	return ret;
}
开发者ID:Lyude，项目名称:linux，代码行数:55，代码来源:mt76x2_pci.c


示例6: hsu_pci_probe

static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
	struct hsu_dma_chip *chip;
	int ret;

	ret = pcim_enable_device(pdev);
	if (ret)
		return ret;

	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
	if (ret) {
		dev_err(&pdev->dev, "I/O memory remapping failed\n");
		return ret;
	}

	pci_set_master(pdev);
	pci_try_set_mwi(pdev);

	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
	if (ret)
		return ret;

	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
	if (ret)
		return ret;

	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
	if (!chip)
		return -ENOMEM;

	chip->dev = &pdev->dev;
	chip->regs = pcim_iomap_table(pdev)[0];
	chip->length = pci_resource_len(pdev, 0);
	chip->offset = HSU_PCI_CHAN_OFFSET;
	chip->irq = pdev->irq;

	pci_enable_msi(pdev);

	ret = hsu_dma_probe(chip);
	if (ret)
		return ret;

	ret = request_irq(chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip);
	if (ret)
		goto err_register_irq;

	pci_set_drvdata(pdev, chip);

	return 0;

err_register_irq:
	hsu_dma_remove(chip);
	return ret;
}
开发者ID:020gzh，项目名称:linux，代码行数:54，代码来源:pci.c


示例7: ninja32_init_one

static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	struct ata_host *host;
	struct ata_port *ap;
	void __iomem *base;
	int rc;

	host = ata_host_alloc(&dev->dev, 1);
	if (!host)
		return -ENOMEM;
	ap = host->ports[0];

	/* Set up the PCI device */
	rc = pcim_enable_device(dev);
	if (rc)
		return rc;
	rc = pcim_iomap_regions(dev, 1 << 0, DRV_NAME);
	if (rc == -EBUSY)
		pcim_pin_device(dev);
	if (rc)
		return rc;

	host->iomap = pcim_iomap_table(dev);
	rc = pci_set_dma_mask(dev, ATA_DMA_MASK);
	if (rc)
		return rc;
	rc = pci_set_consistent_dma_mask(dev, ATA_DMA_MASK);
	if (rc)
		return rc;
	pci_set_master(dev);

	/* Set up the register mappings. We use the I/O mapping as only the
	   older chips also have MMIO on BAR 1 */
	base = host->iomap[0];
	if (!base)
		return -ENOMEM;
	ap->ops = &ninja32_port_ops;
	ap->pio_mask = ATA_PIO4;
	ap->flags |= ATA_FLAG_SLAVE_POSS;

	ap->ioaddr.cmd_addr = base + 0x10;
	ap->ioaddr.ctl_addr = base + 0x1E;
	ap->ioaddr.altstatus_addr = base + 0x1E;
	ap->ioaddr.bmdma_addr = base;
	ata_sff_std_ports(&ap->ioaddr);
	ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;

	ninja32_program(base);
	/* FIXME: Should we disable them at remove ? */
	return ata_host_activate(host, dev->irq, ata_bmdma_interrupt,
				 IRQF_SHARED, &ninja32_sht);
}
开发者ID:08opt，项目名称:linux，代码行数:52，代码来源:pata_ninja32.c


示例8: scc_init_one

static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
	static int printed_version;
	unsigned int board_idx = (unsigned int) ent->driver_data;
	struct device *dev = &pdev->dev;
	struct ata_probe_ent *probe_ent;
	int rc;

	if (!printed_version++)
		dev_printk(KERN_DEBUG, &pdev->dev,
			   "version " DRV_VERSION "\n");

	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
	if (rc == -EBUSY)
		pcim_pin_device(pdev);
	if (rc)
		return rc;

	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
	if (!probe_ent)
		return -ENOMEM;

	probe_ent->dev = dev;
	INIT_LIST_HEAD(&probe_ent->node);

	probe_ent->sht 		= scc_port_info[board_idx].sht;
	probe_ent->port_flags 	= scc_port_info[board_idx].flags;
	probe_ent->pio_mask 	= scc_port_info[board_idx].pio_mask;
	probe_ent->udma_mask 	= scc_port_info[board_idx].udma_mask;
	probe_ent->port_ops 	= scc_port_info[board_idx].port_ops;

	probe_ent->irq = pdev->irq;
	probe_ent->irq_flags = IRQF_SHARED;
	probe_ent->iomap = pcim_iomap_table(pdev);

	rc = scc_host_init(probe_ent);
	if (rc)
		return rc;

	if (!ata_device_add(probe_ent))
		return -ENODEV;

	devm_kfree(dev, probe_ent);
	return 0;
}
开发者ID:420GrayFox，项目名称:dsl-n55u-bender，代码行数:49，代码来源:pata_scc.c


示例9: mt76pci_probe

static int
mt76pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
	struct mt7603_dev *dev;
	int ret;

	ret = pcim_enable_device(pdev);
	if (ret)
		return ret;

	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
	if (ret)
		return ret;

	pci_set_master(pdev);

	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
	if (ret)
		return ret;

	dev = mt7603_alloc_device(&pdev->dev);
	if (!dev)
		return -ENOMEM;

	mt76_mmio_init(&dev->mt76, pcim_iomap_table(pdev)[0]);

	pci_set_drvdata(pdev, dev);

	dev->mt76.rev = (mt76_rr(dev, MT_HW_CHIPID) << 16) |
			(mt76_rr(dev, MT_HW_REV) & 0xff);
	dev_printk(KERN_INFO, dev->mt76.dev, "ASIC revision: %04x\n", dev->mt76.rev);

	ret = devm_request_irq(dev->mt76.dev, pdev->irq, mt7603_irq_handler,
			       IRQF_SHARED, KBUILD_MODNAME, dev);
	if (ret)
		goto error;

	ret = mt7603_register_device(dev);
	if (ret)
		goto error;

	return 0;
error:
	ieee80211_free_hw(mt76_hw(dev));
	return ret;
}
开发者ID:LastRitter，项目名称:mt76，代码行数:46，代码来源:mt7603_pci.c


示例10: ce4100_spi_probe

static int ce4100_spi_probe(struct pci_dev *dev,
		const struct pci_device_id *ent)
{
	struct platform_device_info pi;
	int ret;
	struct platform_device *pdev;
	struct pxa2xx_spi_master spi_pdata;
	struct ssp_device *ssp;

	ret = pcim_enable_device(dev);
	if (ret)
		return ret;

	ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI");
	if (ret)
		return ret;

	memset(&spi_pdata, 0, sizeof(spi_pdata));
	spi_pdata.num_chipselect = dev->devfn;

	ssp = &spi_pdata.ssp;
	ssp->phys_base = pci_resource_start(dev, 0);
	ssp->mmio_base = pcim_iomap_table(dev)[0];
	if (!ssp->mmio_base) {
		dev_err(&dev->dev, "failed to ioremap() registers\n");
		return -EIO;
	}
	ssp->irq = dev->irq;
	ssp->port_id = dev->devfn;
	ssp->type = PXA25x_SSP;

	memset(&pi, 0, sizeof(pi));
	pi.parent = &dev->dev;
	pi.name = "pxa2xx-spi";
	pi.id = ssp->port_id;
	pi.data = &spi_pdata;
	pi.size_data = sizeof(spi_pdata);

	pdev = platform_device_register_full(&pi);
	if (IS_ERR(pdev))
		return PTR_ERR(pdev);

	pci_set_drvdata(dev, pdev);

	return 0;
}
开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:46，代码来源:spi-pxa2xx-pci.c


示例11: ufshcd_pci_probe

/**
 * ufshcd_pci_probe - probe routine of the driver
 * @pdev: pointer to PCI device handle
 * @id: PCI device id
 *
 * Returns 0 on success, non-zero value on failure
 */
static int
ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
	struct ufs_hba *hba;
	void __iomem *mmio_base;
	int err;

	err = pcim_enable_device(pdev);
	if (err) {
		dev_err(&pdev->dev, "pcim_enable_device failed\n");
		return err;
	}

	pci_set_master(pdev);

	err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD);
	if (err < 0) {
		dev_err(&pdev->dev, "request and iomap failed\n");
		return err;
	}

	mmio_base = pcim_iomap_table(pdev)[0];

	err = ufshcd_alloc_host(&pdev->dev, &hba);
	if (err) {
		dev_err(&pdev->dev, "Allocation failed\n");
		return err;
	}

	INIT_LIST_HEAD(&hba->clk_list_head);

	err = ufshcd_init(hba, mmio_base, pdev->irq);
	if (err) {
		dev_err(&pdev->dev, "Initialization failed\n");
		ufshcd_dealloc_host(hba);
		return err;
	}

	pci_set_drvdata(pdev, hba);
	pm_runtime_put_noidle(&pdev->dev);
	pm_runtime_allow(&pdev->dev);

	return 0;
}
开发者ID:AudioGod，项目名称:Gods_kernel_yu_msm8916，代码行数:51，代码来源:ufshcd-pci.c


示例12: dw_pci_probe

static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
{
	const struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
	struct dw_dma_chip *chip;
	int ret;

	ret = pcim_enable_device(pdev);
	if (ret)
		return ret;

	ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
	if (ret) {
		dev_err(&pdev->dev, "I/O memory remapping failed\n");
		return ret;
	}

	pci_set_master(pdev);
	pci_try_set_mwi(pdev);

	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
	if (ret)
		return ret;

	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
	if (ret)
		return ret;

	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
	if (!chip)
		return -ENOMEM;

	chip->dev = &pdev->dev;
	chip->regs = pcim_iomap_table(pdev)[0];
	chip->irq = pdev->irq;
	chip->pdata = pdata;

	ret = dw_dma_probe(chip);
	if (ret)
		return ret;

	pci_set_drvdata(pdev, chip);

	return 0;
}
开发者ID:513855417，项目名称:linux，代码行数:44，代码来源:pci.c


示例13: isci_pci_init

static int isci_pci_init(struct pci_dev *pdev)
{
	int err, bar_num, bar_mask = 0;
	void __iomem * const *iomap;

	err = pcim_enable_device(pdev);
	if (err) {
		dev_err(&pdev->dev,
			"failed enable PCI device %s!\n",
			pci_name(pdev));
		return err;
	}

	for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
		bar_mask |= 1 << (bar_num * 2);

	err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
	if (err)
		return err;

	iomap = pcim_iomap_table(pdev);
	if (!iomap)
		return -ENOMEM;

	pci_set_master(pdev);

	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
	if (err) {
		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
		if (err)
			return err;
	}

	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
	if (err) {
		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
		if (err)
			return err;
	}

	return 0;
}
开发者ID:020gzh，项目名称:linux，代码行数:42，代码来源:init.c


示例14: vt6420_prepare_host

static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
{
	const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL };
	struct ata_host *host;
	int rc;

	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
	if (rc)
		return rc;
	*r_host = host;

	rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
	if (rc) {
		dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
		return rc;
	}

	host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0);
	host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1);

	return 0;
}
开发者ID:3null，项目名称:fastsocket，代码行数:22，代码来源:sata_via.c


示例15: pcim_iomap_regions

static void __iomem *qtnf_map_bar(struct qtnf_pcie_bus_priv *priv, u8 index)
{
	void __iomem *vaddr;
	dma_addr_t busaddr;
	size_t len;
	int ret;

	ret = pcim_iomap_regions(priv->pdev, 1 << index, DRV_NAME);
	if (ret)
		return IOMEM_ERR_PTR(ret);

	busaddr = pci_resource_start(priv->pdev, index);
	len = pci_resource_len(priv->pdev, index);
	vaddr = pcim_iomap_table(priv->pdev)[index];
	if (!vaddr)
		return IOMEM_ERR_PTR(-ENOMEM);

	pr_debug("BAR%u vaddr=0x%p busaddr=%pad len=%u\n",
		 index, vaddr, &busaddr, (int)len);

	return vaddr;
}
开发者ID:Lyude，项目名称:linux，代码行数:22，代码来源:pcie.c


示例16: vt8251_prepare_host

static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
{
	const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL };
	struct ata_host *host;
	int i, rc;

	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
	if (rc)
		return rc;
	*r_host = host;

	rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
	if (rc) {
		dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
		return rc;
	}

	/* 8251 hosts four sata ports as M/S of the two channels */
	for (i = 0; i < host->n_ports; i++)
		ata_slave_link_init(host->ports[i]);

	return 0;
}
开发者ID:3null，项目名称:fastsocket，代码行数:23，代码来源:sata_via.c


示例17: vmci_guest_probe_device

/*
 * Most of the initialization at module load time is done here.
 */
static int vmci_guest_probe_device(struct pci_dev *pdev,
				   const struct pci_device_id *id)
{
	struct vmci_guest_device *vmci_dev;
	void __iomem *iobase;
	unsigned int capabilities;
	unsigned long cmd;
	int vmci_err;
	int error;

	dev_dbg(&pdev->dev, "Probing for vmci/PCI guest device\n");

	error = pcim_enable_device(pdev);
	if (error) {
		dev_err(&pdev->dev,
			"Failed to enable VMCI device: %d\n", error);
		return error;
	}

	error = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME);
	if (error) {
		dev_err(&pdev->dev, "Failed to reserve/map IO regions\n");
		return error;
	}

	iobase = pcim_iomap_table(pdev)[0];

	dev_info(&pdev->dev, "Found VMCI PCI device at %#lx, irq %u\n",
		 (unsigned long)iobase, pdev->irq);

	vmci_dev = devm_kzalloc(&pdev->dev, sizeof(*vmci_dev), GFP_KERNEL);
	if (!vmci_dev) {
		dev_err(&pdev->dev,
			"Can't allocate memory for VMCI device\n");
		return -ENOMEM;
	}

	vmci_dev->dev = &pdev->dev;
	vmci_dev->exclusive_vectors = false;
	vmci_dev->iobase = iobase;

	tasklet_init(&vmci_dev->datagram_tasklet,
		     vmci_dispatch_dgs, (unsigned long)vmci_dev);
	tasklet_init(&vmci_dev->bm_tasklet,
		     vmci_process_bitmap, (unsigned long)vmci_dev);

	vmci_dev->data_buffer = vmalloc(VMCI_MAX_DG_SIZE);
	if (!vmci_dev->data_buffer) {
		dev_err(&pdev->dev,
			"Can't allocate memory for datagram buffer\n");
		return -ENOMEM;
	}

	pci_set_master(pdev);	/* To enable queue_pair functionality. */

	/*
	 * Verify that the VMCI Device supports the capabilities that
	 * we need. If the device is missing capabilities that we would
	 * like to use, check for fallback capabilities and use those
	 * instead (so we can run a new VM on old hosts). Fail the load if
	 * a required capability is missing and there is no fallback.
	 *
	 * Right now, we need datagrams. There are no fallbacks.
	 */
	capabilities = ioread32(vmci_dev->iobase + VMCI_CAPS_ADDR);
	if (!(capabilities & VMCI_CAPS_DATAGRAM)) {
		dev_err(&pdev->dev, "Device does not support datagrams\n");
		error = -ENXIO;
		goto err_free_data_buffer;
	}

	/*
	 * If the hardware supports notifications, we will use that as
	 * well.
	 */
	if (capabilities & VMCI_CAPS_NOTIFICATIONS) {
		vmci_dev->notification_bitmap = dma_alloc_coherent(
			&pdev->dev, PAGE_SIZE, &vmci_dev->notification_base,
			GFP_KERNEL);
		if (!vmci_dev->notification_bitmap) {
			dev_warn(&pdev->dev,
				 "Unable to allocate notification bitmap\n");
		} else {
			memset(vmci_dev->notification_bitmap, 0, PAGE_SIZE);
			capabilities |= VMCI_CAPS_NOTIFICATIONS;
		}
	}

	dev_info(&pdev->dev, "Using capabilities 0x%x\n", capabilities);

	/* Let the host know which capabilities we intend to use. */
	iowrite32(capabilities, vmci_dev->iobase + VMCI_CAPS_ADDR);

	/* Set up global device so that we can start sending datagrams */
	spin_lock_irq(&vmci_dev_spinlock);
	vmci_dev_g = vmci_dev;
	vmci_pdev = pdev;
//.........这里部分代码省略.........
开发者ID:AshishNamdev，项目名称:linux，代码行数:101，代码来源:vmci_guest.c


示例18: sil680_init_one

static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
	static const struct ata_port_info info = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
		.mwdma_mask = ATA_MWDMA2,
		.udma_mask = ATA_UDMA6,
		.port_ops = &sil680_port_ops
	};
	static const struct ata_port_info info_slow = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
		.mwdma_mask = ATA_MWDMA2,
		.udma_mask = ATA_UDMA5,
		.port_ops = &sil680_port_ops
	};
	const struct ata_port_info *ppi[] = { &info, NULL };
	struct ata_host *host;
	void __iomem *mmio_base;
	int rc, try_mmio;

	ata_print_version_once(&pdev->dev, DRV_VERSION);

	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	switch (sil680_init_chip(pdev, &try_mmio)) {
		case 0:
			ppi[0] = &info_slow;
			break;
		case 0x30:
			return -ENODEV;
	}

	if (!try_mmio)
		goto use_ioports;

	/* Try to acquire MMIO resources and fallback to PIO if
	 * that fails
	 */
	rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
	if (rc)
		goto use_ioports;

	/* Allocate host and set it up */
	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
	if (!host)
		return -ENOMEM;
	host->iomap = pcim_iomap_table(pdev);

	/* Setup DMA masks */
	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	pci_set_master(pdev);

	/* Get MMIO base and initialize port addresses */
	mmio_base = host->iomap[SIL680_MMIO_BAR];
	host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
	host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
	host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
	host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
	ata_sff_std_ports(&host->ports[0]->ioaddr);
	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
	host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
	host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
	host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
	ata_sff_std_ports(&host->ports[1]->ioaddr);

	/* Register & activate */
	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
				 IRQF_SHARED, &sil680_sht);

use_ioports:
	return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
}
开发者ID:0x000000FF，项目名称:Linux4Edison，代码行数:80，代码来源:pata_sil680.c


示例19: sis_init_one


//.........这里部分代码省略.........
	/* check and see if the SCRs are in IO space or PCI cfg space */
	pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
	if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
		pi.flags |= SIS_FLAG_CFGSCR;

	/* if hardware thinks SCRs are in IO space, but there are
	 * no IO resources assigned, change to PCI cfg space.
	 */
	if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
	    ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
	     (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
		genctl &= ~GENCTL_IOMAPPED_SCR;
		pci_write_config_dword(pdev, SIS_GENCTL, genctl);
		pi.flags |= SIS_FLAG_CFGSCR;
	}

	pci_read_config_byte(pdev, SIS_PMR, &pmr);
	switch (ent->device) {
	case 0x0180:
	case 0x0181:

		/* The PATA-handling is provided by pata_sis */
		switch (pmr & 0x30) {
		case 0x10:
			ppi[1] = &sis_info133_for_sata;
			break;

		case 0x30:
			ppi[0] = &sis_info133_for_sata;
			break;
		}
		if ((pmr & SIS_PMR_COMBINED) == 0) {
			dev_info(&pdev->dev,
				 "Detected SiS 180/181/964 chipset in SATA mode\n");
			port2_start = 64;
		} else {
			dev_info(&pdev->dev,
				 "Detected SiS 180/181 chipset in combined mode\n");
			port2_start = 0;
			pi.flags |= ATA_FLAG_SLAVE_POSS;
		}
		break;

	case 0x0182:
	case 0x0183:
		pci_read_config_dword(pdev, 0x6C, &val);
		if (val & (1L << 31)) {
			dev_info(&pdev->dev, "Detected SiS 182/965 chipset\n");
			pi.flags |= ATA_FLAG_SLAVE_POSS;
		} else {
			dev_info(&pdev->dev, "Detected SiS 182/965L chipset\n");
		}
		break;

	case 0x1182:
		dev_info(&pdev->dev,
			 "Detected SiS 1182/966/680 SATA controller\n");
		pi.flags |= ATA_FLAG_SLAVE_POSS;
		break;

	case 0x1183:
		dev_info(&pdev->dev,
			 "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
		ppi[0] = &sis_info133_for_sata;
		ppi[1] = &sis_info133_for_sata;
		break;
	}

	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
	if (rc)
		return rc;

	for (i = 0; i < 2; i++) {
		struct ata_port *ap = host->ports[i];

		if (ap->flags & ATA_FLAG_SATA &&
		    ap->flags & ATA_FLAG_SLAVE_POSS) {
			rc = ata_slave_link_init(ap);
			if (rc)
				return rc;
		}
	}

	if (!(pi.flags & SIS_FLAG_CFGSCR)) {
		void __iomem *mmio;

		rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
		if (rc)
			return rc;
		mmio = host->iomap[SIS_SCR_PCI_BAR];

		host->ports[0]->ioaddr.scr_addr = mmio;
		host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
	}

	pci_set_master(pdev);
	pci_intx(pdev, 1);
	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
				 IRQF_SHARED, &sis_sht);
}
开发者ID:TheTypoMaster，项目名称:yotrino-linux-kernel，代码行数:101，代码来源:sata_sis.c


示例20: atomisp_pci_probe

static int atomisp_pci_probe(struct pci_dev *dev,
				       const struct pci_device_id *id)
{
	const struct atomisp_platform_data *pdata;
	struct atomisp_device *isp;
	unsigned int start;
	void __iomem *base;
	int err;

	if (!dev) {
		dev_err(&dev->dev, "atomisp: error device ptr\n");
		return -EINVAL;
	}

	atomisp_pci_vendor = id->vendor;
	atomisp_pci_device = id->device;

	pdata = atomisp_get_platform_data();
	if (pdata == NULL) {
		dev_err(&dev->dev, "no platform data available\n");
		return -ENODEV;
	}

	err = pcim_enable_device(dev);
	if (err) {
		dev_err(&dev->dev, "Failed to enable CI ISP device (%d)\n",
			err);
		return err;
	}

	start = pci_resource_start(dev, ATOM_ISP_PCI_BAR);
	v4l2_dbg(1, dbg_level, &atomisp_dev, "start: 0x%x\n", start);

	err = pcim_iomap_regions(dev, 1 << ATOM_ISP_PCI_BAR, pci_name(dev));
	if (err) {
		dev_err(&dev->dev, "Failed to I/O memory remapping (%d)\n",
			err);
		return err;
	}

	base = pcim_iomap_table(dev)[ATOM_ISP_PCI_BAR];
	v4l2_dbg(1, dbg_level, &atomisp_dev, "base: %p\n", base);

	atomisp_io_base = base;

	v4l2_dbg(1, dbg_level, &atomisp_dev, "atomisp_io_base: %p\n",
			atomisp_io_base);

	isp = devm_kzalloc(&dev->dev, sizeof(struct atomisp_device), GFP_KERNEL);
	if (!isp) {
		dev_err(&dev->dev, "Failed to alloc CI ISP structure\n");
		return -ENOMEM;
	}
	isp->pdev = dev;
	isp->dev = &dev->dev;
	isp->sw_contex.power_state = ATOM_ISP_POWER_UP;
	isp->pci_root = pci_get_bus_and_slot(0, 0);
	if (!isp->pci_root) {
		dev_err(&dev->dev, "Unable to find PCI host\n");
		return -ENODEV;
	}
	isp->saved_regs.ispmmadr = start;

	mutex_init(&isp->mutex);
	mutex_init(&isp->streamoff_mutex);
	spin_lock_init(&isp->lock);
	init_completion(&isp->init_done);

	isp->media_dev.driver_version = ATOMISP_CSS_VERSION_20;

	switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) {
	case ATOMISP_PCI_DEVICE_SOC_MRFLD:
	case ATOMISP_PCI_DEVICE_SOC_BYT:
		isp->media_dev.hw_revision =
			(ATOMISP_HW_REVISION_ISP2400
			 << ATOMISP_HW_REVISION_SHIFT) |
#ifdef CONFIG_ISP2400
			ATOMISP_HW_STEPPING_A0;
#else
			ATOMISP_HW_STEPPING_B0;
#endif
		break;
	default:
		/* Medfield and Clovertrail. */
		isp->media_dev.hw_revision =
			(ATOMISP_HW_REVISION_ISP2300
			 << ATOMISP_HW_REVISION_SHIFT) |
			(dev->revision < 0x09 ?
			 ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0);
	}

	isp->max_isr_latency = ATOMISP_MAX_ISR_LATENCY;
	if ((pdata->spid->platform_family_id == INTEL_CLVTP_PHONE ||
	     pdata->spid->platform_family_id == INTEL_CLVT_TABLET) &&
	    isp->pdev->revision < 0x09) {
		/* Workaround for Cloverview(+) older than stepping B0 */
		isp->max_isr_latency = CSTATE_EXIT_LATENCY_C1;
	}

	/* Load isp firmware from user space */
//.........这里部分代码省略.........
开发者ID:nel82，项目名称:android_zenfone4_JB，代码行数:101，代码来源:atomisp_v4l2.c



注：本文中的pcim_iomap_regions函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ pcim_iomap_table函数代码示例发布时间：2022-05-30
下一篇：
C++ pcim_enable_device函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap