本文整理汇总了C++中pcRel函数的典型用法代码示例。如果您正苦于以下问题：C++ pcRel函数的具体用法？C++ pcRel怎么用？C++ pcRel使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了pcRel函数的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: traceexec
static void traceexec (lua_State *L) {
lu_byte mask = L->hookmask;
if (mask > LUA_MASKLINE) { /* instruction-hook set? */
if (L->hookcount == 0) {
resethookcount(L);
luaD_callhook(L, LUA_HOOKCOUNT, -1);
return;
}
}
if (mask & LUA_MASKLINE) {
CallInfo *ci = L->ci;
Proto *p = ci_func(ci)->l.p;
int newline = getline(p, pcRel(*ci->u.l.pc, p));
if (!L->hookinit) {
luaG_inithooks(L);
return;
}
lua_assert(ci->state & CI_HASFRAME);
if (pcRel(*ci->u.l.pc, p) == 0) /* tracing may be starting now? */
ci->u.l.savedpc = *ci->u.l.pc; /* initialize `savedpc' */
/* calls linehook when enters a new line or jumps back (loop) */
if (*ci->u.l.pc <= ci->u.l.savedpc ||
newline != getline(p, pcRel(ci->u.l.savedpc, p))) {
luaD_callhook(L, LUA_HOOKLINE, newline);
ci = L->ci; /* previous call may reallocate `ci' */
}
ci->u.l.savedpc = *ci->u.l.pc;
}
}
开发者ID:TheWaWaR，项目名称:my-lua5.0，代码行数:29，代码来源:lvm.c
示例2: luaG_traceexec
void luaG_traceexec (lua_State *L) {
CallInfo *ci = L->ci;
lu_byte mask = L->hookmask;
int counthook = (--L->hookcount == 0 && (mask & LUA_MASKCOUNT));
if (counthook)
resethookcount(L); /* reset count */
else if (!(mask & LUA_MASKLINE))
return; /* no line hook and count != 0; nothing to be done */
if (ci->callstatus & CIST_HOOKYIELD) { /* called hook last time? */
ci->callstatus &= ~CIST_HOOKYIELD; /* erase mark */
return; /* do not call hook again (VM yielded, so it did not move) */
}
if (counthook)
luaD_hook(L, LUA_HOOKCOUNT, -1); /* call count hook */
if (mask & LUA_MASKLINE) {
Proto *p = ci_func(ci)->p;
int npc = pcRel(ci->u.l.savedpc, p);
int newline = getfuncline(p, npc);
if (npc == 0 || /* call linehook when enter a new function, */
ci->u.l.savedpc <= L->oldpc || /* when jump back (loop), or when */
newline != getfuncline(p, pcRel(L->oldpc, p))) /* enter a new line */
luaD_hook(L, LUA_HOOKLINE, newline); /* call line hook */
}
L->oldpc = ci->u.l.savedpc;
if (L->status == LUA_YIELD) { /* did hook yield? */
if (counthook)
L->hookcount = 1; /* undo decrement to zero */
ci->u.l.savedpc--; /* undo increment (resume will increment it again) */
ci->callstatus |= CIST_HOOKYIELD; /* mark that it yielded */
ci->func = L->top - 1; /* protect stack below results */
luaD_throw(L, LUA_YIELD);
}
}
开发者ID:chanchancl，项目名称:YDWE，代码行数:33，代码来源:ldebug.c
示例3: currentpc
static int currentpc(lua_State* L, CallInfo* ci)
{
if (!isLua(ci)) return -1; /* function is not a Lua function? */
if (ci == L->ci)
ci->savedpc = L->savedpc;
return pcRel(ci->savedpc, ci_func(ci)->l.p);
}
开发者ID:migerh，项目名称:DCPUToolchain，代码行数:7，代码来源:ldebug.c
示例4: currentpc
static int currentpc (CallInfo *ci) {
if (!isLua(ci)) return -1; /* function is not a Lua function? */
if (ci->state & CI_HASFRAME) /* function has a frame? */
ci->u.l.savedpc = *ci->u.l.pc; /* use `pc' from there */
/* function's pc is saved */
return pcRel(ci->u.l.savedpc, ci_func(ci)->l.p);
}
开发者ID:gitrider，项目名称:wxsj2，代码行数:7，代码来源:ldebug.c
示例5: traceexec
static void traceexec (lua_State *L, const Instruction *pc) {
lu_byte mask = L->hookmask;
const Instruction *oldpc = L->savedpc;
L->savedpc = pc;
if ((mask & LUA_MASKCOUNT) && L->hookcount == 0) {
resethookcount(L);
luaD_callhook(L, LUA_HOOKCOUNT, -1);
}
if (mask & LUA_MASKLINE) {
Proto *p = ci_func(L->ci)->l.p;
int npc = pcRel(pc, p);
int newline = getline(p, npc);
/* call linehook when enter a new function, when jump back (loop),
or when enter a new line */
if (npc == 0 || pc <= oldpc || newline != getline(p, pcRel(oldpc, p)))
luaD_callhook(L, LUA_HOOKLINE, newline);
}
}
开发者ID:angryzor，项目名称:luajit-tilepro64，代码行数:18，代码来源:lvm.c
示例6: traceexec
/* 内部栈跟踪
* L 虚拟机状态
*/
static void traceexec (lua_State *L) {
CallInfo *ci = L->ci; /* 获取调用链表 */
lu_byte mask = L->hookmask; /* hook掩码 */
/* 如果hook计数等于0,则重新获取hook的数量 */
int counthook = ((mask & LUA_MASKCOUNT) && L->hookcount == 0);
/* 如果计数不为空，则重新设置 */
if (counthook)
resethookcount(L); /* reset count */
/* 最后一次调用hook函数 */
if (ci->callstatus & CIST_HOOKYIELD) { /* called hook last time? */
/* 取消hook调用掩码 */
ci->callstatus &= ~CIST_HOOKYIELD; /* erase mark */
return; /* do not call hook again (VM yielded, so it did not move) */
}
/* 如果hook计数不为空,则调用hook函数 */
if (counthook)
luaD_hook(L, LUA_HOOKCOUNT, -1); /* call count hook */
/* 行hook */
if (mask & LUA_MASKLINE) {
Proto *p = ci_func(ci)->p;
int npc = pcRel(ci->u.l.savedpc, p);
int newline = getfuncline(p, npc);
if (npc == 0 || /* call linehook when enter a new function, */
ci->u.l.savedpc <= L->oldpc || /* when jump back (loop), or when */
newline != getfuncline(p, pcRel(L->oldpc, p))) /* enter a new line */
luaD_hook(L, LUA_HOOKLINE, newline); /* call line hook */
}
/* 保存要返回的pc寄存器的值 */
L->oldpc = ci->u.l.savedpc;
/* 如果虚拟机的状态是挂起 */
if (L->status == LUA_YIELD) { /* did hook yield? */
if (counthook)
L->hookcount = 1; /* undo decrement to zero */
ci->u.l.savedpc--; /* undo increment (resume will increment it again) */
ci->callstatus |= CIST_HOOKYIELD; /* mark that it yielded */
ci->func = L->top - 1; /* protect stack below results */
luaD_throw(L, LUA_YIELD);
}
}
开发者ID:devilogic，项目名称:xlua，代码行数:46，代码来源:lvm.c
示例7: traceexec
// [@lvm] 检查并调用hook函数
static void traceexec (lua_State *L, const Instruction *pc) {
lu_byte mask = L->hookmask;
const Instruction *oldpc = L->savedpc;
L->savedpc = pc;
if (mask > LUA_MASKLINE) { /* instruction-hook set? */
if (L->hookcount == 0) {
resethookcount(L);
luaD_callhook(L, LUA_HOOKCOUNT, -1);
}
}
if (mask & LUA_MASKLINE) {
Proto *p = ci_func(L->ci)->l.p;
int npc = pcRel(pc, p); //now pc
int newline = getline(p, npc);
/* call linehook when enter a new function, when jump back (loop),
or when enter a new line */
// 看仔细了：`when jump back`，对应pc <= oldpc。这也算newline，所以导致
// LDT会在同一行停呀停！
if (npc == 0 || pc <= oldpc || newline != getline(p, pcRel(oldpc, p)))
luaD_callhook(L, LUA_HOOKLINE, newline);
}
}
开发者ID:anod221，项目名称:Lua51SourceCodeNote，代码行数:23，代码来源:lvm.c
示例8: traceexec
static void traceexec (lua_State *L) {
CallInfo *ci = L->ci;
lu_byte mask = L->hookmask;
if ((mask & LUA_MASKCOUNT) && L->hookcount == 0) {
resethookcount(L);
luaD_hook(L, LUA_HOOKCOUNT, -1);
}
if (mask & LUA_MASKLINE) {
Proto *p = ci_func(ci)->p;
int npc = pcRel(ci->u.l.savedpc, p);
int newline = getfuncline(p, npc);
if (npc == 0 || /* call linehook when enter a new function, */
ci->u.l.savedpc <= L->oldpc || /* when jump back (loop), or when */
newline != getfuncline(p, pcRel(L->oldpc, p))) /* enter a new line */
luaD_hook(L, LUA_HOOKLINE, newline);
}
L->oldpc = ci->u.l.savedpc;
if (L->status == LUA_YIELD) { /* did hook yield? */
ci->u.l.savedpc--; /* undo increment (resume will increment it again) */
luaD_throw(L, LUA_YIELD);
}
}
开发者ID:alucard-dracula，项目名称:yggdrasil，代码行数:22，代码来源:lvm.c
示例9: currentpc
static int currentpc (CallInfo *ci) {
lua_assert(isLua(ci));
return pcRel(ci->u.l.savedpc, ci_func(ci)->p);
}
开发者ID:crazii，项目名称:mameplus，代码行数:4，代码来源:ldebug.c
注：本文中的pcRel函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论