static void __init arch_mem_init(char **cmdline_p)
{
	extern void plat_mem_setup(void);

	/* call board setup routine */
	plat_mem_setup();

	pr_info("Determined physical RAM map:\n");
	print_memory_map();

	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);

	*cmdline_p = command_line;

	parse_early_param();

	if (usermem) {
		pr_info("User-defined physical RAM map:\n");
		print_memory_map();
	}
    
	bootmem_init();
#ifndef CONFIG_NLM_16G_MEM_SUPPORT
#ifndef CONFIG_NUMA
	setup_mapped_kernel_tlbs(FALSE, TRUE);
#endif
#endif
	sparse_init();
	paging_init();
}

void __init shmobile_setup_console(void)
{
	parse_early_param();

	/* Let earlyprintk output early console messages */
	early_platform_driver_probe("earlyprintk", 1, 1);
}

void __init setup_arch(char **cmdline_p)
{
	init_mm.start_code = (unsigned long) _stext;
	init_mm.end_code   = (unsigned long) _etext;
	init_mm.end_data   = (unsigned long) _edata;
	init_mm.brk        = (unsigned long) _end;

	*cmdline_p = boot_command_line;

	parse_early_param();

	setup_bootmem();
	paging_init();
	unflatten_device_tree();

#ifdef CONFIG_SWIOTLB
	swiotlb_init(1);
#endif

#ifdef CONFIG_SMP
	setup_smp();
#endif

#ifdef CONFIG_DUMMY_CONSOLE
	conswitchp = &dummy_con;
#endif

	riscv_fill_hwcap();
}

void __init early_init_devtree(void *params)
{
	pr_debug(" -> early_init_devtree(%p)\n", params);

	/* Setup flat device-tree pointer */
	initial_boot_params = params;

	/* Retrieve various informations from the /chosen node of the
	 * device-tree, including the platform type, initrd location and
	 * size, TCE reserve, and more ...
	 */
	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);

	/* Scan memory nodes and rebuild MEMBLOCKs */
	of_scan_flat_dt(early_init_dt_scan_root, NULL);
	of_scan_flat_dt(early_init_dt_scan_memory, NULL);

	/* Save command line for /proc/cmdline and then parse parameters */
	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
	parse_early_param();

	memblock_allow_resize();

	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());

	pr_debug(" <- early_init_devtree()\n");
}

static void __init arch_mem_init(char **cmdline_p)
{
	extern void plat_mem_setup(void);

	/* call board setup routine */
	plat_mem_setup();

	printk("Determined physical RAM map:\n");
	print_memory_map();

	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);

	*cmdline_p = command_line;

	parse_early_param();

	if (usermem) {
		printk("User-defined physical RAM map:\n");
		print_memory_map();
	}

	bootmem_init();
#ifdef CONFIG_SPARSEMEM
        sparse_memory_present_with_active_regions(MAX_NUMNODES);
#endif
	sparse_init();
	paging_init();
}

void __init setup_arch(char **cmdline_p)
{
	handle_uboot_args();

	/* Save unparsed command line copy for /proc/cmdline */
	*cmdline_p = boot_command_line;

	/* To force early parsing of things like mem=xxx */
	parse_early_param();

	/* Platform/board specific: e.g. early console registration */
	if (machine_desc->init_early)
		machine_desc->init_early();

	smp_init_cpus();

	setup_processor();
	setup_arch_memory();

	/* copy flat DT out of .init and then unflatten it */
	unflatten_and_copy_device_tree();

	/* Can be issue if someone passes cmd line arg "ro"
	 * But that is unlikely so keeping it as it is
	 */
	root_mountflags &= ~MS_RDONLY;

#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
	conswitchp = &dummy_con;
#endif

	arc_unwind_init();
}

void __init setup_arch(char **cmdline_p)
{
#ifdef CONFIG_ARC_UBOOT_SUPPORT
	/* make sure that uboot passed pointer to cmdline/dtb is valid */
	if (uboot_tag && is_kernel((unsigned long)uboot_arg))
		panic("Invalid uboot arg\n");

	/* See if u-boot passed an external Device Tree blob */
	machine_desc = setup_machine_fdt(uboot_arg);	/* uboot_tag == 2 */
	if (!machine_desc)
#endif
	{
		/* No, so try the embedded one */
		machine_desc = setup_machine_fdt(__dtb_start);
		if (!machine_desc)
			panic("Embedded DT invalid\n");

		/*
		 * If we are here, it is established that @uboot_arg didn't
		 * point to DT blob. Instead if u-boot says it is cmdline,
		 * append to embedded DT cmdline.
		 * setup_machine_fdt() would have populated @boot_command_line
		 */
		if (uboot_tag == 1) {
			/* Ensure a whitespace between the 2 cmdlines */
			strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
			strlcat(boot_command_line, uboot_arg,
				COMMAND_LINE_SIZE);
		}
	}

	/* Save unparsed command line copy for /proc/cmdline */
	*cmdline_p = boot_command_line;

	/* To force early parsing of things like mem=xxx */
	parse_early_param();

	/* Platform/board specific: e.g. early console registration */
	if (machine_desc->init_early)
		machine_desc->init_early();

	smp_init_cpus();

	setup_processor();
	setup_arch_memory();

	/* copy flat DT out of .init and then unflatten it */
	unflatten_and_copy_device_tree();

	/* Can be issue if someone passes cmd line arg "ro"
	 * But that is unlikely so keeping it as it is
	 */
	root_mountflags &= ~MS_RDONLY;

#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
	conswitchp = &dummy_con;
#endif

	arc_unwind_init();
}

static __init void meson_init_early(void)
{///boot seq 1
	mesonplat_register_device_early("meson_uart","AO",NULL);
	parse_early_param();
	/* Let earlyprintk output early console messages */
	early_platform_driver_probe("earlyprintk", 4, 0);
	
}

void __init
setup_arch(char **cmdline_p)
{
        /*
         * print what head.S has found out about the machine
         */
#ifndef CONFIG_64BIT
	printk((MACHINE_IS_VM) ?
	       "We are running under VM (31 bit mode)\n" :
	       "We are running native (31 bit mode)\n");
	printk((MACHINE_HAS_IEEE) ?
	       "This machine has an IEEE fpu\n" :
	       "This machine has no IEEE fpu\n");
#else /* CONFIG_64BIT */
	printk((MACHINE_IS_VM) ?
	       "We are running under VM (64 bit mode)\n" :
	       "We are running native (64 bit mode)\n");
#endif /* CONFIG_64BIT */

	/* Save unparsed command line copy for /proc/cmdline */
	strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);

	*cmdline_p = COMMAND_LINE;
	*(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0';

        ROOT_DEV = Root_RAM0;

	init_mm.start_code = PAGE_OFFSET;
	init_mm.end_code = (unsigned long) &_etext;
	init_mm.end_data = (unsigned long) &_edata;
	init_mm.brk = (unsigned long) &_end;

	if (MACHINE_HAS_MVCOS)
		memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess));
	else
		memcpy(&uaccess, &uaccess_std, sizeof(uaccess));

	parse_early_param();

	setup_memory_end();
	setup_addressing_mode();
	setup_memory();
	setup_resources();
	setup_lowcore();

        cpu_init();
        __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
	smp_setup_cpu_possible_map();

	/*
	 * Create kernel page tables and switch to virtual addressing.
	 */
        paging_init();

        /* Setup default console */
	conmode_default();
}

void __init setup_arch(char **cmdline_p)
{
	char *p = &external_cmdline_buffer;

	/*
	 * These will eventually be pulled in via either some hypervisor
	 * or devicetree description.  Hardwiring for now.
	 */
	pcycle_freq_mhz = 600;
	thread_freq_mhz = 100;
	sleep_clk_freq = 32000;

	/*
	 * Set up event bindings to handle exceptions and interrupts.
	 */
	__vmsetvec(_K_VM_event_vector);

	printk(KERN_INFO "PHYS_OFFSET=0x%08x\n", PHYS_OFFSET);

	/*
	 * Simulator has a few differences from the hardware.
	 * For now, check uninitialized-but-mapped memory
	 * prior to invoking setup_arch_memory().
	 */
	if (*(int *)((unsigned long)_end + 8) == 0x1f1f1f1f)
		on_simulator = 1;
	else
		on_simulator = 0;

	if (p[0] != '\0')
		strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
	else
		strlcpy(boot_command_line, default_command_line,
			COMMAND_LINE_SIZE);

	/*
	 * boot_command_line and the value set up by setup_arch
	 * are both picked up by the init code. If no reason to
	 * make them different, pass the same pointer back.
	 */
	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
	*cmdline_p = cmd_line;

	parse_early_param();

	setup_arch_memory();

#ifdef CONFIG_SMP
	smp_start_cpus();
#endif
}

void __init setup_arch(char **cmdline_p)
{
	/* This also populates @boot_command_line from /bootargs */
	machine_desc = setup_machine_fdt(__dtb_start);
	if (!machine_desc)
		panic("Embedded DT invalid\n");

	/* Append any u-boot provided cmdline */
#ifdef CONFIG_CMDLINE_UBOOT
	/* Add a whitespace seperator between the 2 cmdlines */
	strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
	strlcat(boot_command_line, command_line, COMMAND_LINE_SIZE);
#endif

	/* Save unparsed command line copy for /proc/cmdline */
	*cmdline_p = boot_command_line;

	/* To force early parsing of things like mem=xxx */
	parse_early_param();

	/* Platform/board specific: e.g. early console registration */
	if (machine_desc->init_early)
		machine_desc->init_early();

	setup_processor();

#ifdef CONFIG_SMP
	smp_init_cpus();
#endif

	setup_arch_memory();

	/* copy flat DT out of .init and then unflatten it */
	copy_devtree();
	unflatten_device_tree();

	/* Can be issue if someone passes cmd line arg "ro"
	 * But that is unlikely so keeping it as it is
	 */
	root_mountflags &= ~MS_RDONLY;

	console_verbose();

#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
	conswitchp = &dummy_con;
#endif

	arc_unwind_init();
	arc_unwind_setup();
}

static void __init arch_mem_init(char **cmdline_p)
{
	extern void plat_mem_setup(void);

	phys_t init_mem, init_end, init_size;

	/* call board setup routine */
	plat_mem_setup();

	init_mem = PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT;
	init_end = PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT;
	init_size = init_end - init_mem;
	if (init_size) {
		/* Make sure it is in the boot_mem_map */
		int i, found;
		found = 0;
		for (i = 0; i < boot_mem_map.nr_map; i++) {
			if (init_mem >= boot_mem_map.map[i].addr &&
			    init_mem < (boot_mem_map.map[i].addr +
					boot_mem_map.map[i].size)) {
				found = 1;
				break;
			}
		}
		if (!found)
			add_memory_region(init_mem, init_size,
					  BOOT_MEM_INIT_RAM);
	}

	printk("Determined physical RAM map:\n");
	print_memory_map();

	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);

	*cmdline_p = command_line;

	parse_early_param();

	if (usermem) {
		printk("User-defined physical RAM map:\n");
		print_memory_map();
	}

	bootmem_init();
	sparse_init();
	paging_init();
}

static void __init arch_mem_init(char **cmdline_p)
{
	extern void plat_mem_setup(void);

	/* call board setup routine */
	plat_mem_setup();

	pr_info("Determined physical RAM map:\n");
	print_memory_map();

#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_CMDLINE_OVERRIDE
	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else
	if (builtin_cmdline[0]) {
		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
	}
	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
#else
	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);

	*cmdline_p = command_line;

	parse_early_param();

	if (usermem) {
		pr_info("User-defined physical RAM map:\n");
		print_memory_map();
	}

	bootmem_init();

#if defined (CONFIG_RALINK_MT7621) && defined (CONFIG_RT2880_DRAM_512M)
	reserve_bootmem(0x1C000000, 64*1024*1024, BOOTMEM_DEFAULT);
#endif

	device_tree_init();
	sparse_init();
	plat_swiotlb_setup();
	paging_init();
}

static void __init arch_mem_init(char **cmdline_p)
{
	extern void plat_mem_setup(void);

	/* call board setup routine */
	plat_mem_setup();

	pr_info("Determined physical RAM map:\n");
	print_memory_map();

#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_CMDLINE_OVERRIDE
	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else
	if (builtin_cmdline[0]) {
		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
	}
	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
#else
	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);

	*cmdline_p = command_line;

	parse_early_param();

	if (usermem) {
		pr_info("User-defined physical RAM map:\n");
		print_memory_map();
	}

	bootmem_init();
	sparse_init();
	paging_init();

#ifdef CONFIG_DUMP_PREV_OOPS_MSG
	reserve_bootmem(CPHYSADDR(CONFIG_DUMP_PREV_OOPS_MSG_BUF_ADDR), CONFIG_DUMP_PREV_OOPS_MSG_BUF_LEN, BOOTMEM_DEFAULT);
#endif
}

static void __init arch_mem_init(char **cmdline_p)
{
	extern void plat_mem_setup(void);

	/* call board setup routine */
	plat_mem_setup();

	pr_info("Determined physical RAM map:\n");
	print_memory_map();

#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_CMDLINE_OVERRIDE
	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else
	if (builtin_cmdline[0]) {
		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
	}
	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
#else
	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
#endif
	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);

	*cmdline_p = command_line;

	parse_early_param();

	if (usermem) {
		pr_info("User-defined physical RAM map:\n");
		print_memory_map();
	}

	bootmem_init();
	device_tree_init();
	sparse_init();
	paging_init();
}

void __init early_init_devtree(void *params)
{
	pr_debug(" -> early_init_devtree(%p)\n", params);

	
	initial_boot_params = params;

	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);

	
	of_scan_flat_dt(early_init_dt_scan_root, NULL);
	of_scan_flat_dt(early_init_dt_scan_memory, NULL);

	
	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
	parse_early_param();

	memblock_allow_resize();

	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());

	pr_debug(" <- early_init_devtree()\n");
}

void __init
setup_arch(char **cmdline_p)
{
        /*
         * print what head.S has found out about the machine
         */
#ifndef CONFIG_64BIT
	if (MACHINE_IS_VM)
		pr_info("Linux is running as a z/VM "
			"guest operating system in 31-bit mode\n");
	else if (MACHINE_IS_LPAR)
		pr_info("Linux is running natively in 31-bit mode\n");
	if (MACHINE_HAS_IEEE)
		pr_info("The hardware system has IEEE compatible "
			"floating point units\n");
	else
		pr_info("The hardware system has no IEEE compatible "
			"floating point units\n");
#else /* CONFIG_64BIT */
	if (MACHINE_IS_VM)
		pr_info("Linux is running as a z/VM "
			"guest operating system in 64-bit mode\n");
	else if (MACHINE_IS_KVM)
		pr_info("Linux is running under KVM in 64-bit mode\n");
	else if (MACHINE_IS_LPAR)
		pr_info("Linux is running natively in 64-bit mode\n");
#endif /* CONFIG_64BIT */

	/* Have one command line that is parsed and saved in /proc/cmdline */
	/* boot_command_line has been already set up in early.c */
	*cmdline_p = boot_command_line;

        ROOT_DEV = Root_RAM0;

	init_mm.start_code = PAGE_OFFSET;
	init_mm.end_code = (unsigned long) &_etext;
	init_mm.end_data = (unsigned long) &_edata;
	init_mm.brk = (unsigned long) &_end;

	if (MACHINE_HAS_MVCOS)
		memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess));
	else
		memcpy(&uaccess, &uaccess_std, sizeof(uaccess));

	parse_early_param();

	setup_ipl();
	setup_memory_end();
	setup_addressing_mode();
	setup_memory();
	setup_resources();
	setup_lowcore();

        cpu_init();
	s390_init_cpu_topology();

	/*
	 * Setup capabilities (ELF_HWCAP & ELF_PLATFORM).
	 */
	setup_hwcaps();

	/*
	 * Create kernel page tables and switch to virtual addressing.
	 */
        paging_init();

        /* Setup default console */
	conmode_default();
	set_preferred_console();

	/* Setup zfcpdump support */
	setup_zfcpdump(console_devno);
}

asmlinkage void __init start_kernel(void)
{
	char * command_line;
	extern struct kernel_param __start___param[], __stop___param[];
#ifdef CONFIG_RTAI_RTSPMM
        unsigned int indice_part;
        /* Size of the needed memory block by the configuration */
        unsigned long rt_mem_block_size = 0;
#endif
/*
 * Interrupts are still disabled. Do necessary setups, then
 * enable them
 */
	lock_kernel();
	page_address_init();
	printk(linux_banner);
	setup_arch(&command_line);
	setup_per_cpu_areas();

	/*
	 * Mark the boot cpu "online" so that it can call console drivers in
	 * printk() and can access its per-cpu storage.
	 */
	smp_prepare_boot_cpu();

	/*
	 * Set up the scheduler prior starting any interrupts (such as the
	 * timer interrupt). Full topology setup happens at smp_init()
	 * time - but meanwhile we still have a functioning scheduler.
	 */
	sched_init();
	/*
	 * Disable preemption - early bootup scheduling is extremely
	 * fragile until we cpu_idle() for the first time.
	 */
	preempt_disable();
	build_all_zonelists();
	page_alloc_init();
	early_init_hardirqs();
	printk("Kernel command line: %s\n", saved_command_line);
	parse_early_param();
	parse_args("Booting kernel", command_line, __start___param,
		   __stop___param - __start___param,
		   &unknown_bootoption);
	sort_main_extable();
	trap_init();
	rcu_init();
	init_IRQ();
	pidhash_init();
	init_timers();
	softirq_init();
	time_init();

	/*
	 * HACK ALERT! This is early. We're enabling the console before
	 * we've done PCI setups etc, and console_init() must be aware of
	 * this. But we do want output early, in case something goes wrong.
	 */
	console_init();
	if (panic_later)
		panic(panic_later, panic_param);

#ifdef CONFIG_RTAI_RTSPMM
        /* Allocate a big and continuous memory block for the module SPMM
           included in the RTAI functionalities */
        printk("--- Memory Allocation for the module rt_spmm ---\n");
        /* WARNING
           We need to add some space for the structures vrtxptext and vrtxpt and the partitions bitmap
           that the module rt_spmm uses to handle the blocks in each partition */
        /* for each defined partitions */
        for(indice_part = 0; indice_part <  RT_MAX_PART_NUM; indice_part ++)
          {
            if ((rt_partitions_table[indice_part].block_size != 0) &&
                (rt_partitions_table[indice_part].num_of_blocks != 0))
              {
                rt_partitions_table[indice_part].part_size =
                  (rt_partitions_table[indice_part].block_size + XN_NBBY)
                  *rt_partitions_table[indice_part].num_of_blocks +
                  + sizeof(vrtxptext_t)+sizeof(vrtxpt_t);
                rt_mem_block_size += rt_partitions_table[indice_part].part_size;
              }
          }
#ifdef CONFIG_RTAI_PART_DMA
        printk("Allocate memory in the low part of memory\n");
        rt_mem_block_ptr=(void*)alloc_bootmem_low(rt_mem_block_size + PAGE_SIZE-1);
#else
        printk("Allocate memory in the standard part of memory\n");
        rt_mem_block_ptr=(void*)alloc_bootmem(rt_mem_block_size + PAGE_SIZE-1);
#endif /* CONFIG_PART_DMA */
        printk("Needed Memory Size : %lu\n", rt_mem_block_size);
        printk("Allocated Memory Size : %lu\n", rt_mem_block_size + PAGE_SIZE-1);
        printk("Memory block address : 0x%x\n", (unsigned int)rt_mem_block_ptr);
        printk("-----------------------------------------------\n");
#endif /* CONFIG_RTAI_RTSPMM */

	profile_init();
	local_irq_enable();
#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start && !initrd_below_start_ok &&
			initrd_start < min_low_pfn << PAGE_SHIFT) {
//.........这里部分代码省略.........

/*static*/ void __init iSeries_init_early(void)
{
	extern unsigned long memory_limit;

	DBG(" -> iSeries_init_early()\n");

	ppcdbg_initialize();

#if defined(CONFIG_BLK_DEV_INITRD)
	/*
	 * If the init RAM disk has been configured and there is
	 * a non-zero starting address for it, set it up
	 */
	if (naca->xRamDisk) {
		initrd_start = (unsigned long)__va(naca->xRamDisk);
		initrd_end = initrd_start + naca->xRamDiskSize * PAGE_SIZE;
		initrd_below_start_ok = 1;	// ramdisk in kernel space
		ROOT_DEV = Root_RAM0;
		if (((rd_size * 1024) / PAGE_SIZE) < naca->xRamDiskSize)
			rd_size = (naca->xRamDiskSize * PAGE_SIZE) / 1024;
	} else
#endif /* CONFIG_BLK_DEV_INITRD */
	{
	    /* ROOT_DEV = MKDEV(VIODASD_MAJOR, 1); */
	}

	iSeries_recal_tb = get_tb();
	iSeries_recal_titan = HvCallXm_loadTod();

	/*
	 * Cache sizes must be initialized before hpte_init_iSeries is called
	 * as the later need them for flush_icache_range()
	 */
	setup_iSeries_cache_sizes();

	/*
	 * Initialize the hash table management pointers
	 */
	hpte_init_iSeries();

	/*
	 * Initialize the DMA/TCE management
	 */
	tce_init_iSeries();

	/*
	 * Initialize the table which translate Linux physical addresses to
	 * AS/400 absolute addresses
	 */
	build_iSeries_Memory_Map();

	iSeries_get_cmdline();

	/* Save unparsed command line copy for /proc/cmdline */
	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);

	/* Parse early parameters, in particular mem=x */
	parse_early_param();

	if (memory_limit) {
		if (memory_limit < systemcfg->physicalMemorySize)
			systemcfg->physicalMemorySize = memory_limit;
		else {
			printk("Ignoring mem=%lu >= ram_top.\n", memory_limit);
			memory_limit = 0;
		}
	}

	/* Bolt kernel mappings for all of memory (or just a bit if we've got a limit) */
	iSeries_bolt_kernel(0, systemcfg->physicalMemorySize);

	lmb_init();
	lmb_add(0, systemcfg->physicalMemorySize);
	lmb_analyze();
	lmb_reserve(0, __pa(klimit));

	/* Initialize machine-dependency vectors */
#ifdef CONFIG_SMP
	smp_init_iSeries();
#endif
	if (itLpNaca.xPirEnvironMode == 0) 
		piranha_simulator = 1;

	/* Associate Lp Event Queue 0 with processor 0 */
	HvCallEvent_setLpEventQueueInterruptProc(0, 0);

	mf_init();
	mf_initialized = 1;
	mb();

	/* If we were passed an initrd, set the ROOT_DEV properly if the values
	 * look sensible. If not, clear initrd reference.
	 */
#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
	    initrd_end > initrd_start)
		ROOT_DEV = Root_RAM0;
	else
		initrd_start = initrd_end = 0;
#endif /* CONFIG_BLK_DEV_INITRD */
//.........这里部分代码省略.........

void __init setup_arch(char **cmdline_p)
{
	enable_mmu();

	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);

#ifdef CONFIG_BLK_DEV_RAM
	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
#endif

	if (!MOUNT_ROOT_RDONLY)
		root_mountflags &= ~MS_RDONLY;
	init_mm.start_code = (unsigned long) _text;
	init_mm.end_code = (unsigned long) _etext;
	init_mm.end_data = (unsigned long) _edata;
	init_mm.brk = (unsigned long) _end;

	code_resource.start = virt_to_phys(_text);
	code_resource.end = virt_to_phys(_etext)-1;
	data_resource.start = virt_to_phys(_etext);
	data_resource.end = virt_to_phys(_edata)-1;

	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
	memory_end = memory_start + __MEMORY_SIZE;

#ifdef CONFIG_CMDLINE_BOOL
	strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
#else
	strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
#endif

	/* Save unparsed command line copy for /proc/cmdline */
	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
	*cmdline_p = command_line;

	parse_early_param();

	sh_mv_setup();

	/*
	 * Find the highest page frame number we have available
	 */
	max_pfn = PFN_DOWN(__pa(memory_end));

	/*
	 * Determine low and high memory ranges:
	 */
	max_low_pfn = max_pfn;
	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;

	nodes_clear(node_online_map);

	/* Setup bootmem with available RAM */
	setup_memory();
	sparse_init();

#ifdef CONFIG_DUMMY_CONSOLE
	conswitchp = &dummy_con;
#endif

	/* Perform the machine specific initialisation */
	if (likely(sh_mv.mv_setup))
		sh_mv.mv_setup(cmdline_p);

	paging_init();
}