• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ pam_setcred函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pam_setcred函数的典型用法代码示例。如果您正苦于以下问题：C++ pam_setcred函数的具体用法？C++ pam_setcred怎么用？C++ pam_setcred使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pam_setcred函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: xlsh_session_open

int xlsh_session_open(const char* service, const char* user,
                      pam_handle_t** handle)
{
  struct pam_conv conv = { xlsh_session_conv, NULL };
  pam_handle_t* pam_handle;

  if(pam_start(service, user, &conv, &pam_handle) != PAM_SUCCESS)
    return XLSH_ERROR;

  if(xlsh_X)
    pam_set_item(pam_handle, PAM_TTY, XLSH_XTTY);
  else
    pam_set_item(pam_handle, PAM_TTY, ttyname(0));

  if(pam_authenticate(pam_handle, 0) != PAM_SUCCESS) {
    pam_end(pam_handle, 0);
    return XLSH_ERROR;
  }
  if(pam_acct_mgmt(pam_handle, 0) != PAM_SUCCESS) {
    pam_end(pam_handle, 0);
    return XLSH_ERROR;
  }
  if(pam_setcred(pam_handle, PAM_ESTABLISH_CRED) != PAM_SUCCESS) {
    pam_end(pam_handle, 0);
    return XLSH_ERROR;
  }
  if(pam_open_session(pam_handle, 0) != PAM_SUCCESS) {
    pam_setcred(pam_handle, PAM_DELETE_CRED);
    pam_end(pam_handle, 0);
    return XLSH_ERROR;
  }

  *handle = pam_handle;
  return XLSH_EOK;
}
开发者ID:drwilly，项目名称:xlsh，代码行数:35，代码来源:xlsh.c


示例2: do_pam_setcred

void
do_pam_setcred(int init)
{
	sshpam_err = pam_set_item(sshpam_handle, PAM_CONV,
	    (const void *)&store_conv);
	if (sshpam_err != PAM_SUCCESS)
		fatal("PAM: failed to set PAM_CONV: %s",
		    pam_strerror(sshpam_handle, sshpam_err));
	if (init) {
		debug("PAM: establishing credentials");
		sshpam_err = pam_setcred(sshpam_handle, PAM_ESTABLISH_CRED);
	} else {
		debug("PAM: reinitializing credentials");
		sshpam_err = pam_setcred(sshpam_handle, PAM_REINITIALIZE_CRED);
	}
	if (sshpam_err == PAM_SUCCESS) {
		sshpam_cred_established = 1;
		return;
	}
	if (sshpam_authenticated)
		fatal("PAM: pam_setcred(): %s",
		    pam_strerror(sshpam_handle, sshpam_err));
	else
		debug("PAM: pam_setcred(): %s",
		    pam_strerror(sshpam_handle, sshpam_err));
}
开发者ID:Alkzndr，项目名称:freebsd，代码行数:26，代码来源:auth-pam.c


示例3: sftppam_exit_ev

static void sftppam_exit_ev(const void *event_data, void *user_data) {

  /* Close the PAM session */

  if (sftppam_pamh != NULL) {
    int res;

#ifdef PAM_CRED_DELETE
    res = pam_setcred(sftppam_pamh, PAM_CRED_DELETE);
#else
    res = pam_setcred(sftppam_pamh, PAM_DELETE_CRED);
#endif
    if (res != PAM_SUCCESS) {
      pr_trace_msg(trace_channel, 9, "PAM error setting PAM_DELETE_CRED: %s",
        pam_strerror(sftppam_pamh, res));
    }

    res = pam_close_session(sftppam_pamh, PAM_SILENT);
    pam_end(sftppam_pamh, res);
    sftppam_pamh = NULL;
  }

  if (sftppam_user != NULL) {
    free(sftppam_user);
    sftppam_user = NULL;
    sftppam_userlen = 0;
  }
}
开发者ID:jmaggard10，项目名称:proftpd，代码行数:28，代码来源:mod_sftp_pam.c


示例4: switch

void Authenticator::close_session(void) {
    switch((last_result=pam_close_session(pam_handle, 0))) {
    // The documentation and implementation of Linux PAM differs:
    // PAM_SESSION_ERROR is described in the documentation but
    // don't exists in the actual implementation. This issue needs
    // to be fixes at some point.

    default:
        //case PAM_SESSION_ERROR:
        pam_setcred(pam_handle, PAM_DELETE_CRED);
        _end();
        throw Exception(pam_handle, "pam_close_session", last_result);

    case PAM_SUCCESS:
        break;
    };
    switch((last_result=pam_setcred(pam_handle, PAM_DELETE_CRED))) {
    default:
    case PAM_CRED_ERR:
    case PAM_CRED_UNAVAIL:
    case PAM_CRED_EXPIRED:
    case PAM_USER_UNKNOWN:
        _end();
        throw Exception(pam_handle, "pam_setcred()", last_result);

    case PAM_SUCCESS:
        break;
    }
    return;
}
开发者ID:JackDanger，项目名称:chromiumos，代码行数:30，代码来源:PAM.cpp


示例5: run_test_case

static enum pamtest_err run_test_case(pam_handle_t *ph,
				      struct pam_testcase *tc)
{
	switch (tc->pam_operation) {
	case PAMTEST_AUTHENTICATE:
		tc->op_rv = pam_authenticate(ph, tc->flags);
		return PAMTEST_ERR_OK;
	case PAMTEST_SETCRED:
		tc->op_rv = pam_setcred(ph, tc->flags);
		return PAMTEST_ERR_OK;
	case PAMTEST_ACCOUNT:
		tc->op_rv = pam_acct_mgmt(ph, tc->flags);
		return PAMTEST_ERR_OK;
	case PAMTEST_OPEN_SESSION:
		tc->op_rv = pam_open_session(ph, tc->flags);
		return PAMTEST_ERR_OK;
	case PAMTEST_CLOSE_SESSION:
		tc->op_rv = pam_close_session(ph, tc->flags);
		return PAMTEST_ERR_OK;
	case PAMTEST_CHAUTHTOK:
		tc->op_rv = pam_chauthtok(ph, tc->flags);
		return PAMTEST_ERR_OK;
	case PAMTEST_GETENVLIST:
		tc->case_out.envlist = pam_getenvlist(ph);
		return PAMTEST_ERR_OK;
	case PAMTEST_KEEPHANDLE:
		tc->case_out.ph = ph;
		return PAMTEST_ERR_KEEPHANDLE;
	default:
		return PAMTEST_ERR_OP;
	}

	return PAMTEST_ERR_OP;
}
开发者ID:encukou，项目名称:samba，代码行数:34，代码来源:libpamtest.c


示例6: pam_setcred

 bool PamHandle::setCred(int flags) {
     m_result = pam_setcred(m_handle, flags | m_silent);
     if (m_result != PAM_SUCCESS) {
         qWarning() << "[PAM] setCred:" << pam_strerror(m_handle, m_result);
     }
     return m_result == PAM_SUCCESS;
 }
开发者ID:Acidburn0zzz，项目名称:sddm-1，代码行数:7，代码来源:PamHandle.cpp


示例7: SessionExit

void SessionExit(struct display *d, int status, int removeAuth)
{
#ifdef USE_PAM
	pam_handle_t *pamh = thepamh();
	if (pamh) {
		/* shutdown PAM session */
		if (pam_setcred(pamh, PAM_DELETE_CRED) != PAM_SUCCESS)
			WDMError("pam_setcred(DELETE_CRED) failed, errno=%d", errno);
		pam_close_session(pamh, 0);
		pam_end(pamh, PAM_SUCCESS);
		pamh = NULL;
	}
#endif

	/* make sure the server gets reset after the session is over */
	if (d->serverPid >= 2 && d->resetSignal)
		kill(d->serverPid, d->resetSignal);
	else
		ResetServer(d);
	if (removeAuth) {
		setgid(verify.gid);
		setuid(verify.uid);
		RemoveUserAuthorization(d, &verify);
	}
	WDMDebug("Display %s exiting with status %d\n", d->name, status);
	exit(status);
}
开发者ID:bbidulock，项目名称:wdm，代码行数:27，代码来源:session.c


示例8: auth

static int auth(const char *password) {
    pam_handle_t* pamh; 
    struct passwd *pw;
    if ((pw = getpwuid(getuid())) == NULL)
        return 0;

    struct pam_response * reply = malloc(sizeof(struct pam_response));
    if (!reply)
        return 0;

    struct pam_conv pamc = { conversation, reply };
    int rc = 0;

    reply->resp = strdup(password);
    reply->resp_retcode = 0; 
    pam_start("slock", pw->pw_name, &pamc, &pamh);
    if (pam_set_item(pamh, PAM_AUTHTOK, password) == PAM_SUCCESS        &&
        pam_authenticate(pamh,PAM_DISALLOW_NULL_AUTHTOK) == PAM_SUCCESS &&
        pam_acct_mgmt(pamh, 0) == PAM_SUCCESS                           &&
        pam_setcred(pamh, PAM_REFRESH_CRED) == PAM_SUCCESS) {
           rc = 1;
    }
    pam_end(pamh,0);
    return rc;
}
开发者ID:jackdoe，项目名称:slock，代码行数:25，代码来源:slock.c


示例9: pam_finish

void
pam_finish ()
{
        int             rc = 0;

	/* 
	 * Allow PAM to clean up its state by closing the user session and
	 * ending the association with PAM.
	 */

	if (!conf->use_pam)
		return;

        if (pam_h != NULL) {
		/*
		 * Log any errors, but there's no need to return a SLURM error.
		 */
                if ((rc = pam_close_session (pam_h, 0)) != PAM_SUCCESS) {
                        error("pam_close_session: %s", pam_strerror(pam_h, rc));
                }
                if ((rc = pam_setcred (pam_h, PAM_DELETE_CRED)) != PAM_SUCCESS){
                        error("pam_setcred DELETE: %s", pam_strerror(pam_h,rc));
                }
                if ((rc = pam_end (pam_h, rc)) != PAM_SUCCESS) {
                        error("pam_end: %s", pam_strerror(NULL, rc));
                }
                pam_h = NULL;
        }
}
开发者ID:HDOD，项目名称:slurm，代码行数:29，代码来源:pam_ses.c


示例10: init_groups

static void
init_groups (const struct passwd* pw, gid_t* groups, int num_groups) {
    int retval;

    errno = 0;

    if (num_groups) {
        retval = setgroups (num_groups, groups);
    } else {
        retval = initgroups (pw->pw_name, pw->pw_gid);
    }

    if (retval == -1) {
        cleanup_pam (PAM_ABORT);
        err (EXIT_FAILURE, _("cannot set groups"));
    }
    endgrent ();

    retval = pam_setcred (pamh, PAM_ESTABLISH_CRED);
    if (is_pam_failure(retval)) {
        errx (EXIT_FAILURE, "%s", pam_strerror (pamh, retval));
    } else {
        _pam_cred_established = 1;
    }
}
开发者ID:TheNeikos，项目名称:bughack，代码行数:25，代码来源:su-common.2.27.1-1.modified.c


示例11: mc_pam_auth

/* Return 0 if authentication failed, 1 otherwise */
static int
mc_pam_auth (const char *username, const char *password)
{
    pam_handle_t *pamh;
    struct user_pass up;
    int status;

    up.username = username;
    up.password = password;
    conv.appdata_ptr = &up;

    if ((status =
	 pam_start ("mcserv", username, &conv, &pamh)) != PAM_SUCCESS)
	goto failed_pam;
    if ((status = pam_authenticate (pamh, 0)) != PAM_SUCCESS)
	goto failed_pam;
    if ((status = pam_acct_mgmt (pamh, 0)) != PAM_SUCCESS)
	goto failed_pam;
    if ((status = pam_setcred (pamh, PAM_ESTABLISH_CRED)) != PAM_SUCCESS)
	goto failed_pam;
    pam_end (pamh, status);
    return 0;

  failed_pam:
    pam_end (pamh, status);
    return 1;
}
开发者ID:sfionov，项目名称:mc-dev，代码行数:28，代码来源:mcserv.c


示例12: do_pam_cleanup_proc

/* Called at exit to cleanly shutdown PAM */
static void
do_pam_cleanup_proc(void *context)
{
	int pam_retval;
	pam_stuff *pam = (pam_stuff *) context;

	if (pam == NULL)
		return;

	if (pam->authctxt != NULL && pam->authctxt->pam == pam) {
		pam->authctxt->pam_retval = pam->last_pam_retval;
		pam->authctxt->pam = NULL;
		pam->authctxt = NULL;
	}

	if (pam->h == NULL)
		return;

	/*
	 * We're in fatal_cleanup() or not in userauth or without a
	 * channel -- can't converse now, too bad.
	 */
	pam_retval = pam_set_item(pam->h, PAM_CONV, NULL);
	if (pam_retval != PAM_SUCCESS) {
		log("Cannot remove PAM conv, close session or delete creds[%d]: %.200s",
			pam_retval, PAM_STRERROR(pam->h, pam_retval));
		goto cleanup;
	}

	if (pam->state & PAM_S_DONE_OPEN_SESSION) {
		pam_retval = pam_close_session(pam->h, 0);
		if (pam_retval != PAM_SUCCESS)
			log("Cannot close PAM session[%d]: %.200s",
			    pam_retval, PAM_STRERROR(pam->h, pam_retval));
	}

	if (pam->state & PAM_S_DONE_SETCRED) {
		pam_retval = pam_setcred(pam->h, PAM_DELETE_CRED);
		if (pam_retval != PAM_SUCCESS)
			debug("Cannot delete credentials[%d]: %.200s", 
			    pam_retval, PAM_STRERROR(pam->h, pam_retval));
	}

cleanup:

	/* Use the previous PAM result, if not PAM_SUCCESS for pam_end() */
	if (pam->last_pam_retval != PAM_SUCCESS)
		pam_retval = pam_end(pam->h, pam->last_pam_retval);
	else if (pam_retval != PAM_SUCCESS)
		pam_retval = pam_end(pam->h, pam_retval);
	else
		pam_retval = pam_end(pam->h, PAM_ABORT);

	if (pam_retval != PAM_SUCCESS)
		log("Cannot release PAM authentication[%d]: %.200s",
		    pam_retval, PAM_STRERROR(pam->h, pam_retval));

	xfree(pam);
}
开发者ID:andreiw，项目名称:polaris，代码行数:60，代码来源:auth-pam.c


示例13: checkpw_cleanup

static void checkpw_cleanup (pam_handle_t *hdl)
{
#if 0	/* see checkpw() for why this is #if 0 */
  pam_close_session (hdl,NIL);	/* close session [uw]tmp */
#endif
  pam_setcred (hdl,PAM_DELETE_CRED);
  pam_end (hdl,PAM_SUCCESS);
}
开发者ID:Distrotech，项目名称:pine，代码行数:8，代码来源:ckp_pam.c


示例14: mdm_verify_cleanup

void
mdm_verify_cleanup (MdmDisplay *d)
{
	gid_t groups[1] = { 0 };
	cur_mdm_disp = d;

	if (pamh != NULL) {
		gint pamerr;
		pam_handle_t *tmp_pamh;
		gboolean old_opened_session;
		gboolean old_did_setcred;

		mdm_debug ("Running mdm_verify_cleanup and pamh != NULL");

		mdm_sigterm_block_push ();
		mdm_sigchld_block_push ();
		tmp_pamh = pamh;
		pamh = NULL;
		old_opened_session = opened_session;
		opened_session = FALSE;
		old_did_setcred = did_setcred;
		did_setcred = FALSE;
		mdm_sigchld_block_pop ();
		mdm_sigterm_block_pop ();

		pamerr = PAM_SUCCESS;

		/* Close the users session */
		if (old_opened_session) {
			mdm_debug ("Running pam_close_session");
			pamerr = pam_close_session (tmp_pamh, 0);
		}

		/* Throw away the credentials */
		if (old_did_setcred) {
			mdm_debug ("Running pam_setcred with PAM_DELETE_CRED");
			pamerr = pam_setcred (tmp_pamh, PAM_DELETE_CRED);
		}

		pam_end (tmp_pamh, pamerr);

		/* Workaround to avoid mdm messages being logged as PAM_pwdb */
                mdm_log_shutdown ();
                mdm_log_init ();
	}

	/* Clear the group setup */
	setgid (0);
	/* this will get rid of any suplementary groups etc... */
	setgroups (1, groups);

	cur_mdm_disp = NULL;

	/* reset limits */
	mdm_reset_limits ();
}
开发者ID:ActusOS，项目名称:mdm，代码行数:56，代码来源:verify-pam.c


示例15: pam_setcred

int context::rmcred()
{
    int code = static_cast<int>(errc::success);
    if(_M_cred)
    {
        code = pam_setcred(_M_pamh, PAM_DELETE_CRED);
        _M_cred = false;
    }
    return code;
}
开发者ID:dimitry-ishenko，项目名称:camel，代码行数:10，代码来源:pam.cpp


示例16: pam_start

bool PAMAuthenticator::authenticate(void)
{
	pam_conv c;
	c.conv        = PAMAuthenticator::conv;
	c.appdata_ptr = this;

	int res = pam_start("repwatchproxy", 0, &c, &this->m_ph);
	if (res == PAM_SUCCESS) {
		res = pam_set_item(this->m_ph, PAM_RUSER, this->m_user.constData());
		if (res != PAM_SUCCESS) {
			goto getout;
		}

		res = pam_set_item(this->m_ph, PAM_RHOST, this->m_host.constData());
		if (res != PAM_SUCCESS) {
			goto getout;
		}

		res = pam_authenticate(this->m_ph, 0);
		if (res != PAM_SUCCESS) {
			goto getout;
		}

		res = pam_acct_mgmt(this->m_ph, 0);
		if (PAM_NEW_AUTHTOK_REQD == res) {
			res = pam_chauthtok(this->m_ph, PAM_CHANGE_EXPIRED_AUTHTOK);
		}

		if (res != PAM_SUCCESS) {
			goto getout;
		}

		res = pam_setcred(this->m_ph, PAM_ESTABLISH_CRED);
		if (res != PAM_SUCCESS) {
			goto getout;
		}

		res = pam_open_session(this->m_ph, 0);
		if (res != PAM_SUCCESS) {
			goto getout;
		}

		return true;

getout:
		qWarning("%s: %s", Q_FUNC_INFO, pam_strerror(this->m_ph, res));
		pam_end(this->m_ph, res);
	}
	else {
		qCritical("PAM initialization failed");
	}

	this->m_ph = 0;
	return false;
}
开发者ID:sjinks，项目名称:repwatch_proxy，代码行数:55，代码来源:pamauthenticator.cpp


示例17: xlsh_session_close

int xlsh_session_close(pam_handle_t* handle)
{
  pam_close_session(handle, 0);
  if(pam_setcred(handle, PAM_DELETE_CRED) != PAM_SUCCESS) {
    pam_end(handle, 0);
    return XLSH_ERROR;
  }

  pam_end(handle, 0);
  return XLSH_EOK;
}
开发者ID:drwilly，项目名称:xlsh，代码行数:11，代码来源:xlsh.c


示例18: pam_session_open

gboolean pam_session_open(void)
{
  g_pamLastStatus = pam_setcred(g_pamHandle, PAM_ESTABLISH_CRED);
  if (g_pamLastStatus != PAM_SUCCESS)
    {
      fprintf(stderr, "Jolicloud-DisplayManager: Unable to define pam credentials. Error %d\n",
	      g_pamLastStatus);
      return FALSE;
    }

  g_pamLastStatus = pam_open_session(g_pamHandle, 0);
  if (g_pamLastStatus != PAM_SUCCESS)
    {
      fprintf(stderr, "Jolicloud-DisplayManager: Unable to open session with pan. Error %d\n",
	      g_pamLastStatus);
      pam_setcred(g_pamHandle, PAM_DELETE_CRED);
      return FALSE;
    }

  return TRUE;
}
开发者ID:AlfredArouna，项目名称:jolicloud-displaymanager，代码行数:21，代码来源:pam.c


示例19: loginpam_session

/*
 * Note that the position of the pam_setcred() call is discussable:
 *
 *  - the PAM docs recommend pam_setcred() before pam_open_session()
 *  - but the original RFC http://www.opengroup.org/rfc/mirror-rfc/rfc86.0.txt
 *    uses pam_setcred() after pam_open_session()
 *
 * The old login versions (before year 2011) followed the RFC. This is probably
 * not optimal, because there could be a dependence between some session modules
 * and the user's credentials.
 *
 * The best is probably to follow openssh and call pam_setcred() before and
 * after pam_open_session().                -- [email protected] (18-Nov-2011)
 *
 */
static void loginpam_session(struct login_context *cxt)
{
	int rc;
	pam_handle_t *pamh = cxt->pamh;

	rc = pam_setcred(pamh, PAM_ESTABLISH_CRED);
	if (is_pam_failure(rc))
		loginpam_err(pamh, rc);

	rc = pam_open_session(pamh, 0);
	if (is_pam_failure(rc)) {
		pam_setcred(cxt->pamh, PAM_DELETE_CRED);
		loginpam_err(pamh, rc);
	}

	rc = pam_setcred(pamh, PAM_REINITIALIZE_CRED);
	if (is_pam_failure(rc)) {
		pam_close_session(pamh, 0);
		loginpam_err(pamh, rc);
	}
}
开发者ID:abrodkin，项目名称:util-linux，代码行数:36，代码来源:login.c


示例20: pam_setup

int
pam_setup (char *user, char *host)
{
	/*
	 * Any application using PAM must provide a conversion function, which
	 * is used for direct communication between a loaded module and the
	 * application. In this case, SLURM does need a communication mechanism,
	 * so the default (or null) conversation function may be used.
	 */
	struct pam_conv conv = {misc_conv, NULL};
        int             rc = 0;

	if (!conf->use_pam)
		return SLURM_SUCCESS;
	/*
	 * SLURM uses PAM to obtain resource limits established by the system
	 * administrator. PAM's session management library is responsible for
	 * handling resource limits. When a PAM session is opened on behalf of
	 * a user, the limits imposed by the sys admin are picked up. Opening
	 * a PAM session requires a PAM handle, which is obtained when the PAM
	 * interface is initialized. (PAM handles are required with essentially
	 * all PAM calls.) It's also necessary to have the users PAM credentials
	 * to open a user session.
 	 */
        if ((rc = pam_start (SLURM_SERVICE_PAM, user, &conv, &pam_h))
			!= PAM_SUCCESS) {
                error ("pam_start: %s", pam_strerror(pam_h, rc));
                return SLURM_ERROR;
        } else if ((rc = pam_set_item (pam_h, PAM_USER, user))
			!= PAM_SUCCESS) {
                error ("pam_set_item USER: %s", pam_strerror(pam_h, rc));
                return SLURM_ERROR;
        } else if ((rc = pam_set_item (pam_h, PAM_RUSER, user))
			!= PAM_SUCCESS) {
                error ("pam_set_item RUSER: %s", pam_strerror(pam_h, rc));
                return SLURM_ERROR;
        } else if ((rc = pam_set_item (pam_h, PAM_RHOST, host))
			!= PAM_SUCCESS) {
                error ("pam_set_item HOST: %s", pam_strerror(pam_h, rc));
              return SLURM_ERROR;
        } else if ((rc = pam_setcred (pam_h, PAM_ESTABLISH_CRED))
			!= PAM_SUCCESS) {
                error ("pam_setcred: %s", pam_strerror(pam_h, rc));
                return SLURM_ERROR;
        } else if ((rc = pam_open_session (pam_h, 0)) != PAM_SUCCESS) {
                error("pam_open_session: %s", pam_strerror(pam_h, rc));
                return SLURM_ERROR;
        }

	return SLURM_SUCCESS;

}
开发者ID:IFCA，项目名称:slurm，代码行数:52，代码来源:pam_ses.c



注：本文中的pam_setcred函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ pam_start函数代码示例发布时间：2022-05-30
下一篇：
C++ pam_set_item函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap