本文整理汇总了C++中paircreate函数的典型用法代码示例。如果您正苦于以下问题:C++ paircreate函数的具体用法?C++ paircreate怎么用?C++ paircreate使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了paircreate函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: eap_sim_sendstart
static int eap_sim_sendstart(eap_handler_t *handler)
{
VALUE_PAIR **vps, *newvp;
uint16_t words[3];
eap_sim_state_t *ess;
RADIUS_PACKET *packet;
uint8_t *p;
rad_assert(handler->request != NULL);
rad_assert(handler->request->reply);
ess = (eap_sim_state_t *)handler->opaque;
/* these are the outgoing attributes */
packet = handler->request->reply;
vps = &packet->vps;
rad_assert(vps != NULL);
/*
* Add appropriate TLVs for the EAP things we wish to send.
*/
/* the version list. We support only version 1. */
words[0] = htons(sizeof(words[1]));
words[1] = htons(EAP_SIM_VERSION);
words[2] = 0;
newvp = paircreate(packet, PW_EAP_SIM_VERSION_LIST, 0);
pairmemcpy(newvp, (uint8_t const *) words, sizeof(words));
pairadd(vps, newvp);
/* set the EAP_ID - new value */
newvp = paircreate(packet, PW_EAP_ID, 0);
newvp->vp_integer = ess->sim_id++;
pairreplace(vps, newvp);
/* record it in the ess */
ess->keys.versionlistlen = 2;
memcpy(ess->keys.versionlist, words + 1, ess->keys.versionlistlen);
/* the ANY_ID attribute. We do not support re-auth or pseudonym */
newvp = paircreate(packet, PW_EAP_SIM_FULLAUTH_ID_REQ, 0);
newvp->length = 2;
newvp->vp_octets = p = talloc_array(newvp, uint8_t, 2);
p[0] = 0;
p[0] = 1;
pairadd(vps, newvp);
/* the SUBTYPE, set to start. */
newvp = paircreate(packet, PW_EAP_SIM_SUBTYPE, 0);
newvp->vp_integer = EAPSIM_START;
pairreplace(vps, newvp);
return 1;
}
开发者ID:RockalotofPokadots,项目名称:freeradius-server,代码行数:58,代码来源:rlm_eap_sim.c
示例2: eap_sim_sendstart
static int eap_sim_sendstart(EAP_HANDLER *handler)
{
VALUE_PAIR **vps, *newvp;
uint16_t *words;
struct eap_sim_server_state *ess;
rad_assert(handler->request != NULL);
rad_assert(handler->request->reply);
ess = (struct eap_sim_server_state *)handler->opaque;
/* these are the outgoing attributes */
vps = &handler->request->reply->vps;
rad_assert(vps != NULL);
/*
* add appropriate TLVs for the EAP things we wish to send.
*/
/* the version list. We support only version 1. */
newvp = paircreate(ATTRIBUTE_EAP_SIM_BASE+PW_EAP_SIM_VERSION_LIST, 0,
PW_TYPE_OCTETS);
words = (uint16_t *)newvp->vp_strvalue;
newvp->length = 3*sizeof(uint16_t);
words[0] = htons(1*sizeof(uint16_t));
words[1] = htons(EAP_SIM_VERSION);
words[2] = 0;
pairadd(vps, newvp);
/* set the EAP_ID - new value */
newvp = paircreate(ATTRIBUTE_EAP_ID, 0, PW_TYPE_INTEGER);
newvp->vp_integer = ess->sim_id++;
pairreplace(vps, newvp);
/* record it in the ess */
ess->keys.versionlistlen = 2;
memcpy(ess->keys.versionlist, words+1, ess->keys.versionlistlen);
/* the ANY_ID attribute. We do not support re-auth or pseudonym */
newvp = paircreate(ATTRIBUTE_EAP_SIM_BASE+PW_EAP_SIM_FULLAUTH_ID_REQ,
0, PW_TYPE_OCTETS);
newvp->length = 2;
newvp->vp_strvalue[0]=0;
newvp->vp_strvalue[0]=1;
pairadd(vps, newvp);
/* the SUBTYPE, set to start. */
newvp = paircreate(ATTRIBUTE_EAP_SIM_SUBTYPE, 0, PW_TYPE_INTEGER);
newvp->vp_integer = eapsim_start;
pairreplace(vps, newvp);
return 1;
}
开发者ID:FabioPedretti,项目名称:freeradius-server,代码行数:54,代码来源:rlm_eap_sim.c
示例3: module_failure_msg
/** Add a module failure message VALUE_PAIR to the request
*/
void module_failure_msg(REQUEST *request, char const *fmt, ...)
{
va_list ap;
char *p;
VALUE_PAIR *vp;
if (!fmt || !request->packet) {
va_start(ap, fmt);
va_end(ap);
return;
}
va_start(ap, fmt);
vp = paircreate(request->packet, PW_MODULE_FAILURE_MESSAGE, 0);
if (!vp) {
va_end(ap);
return;
}
p = talloc_vasprintf(vp, fmt, ap);
if (request->module && *request->module) {
pairsprintf(vp, "%s: %s", request->module, p);
} else {
pairsprintf(vp, "%s", p);
}
talloc_free(p);
pairadd(&request->packet->vps, vp);
}
开发者ID:accense,项目名称:freeradius-server,代码行数:31,代码来源:valuepair.c
示例4: paircreate
VALUE_PAIR *eap_packet2vp(RADIUS_PACKET *packet, const eap_packet_raw_t *eap)
{
int total, size;
const uint8_t *ptr;
VALUE_PAIR *head = NULL;
VALUE_PAIR **tail = &head;
VALUE_PAIR *vp;
total = eap->length[0] * 256 + eap->length[1];
ptr = (const uint8_t *) eap;
do {
size = total;
if (size > 253) size = 253;
vp = paircreate(packet, PW_EAP_MESSAGE, 0);
if (!vp) {
pairfree(&head);
return NULL;
}
memcpy(vp->vp_octets, ptr, size);
vp->length = size;
*tail = vp;
tail = &(vp->next);
ptr += size;
total -= size;
} while (total > 0);
return head;
}
开发者ID:lnovy,项目名称:freeradius-server,代码行数:33,代码来源:eapcommon.c
示例5: paircreate
VALUE_PAIR *eap_packet2vp(const eap_packet_t *packet)
{
int total, size;
const uint8_t *ptr;
VALUE_PAIR *head = NULL;
VALUE_PAIR **tail = &head;
VALUE_PAIR *vp;
total = packet->length[0] * 256 + packet->length[1];
ptr = (const uint8_t *) packet;
do {
size = total;
if (size > 253) size = 253;
vp = paircreate(PW_EAP_MESSAGE, PW_TYPE_OCTETS);
if (!vp) {
pairfree(&head);
return NULL;
}
memcpy(vp->vp_octets, ptr, size);
vp->length = size;
*tail = vp;
tail = &(vp->next);
ptr += size;
total -= size;
} while (total > 0);
return head;
}
开发者ID:qudreams,项目名称:libmyradclient,代码行数:33,代码来源:eapcommon.c
示例6: cache_merge
/*
* Merge a cached entry into a REQUEST.
*/
static void cache_merge(rlm_cache_t *inst, REQUEST *request,
rlm_cache_entry_t *c)
{
VALUE_PAIR *vp;
rad_assert(request != NULL);
rad_assert(c != NULL);
if (c->control) {
vp = paircopy(c->control);
pairmove(&request->config_items, &vp);
pairfree(&vp);
}
if (c->request && request->packet) {
vp = paircopy(c->request);
pairmove(&request->packet->vps, &vp);
pairfree(&vp);
}
if (c->reply && request->reply) {
vp = paircopy(c->reply);
pairmove(&request->reply->vps, &vp);
pairfree(&vp);
}
if (inst->stats) {
vp = paircreate(PW_CACHE_ENTRY_HITS, 0, PW_TYPE_INTEGER);
rad_assert(vp != NULL);
vp->vp_integer = c->hits;
pairadd(&request->packet->vps, vp);
}
}
开发者ID:rssh,项目名称:freeradius-server,代码行数:38,代码来源:rlm_cache.c
示例7: eap_req2vp
static int eap_req2vp(EAP_HANDLER *handler)
{
int encoded, total, size;
const uint8_t *ptr;
VALUE_PAIR *head = NULL;
VALUE_PAIR **tail = &head;
VALUE_PAIR *vp;
ptr = wpabuf_head(handler->server_ctx.eap_if->eapReqData);
encoded = total = wpabuf_len(handler->server_ctx.eap_if->eapReqData);
do {
size = total;
if (size > 253) size = 253;
vp = paircreate(PW_EAP_MESSAGE, PW_TYPE_OCTETS);
if (!vp) {
pairfree(&head);
return -1;
}
memcpy(vp->vp_octets, ptr, size);
vp->length = size;
*tail = vp;
tail = &(vp->next);
ptr += size;
total -= size;
} while (total > 0);
pairdelete(&handler->request->reply->vps, PW_EAP_MESSAGE, TAG_ANY);
pairadd(&handler->request->reply->vps, head);
return encoded;
}
开发者ID:FabioPedretti,项目名称:freeradius-server,代码行数:35,代码来源:rlm_eap2.c
示例8: eap_basic_compose
/*
* compose EAP reply packet in EAP-Message attr of RADIUS. If
* EAP exceeds 253, frame it in multiple EAP-Message attrs.
*/
int eap_basic_compose(RADIUS_PACKET *packet, eap_packet_t *reply)
{
VALUE_PAIR *vp;
eap_packet_raw_t *eap_packet;
int rcode;
if (eap_wireformat(reply) == EAP_INVALID) {
return RLM_MODULE_INVALID;
}
eap_packet = (eap_packet_raw_t *)reply->packet;
pairdelete(&(packet->vps), PW_EAP_MESSAGE, 0, TAG_ANY);
vp = eap_packet2vp(packet, eap_packet);
if (!vp) return RLM_MODULE_INVALID;
pairadd(&(packet->vps), vp);
/*
* EAP-Message is always associated with
* Message-Authenticator but not vice-versa.
*
* Don't add a Message-Authenticator if it's already
* there.
*/
vp = pairfind(packet->vps, PW_MESSAGE_AUTHENTICATOR, 0, TAG_ANY);
if (!vp) {
vp = paircreate(packet, PW_MESSAGE_AUTHENTICATOR, 0);
vp->vp_length = AUTH_VECTOR_LEN;
vp->vp_octets = talloc_zero_array(vp, uint8_t, vp->vp_length);
pairadd(&(packet->vps), vp);
}
/* Set request reply code, but only if it's not already set. */
rcode = RLM_MODULE_OK;
if (!packet->code) switch (reply->code) {
case PW_EAP_RESPONSE:
case PW_EAP_SUCCESS:
packet->code = PW_CODE_ACCESS_ACCEPT;
rcode = RLM_MODULE_HANDLED;
break;
case PW_EAP_FAILURE:
packet->code = PW_CODE_ACCESS_REJECT;
rcode = RLM_MODULE_REJECT;
break;
case PW_EAP_REQUEST:
packet->code = PW_CODE_ACCESS_CHALLENGE;
rcode = RLM_MODULE_HANDLED;
break;
default:
/* Should never enter here */
ERROR("rlm_eap: reply code %d is unknown, Rejecting the request.", reply->code);
packet->code = PW_CODE_ACCESS_REJECT;
break;
}
return rcode;
}
开发者ID:WilliamRen,项目名称:freeradius-server,代码行数:62,代码来源:eapcommon.c
示例9: mod_post_auth
static rlm_rcode_t mod_post_auth(UNUSED void * instance, REQUEST *request)
{
#ifdef WITH_DHCP
int rcode;
VALUE_PAIR *vp;
vp = pairfind(request->packet->vps, 43, DHCP_MAGIC_VENDOR, TAG_ANY);
if (vp) {
/*
* vendor-specific options contain
*
* vendor opt 220/0xdc - SoH payload, or null byte to probe, or string
* "NAP" to indicate server-side support for SoH in OFFERs
*
* vendor opt 222/0xde - SoH correlation ID as utf-16 string, yuck...
*/
uint8_t vopt, vlen, *data;
data = vp->vp_octets;
while (data < vp->vp_octets + vp->length) {
vopt = *data++;
vlen = *data++;
switch (vopt) {
case 220:
if (vlen <= 1) {
RDEBUG("SoH adding NAP marker to DHCP reply");
/* client probe; send "NAP" in the reply */
vp = paircreate(request->reply, 43, DHCP_MAGIC_VENDOR);
vp->vp_octets[0] = 220;
vp->vp_octets[1] = 3;
vp->vp_octets[4] = 'N';
vp->vp_octets[3] = 'A';
vp->vp_octets[2] = 'P';
vp->length = 5;
pairadd(&request->reply->vps, vp);
} else {
RDEBUG("SoH decoding NAP from DHCP request");
/* SoH payload */
rcode = soh_verify(request, data, vlen);
if (rcode < 0) {
return RLM_MODULE_FAIL;
}
}
break;
default:
/* nothing to do */
break;
}
data += vlen;
}
return RLM_MODULE_OK;
}
#endif
return RLM_MODULE_NOOP;
}
开发者ID:jcartermeru,项目名称:freeradius-server,代码行数:57,代码来源:rlm_soh.c
示例10: eap_basic_compose
/*
* compose EAP reply packet in EAP-Message attr of RADIUS. If
* EAP exceeds 253, frame it in multiple EAP-Message attrs.
*/
int eap_basic_compose(RADIUS_PACKET *packet, EAP_PACKET *reply)
{
VALUE_PAIR *vp;
eap_packet_t *eap_packet;
int rcode;
if (eap_wireformat(reply) == EAP_INVALID) {
return RLM_MODULE_INVALID;
}
eap_packet = (eap_packet_t *)reply->packet;
pairdelete(&(packet->vps), PW_EAP_MESSAGE);
vp = eap_packet2vp(eap_packet);
if (!vp) return RLM_MODULE_INVALID;
pairadd(&(packet->vps), vp);
/*
* EAP-Message is always associated with
* Message-Authenticator but not vice-versa.
*
* Don't add a Message-Authenticator if it's already
* there.
*/
vp = pairfind(packet->vps, PW_MESSAGE_AUTHENTICATOR);
if (!vp) {
vp = paircreate(PW_MESSAGE_AUTHENTICATOR, PW_TYPE_OCTETS);
memset(vp->vp_strvalue, 0, AUTH_VECTOR_LEN);
vp->length = AUTH_VECTOR_LEN;
pairadd(&(packet->vps), vp);
}
/* Set request reply code, but only if it's not already set. */
rcode = RLM_MODULE_OK;
if (!packet->code) switch(reply->code) {
case PW_EAP_RESPONSE:
case PW_EAP_SUCCESS:
packet->code = PW_AUTHENTICATION_ACK;
rcode = RLM_MODULE_HANDLED;
break;
case PW_EAP_FAILURE:
packet->code = PW_AUTHENTICATION_REJECT;
rcode = RLM_MODULE_REJECT;
break;
case PW_EAP_REQUEST:
packet->code = PW_ACCESS_CHALLENGE;
rcode = RLM_MODULE_HANDLED;
break;
default:
/* Should never enter here */
packet->code = PW_AUTHENTICATION_REJECT;
break;
}
return rcode;
}
开发者ID:qudreams,项目名称:libmyradclient,代码行数:60,代码来源:eapcommon.c
示例11: mschapv1_encode
static int mschapv1_encode(RADIUS_PACKET *packet, VALUE_PAIR **request,
char const *password)
{
unsigned int i;
uint8_t *p;
VALUE_PAIR *challenge, *response;
uint8_t nthash[16];
challenge = paircreate(packet, PW_MSCHAP_CHALLENGE, VENDORPEC_MICROSOFT);
if (!challenge) {
fprintf(stderr, "GOT IT %d!\n", __LINE__);
return 0;
}
pairadd(request, challenge);
challenge->length = 8;
challenge->vp_octets = p = talloc_array(challenge, uint8_t, challenge->length);
for (i = 0; i < challenge->length; i++) {
p[i] = fr_rand();
}
response = paircreate(packet, PW_MSCHAP_RESPONSE, VENDORPEC_MICROSOFT);
if (!response) {
fprintf(stderr, "GOT IT %d!\n", __LINE__);
return 0;
}
pairadd(request, response);
response->length = 50;
response->vp_octets = p = talloc_array(response, uint8_t, response->length);
memset(p, 0, response->length);
p[1] = 0x01; /* NT hash */
mschap_ntpwdhash(nthash, password);
smbdes_mschap(nthash, challenge->vp_octets,
p + 26);
return 1;
}
开发者ID:kelvinwcl,项目名称:freeradius-server,代码行数:40,代码来源:radclient.c
示例12: cache_merge
/*
* Merge a cached entry into a REQUEST.
*/
static void cache_merge(rlm_cache_t *inst, REQUEST *request,
rlm_cache_entry_t *c)
{
VALUE_PAIR *vp;
rad_assert(request != NULL);
rad_assert(c != NULL);
vp = pairfind(request->config_items, PW_CACHE_MERGE, 0, TAG_ANY);
if (vp && (vp->vp_integer == 0)) {
RDEBUG2("Told not to merge entry into request");
return;
}
if (c->control) {
RDEBUG2("Merging cached control list:");
rdebug_pair_list(2, request, c->control);
vp = paircopy(c->control);
pairmove(&request->config_items, &vp);
pairfree(&vp);
}
if (c->request && request->packet) {
RDEBUG2("Merging cached request list:");
rdebug_pair_list(2, request, c->request);
vp = paircopy(c->request);
pairmove(&request->packet->vps, &vp);
pairfree(&vp);
}
if (c->reply && request->reply) {
RDEBUG2("Merging cached reply list:");
rdebug_pair_list(2, request, c->reply);
vp = paircopy(c->reply);
pairmove(&request->reply->vps, &vp);
pairfree(&vp);
}
if (inst->stats) {
vp = paircreate(PW_CACHE_ENTRY_HITS, 0, PW_TYPE_INTEGER);
rad_assert(vp != NULL);
vp->vp_integer = c->hits;
pairadd(&request->packet->vps, vp);
}
}
开发者ID:alandekok,项目名称:freeradius-server,代码行数:53,代码来源:rlm_cache.c
示例13: mschapv1_encode
static int mschapv1_encode(VALUE_PAIR **request, const char *password)
{
unsigned int i;
VALUE_PAIR *challenge, *response;
uint8_t nthash[16];
challenge = paircreate(PW_MSCHAP_CHALLENGE, VENDORPEC_MICROSOFT, PW_TYPE_OCTETS);
if (!challenge) {
fprintf(stderr, "GOT IT %d!\n", __LINE__);
return 0;
}
pairadd(request, challenge);
challenge->length = 8;
for (i = 0; i < challenge->length; i++) {
challenge->vp_octets[i] = fr_rand();
}
response = paircreate(PW_MSCHAP_RESPONSE, VENDORPEC_MICROSOFT, PW_TYPE_OCTETS);
if (!response) {
fprintf(stderr, "GOT IT %d!\n", __LINE__);
return 0;
}
pairadd(request, response);
response->length = 50;
memset(response->vp_octets, 0, response->length);
response->vp_octets[1] = 0x01; /* NT hash */
mschap_ntpwdhash(nthash, password);
smbdes_mschap(nthash, challenge->vp_octets,
response->vp_octets + 26);
return 1;
}
开发者ID:rssh,项目名称:freeradius-server,代码行数:36,代码来源:radclient.c
示例14: paircreate
/** Create a pair and add it to a particular list of VPs
*
* Note that this function ALWAYS returns. If we're OOM, then it causes the
* server to exit!
*/
VALUE_PAIR *radius_paircreate(UNUSED REQUEST *request, VALUE_PAIR **vps,
unsigned int attribute, unsigned int vendor, int type)
{
VALUE_PAIR *vp;
vp = paircreate(attribute, vendor, type);
if (!vp) {
radlog(L_ERR, "No memory!");
rad_assert("No memory" == NULL);
_exit(1);
}
if (vps) pairadd(vps, vp);
return vp;
}
开发者ID:anlaneg,项目名称:freeradius-server,代码行数:21,代码来源:valuepair.c
示例15: paircreate
/** Create a VALUE_PAIR and add it to a list of VALUE_PAIR s
*
* @note This function ALWAYS returns. If we're OOM, then it causes the
* @note server to exit, so you don't need to check the return value.
*
* @param[in] ctx Context to allocate VALUE_PAIRs in.
* @param[out] vps List to add new VALUE_PAIR to, if NULL will just
* return VALUE_PAIR.
* @param[in] attribute number.
* @param[in] vendor number.
* @return a new VLAUE_PAIR or causes server to exit on error.
*/
VALUE_PAIR *radius_paircreate(TALLOC_CTX *ctx, VALUE_PAIR **vps,
unsigned int attribute, unsigned int vendor)
{
VALUE_PAIR *vp;
vp = paircreate(ctx, attribute, vendor);
if (!vp) {
ERROR("No memory!");
rad_assert("No memory" == NULL);
fr_exit_now(1);
}
if (vps) pairadd(vps, vp);
return vp;
}
开发者ID:accense,项目名称:freeradius-server,代码行数:28,代码来源:valuepair.c
示例16: cache_merge
static void cache_merge(rlm_cache_t *inst, REQUEST *request, rlm_cache_entry_t *c)
{
VALUE_PAIR *vp;
vp_map_t *map;
vp = pairfind(request->config, PW_CACHE_MERGE, 0, TAG_ANY);
if (vp && (vp->vp_integer == 0)) {
RDEBUG2("Told not to merge entry into request");
return;
}
RDEBUG2("Merging cache entry into request");
RINDENT();
for (map = c->maps; map; map = map->next) {
/*
* The only reason that the application of a map entry
* can fail, is if the destination list or request
* isn't valid. For now we don't consider this fatal
* and continue merging the rest of the maps.
*/
if (map_to_request(request, map, map_to_vp, NULL) < 0) {
char buffer[1024];
map_prints(buffer, sizeof(buffer), map);
REXDENT();
RDEBUG("Skipping %s", buffer);
RINDENT();
continue;
}
}
REXDENT();
if (inst->stats) {
rad_assert(request->packet != NULL);
vp = pairfind(request->packet->vps, PW_CACHE_ENTRY_HITS, 0, TAG_ANY);
if (!vp) {
vp = paircreate(request->packet, PW_CACHE_ENTRY_HITS, 0);
rad_assert(vp != NULL);
pairadd(&request->packet->vps, vp);
}
vp->vp_integer = c->hits;
}
}
开发者ID:K1ngR1chard,项目名称:freeradius-server,代码行数:44,代码来源:rlm_cache.c
示例17: rad_postauth_reject
/*
* Before sending an Access-Reject, call the modules in the
* Post-Auth-Type REJECT stanza.
*/
static int rad_postauth_reject(REQUEST *request)
{
int result;
VALUE_PAIR *tmp;
DICT_VALUE *dval;
dval = dict_valbyname(PW_POST_AUTH_TYPE, "REJECT");
if (dval) {
/* Overwrite the Post-Auth-Type with the value REJECT */
pairdelete(&request->config_items, PW_POST_AUTH_TYPE);
tmp = paircreate(PW_POST_AUTH_TYPE, PW_TYPE_INTEGER);
tmp->lvalue = dval->value;
pairadd(&request->config_items, tmp);
result = rad_postauth(request);
} else {
/* No REJECT stanza */
result = RLM_MODULE_OK;
}
return result;
}
开发者ID:SunshineAllWay,项目名称:CPAchecker,代码行数:24,代码来源:auth.c
示例18: CC_HINT
/*
* Merge a cached entry into a REQUEST.
*/
static void CC_HINT(nonnull) cache_merge(rlm_cache_t *inst, REQUEST *request, rlm_cache_entry_t *c)
{
VALUE_PAIR *vp;
vp = pairfind(request->config_items, PW_CACHE_MERGE, 0, TAG_ANY);
if (vp && (vp->vp_integer == 0)) {
RDEBUG2("Told not to merge entry into request");
return;
}
if (c->control) {
RDEBUG2("Merging cached control list");
rdebug_pair_list(L_DBG_LVL_2, request, c->control);
pairadd(&request->config_items, paircopy(request, c->control));
}
if (c->packet && request->packet) {
RDEBUG2("Merging cached request list");
rdebug_pair_list(L_DBG_LVL_2, request, c->packet);
pairadd(&request->packet->vps,
paircopy(request->packet, c->packet));
}
if (c->reply && request->reply) {
RDEBUG2("Merging cached reply list");
rdebug_pair_list(L_DBG_LVL_2, request, c->reply);
pairadd(&request->reply->vps,
paircopy(request->reply, c->reply));
}
if (inst->stats) {
vp = paircreate(request->packet, PW_CACHE_ENTRY_HITS, 0);
rad_assert(vp != NULL);
vp->vp_integer = c->hits;
pairadd(&request->packet->vps, vp);
}
}
开发者ID:jrouzierinverse,项目名称:freeradius-server,代码行数:44,代码来源:rlm_cache.c
示例19: mypairappend
/*
* Copy the specified attribute to the specified list
*/
static void mypairappend(VALUE_PAIR *item, VALUE_PAIR **to)
{
VALUE_PAIR *tmp;
tmp = paircreate(item->attribute, item->type);
if( tmp == NULL ) {
radlog(L_ERR|L_CONS, "no memory");
exit(1);
}
switch (tmp->type) {
case PW_TYPE_INTEGER:
case PW_TYPE_IPADDR:
case PW_TYPE_DATE:
tmp->lvalue = item->lvalue;
break;
default:
memcpy((char *)tmp->strvalue, (char *)item->strvalue, item->length);
tmp->length = item->length;
break;
}
pairadd(to, tmp);
}
开发者ID:kubuqi,项目名称:802.1x-supplicant,代码行数:25,代码来源:rlm_attr_filter.c
示例20: eap_sim_sendsuccess
/*
* this code sends the success message.
*
* the only work to be done is the add the appropriate SEND/RECV
* radius attributes derived from the MSK.
*
*/
static int eap_sim_sendsuccess(EAP_HANDLER *handler)
{
unsigned char *p;
struct eap_sim_server_state *ess;
VALUE_PAIR **outvps;
VALUE_PAIR *newvp;
/* outvps is the data to the client. */
outvps= &handler->request->reply->vps;
ess = (struct eap_sim_server_state *)handler->opaque;
/* set the EAP_ID - new value */
newvp = paircreate(ATTRIBUTE_EAP_ID, 0, PW_TYPE_INTEGER);
newvp->vp_integer = ess->sim_id++;
pairreplace(outvps, newvp);
p = ess->keys.msk;
add_reply(outvps, "MS-MPPE-Recv-Key", p, EAPTLS_MPPE_KEY_LEN);
p += EAPTLS_MPPE_KEY_LEN;
add_reply(outvps, "MS-MPPE-Send-Key", p, EAPTLS_MPPE_KEY_LEN);
return 1;
}
开发者ID:FabioPedretti,项目名称:freeradius-server,代码行数:29,代码来源:rlm_eap_sim.c
注:本文中的paircreate函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论