C++ paint_util_set_general_support_height函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中paint_util_set_general_support_height函数的典型用法代码示例。如果您正苦于以下问题：C++ paint_util_set_general_support_height函数的具体用法？C++ paint_util_set_general_support_height怎么用？C++ paint_util_set_general_support_height使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了paint_util_set_general_support_height函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: paint_roto_drop_base

/** rct2: 0x00886194 */
static void paint_roto_drop_base(uint8 rideIndex, uint8 trackSequence, uint8 direction, int height, rct_map_element * mapElement)
{
	trackSequence = track_map_3x3[direction][trackSequence];

	int edges = edges_3x3[trackSequence];
	rct_ride * ride = get_ride(rideIndex);
	rct_xy16 position = {gPaintMapPosition.x, gPaintMapPosition.y};

	wooden_a_supports_paint_setup((direction & 1), 0, height, gTrackColours[SCHEME_MISC], NULL);

	uint32 imageId = SPR_FLOOR_METAL_B | gTrackColours[SCHEME_SUPPORTS];
	sub_98197C(imageId, 0, 0, 32, 32, 1, height, 0, 0, height, get_current_rotation());

	track_paint_util_paint_fences(edges, position, mapElement, ride, gTrackColours[SCHEME_TRACK], height, fenceSpritesMetalB, get_current_rotation());

	if (trackSequence == 0) {
		imageId = (direction & 1 ? SPR_ROTO_DROP_TOWER_BASE_90_DEG : SPR_ROTO_DROP_TOWER_BASE) | gTrackColours[SCHEME_TRACK];
		sub_98197C(imageId, 0, 0, 2, 2, 27, height, 8, 8, height + 3, get_current_rotation());

		imageId = (direction & 1 ? SPR_ROTO_DROP_TOWER_BASE_SEGMENT_90_DEG : SPR_ROTO_DROP_TOWER_BASE_SEGMENT) | gTrackColours[SCHEME_TRACK];
		sub_98197C(imageId, 0, 0, 2, 2, 30, height + 32, 8, 8, height + 32, get_current_rotation());

		imageId = (direction & 1 ? SPR_ROTO_DROP_TOWER_BASE_SEGMENT_90_DEG : SPR_ROTO_DROP_TOWER_BASE_SEGMENT) | gTrackColours[SCHEME_TRACK];
		sub_98197C(imageId, 0, 0, 2, 2, 30, height + 64, 8, 8, height + 64, get_current_rotation());

		paint_util_set_vertical_tunnel(height + 96);
		paint_util_set_segment_support_height(SEGMENTS_ALL, 0xFFFF, 0);

#ifdef __TESTPAINT__
		paint_util_set_general_support_height(height + 32, 0x20);
#else
		paint_util_set_general_support_height(height + 96, 0x20);
#endif

		return;
	}

	int blockedSegments = 0;
	switch (trackSequence) {
		case 1: blockedSegments = SEGMENT_B8 | SEGMENT_C8 | SEGMENT_B4 | SEGMENT_CC | SEGMENT_BC; break;
		case 2: blockedSegments = SEGMENT_B4 | SEGMENT_CC | SEGMENT_BC; break;
		case 3: blockedSegments = SEGMENT_B4 | SEGMENT_CC | SEGMENT_BC | SEGMENT_D4 | SEGMENT_C0; break;
		case 4: blockedSegments = SEGMENT_B4 | SEGMENT_C8 | SEGMENT_B8; break;
		case 5: blockedSegments = SEGMENT_BC | SEGMENT_D4 | SEGMENT_C0; break;
		case 6: blockedSegments = SEGMENT_B4 | SEGMENT_C8 | SEGMENT_B8 | SEGMENT_D0 | SEGMENT_C0; break;
		case 7: blockedSegments = SEGMENT_B8 | SEGMENT_D0 | SEGMENT_C0 | SEGMENT_D4 | SEGMENT_BC; break;
		case 8: blockedSegments = SEGMENT_B8 | SEGMENT_D0 | SEGMENT_C0; break;
	}
	paint_util_set_segment_support_height(blockedSegments, 0xFFFF, 0);
	paint_util_set_segment_support_height(SEGMENTS_ALL & ~blockedSegments, height + 2, 0x20);
	paint_util_set_general_support_height(height + 32, 0x20);
}

开发者ID:YJSoft，项目名称:OpenRCT2，代码行数:53，代码来源:roto_drop.c

示例2: paint_ghost_train_track_25_deg_up_to_flat_shared

static void paint_ghost_train_track_25_deg_up_to_flat_shared(uint8 rideIndex, uint8 trackSequence, uint8 direction, sint32 height, rct_map_element * mapElement)
{
    rct_xy16 position = {gPaintMapPosition.x, gPaintMapPosition.y};

    uint32 imageId = ghost_train_track_pieces_25_deg_up_to_flat[direction][0] | gTrackColours[SCHEME_TRACK];
    if (direction == 0 || direction == 2) {
        sub_98197C(imageId, 0, 0, 32, 20, 3, height, 0, 6, height, get_current_rotation());
    } else {
        sub_98197C(imageId, 0, 0, 20, 32, 3, height, 6, 0, height, get_current_rotation());
    }

    imageId = ghost_train_track_pieces_25_deg_up_to_flat[direction][1] | gTrackColours[SCHEME_TRACK];
    if (direction == 0 || direction == 2) {
        sub_98197C(imageId, 0, 0, 32, 1, 15, height, 0, 27, height, get_current_rotation());
    } else {
        sub_98197C(imageId, 0, 0, 1, 32, 15, height, 27, 0, height, get_current_rotation());
    }

    if (track_paint_util_should_paint_supports(position)) {
        metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 4, 6, height, gTrackColours[SCHEME_SUPPORTS]);
    }

    paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC, direction), 0xFFFF, 0);
    paint_util_set_general_support_height(height + 40, 0x20);
}

开发者ID:trigger-death，项目名称:OpenRCT2，代码行数:25，代码来源:ghost_train.c

示例3: paint_ghost_train_track_brakes

/** rct2: 0x00770CDC */
static void paint_ghost_train_track_brakes(uint8 rideIndex, uint8 trackSequence, uint8 direction, sint32 height, rct_map_element * mapElement)
{
    rct_xy16 position = {gPaintMapPosition.x, gPaintMapPosition.y};

    uint32 imageId = ghost_train_track_pieces_brakes[direction] | gTrackColours[SCHEME_TRACK];

    if (direction == 0 || direction == 2) {
        sub_98197C(imageId, 0, 0, 32, 20, 3, height, 0, 6, height, get_current_rotation());
    } else {
        sub_98197C(imageId, 0, 0, 20, 32, 3, height, 6, 0, height, get_current_rotation());
    }

    if (direction == 0 || direction == 2) {
        paint_util_push_tunnel_left(height, TUNNEL_0);
    } else {
        paint_util_push_tunnel_right(height, TUNNEL_0);
    }

    if (track_paint_util_should_paint_supports(position)) {
        metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 4, 0, height, gTrackColours[SCHEME_SUPPORTS]);
    }

    paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC, direction), 0xFFFF, 0);
    paint_util_set_general_support_height(height + 32, 0x20);
}

开发者ID:trigger-death，项目名称:OpenRCT2，代码行数:26，代码来源:ghost_train.c

示例4: inverted_impulse_rc_track_station

/** rct2: 0x008B0470, 0x008B0480, 0x008B0490 */
static void inverted_impulse_rc_track_station(
    paint_session* session, ride_id_t rideIndex, [[maybe_unused]] uint8_t trackSequence, uint8_t direction, int32_t height,
    const TileElement* tileElement)
{
    static constexpr const uint32_t imageIds[4][3] = {
        { SPR_STATION_BASE_C_SW_NE, 19662, SPR_STATION_INVERTED_BAR_B_SW_NE },
        { SPR_STATION_BASE_C_NW_SE, 19663, SPR_STATION_INVERTED_BAR_B_NW_SE },
        { SPR_STATION_BASE_C_SW_NE, 19662, SPR_STATION_INVERTED_BAR_B_SW_NE },
        { SPR_STATION_BASE_C_NW_SE, 19663, SPR_STATION_INVERTED_BAR_B_NW_SE },
    };

    sub_98197C_rotated(
        session, direction, imageIds[direction][0] | session->TrackColours[SCHEME_MISC], 0, 0, 32, 28, 1, height, 0, 2, height);
    sub_98197C_rotated(
        session, direction, imageIds[direction][1] | session->TrackColours[SCHEME_TRACK], 0, 0, 32, 20, 3, height + 29, 0, 6,
        height + 29);
    sub_98199C_rotated(
        session, direction, imageIds[direction][2] | session->TrackColours[SCHEME_SUPPORTS], 0, 6, 32, 20, 3, height + 29, 0, 6,
        height + 29);
    track_paint_util_draw_station_metal_supports_2(session, direction, height, session->TrackColours[SCHEME_SUPPORTS], 11);
    track_paint_util_draw_station_inverted(session, rideIndex, direction, height, tileElement, STATION_VARIANT_TALL);
    paint_util_push_tunnel_rotated(session, direction, height, TUNNEL_9);
    paint_util_set_segment_support_height(session, SEGMENTS_ALL, 0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 48, 0x20);
}

开发者ID:OpenRCT2，项目名称:OpenRCT2，代码行数:26，代码来源:InvertedImpulseCoaster.cpp

示例5: wooden_wild_mouse_track_right_quarter_turn_3

static void wooden_wild_mouse_track_right_quarter_turn_3(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    static constexpr const sprite_bb imageIds[4][3] = {
        {
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_SW_SE_PART_0, { 0, 6, 0 }, { 0, 0, 0 }, { 32, 20, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_SW_SE_PART_1, { 16, 16, 0 }, { 0, 0, 0 }, { 16, 16, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_SW_SE_PART_2, { 6, 0, 0 }, { 0, 0, 0 }, { 20, 32, 1 } },
        },
        {
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_NW_SW_PART_0, { 6, 0, 0 }, { 0, 0, 0 }, { 20, 32, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_NW_SW_PART_1, { 16, 0, 0 }, { 0, 0, 0 }, { 16, 16, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_NW_SW_PART_2, { 0, 6, 0 }, { 0, 0, 0 }, { 32, 20, 1 } },
        },
        {
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_NE_NW_PART_0, { 0, 6, 0 }, { 0, 0, 0 }, { 32, 20, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_NE_NW_PART_1, { 0, 0, 0 }, { 0, 0, 0 }, { 16, 16, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_NE_NW_PART_2, { 6, 0, 0 }, { 0, 0, 0 }, { 20, 32, 1 } },
        },
        {
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_SE_NE_PART_0, { 6, 0, 0 }, { 0, 0, 0 }, { 20, 32, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_SE_NE_PART_1, { 0, 16, 0 }, { 0, 0, 0 }, { 16, 16, 1 } },
            { SPR_WOODEN_WILD_MOUSE_QUARTER_TURN_3_SE_NE_PART_2, { 0, 6, 0 }, { 0, 0, 0 }, { 32, 20, 1 } },
        }
    };
    static uint8 supportType[] = { 4, 5, 2, 3 };

    track_paint_util_right_quarter_turn_3_tiles_paint_4(
        session, height, direction, session->CurrentRotation, trackSequence, session->TrackColours[SCHEME_TRACK], imageIds);
    track_paint_util_right_quarter_turn_3_tiles_tunnel(session, height, direction, trackSequence, TUNNEL_0);

    switch (trackSequence)
    {
    case 0:
    case 3:
        wooden_a_supports_paint_setup(session, supportType[direction], 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);
        break;
    }

    sint32 blockedSegments = 0;
    switch (trackSequence)
    {
    case 0:
        blockedSegments = SEGMENTS_ALL;
        break;
    case 2:
        blockedSegments = SEGMENT_C0 | SEGMENT_C4 | SEGMENT_D0 | SEGMENT_D4;
        break;
    case 3:
        blockedSegments = SEGMENTS_ALL;
        break;
    }
    paint_util_set_segment_support_height(session, paint_util_rotate_segments(blockedSegments, direction), 0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Gymnasiast，项目名称:OpenRCT2，代码行数:60，代码来源:WoodenWildMouse.cpp

示例6: paint_mini_helicopters_track_flat

/** rct2: 0x0081F348 */
static void paint_mini_helicopters_track_flat(
    paint_session* session, ride_id_t rideIndex, uint8_t trackSequence, uint8_t direction, int32_t height,
    const TileElement* tileElement)
{
    LocationXY16 position = session->MapPosition;
    uint32_t imageId;

    if (direction & 1)
    {
        imageId = SPR_TRACK_SUBMARINE_RIDE_MINI_HELICOPTERS_FLAT_SE_NW | session->TrackColours[SCHEME_TRACK];
        sub_98197C(session, imageId, 0, 0, 20, 32, 3, height, 6, 0, height);
        paint_util_push_tunnel_right(session, height, TUNNEL_0);
    }
    else
    {
        imageId = SPR_TRACK_SUBMARINE_RIDE_MINI_HELICOPTERS_FLAT_NE_SW | session->TrackColours[SCHEME_TRACK];
        sub_98197C(session, imageId, 0, 0, 32, 20, 3, height, 0, 6, height);
        paint_util_push_tunnel_left(session, height, TUNNEL_0);
    }

    if (track_paint_util_should_paint_supports(position))
    {
        metal_a_supports_paint_setup(
            session, (direction & 1) ? METAL_SUPPORTS_STICK_ALT : METAL_SUPPORTS_STICK, 4, -1, height,
            session->TrackColours[SCHEME_SUPPORTS]);
    }

    paint_util_set_segment_support_height(
        session, paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC, direction), 0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:OpenRCT2，项目名称:OpenRCT2，代码行数:32，代码来源:MiniHelicopters.cpp

示例7: paint_monorail_track_25_deg_up_to_flat

/** rct2: 0x008AE1DC */
static void paint_monorail_track_25_deg_up_to_flat(uint8 rideIndex, uint8 trackSequence, uint8 direction, sint32 height, rct_map_element * mapElement)
{
    rct_xy16 position = {gPaintMapPosition.x, gPaintMapPosition.y};

    uint32 imageId = monorail_track_pieces_25_deg_up_to_flat[direction] | gTrackColours[SCHEME_TRACK];

    if (direction == 0 || direction == 2) {
        sub_98196C(imageId, 0, 6, 32, 20, 3, height, get_current_rotation());
    } else {
        sub_98196C(imageId, 6, 0, 20, 32, 3, height, get_current_rotation());
    }

    switch (direction) {
        case 0: paint_util_push_tunnel_left(height - 8, TUNNEL_6); break;
        case 1: paint_util_push_tunnel_right(height + 8, TUNNEL_14); break;
        case 2: paint_util_push_tunnel_left(height + 8, TUNNEL_14); break;
        case 3: paint_util_push_tunnel_right(height - 8, TUNNEL_6); break;
    }

    if (track_paint_util_should_paint_supports(position)) {
        metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 4, 6, height, gTrackColours[SCHEME_SUPPORTS]);
    }

    paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC, direction), 0xFFFF, 0);
    paint_util_set_general_support_height(height + 40, 0x20);
}

开发者ID:trigger-death，项目名称:OpenRCT2，代码行数:27，代码来源:monorail.c

示例8: paint_ghost_train_track_spinning_tunnel

/** rct2: 0x00770CCC */
static void paint_ghost_train_track_spinning_tunnel(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    uint32 imageId = ghost_train_track_pieces_spinning_tunnel_track[direction] | session->TrackColours[SCHEME_TRACK];

    if (direction == 0 || direction == 2)
    {
        sub_98197C(session, imageId, 0, 0, 28, 20, 3, height, 2, 6, height);
    }
    else
    {
        sub_98197C(session, imageId, 0, 0, 20, 28, 3, height, 6, 2, height);
    }

    track_paint_util_spinning_tunnel_paint(session, 3, height, direction);

    if (direction == 0 || direction == 2)
    {
        paint_util_push_tunnel_left(session, height, TUNNEL_0);
    }
    else
    {
        paint_util_push_tunnel_right(session, height, TUNNEL_0);
    }

    wooden_a_supports_paint_setup(session, (direction & 1), 0, height, session->TrackColours[SCHEME_MISC], nullptr);

    paint_util_set_segment_support_height(session, SEGMENTS_ALL, 0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Wirlie，项目名称:OpenRCT2，代码行数:36，代码来源:GhostTrain.cpp

示例9: paint_observation_tower_section

/** rct2: 0x0070DD7C */
static void paint_observation_tower_section(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    if (trackSequence == 1)
    {
        return;
    }

    uint32 imageId = SPR_OBSERVATION_TOWER_SEGMENT | session->TrackColours[SCHEME_TRACK];
    sub_98197C(session, imageId, 0, 0, 2, 2, 30, height, 8, 8, height);

    const rct_tile_element * nextTileElement = tileElement + 1;
    if (tileElement->IsLastForTile() || tileElement->clearance_height != nextTileElement->base_height)
    {
        imageId = SPR_OBSERVATION_TOWER_SEGMENT_TOP | session->TrackColours[SCHEME_TRACK];
        sub_98199C(session, imageId, 0, 0, 2, 2, 30, height, 8, 8, height);
    }

    paint_util_set_segment_support_height(session, SEGMENTS_ALL, 0xFFFF, 0);

    paint_util_set_vertical_tunnel(session, height + 32);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Wirlie，项目名称:OpenRCT2，代码行数:29，代码来源:ObservationTower.cpp

示例10: inverted_impulse_rc_track_flat

/** rct2: 0x008B0460 */
static void inverted_impulse_rc_track_flat(
    paint_session* session, ride_id_t rideIndex, uint8_t trackSequence, uint8_t direction, int32_t height,
    const TileElement* tileElement)
{
    switch (direction)
    {
        case 0:
        case 2:
            sub_98197C_rotated(
                session, direction, session->TrackColours[SCHEME_TRACK] | 19662, 0, 0, 32, 20, 3, height + 29, 0, 6,
                height + 29);
            break;
        case 1:
        case 3:
            sub_98197C_rotated(
                session, direction, session->TrackColours[SCHEME_TRACK] | 19663, 0, 0, 32, 20, 3, height + 29, 0, 6,
                height + 29);
            break;
    }

    paint_util_set_segment_support_height(
        session, paint_util_rotate_segments(SEGMENT_C4 | SEGMENT_CC | SEGMENT_D0, direction), 0xFFFF, 0);
    if (track_paint_util_should_paint_supports(session->MapPosition))
    {
        metal_a_supports_paint_setup(
            session, METAL_SUPPORTS_TUBES_INVERTED, 4, 0, height + 44, session->TrackColours[SCHEME_SUPPORTS]);
    }

    paint_util_push_tunnel_rotated(session, direction, height, TUNNEL_3);
    paint_util_set_general_support_height(session, height + 48, 0x20);
}

开发者ID:OpenRCT2，项目名称:OpenRCT2，代码行数:32，代码来源:InvertedImpulseCoaster.cpp

示例11: paint_virginia_reel_track_flat

/** rct2: 0x00811264 */
static void paint_virginia_reel_track_flat(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    const uint32 * sprites = virginia_reel_track_pieces_flat;
    if (track_element_is_lift_hill(tileElement))
    {
        sprites = virginia_reel_track_pieces_flat_lift_hill;
    }

    uint32 imageId = sprites[direction] | session->TrackColours[SCHEME_TRACK];
    if (direction & 1)
    {
        sub_98197C(session, imageId, 0, 0, 27, 32, 2, height, 2, 0, height);
        paint_util_push_tunnel_right(session, height, TUNNEL_6);
    }
    else
    {
        sub_98197C(session, imageId, 0, 0, 32, 27, 2, height, 0, 2, height);
        paint_util_push_tunnel_left(session, height, TUNNEL_6);
    }

    wooden_a_supports_paint_setup(session, (direction & 1), 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);

    paint_util_set_segment_support_height(session, SEGMENTS_ALL, 0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Gymnasiast，项目名称:OpenRCT2，代码行数:32，代码来源:VirginiaReel.cpp

示例12: paint_mini_helicopters_track_station

/** rct2: 0x */
static void paint_mini_helicopters_track_station(uint8 rideIndex, uint8 trackSequence, uint8 direction, sint32 height, rct_map_element * mapElement)
{
    uint32 imageId;

    if (direction == 0 || direction == 2) {
        imageId = SPR_STATION_BASE_B_SW_NE | gTrackColours[SCHEME_MISC];
        sub_98197C(imageId, 0, 0, 32, 28, 1, height - 2, 0, 2, height, get_current_rotation());

        imageId = SPR_TRACK_SUBMARINE_RIDE_MINI_HELICOPTERS_FLAT_NE_SW | gTrackColours[SCHEME_TRACK];
        sub_98199C(imageId, 0, 0, 32, 20, 1, height, 0, 0, height, get_current_rotation());

        metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 5, 0, height, gTrackColours[SCHEME_SUPPORTS]);
        metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 8, 0, height, gTrackColours[SCHEME_SUPPORTS]);
        paint_util_push_tunnel_left(height, TUNNEL_6);
    } else if (direction == 1 || direction == 3) {
        imageId = SPR_STATION_BASE_B_NW_SE | gTrackColours[SCHEME_MISC];
        sub_98197C(imageId, 0, 0, 28, 32, 1, height - 2, 2, 0, height, get_current_rotation());

        imageId = SPR_TRACK_SUBMARINE_RIDE_MINI_HELICOPTERS_FLAT_SE_NW | gTrackColours[SCHEME_TRACK];
        sub_98199C(imageId, 0, 0, 20, 32, 1, height, 0, 0, height, get_current_rotation());

        metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 6, 0, height, gTrackColours[SCHEME_SUPPORTS]);
        metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 7, 0, height, gTrackColours[SCHEME_SUPPORTS]);
        paint_util_push_tunnel_right(height, TUNNEL_6);
    }

    track_paint_util_draw_station(rideIndex, trackSequence, direction, height, mapElement);

    paint_util_set_segment_support_height(SEGMENTS_ALL, 0xFFFF, 0);
    paint_util_set_general_support_height(height + 32, 0x20);
}

开发者ID:trigger-death，项目名称:OpenRCT2，代码行数:32，代码来源:mini_helicopters.c

示例13: paint_virginia_reel_track_left_quarter_turn_3_tiles

/** rct2: 0x00811304 */
static void paint_virginia_reel_track_left_quarter_turn_3_tiles(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    track_paint_util_left_quarter_turn_3_tiles_paint(
        session, 2, height, direction, trackSequence, session->TrackColours[SCHEME_TRACK],
        virginia_reel_track_pieces_flat_quarter_turn_3_tiles, session->CurrentRotation);
    track_paint_util_left_quarter_turn_3_tiles_tunnel(session, height, TUNNEL_6, direction, trackSequence);

    switch (trackSequence)
    {
    case 2:
        paint_util_set_segment_support_height(
            session, paint_util_rotate_segments(SEGMENT_C8 | SEGMENT_C4 | SEGMENT_D0 | SEGMENT_B8, direction), 0xFFFF, 0);
        break;
    case 0:
    case 3:
        wooden_a_supports_paint_setup(session, virginia_reel_left_quarter_turn_supports[direction], 0, height,
                                      session->TrackColours[SCHEME_SUPPORTS], nullptr);
        paint_util_set_segment_support_height(session, paint_util_rotate_segments(SEGMENTS_ALL, direction), 0xFFFF, 0);
        break;
    }

    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Gymnasiast，项目名称:OpenRCT2，代码行数:30，代码来源:VirginiaReel.cpp

示例14: paint_virginia_reel_station

/** rct2: 0x008112D4, 0x008112E4, 0x008112F4 */
static void paint_virginia_reel_station(uint8 rideIndex, uint8 trackSequence, uint8 direction, int height, rct_map_element * mapElement)
{
	uint32 imageId;

	if (direction == 0 || direction == 2) {
		imageId = SPR_STATION_BASE_B_SW_NE | gTrackColours[SCHEME_MISC];
		sub_98197C(imageId, 0, 0, 32, 28, 2, height - 2, 0, 2, height, get_current_rotation());

		imageId = SPR_VIRGINIA_REEL_FLAT_SW_NE | gTrackColours[SCHEME_TRACK];
		sub_98199C(imageId, 0, 0, 32, 20, 2, height, 0, 0, height, get_current_rotation());

		paint_util_push_tunnel_left(height, TUNNEL_6);
	} else if (direction == 1 || direction == 3) {
		imageId = SPR_STATION_BASE_B_NW_SE | gTrackColours[SCHEME_MISC];
		sub_98197C(imageId, 0, 0, 28, 32, 2, height - 2, 2, 0, height, get_current_rotation());

		imageId = SPR_VIRGINIA_REEL_FLAT_NW_SE | gTrackColours[SCHEME_TRACK];
		sub_98199C(imageId, 0, 0, 20, 32, 2, height, 0, 0, height, get_current_rotation());

		paint_util_push_tunnel_right(height, TUNNEL_6);
	}

	wooden_a_supports_paint_setup((direction & 1), 0, height, gTrackColours[SCHEME_SUPPORTS], NULL);
	track_paint_util_draw_station(rideIndex, trackSequence, direction, height, mapElement);

	paint_util_set_segment_support_height(SEGMENTS_ALL, 0xFFFF, 0);
	paint_util_set_general_support_height(height + 32, 0x20);
}

开发者ID:YJSoft，项目名称:OpenRCT2，代码行数:29，代码来源:virginia_reel.c

示例15: submarine_ride_paint_track_flat

static void submarine_ride_paint_track_flat(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    LocationXY16 position    = session->MapPosition;
    sint32   heightLower = height - 16;
    uint32   imageId;

    if (direction & 1)
    {
        imageId = SPR_TRACK_SUBMARINE_RIDE_MINI_HELICOPTERS_FLAT_SE_NW | session->TrackColours[SCHEME_TRACK];
        sub_98197C(session, imageId, 0, 0, 20, 32, 3, heightLower, 6, 0, heightLower);
        paint_util_push_tunnel_right(session, heightLower, TUNNEL_0);
    }
    else
    {
        imageId = SPR_TRACK_SUBMARINE_RIDE_MINI_HELICOPTERS_FLAT_NE_SW | session->TrackColours[SCHEME_TRACK];
        sub_98197C(session, imageId, 0, 0, 32, 20, 3, heightLower, 0, 6, heightLower);
        paint_util_push_tunnel_left(session, heightLower, TUNNEL_0);
    }

    if (track_paint_util_should_paint_supports(position))
    {
        metal_a_supports_paint_setup(session, (direction & 1) ? METAL_SUPPORTS_STICK_ALT : METAL_SUPPORTS_STICK, 4, -1,
                                     heightLower, session->TrackColours[SCHEME_SUPPORTS]);
    }

    paint_util_set_segment_support_height(session, paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC, direction),
                                          0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 16, 0x20);
}

开发者ID:Gymnasiast，项目名称:OpenRCT2，代码行数:35，代码来源:SubmarineRide.cpp

示例16: paint_virginia_reel_track_left_quarter_turn_1_tile

/** rct2: 0x00811324 */
static void paint_virginia_reel_track_left_quarter_turn_1_tile(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    track_paint_util_left_quarter_turn_1_tile_paint(
        session, 2, height, 0, direction, session->TrackColours[SCHEME_TRACK],
        virginia_reel_track_pieces_flat_quarter_turn_1_tile, session->CurrentRotation);

    switch (direction)
    {
    case 0:
        wooden_a_supports_paint_setup(session, 5, 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);
        paint_util_push_tunnel_left(session, height, TUNNEL_6);
        break;
    case 1:
        wooden_a_supports_paint_setup(session, 2, 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);
        break;
    case 2:
        wooden_a_supports_paint_setup(session, 3, 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);
        paint_util_push_tunnel_right(session, height, TUNNEL_6);
        break;
    case 3:
        wooden_a_supports_paint_setup(session, 4, 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);
        paint_util_push_tunnel_right(session, height, TUNNEL_6);
        paint_util_push_tunnel_left(session, height, TUNNEL_6);
        break;
    }

    paint_util_set_segment_support_height(session, SEGMENTS_ALL, 0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Gymnasiast，项目名称:OpenRCT2，代码行数:36，代码来源:VirginiaReel.cpp

示例17: inverted_impulse_rc_track_25_deg_up_to_flat

/** rct2: 0x008B04F0 */
static void inverted_impulse_rc_track_25_deg_up_to_flat(
    paint_session* session, ride_id_t rideIndex, uint8_t trackSequence, uint8_t direction, int32_t height,
    const TileElement* tileElement)
{
    switch (direction)
    {
        case 0:
            sub_98197C_rotated(
                session, direction, session->TrackColours[SCHEME_TRACK] | 19668, 0, 0, 32, 20, 3, height + 29, 0, 6,
                height + 37);
            break;
        case 1:
            sub_98197C_rotated(
                session, direction, session->TrackColours[SCHEME_TRACK] | 19669, 0, 0, 32, 20, 3, height + 29, 0, 6,
                height + 37);
            break;
        case 2:
            sub_98197C_rotated(
                session, direction, session->TrackColours[SCHEME_TRACK] | 19670, 0, 0, 32, 20, 3, height + 29, 0, 6,
                height + 37);
            break;
        case 3:
            sub_98197C_rotated(
                session, direction, session->TrackColours[SCHEME_TRACK] | 19671, 0, 0, 32, 20, 3, height + 29, 0, 6,
                height + 37);
            break;
    }

    paint_util_set_segment_support_height(
        session, paint_util_rotate_segments(SEGMENT_C4 | SEGMENT_CC | SEGMENT_D0, direction), 0xFFFF, 0);
    switch (direction)
    {
        case 0:
            metal_a_supports_paint_setup(
                session, METAL_SUPPORTS_TUBES_INVERTED, 6, 0, height + 52, session->TrackColours[SCHEME_SUPPORTS]);
            break;
        case 1:
            metal_a_supports_paint_setup(
                session, METAL_SUPPORTS_TUBES_INVERTED, 8, 0, height + 52, session->TrackColours[SCHEME_SUPPORTS]);
            break;
        case 2:
            metal_a_supports_paint_setup(
                session, METAL_SUPPORTS_TUBES_INVERTED, 7, 0, height + 52, session->TrackColours[SCHEME_SUPPORTS]);
            break;
        case 3:
            metal_a_supports_paint_setup(
                session, METAL_SUPPORTS_TUBES_INVERTED, 5, 0, height + 52, session->TrackColours[SCHEME_SUPPORTS]);
            break;
    }

    if (direction == 0 || direction == 3)
    {
        paint_util_push_tunnel_rotated(session, direction, height - 8, TUNNEL_3);
    }
    else
    {
        paint_util_push_tunnel_rotated(session, direction, height + 8, TUNNEL_13);
    }
    paint_util_set_general_support_height(session, height + 56, 0x20);
}

开发者ID:OpenRCT2，项目名称:OpenRCT2，代码行数:61，代码来源:InvertedImpulseCoaster.cpp

示例18: paint_mini_helicopters_track_left_quarter_turn_3_tiles

/** rct2: 0x0081F3E8 */
static void paint_mini_helicopters_track_left_quarter_turn_3_tiles(
    paint_session* session, ride_id_t rideIndex, uint8_t trackSequence, uint8_t direction, int32_t height,
    const TileElement* tileElement)
{
    track_paint_util_left_quarter_turn_3_tiles_paint(
        session, 3, height, direction, trackSequence, session->TrackColours[SCHEME_TRACK],
        trackSpritesSubmarineRideMiniHelicoptersQuarterTurn3Tiles);
    track_paint_util_left_quarter_turn_3_tiles_tunnel(session, height, TUNNEL_0, direction, trackSequence);

    switch (trackSequence)
    {
        case 0:
            metal_a_supports_paint_setup(session, METAL_SUPPORTS_STICK, 4, -1, height, session->TrackColours[SCHEME_SUPPORTS]);
            paint_util_set_segment_support_height(
                session, paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC | SEGMENT_B4, direction), 0xFFFF, 0);
            break;
        case 2:
            paint_util_set_segment_support_height(
                session, paint_util_rotate_segments(SEGMENT_C8 | SEGMENT_C4 | SEGMENT_D0 | SEGMENT_B8, direction), 0xFFFF, 0);
            break;
        case 3:
            metal_a_supports_paint_setup(session, METAL_SUPPORTS_STICK, 4, -1, height, session->TrackColours[SCHEME_SUPPORTS]);
            paint_util_set_segment_support_height(
                session, paint_util_rotate_segments(SEGMENT_C8 | SEGMENT_C4 | SEGMENT_D4 | SEGMENT_C0, direction), 0xFFFF, 0);
            break;
    }

    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:OpenRCT2，项目名称:OpenRCT2，代码行数:30，代码来源:MiniHelicopters.cpp

示例19: wooden_wild_mouse_track_station

static void wooden_wild_mouse_track_station(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    static constexpr const uint32 imageIds[4][2] = {
        { SPR_WOODEN_WILD_MOUSE_FLAT_SW_NE, SPR_STATION_BASE_B_SW_NE },
        { SPR_WOODEN_WILD_MOUSE_FLAT_NW_SE, SPR_STATION_BASE_B_NW_SE },
        { SPR_WOODEN_WILD_MOUSE_FLAT_SW_NE, SPR_STATION_BASE_B_SW_NE },
        { SPR_WOODEN_WILD_MOUSE_FLAT_NW_SE, SPR_STATION_BASE_B_NW_SE },
    };

    sub_98197C_rotated(session, direction, imageIds[direction][1] | session->TrackColours[SCHEME_MISC], 0, 0, 32, 28, 1,
                       height - 2, 0, 2, height);
    sub_98199C_rotated(session, direction, imageIds[direction][0] | session->TrackColours[SCHEME_TRACK], 0, 6, 32, 20, 1,
                       height, 0, 0, height);
    wooden_a_supports_paint_setup(session, direction & 1, 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);
    track_paint_util_draw_station(session, rideIndex, trackSequence, direction, height, tileElement);
    paint_util_push_tunnel_rotated(session, direction, height, TUNNEL_6);
    paint_util_set_segment_support_height(session, SEGMENTS_ALL, 0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Gymnasiast，项目名称:OpenRCT2，代码行数:25，代码来源:WoodenWildMouse.cpp

示例20: wooden_wild_mouse_track_flat

/** rct2: 0x008A5464 */
static void wooden_wild_mouse_track_flat(
    paint_session *          session,
    uint8                    rideIndex,
    uint8                    trackSequence,
    uint8                    direction,
    sint32                   height,
    const rct_tile_element * tileElement)
{
    static constexpr const uint32 imageIds[4] = {
        SPR_WOODEN_WILD_MOUSE_FLAT_SW_NE,
        SPR_WOODEN_WILD_MOUSE_FLAT_NW_SE,
        SPR_WOODEN_WILD_MOUSE_FLAT_SW_NE,
        SPR_WOODEN_WILD_MOUSE_FLAT_NW_SE,
    };

    uint32 imageId = imageIds[direction] | session->TrackColours[SCHEME_TRACK];
    sub_98196C_rotated(session, direction, imageId, 0, 6, 32, 20, 1, height);
    wooden_a_supports_paint_setup(session, direction & 1, 0, height, session->TrackColours[SCHEME_SUPPORTS], nullptr);
    paint_util_push_tunnel_rotated(session, direction, height, TUNNEL_0);
    paint_util_set_segment_support_height(
        session,
        paint_util_rotate_segments(SEGMENT_B4 | SEGMENT_B8 | SEGMENT_BC | SEGMENT_C0 | SEGMENT_C8 | SEGMENT_D4, direction),
        height, 0x20);
    paint_util_set_segment_support_height(session, paint_util_rotate_segments(SEGMENT_C4 | SEGMENT_CC | SEGMENT_D0, direction),
                                          0xFFFF, 0);
    paint_util_set_general_support_height(session, height + 32, 0x20);
}

开发者ID:Gymnasiast，项目名称:OpenRCT2，代码行数:28，代码来源:WoodenWildMouse.cpp

注：本文中的paint_util_set_general_support_height函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ paint_util_set_segment_support_height函数代码示例发布时间：2022-05-30

C++ paint_partial_white函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19228|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8645|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9667|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ paint_util_set_general_support_height函数代码示例

示例1: paint_roto_drop_base

示例2: paint_ghost_train_track_25_deg_up_to_flat_shared

示例3: paint_ghost_train_track_brakes

示例4: inverted_impulse_rc_track_station

示例5: wooden_wild_mouse_track_right_quarter_turn_3

示例6: paint_mini_helicopters_track_flat

示例7: paint_monorail_track_25_deg_up_to_flat

示例8: paint_ghost_train_track_spinning_tunnel

示例9: paint_observation_tower_section

示例10: inverted_impulse_rc_track_flat

示例11: paint_virginia_reel_track_flat

示例12: paint_mini_helicopters_track_station

示例13: paint_virginia_reel_track_left_quarter_turn_3_tiles

示例14: paint_virginia_reel_station

示例15: submarine_ride_paint_track_flat

示例16: paint_virginia_reel_track_left_quarter_turn_1_tile

示例17: inverted_impulse_rc_track_25_deg_up_to_flat

示例18: paint_mini_helicopters_track_left_quarter_turn_3_tiles

示例19: wooden_wild_mouse_track_station

示例20: wooden_wild_mouse_track_flat

请发表评论

全部评论

上一篇：

下一篇：

Delphi 日志记录和查看

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053