C++ ieee_p_2592010699_sub_1744673427_503743352函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ieee_p_2592010699_sub_1744673427_503743352函数的典型用法代码示例。如果您正苦于以下问题：C++ ieee_p_2592010699_sub_1744673427_503743352函数的具体用法？C++ ieee_p_2592010699_sub_1744673427_503743352怎么用？C++ ieee_p_2592010699_sub_1744673427_503743352使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ieee_p_2592010699_sub_1744673427_503743352函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_11

static void axi_hdmi_v1_00_a_a_0888816447_3212880686_p_11(char *t0)
{
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    char *t7;
    int t8;
    unsigned int t9;
    unsigned int t10;
    unsigned int t11;
    unsigned char t12;
    char *t13;
    char *t14;
    char *t15;
    char *t16;
    char *t17;

LAB0:    xsi_set_current_line(261, ng0);
    t1 = (t0 + 992U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 10208);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(262, ng0);
    t3 = (t0 + 2632U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)2);
    if (t6 != 0)
        goto LAB5;

LAB7:
LAB6:    goto LAB3;

LAB5:    xsi_set_current_line(263, ng0);
    t3 = (t0 + 4552U);
    t7 = *((char **)t3);
    t8 = (0 - 7);
    t9 = (t8 * -1);
    t10 = (1U * t9);
    t11 = (0 + t10);
    t3 = (t7 + t11);
    t12 = *((unsigned char *)t3);
    t13 = (t0 + 11184);
    t14 = (t13 + 56U);
    t15 = *((char **)t14);
    t16 = (t15 + 56U);
    t17 = *((char **)t16);
    *((unsigned char *)t17) = t12;
    xsi_driver_first_trans_fast(t13);
    goto LAB6;

}

开发者ID:zaphinath，项目名称:SpaceInvaders，代码行数:61，代码来源:a_0888816447_3212880686.c

示例2: work_a_3037777339_3212880686_p_2

static void work_a_3037777339_3212880686_p_2(char *t0)
{
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    char *t7;
    char *t8;
    char *t9;
    char *t10;
    char *t11;
    char *t12;

LAB0:    xsi_set_current_line(91, ng0);
    t1 = (t0 + 568U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 5688);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(93, ng0);
    t3 = (t0 + 2248U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)3);
    if (t6 != 0)
        goto LAB5;

LAB7:    xsi_set_current_line(98, ng0);
    t1 = (t0 + 1788U);
    t3 = *((char **)t1);
    t2 = *((unsigned char *)t3);
    t5 = (t2 == (unsigned char)3);
    if (t5 != 0)
        goto LAB8;

LAB10:
LAB9:    xsi_set_current_line(102, ng0);
    t1 = (t0 + 1972U);
    t3 = *((char **)t1);
    t2 = *((unsigned char *)t3);
    t5 = (t2 == (unsigned char)3);
    if (t5 != 0)
        goto LAB11;

LAB13:
LAB12:
LAB6:    goto LAB3;

LAB5:    xsi_set_current_line(94, ng0);
    t3 = xsi_get_transient_memory(8U);
    memset(t3, 0, 8U);
    t7 = t3;
    memset(t7, (unsigned char)2, 8U);
    t8 = (t0 + 5936);
    t9 = (t8 + 32U);
    t10 = *((char **)t9);
    t11 = (t10 + 40U);
    t12 = *((char **)t11);
    memcpy(t12, t3, 8U);
    xsi_driver_first_trans_fast(t8);
    xsi_set_current_line(95, ng0);
    t1 = xsi_get_transient_memory(8U);
    memset(t1, 0, 8U);
    t3 = t1;
    memset(t3, (unsigned char)2, 8U);
    t4 = (t0 + 5972);
    t7 = (t4 + 32U);
    t8 = *((char **)t7);
    t9 = (t8 + 40U);
    t10 = *((char **)t9);
    memcpy(t10, t1, 8U);
    xsi_driver_first_trans_fast(t4);
    goto LAB6;

LAB8:    xsi_set_current_line(99, ng0);
    t1 = (t0 + 1236U);
    t4 = *((char **)t1);
    t1 = (t0 + 5936);
    t7 = (t1 + 32U);
    t8 = *((char **)t7);
    t9 = (t8 + 40U);
    t10 = *((char **)t9);
    memcpy(t10, t4, 8U);
    xsi_driver_first_trans_fast(t1);
    goto LAB9;

LAB11:    xsi_set_current_line(103, ng0);
    t1 = (t0 + 1880U);
    t4 = *((char **)t1);
    t1 = (t0 + 5972);
    t7 = (t1 + 32U);
    t8 = *((char **)t7);
    t9 = (t8 + 40U);
//.........这里部分代码省略.........

开发者ID:Dacode45，项目名称:exam1，代码行数:101，代码来源:a_3037777339_3212880686.c

示例3: work_a_3392787015_3212880686_p_0

static void work_a_3392787015_3212880686_p_0(char *t0)
{
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    char *t7;
    char *t8;
    int t9;
    int t10;
    unsigned int t11;
    unsigned int t12;
    unsigned int t13;
    char *t14;
    char *t15;
    char *t16;
    char *t17;
    char *t18;

LAB0:    xsi_set_current_line(65, ng0);
    t1 = (t0 + 992U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 6808);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(66, ng0);
    t3 = (t0 + 2312U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)3);
    if (t6 != 0)
        goto LAB5;

LAB7:
LAB6:    goto LAB3;

LAB5:    xsi_set_current_line(66, ng0);
    t3 = (t0 + 2152U);
    t7 = *((char **)t3);
    t3 = (t0 + 1992U);
    t8 = *((char **)t3);
    t3 = (t0 + 11280U);
    t9 = ieee_p_3620187407_sub_514432868_3965413181(IEEE_P_3620187407, t8, t3);
    t10 = (t9 - 255);
    t11 = (t10 * -1);
    t12 = (32U * t11);
    t13 = (0U + t12);
    t14 = (t0 + 7000);
    t15 = (t14 + 56U);
    t16 = *((char **)t15);
    t17 = (t16 + 56U);
    t18 = *((char **)t17);
    memcpy(t18, t7, 32U);
    xsi_driver_first_trans_delta(t14, t13, 32U, 0LL);
    goto LAB6;

}

开发者ID:mattmanj17，项目名称:Atlas，代码行数:64，代码来源:a_3392787015_3212880686.c

示例4: work_a_1310799906_3212880686_p_0

static void work_a_1310799906_3212880686_p_0(char *t0)
{
    char *t1;
    char *t2;
    unsigned char t3;
    unsigned char t4;
    char *t5;
    char *t6;
    char *t7;
    char *t8;
    int t9;
    unsigned char t10;
    unsigned char t11;
    char *t12;
    char *t13;
    int t14;

LAB0:    xsi_set_current_line(19, ng0);
    t1 = (t0 + 1192U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t4 = (t3 == (unsigned char)3);
    if (t4 != 0)
        goto LAB2;

LAB4:    t1 = (t0 + 992U);
    t3 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB5;

LAB6:
LAB3:    t1 = (t0 + 3808);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(20, ng0);
    t1 = (t0 + 3920);
    t5 = (t1 + 56U);
    t6 = *((char **)t5);
    t7 = (t6 + 56U);
    t8 = *((char **)t7);
    *((unsigned char *)t8) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(21, ng0);
    t1 = (t0 + 3984);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((int *)t7) = 0;
    xsi_driver_first_trans_fast(t1);
    goto LAB3;

LAB5:    xsi_set_current_line(23, ng0);
    t2 = (t0 + 1832U);
    t5 = *((char **)t2);
    t9 = *((int *)t5);
    t4 = (t9 == 25000);
    if (t4 != 0)
        goto LAB7;

LAB9:    xsi_set_current_line(27, ng0);
    t1 = (t0 + 1832U);
    t2 = *((char **)t1);
    t9 = *((int *)t2);
    t14 = (t9 + 1);
    t1 = (t0 + 3984);
    t5 = (t1 + 56U);
    t6 = *((char **)t5);
    t7 = (t6 + 56U);
    t8 = *((char **)t7);
    *((int *)t8) = t14;
    xsi_driver_first_trans_fast(t1);

LAB8:    goto LAB3;

LAB7:    xsi_set_current_line(24, ng0);
    t2 = (t0 + 1672U);
    t6 = *((char **)t2);
    t10 = *((unsigned char *)t6);
    t11 = ieee_p_2592010699_sub_1690584930_503743352(IEEE_P_2592010699, t10);
    t2 = (t0 + 3920);
    t7 = (t2 + 56U);
    t8 = *((char **)t7);
    t12 = (t8 + 56U);
    t13 = *((char **)t12);
    *((unsigned char *)t13) = t11;
    xsi_driver_first_trans_fast(t2);
    xsi_set_current_line(25, ng0);
    t1 = (t0 + 3984);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((int *)t7) = 0;
    xsi_driver_first_trans_fast(t1);
    goto LAB8;

}

开发者ID:AngelLM，项目名称:Frecuencimetro-VHDL-Xilinx，代码行数:99，代码来源:a_1310799906_3212880686.c

示例5: work_a_3037777339_3212880686_p_1

static void work_a_3037777339_3212880686_p_1(char *t0)
{
    char t14[16];
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    char *t7;
    char *t8;
    char *t9;
    char *t10;
    char *t11;
    char *t12;
    unsigned char t13;
    unsigned int t15;
    unsigned int t16;
    unsigned char t17;
    char *t18;
    char *t19;

LAB0:    xsi_set_current_line(73, ng0);
    t1 = (t0 + 568U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 5680);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(74, ng0);
    t3 = (t0 + 1604U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)0);
    if (t6 != 0)
        goto LAB5;

LAB7:    t1 = (t0 + 1604U);
    t3 = *((char **)t1);
    t2 = *((unsigned char *)t3);
    t5 = (t2 == (unsigned char)7);
    if (t5 != 0)
        goto LAB8;

LAB9:    xsi_set_current_line(83, ng0);
    t1 = (t0 + 2708U);
    t3 = *((char **)t1);
    t1 = (t0 + 5900);
    t4 = (t1 + 32U);
    t7 = *((char **)t4);
    t8 = (t7 + 40U);
    t9 = *((char **)t8);
    memcpy(t9, t3, 16U);
    xsi_driver_first_trans_fast(t1);

LAB6:    goto LAB3;

LAB5:    xsi_set_current_line(75, ng0);
    t3 = xsi_get_transient_memory(16U);
    memset(t3, 0, 16U);
    t7 = t3;
    memset(t7, (unsigned char)2, 16U);
    t8 = (t0 + 5900);
    t9 = (t8 + 32U);
    t10 = *((char **)t9);
    t11 = (t10 + 40U);
    t12 = *((char **)t11);
    memcpy(t12, t3, 16U);
    xsi_driver_first_trans_fast(t8);
    goto LAB6;

LAB8:    xsi_set_current_line(77, ng0);
    t1 = (t0 + 2616U);
    t4 = *((char **)t1);
    t6 = *((unsigned char *)t4);
    t13 = (t6 == (unsigned char)2);
    if (t13 != 0)
        goto LAB10;

LAB12:    xsi_set_current_line(80, ng0);
    t1 = (t0 + 2708U);
    t3 = *((char **)t1);
    t1 = (t0 + 5900);
    t4 = (t1 + 32U);
    t7 = *((char **)t4);
    t8 = (t7 + 40U);
    t9 = *((char **)t8);
    memcpy(t9, t3, 16U);
    xsi_driver_first_trans_fast(t1);

LAB11:    goto LAB6;

LAB10:    xsi_set_current_line(78, ng0);
    t1 = (t0 + 2708U);
    t7 = *((char **)t1);
    t1 = (t0 + 9256U);
//.........这里部分代码省略.........

开发者ID:Dacode45，项目名称:exam1，代码行数:101，代码来源:a_3037777339_3212880686.c

示例6: work_a_0308195381_2372691052_p_0

static void work_a_0308195381_2372691052_p_0(char *t0)
{
    char t15[16];
    char t16[16];
    char t19[16];
    char *t1;
    char *t2;
    unsigned char t3;
    unsigned char t4;
    char *t5;
    char *t6;
    char *t7;
    char *t8;
    char *t9;
    char *t10;
    char *t11;
    unsigned int t12;
    unsigned int t13;
    unsigned int t14;
    int t17;
    unsigned int t18;
    int t20;
    char *t21;
    char *t22;
    char *t23;
    char *t24;
    static char *nl0[] = {&&LAB8, &&LAB9, &&LAB10, &&LAB11, &&LAB12, &&LAB13, &&LAB14};

LAB0:    xsi_set_current_line(230, ng0);
    t1 = (t0 + 2892U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t4 = (t3 == (unsigned char)3);
    if (t4 != 0)
        goto LAB2;

LAB4:    t1 = (t0 + 2776U);
    t3 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB5;

LAB6:
LAB3:    t1 = (t0 + 5092);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(231, ng0);
    t1 = (t0 + 5136);
    t5 = (t1 + 32U);
    t6 = *((char **)t5);
    t7 = (t6 + 32U);
    t8 = *((char **)t7);
    *((unsigned char *)t8) = (unsigned char)0;
    xsi_driver_first_trans_fast(t1);
    goto LAB3;

LAB5:    xsi_set_current_line(233, ng0);
    t2 = (t0 + 5172);
    t5 = (t2 + 32U);
    t6 = *((char **)t5);
    t7 = (t6 + 32U);
    t8 = *((char **)t7);
    *((unsigned char *)t8) = (unsigned char)2;
    xsi_driver_first_trans_fast(t2);
    xsi_set_current_line(234, ng0);
    t1 = (t0 + 5208);
    t2 = (t1 + 32U);
    t5 = *((char **)t2);
    t6 = (t5 + 32U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(235, ng0);
    t1 = (t0 + 5244);
    t2 = (t1 + 32U);
    t5 = *((char **)t2);
    t6 = (t5 + 32U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(236, ng0);
    t1 = (t0 + 3444U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t1 = (char *)((nl0) + t3);
    goto **((char **)t1);

LAB7:    goto LAB3;

LAB8:    xsi_set_current_line(238, ng0);
    t5 = (t0 + 2616U);
    t6 = *((char **)t5);
    t5 = (t0 + 11032U);
    t4 = ieee_p_3620187407_sub_2599083972_3965413181(IEEE_P_3620187407, 1, t6, t5);
    if (t4 != 0)
        goto LAB15;

LAB17:
LAB16:    goto LAB7;

//.........这里部分代码省略.........

开发者ID:pharmafirma，项目名称:reconos，代码行数:101，代码来源:a_0308195381_2372691052.c

示例7: unisim_a_1297477671_0429821216_p_5

static void unisim_a_1297477671_0429821216_p_5(char *t0)
{
    char *t1;
    char *t2;
    unsigned char t3;
    unsigned char t4;
    char *t5;
    char *t6;
    char *t7;
    char *t8;

LAB0:    t1 = (t0 + 868U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t4 = (t3 == (unsigned char)3);
    if (t4 != 0)
        goto LAB2;

LAB4:    t1 = (t0 + 660U);
    t3 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB5;

LAB7:
LAB6:    t1 = (t0 + 660U);
    t3 = ieee_p_2592010699_sub_1258338084_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB8;

LAB10:
LAB9:
LAB3:    t1 = (t0 + 4612);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    t1 = (t0 + 5004);
    t5 = (t1 + 32U);
    t6 = *((char **)t5);
    t7 = (t6 + 40U);
    t8 = *((char **)t7);
    *((int *)t8) = 0;
    xsi_driver_first_trans_fast(t1);
    t1 = (t0 + 5040);
    t2 = (t1 + 32U);
    t5 = *((char **)t2);
    t6 = (t5 + 40U);
    t7 = *((char **)t6);
    *((int *)t7) = 0;
    xsi_driver_first_trans_fast(t1);
    goto LAB3;

LAB5:    t2 = (t0 + 5004);
    t5 = (t2 + 32U);
    t6 = *((char **)t5);
    t7 = (t6 + 40U);
    t8 = *((char **)t7);
    *((int *)t8) = 1;
    xsi_driver_first_trans_fast(t2);
    goto LAB6;

LAB8:    t2 = (t0 + 5040);
    t5 = (t2 + 32U);
    t6 = *((char **)t5);
    t7 = (t6 + 40U);
    t8 = *((char **)t7);
    *((int *)t8) = 1;
    xsi_driver_first_trans_fast(t2);
    goto LAB9;

}

开发者ID:mdarino，项目名称:LSE_introFPGA，代码行数:70，代码来源:a_1297477671_0429821216.c

示例8: work_a_3307859654_3212880686_p_2

static void work_a_3307859654_3212880686_p_2(char *t0)
{
    char *t1;
    char *t2;
    unsigned char t3;
    unsigned char t4;
    char *t5;
    char *t6;
    char *t7;
    char *t8;
    unsigned char t9;
    unsigned char t10;
    unsigned char t11;
    unsigned char t12;
    unsigned char t13;
    unsigned char t14;
    unsigned char t15;
    char *t16;
    char *t17;
    char *t18;
    char *t19;

LAB0:    xsi_set_current_line(107, ng0);
    t1 = (t0 + 1032U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t4 = (t3 == (unsigned char)3);
    if (t4 != 0)
        goto LAB2;

LAB4:    t1 = (t0 + 1792U);
    t3 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB5;

LAB6:
LAB3:    t1 = (t0 + 9296);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(108, ng0);
    t1 = (t0 + 9712);
    t5 = (t1 + 56U);
    t6 = *((char **)t5);
    t7 = (t6 + 56U);
    t8 = *((char **)t7);
    *((unsigned char *)t8) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(109, ng0);
    t1 = (t0 + 9776);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(110, ng0);
    t1 = (t0 + 9840);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(111, ng0);
    t1 = (t0 + 9904);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(112, ng0);
    t1 = (t0 + 9968);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(113, ng0);
    t1 = (t0 + 10032);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    goto LAB3;

LAB5:    xsi_set_current_line(115, ng0);
    t2 = (t0 + 3592U);
    t5 = *((char **)t2);
    t4 = *((unsigned char *)t5);
    t2 = (t0 + 3752U);
    t6 = *((char **)t2);
    t9 = *((unsigned char *)t6);
    t2 = (t0 + 3112U);
    t7 = *((char **)t2);
    t10 = *((unsigned char *)t7);
//.........这里部分代码省略.........

开发者ID:NCAR，项目名称:spoldrx，代码行数:101，代码来源:a_3307859654_3212880686.c

示例9: work_a_3307859654_3212880686_p_1

static void work_a_3307859654_3212880686_p_1(char *t0)
{
    char *t1;
    char *t2;
    unsigned char t3;
    unsigned char t4;
    char *t5;
    char *t6;
    char *t7;
    char *t8;
    unsigned char t9;
    unsigned char t10;
    unsigned char t11;
    unsigned char t12;
    char *t13;
    char *t14;

LAB0:    xsi_set_current_line(95, ng0);
    t1 = (t0 + 1032U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t4 = (t3 == (unsigned char)3);
    if (t4 != 0)
        goto LAB2;

LAB4:    t1 = (t0 + 1792U);
    t3 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB5;

LAB6:
LAB3:    t1 = (t0 + 9280);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(96, ng0);
    t1 = (t0 + 9584);
    t5 = (t1 + 56U);
    t6 = *((char **)t5);
    t7 = (t6 + 56U);
    t8 = *((char **)t7);
    *((unsigned char *)t8) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    xsi_set_current_line(97, ng0);
    t1 = (t0 + 9648);
    t2 = (t1 + 56U);
    t5 = *((char **)t2);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    *((unsigned char *)t7) = (unsigned char)2;
    xsi_driver_first_trans_fast(t1);
    goto LAB3;

LAB5:    xsi_set_current_line(99, ng0);
    t2 = (t0 + 2952U);
    t5 = *((char **)t2);
    t4 = *((unsigned char *)t5);
    t2 = (t0 + 1992U);
    t6 = *((char **)t2);
    t9 = *((unsigned char *)t6);
    t10 = ieee_p_2592010699_sub_1690584930_503743352(IEEE_P_2592010699, t9);
    t11 = ieee_p_2592010699_sub_2545490612_503743352(IEEE_P_2592010699, t4, t10);
    t12 = ieee_p_2592010699_sub_1690584930_503743352(IEEE_P_2592010699, t11);
    t2 = (t0 + 9584);
    t7 = (t2 + 56U);
    t8 = *((char **)t7);
    t13 = (t8 + 56U);
    t14 = *((char **)t13);
    *((unsigned char *)t14) = t12;
    xsi_driver_first_trans_fast(t2);
    xsi_set_current_line(100, ng0);
    t1 = (t0 + 1992U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t1 = (t0 + 9648);
    t5 = (t1 + 56U);
    t6 = *((char **)t5);
    t7 = (t6 + 56U);
    t8 = *((char **)t7);
    *((unsigned char *)t8) = t3;
    xsi_driver_first_trans_fast(t1);
    goto LAB3;

}

开发者ID:NCAR，项目名称:spoldrx，代码行数:84，代码来源:a_3307859654_3212880686.c

示例10: unisim_a_1836616293_3089378898_p_1

static void unisim_a_1836616293_3089378898_p_1(char *t0)
{
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    int64 t7;
    char *t8;
    char *t9;
    char *t10;
    char *t11;
    char *t12;

LAB0:    t1 = (t0 + 1152U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 3536);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    t3 = (t0 + 1512U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)3);
    if (t6 != 0)
        goto LAB5;

LAB7:    t7 = (100 * 1LL);
    t1 = (t0 + 1352U);
    t3 = *((char **)t1);
    t2 = *((unsigned char *)t3);
    t1 = (t0 + 3680);
    t4 = (t1 + 56U);
    t8 = *((char **)t4);
    t9 = (t8 + 56U);
    t10 = *((char **)t9);
    *((unsigned char *)t10) = t2;
    xsi_driver_first_trans_delta(t1, 0U, 1, t7);
    t11 = (t0 + 3680);
    xsi_driver_intertial_reject(t11, t7, t7);

LAB6:    goto LAB3;

LAB5:    t7 = (100 * 1LL);
    t3 = (t0 + 3680);
    t8 = (t3 + 56U);
    t9 = *((char **)t8);
    t10 = (t9 + 56U);
    t11 = *((char **)t10);
    *((unsigned char *)t11) = (unsigned char)3;
    xsi_driver_first_trans_delta(t3, 0U, 1, t7);
    t12 = (t0 + 3680);
    xsi_driver_intertial_reject(t12, t7, t7);
    goto LAB6;

}

开发者ID:hellgheast，项目名称:DCF77_SN_Part2，代码行数:61，代码来源:a_1836616293_3089378898.c

示例11: work_a_3565583652_3212880686_p_5


//.........这里部分代码省略.........

LAB6:    t1 = (unsigned char)0;

LAB7:    if (t1 != 0)
        goto LAB2;

LAB4:    xsi_set_current_line(108, ng0);
    t4 = (t0 + 7272);
    t5 = (t4 + 56U);
    t8 = *((char **)t5);
    t11 = (t8 + 56U);
    t14 = *((char **)t11);
    *((unsigned char *)t14) = (unsigned char)2;
    xsi_driver_first_trans_fast_port(t4);

LAB3:    xsi_set_current_line(112, ng0);
    t4 = (t0 + 4072U);
    t5 = *((char **)t4);
    t1 = *((unsigned char *)t5);
    t2 = (t1 == (unsigned char)1);
    if (t2 != 0)
        goto LAB31;

LAB33:    t4 = (t0 + 4072U);
    t5 = *((char **)t4);
    t1 = *((unsigned char *)t5);
    t2 = (t1 == (unsigned char)2);
    if (t2 != 0)
        goto LAB34;

LAB35:
LAB32:    xsi_set_current_line(118, ng0);
    t4 = (t0 + 992U);
    t1 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t4, 0U, 0U);
    if (t1 != 0)
        goto LAB36;

LAB38:
LAB37:    t4 = (t0 + 6872);
    *((int *)t4) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(100, ng0);
    t4 = (t0 + 4072U);
    t18 = *((char **)t4);
    t19 = *((unsigned char *)t18);
    t20 = (t19 == (unsigned char)1);
    if (t20 == 1)
        goto LAB17;

LAB18:    t17 = (unsigned char)0;

LAB19:    if (t17 != 0)
        goto LAB14;

LAB16:    t4 = (t0 + 4072U);
    t5 = *((char **)t4);
    t2 = *((unsigned char *)t5);
    t3 = (t2 == (unsigned char)2);
    if (t3 == 1)
        goto LAB25;

LAB26:    t1 = (unsigned char)0;

LAB27:    if (t1 != 0)
        goto LAB23;

开发者ID:Holginator，项目名称:Bachelor，代码行数:67，代码来源:a_3565583652_3212880686.c

示例12: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_6


//.........这里部分代码省略.........

}

static void axi_hdmi_v1_00_a_a_0888816447_3212880686_p_7(char *t0)
{
    char t14[16];
    char *t1;
    unsigned char t2;
    unsigned char t3;
    char *t4;
    char *t5;
    unsigned char t6;
    unsigned char t7;
    char *t8;
    unsigned char t9;
    unsigned char t10;
    char *t11;
    unsigned char t12;
    unsigned char t13;
    char *t15;
    char *t16;
    char *t17;
    unsigned int t18;
    unsigned int t19;
    unsigned char t20;
    char *t21;
    char *t22;
    char *t23;
    char *t24;
    char *t25;

LAB0:    xsi_set_current_line(189, ng0);
    t1 = (t0 + 992U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 10144);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(190, ng0);
    t4 = (t0 + 2632U);
    t5 = *((char **)t4);
    t6 = *((unsigned char *)t5);
    t7 = (t6 == (unsigned char)1);
    if (t7 == 1)
        goto LAB8;

LAB9:    t4 = (t0 + 2632U);
    t8 = *((char **)t4);
    t9 = *((unsigned char *)t8);
    t10 = (t9 == (unsigned char)5);
    t3 = t10;

LAB10:    if (t3 != 0)
        goto LAB5;

LAB7:    xsi_set_current_line(195, ng0);
    t1 = xsi_get_transient_memory(4U);
    memset(t1, 0, 4U);
    t4 = t1;
    memset(t4, (unsigned char)2, 4U);
    t5 = (t0 + 10864);
    t8 = (t5 + 56U);

开发者ID:zaphinath，项目名称:SpaceInvaders，代码行数:67，代码来源:a_0888816447_3212880686.c

示例13: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_0

static void axi_hdmi_v1_00_a_a_0888816447_3212880686_p_0(char *t0)
{
    char t11[16];
    char t13[16];
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned int t5;
    unsigned int t6;
    unsigned int t7;
    char *t8;
    char *t9;
    unsigned char t10;
    char *t12;
    char *t14;
    char *t15;
    int t16;
    unsigned int t17;
    unsigned char t18;
    char *t19;
    char *t20;
    char *t21;
    char *t22;

LAB0:    xsi_set_current_line(92, ng0);
    t1 = (t0 + 992U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 10032);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(93, ng0);
    t3 = (t0 + 2952U);
    t4 = *((char **)t3);
    t5 = (3 - 2);
    t6 = (t5 * 1U);
    t7 = (0 + t6);
    t3 = (t4 + t7);
    t8 = (t0 + 2152U);
    t9 = *((char **)t8);
    t10 = *((unsigned char *)t9);
    t12 = ((IEEE_P_2592010699) + 4024);
    t14 = (t13 + 0U);
    t15 = (t14 + 0U);
    *((int *)t15) = 2;
    t15 = (t14 + 4U);
    *((int *)t15) = 0;
    t15 = (t14 + 8U);
    *((int *)t15) = -1;
    t16 = (0 - 2);
    t17 = (t16 * -1);
    t17 = (t17 + 1);
    t15 = (t14 + 12U);
    *((unsigned int *)t15) = t17;
    t8 = xsi_base_array_concat(t8, t11, t12, (char)97, t3, t13, (char)99, t10, (char)101);
    t17 = (3U + 1U);
    t18 = (4U != t17);
    if (t18 == 1)
        goto LAB5;

LAB6:    t15 = (t0 + 10352);
    t19 = (t15 + 56U);
    t20 = *((char **)t19);
    t21 = (t20 + 56U);
    t22 = *((char **)t21);
    memcpy(t22, t8, 4U);
    xsi_driver_first_trans_fast(t15);
    xsi_set_current_line(94, ng0);
    t1 = (t0 + 3112U);
    t3 = *((char **)t1);
    t5 = (3 - 2);
    t6 = (t5 * 1U);
    t7 = (0 + t6);
    t1 = (t3 + t7);
    t4 = (t0 + 1992U);
    t8 = *((char **)t4);
    t2 = *((unsigned char *)t8);
    t9 = ((IEEE_P_2592010699) + 4024);
    t12 = (t13 + 0U);
    t14 = (t12 + 0U);
    *((int *)t14) = 2;
    t14 = (t12 + 4U);
    *((int *)t14) = 0;
    t14 = (t12 + 8U);
    *((int *)t14) = -1;
    t16 = (0 - 2);
    t17 = (t16 * -1);
    t17 = (t17 + 1);
    t14 = (t12 + 12U);
    *((unsigned int *)t14) = t17;
    t4 = xsi_base_array_concat(t4, t11, t9, (char)97, t1, t13, (char)99, t2, (char)101);
    t17 = (3U + 1U);
    t10 = (4U != t17);
    if (t10 == 1)
        goto LAB7;
//.........这里部分代码省略.........

开发者ID:zaphinath，项目名称:SpaceInvaders，代码行数:101，代码来源:a_0888816447_3212880686.c

示例14: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_12

static void axi_hdmi_v1_00_a_a_0888816447_3212880686_p_12(char *t0)
{
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    char *t7;
    unsigned char t8;
    unsigned char t9;
    char *t10;
    unsigned char t11;
    unsigned char t12;
    char *t13;
    char *t14;
    char *t15;
    char *t16;

LAB0:    xsi_set_current_line(270, ng0);
    t1 = (t0 + 992U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 10224);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(271, ng0);
    t3 = (t0 + 2632U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)7);
    if (t6 != 0)
        goto LAB5;

LAB7:
LAB6:    goto LAB3;

LAB5:    xsi_set_current_line(272, ng0);
    t3 = (t0 + 3752U);
    t7 = *((char **)t3);
    t8 = *((unsigned char *)t7);
    t9 = (t8 == (unsigned char)3);
    if (t9 != 0)
        goto LAB8;

LAB10:
LAB9:    goto LAB6;

LAB8:    xsi_set_current_line(273, ng0);
    t3 = (t0 + 2152U);
    t10 = *((char **)t3);
    t11 = *((unsigned char *)t10);
    t12 = ieee_p_2592010699_sub_1690584930_503743352(IEEE_P_2592010699, t11);
    t3 = (t0 + 11248);
    t13 = (t3 + 56U);
    t14 = *((char **)t13);
    t15 = (t14 + 56U);
    t16 = *((char **)t15);
    *((unsigned char *)t16) = t12;
    xsi_driver_first_trans_fast(t3);
    goto LAB9;

}

开发者ID:zaphinath，项目名称:SpaceInvaders，代码行数:67，代码来源:a_0888816447_3212880686.c

示例15: unisim_a_2496767846_3807856483_p_1

static void unisim_a_2496767846_3807856483_p_1(char *t0)
{
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    char *t7;
    char *t8;
    char *t9;
    unsigned char t10;
    char *t11;
    unsigned char t12;
    char *t13;
    unsigned char t14;
    char *t15;
    unsigned char t16;
    char *t17;
    unsigned char t18;
    char *t19;
    unsigned char t20;
    char *t21;
    int t22;
    int64 t23;
    int t24;
    unsigned int t25;
    unsigned int t26;
    unsigned int t27;
    int t28;
    int t29;
    unsigned int t30;
    unsigned int t31;
    unsigned int t32;

LAB0:    t1 = (t0 + 2272U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 4976);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    t3 = (t0 + 2472U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)3);
    if (t6 != 0)
        goto LAB5;

LAB7:
LAB6:    goto LAB3;

LAB5:    t3 = xsi_get_transient_memory(6U);
    memset(t3, 0, 6U);
    t7 = t3;
    t8 = (t0 + 1992U);
    t9 = *((char **)t8);
    t10 = *((unsigned char *)t9);
    *((unsigned char *)t7) = t10;
    t7 = (t7 + 1U);
    t8 = (t0 + 1832U);
    t11 = *((char **)t8);
    t12 = *((unsigned char *)t11);
    *((unsigned char *)t7) = t12;
    t7 = (t7 + 1U);
    t8 = (t0 + 1672U);
    t13 = *((char **)t8);
    t14 = *((unsigned char *)t13);
    *((unsigned char *)t7) = t14;
    t7 = (t7 + 1U);
    t8 = (t0 + 1512U);
    t15 = *((char **)t8);
    t16 = *((unsigned char *)t15);
    *((unsigned char *)t7) = t16;
    t7 = (t7 + 1U);
    t8 = (t0 + 1352U);
    t17 = *((char **)t8);
    t18 = *((unsigned char *)t17);
    *((unsigned char *)t7) = t18;
    t7 = (t7 + 1U);
    t8 = (t0 + 1192U);
    t19 = *((char **)t8);
    t20 = *((unsigned char *)t19);
    *((unsigned char *)t7) = t20;
    t8 = (t0 + 3408U);
    t21 = *((char **)t8);
    t8 = (t21 + 0);
    memcpy(t8, t3, 6U);
    t1 = (t0 + 3408U);
    t3 = *((char **)t1);
    t1 = (t0 + 7628U);
    t22 = unisim_p_3222816464_sub_3182959421_279109243(UNISIM_P_3222816464, t3, t1);
    t4 = (t0 + 3288U);
    t7 = *((char **)t4);
    t4 = (t7 + 0);
    *((int *)t4) = t22;
    t23 = (100 * 1LL);
//.........这里部分代码省略.........

开发者ID:hellgheast，项目名称:DCF77_SN_Part2，代码行数:101，代码来源:a_2496767846_3807856483.c

示例16: work_a_4163910571_0412081955_p_0

static void work_a_4163910571_0412081955_p_0(char *t0)
{
    char *t1;
    unsigned char t2;
    char *t3;
    char *t4;
    unsigned char t5;
    unsigned char t6;
    char *t7;
    char *t8;
    int t9;
    int t10;
    unsigned int t11;
    unsigned int t12;
    unsigned int t13;
    char *t14;
    char *t15;
    char *t16;
    char *t17;
    char *t18;

LAB0:    xsi_set_current_line(27, ng0);
    t1 = (t0 + 568U);
    t2 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t2 != 0)
        goto LAB2;

LAB4:
LAB3:    t1 = (t0 + 1908);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    xsi_set_current_line(28, ng0);
    t3 = (t0 + 684U);
    t4 = *((char **)t3);
    t5 = *((unsigned char *)t4);
    t6 = (t5 == (unsigned char)3);
    if (t6 != 0)
        goto LAB5;

LAB7:    xsi_set_current_line(31, ng0);
    t1 = (t0 + 1052U);
    t3 = *((char **)t1);
    t1 = (t0 + 776U);
    t4 = *((char **)t1);
    t1 = (t0 + 3716U);
    t9 = ieee_p_1242562249_sub_1657552908_1035706684(IEEE_P_1242562249, t4, t1);
    t10 = (t9 - 0);
    t11 = (t10 * 1);
    xsi_vhdl_check_range_of_index(0, 31, 1, t9);
    t12 = (16U * t11);
    t13 = (0 + t12);
    t7 = (t3 + t13);
    t8 = (t0 + 1988);
    t14 = (t8 + 32U);
    t15 = *((char **)t14);
    t16 = (t15 + 40U);
    t17 = *((char **)t16);
    memcpy(t17, t7, 16U);
    xsi_driver_first_trans_fast_port(t8);

LAB6:    goto LAB3;

LAB5:    xsi_set_current_line(29, ng0);
    t3 = (t0 + 868U);
    t7 = *((char **)t3);
    t3 = (t0 + 776U);
    t8 = *((char **)t3);
    t3 = (t0 + 3716U);
    t9 = ieee_p_1242562249_sub_1657552908_1035706684(IEEE_P_1242562249, t8, t3);
    t10 = (t9 - 0);
    t11 = (t10 * 1);
    t12 = (16U * t11);
    t13 = (0U + t12);
    t14 = (t0 + 1952);
    t15 = (t14 + 32U);
    t16 = *((char **)t15);
    t17 = (t16 + 40U);
    t18 = *((char **)t17);
    memcpy(t18, t7, 16U);
    xsi_driver_first_trans_delta(t14, t13, 16U, 0LL);
    goto LAB6;

}

开发者ID:Kadaiser，项目名称:TOC，代码行数:84，代码来源:a_4163910571_0412081955.c

示例17: work_a_2683472623_0318166943_p_2


//.........这里部分代码省略.........
    goto LAB1;

LAB14:    t2 = (t0 + 8040);
    t8 = *((int *)t2);
    t3 = (t0 + 8044);
    t9 = *((int *)t3);
    if (t8 == t9)
        goto LAB15;

LAB44:    t22 = (t8 + 1);
    t8 = t22;
    t4 = (t0 + 8040);
    *((int *)t4) = t8;
    goto LAB12;

LAB16:    t4 = (t0 + 4608);
    *((int *)t4) = 0;
    xsi_set_current_line(76, ng0);
    t2 = (t0 + 4880);
    t3 = (t2 + 56U);
    t4 = *((char **)t3);
    t5 = (t4 + 56U);
    t6 = *((char **)t5);
    *((unsigned char *)t6) = (unsigned char)3;
    xsi_driver_first_trans_fast(t2);
    xsi_set_current_line(77, ng0);

LAB22:    t2 = (t0 + 4624);
    *((int *)t2) = 1;
    *((char **)t1) = &&LAB23;
    goto LAB1;

LAB17:    t3 = (t0 + 992U);
    t18 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t3, 0U, 0U);
    if (t18 == 1)
        goto LAB16;
    else
        goto LAB18;

LAB19:    goto LAB17;

LAB20:    t4 = (t0 + 4624);
    *((int *)t4) = 0;
    xsi_set_current_line(78, ng0);
    t2 = (t0 + 4880);
    t3 = (t2 + 56U);
    t4 = *((char **)t3);
    t5 = (t4 + 56U);
    t6 = *((char **)t5);
    *((unsigned char *)t6) = (unsigned char)2;
    xsi_driver_first_trans_fast(t2);
    xsi_set_current_line(79, ng0);

LAB26:    t2 = (t0 + 4640);
    *((int *)t2) = 1;
    *((char **)t1) = &&LAB27;
    goto LAB1;

LAB21:    t3 = (t0 + 992U);
    t18 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t3, 0U, 0U);
    if (t18 == 1)
        goto LAB20;
    else
        goto LAB22;

LAB23:    goto LAB21;

开发者ID:Kadaiser，项目名称:TOC，代码行数:67，代码来源:a_2683472623_0318166943.c

示例18: work_a_0159862796_3212880686_p_0

static void work_a_0159862796_3212880686_p_0(char *t0)
{
    char t11[16];
    char *t1;
    char *t2;
    unsigned char t3;
    unsigned char t4;
    char *t5;
    char *t6;
    char *t7;
    char *t8;
    char *t9;
    char *t10;
    unsigned int t12;
    unsigned int t13;
    char *t14;
    char *t15;

LAB0:
    xsi_set_current_line(46, ng0);
    t1 = (t0 + 592U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t4 = (t3 == (unsigned char)2);
    if (t4 != 0)
        goto LAB2;

LAB4:
    t1 = (t0 + 660U);
    t3 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB5;

LAB6:
LAB3:
    t1 = (t0 + 1900);
    *((int *)t1) = 1;

LAB1:
    return;
LAB2:
    xsi_set_current_line(47, ng0);
    t1 = xsi_get_transient_memory(4U);
    memset(t1, 0, 4U);
    t5 = t1;
    memset(t5, (unsigned char)2, 4U);
    t6 = (t0 + 1952);
    t7 = (t6 + 32U);
    t8 = *((char **)t7);
    t9 = (t8 + 32U);
    t10 = *((char **)t9);
    memcpy(t10, t1, 4U);
    xsi_driver_first_trans_fast(t6);
    goto LAB3;

LAB5:
    xsi_set_current_line(49, ng0);
    t2 = (t0 + 868U);
    t5 = *((char **)t2);
    t2 = (t0 + 3564U);
    t6 = ieee_p_3620187407_sub_436279890_3965413181(IEEE_P_3620187407, t11, t5, t2, 1);
    t7 = (t11 + 12U);
    t12 = *((unsigned int *)t7);
    t13 = (1U * t12);
    t4 = (4U != t13);
    if (t4 == 1)
        goto LAB7;

LAB8:
    t8 = (t0 + 1952);
    t9 = (t8 + 32U);
    t10 = *((char **)t9);
    t14 = (t10 + 32U);
    t15 = *((char **)t14);
    memcpy(t15, t6, 4U);
    xsi_driver_first_trans_fast(t8);
    goto LAB3;

LAB7:
    xsi_size_not_matching(4U, t13, 0);
    goto LAB8;

}

开发者ID:t2b，项目名称:hgg，代码行数:83，代码来源:a_0159862796_3212880686.c

示例19: unisim_a_1297477671_0429821216_p_0

static void unisim_a_1297477671_0429821216_p_0(char *t0)
{
    char *t1;
    char *t2;
    unsigned char t3;
    unsigned char t4;
    int64 t5;
    char *t6;
    char *t7;
    char *t8;
    char *t9;
    int64 t10;
    int64 t11;
    int64 t12;
    unsigned char t13;
    int64 t14;
    char *t15;
    char *t16;
    char *t17;
    unsigned char t18;
    int t19;
    unsigned char t20;

LAB0:    t1 = (t0 + 868U);
    t2 = *((char **)t1);
    t3 = *((unsigned char *)t2);
    t4 = (t3 == (unsigned char)3);
    if (t4 != 0)
        goto LAB2;

LAB4:    t1 = (t0 + 660U);
    t3 = ieee_p_2592010699_sub_1744673427_503743352(IEEE_P_2592010699, t1, 0U, 0U);
    if (t3 != 0)
        goto LAB5;

LAB6:
LAB3:    t1 = (t0 + 4572);
    *((int *)t1) = 1;

LAB1:    return;
LAB2:    t5 = (0 * 1LL);
    t1 = (t0 + 4680);
    t6 = (t1 + 32U);
    t7 = *((char **)t6);
    t8 = (t7 + 40U);
    t9 = *((char **)t8);
    *((int64 *)t9) = t5;
    xsi_driver_first_trans_fast(t1);
    goto LAB3;

LAB5:    t2 = (t0 + 2396U);
    t6 = *((char **)t2);
    t5 = *((int64 *)t6);
    t2 = (t0 + 2328U);
    t7 = *((char **)t2);
    t2 = (t7 + 0);
    *((int64 *)t2) = t5;
    t5 = xsi_get_sim_current_time();
    t1 = (t0 + 2396U);
    t2 = *((char **)t1);
    t1 = (t2 + 0);
    *((int64 *)t1) = t5;
    t1 = (t0 + 2396U);
    t2 = *((char **)t1);
    t5 = *((int64 *)t2);
    t1 = (t0 + 2328U);
    t6 = *((char **)t1);
    t10 = *((int64 *)t6);
    t11 = (t5 - t10);
    t1 = (t0 + 2464U);
    t7 = *((char **)t1);
    t1 = (t7 + 0);
    *((int64 *)t1) = t11;
    t1 = (t0 + 960U);
    t2 = *((char **)t1);
    t5 = *((int64 *)t2);
    t10 = (0 * 1LL);
    t4 = (t5 != t10);
    if (t4 == 1)
        goto LAB10;

LAB11:    t3 = (unsigned char)0;

LAB12:    if (t3 != 0)
        goto LAB7;

LAB9:    t1 = (t0 + 960U);
    t2 = *((char **)t1);
    t5 = *((int64 *)t2);
    t10 = (0 * 1LL);
    t4 = (t5 != t10);
    if (t4 == 1)
        goto LAB15;

LAB16:    t3 = (unsigned char)0;

LAB17:    if (t3 != 0)
        goto LAB13;

LAB14:    t1 = (t0 + 960U);
//.........这里部分代码省略.........

开发者ID:mdarino，项目名称:LSE_introFPGA，代码行数:101，代码来源:a_1297477671_0429821216.c

示例20: work_a_1874319323_3212880686_p_0

static void work_a_1874319323_3212880686_p_0(char *t0)
{

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ierr函数代码示例发布时间：2022-05-30

C++ ieee_p_2592010699_sub_1690584930_503743352函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17661|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9466|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8061|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8429|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8335|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9195|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8305|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7728|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8274|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7300|2022-11-06

客服电话

电子邮件

C++ ieee_p_2592010699_sub_1744673427_503743352函数代码示例

示例1: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_11

示例2: work_a_3037777339_3212880686_p_2

示例3: work_a_3392787015_3212880686_p_0

示例4: work_a_1310799906_3212880686_p_0

示例5: work_a_3037777339_3212880686_p_1

示例6: work_a_0308195381_2372691052_p_0

示例7: unisim_a_1297477671_0429821216_p_5

示例8: work_a_3307859654_3212880686_p_2

示例9: work_a_3307859654_3212880686_p_1

示例10: unisim_a_1836616293_3089378898_p_1

示例11: work_a_3565583652_3212880686_p_5

示例12: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_6

示例13: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_0

示例14: axi_hdmi_v1_00_a_a_0888816447_3212880686_p_12

示例15: unisim_a_2496767846_3807856483_p_1

示例16: work_a_4163910571_0412081955_p_0

示例17: work_a_2683472623_0318166943_p_2

示例18: work_a_0159862796_3212880686_p_0

示例19: unisim_a_1297477671_0429821216_p_0

示例20: work_a_1874319323_3212880686_p_0

请发表评论

全部评论

上一篇：

下一篇：

微信小程序 转发功能的实现

krishnaik06/Machine-Learning-in-90-days

jebbyk/OSBES-minecraft-bedrock-edition-s

美元符号为什么是“$”

RasmusLindroth/tut: TUI for Mastodon wit

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

微信小程序转发功能的实现