C++ ieee802_1x_notify_port_enabled函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ieee802_1x_notify_port_enabled函数的典型用法代码示例。如果您正苦于以下问题：C++ ieee802_1x_notify_port_enabled函数的具体用法？C++ ieee802_1x_notify_port_enabled怎么用？C++ ieee802_1x_notify_port_enabled使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ieee802_1x_notify_port_enabled函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: handle_deauth

static void handle_deauth(struct hostapd_data *hapd,
			  const struct ieee80211_mgmt *mgmt, size_t len)
{
	struct sta_info *sta;

	if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.deauth)) {
		printf("handle_deauth - too short payload (len=%lu)\n",
		       (unsigned long) len);
		return;
	}

	wpa_printf(MSG_DEBUG, "deauthentication: STA=" MACSTR
		   " reason_code=%d",
		   MAC2STR(mgmt->sa),
		   le_to_host16(mgmt->u.deauth.reason_code));

	sta = ap_get_sta(hapd, mgmt->sa);
	if (sta == NULL) {
		printf("Station " MACSTR " trying to deauthenticate, but it "
		       "is not authenticated.\n", MAC2STR(mgmt->sa));
		return;
	}

	sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
	wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_DISCONNECTED MACSTR,
		MAC2STR(sta->addr));
	wpa_auth_sm_event(sta->wpa_sm, WPA_DEAUTH);
	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
		       HOSTAPD_LEVEL_DEBUG, "deauthenticated");
	mlme_deauthenticate_indication(
		hapd, sta, le_to_host16(mgmt->u.deauth.reason_code));
	sta->acct_terminate_cause = RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
	ap_free_sta(hapd, sta);
}

开发者ID:progloverfan，项目名称:mod-hostapd，代码行数:35，代码来源:ieee802_11.c

示例2: ap_sta_disconnect

void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
		       const u8 *addr, u16 reason)
{

	if (sta == NULL && addr)
		sta = ap_get_sta(hapd, addr);

	if (addr)
		hostapd_drv_sta_deauth(hapd, addr, reason);

	if (sta == NULL)
		return;
	ap_sta_set_authorized(hapd, sta, 0);
	wpa_auth_sm_event(sta->wpa_sm, WPA_DEAUTH);
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
	sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
	wpa_printf(MSG_DEBUG, "%s: reschedule ap_handle_timer timeout "
		   "for " MACSTR " (%d seconds - "
		   "AP_MAX_INACTIVITY_AFTER_DEAUTH)",
		   __func__, MAC2STR(sta->addr),
		   AP_MAX_INACTIVITY_AFTER_DEAUTH);
	eloop_cancel_timeout(ap_handle_timer, hapd, sta);
	eloop_register_timeout(AP_MAX_INACTIVITY_AFTER_DEAUTH, 0,
			       ap_handle_timer, hapd, sta);
	sta->timeout_next = STA_REMOVE;

	sta->deauth_reason = reason;
	sta->flags |= WLAN_STA_PENDING_DEAUTH_CB;
	eloop_cancel_timeout(ap_sta_deauth_cb_timeout, hapd, sta);
	eloop_register_timeout(hapd->iface->drv_flags &
			       WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS ? 2 : 0, 0,
			       ap_sta_deauth_cb_timeout, hapd, sta);
}

开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:33，代码来源:sta_info.c

示例3: rtl871x_del_sta

static int rtl871x_del_sta(struct rtl871x_driver_data *drv, u8 *addr)
{
	struct hostapd_data *hapd = drv->hapd;
	
#if 1
	drv_event_disassoc(hapd, addr);
	
#else

	struct sta_info *sta;

	sta = ap_get_sta(hapd, addr);
	if (sta != NULL) 
	{
		sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
		wpa_auth_sm_event(sta->wpa_sm, WPA_DISASSOC);
		sta->acct_terminate_cause = RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
		ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
		ap_free_sta(hapd, sta);
	}
	else
	{
		wpa_printf(MSG_DEBUG, "Disassociation notification for "
			   "unknown STA " MACSTR, MAC2STR(addr));
	}
#endif

	return 0;
	
}

开发者ID:robertalks，项目名称:hostap，代码行数:30，代码来源:driver_rtw.c

示例4: hostapd_notif_disassoc

void hostapd_notif_disassoc(struct hostapd_data *hapd, const u8 *addr)
{
	struct sta_info *sta;

	if (addr == NULL) {
		/*
		 * This could potentially happen with unexpected event from the
		 * driver wrapper. This was seen at least in one case where the
		 * driver ended up reporting a station mode event while hostapd
		 * was running, so better make sure we stop processing such an
		 * event here.
		 */
		wpa_printf(MSG_DEBUG, "hostapd_notif_disassoc: Skip event "
			   "with no address");
		return;
	}

	hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
		       HOSTAPD_LEVEL_INFO, "disassociated");

	sta = ap_get_sta(hapd, addr);
	if (sta == NULL) {
		wpa_printf(MSG_DEBUG, "Disassociation notification for "
			   "unknown STA " MACSTR, MAC2STR(addr));
		return;
	}

	ap_sta_set_authorized(hapd, sta, 0);
	sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
	wpa_auth_sm_event(sta->wpa_sm, WPA_DISASSOC);
	sta->acct_terminate_cause = RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
	ap_free_sta(hapd, sta);
}

开发者ID:HangRuan，项目名称:wpa_supplicant_android，代码行数:34，代码来源:drv_callbacks.c

示例5: bsd_new_sta

static int
bsd_new_sta(struct bsd_driver_data *drv, u8 addr[IEEE80211_ADDR_LEN])
{
	struct hostapd_data *hapd = drv->hapd;
	struct hostapd_bss_config *conf = hapd->conf;
	struct sta_info *sta;
	struct ieee80211req_wpaie ie;
	int new_assoc, ielen, res;

	hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
		HOSTAPD_LEVEL_INFO, "associated");

	sta = ap_sta_add(hapd, addr);
	if (sta == NULL)
		return -1;
	/*
	 * Fetch and validate any negotiated WPA/RSN parameters.
	 */
	if (conf->wpa) {
		memset(&ie, 0, sizeof(ie));
		memcpy(ie.wpa_macaddr, addr, IEEE80211_ADDR_LEN);
		if (get80211var(drv, IEEE80211_IOC_WPAIE, &ie, sizeof(ie)) < 0) {
			printf("Failed to get WPA/RSN information element.\n");
			return -1;		/* XXX not right */
		}
		ielen = ie.wpa_ie[1];
		if (ielen == 0) {
			printf("No WPA/RSN information element for station!\n");
			return -1;		/* XXX not right */
		}
		ielen += 2;
		if (sta->wpa_sm == NULL)
			sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
							sta->addr);
		if (sta->wpa_sm == NULL) {
			printf("Failed to initialize WPA state machine\n");
			return -1;
		}
		res = wpa_validate_wpa_ie(hapd->wpa_auth, sta->wpa_sm,
					  ie.wpa_ie, ielen, NULL, 0);
		if (res != WPA_IE_OK) {
			printf("WPA/RSN information element rejected? "
				"(res %u)\n", res);
			return -1;
		}
	}

	/*
	 * Now that the internal station state is setup
	 * kick the authenticator into action.
	 */
	new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
	sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
	wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC);
	hostapd_new_assoc_sta(hapd, sta, !new_assoc);
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);
	return 0;
}

开发者ID:Rajeev-Sirasanagandla，项目名称:t80_platform_external，代码行数:58，代码来源:driver_bsd.c

示例6: test_driver_new_sta

static int test_driver_new_sta(struct test_driver_data *drv,
			       struct test_driver_bss *bss, const u8 *addr,
			       const u8 *ie, size_t ielen)
{
	struct hostapd_data *hapd;
	struct sta_info *sta;
	int new_assoc, res;

	hapd = test_driver_get_hapd(drv, bss);
	if (hapd == NULL)
		return -1;

	hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
		HOSTAPD_LEVEL_INFO, "associated");

	sta = ap_get_sta(hapd, addr);
	if (sta) {
		accounting_sta_stop(hapd, sta);
	} else {
		sta = ap_sta_add(hapd, addr);
		if (sta == NULL)
			return -1;
	}
	accounting_sta_get_id(hapd, sta);

	if (hapd->conf->wpa) {
		if (ie == NULL || ielen == 0) {
			printf("test_driver: no IE from STA\n");
			return -1;
		}
		if (sta->wpa_sm == NULL)
			sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
							sta->addr);
		if (sta->wpa_sm == NULL) {
			printf("test_driver: Failed to initialize WPA state "
			       "machine\n");
			return -1;
		}
		res = wpa_validate_wpa_ie(hapd->wpa_auth, sta->wpa_sm,
					  ie, ielen);
		if (res != WPA_IE_OK) {
			printf("WPA/RSN information element rejected? "
			       "(res %u)\n", res);
			return -1;
		}
	}

	new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
	sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
	wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC);

	hostapd_new_assoc_sta(hapd, sta, !new_assoc);

	ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);

	return 0;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:57，代码来源:driver_test.c

示例7: hostapd_notify_assoc_fils_finish

void hostapd_notify_assoc_fils_finish(struct hostapd_data *hapd,
				      struct sta_info *sta)
{
	u16 reply_res = WLAN_STATUS_SUCCESS;
	struct ieee802_11_elems elems;
	u8 buf[IEEE80211_MAX_MMPDU_SIZE], *p = buf;
	int new_assoc;

	wpa_printf(MSG_DEBUG, "%s FILS: Finish association with " MACSTR,
		   __func__, MAC2STR(sta->addr));
	eloop_cancel_timeout(fils_hlp_timeout, hapd, sta);
	if (!sta->fils_pending_assoc_req)
		return;

	ieee802_11_parse_elems(sta->fils_pending_assoc_req,
			       sta->fils_pending_assoc_req_len, &elems, 0);
	if (!elems.fils_session) {
		wpa_printf(MSG_DEBUG, "%s failed to find FILS Session element",
			   __func__);
		return;
	}

	p = hostapd_eid_assoc_fils_session(sta->wpa_sm, p,
					   elems.fils_session,
					   sta->fils_hlp_resp);

	reply_res = hostapd_sta_assoc(hapd, sta->addr,
				      sta->fils_pending_assoc_is_reassoc,
				      WLAN_STATUS_SUCCESS,
				      buf, p - buf);
	ap_sta_set_authorized(hapd, sta, 1);
	new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
	sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
	sta->flags &= ~WLAN_STA_WNM_SLEEP_MODE;
	hostapd_set_sta_flags(hapd, sta);
	wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC_FILS);
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);
	hostapd_new_assoc_sta(hapd, sta, !new_assoc);
	os_free(sta->fils_pending_assoc_req);
	sta->fils_pending_assoc_req = NULL;
	sta->fils_pending_assoc_req_len = 0;
	wpabuf_free(sta->fils_hlp_resp);
	sta->fils_hlp_resp = NULL;
	wpabuf_free(sta->hlp_dhcp_discover);
	sta->hlp_dhcp_discover = NULL;
	fils_hlp_deinit(hapd);

	/*
	 * Remove the station in case transmission of a success response fails
	 * (the STA was added associated to the driver) or if the station was
	 * previously added unassociated.
	 */
	if (reply_res != WLAN_STATUS_SUCCESS || sta->added_unassoc) {
		hostapd_drv_sta_remove(hapd, sta->addr);
		sta->added_unassoc = 0;
	}
}

开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:57，代码来源:drv_callbacks.c

示例8: ap_sta_remove

static int ap_sta_remove(struct hostapd_data *hapd, struct sta_info *sta)
{
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);

	wpa_printf(MSG_DEBUG, "Removing STA " MACSTR " from kernel driver",
		   MAC2STR(sta->addr));
	if (hostapd_drv_sta_remove(hapd, sta->addr) &&
	    sta->flags & WLAN_STA_ASSOC) {
		wpa_printf(MSG_DEBUG, "Could not remove station " MACSTR
			   " from kernel driver.", MAC2STR(sta->addr));
		return -1;
	}
	return 0;
}

开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:14，代码来源:sta_info.c

示例9: ap_sta_remove

static int ap_sta_remove(struct hostapd_data *hapd, struct sta_info *sta)
{
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);

	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "Removing STA " MACSTR
		      " from kernel driver\n", MAC2STR(sta->addr));
	if (hostapd_sta_remove(hapd, sta->addr) &&
	    sta->flags & WLAN_STA_ASSOC) {
		printf("Could not remove station " MACSTR " from kernel "
		       "driver.\n", MAC2STR(sta->addr));
		return -1;
	}
	return 0;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:14，代码来源:sta_info.c

示例10: hostapd_notif_disassoc

void hostapd_notif_disassoc(struct hostapd_data *hapd, const u8 *addr)
{
	struct sta_info *sta;

	if (addr == NULL) {
		/*
		 * This could potentially happen with unexpected event from the
		 * driver wrapper. This was seen at least in one case where the
		 * driver ended up reporting a station mode event while hostapd
		 * was running, so better make sure we stop processing such an
		 * event here.
		 */
		wpa_printf(MSG_DEBUG, "hostapd_notif_disassoc: Skip event "
			   "with no address");
		return;
	}

	hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
		       HOSTAPD_LEVEL_INFO, "disassociated");

	sta = ap_get_sta(hapd, addr);
	if (sta == NULL) {
		wpa_printf(MSG_DEBUG, "Disassociation notification for "
			   "unknown STA " MACSTR, MAC2STR(addr));
		return;
	}

/*
[ALPS00326459][6575JB][BSP Package][6577JB][CTS Verifier 4.1_r2][MT6577_PHONE][changelist 996001]
GROUP JOIN 2 cases fail in Wi-Fi Direct Test
*/	
#if defined(CONFIG_MTK_P2P) || defined(CONFIG_HOTSPOT_MGR_SUPPORT)
	if ((!hapd->conf->ieee802_1x && !hapd->conf->wpa) ||
		sta->auth_alg == WLAN_AUTH_FT) {
		/*
		 * Open, static WEP, or FT protocol; no separate authorization
		 * step.
		 */
		wpa_msg(hapd->msg_ctx, MSG_INFO,
		AP_STA_DISCONNECTED MACSTR, MAC2STR(sta->addr));
	}
#endif /* CONFIG_MTK_P2P || CONFIG_HOTSPOT_MGR_SUPPORT */
	ap_sta_set_authorized(hapd, sta, 0);
	sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
	wpa_auth_sm_event(sta->wpa_sm, WPA_DISASSOC);
	sta->acct_terminate_cause = RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
	ap_free_sta(hapd, sta);
}

开发者ID:Bebooo43，项目名称:android_hardware_mediatek，代码行数:49，代码来源:drv_callbacks.c

示例11: handle_disassoc

static void handle_disassoc(struct hostapd_data *hapd,
			    const struct ieee80211_mgmt *mgmt, size_t len)
{
	struct sta_info *sta;

	if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.disassoc)) {
		printf("handle_disassoc - too short payload (len=%lu)\n",
		       (unsigned long) len);
		return;
	}

	wpa_printf(MSG_DEBUG, "disassocation: STA=" MACSTR " reason_code=%d",
		   MAC2STR(mgmt->sa),
		   le_to_host16(mgmt->u.disassoc.reason_code));

	sta = ap_get_sta(hapd, mgmt->sa);
	if (sta == NULL) {
		printf("Station " MACSTR " trying to disassociate, but it "
		       "is not associated.\n", MAC2STR(mgmt->sa));
		return;
	}

	sta->flags &= ~WLAN_STA_ASSOC;
	wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_DISCONNECTED MACSTR,
		MAC2STR(sta->addr));
	wpa_auth_sm_event(sta->wpa_sm, WPA_DISASSOC);
	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
		       HOSTAPD_LEVEL_INFO, "disassociated");
	sta->acct_terminate_cause = RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
	/* Stop Accounting and IEEE 802.1X sessions, but leave the STA
	 * authenticated. */
	accounting_sta_stop(hapd, sta);
	ieee802_1x_free_station(sta);
	hapd->drv.sta_remove(hapd, sta->addr);

	if (sta->timeout_next == STA_NULLFUNC ||
	    sta->timeout_next == STA_DISASSOC) {
		sta->timeout_next = STA_DEAUTH;
		eloop_cancel_timeout(ap_handle_timer, hapd, sta);
		eloop_register_timeout(AP_DEAUTH_DELAY, 0, ap_handle_timer,
				       hapd, sta);
	}

	mlme_disassociate_indication(
		hapd, sta, le_to_host16(mgmt->u.disassoc.reason_code));
}

开发者ID:progloverfan，项目名称:mod-hostapd，代码行数:47，代码来源:ieee802_11.c

示例12: madwifi_del_sta

static int
madwifi_del_sta(struct madwifi_driver_data *drv, u8 addr[IEEE80211_ADDR_LEN])
{
	struct hostapd_data *hapd = drv->hapd;
	struct sta_info *sta;

	hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
		HOSTAPD_LEVEL_INFO, "disassociated");

	sta = ap_get_sta(hapd, addr);
	if (sta != NULL) {
		sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
		wpa_auth_sm_event(sta->wpa_sm, WPA_DISASSOC);
		sta->acct_terminate_cause = RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
		ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
		ap_free_sta(hapd, sta);
	}
	return 0;
}

开发者ID:Rajeev-Sirasanagandla，项目名称:t80_platform_external，代码行数:19，代码来源:driver_madwifi.c

示例13: madwifi_new_sta

static int
madwifi_new_sta(struct madwifi_driver_data *drv, u8 addr[IEEE80211_ADDR_LEN])
{
	struct hostapd_data *hapd = drv->hapd;
	struct sta_info *sta;
	int new_assoc;

	hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
		HOSTAPD_LEVEL_INFO, "associated");

	sta = ap_get_sta(hapd, addr);
	if (sta) {
		accounting_sta_stop(hapd, sta);
	} else {
		sta = ap_sta_add(hapd, addr);
		if (sta == NULL)
			return -1;
	}

	if (memcmp(addr, drv->acct_mac, ETH_ALEN) == 0) {
		/* Cached accounting data is not valid anymore. */
		memset(drv->acct_mac, 0, ETH_ALEN);
		memset(&drv->acct_data, 0, sizeof(drv->acct_data));
	}
	accounting_sta_get_id(hapd, sta);

	if (hapd->conf->wpa) {
		if (madwifi_process_wpa_ie(drv, sta))
			return -1;
	}

	/*
	 * Now that the internal station state is setup
	 * kick the authenticator into action.
	 */
	new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
	sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
	wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC);
	hostapd_new_assoc_sta(hapd, sta, !new_assoc);
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);
	return 0;
}

开发者ID:smithlei，项目名称:lw_hostap，代码行数:42，代码来源:driver_madwifi.c

示例14: ap_sta_remove

static int ap_sta_remove(struct hostapd_data *hapd, struct sta_info *sta)
{
    ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);

    if (sta->ipaddr)
        hostapd_drv_br_delete_ip_neigh(hapd, 4, (u8 *) &sta->ipaddr);
    ap_sta_ip6addr_del(hapd, sta);

    wpa_printf(MSG_DEBUG, "%s: Removing STA " MACSTR " from kernel driver",
               hapd->conf->iface, MAC2STR(sta->addr));
    if (hostapd_drv_sta_remove(hapd, sta->addr) &&
            sta->flags & WLAN_STA_ASSOC) {
        wpa_printf(MSG_DEBUG, "%s: Could not remove station " MACSTR
                   " from kernel driver",
                   hapd->conf->iface, MAC2STR(sta->addr));
        return -1;
    }
    sta->added_unassoc = 0;
    return 0;
}

开发者ID:ryo，项目名称:netbsd-src，代码行数:20，代码来源:sta_info.c

示例15: hostapd_notif_disassoc

void hostapd_notif_disassoc(struct hostapd_data *hapd, const u8 *addr)
{
	struct sta_info *sta;

	hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
		       HOSTAPD_LEVEL_INFO, "disassociated");

	sta = ap_get_sta(hapd, addr);
	if (sta == NULL) {
		wpa_printf(MSG_DEBUG, "Disassociation notification for "
			   "unknown STA " MACSTR, MAC2STR(addr));
		return;
	}

	sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
	wpa_auth_sm_event(sta->wpa_sm, WPA_DISASSOC);
	sta->acct_terminate_cause = RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
	ap_free_sta(hapd, sta);
}

开发者ID:fgoncalves，项目名称:Ralink-Driver-Hack，代码行数:20，代码来源:drv_callbacks.c

示例16: hostapd_wpa_auth_set_eapol

static void hostapd_wpa_auth_set_eapol(void *ctx, const u8 *addr,
				       wpa_eapol_variable var, int value)
{
	struct hostapd_data *hapd = ctx;
	struct sta_info *sta = ap_get_sta(hapd, addr);
	if (sta == NULL)
		return;
	switch (var) {
	case WPA_EAPOL_portEnabled:
		ieee802_1x_notify_port_enabled(sta->eapol_sm, value);
		break;
	case WPA_EAPOL_portValid:
		ieee802_1x_notify_port_valid(sta->eapol_sm, value);
		break;
	case WPA_EAPOL_authorized:
		ieee802_1x_set_sta_authorized(hapd, sta, value);
		break;
	case WPA_EAPOL_portControl_Auto:
		if (sta->eapol_sm)
			sta->eapol_sm->portControl = Auto;
		break;
	case WPA_EAPOL_keyRun:
		if (sta->eapol_sm)
			sta->eapol_sm->keyRun = value ? TRUE : FALSE;
		break;
	case WPA_EAPOL_keyAvailable:
		if (sta->eapol_sm)
			sta->eapol_sm->eap_if->eapKeyAvailable =
				value ? TRUE : FALSE;
		break;
	case WPA_EAPOL_keyDone:
		if (sta->eapol_sm)
			sta->eapol_sm->keyDone = value ? TRUE : FALSE;
		break;
	case WPA_EAPOL_inc_EapolFramesTx:
		if (sta->eapol_sm)
			sta->eapol_sm->dot1xAuthEapolFramesTx++;
		break;
	}
}

开发者ID:09sea98，项目名称:rtl8188eu，代码行数:40，代码来源:wpa_auth_glue.c

示例17: test_driver_disassoc

static void test_driver_disassoc(struct test_driver_data *drv,
				 struct sockaddr_un *from, socklen_t fromlen)
{
	struct test_client_socket *cli;
	struct sta_info *sta;

	cli = test_driver_get_cli(drv, from, fromlen);
	if (!cli)
		return;

	hostapd_logger(drv->hapd, cli->addr, HOSTAPD_MODULE_IEEE80211,
		       HOSTAPD_LEVEL_INFO, "disassociated");

	sta = ap_get_sta(drv->hapd, cli->addr);
	if (sta != NULL) {
		sta->flags &= ~WLAN_STA_ASSOC;
		wpa_auth_sm_event(sta->wpa_sm, WPA_DISASSOC);
		sta->acct_terminate_cause =
			RADIUS_ACCT_TERMINATE_CAUSE_USER_REQUEST;
		ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
		ap_free_sta(drv->hapd, sta);
	}
}

开发者ID:AhmadTux，项目名称:DragonFlyBSD，代码行数:23，代码来源:driver_test.c

示例18: ap_handle_timer


//.........这里部分代码省略.........
				"inactive too long: %d sec, max allowed: %d",
				MAC2STR(sta->addr), inactive_sec,
				hapd->conf->ap_max_inactivity);

			if (hapd->conf->skip_inactivity_poll)
				sta->timeout_next = STA_DISASSOC;
		}
	}

	if ((sta->flags & WLAN_STA_ASSOC) &&
	    sta->timeout_next == STA_DISASSOC &&
	    !(sta->flags & WLAN_STA_PENDING_POLL) &&
	    !hapd->conf->skip_inactivity_poll) {
		wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR
			" has ACKed data poll", MAC2STR(sta->addr));
		/* data nullfunc frame poll did not produce TX errors; assume
		 * station ACKed it */
		sta->timeout_next = STA_NULLFUNC;
		next_time = hapd->conf->ap_max_inactivity;
	}

	if (next_time) {
		wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
			   "for " MACSTR " (%lu seconds)",
			   __func__, MAC2STR(sta->addr), next_time);
		eloop_register_timeout(next_time, 0, ap_handle_timer, hapd,
				       sta);
		return;
	}

	if (sta->timeout_next == STA_NULLFUNC &&
	    (sta->flags & WLAN_STA_ASSOC)) {
		wpa_printf(MSG_DEBUG, "  Polling STA");
		sta->flags |= WLAN_STA_PENDING_POLL;
		hostapd_drv_poll_client(hapd, hapd->own_addr, sta->addr,
					sta->flags & WLAN_STA_WMM);
	} else if (sta->timeout_next != STA_REMOVE) {
		int deauth = sta->timeout_next == STA_DEAUTH;

		wpa_dbg(hapd->msg_ctx, MSG_DEBUG,
			"Timeout, sending %s info to STA " MACSTR,
			deauth ? "deauthentication" : "disassociation",
			MAC2STR(sta->addr));

		if (deauth) {
			hostapd_drv_sta_deauth(
				hapd, sta->addr,
				WLAN_REASON_PREV_AUTH_NOT_VALID);
		} else {
			hostapd_drv_sta_disassoc(
				hapd, sta->addr,
				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
		}
	}

	switch (sta->timeout_next) {
	case STA_NULLFUNC:
		sta->timeout_next = STA_DISASSOC;
		wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
			   "for " MACSTR " (%d seconds - AP_DISASSOC_DELAY)",
			   __func__, MAC2STR(sta->addr), AP_DISASSOC_DELAY);
		eloop_register_timeout(AP_DISASSOC_DELAY, 0, ap_handle_timer,
				       hapd, sta);
		break;
	case STA_DISASSOC:
		ap_sta_set_authorized(hapd, sta, 0);
		sta->flags &= ~WLAN_STA_ASSOC;
		ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
		if (!sta->acct_terminate_cause)
			sta->acct_terminate_cause =
				RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
		accounting_sta_stop(hapd, sta);
		ieee802_1x_free_station(sta);
		hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
			       HOSTAPD_LEVEL_INFO, "disassociated due to "
			       "inactivity");
		sta->timeout_next = STA_DEAUTH;
		wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
			   "for " MACSTR " (%d seconds - AP_DEAUTH_DELAY)",
			   __func__, MAC2STR(sta->addr), AP_DEAUTH_DELAY);
		eloop_register_timeout(AP_DEAUTH_DELAY, 0, ap_handle_timer,
				       hapd, sta);
		mlme_disassociate_indication(
			hapd, sta, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
		break;
	case STA_DEAUTH:
	case STA_REMOVE:
		hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
			       HOSTAPD_LEVEL_INFO, "deauthenticated due to "
			       "inactivity (timer DEAUTH/REMOVE)");
		if (!sta->acct_terminate_cause)
			sta->acct_terminate_cause =
				RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
		mlme_deauthenticate_indication(
			hapd, sta,
			WLAN_REASON_PREV_AUTH_NOT_VALID);
		ap_free_sta(hapd, sta);
		break;
	}
}

开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:101，代码来源:sta_info.c

示例19: hostapd_notif_assoc


//.........这里部分代码省略.........
			sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
							sta->addr);
		if (sta->wpa_sm == NULL) {
			wpa_printf(MSG_ERROR, "Failed to initialize WPA state "
				   "machine");
			return -1;
		}
		res = wpa_validate_wpa_ie(hapd->wpa_auth, sta->wpa_sm,
					  ie, ielen,
					  elems.mdie, elems.mdie_len);
		if (res != WPA_IE_OK) {
			wpa_printf(MSG_DEBUG, "WPA/RSN information element "
				   "rejected? (res %u)", res);
			wpa_hexdump(MSG_DEBUG, "IE", ie, ielen);
			if (res == WPA_INVALID_GROUP)
				resp = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
			else if (res == WPA_INVALID_PAIRWISE)
				resp = WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID;
			else if (res == WPA_INVALID_AKMP)
				resp = WLAN_REASON_AKMP_NOT_VALID;
#ifdef CONFIG_IEEE80211W
			else if (res == WPA_MGMT_FRAME_PROTECTION_VIOLATION)
				resp = WLAN_REASON_INVALID_IE;
			else if (res == WPA_INVALID_MGMT_GROUP_CIPHER)
				resp = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
#endif /* CONFIG_IEEE80211W */
			else
				resp = WLAN_REASON_INVALID_IE;
			goto fail;
		}
#ifdef CONFIG_IEEE80211R
		if (sta->auth_alg == WLAN_AUTH_FT) {
			resp = wpa_ft_validate_reassoc(sta->wpa_sm, req_ies,
						       req_ies_len);
			if (resp != WLAN_STATUS_SUCCESS)
				goto fail;
		}
#endif /* CONFIG_IEEE80211R */
	} else if (hapd->conf->wps_state) {
			struct wpabuf *wps;
			wps = ieee802_11_vendor_ie_concat(ie, ielen,
							  WPS_IE_VENDOR_TYPE);
#ifdef CONFIG_WPS_STRICT
		if (ie) {
			if (wps && wps_validate_assoc_req(wps) < 0) {
				resp = WLAN_REASON_INVALID_IE;
				wpabuf_free(wps);
				goto fail;
			}
		}
#endif /* CONFIG_WPS_STRICT */
		if (ie && ielen > 4 && ie[0] == 0xdd && ie[1] >= 4 &&
		    os_memcmp(ie + 2, "\x00\x50\xf2\x04", 4) == 0) {
			sta->flags |= WLAN_STA_WPS;
			if (wps && wps_is_20(wps)) {
				wpa_printf(MSG_DEBUG, "WPS: STA supports "
					    "WPS 2.0");
				sta->flags |= WLAN_STA_WPS2;
			}
		} else
			sta->flags |= WLAN_STA_MAYBE_WPS;
			wpabuf_free(wps);
	}
skip_wpa_check:

#ifdef CONFIG_IEEE80211R
	p = wpa_sm_write_assoc_resp_ies(sta->wpa_sm, buf, sizeof(buf),
					sta->auth_alg, req_ies, req_ies_len);
	len = p - buf;

	hostapd_sta_assoc(hapd, addr, reassoc, 0, buf, len);
#endif /* CONFIG_IEEE80211R */

	new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
	sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;

	if (reassoc && (sta->auth_alg == WLAN_AUTH_FT))
		wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC_FT);
	else
		wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC);

	hostapd_new_assoc_sta(hapd, sta, !new_assoc);

	ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);

#ifdef CONFIG_P2P
	p2p_group_notif_assoc(hapd->p2p_group, sta->addr,
			      req_ies, req_ies_len);
#endif /* CONFIG_P2P */

	return 0;

fail:
#ifdef CONFIG_IEEE80211R
	hostapd_sta_assoc(hapd, addr, reassoc, resp, buf, len);
#endif /* CONFIG_IEEE80211R */
	hostapd_drv_sta_disassoc(hapd, sta->addr, resp);
	ap_free_sta(hapd, sta);
	return -1;
}

开发者ID:springware，项目名称:92u10，代码行数:101，代码来源:drv_callbacks.c

示例20: hostapd_notif_assoc


//.........这里部分代码省略.........
	if (elems.wps_ie) {
		ie = elems.wps_ie - 2;
		ielen = elems.wps_ie_len + 2;
		wpa_printf(MSG_DEBUG, "STA included WPS IE in (Re)AssocReq");
	} else if (elems.rsn_ie) {
		ie = elems.rsn_ie - 2;
		ielen = elems.rsn_ie_len + 2;
		wpa_printf(MSG_DEBUG, "STA included RSN IE in (Re)AssocReq");
	} else if (elems.wpa_ie) {
		ie = elems.wpa_ie - 2;
		ielen = elems.wpa_ie_len + 2;
		wpa_printf(MSG_DEBUG, "STA included WPA IE in (Re)AssocReq");
	} else {
		ie = NULL;
		ielen = 0;
		wpa_printf(MSG_DEBUG, "STA did not include WPS/RSN/WPA IE in "
			   "(Re)AssocReq");
	}

	sta = ap_get_sta(hapd, addr);
	if (sta) {
		accounting_sta_stop(hapd, sta);
	} else {
		sta = ap_sta_add(hapd, addr);
		if (sta == NULL)
			return -1;
	}
	sta->flags &= ~(WLAN_STA_WPS | WLAN_STA_MAYBE_WPS);

	if (hapd->conf->wpa) {
		if (ie == NULL || ielen == 0) {
			if (hapd->conf->wps_state) {
				wpa_printf(MSG_DEBUG, "STA did not include "
					   "WPA/RSN IE in (Re)Association "
					   "Request - possible WPS use");
				sta->flags |= WLAN_STA_MAYBE_WPS;
				goto skip_wpa_check;
			}

			wpa_printf(MSG_DEBUG, "No WPA/RSN IE from STA");
			return -1;
		}
		if (hapd->conf->wps_state && ie[0] == 0xdd && ie[1] >= 4 &&
		    os_memcmp(ie + 2, "\x00\x50\xf2\x04", 4) == 0) {
			sta->flags |= WLAN_STA_WPS;
			goto skip_wpa_check;
		}

		if (sta->wpa_sm == NULL)
			sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
							sta->addr);
		if (sta->wpa_sm == NULL) {
			wpa_printf(MSG_ERROR, "Failed to initialize WPA state "
				   "machine");
			return -1;
		}
		res = wpa_validate_wpa_ie(hapd->wpa_auth, sta->wpa_sm,
					  ie, ielen, NULL, 0);
		if (res != WPA_IE_OK) {
			int resp;
			wpa_printf(MSG_DEBUG, "WPA/RSN information element "
				   "rejected? (res %u)", res);
			wpa_hexdump(MSG_DEBUG, "IE", ie, ielen);
			if (res == WPA_INVALID_GROUP)
				resp = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
			else if (res == WPA_INVALID_PAIRWISE)
				resp = WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID;
			else if (res == WPA_INVALID_AKMP)
				resp = WLAN_REASON_AKMP_NOT_VALID;
#ifdef CONFIG_IEEE80211W
			else if (res == WPA_MGMT_FRAME_PROTECTION_VIOLATION)
				resp = WLAN_REASON_INVALID_IE;
			else if (res == WPA_INVALID_MGMT_GROUP_CIPHER)
				resp = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
#endif /* CONFIG_IEEE80211W */
			else
				resp = WLAN_REASON_INVALID_IE;
			hapd->drv.sta_disassoc(hapd, sta->addr, resp);
			ap_free_sta(hapd, sta);
			return -1;
		}
	} else if (hapd->conf->wps_state) {
		if (ie && ielen > 4 && ie[0] == 0xdd && ie[1] >= 4 &&
		    os_memcmp(ie + 2, "\x00\x50\xf2\x04", 4) == 0) {
			sta->flags |= WLAN_STA_WPS;
		} else
			sta->flags |= WLAN_STA_MAYBE_WPS;
	}
skip_wpa_check:

	new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
	sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
	wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC);

	hostapd_new_assoc_sta(hapd, sta, !new_assoc);

	ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);

	return 0;
}

开发者ID:2014-class，项目名称:freerouter，代码行数:101，代码来源:drv_callbacks.c

注：本文中的ieee802_1x_notify_port_enabled函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ieee_p_2592010699_sub_1605435078_503743352函数代码示例发布时间：2022-05-30

C++ ieee80211_unregister_hw函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19234|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9668|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ ieee802_1x_notify_port_enabled函数代码示例

示例1: handle_deauth

示例2: ap_sta_disconnect

示例3: rtl871x_del_sta

示例4: hostapd_notif_disassoc

示例5: bsd_new_sta

示例6: test_driver_new_sta

示例7: hostapd_notify_assoc_fils_finish

示例8: ap_sta_remove

示例9: ap_sta_remove

示例10: hostapd_notif_disassoc

示例11: handle_disassoc

示例12: madwifi_del_sta

示例13: madwifi_new_sta

示例14: ap_sta_remove

示例15: hostapd_notif_disassoc

示例16: hostapd_wpa_auth_set_eapol

示例17: test_driver_disassoc

示例18: ap_handle_timer

示例19: hostapd_notif_assoc

示例20: hostapd_notif_assoc

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

bitwiseshiftleft/sjcl: Stanford Javascri

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053