C++ ieee80211_free_node函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ieee80211_free_node函数的典型用法代码示例。如果您正苦于以下问题：C++ ieee80211_free_node函数的具体用法？C++ ieee80211_free_node怎么用？C++ ieee80211_free_node使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ieee80211_free_node函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ieee80211_crypto_handle_keymiss

int ieee80211_crypto_handle_keymiss(struct ieee80211com *ic,
                                    wbuf_t wbuf,
                                    struct ieee80211_rx_status *rs)
{
    struct ieee80211_node *ni = NULL;

    /*   
     * Handle packets with keycache miss
     */
    if ((rs->rs_flags & IEEE80211_RX_KEYMISS)) {
        ni = ieee80211_find_rxnode(ic,
                (const struct ieee80211_frame_min *) wbuf_header(wbuf));

        if( ni != NULL) {
            struct ieee80211vap *vap = ni->ni_vap;

            ieee80211_key_update_begin(vap);
            if (!ieee80211_crypto_keymiss(ni, wbuf, rs)) {
	            IEEE80211_DPRINTF(vap, IEEE80211_MSG_CRYPTO, "%s: Couldn't decrypt, dropping packet.\n",
                                             __func__);
                wbuf_free(wbuf);
                ieee80211_key_update_end(vap);
                ieee80211_free_node(ni); 	
                return 1;
            }else {
                ieee80211_key_update_end(vap);
                ieee80211_free_node(ni);
            }
        }
    }
	return 0;
}

开发者ID:jorneytu，项目名称:wlan，代码行数:32，代码来源:ieee80211_crypto_wep_mbssid.c

示例2: wlan_send_probereq

int wlan_send_probereq(
    wlan_if_t       vaphandle,
    const u_int8_t  *destination,
    const u_int8_t  *bssid,
    const u_int8_t  *ssid, 
    const u_int32_t ssidlen,
    const void      *optie, 
    const size_t    optielen)
{
    struct ieee80211vap     *vap = vaphandle;
    struct ieee80211_node   *bss_node;
    int                     err;

    bss_node = ieee80211_ref_bss_node(vap);
    err = ieee80211_send_probereq(bss_node,
                                  vaphandle->iv_myaddr,
                                  destination,
                                  bssid,
                                  ssid,
                                  ssidlen,
                                  optie,
                                  optielen);

    ieee80211_free_node(bss_node);

    return err;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:27，代码来源:ieee80211_vap.c

示例3: rtwn_pci_reset_tx_ring_stopped

static void
rtwn_pci_reset_tx_ring_stopped(struct rtwn_softc *sc, int qid)
{
	struct rtwn_pci_softc *pc = RTWN_PCI_SOFTC(sc);
	struct rtwn_tx_ring *ring = &pc->tx_ring[qid];
	int i;

	for (i = 0; i < RTWN_PCI_TX_LIST_COUNT; i++) {
		struct rtwn_tx_data *data = &ring->tx_data[i];
		void *desc = (uint8_t *)ring->desc + sc->txdesc_len * i;

		rtwn_pci_copy_tx_desc(pc, desc, NULL);

		if (data->m != NULL) {
			bus_dmamap_sync(ring->data_dmat, data->map,
			    BUS_DMASYNC_POSTWRITE);
			bus_dmamap_unload(ring->data_dmat, data->map);
			m_freem(data->m);
			data->m = NULL;
		}
		if (data->ni != NULL) {
			ieee80211_free_node(data->ni);
			data->ni = NULL;
		}
	}

	bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
	    BUS_DMASYNC_POSTWRITE);

	sc->qfullmsk &= ~(1 << qid);
	ring->queued = 0;
	ring->last = ring->cur = 0;
}

开发者ID:mulichao，项目名称:freebsd，代码行数:33，代码来源:rtwn_pci_attach.c

示例4: wlan_btamp_conn_sm_delete

void wlan_btamp_conn_sm_delete(wlan_btamp_conn_sm_t handle)
{
    wlan_btamp_conn_sm_t     smhandle = (wlan_btamp_conn_sm_t)handle;
    struct ieee80211vap      *vap = NULL;
    struct ieee80211_node    *ni = NULL;

    if (!smhandle)
        return;

    vap = smhandle->vap_handle;

    if (smhandle->is_running) {
        IEEE80211_DPRINTF(smhandle->vap_handle, IEEE80211_MSG_STATE,
                          "%s: Deleting state machine while it is still runing \n", __func__); 
    }
    ASSERT(! smhandle->is_running);
    
    OS_CANCEL_TIMER(&(smhandle->sm_timer));
    OS_FREE_TIMER(&(smhandle->sm_timer));

    ieee80211_sm_delete(smhandle->hsm_handle);

    /* Delete node for the peer mac address */
    ni = ieee80211_vap_find_node(vap, smhandle->peer);
    if (ni) {
        IEEE80211_NODE_LEAVE(ni);
        ieee80211_free_node(ni); /* Decrement the extra ref count from find */
    }

    OS_FREE(smhandle);
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:31，代码来源:ieee80211_btamp_conn_sm.c

示例5: sm_assoc_indication

static void sm_assoc_indication(os_handle_t osif, u_int8_t *macaddr, u_int16_t result,
                                wbuf_t wbuf, wbuf_t resp_wbuf)
{
    wlan_btamp_conn_sm_t     sm;
    struct ieee80211vap      *vap = NULL;
    struct ieee80211_node    *ni = NULL;

    sm = ieee80211_btamp_get_smhandle((wlan_btamp_conn_sm_t *)osif, macaddr,
                                      IEEE80211_BTAMP_CONN_STATE_ASSOC); 
    if (!sm || sm->is_stop_requested) {
        return;
    }

    vap = sm->vap_handle;
    ni = ieee80211_vap_find_node(vap, sm->peer);
    if (ni) {
       ni->ni_assocstatus = result;
       ieee80211_free_node(ni);
    }

    if (result == IEEE80211_STATUS_SUCCESS) {
        ieee80211_sm_dispatch(sm->hsm_handle,IEEE80211_BTAMP_CONN_EVENT_ASSOC_SUCCESS, 0, NULL);
    } else {
        ieee80211_sm_dispatch(sm->hsm_handle,IEEE80211_BTAMP_CONN_EVENT_ASSOC_FAIL, 0, NULL);
    }
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:26，代码来源:ieee80211_btamp_conn_sm.c

示例6: ieee80211_flush_ifq

void
ieee80211_flush_ifq(struct ifqueue* ifq, struct ieee80211vap* vap)
{
	struct ieee80211_node* ni;
	struct mbuf* m;
	struct mbuf** mprev;

	IF_LOCK(ifq);
	mprev = &ifq->ifq_head;
	while ((m = *mprev) != NULL) {
		ni = (struct ieee80211_node*)m->m_pkthdr.rcvif;
		if (ni != NULL && ni->ni_vap == vap) {
			*mprev = m->m_nextpkt;
				// remove from list
			ifq->ifq_len--;

			m_freem(m);
			ieee80211_free_node(ni);
				// reclaim ref
		} else
			mprev = &m->m_nextpkt;
	}
	// recalculate tail ptr
	m = ifq->ifq_head;
	for (; m != NULL && m->m_nextpkt != NULL; m = m->m_nextpkt);
	ifq->ifq_tail = m;
	IF_UNLOCK(ifq);
}

开发者ID:sahil9912，项目名称:haiku，代码行数:28，代码来源:ieee80211_haiku.cpp

示例7: ieee80211_mlme_recv_disassoc

void ieee80211_mlme_recv_disassoc(struct ieee80211_node *ni, u_int32_t reason_code)
{
    struct ieee80211vap    *vap = ni->ni_vap;
#if (UMAC_SUPPORT_TDLS == 1) && (ATH_TDLS_AUTO_CONNECT == 1)
    struct ieee80211com           *ic = vap->iv_ic;
    ic->ic_tdls_clean(vap);
#endif

    IEEE80211_DPRINTF(vap, IEEE80211_MSG_MLME, "%s\n", __func__);

    switch(vap->iv_opmode) {
    case IEEE80211_M_HOSTAP:
    case IEEE80211_M_BTAMP:
        if (ni != vap->iv_bss) {
#if ATH_SUPPORT_AOW
        ieee80211_aow_join_indicate(ni->ni_ic, AOW_STA_DISCONNECTED, ni);
#endif  /* ATH_SUPPORT_AOW */
            ieee80211_ref_node(ni);
            if(IEEE80211_NODE_LEAVE(ni)) {
                /* Call MLME indication handler if node is in associated state */
                IEEE80211_DELIVER_EVENT_MLME_DISASSOC_INDICATION(vap, ni->ni_macaddr, reason_code);
            }
            ieee80211_free_node(ni);
        }
        uranus_report_wireless_event(ni->ni_vap, ni, WEVENT_AUTH_STATUS_DEASSOC);
        break;
    default:
        /* Call MLME indication handler */
        IEEE80211_DELIVER_EVENT_MLME_DISASSOC_INDICATION(vap, ni->ni_macaddr, reason_code);
    }
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:31，代码来源:ieee80211_mlme.c

示例8: rtwn_usb_reset_tx_list

static void
rtwn_usb_reset_tx_list(struct rtwn_usb_softc *uc,
    rtwn_datahead *head, struct ieee80211vap *vap)
{
	struct rtwn_vap *uvp = RTWN_VAP(vap);
	struct rtwn_data *dp, *tmp;
	int id;

	id = (uvp != NULL ? uvp->id : RTWN_VAP_ID_INVALID);

	STAILQ_FOREACH_SAFE(dp, head, next, tmp) {
		if (vap == NULL || (dp->ni == NULL &&
		    (dp->id == id || id == RTWN_VAP_ID_INVALID)) ||
		    (dp->ni != NULL && dp->ni->ni_vap == vap)) {
			if (dp->ni != NULL) {
				ieee80211_free_node(dp->ni);
				dp->ni = NULL;
			}

			if (dp->m != NULL) {
				m_freem(dp->m);
				dp->m = NULL;
			}

			STAILQ_REMOVE(head, dp, rtwn_data, next);
			STAILQ_INSERT_TAIL(&uc->uc_tx_inactive, dp, next);
		}
	}
}

开发者ID:2trill2spill，项目名称:freebsd，代码行数:29，代码来源:rtwn_usb_attach.c

示例9: ieee80211_clean_nodes

/*
 * Timeout inactive nodes.
 */
void Voodoo80211Device::
ieee80211_clean_nodes(struct ieee80211com *ic)
{
	struct ieee80211_node *ni, *next_ni;
	u_int gen = ic->ic_scangen++;		/* NB: ok 'cuz single-threaded*/
	int s;
    
	s = splnet();
	for (ni = RB_MIN(ieee80211_tree, &ic->ic_tree);
         ni != NULL; ni = next_ni) {
		next_ni = RB_NEXT(ieee80211_tree, &ic->ic_tree, ni);
		if (ic->ic_nnodes < ic->ic_max_nnodes)
			break;
		if (ni->ni_scangen == gen)	/* previously handled */
			continue;
		ni->ni_scangen = gen;
		if (ni->ni_refcnt > 0)
			continue;
		DPRINTF(("station %s purged from LRU cache\n",
                 ether_sprintf(ni->ni_macaddr)));
		/*
		 * Send a deauthenticate frame.
		 */
			ieee80211_free_node(ic, ni);
		ic->ic_stats.is_node_timeout++;
	}
	splx(s);
}

开发者ID:mercurysquad，项目名称:Voodoo80211，代码行数:31，代码来源:ieee80211_node.cpp

示例10: r92c_init_ra

static void
r92c_init_ra(struct rtwn_softc *sc, int macid)
{
	struct ieee80211_htrateset *rs_ht;
	struct ieee80211_node *ni;
	uint32_t rates;
	int maxrate;

	RTWN_NT_LOCK(sc);
	if (sc->node_list[macid] == NULL) {
		RTWN_DPRINTF(sc, RTWN_DEBUG_RA, "%s: macid %d, ni is NULL\n",
		    __func__, macid);
		RTWN_NT_UNLOCK(sc);
		return;
	}

	ni = ieee80211_ref_node(sc->node_list[macid]);
	if (ni->ni_flags & IEEE80211_NODE_HT)
		rs_ht = &ni->ni_htrates;
	else
		rs_ht = NULL;
	/* XXX MACID_BC */
	rtwn_get_rates(sc, &ni->ni_rates, rs_ht, &rates, &maxrate, 0);
	RTWN_NT_UNLOCK(sc);

#ifndef RTWN_WITHOUT_UCODE
	if (sc->sc_ratectl == RTWN_RATECTL_FW) {
		r92c_send_ra_cmd(sc, macid, rates, maxrate);
	}
#endif

	rtwn_write_1(sc, R92C_INIDATA_RATE_SEL(macid), maxrate);

	ieee80211_free_node(ni);
}

开发者ID:jaredmcneill，项目名称:freebsd，代码行数:35，代码来源:r92c_fw.c

示例11: ath_net80211_uapsd_retqosnullframe

void ath_net80211_uapsd_retqosnullframe(ieee80211_node_t node, wbuf_t wbuf)
{
    struct ieee80211_node *ni;

    ni = (struct ieee80211_node *)node;

    /* Release the node refcnt that was acquired in ath_net80211_uapsd_getqosnullframe() */
    ieee80211_free_node(ni);
}

开发者ID:jorneytu，项目名称:wlan，代码行数:9，代码来源:if_ath_uapsd.c

示例12: ageq_mfree

/*
 * Free an mbuf according to ageq rules: if marked as holding
 * and 802.11 frame then also reclaim a node reference from
 * the packet header; this handles packets q'd in the tx path.
 */
static void
ageq_mfree(struct mbuf *m)
{
	if (m->m_flags & M_ENCAP) {
		struct ieee80211_node *ni = (void *) m->m_pkthdr.rcvif;
		ieee80211_free_node(ni);
	}
	m->m_nextpkt = NULL;
	m_freem(m);
}

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:15，代码来源:ieee80211_ageq.c

示例13: wlan_getrssi

int wlan_getrssi(wlan_if_t vaphandle, wlan_rssi_info *rssi_info, u_int32_t flags)
{
    struct ieee80211vap   *vap = vaphandle;
    struct ieee80211_node *bss_node; 
    int err;

    bss_node = ieee80211_ref_bss_node(vap);
    err =  wlan_node_getrssi(bss_node,rssi_info,flags);
    ieee80211_free_node(bss_node);
    return err;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:11，代码来源:ieee80211_vap.c

示例14: wlan_get_txrate_info

int wlan_get_txrate_info(wlan_if_t vaphandle, ieee80211_rate_info *rate_info)
{ 
    struct ieee80211vap     *vap = vaphandle;
    struct ieee80211_node   *bss_node ; 
    int err;

    bss_node = ieee80211_ref_bss_node(vap);
    err =  wlan_node_txrate_info(bss_node,rate_info);
    ieee80211_free_node(bss_node);
    return err;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:11，代码来源:ieee80211_vap.c

示例15: rtwn_drain_mbufq

void
rtwn_drain_mbufq(struct rtwn_softc *sc)
{
	struct mbuf *m;
	struct ieee80211_node *ni;
	RTWN_ASSERT_LOCKED(sc);
	while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
		ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
		m->m_pkthdr.rcvif = NULL;
		ieee80211_free_node(ni);
		m_freem(m);
	}
}

开发者ID:jaredmcneill，项目名称:freebsd，代码行数:13，代码来源:if_rtwn_tx.c

示例16: ieee80211_release_node

void
ieee80211_release_node(struct ieee80211com *ic, struct ieee80211_node *ni)
{
	int s;

	DPRINTF(("%s refcnt %u\n", ether_sprintf(ni->ni_macaddr),
	    ni->ni_refcnt));
	s = splnet();
	if (ieee80211_node_decref(ni) == 0 &&
	    ni->ni_state == IEEE80211_STA_COLLECT) {
		ieee80211_free_node(ic, ni);
	}
	splx(s);
}

开发者ID:SylvestreG，项目名称:bitrig，代码行数:14，代码来源:ieee80211_node.c

示例17: ath_handle_micerror

static void
ath_handle_micerror(struct ieee80211com *ic,
	struct ieee80211_frame *wh, int keyix)
{
	struct ieee80211_node *ni;

	/* XXX recheck MIC to deal w/ chips that lie */
	/* XXX discard MIC errors on !data frames */
	ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh);
	if (ni != NULL) {
		ieee80211_notify_michael_failure(ni->ni_vap, wh, keyix);
		ieee80211_free_node(ni);
	}
}

开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:14，代码来源:if_ath_rx.c

示例18: ieee80211_free_allnodes

void
ieee80211_free_allnodes(struct ieee80211com *ic)
{
	struct ieee80211_node *ni;
	int s;

	DPRINTF(("freeing all nodes\n"));
	s = splnet();
	while ((ni = RB_MIN(ieee80211_tree, &ic->ic_tree)) != NULL)
		ieee80211_free_node(ic, ni);
	splx(s);

	if (ic->ic_bss != NULL)
		ieee80211_node_cleanup(ic, ic->ic_bss);	/* for station mode */
}

开发者ID:SylvestreG，项目名称:bitrig，代码行数:15，代码来源:ieee80211_node.c

示例19: wlan_add_sta_node

int wlan_add_sta_node(wlan_if_t vap, const u_int8_t *macaddr, u_int16_t auth_alg)
{
    struct ieee80211_node *ni;

    ni = ieee80211_vap_find_node(vap, macaddr);
    if (ni == NULL) {
        ni = ieee80211_dup_bss(vap, macaddr);
    }

    if (ni == NULL) {
        return -ENOMEM;
    }
    /* claim node immediately */
    ieee80211_free_node(ni);
    return 0;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:16，代码来源:ieee80211_node_ap.c

示例20: wmi_peer_sta_kickout_event_handler

static int
wmi_peer_sta_kickout_event_handler(ol_scn_t scn, u_int8_t *data, u_int16_t datalen, void *context)
{
    struct ieee80211com *ic = &scn->sc_ic;
    A_UINT8 peer_macaddr[ATH_MAC_LEN];
    struct ieee80211_node *ni;
    wmi_peer_sta_kickout_event *kickout_event = (wmi_peer_sta_kickout_event *)data;
    WMI_MAC_ADDR_TO_CHAR_ARRAY(&kickout_event->peer_macaddr,peer_macaddr);
    ni = ieee80211_find_node(&ic->ic_sta, peer_macaddr);
    if (!ni) {
        return -1;
    }
    ieee80211_kick_node(ni);
    ieee80211_free_node(ni);
    return 0;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:16，代码来源:ol_if_node.c

注：本文中的ieee80211_free_node函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ieee80211_unregister_hw函数代码示例发布时间：2022-05-30

C++ ieee80211_free_hw函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19234|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9668|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ ieee80211_free_node函数代码示例

示例1: ieee80211_crypto_handle_keymiss

示例2: wlan_send_probereq

示例3: rtwn_pci_reset_tx_ring_stopped

示例4: wlan_btamp_conn_sm_delete

示例5: sm_assoc_indication

示例6: ieee80211_flush_ifq

示例7: ieee80211_mlme_recv_disassoc

示例8: rtwn_usb_reset_tx_list

示例9: ieee80211_clean_nodes

示例10: r92c_init_ra

示例11: ath_net80211_uapsd_retqosnullframe

示例12: ageq_mfree

示例13: wlan_getrssi

示例14: wlan_get_txrate_info

示例15: rtwn_drain_mbufq

示例16: ieee80211_release_node

示例17: ath_handle_micerror

示例18: ieee80211_free_allnodes

示例19: wlan_add_sta_node

示例20: wmi_peer_sta_kickout_event_handler

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

bitwiseshiftleft/sjcl: Stanford Javascri

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053