C++ i2c_unregister_device函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中i2c_unregister_device函数的典型用法代码示例。如果您正苦于以下问题：C++ i2c_unregister_device函数的具体用法？C++ i2c_unregister_device怎么用？C++ i2c_unregister_device使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了i2c_unregister_device函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: max8997_i2c_probe

static int max8997_i2c_probe(struct i2c_client *i2c,
			    const struct i2c_device_id *id)
{
	struct max8997_dev *max8997;
	struct max8997_platform_data *pdata = i2c->dev.platform_data;
	int ret = 0;

	max8997 = kzalloc(sizeof(struct max8997_dev), GFP_KERNEL);
	if (max8997 == NULL)
		return -ENOMEM;

	i2c_set_clientdata(i2c, max8997);
	max8997->dev = &i2c->dev;
	max8997->i2c = i2c;
	max8997->type = id->driver_data;
	max8997->irq = i2c->irq;

	if (!pdata)
		goto err;

	max8997->irq_base = pdata->irq_base;
	max8997->ono = pdata->ono;
	max8997->wakeup = pdata->wakeup;

	mutex_init(&max8997->iolock);

	max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
	i2c_set_clientdata(max8997->rtc, max8997);
	max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
	i2c_set_clientdata(max8997->haptic, max8997);
	max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
	i2c_set_clientdata(max8997->muic, max8997);

	pm_runtime_set_active(max8997->dev);

	max8997_irq_init(max8997);

	mfd_add_devices(max8997->dev, -1, max8997_devs,
			ARRAY_SIZE(max8997_devs),
			NULL, 0);

	/*
	 * TODO: enable others (flash, muic, rtc, battery, ...) and
	 * check the return value
	 */

	if (ret < 0)
		goto err_mfd;

	return ret;

err_mfd:
	mfd_remove_devices(max8997->dev);
	i2c_unregister_device(max8997->muic);
	i2c_unregister_device(max8997->haptic);
	i2c_unregister_device(max8997->rtc);
err:
	kfree(max8997);
	return ret;
}

开发者ID:303750856，项目名称:linux-3.1，代码行数:60，代码来源:max8997.c

示例2: tegra_camera_disable

static void tegra_camera_disable(struct nvhost_device *ndev)
{
	struct i2c_adapter *adapter;

	gpio_set_value_cansleep(TEGRA_CAMERA_GPIO_PMU, 0);
	gpio_set_value(TEGRA_CAMERA_GPIO_VI_GP3, 0);
	gpio_set_value(TEGRA_CAMERA_GPIO_CAM_PWR_EN, 0);

	gpio_free(TEGRA_CAMERA_GPIO_PMU);
	gpio_free(TEGRA_CAMERA_GPIO_VI_GP3);
	gpio_free(TEGRA_CAMERA_GPIO_CAM_PWR_EN);

	adapter = i2c_get_adapter(TEGRA_CAMERA_I2C_ADAPTER_ID);
	BUG_ON(!adapter);
	i2c_unregister_device(port_switch);
	i2c_unregister_device(port_expander);
	i2c_put_adapter(adapter);

	BUG_ON(!regulator);
	regulator_disable(regulator);
	regulator_put(regulator);
	regulator = NULL;

	/* Turn off relevant clocks. */
	clk_disable(clk_vi);
	clk_disable(clk_vi_sensor);
	clk_disable(clk_csi);
	clk_disable(clk_isp);
	clk_disable(clk_csus);
}

开发者ID:Kernelhacker，项目名称:2.6.38.3-Adam，代码行数:30，代码来源:board-seaboard-sensors.c

示例3: em28xx_dvb_fini

static int em28xx_dvb_fini(struct em28xx *dev)
{
	struct em28xx_dvb *dvb;
	struct i2c_client *client;

	if (dev->is_audio_only) {
		/* Shouldn't initialize IR for this interface */
		return 0;
	}

	if (!dev->board.has_dvb) {
		/* This device does not support the extension */
		return 0;
	}

	if (!dev->dvb)
		return 0;

	em28xx_info("Closing DVB extension");

	dvb = dev->dvb;
	client = dvb->i2c_client_tuner;

	em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE);

	if (dev->disconnected) {
		/* We cannot tell the device to sleep
		 * once it has been unplugged. */
		if (dvb->fe[0]) {
			prevent_sleep(&dvb->fe[0]->ops);
			dvb->fe[0]->exit = DVB_FE_DEVICE_REMOVED;
		}
		if (dvb->fe[1]) {
			prevent_sleep(&dvb->fe[1]->ops);
			dvb->fe[1]->exit = DVB_FE_DEVICE_REMOVED;
		}
	}

	/* remove I2C tuner */
	if (client) {
		module_put(client->dev.driver->owner);
		i2c_unregister_device(client);
	}

	/* remove I2C demod */
	client = dvb->i2c_client_demod;
	if (client) {
		module_put(client->dev.driver->owner);
		i2c_unregister_device(client);
	}

	em28xx_unregister_dvb(dvb);
	kfree(dvb);
	dev->dvb = NULL;
	kref_put(&dev->ref, em28xx_free_device);

	return 0;
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:58，代码来源:em28xx-dvb.c

示例4: atomisp_unregister_acpi_devices

/*
 * In BTY, ACPI enumination will register all the camera i2c devices
 * which will cause v4l2_i2c_new_subdev_board() failed called in atomisp
 * driver.
 * Here we unregister the devices registered by ACPI
 */
static void atomisp_unregister_acpi_devices(struct atomisp_platform_data *pdata)
{
	const char *subdev_name[] = {
		"3-0053",	/* FFRD8 lm3554 */
		"4-0036",	/* ov2722 */
		"4-0010",	/* imx1xx Sensor*/
		"4-0053",	/* FFRD10 lm3554 */
		"4-0054",	/* imx1xx EEPROM*/
		"4-000c",	/* imx1xx driver*/
		"2-0053",	/* byt-crv2 lm3554*/
		"2-0063",	/* byt-crv2 lm3642*/
		"2-0010",	/* imx1xx driver*/
		"2-0036",	/* ov2722 driver*/
		"2-003c",	/* gc2235 driver*/
		"2-0010",	/* CHT OV5693 */
		"4-003c",	/* CHT AP1302 */
		"1-0053",	/* CHT lm3554 */
		"4-001f",	/* CHT m10mo */
#if 0
		"INTCF0B:00",	/* From ACPI ov2722 */
		"INTCF1A:00",	/* From ACPI imx175 */
		"INTCF1C:00",	/* From ACPI lm3554 */
#endif
	};
	struct device *dev;
	struct i2c_client *client;
	struct i2c_board_info board_info;
	int i;
	/* search by device name */
	for (i = 0; i < ARRAY_SIZE(subdev_name); i++) {
		dev = bus_find_device_by_name(&i2c_bus_type, NULL,
					      subdev_name[i]);
		if (dev) {
			client = to_i2c_client(dev);
			board_info.flags = client->flags;
			board_info.addr = client->addr;
			board_info.irq = client->irq;
			strlcpy(board_info.type, client->name,
				sizeof(client->name));
			i2c_unregister_device(client);
		}
	}
#if 0
	/* search by client name */
	for (i = 0; i < ARRAY_SIZE(subdev_name); i++) {
		client = i2c_find_client_by_name(subdev_name[i]);
		if (client) {
			board_info.flags = client->flags;
			board_info.addr = client->addr;
			board_info.irq = client->irq;
			strlcpy(board_info.type, client->name,
				sizeof(client->name));
			i2c_unregister_device(client);
		}
	}
#endif
}

开发者ID:NicholasPace，项目名称:android_kernel_asus_moorefield-stock，代码行数:63，代码来源:platform_camera.c

示例5: chromeos_laptop_exit

static void __exit chromeos_laptop_exit(void)
{
	if (als)
		i2c_unregister_device(als);
	if (tp)
		i2c_unregister_device(tp);
	if (ts)
		i2c_unregister_device(ts);
}

开发者ID:03199618，项目名称:linux，代码行数:9，代码来源:chromeos_laptop.c

示例6: max77693_i2c_remove

static int max77693_i2c_remove(struct i2c_client *i2c)
{
	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);

	mfd_remove_devices(max77693->dev);
	i2c_unregister_device(max77693->muic);
	i2c_unregister_device(max77693->haptic);

	return 0;
}

开发者ID:AllenWeb，项目名称:linux，代码行数:10，代码来源:max77693.c

示例7: max77828_i2c_remove

static int max77828_i2c_remove(struct i2c_client *i2c)
{
	struct max77828_dev *max77828 = i2c_get_clientdata(i2c);

	mfd_remove_devices(max77828->dev);
	i2c_unregister_device(max77828->muic);
	i2c_unregister_device(max77828->led);
	kfree(max77828);

	return 0;
}

开发者ID:MikeForeskin，项目名称:Vindicator-S6-MM，代码行数:11，代码来源:max77828.c

示例8: sfe4001_fini

static void sfe4001_fini(struct efx_nic *efx)
{
	struct falcon_board *board = falcon_board(efx);

	EFX_INFO(efx, "%s\n", __func__);

	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
	sfe4001_poweroff(efx);
	i2c_unregister_device(board->ioexp_client);
	i2c_unregister_device(board->hwmon_client);
}

开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:11，代码来源:falcon_boards.c

示例9: max8997_i2c_remove

static int max8997_i2c_remove(struct i2c_client *i2c)
{
	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);

	mfd_remove_devices(max8997->dev);
	i2c_unregister_device(max8997->muic);
	i2c_unregister_device(max8997->haptic);
	i2c_unregister_device(max8997->rtc);
	kfree(max8997);

	return 0;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:12，代码来源:max8997.c

示例10: max77693_i2c_remove

static int max77693_i2c_remove(struct i2c_client *i2c)
{
	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);

	mfd_remove_devices(max77693->dev);
	i2c_unregister_device(max77693->muic);
	i2c_unregister_device(max77693->haptic);
	max77693_irq_exit(max77693);
	mutex_destroy(&max77693->iolock);
	kfree(max77693);

	return 0;
}

开发者ID:andi34，项目名称:Dhollmen_Kernel，代码行数:13，代码来源:max77693.c

示例11: stmhdmi_i2c_disconnect

static void stmhdmi_i2c_disconnect(struct stm_hdmi *hdmi)
{
  if(hdmi->edid_client)
  {
    i2c_unregister_device(hdmi->edid_client);
    hdmi->edid_client = 0;
  }
  if(hdmi->eddc_segment_reg_client)
  {
    i2c_unregister_device(hdmi->eddc_segment_reg_client);
    hdmi->eddc_segment_reg_client = 0;
  }
}

开发者ID:Audioniek，项目名称:Fortis-4G，代码行数:13，代码来源:hdmikthread.c

示例12: cx18_i2c_register

int cx18_i2c_register(struct cx18 *cx, unsigned idx)
{
	struct i2c_board_info info;
	struct i2c_client *c;
	u8 id, bus;
	int i;

	CX18_DEBUG_I2C("i2c client register\n");
	if (idx >= ARRAY_SIZE(hw_driverids) || hw_driverids[idx] == 0)
		return -1;
	id = hw_driverids[idx];
	bus = hw_bus[idx];
	memset(&info, 0, sizeof(info));
	strlcpy(info.type, hw_devicenames[idx], sizeof(info.type));
	info.addr = hw_addrs[idx];
	for (i = 0; i < I2C_CLIENTS_MAX; i++)
		if (cx->i2c_clients[i] == NULL)
			break;

	if (i == I2C_CLIENTS_MAX) {
		CX18_ERR("insufficient room for new I2C client!\n");
		return -ENOMEM;
	}

	if (id != I2C_DRIVERID_TUNER) {
		c = i2c_new_device(&cx->i2c_adap[bus], &info);
		if (c->driver == NULL)
			i2c_unregister_device(c);
		else
			cx->i2c_clients[i] = c;
		return cx->i2c_clients[i] ? 0 : -ENODEV;
	}

	/* special tuner handling */
	c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->radio);
	if (c && c->driver == NULL)
		i2c_unregister_device(c);
	else if (c)
		cx->i2c_clients[i++] = c;
	c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->demod);
	if (c && c->driver == NULL)
		i2c_unregister_device(c);
	else if (c)
		cx->i2c_clients[i++] = c;
	c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->tv);
	if (c && c->driver == NULL)
		i2c_unregister_device(c);
	else if (c)
		cx->i2c_clients[i++] = c;
	return 0;
}

开发者ID:mikuhatsune001，项目名称:linux-2.6，代码行数:51，代码来源:cx18-i2c.c

示例13: sfe4001_init

/* This board uses an I2C expander to provider power to the PHY, which needs to
 * be turned on before the PHY can be used.
 * Context: Process context, rtnl lock held
 */
static int sfe4001_init(struct efx_nic *efx)
{
	struct falcon_board *board = falcon_board(efx);
	int rc;

#if defined(CONFIG_SENSORS_LM90) || defined(CONFIG_SENSORS_LM90_MODULE)
	board->hwmon_client =
		i2c_new_device(&board->i2c_adap, &sfe4001_hwmon_info);
#else
	board->hwmon_client =
		i2c_new_dummy(&board->i2c_adap, sfe4001_hwmon_info.addr);
#endif
	if (!board->hwmon_client)
		return -EIO;

	/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
	rc = i2c_smbus_write_byte_data(board->hwmon_client,
				       MAX664X_REG_WLHO, 90);
	if (rc)
		goto fail_hwmon;

	board->ioexp_client = i2c_new_dummy(&board->i2c_adap, PCA9539);
	if (!board->ioexp_client) {
		rc = -EIO;
		goto fail_hwmon;
	}

	if (efx->phy_mode & PHY_MODE_SPECIAL) {
		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
		 * will fail. */
		falcon_stop_nic_stats(efx);
	}
	rc = sfe4001_poweron(efx);
	if (rc)
		goto fail_ioexp;

	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
	if (rc)
		goto fail_on;

	EFX_INFO(efx, "PHY is powered on\n");
	return 0;

fail_on:
	sfe4001_poweroff(efx);
fail_ioexp:
	i2c_unregister_device(board->ioexp_client);
fail_hwmon:
	i2c_unregister_device(board->hwmon_client);
	return rc;
}

开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:55，代码来源:falcon_boards.c

示例14: ms6_wdt_exit

static void __exit ms6_wdt_exit(void)
{
	if(ms6_data.client) {
		i2c_del_driver(&ms6_wdt_driver);
		i2c_unregister_device(ms6_data.client);
	}
}

开发者ID:laudarch，项目名称:simcom-linux-kernel，代码行数:7，代码来源:ms6_wdt.c

示例15: smsi2c_unregister

void smsi2c_unregister(void)
{
	//need to save smsdev and check for null
	
	if (g_smsi2c_device) {
#ifdef SMS_RK_TS
		/*********************
		* stop rk ts interface
		* smsi2c_ts_feed(void *, NULL, NULL);
		************************/
		rk29_hsadc_stop_transmit();
		rk_ts_callback_setup(NULL, NULL, NULL);
#endif
#if 1 //wood, ++, @20140916
		free_irq(gpio_to_irq(host_i2c_intr_pin), g_smsi2c_device);
		gpio_free(host_i2c_intr_pin);
#endif
		if (g_smsi2c_device->coredev) {
			//need to save smsdev and check for null
			smscore_unregister_device(g_smsi2c_device->coredev);
			g_smsi2c_device->coredev = NULL;
		}
		i2c_unregister_device(g_smsi2c_device->client);
		i2c_put_adapter(g_smsi2c_device->adap);
		kfree(g_smsi2c_device);
		g_smsi2c_device = NULL; 
	}

}

开发者ID:iuncuim，项目名称:A476_V1B_5.1_kernel，代码行数:29，代码来源:smsi2c.c

示例16: max77686_i2c_probe

static int max77686_i2c_probe(struct i2c_client *i2c,
			      const struct i2c_device_id *id)
{
	struct max77686_dev *max77686 = NULL;
	struct max77686_platform_data *pdata = dev_get_platdata(&i2c->dev);
	unsigned int data;
	int ret = 0;

	if (i2c->dev.of_node)
		pdata = max77686_i2c_parse_dt_pdata(&i2c->dev);

	if (!pdata) {
		dev_err(&i2c->dev, "No platform data found.\n");
		return -EIO;
	}

	max77686 = devm_kzalloc(&i2c->dev,
				sizeof(struct max77686_dev), GFP_KERNEL);
	if (max77686 == NULL)
		return -ENOMEM;

	i2c_set_clientdata(i2c, max77686);
	max77686->dev = &i2c->dev;
	max77686->i2c = i2c;
	max77686->type = id->driver_data;

	max77686->wakeup = pdata->wakeup;
	max77686->irq_gpio = pdata->irq_gpio;
	max77686->irq = i2c->irq;

	max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
	if (IS_ERR(max77686->regmap)) {
		ret = PTR_ERR(max77686->regmap);
		dev_err(max77686->dev, "Failed to allocate register map: %d\n",
				ret);
		return ret;
	}

	if (regmap_read(max77686->regmap,
			 MAX77686_REG_DEVICE_ID, &data) < 0) {
		dev_err(max77686->dev,
			"device not found on this channel (this is not an error)\n");
		return -ENODEV;
	} else
		dev_info(max77686->dev, "device found\n");

	max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
	i2c_set_clientdata(max77686->rtc, max77686);

	max77686_irq_init(max77686);

	ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
			      ARRAY_SIZE(max77686_devs), NULL, 0, NULL);
	if (ret < 0) {
		mfd_remove_devices(max77686->dev);
		i2c_unregister_device(max77686->rtc);
	}

	return ret;
}

开发者ID:BozkurTR，项目名称:kernel，代码行数:60，代码来源:max77686.c

示例17: max732x_remove

static int __devexit max732x_remove(struct i2c_client *client)
{
	struct max732x_platform_data *pdata = client->dev.platform_data;
	struct max732x_chip *chip = i2c_get_clientdata(client);
	int ret;

	if (pdata->teardown) {
		ret = pdata->teardown(client, chip->gpio_chip.base,
				chip->gpio_chip.ngpio, pdata->context);
		if (ret < 0) {
			dev_err(&client->dev, "%s failed, %d\n",
					"teardown", ret);
			return ret;
		}
	}

	ret = gpiochip_remove(&chip->gpio_chip);
	if (ret) {
		dev_err(&client->dev, "%s failed, %d\n",
				"gpiochip_remove()", ret);
		return ret;
	}

	max732x_irq_teardown(chip);

	/* unregister any dummy i2c_client */
	if (chip->client_dummy)
		i2c_unregister_device(chip->client_dummy);

	kfree(chip);
	return 0;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:32，代码来源:max732x.c

示例18: minnow_module_exit

static void __exit minnow_module_exit(void)
{
	i2c_unregister_device(client);
	i2c_put_adapter(adap);

	pr_info("exited\n");
}

开发者ID:Rashed97，项目名称:mcp9808，代码行数:7，代码来源:minnow.c

示例19: max77693_i2c_remove

static int max77693_i2c_remove(struct i2c_client *i2c)
{
	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);

	mfd_remove_devices(max77693->dev);

	regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
	regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
	regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
	regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);

	i2c_unregister_device(max77693->muic);
	i2c_unregister_device(max77693->haptic);

	return 0;
}

开发者ID:383530895，项目名称:linux，代码行数:16，代码来源:max77693.c

示例20: ImmVibeSPI_ForceOut_Terminate

/*
** Called at termination time to disable amp, etc...
*/
IMMVIBESPIAPI VibeStatus ImmVibeSPI_ForceOut_Terminate(void)
{
    DbgOut((DBL_VERBOSE, "ImmVibeSPI_ForceOut_Terminate.\n"));

    if (g_autotune_brake_enabled && g_workqueue)
    {
        destroy_workqueue(g_workqueue);
        g_workqueue = 0;
    }

    ImmVibeSPI_ForceOut_AmpDisable(0);

    /* From Xiaomi start */
    kobject_del(vibe_kobj);
    gpio_direction_output(GPIO_VIBTONE_EN1, GPIO_LEVEL_LOW);
    gpio_free(GPIO_VIBTONE_EN1);
    /* From Xiaomi end */

    /* Remove TS5000 driver */
    i2c_del_driver(&drv2604_driver);

    /* Reverse i2c_new_device */
    i2c_unregister_device(g_pTheClient);

    return VIBE_S_SUCCESS;
}

开发者ID:vasishath，项目名称:kernel_cancro，代码行数:29，代码来源:ImmVibeSPI.c

注：本文中的i2c_unregister_device函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ i2c_write函数代码示例发布时间：2022-05-30

C++ i2c_transfer函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9670|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ i2c_unregister_device函数代码示例

示例1: max8997_i2c_probe

示例2: tegra_camera_disable

示例3: em28xx_dvb_fini

示例4: atomisp_unregister_acpi_devices

示例5: chromeos_laptop_exit

示例6: max77693_i2c_remove

示例7: max77828_i2c_remove

示例8: sfe4001_fini

示例9: max8997_i2c_remove

示例10: max77693_i2c_remove

示例11: stmhdmi_i2c_disconnect

示例12: cx18_i2c_register

示例13: sfe4001_init

示例14: ms6_wdt_exit

示例15: smsi2c_unregister

示例16: max77686_i2c_probe

示例17: max732x_remove

示例18: minnow_module_exit

示例19: max77693_i2c_remove

示例20: ImmVibeSPI_ForceOut_Terminate

请发表评论

全部评论

上一篇：

下一篇：

万里平台汉口会场

lyfeyaj/swipe: Swipe is the most accurat

solegalli/feature-selection-for-machine-

sussillo/hfopt-matlab: A parallel, cpu-b

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053