C++ i2c_smbus_write_word_data函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中i2c_smbus_write_word_data函数的典型用法代码示例。如果您正苦于以下问题：C++ i2c_smbus_write_word_data函数的具体用法？C++ i2c_smbus_write_word_data怎么用？C++ i2c_smbus_write_word_data使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了i2c_smbus_write_word_data函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: dump_info

void dump_info() {
#define DEVICE_TYPE 0x0001
#define FW_VERSION 0x0002
#define HW_VERSION 0x0003
#define DF_VERSION 0x001F
    int res;
    short data;
    res = ioctl(i2c_fd, I2C_SLAVE_FORCE, I2C_DEV_NORMAL_ADDR);
    CHECK(res);

    printf("===== DUMP INFO 0x%x =====\n", I2C_DEV_NORMAL_ADDR);

    i2c_smbus_write_word_data(i2c_fd, 0x00, DEVICE_TYPE);
    i2c_smbus_write_word_data(i2c_fd, 0x01, DEVICE_TYPE);
    data = i2c_smbus_read_word_data(i2c_fd, 0x00);
    printf("DEVICE_TYPE: %x\n", data);

    i2c_smbus_write_word_data(i2c_fd, 0x00, FW_VERSION);
    i2c_smbus_write_word_data(i2c_fd, 0x01, FW_VERSION);
    data = i2c_smbus_read_word_data(i2c_fd, 0x00);
    printf("FW_VERSION: %x\n", data);

    i2c_smbus_write_word_data(i2c_fd, 0x00, HW_VERSION);
    i2c_smbus_write_word_data(i2c_fd, 0x01, HW_VERSION);
    data = i2c_smbus_read_word_data(i2c_fd, 0x00);
    printf("HW_VERSION: %x\n", data);

    i2c_smbus_write_word_data(i2c_fd, 0x00, DF_VERSION);
    i2c_smbus_write_word_data(i2c_fd, 0x01, DF_VERSION);
    data = i2c_smbus_read_word_data(i2c_fd, 0x00);
    printf("DF_VERSION: %x\n", data);
    printf("=====================\n");
}

开发者ID:Casperkings，项目名称:FastBoot，代码行数:33，代码来源:dfi_update.c

示例2: us5182d_setup_prox

static int us5182d_setup_prox(struct iio_dev *indio_dev,
			      enum iio_event_direction dir, u16 val)
{
	struct us5182d_data *data = iio_priv(indio_dev);

	if (dir == IIO_EV_DIR_FALLING)
		return i2c_smbus_write_word_data(data->client,
						 US5182D_REG_PXL_TH, val);
	else if (dir == IIO_EV_DIR_RISING)
		return i2c_smbus_write_word_data(data->client,
						 US5182D_REG_PXH_TH, val);

	return 0;
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:14，代码来源:us5182d.c

示例3: __locked_start_current_mon

static s32 __locked_start_current_mon(struct i2c_client *client)
{
	s32 retval;
	s32 shunt_uV;
	s16 shunt_limit;
	s16 alert_mask;
	struct ina230_data *data = i2c_get_clientdata(client);

	if (!data->pdata->current_threshold) {
		dev_err(&client->dev, "no current threshold specified\n");
		return -EINVAL;
	}

	retval = i2c_smbus_write_word_data(client, INA230_CONFIG,
				    __constant_cpu_to_be16(INA230_CONT_CONFIG));
	if (retval < 0) {
		dev_err(&client->dev, "config data write failed sts: 0x%x\n",
			retval);
		return retval;
	}

	shunt_uV = data->pdata->resistor * data->pdata->current_threshold;
	if (data->pdata->shunt_polarity_inverted)
		shunt_uV *= -1;

	shunt_limit = (s16) uv_to_alert_register(shunt_uV);

	retval = i2c_smbus_write_word_data(client, INA230_ALERT,
					   cpu_to_be16(shunt_limit));
	if (retval < 0) {
		dev_err(&client->dev, "alert data write failed sts: 0x%x\n",
			retval);
		return retval;
	}

	alert_mask = shunt_limit >= 0 ? INA230_MASK_SOL : INA230_MASK_SUL;
	retval = i2c_smbus_write_word_data(client, INA230_MASK,
					   cpu_to_be16(alert_mask));
	if (retval < 0) {
		dev_err(&client->dev, "mask data write failed sts: 0x%x\n",
			retval);
		return retval;
	}

	data->running = true;

	return 0;
}

开发者ID:vocoderism，项目名称:Tegra-Note-7，代码行数:48，代码来源:ina230.c

示例4: iI2cWriteReg16

// -----------------------------------------------------------------------------
int
iI2cWriteReg16 (int fd, uint8_t reg, uint16_t value) {
  int i = i2c_smbus_write_word_data (fd, reg, value);

  vI2cPrintDebug (i, __func__);
  return i;
}

开发者ID:epsilonrt，项目名称:sysio，代码行数:8，代码来源:i2c.c

示例5: menf21bmc_wdt_shutdown

static void menf21bmc_wdt_shutdown(struct platform_device *pdev)
{
	struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev);

	i2c_smbus_write_word_data(drv_data->i2c_client,
				  BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
}

开发者ID:avagin，项目名称:linux，代码行数:7，代码来源:menf21bmc_wdt.c

示例6: show_alarm

static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
			  char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct ds620_data *data = ds620_update_client(dev);
	struct i2c_client *client = to_i2c_client(dev);
	u16 conf, new_conf;
	int res;

	if (IS_ERR(data))
		return PTR_ERR(data);

	/* reset alarms if necessary */
	res = i2c_smbus_read_word_data(client, DS620_REG_CONF);
	if (res < 0)
		return res;

	conf = swab16(res);
	new_conf = conf;
	new_conf &= ~attr->index;
	if (conf != new_conf) {
		res = i2c_smbus_write_word_data(client, DS620_REG_CONF,
						swab16(new_conf));
		if (res < 0)
			return res;
	}

	return sprintf(buf, "%d\n", !!(conf & attr->index));
}

开发者ID:1111saeid，项目名称:jb_kernel_3.0.16_htc_golfu，代码行数:29，代码来源:ds620.c

示例7: pca9539_write_reg

/* NOTE:  we can't currently rely on fault codes to come from SMBus
 * calls, so we map all errors to EIO here and return zero otherwise.
 */
static int pca9539_write_reg(struct pca9539_chip *chip, int reg, uint16_t val)
{
    if (i2c_smbus_write_word_data(chip->client, reg, val) < 0)
        return -EIO;
    else
        return 0;
}

开发者ID:amalrajt，项目名称:linux-sh4-2.6.23.17_stm23_A18B，代码行数:10，代码来源:pca9539.c

示例8: ds620_init_client

static void ds620_init_client(struct i2c_client *client)
{
	struct ds620_platform_data *ds620_info = client->dev.platform_data;
	u16 conf, new_conf;

	new_conf = conf =
	    swab16(i2c_smbus_read_word_data(client, DS620_REG_CONF));

	/* switch to continuous conversion mode */
	new_conf &= ~DS620_REG_CONFIG_1SHOT;
	/* already high at power-on, but don't trust the BIOS! */
	new_conf |= DS620_REG_CONFIG_PO2;
	/* thermostat mode according to platform data */
	if (ds620_info && ds620_info->pomode == 1)
		new_conf &= ~DS620_REG_CONFIG_PO1; /* PO_LOW */
	else if (ds620_info && ds620_info->pomode == 2)
		new_conf |= DS620_REG_CONFIG_PO1; /* PO_HIGH */
	else
		new_conf &= ~DS620_REG_CONFIG_PO2; /* always low */
	/* with highest precision */
	new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0;

	if (conf != new_conf)
		i2c_smbus_write_word_data(client, DS620_REG_CONF,
					  swab16(new_conf));

	/* start conversion */
	i2c_smbus_write_byte(client, DS620_COM_START);
}

开发者ID:1111saeid，项目名称:jb_kernel_3.0.16_htc_golfu，代码行数:29，代码来源:ds620.c

示例9: cm32181_write_als_it

/**
 * cm32181_write_als_it() - Write sensor integration time
 * @cm32181:	pointer of struct cm32181.
 * @val:	integration time by millisecond.
 *
 * Convert integration time (ms) to sensor value.
 *
 * Return: i2c_smbus_write_word_data command return value.
 */
static int cm32181_write_als_it(struct cm32181_chip *cm32181, int val)
{
	struct i2c_client *client = cm32181->client;
	u16 als_it;
	int ret, i, n;

	n = ARRAY_SIZE(als_it_value);
	for (i = 0; i < n; i++)
		if (val <= als_it_value[i])
			break;
	if (i >= n)
		i = n - 1;

	als_it = als_it_bits[i];
	als_it <<= CM32181_CMD_ALS_IT_SHIFT;

	mutex_lock(&cm32181->lock);
	cm32181->conf_regs[CM32181_REG_ADDR_CMD] &=
		~CM32181_CMD_ALS_IT_MASK;
	cm32181->conf_regs[CM32181_REG_ADDR_CMD] |=
		als_it;
	ret = i2c_smbus_write_word_data(client, CM32181_REG_ADDR_CMD,
			cm32181->conf_regs[CM32181_REG_ADDR_CMD]);
	mutex_unlock(&cm32181->lock);

	return ret;
}

开发者ID:CenturyGlorion，项目名称:linux，代码行数:36，代码来源:cm32181.c

示例10: cm32181_reg_init

/**
 * cm32181_reg_init() - Initialize CM32181 registers
 * @cm32181:	pointer of struct cm32181.
 *
 * Initialize CM32181 ambient light sensor register to default values.
 *
 * Return: 0 for success; otherwise for error code.
 */
static int cm32181_reg_init(struct cm32181_chip *cm32181)
{
	struct i2c_client *client = cm32181->client;
	int i;
	s32 ret;

	ret = i2c_smbus_read_word_data(client, CM32181_REG_ADDR_ID);
	if (ret < 0)
		return ret;

	/* check device ID */
	if ((ret & 0xFF) != 0x81)
		return -ENODEV;

	/* Default Values */
	cm32181->conf_regs[CM32181_REG_ADDR_CMD] = CM32181_CMD_ALS_ENABLE |
			CM32181_CMD_ALS_IT_DEFAULT | CM32181_CMD_ALS_SM_DEFAULT;
	cm32181->calibscale = CM32181_CALIBSCALE_DEFAULT;

	/* Initialize registers*/
	for (i = 0; i < CM32181_CONF_REG_NUM; i++) {
		ret = i2c_smbus_write_word_data(client, cm32181_reg[i],
			cm32181->conf_regs[i]);
		if (ret < 0)
			return ret;
	}

	return 0;
}

开发者ID:CenturyGlorion，项目名称:linux，代码行数:37，代码来源:cm32181.c

示例11: cm3218_write_als_it

/**
 * cm3218_write_als_it() - Write sensor integration time
 * @cm3218:	pointer of struct cm3218.
 * @val:	integration time in second.
 * @val2:	integration time in millisecond.
 *
 * Convert integration time to sensor value.
 *
 * Return: i2c_smbus_write_word_data command return value.
 */
static int cm3218_write_als_it(struct cm3218_chip *chip, int val, int val2)
{
	u16 als_it, cmd;
	int i;
	s32 ret;

	for (i = 0; i < ARRAY_SIZE(cm3218_als_it_scales); i++) {
		if (val == cm3218_als_it_scales[i].val &&
			val2 == cm3218_als_it_scales[i].val2) {
			als_it = cm3218_als_it_scales[i].it;
			als_it <<= CM3218_CMD_ALS_IT_SHIFT;

			cmd = chip->conf_regs[CM3218_REG_ADDR_CMD] &
				~CM3218_CMD_ALS_IT_MASK;
			cmd |= als_it;
			ret = i2c_smbus_write_word_data(
						chip->als_client,
						CM3218_REG_ADDR_CMD,
						cmd);
			if (ret < 0)
				return ret;
			chip->conf_regs[CM3218_REG_ADDR_CMD] = cmd;
			return 0;
		}
	}
	return -EINVAL;
}

开发者ID:hadess，项目名称:cm3218，代码行数:37，代码来源:cm3218.c

示例12: stv_mbx_poweroff_probe

static int __devinit stv_mbx_poweroff_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
	u16 data;
	int res = 0;
	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
		pr_err("%s: i2c_check_functionality failed\n", __FUNCTION__);
		res = -ENODEV;
		goto out;
	}
	/* remember our client */
	stv_mbx_poweroff_client = client;

	/* setup power handling */
	data  = i2c_smbus_read_word_data(stv_mbx_poweroff_client, STV_MBX_PWR_ADDRESS);
	printk("stv_mbx_poweroff_probe, status reg = 0x%x\n", data);
	/* enable power control */
	data &= ~ATV_MBX_PWR_DISABLE;
	/* set hw power button to power off when held for > 3 seconds. */
	data |=  ATV_MBX_PWR_HW_BUTTON;
	/* set ir power button to power off when held for > 3 seconds. */
	data |=  ATV_MBX_PWR_IR_BUTTON;
	i2c_smbus_write_word_data(stv_mbx_poweroff_client, STV_MBX_PWR_ADDRESS, data);

	/* hook the poweroff power mananger routine*/
	pm_power_off = stv_mbx_poweroff;
out:
	return res;
}

开发者ID:mattburris，项目名称:buildroot-linux-kernel-m3，代码行数:28，代码来源:stv_mbx_poweroff.c

示例13: tmd2771x_als_polling_work_handler

/* ALS polling routine */
static void tmd2771x_als_polling_work_handler(struct work_struct *work)
{
	struct i2c_client *client=data->client;
	int cdata, irdata, pdata;
	int luxValue=0;

	//1. work queue is reentrant in SMP.
	//2. serveral function here calls need mutex.
	mutex_lock(&data->update_lock);
	cdata = i2c_smbus_read_word_data(client, CMD_WORD|TMD2771X_CDATAL_REG);
	irdata = i2c_smbus_read_word_data(client, CMD_WORD|TMD2771X_IRDATAL_REG);
	pdata = i2c_smbus_read_word_data(client, CMD_WORD|TMD2771X_PDATAL_REG);

	if ((cdata < 0) || (irdata < 0) || (pdata < 0)) {
		mutex_unlock(&data->update_lock);
		return;
	}

	luxValue = LuxCalculation(client, cdata, irdata);
	luxValue = luxValue>0 ? luxValue : 0;
	luxValue = luxValue<10000 ? luxValue : 10000;
	light_data = luxValue;
	//printk("%s: lux = %d cdata = %x  irdata = %x pdata = %x \n", __func__, luxValue, cdata, irdata, pdata);
	// check PS under sunlight
	if ( (data->ps_detection == 1) && (cdata > (75*(1024*(256-data->atime)))/100))	// PS was previously in far-to-near condition
	{
		// need to inform input event as there will be no interrupt from the PS
		input_report_abs(data->input_dev_ps, ABS_DISTANCE, 1);/* NEAR-to-FAR detection */
		input_sync(data->input_dev_ps);

		i2c_smbus_write_word_data(client, CMD_WORD|TMD2771X_PILTL_REG, 0);
		i2c_smbus_write_word_data(client, CMD_WORD|TMD2771X_PIHTL_REG, data->ps_threshold);

		data->pilt = 0;
		data->piht = data->ps_threshold;

		data->ps_detection = 0;	/* near-to-far detected */

		printk("tmd2771x_proximity_handler = FAR\n");
	}

	input_report_abs(data->input_dev_als, ABS_MISC, luxValue); // report the lux level
	input_sync(data->input_dev_als);

	schedule_delayed_work(&data->als_dwork, msecs_to_jiffies(data->als_poll_delay));	// restart timer
	mutex_unlock(&data->update_lock);
}

开发者ID:ColonelSaumon，项目名称:android_kernel_nokia_msm8x25，代码行数:48，代码来源:tmd2771x.c

示例14: fsa9480_reg_init

static void fsa9480_reg_init(struct fsa9480_usbsw *usbsw, int mansw_set)
{
	struct i2c_client *client = usbsw->client;
	unsigned int ctrl = CON_MASK;
	int ret;

	/* mask interrupts (unmask attach/detach/ovp_dcp_dis/ ovp_en only) */
	ret = i2c_smbus_write_word_data(client, FSA9480_REG_INT1_MASK, 0xFF5C);
	if (ret < 0)
		dev_err(&client->dev, "%s: err %d\n", __func__, ret);

	/* mask all car kit interrupts */
	ret = i2c_smbus_write_word_data(client,
			FSA9480_REG_CK_INTMASK1, 0x07ff);
	if (ret < 0)
		dev_err(&client->dev, "%s: err %d\n", __func__, ret);

	/* ADC Detect Time: 500ms */
	ret = i2c_smbus_write_byte_data(client, FSA9480_REG_TIMING1, 0x6);
	if (ret < 0)
		dev_err(&client->dev, "%s: err %d\n", __func__, ret);

	if (mansw_set) {
		if (usbsw->mansw) {
			ret = i2c_smbus_write_byte_data(client,
				FSA9480_REG_MANSW1, usbsw->mansw);
			if (ret < 0)
				dev_err(&client->dev,
					"%s: err %d\n", __func__, ret);
			ctrl &= ~CON_MANUAL_SW;	/* Manual Switching Mode */
		}

		ret = i2c_smbus_write_byte_data(client, FSA9480_REG_CTRL, ctrl);
	} else {
		usbsw->mansw = i2c_smbus_read_byte_data(client,
						FSA9480_REG_MANSW1);
		if (usbsw->mansw < 0)
			dev_err(&client->dev,
				"%s: err %d\n", __func__, usbsw->mansw);
	}

#if (defined(CONFIG_MHL_SWITCH) && defined(CONFIG_MHL_SII9234))	
	i2c_smbus_write_byte_data(client, FSA9480_REG_INT2_MASK, 0xFE & i2c_smbus_read_byte_data(client, 0x06));
#endif
	if (ret < 0)
		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
}

开发者ID:AdiPat，项目名称:android_kernel_tegra_n1，代码行数:47，代码来源:fsa9480.c

示例15: ina3221_probe

static int __devinit ina3221_probe(struct i2c_client *client,
			const struct i2c_device_id *id)
{
	struct ina3221_data *data;
	int ret, i;

	data = devm_kzalloc(&client->dev, sizeof(struct ina3221_data),
						GFP_KERNEL);
	if (!data) {
		ret = -ENOMEM;
		goto exit;
	}
	i2c_set_clientdata(client, data);
	data->plat_data = client->dev.platform_data;
	mutex_init(&data->mutex);

	data->mode = TRIGGERED;
	data->shutdown_complete = 0;
	/* reset ina3221 */
	ret = i2c_smbus_write_word_data(client, INA3221_CONFIG,
		__constant_cpu_to_be16((INA3221_RESET)));
	if (ret < 0) {
		dev_err(&client->dev, "ina3221 reset failure status: 0x%x\n",
			ret);
		goto exit_free;
	}

	for (i = 0; i < ARRAY_SIZE(ina3221); i++) {
		ret = device_create_file(&client->dev, &ina3221[i].dev_attr);
		if (ret) {
			dev_err(&client->dev, "device_create_file failed.\n");
			goto exit_remove;
		}
	}
	data->client = client;
	data->nb.notifier_call = ina3221_hotplug_notify;
	register_hotcpu_notifier(&(data->nb));

	data->hwmon_dev = hwmon_device_register(&client->dev);
	if (IS_ERR(data->hwmon_dev)) {
		ret = PTR_ERR(data->hwmon_dev);
		goto exit_remove;
	}

	/* set ina3221 to power down mode */
	ret = __locked_power_down_ina3221(client);
	if (ret < 0)
		goto exit_remove;

	return 0;

exit_remove:
	while (i--)
		device_remove_file(&client->dev, &ina3221[i].dev_attr);
exit_free:
	devm_kfree(&client->dev, data);
exit:
	return ret;
}

开发者ID:lostdeveloper，项目名称:Grouper-3.4，代码行数:59，代码来源:ina3221.c

示例16: maven_set_reg_pair

static int maven_set_reg_pair(struct i2c_client* c, int reg, int val) {
	s32 err;

	err = i2c_smbus_write_word_data(c, reg, val);
	if (err)
		printk(KERN_INFO "WriteRegPair(%d) failed\n", reg);
	return err;
}

开发者ID:muromec，项目名称:linux-ezxdev，代码行数:8，代码来源:matroxfb_maven.c

示例17: tmd2771x_set_piht

static int tmd2771x_set_piht(struct i2c_client *client, int threshold)
{
	int ret;
	ret = i2c_smbus_write_word_data(client, CMD_WORD|TMD2771X_PIHTL_REG, threshold);
	data->piht = threshold;

	return ret;
}

开发者ID:ColonelSaumon，项目名称:android_kernel_nokia_msm8x25，代码行数:8，代码来源:tmd2771x.c

示例18: mt9v111_write_reg

/*!
 * Writes to the register via I2C.
 */
static inline int mt9v111_write_reg(u8 reg, u16 val)
{
	pr_debug("In mt9v111_write_reg (0x%x, 0x%x)\n", reg, val);
	pr_debug("   write reg %x val %x.\n", reg, val);

	return i2c_smbus_write_word_data(mt9v111_data.i2c_client,
					 reg, cpu_to_be16(val));
}

开发者ID:panfudonmx6q，项目名称:imx6q_fsl，代码行数:11，代码来源:mt9v111.c

示例19: ina230_get_current

s32 ina230_get_current(void)
{
	struct i2c_client *client;
	struct ina230_data *data;
	s32 current_mA;
	int retval;

	if (!p_ina230_data)
		return INA230_ERROR;

	client = p_ina230_data->client;
	data = p_ina230_data;

	mutex_lock(&data->mutex);
	/* fill calib data */
	retval = i2c_smbus_write_word_data(client, INA230_CAL,
		__constant_cpu_to_be16(data->pdata->calibration_data));
	if (retval < 0) {
		dev_err(&client->dev, "calibration data write failed sts: 0x%x\n",
			retval);
		mutex_unlock(&data->mutex);
		return INA230_ERROR;
	}

	retval = ensure_enabled_start(client);
	if (retval < 0) {
		mutex_unlock(&data->mutex);
		return INA230_ERROR;
	}

	retval = __locked_wait_for_conversion(&client->dev);
	if (retval) {
		mutex_unlock(&data->mutex);
		return INA230_ERROR;
	}

	/* getting current readings in milli amps*/
	retval = i2c_smbus_read_word_data(client, INA230_CURRENT);
	if (retval < 0) {
		mutex_unlock(&data->mutex);
		return INA230_ERROR;
	}
	current_mA = (s16) be16_to_cpu(retval);

	ensure_enabled_end(client);
	mutex_unlock(&data->mutex);

	if (data->pdata->shunt_polarity_inverted)
		current_mA *= -1;

	current_mA *= (s16) data->pdata->power_lsb;
	if (data->pdata->divisor)
		current_mA /= (s16) data->pdata->divisor;
	if (data->pdata->precision_multiplier)
		current_mA /= (s16) data->pdata->precision_multiplier;

	return current_mA;
}

开发者ID:vocoderism，项目名称:Tegra-Note-7，代码行数:58，代码来源:ina230.c

示例20: enter_rom_mode

void enter_rom_mode() {
    printf("enter_rom_mode\n");
    int res;
    res = ioctl(i2c_fd, I2C_SLAVE_FORCE, I2C_DEV_NORMAL_ADDR);
    CHECK(res);
    i2c_smbus_write_word_data(i2c_fd, 0x00, 0x0F00);
    res = ioctl(i2c_fd, I2C_SLAVE, I2C_DEV_ROM_ADDR);
    CHECK(res);
}

开发者ID:Casperkings，项目名称:FastBoot，代码行数:9，代码来源:dfi_update.c

注：本文中的i2c_smbus_write_word_data函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ i2c_start函数代码示例发布时间：2022-05-30

C++ i2c_smbus_write_i2c_block_data函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9668|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ i2c_smbus_write_word_data函数代码示例

示例1: dump_info

示例2: us5182d_setup_prox

示例3: __locked_start_current_mon

示例4: iI2cWriteReg16

示例5: menf21bmc_wdt_shutdown

示例6: show_alarm

示例7: pca9539_write_reg

示例8: ds620_init_client

示例9: cm32181_write_als_it

示例10: cm32181_reg_init

示例11: cm3218_write_als_it

示例12: stv_mbx_poweroff_probe

示例13: tmd2771x_als_polling_work_handler

示例14: fsa9480_reg_init

示例15: ina3221_probe

示例16: maven_set_reg_pair

示例17: tmd2771x_set_piht

示例18: mt9v111_write_reg

示例19: ina230_get_current

示例20: enter_rom_mode

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

TeamWertarbyte/material-ui-search-bar: M

鲁东大学一米网:Win7系统USB驱动器RAM的操

微信小程序构架

CVE-2022-21554

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053