• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ i2c_put_adapter函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中i2c_put_adapter函数的典型用法代码示例。如果您正苦于以下问题：C++ i2c_put_adapter函数的具体用法？C++ i2c_put_adapter怎么用？C++ i2c_put_adapter使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了i2c_put_adapter函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: knxjif_init_i2c

int __init knxjif_init_i2c(void)
{
	struct i2c_adapter *adapter;
	int res;

	adapter = i2c_get_adapter(i2c_bus);

	if (!adapter) {
		pr_warn("knxjif: i2c_get_adapter(%d) failed\n", i2c_bus);
		goto fail;
	}

#ifdef USE_ACC_IRQ
	res = gpio_request(gpio_line, NAME);
	if (0 > res) {
		pr_warn("knxjif: request gpio failed\n");
		goto fail2;
	}

	res = gpio_direction_input(gpio_line);
	if (0 > res) {
		pr_warn("knxjif: gpio direction input failed\n");
		goto fail2;
	}

	knxjif_board_info.irq = gpio_to_irq(gpio_line);
#endif // #ifdef USE_ACC_IRQ

#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)
	knxjif_i2c_client = i2c_new_probed_device(adapter,
			&knxjif_board_info,
			knxjif_addr_list,
			__knxjif_probe_i2c);
#else
	knxjif_i2c_client = i2c_new_probed_device(adapter,
			&knxjif_board_info,
			knxjif_addr_list);
#endif

	if (!knxjif_i2c_client) {
		pr_warn("knxjif: i2c_new_probed_device() failed\n");
		goto fail1;
	}

	i2c_put_adapter(adapter);

	return 0;

fail2:
#ifdef USE_ACC_IRQ
	gpio_free(gpio_line);
#endif	
fail1:
	i2c_put_adapter(adapter);
fail:
	return -1;
}
开发者ID:gozhev，项目名称:ins，代码行数:57，代码来源:knxjif.c


示例2: adv7180_write

/*
 * adv7180_write
 */
static int __init adv7180_write(int i2c_adapt, int i2c_addr, int reg, int val)
{
	struct i2c_adapter *adap;
	struct i2c_msg msg[1];
	unsigned char data[2];
	int err;

	adap = i2c_get_adapter(i2c_adapt);
	if (!adap) {
		printk(KERN_WARNING "%s: failed to get i2c adapter\n", __FUNCTION__);
		return -ENODEV;
	}
	msg->addr = i2c_addr;
	msg->flags = 0;
	msg->len = 2;
	msg->buf = data;
	data[0] = reg;
	data[1] = val;
	err = i2c_transfer(adap, msg, 1);
	i2c_put_adapter(adap);
	if (err >= 0) {
		return 0;
	}
	return err;
}
开发者ID:patrick-ken，项目名称:MyNet_N900，代码行数:28，代码来源:adv7180.c


示例3: i2c_reads

static int i2c_reads(int id, int addr, char *buf, int bytes)
{
	struct i2c_adapter *adap;
	struct i2c_msg msg[2];
	int ret;
	char reg = buf[0];

	if ((id < 0) || (addr < 0)) {
		printk("%s: Please set i2c id and addr.\n",__func__);
		return -EINVAL;
	}

	adap = i2c_get_adapter(id);
	if (!adap)
		return -EINVAL;
	msg[0].addr = addr;
	msg[0].flags = 0;
	msg[0].len = 1;
	msg[0].buf = &reg;
	msg[0].scl_rate = 100 * 1000;
	msg[0].udelay = 5;

	msg[1].addr = addr;
	msg[1].flags = I2C_M_RD;
	msg[1].len = bytes;
	msg[1].buf = buf;
	msg[1].scl_rate = 100 * 1000;
	msg[1].udelay = 5;

	ret = i2c_transfer(adap, msg, 2);
	i2c_put_adapter(adap);
	return (ret == 1) ? bytes: ret;
}
开发者ID:chengdongdong，项目名称:codes，代码行数:33，代码来源:i2c-test.c


示例4: smsi2c_unregister

void smsi2c_unregister(void)
{
	//need to save smsdev and check for null
	
	if (g_smsi2c_device) {
#ifdef SMS_RK_TS
		/*********************
		* stop rk ts interface
		* smsi2c_ts_feed(void *, NULL, NULL);
		************************/
		rk29_hsadc_stop_transmit();
		rk_ts_callback_setup(NULL, NULL, NULL);
#endif
#if 1 //wood, ++, @20140916
		free_irq(gpio_to_irq(host_i2c_intr_pin), g_smsi2c_device);
		gpio_free(host_i2c_intr_pin);
#endif
		if (g_smsi2c_device->coredev) {
			//need to save smsdev and check for null
			smscore_unregister_device(g_smsi2c_device->coredev);
			g_smsi2c_device->coredev = NULL;
		}
		i2c_unregister_device(g_smsi2c_device->client);
		i2c_put_adapter(g_smsi2c_device->adap);
		kfree(g_smsi2c_device);
		g_smsi2c_device = NULL; 
	}

}
开发者ID:iuncuim，项目名称:A476_V1B_5.1_kernel，代码行数:29，代码来源:smsi2c.c


示例5: ip7500iap_init_onboard_video

/*
 * ip7500iap_init_onboard_video
 */
static int __init ip7500iap_init_onboard_video(void)
{
	struct i2c_adapter *adap;

	/*
	 * If we are autodetect then bring up the display now
	 */
#ifdef CONFIG_DISPLAY_AUTODETECT
	/*
	 * Use the VFB device for the onboard display
	 */
	platform_device_register(&ip7500iap_vfb_device);
#endif

	platform_device_register(&ip7500iap_backlight_device);

	adap = i2c_get_adapter(0);
	if (!adap) {
		printk(KERN_WARNING "%s: Failed to get i2c adapter\n", __FUNCTION__);
		return -ENODEV;
	}

	printk(KERN_INFO "%s: registering touch screen controller resources\n", __FUNCTION__);

	i2c_new_device(adap, &ip7500iap_touch_i2c_board_info);

	i2c_put_adapter(adap);

	return 0;
}
开发者ID:kizukukoto，项目名称:WDN900_GPL，代码行数:33，代码来源:board-ip7500iap.c


示例6: wmt_vid_i2c_init

int wmt_vid_i2c_init( short dev_id)
{
    struct i2c_board_info *wmt_vid_i2c_bi = &wmt_vid_i2c_board_info;

    int ret =0;

    adapter = i2c_get_adapter(WMT_VID_I2C_CHANNEL);
    if (adapter == NULL) {
        printk("can not get i2c adapter, client address error");
        return -ENODEV;
    }

    wmt_vid_i2c_bi->addr = dev_id;

    client = i2c_new_device(adapter, wmt_vid_i2c_bi);
    if ( client == NULL) {
        printk("allocate i2c client failed");
        return -ENOMEM;
    }
    i2c_put_adapter(adapter);

    ret = i2c_add_driver(&wmt_vid_i2c_driver);
    if (ret) {
        printk("i2c_add_driver fail");
    }

    return ret;
}
开发者ID:josh64x2，项目名称:apc-rock，代码行数:28，代码来源:wmt-vid.c


示例7: i2c_flash_open

static int i2c_flash_open(struct inode *inode, struct file *file)
{
	adap = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
	adap = i2c_get_adapter(ADAPT_NUMBR);
	if (!adap)
		return -ENODEV;

	/* This creates an anonymous i2c_client, which may later be
	 * pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE.
	 *
	 * This client is ** NEVER REGISTERED ** with the driver model
	 * or I2C core code!!  It just holds private copies of addressing
	 * information and maybe a PEC flag.
	 */
	client = kzalloc(sizeof(*client), GFP_KERNEL);
	if (!client) {
		i2c_put_adapter(adap);
		return -ENOMEM;
	}
	snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr);

	client->adapter = adap;
	//set the slave addr

	client->addr = SLAVE_ADDRE;
	//file->private_data = client;

	printk("\n%s opening\n", DEVICE_NAME);

	return 0;
}
开发者ID:TWood67，项目名称:CSE438，代码行数:31，代码来源:i2c_flash.c


示例8: i2cdev_open

static int i2cdev_open(struct inode *inode, struct file *file)
{
	unsigned int minor = iminor(inode);
	struct i2c_client *client;
	struct i2c_adapter *adap;
	struct i2c_dev *i2c_dev;

	i2c_dev = i2c_dev_get_by_minor(minor);
	if (!i2c_dev)
		return -ENODEV;

	adap = i2c_get_adapter(i2c_dev->adap->nr);
	if (!adap)
		return -ENODEV;

	client = kmalloc(sizeof(*client), GFP_KERNEL);
	if (!client) {
		i2c_put_adapter(adap);
		return -ENOMEM;
	}
	memcpy(client, &i2cdev_client_template, sizeof(*client));

	/* registered with adapter, passed as client to user */
	client->adapter = adap;
	file->private_data = client;

	return 0;
}
开发者ID:ena30，项目名称:snake-os，代码行数:28，代码来源:i2c-dev.c


示例9: i2c_get_adapter

/*
 * Sensor subdevice helper functions
 */
static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd,
				   struct fimc_sensor_info *s_info)
{
	struct i2c_adapter *adapter;
	struct v4l2_subdev *sd = NULL;

	if (!s_info || !fmd)
		return NULL;

	adapter = i2c_get_adapter(s_info->pdata.i2c_bus_num);
	if (!adapter) {
		v4l2_warn(&fmd->v4l2_dev,
			  "Failed to get I2C adapter %d, deferring probe\n",
			  s_info->pdata.i2c_bus_num);
		return ERR_PTR(-EPROBE_DEFER);
	}
	sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter,
				       s_info->pdata.board_info, NULL);
	if (IS_ERR_OR_NULL(sd)) {
		i2c_put_adapter(adapter);
		v4l2_warn(&fmd->v4l2_dev,
			  "Failed to acquire subdev %s, deferring probe\n",
			  s_info->pdata.board_info->type);
		return ERR_PTR(-EPROBE_DEFER);
	}
	v4l2_set_subdev_hostdata(sd, s_info);
	sd->grp_id = SENSOR_GROUP_ID;

	v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice %s\n",
		  s_info->pdata.board_info->type);
	return sd;
}
开发者ID:AllenDou，项目名称:linux，代码行数:35，代码来源:fimc-mdevice.c


示例10: minnow_module_exit

static void __exit minnow_module_exit(void)
{
	i2c_unregister_device(client);
	i2c_put_adapter(adap);

	pr_info("exited\n");
}
开发者ID:Rashed97，项目名称:mcp9808，代码行数:7，代码来源:minnow.c


示例11: i2c_get_adapter

/*
 * Sensor subdevice helper functions
 */
static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd,
				   struct fimc_sensor_info *s_info)
{
	struct i2c_adapter *adapter;
	struct v4l2_subdev *sd = NULL;

	if (!s_info || !fmd)
		return NULL;

	adapter = i2c_get_adapter(s_info->pdata->i2c_bus_num);
	if (!adapter)
		return NULL;
	sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter,
				       s_info->pdata->board_info, NULL);
	if (IS_ERR_OR_NULL(sd)) {
		i2c_put_adapter(adapter);
		v4l2_err(&fmd->v4l2_dev, "Failed to acquire subdev\n");
		return NULL;
	}
	v4l2_set_subdev_hostdata(sd, s_info);
	sd->grp_id = SENSOR_GROUP_ID;

	v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice %s\n",
		  s_info->pdata->board_info->type);
	return sd;
}
开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:29，代码来源:fimc-mdevice.c


示例12: tegra_camera_disable

static void tegra_camera_disable(struct nvhost_device *ndev)
{
	struct i2c_adapter *adapter;

	gpio_set_value_cansleep(TEGRA_CAMERA_GPIO_PMU, 0);
	gpio_set_value(TEGRA_CAMERA_GPIO_VI_GP3, 0);
	gpio_set_value(TEGRA_CAMERA_GPIO_CAM_PWR_EN, 0);

	gpio_free(TEGRA_CAMERA_GPIO_PMU);
	gpio_free(TEGRA_CAMERA_GPIO_VI_GP3);
	gpio_free(TEGRA_CAMERA_GPIO_CAM_PWR_EN);

	adapter = i2c_get_adapter(TEGRA_CAMERA_I2C_ADAPTER_ID);
	BUG_ON(!adapter);
	i2c_unregister_device(port_switch);
	i2c_unregister_device(port_expander);
	i2c_put_adapter(adapter);

	BUG_ON(!regulator);
	regulator_disable(regulator);
	regulator_put(regulator);
	regulator = NULL;

	/* Turn off relevant clocks. */
	clk_disable(clk_vi);
	clk_disable(clk_vi_sensor);
	clk_disable(clk_csi);
	clk_disable(clk_isp);
	clk_disable(clk_csus);
}
开发者ID:Kernelhacker，项目名称:2.6.38.3-Adam，代码行数:30，代码来源:board-seaboard-sensors.c


示例13: zpad80_pmu_dev_init

static int __init zpad80_pmu_dev_init(void)
{
	struct i2c_adapter *adap;
	struct i2c_client *client;
	int busnum = PMU_I2C_BUSNUM;
	int i;

	adap = i2c_get_adapter(busnum);
	if (!adap) {
		pr_err("failed to get adapter i2c%d\n", busnum);
		return -1;
	}

	client = i2c_new_device(adap, &zpad80_pmu_board_info);
	if (!client) {
		pr_err("failed to register pmu to i2c%d\n", busnum);
		return -1;
	}

	i2c_put_adapter(adap);

	for (i = 0; i < ARRAY_SIZE(fixed_regulator_devices); i++)
		fixed_regulator_devices[i]->id = i;

	return platform_add_devices(fixed_regulator_devices,
				    ARRAY_SIZE(fixed_regulator_devices));
}
开发者ID:piet-delaney，项目名称:KERNEL-NPM801，代码行数:27，代码来源:zpad80-regulator.c


示例14: tviu800_init_onboard_video

/*
 * tviu800_init_onboard_video
 */
static int __init tviu800_init_onboard_video(void)
{
	struct i2c_adapter *adap;

	/*
	 * Use the VFB device for the onboard display
	 */
	platform_device_register(&tviu800_vfb_device);

	platform_device_register(&tviu800_backlight_device);

	/* turn on LCD power */
	tviu800_lcdpower_data.vgh_gpio = GPIO_RC_24;
	platform_device_register(&tviu800_lcdpower_device);

	adap = i2c_get_adapter(0);
	if (!adap) {
		printk(KERN_WARNING "%s: Failed to get i2c adapter\n", __FUNCTION__);
		return -ENODEV;
	}

	printk(KERN_INFO "%s: registering touch screen controller resources\n", __FUNCTION__);

	i2c_new_device(adap, &tviu800_touch_i2c_board_info);

	i2c_put_adapter(adap);

	return 0;
}
开发者ID:kizukukoto，项目名称:WDN900_GPL，代码行数:32，代码来源:board-tviu800.c


示例15: ct36x_ts_init

static int __init ct36x_ts_init(void)
{
	struct i2c_adapter *adapter;
	struct i2c_client *client;

	printk("VTL ct36x TouchScreen driver, <[email protected]>.\n");
	printk("Patched by Astralix of crewrktablets.arctablets.com.\n");

	// Init Platform data
	ct36x_ts.i2c_bus = CT36X_TS_I2C_BUS;
	ct36x_ts.i2c_address =	CT36X_TS_I2C_ADDRESS;

	adapter = i2c_get_adapter(ct36x_ts.i2c_bus);
	if ( !adapter ) {
		printk("Unable to get i2c adapter on bus %d.\n", ct36x_ts.i2c_bus);
		return -ENODEV;
	}

	client = i2c_new_device(adapter, i2c_board_info);
	i2c_put_adapter(adapter);
	if (!client) {
		printk("Unable to create i2c device on bus %d.\n", ct36x_ts.i2c_bus);
		return -ENODEV;
	}

	ct36x_ts.client = client;
	i2c_set_clientdata(client, &ct36x_ts);

	return i2c_add_driver(&ct36x_ts_driver);
}
开发者ID:Root2Technologies，项目名称:rk3x_kernel_3.0.36，代码行数:30，代码来源:ct36x_i2c_ts.c


示例16: xeno_i2c_init

/* Initializing i2c driver from the kernel space */
int xeno_i2c_init(void) {
	unsigned int minor = 0;

	struct i2c_adapter *adap;
	struct i2c_dev *i2c_dev;

	i2c_dev = i2c_dev_get_by_minor(minor);
	if (!i2c_dev)
		return -ENODEV;

	adap = i2c_get_adapter(i2c_dev->adap->nr);

	if (!adap)
		return -ENODEV;

	client = kmalloc(sizeof(*client), GFP_KERNEL);
	if (!client) {
		i2c_put_adapter(adap);
		return -ENOMEM;
	}
	memcpy(client, &i2cdev_client_template, sizeof(*client));

	/* registered with adapter, passed as client to user */
	client->adapter = adap;

	return 0;
}
开发者ID:ozwin，项目名称:iem-space-invader，代码行数:28，代码来源:xeno-i2c.c


示例17: wm8731_i2c_register

/* 
 * FIXME: This is a temporary bodge to avoid cross-tree merge issues. 
 * New drivers should register the wm8731 I2C device in the machine 
 * setup code (under arch/arm for ARM systems). 
 */
static int wm8731_i2c_register(void)
{
    struct i2c_board_info info;
    struct i2c_adapter *adapter;
    struct i2c_client *client;
    
    alsa_dbg("%s() \n", __func__);

    memset(&info, 0, sizeof(struct i2c_board_info));
    info.addr = 0x1a;
    strlcpy(info.type, "wm8731", I2C_NAME_SIZE);

    adapter = i2c_get_adapter(0);

    if (!adapter) 
    {
        printk(KERN_ERR "can't get i2c adapter 0\n");
        return -ENODEV;
    }

    client = i2c_new_device(adapter, &info);
    i2c_put_adapter(adapter);
    if (!client) 
    {
        printk(KERN_ERR "can't add i2c device at 0x%x\n", (unsigned int)info.addr);
        return -ENODEV;
    }
    return 0;
}
开发者ID:AmesianX，项目名称:telechips-linux，代码行数:34，代码来源:tcc_board_wm8731.c


示例18: HC548_attach_adapter

int HC548_attach_adapter(void)
{
    struct i2c_board_info info;
    struct i2c_client *client;
    struct i2c_adapter *adapter;
    int ret1;

    pr_pos_info();

    adapter = i2c_get_adapter(I2C_BUS_NUM);
    if(adapter == NULL)
    {
        pr_red_info("HC548 I2C get adapter %d failed\n", I2C_BUS_NUM);
        ret1 = -ENODEV;
        goto out_exit;
    }

    memset(&info, 0, sizeof(struct i2c_board_info));
    strlcpy(info.type, "HC548", I2C_NAME_SIZE);
    info.addr = HC548_SLAVE_ADDR;
    client = i2c_new_device(adapter, &info);
    if(client == NULL)
    {
        pr_red_info("HC548 I2C new device failed\n");
        ret1 = -ENODEV;
        goto out_put_adapter;
    }
    return 0;

out_put_adapter:
    i2c_put_adapter(adapter);
out_exit:
    return ret1;

}
开发者ID:advx9600，项目名称:kernel-4.4-RuiEr，代码行数:35，代码来源:hc8600.c


示例19: i2c_writes

static int i2c_writes(int id, int addr, char *buf, int bytes)
{
	struct i2c_adapter *adap;
	struct i2c_msg msg;
	int ret;

	if ((id < 0) || (addr < 0)) {
		printk("%s: Please set i2c id and addr.\n",__func__);
		return -EINVAL;
	}

	adap = i2c_get_adapter(id);
	if (!adap)
		return -EINVAL;
	msg.addr = addr;
	msg.flags = 0;
	msg.len = bytes;
	msg.buf = buf;
	msg.scl_rate = 100 * 1000;
	msg.udelay = 5;

	ret = i2c_transfer(adap, &msg, 1);
	i2c_put_adapter(adap);
	return (ret == 1) ? bytes: ret;
}
开发者ID:chengdongdong，项目名称:codes，代码行数:25，代码来源:i2c-test.c


示例20: sx1_i2c_read_byte

/* Read from I2C device */
int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
{
	struct i2c_adapter *adap;
	int err;
	struct i2c_msg msg[1];
	unsigned char data[2];

	adap = i2c_get_adapter(0);
	if (!adap)
		return -ENODEV;

	msg->addr = devaddr;	/* I2C address of chip */
	msg->flags = 0;
	msg->len = 1;
	msg->buf = data;
	data[0] = regoffset;	/* register num */
	err = i2c_transfer(adap, msg, 1);

	msg->addr = devaddr;	/* I2C address */
	msg->flags = I2C_M_RD;
	msg->len = 1;
	msg->buf = data;
	err = i2c_transfer(adap, msg, 1);
	*value = data[0];
	i2c_put_adapter(adap);

	if (err >= 0)
		return 0;
	return err;
}
开发者ID:4atty，项目名称:linux，代码行数:31，代码来源:board-sx1.c



注：本文中的i2c_put_adapter函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ i2c_read函数代码示例发布时间：2022-05-30
下一篇：
C++ i2c_new_dummy函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap