C++ g_key_file_set_string函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中g_key_file_set_string函数的典型用法代码示例。如果您正苦于以下问题：C++ g_key_file_set_string函数的具体用法？C++ g_key_file_set_string怎么用？C++ g_key_file_set_string使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了g_key_file_set_string函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: handle_wcs_data

static int handle_wcs_data(const uint8_t *tlv_msg, int length)
{
	struct wifi_sc *wsc = NULL;
	GKeyFile *keyfile = NULL;
	int ret = -EINVAL;

	wsc = decode_from_tlv(tlv_msg, length);
	if (!wsc)
		return -EINVAL;

	if (!wsc->ssid)
		goto out;

	keyfile = g_key_file_new();
	if (!keyfile) {
		ret = -ENOMEM;
		goto out;
	}

	g_key_file_set_string(keyfile, NEARD_SERVICE_GROUP,
					SERVICE_KEY_TYPE, "wifi");
	g_key_file_set_string(keyfile, NEARD_SERVICE_GROUP,
					SERVICE_KEY_SSID, wsc->ssid);
	g_key_file_set_boolean(keyfile, NEARD_SERVICE_GROUP,
					SERVICE_KEY_HIDDEN, TRUE);

	if (wsc->passphrase)
		g_key_file_set_string(keyfile, NEARD_SERVICE_GROUP,
				SERVICE_KEY_PASSPHRASE, wsc->passphrase);

	ret = connman_config_provision_mutable_service(keyfile);

out:
	g_key_file_unref(keyfile);
	free_wifi_sc(wsc);
	return ret;
}

开发者ID:drgogeta86，项目名称:connman，代码行数:37，代码来源:neard.c

示例2: sat_pref_layout_ok

/** User pressed OK. Any changes should be stored in config. */
void sat_pref_layout_ok(GKeyFile * cfg)
{
    if (dirty)
    {
        /* we have new settings */
        if (cfg != NULL)
        {
            g_key_file_set_string(cfg,
                                  MOD_CFG_GLOBAL_SECTION,
                                  MOD_CFG_GRID,
                                  gtk_entry_get_text(GTK_ENTRY(gridstr)));
        }
        else
        {
            sat_cfg_set_str(SAT_CFG_STR_MODULE_GRID,
                            gtk_entry_get_text(GTK_ENTRY(gridstr)));
            sat_cfg_set_bool(SAT_CFG_BOOL_MAIN_WIN_POS,
                             gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON
                                                          (mwin)));
            sat_cfg_set_bool(SAT_CFG_BOOL_MOD_WIN_POS,
                             gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON
                                                          (mod)));
            sat_cfg_set_bool(SAT_CFG_BOOL_MOD_STATE,
                             gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON
                                                          (state)));
        }
    }
    else if (reset)
    {
        /* we have to reset the values to global or default settings */
        if (cfg == NULL)
        {
            /* layout */
            sat_cfg_reset_str(SAT_CFG_STR_MODULE_GRID);

            /* window placement */
            sat_cfg_reset_bool(SAT_CFG_BOOL_MAIN_WIN_POS);
            sat_cfg_reset_bool(SAT_CFG_BOOL_MOD_WIN_POS);
            sat_cfg_reset_bool(SAT_CFG_BOOL_MOD_STATE);
        }
        else
        {
            g_key_file_remove_key((GKeyFile *) (cfg),
                                  MOD_CFG_GLOBAL_SECTION, MOD_CFG_GRID, NULL);
        }
    }
    dirty = FALSE;
    reset = FALSE;
}

开发者ID:bastla，项目名称:gpredict，代码行数:50，代码来源:sat-pref-layout.c

示例3: save_state

static gboolean
save_state (time_t   mtime,
            gchar  **converted)
{
  gchar *filename;
  GKeyFile *keyfile;
  gchar *str;
  GError *error;
  gboolean result;

  /* Make sure the state directory exists */
  if (g_mkdir_with_parents (g_get_user_data_dir (), 0755))
    {
      g_printerr ("Failed to create directory %s: %s\n",
                  g_get_user_data_dir (), g_strerror (errno));
      return FALSE;
    }

  filename = g_build_filename (g_get_user_data_dir (), "mateconf-gsettings-data-convert", NULL);
  keyfile = g_key_file_new ();

  str = g_strdup_printf ("%ld", mtime);
  g_key_file_set_string (keyfile,
                         "State", "timestamp", str);
  g_free (str);

  g_key_file_set_string_list (keyfile,
                              "State", "converted",
                              (const gchar * const *)converted, g_strv_length (converted));

  str = g_key_file_to_data (keyfile, NULL, NULL);
  g_key_file_free (keyfile);

  error = NULL;
  if (!g_file_set_contents (filename, str, -1, &error))
    {
      g_printerr ("%s\n", error->message);
      g_error_free (error);

      result = FALSE;
    }
  else
    result = TRUE;

  g_free (filename);
  g_free (str);

  return result;
}

开发者ID:fatman2021，项目名称:mate-conf，代码行数:49，代码来源:mateconf-gsettings-data-convert.c

示例4: gnc_save_all_state

/** Save all persistent program state to disk.  This function finds the
 *  name of the "new" state file associated with a specific book guid.
 *  It saves some top level data, then iterates through the list of
 *  open windows calling a helper function to save each window.
 *
 *  @note The name of the state file is based on the name of the data
 *  file, not the path name of the data file.  If there are multiple
 *  data files with the same name, the state files will be suffixed
 *  with a number.  E.G. test_account, test_account_2, test_account_3,
 *  etc.
 *
 *  @param session The QofSession whose state should be saved.
 *
 *  @param unused */
static void
gnc_save_all_state (gpointer session, gpointer unused)
{
    QofBook *book;
    gchar guid_string[GUID_ENCODING_LENGTH+1];
    const GncGUID *guid;
    GKeyFile *keyfile = NULL;

    keyfile = gnc_state_get_current ();
    if (keyfile)
    {
        /* Remove existing Window and Page groups from the keyfile
         * They will be regenerated.
         */
        gsize num_groups, curr;
        gchar **groups = g_key_file_get_groups (keyfile, &num_groups);
        for (curr=0; curr < num_groups; curr++)
        {
            if (g_str_has_prefix (groups[curr], "Window ") ||
                    g_str_has_prefix (groups[curr], "Page "))
            {
                DEBUG ("Removing state group %s", groups[curr]);
                g_key_file_remove_group (keyfile, groups[curr], NULL);
            }
        }
        g_strfreev (groups);
    }

    /* Store the book's GncGUID in the top level group */
    book = qof_session_get_book(session);
    guid = qof_entity_get_guid(QOF_INSTANCE(book));
    guid_to_string_buff(guid, guid_string);
    g_key_file_set_string(keyfile, STATE_FILE_TOP, STATE_FILE_BOOK_GUID,
                          guid_string);

    gnc_main_window_save_all_windows(keyfile);

#ifdef DEBUG
    /*  Debugging: dump a copy to the trace log */
    {
        gchar *file_data;
        gsize file_length;
        file_data = g_key_file_to_data(keyfile, &file_length, NULL);
        DEBUG("=== File Data Written===\n%s\n=== File End ===\n", file_data);
        g_free(file_data);
    }
#endif
    LEAVE("");
}

开发者ID:Gnucash，项目名称:gnucash，代码行数:63，代码来源:top-level.c

示例5: hlfs_get_inode_info_setup

static void 
hlfs_get_inode_info_setup(Fixture *fixture, const void *data) {
	const char *test_dir = (const char *)data;
	g_print("test env dir is %s\n", test_dir);
	char *fs_dir = g_build_filename(test_dir, "testfs", NULL);
//	g_assert(g_mkdir(fs_dir, 0700) == 0);
	char *uri = g_malloc0(128);
	g_assert(uri != NULL);
	snprintf(uri, 128, "%s%s", "local://", fs_dir);
//	char *uri = g_build_path(tmp, fs_dir, NULL);
	g_print("uri is %s\n", uri);
	pid_t status;
	const char cmd[256];
	memset((char *) cmd, 0, 256);
	sprintf((char *) cmd, "%s %s %s %s %d %s %d %s %d", "../mkfs.hlfs", 
								"-u", uri,
								"-b", 8192,
								"-s", 67108864,
								"-m", 1024);
	g_message("cmd is [%s]", cmd);
	status = system(cmd);
#if 0
	GKeyFile *sb_keyfile = g_key_file_new();
	g_key_file_set_string(sb_keyfile, "METADATA", "uri", uri);
	g_key_file_set_integer(sb_keyfile, "METADATA", "block_size", 8196);
	g_key_file_set_integer(sb_keyfile, "METADATA", "segment_size", 67108864);
	g_key_file_set_integer(sb_keyfile, "METADATA", "max_fs_size", 671088640);
	gchar *content = g_key_file_to_data(sb_keyfile, NULL, NULL);
	char *sb_file_path = g_build_filename(fs_dir, "superblock", NULL);
	g_print("sb file path is %s\n", sb_file_path);
	GError *error = NULL;
	if (TRUE != g_file_set_contents(sb_file_path, content, strlen(content) + 1, &error)) {
		g_print("error msg is %s", error->message);
		error = NULL;
	}
#endif
	fixture->uri = uri;
	g_print("fixture->uri is %s\n", fixture->uri);
	fixture->ctrl = init_hlfs(fixture->uri);
	g_assert(fixture->ctrl != NULL);
	int ret = hlfs_open(fixture->ctrl, 1);
	g_assert(ret == 0);
	take_snapshot(fixture, data);
	test_hlfs_find_inode_before_time(fixture, data);
//	g_key_file_free(sb_keyfile);
//	g_free(sb_file_path);
	g_free(fs_dir);
	return ;
}

开发者ID:baibaibai，项目名称:hlfs，代码行数:49，代码来源:test_hlfs_get_inode_info.c

示例6: goa_utils_keyfile_set_string

void
goa_utils_keyfile_set_string (GoaAccount *account, const gchar *key, const gchar *value)
{
  GError *error;
  GKeyFile *key_file;
  gchar *contents;
  gchar *group;
  gchar *path;
  gsize length;

  contents = NULL;

  path = g_strdup_printf ("%s/goa-1.0/accounts.conf", g_get_user_config_dir ());
  group = g_strdup_printf ("Account %s", goa_account_get_id (account));

  key_file = g_key_file_new ();
  error = NULL;
  if (!g_key_file_load_from_file (key_file,
                                  path,
                                  G_KEY_FILE_KEEP_COMMENTS | G_KEY_FILE_KEEP_TRANSLATIONS,
                                  &error))
    {
      g_warning ("Error loading keyfile %s: %s (%s, %d)",
                 path,
                 error->message,
                 g_quark_to_string (error->domain),
                 error->code);
      g_error_free (error);
      goto out;
    }

  g_key_file_set_string (key_file, group, key, value);
  contents = g_key_file_to_data (key_file, &length, NULL);

  error = NULL;
  if (!g_file_set_contents (path, contents, length, &error))
    {
      g_prefix_error (&error, "Error writing key-value-file %s: ", path);
      g_warning ("%s (%s, %d)", error->message, g_quark_to_string (error->domain), error->code);
      g_error_free (error);
      goto out;
    }

 out:
  g_free (contents);
  g_key_file_free (key_file);
  g_free (group);
  g_free (path);
}

开发者ID:abprime，项目名称:gnome-online-accounts，代码行数:49，代码来源:goautils.c

示例7: mc_config_set_string

void
mc_config_set_string (const mc_config_t * mc_config, const gchar * group,
                      const gchar * param, const gchar * value)
{
    gchar *buffer;

    if (!mc_config || !group || !param || !value)
        return;

    buffer = mc_config_normalize_before_save (value);

    g_key_file_set_string (mc_config->handle, group, param, buffer);

    g_free (buffer);
}

开发者ID:MidnightCommander，项目名称:mc，代码行数:15，代码来源:set.c

示例8: on_save_preferences

static void
on_save_preferences (Viewer *viewer, GKeyFile *keyfile, void *user_data)
{
    RendererCamThumb *self = user_data;
    GPtrArray *keys = gu_hash_table_get_keys(self->cam_handlers);

    for (int k = 0; k < g_ptr_array_size(keys); k++) {
        char *key = g_ptr_array_index(keys, k);
        cam_renderer_t *cr = g_hash_table_lookup(self->cam_handlers, key);

        char str[80];
        sprintf (str, "%d %d", cr->render_place, cr->expanded);
        g_key_file_set_string (keyfile, RENDERER_NAME, key, str);
    }
}

开发者ID:BIANZiyang，项目名称:3PRE，代码行数:15，代码来源:renderer_cam_thumb.c

示例9: add_remote_to_keyfile

static gboolean
add_remote_to_keyfile (GKeyFile       *new_keyfile,
                       const char     *key,
                       const char     *url,
                       GPtrArray      *branches,
                       GError        **error)
{
  gboolean ret = FALSE;
  char **iter;

  g_key_file_set_string (new_keyfile, key, "url", url);

  for (iter = opt_set; iter && *iter; iter++)
    {
      const char *keyvalue = *iter;
      gs_free char *subkey = NULL;
      gs_free char *subvalue = NULL;

      if (!parse_keyvalue (keyvalue, &subkey, &subvalue, error))
        goto out;

      g_key_file_set_string (new_keyfile, key, subkey, subvalue);
    }

  if (branches->len > 0)
    g_key_file_set_string_list (new_keyfile, key, "branches",
                                    (const char *const *)branches->pdata,
                                branches->len);
  
  if (opt_no_gpg_verify)
    g_key_file_set_boolean (new_keyfile, key, "gpg-verify", FALSE);

  ret = TRUE;
 out:
  return ret;
}

开发者ID:aloverso，项目名称:ostree-1，代码行数:36，代码来源:ot-builtin-remote.c

示例10: keystore_store_key

/**
 * Sets a key in the key store file.
 */
bool keystore_store_key(const char *nick, const char *key) {
    const char *password;
    char *encrypted;
    char *wrapped;
    bool ok = false;
    GKeyFile *keyfile = getConfigFile();
    
    // Remove old key
    delete_nick(keyfile, nick);
    
    // Add new key
    password = get_keystore_password();
    if (password) {
        // Encrypt the password
        encrypted = fish_encrypt(password, strlen(password), key);
        if (!encrypted) goto end;
        
        // Prepend "+OK "
        wrapped = g_strconcat("+OK ", encrypted, NULL);
        g_free(encrypted);
        
        // Store encrypted in file
        g_key_file_set_string(keyfile, nick, "key", wrapped);
        free(wrapped);
    } else {
        // Store unencrypted in file
        g_key_file_set_string(keyfile, nick, "key", key);
    }
    
    // Save key store file
    ok = save_keystore(keyfile);
    
  end:
    g_key_file_free(keyfile);
    return ok;
}

开发者ID:94m3k1n9，项目名称:hexchat，代码行数:39，代码来源:keystore.c

示例11: create_conf_file

/* create basic conffile with sensible defaults */
static void create_conf_file(void)
{
  GKeyFile *settingsfile;
  gchar *keyfile;

  mkdir(CONFIG_FILE_DIR, 0755);

  settingsfile = g_key_file_new();

  g_key_file_set_string(settingsfile, MODE_SETTING_ENTRY, MODE_SETTING_KEY, MODE_DEVELOPER );
  keyfile = g_key_file_to_data (settingsfile, NULL, NULL);
  if(g_file_set_contents(FS_MOUNT_CONFIG_FILE, keyfile, -1, NULL) == 0)
	log_debug("Conffile creation failed. Continuing without configuration!\n");
  g_key_file_free(settingsfile);
}

开发者ID:d0b3rm4n，项目名称:usb-moded，代码行数:16，代码来源:usb_moded-config.c

示例12: policy_allowed_bearers

static void policy_allowed_bearers(const char *allowed_bearers)
{
	struct passwd *pwd;
	uid_t uid;
	char *pathname;
	GKeyFile *keyfile;

	LOG("update to '%s'", allowed_bearers);

	uid = getuid();
	pwd = getpwuid(uid);
	g_assert(pwd);

	keyfile = g_key_file_new();
	g_key_file_set_string(keyfile, "policy_foo", "uid", pwd->pw_name);
	g_key_file_set_string(keyfile, "policy_foo", "AllowedBearers",
				allowed_bearers);

	pathname = g_strdup_printf("%s/foo.policy", POLICYDIR);
	policy_save(keyfile, pathname);

	g_free(pathname);
	g_key_file_unref(keyfile);
}

开发者ID:hmallat，项目名称:connman，代码行数:24，代码来源:session-test.c

示例13: cairo_dock_add_remove_element_to_key

void cairo_dock_add_remove_element_to_key (const gchar *cConfFilePath, const gchar *cGroupName, const gchar *cKeyName, gchar *cElementName, gboolean bAdd)
{
	GKeyFile *pKeyFile = cairo_dock_open_key_file (cConfFilePath);
	if (pKeyFile == NULL)
		return ;
	
	gchar *cElementList = g_key_file_get_string (pKeyFile, cGroupName, cKeyName, NULL), *cNewElementList = NULL;
	if (cElementList != NULL && *cElementList == '\0')
	{
		g_free (cElementList);
		cElementList= NULL;
	}
	
	if (bAdd)
	{
		//g_print ("on rajoute %s\n", cElementName);
		if (cElementList != NULL)
			cNewElementList = g_strdup_printf ("%s;%s", cElementList, cElementName);
		else
			cNewElementList = g_strdup (cElementName);
	}
	else
	{
		//g_print ("on enleve %s\n", cElementName);
		gchar *str = g_strstr_len (cElementList, strlen (cElementList), cElementName);
		g_return_if_fail (str != NULL);
		if (str == cElementList)
		{
			if (str[strlen (cElementName)] == '\0')
				cNewElementList = g_strdup ("");
			else
				cNewElementList = g_strdup (str + strlen (cElementName) + 1);
		}
		else
		{
			*(str-1) = '\0';
			if (str[strlen (cElementName)] == '\0')
				cNewElementList = g_strdup (cElementList);
			else
				cNewElementList = g_strdup_printf ("%s;%s", cElementList, str + strlen (cElementName) + 1);
		}
	}
	g_key_file_set_string (pKeyFile, cGroupName, cKeyName, cNewElementList);
	cairo_dock_write_keys_to_file (pKeyFile, cConfFilePath);
	g_free (cElementList);
	g_free (cNewElementList);
	g_key_file_free (pKeyFile);
}

开发者ID:BackupTheBerlios，项目名称:cairo-dock-svn，代码行数:48，代码来源:cairo-dock-keyfile-utilities.c

示例14: anjuta_session_set_string

/**
 * anjuta_session_set_string:
 * @session: an #AnjutaSession object
 * @section: Section.
 * @key: Key name.
 * @value: Key value
 *
 * Set a string @value to @key in given @section.
 */
void
anjuta_session_set_string (AnjutaSession *session, const gchar *section,
						   const gchar *key, const gchar *value)
{
	g_return_if_fail (ANJUTA_IS_SESSION (session));
	g_return_if_fail (section != NULL);
	g_return_if_fail (key != NULL);

	if (!value)
	{
		g_key_file_remove_key (session->priv->key_file, section, key, NULL);
		return;
	}

	g_key_file_set_string (session->priv->key_file, section, key, value);
}

开发者ID:GNOME，项目名称:anjuta，代码行数:25，代码来源:anjuta-session.c

示例15: gather_unlock_options

/**
* builder: the gtk builder object
* dialog: The dialog to extract the data from
*
* Gets the unlocking settings and stores them in output_data
*
**/
static void
gather_unlock_options (GtkBuilder *builder, GtkDialog *dialog)
{
	GcrUnlockOptionsWidget *unlock;
	const gchar *choice;

	unlock = g_object_get_data (G_OBJECT (dialog), "unlock-options-widget");

	choice = gcr_unlock_options_widget_get_choice (unlock);
	if (choice) {
		g_key_file_set_integer (output_data, "unlock-options", "ttl",
		                        gcr_unlock_options_widget_get_ttl (unlock));

		g_key_file_set_string (output_data, "unlock-options", "choice", choice);
	}
}

开发者ID:bhull2010，项目名称:mate-keyring，代码行数:23，代码来源:gku-prompt-tool.c

示例16: remmina_pref_set_value

void
remmina_pref_set_value (const gchar *key, const gchar *value)
{
    GKeyFile *gkeyfile;
    gchar *content;
    gsize length;

    gkeyfile = g_key_file_new ();
    g_key_file_load_from_file (gkeyfile, remmina_pref_file, G_KEY_FILE_NONE, NULL);
    g_key_file_set_string (gkeyfile, "remmina_pref", key, value);
    content = g_key_file_to_data (gkeyfile, &length, NULL);
    g_file_set_contents (remmina_pref_file, content, length, NULL);

    g_key_file_free (gkeyfile);
    g_free (content);
}

开发者ID:awakecoding，项目名称:Remmina，代码行数:16，代码来源:remminapref.c

示例17: set_network_setting

/*
 * @param config : the key to be set
 * @param setting : The value to be set
 */
set_config_result_t set_network_setting(const char *config, const char *setting)
{
  GKeyFile *settingsfile;
  gboolean test = FALSE;
  gchar *keyfile;

  if(!strcmp(config, NETWORK_IP_KEY) || !strcmp(config, NETWORK_GATEWAY_KEY))
	if(validate_ip(setting) != 0)
		return SET_CONFIG_ERROR;

  settingsfile = g_key_file_new();
  test = g_key_file_load_from_file(settingsfile, FS_MOUNT_CONFIG_FILE, G_KEY_FILE_NONE, NULL);

  if(!strcmp(config, NETWORK_IP_KEY) || !strcmp(config, NETWORK_INTERFACE_KEY) || !strcmp(config, NETWORK_GATEWAY_KEY))
  {
	set_config_result_t ret = SET_CONFIG_ERROR;
	if (test)
	{
		if(config_value_changed(settingsfile, NETWORK_ENTRY, config, setting))
		{
			g_key_file_free(settingsfile);
			return SET_CONFIG_UNCHANGED;
		}
	}
	else
	{
		log_debug("No conffile. Creating.\n");
		create_conf_file();
	}

	g_key_file_set_string(settingsfile, NETWORK_ENTRY, config, setting);
  	keyfile = g_key_file_to_data (settingsfile, NULL, NULL); 
  	/* free the settingsfile before writing things out to be sure 
     	the contents will be correctly written to file afterwards.
     	Just a precaution. */
  	g_key_file_free(settingsfile);
	if (g_file_set_contents(FS_MOUNT_CONFIG_FILE, keyfile, -1, NULL))
		ret = SET_CONFIG_UPDATED;
	free(keyfile);
	return ret;
  }
  else
  {
	g_key_file_free(settingsfile);
	return SET_CONFIG_ERROR;
  }
}

开发者ID:merlin1991，项目名称:usb-moded，代码行数:51，代码来源:usb_moded-config.c

示例18: save_config

static void
save_config( GKeyFile *file )
{
    GKeyFile *config = pgm_main_window_get_config();

    g_key_file_set_boolean( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "AutoIndent",
                            gtk_toggle_button_get_active( GTK_TOGGLE_BUTTON( auto_indent ) ) );
    g_key_file_set_boolean( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "IndentOnTab",
                            gtk_toggle_button_get_active( GTK_TOGGLE_BUTTON( indent_on_tab ) ) );
    g_key_file_set_boolean( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "ShowLineNumbers",
                            gtk_toggle_button_get_active( GTK_TOGGLE_BUTTON( show_line_numbers ) ) );
    g_key_file_set_boolean( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "SmartHomeEnd",
                            gtk_toggle_button_get_active( GTK_TOGGLE_BUTTON( smart_home_end ) ) );
    g_key_file_set_boolean( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "InsertSpacesInsteadOfTab",
                            gtk_toggle_button_get_active( GTK_TOGGLE_BUTTON( insert_spaces_instead_of_tabs ) ) );
    g_key_file_set_boolean( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "HighlightCurrentLine",
                            gtk_toggle_button_get_active( GTK_TOGGLE_BUTTON( highlight_current_line ) ) );
    g_key_file_set_integer( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "IndentWidth",
                            gtk_spin_button_get_value_as_int( GTK_SPIN_BUTTON( indent_width_editor ) ) );
    g_key_file_set_integer( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "TabWidth",
                            gtk_spin_button_get_value_as_int( GTK_SPIN_BUTTON( tab_width_editor ) ) );
    g_key_file_set_string( config,
                           PGM_SQL_EDITOR_CONFIG_GROUP,
                           "Font",
                           gtk_font_button_get_font_name( GTK_FONT_BUTTON( font_editor ) ) );
    g_key_file_set_integer( config,
                            PGM_SQL_EDITOR_CONFIG_GROUP,
                            "DrawSpaces",
                            gtk_combo_box_get_active( GTK_COMBO_BOX( draw_spaces_editor ) ) );
    pgm_sql_editor_reload_config();
}

开发者ID:Torvus，项目名称:pgmanager，代码行数:47，代码来源:pgmsqleditorpreference.c

示例19: save_settings

void save_settings(Preferences *pref)
{
	gchar *path;
	gchar *dir;
	GKeyFile* key;
	GError *err = NULL;
	gchar *data;
	gsize data_len = 0;
	GtkWidget *dialog;

	path = get_config_path();
	dir = g_dirname(path);
	
	key = g_key_file_new();
	g_key_file_load_from_file(key, path, G_KEY_FILE_KEEP_COMMENTS|G_KEY_FILE_KEEP_TRANSLATIONS, NULL);
	
	g_key_file_set_integer(key, "core", "backend", pref->backend);
	g_key_file_set_string(key, "core", "download_dir", pref->download_dir);
	g_key_file_set_integer(key, "core", "max_concurrent_downloads", pref->max_concurrent_downloads);
	g_key_file_set_boolean(key, "core", "use_schedule", pref->use_schedule);
	g_key_file_set_integer(key, "core", "start_time_hour", pref->start_time_hour);
	g_key_file_set_integer(key, "core", "start_time_minute", pref->start_time_minute);
	g_key_file_set_integer(key, "core", "end_time_hour", pref->end_time_hour);
	g_key_file_set_integer(key, "core", "end_time_minute", pref->end_time_minute);
	
	data = g_key_file_to_data(key, &data_len, &err);
	if (err) {
		dialog = gtk_message_dialog_new (GTK_WINDOW(g_GAria2),
                                  GTK_DIALOG_DESTROY_WITH_PARENT,
                                  GTK_MESSAGE_ERROR,
                                  GTK_BUTTONS_CLOSE,
                                  "Error: %s", err->message);
 		gtk_dialog_run (GTK_DIALOG (dialog));
 		gtk_widget_destroy (dialog);
		g_error_free(err);
	}
	
	if (!g_file_test(dir, G_FILE_TEST_EXISTS)) {
		g_mkdir_with_parents(dir, 0700);
	}
	g_file_set_contents(path, data, data_len, NULL);
	
	g_free(data);
	g_free(path);
	g_free(dir);
	g_key_file_free(key);
}

开发者ID:BackupTheBerlios，项目名称:garia2，代码行数:47，代码来源:preference.c

示例20: _accounts_rename

static gboolean
_accounts_rename(const char * const account_name, const char * const new_name)
{
    if (g_key_file_has_group(accounts, new_name)) {
        return FALSE;
    }

    if (!g_key_file_has_group(accounts, account_name)) {
        return FALSE;
    }

    g_key_file_set_boolean(accounts, new_name, "enabled",
        g_key_file_get_boolean(accounts, account_name, "enabled", NULL));

    g_key_file_set_integer(accounts, new_name, "priority.online",
        g_key_file_get_integer(accounts, account_name, "priority.online", NULL));
    g_key_file_set_integer(accounts, new_name, "priority.chat",
        g_key_file_get_integer(accounts, account_name, "priority.chat", NULL));
    g_key_file_set_integer(accounts, new_name, "priority.away",
        g_key_file_get_integer(accounts, account_name, "priority.away", NULL));
    g_key_file_set_integer(accounts, new_name, "priority.xa",
        g_key_file_get_integer(accounts, account_name, "priority.xa", NULL));
    g_key_file_set_integer(accounts, new_name, "priority.dnd",
        g_key_file_get_integer(accounts, account_name, "priority.dnd", NULL));

    // copy other string properties
    int i;
    for (i = 0; i < ARRAY_SIZE(string_keys); i++) {
        char *value = g_key_file_get_string(accounts, account_name, string_keys[i], NULL);
        if (value != NULL) {
            g_key_file_set_string(accounts, new_name, string_keys[i], value);
            g_free(value);
        }
    }

    g_key_file_remove_group(accounts, account_name, NULL);
    _save_accounts();

    autocomplete_remove(all_ac, account_name);
    autocomplete_add(all_ac, new_name);
    if (g_key_file_get_boolean(accounts, new_name, "enabled", NULL)) {
        autocomplete_remove(enabled_ac, account_name);
        autocomplete_add(enabled_ac, new_name);
    }

    return TRUE;
}

开发者ID:NYAMNYAM3，项目名称:profanity，代码行数:47，代码来源:accounts.c

注：本文中的g_key_file_set_string函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ g_key_file_to_data函数代码示例发布时间：2022-05-30

C++ g_key_file_new函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9668|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ g_key_file_set_string函数代码示例

示例1: handle_wcs_data

示例2: sat_pref_layout_ok

示例3: save_state

示例4: gnc_save_all_state

示例5: hlfs_get_inode_info_setup

示例6: goa_utils_keyfile_set_string

示例7: mc_config_set_string

示例8: on_save_preferences

示例9: add_remote_to_keyfile

示例10: keystore_store_key

示例11: create_conf_file

示例12: policy_allowed_bearers

示例13: cairo_dock_add_remove_element_to_key

示例14: anjuta_session_set_string

示例15: gather_unlock_options

示例16: remmina_pref_set_value

示例17: set_network_setting

示例18: save_config

示例19: save_settings

示例20: _accounts_rename

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

TeamWertarbyte/material-ui-search-bar: M

鲁东大学一米网:Win7系统USB驱动器RAM的操

微信小程序构架

CVE-2022-21554

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053