C++ ff_neterrno函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ff_neterrno函数的典型用法代码示例。如果您正苦于以下问题：C++ ff_neterrno函数的具体用法？C++ ff_neterrno怎么用？C++ ff_neterrno使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ff_neterrno函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: tcp_read

static int tcp_read(URLContext *h, uint8_t *buf, int size)
{
    TCPContext *s = h->priv_data;
    int len, fd_max, ret;
    fd_set rfds;
    struct timeval tv;

    for (;;) {
        if (url_interrupt_cb())
            return AVERROR(EINTR);
        fd_max = s->fd;
        FD_ZERO(&rfds);
        FD_SET(s->fd, &rfds);
        tv.tv_sec = 0;
        tv.tv_usec = 100 * 1000;
        ret = select(fd_max + 1, &rfds, NULL, NULL, &tv);
        if (ret > 0 && FD_ISSET(s->fd, &rfds)) {
            len = recv(s->fd, buf, size, 0);
            if (len < 0) {
                if (ff_neterrno() != FF_NETERROR(EINTR) &&
                    ff_neterrno() != FF_NETERROR(EAGAIN))
                    return AVERROR(errno);
            } else return len;
        } else if (ret < 0) {
            return -1;
        }
    }
}

开发者ID:CarlHuff，项目名称:kgui，代码行数:28，代码来源:tcp.c

示例2: sctp_wait_fd

static int sctp_wait_fd(int fd, int write)
{
    int ev          = write ? POLLOUT : POLLIN;
    struct pollfd p = { .fd = fd, .events = ev, .revents = 0 };
    int ret;

    ret = poll(&p, 1, 100);
    return ret < 0 ? ff_neterrno() : p.revents & ev ? 0 : AVERROR(EAGAIN);
}

static int sctp_read(URLContext *h, uint8_t *buf, int size)
{
    SCTPContext *s = h->priv_data;
    int ret;

    if (!(h->flags & AVIO_FLAG_NONBLOCK)) {
        ret = sctp_wait_fd(s->fd, 0);
        if (ret < 0)
            return ret;
    }

    if (s->max_streams) {
        /*StreamId is introduced as a 2byte code into the stream*/
        struct sctp_sndrcvinfo info = { 0 };
        ret = ff_sctp_recvmsg(s->fd, buf + 2, size - 2, NULL, 0, &info, 0);
        AV_WB16(buf, info.sinfo_stream);
        ret = ret < 0 ? ret : ret + 2;
    } else
        ret = recv(s->fd, buf, size, 0);

    return ret < 0 ? ff_neterrno() : ret;
}

开发者ID:SmartJog，项目名称:ffmpeg，代码行数:32，代码来源:sctp.c

示例3: udp_read

static int udp_read(URLContext *h, uint8_t *buf, int size)
{
    UDPContext *s = h->priv_data;
    struct pollfd p = {s->udp_fd, POLLIN, 0};
    int len;
    int ret;

    for(;;) {
        if (url_interrupt_cb())
            return AVERROR(EINTR);
        ret = poll(&p, 1, 100);
        if (ret < 0) {
            if (ff_neterrno() == FF_NETERROR(EINTR))
                continue;
            return AVERROR(EIO);
        }
        if (!(ret == 1 && p.revents & POLLIN))
            continue;
        len = recv(s->udp_fd, buf, size, 0);
        if (len < 0) {
            if (ff_neterrno() != FF_NETERROR(EAGAIN) &&
                ff_neterrno() != FF_NETERROR(EINTR))
                return AVERROR(EIO);
        } else {
            break;
        }
    }
    return len;
}

开发者ID:DocOnDev，项目名称:mythtv，代码行数:29，代码来源:udp.c

示例4: ff_listen_bind

int ff_listen_bind(int fd, const struct sockaddr *addr,
                   socklen_t addrlen, int timeout, URLContext *h)
{
    int ret;
    int reuse = 1;
    struct pollfd lp = { fd, POLLIN, 0 };
    if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof(reuse))) {
        av_log(NULL, AV_LOG_WARNING, "setsockopt(SO_REUSEADDR) failed\n");
    }
    ret = bind(fd, addr, addrlen);
    if (ret)
        return ff_neterrno();

    ret = listen(fd, 1);
    if (ret)
        return ff_neterrno();

    ret = ff_poll_interrupt(&lp, 1, timeout, &h->interrupt_callback);
    if (ret < 0)
        return ret;

    ret = accept(fd, NULL, NULL);
    if (ret < 0)
        return ff_neterrno();

    closesocket(fd);

    ff_socket_nonblock(ret, 1);
    return ret;
}

开发者ID:alex1818，项目名称:FFmpeg，代码行数:30，代码来源:network.c

示例5: udp_read

static int udp_read(URLContext *h, uint8_t *buf, int size)
{
    UDPContext *s = h->priv_data;
    int len;
    fd_set rfds;
    int ret;
    struct timeval tv;

    for(;;) {
        if (url_interrupt_cb())
            return AVERROR(EINTR);
        FD_ZERO(&rfds);
        FD_SET(s->udp_fd, &rfds);
        tv.tv_sec = 0;
        tv.tv_usec = 100 * 1000;
        ret = select(s->udp_fd + 1, &rfds, NULL, NULL, &tv);
        if (ret < 0)
            return AVERROR(EIO);
        if (!(ret > 0 && FD_ISSET(s->udp_fd, &rfds)))
            continue;
        len = recv(s->udp_fd, buf, size, 0);
        if (len < 0) {
            if (ff_neterrno() != FF_NETERROR(EAGAIN) &&
                ff_neterrno() != FF_NETERROR(EINTR))
                return AVERROR(EIO);
        } else {
            break;
        }
    }
    return len;
}

开发者ID:Castlecard，项目名称:plex，代码行数:31，代码来源:udp.c

示例6: udp_read

static int udp_read(URLContext *h, uint8_t *buf, int size)
{
    UDPContext *s = h->priv_data;
#ifndef CONFIG_IPV6
    struct sockaddr_in from;
#else
    struct sockaddr_storage from;
#endif
    socklen_t from_len;
    int len;

    for(;;) {
        from_len = sizeof(from);
        len = recvfrom (s->udp_fd, buf, size, 0,
                        (struct sockaddr *)&from, &from_len);
        if (len < 0) {
            if (ff_neterrno() != FF_NETERROR(EAGAIN) &&
                ff_neterrno() != FF_NETERROR(EINTR))
                return AVERROR(EIO);
        } else {
            break;
        }
    }
    return len;
}

开发者ID:JERUKA9，项目名称:amv-codec-tools，代码行数:25，代码来源:udp.c

示例7: http_send_data

/* send data starting at c->buffer_ptr to the output connection(either UDP or TCP)*/
static int http_send_data(HTTPContext *c)
{
    int len, ret;

    for(;;) {
        if (c->buffer_ptr >= c->buffer_end) {
            ret = c->hls_idx >= 0 ? hls_read(c) : sff_prepare_data(c);
            if (ret < 0)
                return -1;
            else if (ret != 0)
                /* state change requested */
                break;
		} else {
			/* TCP data output */
			len = send(c->fd, c->buffer_ptr, c->buffer_end - c->buffer_ptr, 0);
			if (len < 0) {
				if (ff_neterrno() != AVERROR(EAGAIN) &&
						ff_neterrno() != AVERROR(EINTR))
					/* error : close connection */
					return -1;
				else
					return 0;
			} else
				c->buffer_ptr += len;

			c->data_count += len;
			break;
		}
    } /* for(;;) */
    return 0;
}

开发者ID:mobdim，项目名称:ffmpeg-streaming，代码行数:32，代码来源:ffserver.c

示例8: tcp_write

static int tcp_write(URLContext *h, const uint8_t *buf, int size)
{
    TCPContext *s = h->priv_data;
    int ret, size1, len;
    struct pollfd p = {s->fd, POLLOUT, 0};

    size1 = size;
    while (size > 0) {
        if (url_interrupt_cb())
            return AVERROR(EINTR);
        ret = poll(&p, 1, 100);
        if (ret == 1 && p.revents & POLLOUT) {
            len = send(s->fd, buf, size, 0);
            if (len < 0) {
                if (ff_neterrno() != FF_NETERROR(EINTR) &&
                    ff_neterrno() != FF_NETERROR(EAGAIN))
                    return ff_neterrno();
                continue;
            }
            size -= len;
            buf += len;
        } else if (ret < 0) {
            if (ff_neterrno() == FF_NETERROR(EINTR))
                continue;
            return -1;
        }
    }
    return size1 - size;
}

开发者ID:AWilco，项目名称:xbmc，代码行数:29，代码来源:tcp.c

示例9: tcp_write

static int tcp_write(URLContext *h, uint8_t *buf, int size)
{
    TCPContext *s = h->priv_data;
    int ret, size1, fd_max, len;
    fd_set wfds;
    struct timeval tv;

    size1 = size;
    while (size > 0) {
        if (url_interrupt_cb())
            return AVERROR(EINTR);
        fd_max = s->fd;
        FD_ZERO(&wfds);
        FD_SET(s->fd, &wfds);
        tv.tv_sec = 0;
        tv.tv_usec = 100 * 1000;
        ret = select(fd_max + 1, NULL, &wfds, NULL, &tv);
        if (ret > 0 && FD_ISSET(s->fd, &wfds)) {
            len = send(s->fd, buf, size, 0);
            if (len < 0) {
                if (ff_neterrno() != FF_NETERROR(EINTR) &&
                    ff_neterrno() != FF_NETERROR(EAGAIN))
                    return AVERROR(errno);
                continue;
            }
            size -= len;
            buf += len;
        } else if (ret < 0) {
            return -1;
        }
    }
    return size1 - size;
}

开发者ID:CarlHuff，项目名称:kgui，代码行数:33，代码来源:tcp.c

示例10: FD_ZERO

static void *circular_buffer_task( void *_URLContext)
{
    URLContext *h = _URLContext;
    UDPContext *s = h->priv_data;
    fd_set rfds;
    struct timeval tv;

    for(;;) {
        int left;
        int ret;
        int len;

        if (url_interrupt_cb()) {
            s->circular_buffer_error = EINTR;
            return NULL;
        }

        FD_ZERO(&rfds);
        FD_SET(s->udp_fd, &rfds);
        tv.tv_sec = 1;
        tv.tv_usec = 0;
        ret = select(s->udp_fd + 1, &rfds, NULL, NULL, &tv);
        if (ret < 0) {
            if (ff_neterrno() == AVERROR(EINTR))
                continue;
            s->circular_buffer_error = EIO;
            return NULL;
        }

        if (!(ret > 0 && FD_ISSET(s->udp_fd, &rfds)))
            continue;

        /* How much do we have left to the end of the buffer */
        /* Whats the minimum we can read so that we dont comletely fill the buffer */
        left = av_fifo_space(s->fifo);
        left = FFMIN(left, s->fifo->end - s->fifo->wptr);

        /* No Space left, error, what do we do now */
        if( !left) {
            av_log(h, AV_LOG_ERROR, "circular_buffer: OVERRUN\n");
            s->circular_buffer_error = EIO;
            return NULL;
        }

        len = recv(s->udp_fd, s->fifo->wptr, left, 0);
        if (len < 0) {
            if (ff_neterrno() != AVERROR(EAGAIN) && ff_neterrno() != AVERROR(EINTR)) {
                s->circular_buffer_error = EIO;
                return NULL;
            }
        }
        s->fifo->wptr += len;
        if (s->fifo->wptr >= s->fifo->end)
            s->fifo->wptr = s->fifo->buffer;
        s->fifo->wndx += len;
    }

    return NULL;
}

开发者ID:CoreTech-Development，项目名称:amlogic-libplayer，代码行数:59，代码来源:udp.c

示例11: pthread_setcancelstate

static void *circular_buffer_task( void *_URLContext)
{
    URLContext *h = _URLContext;
    UDPContext *s = h->priv_data;
    int old_cancelstate;

    pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &old_cancelstate);
    pthread_mutex_lock(&s->mutex);
    if (ff_socket_nonblock(s->udp_fd, 0) < 0) {
        av_log(h, AV_LOG_ERROR, "Failed to set blocking mode");
        s->circular_buffer_error = AVERROR(EIO);
        goto end;
    }
    while(1) {
        int len;

        pthread_mutex_unlock(&s->mutex);
        /* Blocking operations are always cancellation points;
           see "General Information" / "Thread Cancelation Overview"
           in Single Unix. */
        pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, &old_cancelstate);
        len = recv(s->udp_fd, s->tmp+4, sizeof(s->tmp)-4, 0);
        pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &old_cancelstate);
        pthread_mutex_lock(&s->mutex);
        if (len < 0) {
            if (ff_neterrno() != AVERROR(EAGAIN) && ff_neterrno() != AVERROR(EINTR)) {
                s->circular_buffer_error = ff_neterrno();
                goto end;
            }
            continue;
        }
        AV_WL32(s->tmp, len);

        if(av_fifo_space(s->fifo) < len + 4) {
            /* No Space left */
            if (s->overrun_nonfatal) {
                av_log(h, AV_LOG_WARNING, "Circular buffer overrun. "
                        "Surviving due to overrun_nonfatal option\n");
                continue;
            } else {
                av_log(h, AV_LOG_ERROR, "Circular buffer overrun. "
                        "To avoid, increase fifo_size URL option. "
                        "To survive in such case, use overrun_nonfatal option\n");
                s->circular_buffer_error = AVERROR(EIO);
                goto end;
            }
        }
        av_fifo_generic_write(s->fifo, s->tmp, len+4, NULL);
        pthread_cond_signal(&s->cond);
    }

end:
    pthread_cond_signal(&s->cond);
    pthread_mutex_unlock(&s->mutex);
    return NULL;
}

开发者ID:VFR-maniac，项目名称:ffmpeg，代码行数:56，代码来源:udp.c

示例12: rtp_read

static int rtp_read(URLContext *h, uint8_t *buf, int size)
{
    RTPContext *s = h->priv_data;
    struct sockaddr_storage from;
    socklen_t from_len;
    int len, n;
    struct pollfd p[2] = {{s->rtp_fd, POLLIN, 0}, {s->rtcp_fd, POLLIN, 0}};

    for(;;) {
        if (ff_check_interrupt(&h->interrupt_callback))
            return AVERROR_EXIT;
        /* build fdset to listen to RTP and RTCP packets */
        n = poll(p, 2, 100);
        if (n > 0) {
            /* first try RTCP */
            if (p[1].revents & POLLIN) {
                from_len = sizeof(from);
                len = recvfrom (s->rtcp_fd, buf, size, 0,
                                (struct sockaddr *)&from, &from_len);
                if (len < 0) {
                    if (ff_neterrno() == AVERROR(EAGAIN) ||
                        ff_neterrno() == AVERROR(EINTR))
                        continue;
                    return AVERROR(EIO);
                }
                if (rtp_check_source_lists(s, &from))
                    continue;
                break;
            }
            /* then RTP */
            if (p[0].revents & POLLIN) {
                from_len = sizeof(from);
                len = recvfrom (s->rtp_fd, buf, size, 0,
                                (struct sockaddr *)&from, &from_len);
                if (len < 0) {
                    if (ff_neterrno() == AVERROR(EAGAIN) ||
                        ff_neterrno() == AVERROR(EINTR))
                        continue;
                    return AVERROR(EIO);
                }
                if (rtp_check_source_lists(s, &from))
                    continue;
                break;
            }
        } else if (n < 0) {
            if (ff_neterrno() == AVERROR(EINTR))
                continue;
            return AVERROR(EIO);
        }
    }
    return len;
}

开发者ID:YesVideo，项目名称:FFmpeg，代码行数:52，代码来源:rtpproto.c

示例13: sctp_write

static int sctp_write(URLContext *h, const uint8_t *buf, int size)
{
    SCTPContext *s = h->priv_data;
    int ret;

    if (!(h->flags & AVIO_FLAG_NONBLOCK)) {
        ret = sctp_wait_fd(s->fd, 1);
        if (ret < 0)
            return ret;
    }

    if (s->max_streams) {
        /*StreamId is introduced as a 2byte code into the stream*/
        struct sctp_sndrcvinfo info = { 0 };
        info.sinfo_stream           = AV_RB16(buf);
        if (info.sinfo_stream > s->max_streams) {
            av_log(h, AV_LOG_ERROR, "bad input data\n");
            return AVERROR(EINVAL);
        }
        ret = ff_sctp_send(s->fd, buf + 2, size - 2, &info, MSG_EOR);
    } else
        ret = send(s->fd, buf, size, 0);

    return ret < 0 ? ff_neterrno() : ret;
}

开发者ID:Bjelijah，项目名称:EcamTurnH265，代码行数:25，代码来源:sctp.c

示例14: ff_network_wait_fd

int ff_network_wait_fd(int fd, int write)
{
    int ev = write ? POLLOUT : POLLIN;
    struct pollfd p = { .fd = fd, .events = ev, .revents = 0 };
    int ret;
    ret = poll(&p, 1, 100);
    return ret < 0 ? ff_neterrno() : p.revents & (ev | POLLERR | POLLHUP) ? 0 : AVERROR(EAGAIN);
}

int ff_network_wait_fd_timeout(int fd, int write, int64_t timeout, AVIOInterruptCB *int_cb)
{
    int ret;
    int64_t wait_start = 0;

    while (1) {
        ret = ff_network_wait_fd(fd, write);
        if (ret != AVERROR(EAGAIN))
            return ret;
        if (ff_check_interrupt(int_cb))
            return AVERROR_EXIT;
        if (timeout) {
            if (!wait_start)
                wait_start = av_gettime();
            else if (av_gettime() - wait_start > timeout)
                return AVERROR(ETIMEDOUT);
        }
    }
}

开发者ID:aronlu，项目名称:FFmpeg，代码行数:28，代码来源:network.c

示例15: ff_network_wait_fd

int ff_network_wait_fd(int fd, int write)
{
    int ev = write ? POLLOUT : POLLIN;
    struct pollfd p = { .fd = fd, .events = ev, .revents = 0 };
    int ret;
    ret = poll(&p, 1, 100);
    return ret < 0 ? ff_neterrno() : p.revents & (ev | POLLERR | POLLHUP) ? 0 : AVERROR(EAGAIN);
}
#endif

void ff_network_close(void)
{
#if HAVE_WINSOCK2_H
    WSACleanup();
#endif
}

#if HAVE_WINSOCK2_H
int ff_neterrno(void)
{
    int err = WSAGetLastError();
    switch (err) {
    case WSAEWOULDBLOCK:
        return AVERROR(EAGAIN);
    case WSAEINTR:
        return AVERROR(EINTR);
    }
    return -err;
}

开发者ID:Gamer125，项目名称:wiibrowser，代码行数:29，代码来源:network.c

示例16: udp_read

static int udp_read(URLContext *h, uint8_t *buf, int size)
{
    UDPContext *s = h->priv_data;
    int ret;
#if HAVE_PTHREAD_CANCEL
    int avail, nonblock = h->flags & AVIO_FLAG_NONBLOCK;

    if (s->fifo) {
        pthread_mutex_lock(&s->mutex);
        do {
            avail = av_fifo_size(s->fifo);
            if (avail) { // >=size) {
                uint8_t tmp[4];

                av_fifo_generic_read(s->fifo, tmp, 4, NULL);
                avail= AV_RL32(tmp);
                if(avail > size) {
                    av_log(h, AV_LOG_WARNING, "Part of datagram lost due to insufficient buffer size\n");
                    avail= size;
                }

                av_fifo_generic_read(s->fifo, buf, avail, NULL);
                av_fifo_drain(s->fifo, AV_RL32(tmp) - avail);
                pthread_mutex_unlock(&s->mutex);
                return avail;
            } else if(s->circular_buffer_error) {
                int err = s->circular_buffer_error;
                pthread_mutex_unlock(&s->mutex);
                return err;
            } else if(nonblock) {
                pthread_mutex_unlock(&s->mutex);
                return AVERROR(EAGAIN);
            }
            else {
                /* FIXME: using the monotonic clock would be better,
                   but it does not exist on all supported platforms. */
                int64_t t = av_gettime() + 100000;
                struct timespec tv = { .tv_sec  =  t / 1000000,
                           .tv_nsec = (t % 1000000) * 1000
                };
                if (pthread_cond_timedwait(&s->cond, &s->mutex, &tv) < 0) {
                    pthread_mutex_unlock(&s->mutex);
                    return AVERROR(errno == ETIMEDOUT ? EAGAIN : errno);
                }
                nonblock = 1;
            }
        } while( 1);
    }
#endif

    if (!(h->flags & AVIO_FLAG_NONBLOCK)) {
        ret = ff_network_wait_fd(s->udp_fd, 0);
        if (ret < 0)
            return ret;
    }
    ret = recv(s->udp_fd, buf, size, 0);

    return ret < 0 ? ff_neterrno() : ret;
}

开发者ID:xyzmst，项目名称:ffmpeg2.6-android，代码行数:59，代码来源:udp.c

示例17: ff_listen_connect

int ff_listen_connect(int fd, const struct sockaddr *addr,
                      socklen_t addrlen, int timeout, URLContext *h,
                      int will_try_next)
{
    struct pollfd p = {fd, POLLOUT, 0};
    int ret;
    socklen_t optlen;

    if (ff_socket_nonblock(fd, 1) < 0)
        av_log(NULL, AV_LOG_DEBUG, "ff_socket_nonblock failed\n");

    while ((ret = connect(fd, addr, addrlen))) {
        ret = ff_neterrno();
        switch (ret) {
        case AVERROR(EINTR):
            if (ff_check_interrupt(&h->interrupt_callback))
                return AVERROR_EXIT;
            continue;
        case AVERROR(EINPROGRESS):
        case AVERROR(EAGAIN):
            ret = ff_poll_interrupt(&p, 1, timeout, &h->interrupt_callback);
            if (ret < 0)
                return ret;
            optlen = sizeof(ret);
            if (getsockopt (fd, SOL_SOCKET, SO_ERROR, &ret, &optlen))
                ret = AVUNERROR(ff_neterrno());
            if (ret != 0) {
                char errbuf[100];
                ret = AVERROR(ret);
                av_strerror(ret, errbuf, sizeof(errbuf));
                if (will_try_next)
                    av_log(h, AV_LOG_WARNING,
                           "Connection to %s failed (%s), trying next address\n",
                           h->filename, errbuf);
                else
                    av_log(h, AV_LOG_ERROR, "Connection to %s failed: %s\n",
                           h->filename, errbuf);
            }
        default:
            return ret;
        }
    }
    return ret;
}

开发者ID:kithan，项目名称:ffmpeg2.6-android，代码行数:44，代码来源:network.c

示例18: udp_write

static int udp_write(URLContext *h, uint8_t *buf, int size)
{
    UDPContext *s = h->priv_data;
    int ret;

    for(;;) {
        ret = sendto (s->udp_fd, buf, size, 0,
                      (struct sockaddr *) &s->dest_addr,
                      s->dest_addr_len);
        if (ret < 0) {
            if (ff_neterrno() != FF_NETERROR(EINTR) &&
                ff_neterrno() != FF_NETERROR(EAGAIN))
                return AVERROR(EIO);
        } else {
            break;
        }
    }
    return size;
}

开发者ID:Castlecard，项目名称:plex，代码行数:19，代码来源:udp.c

示例19: rtp_read

static int rtp_read(URLContext *h, uint8_t *buf, int size)
{
    RTPContext *s = h->priv_data;
    int len, n, i;
    struct pollfd p[2] = {{s->rtp_fd, POLLIN, 0}, {s->rtcp_fd, POLLIN, 0}};
    int poll_delay = h->flags & AVIO_FLAG_NONBLOCK ? 0 : 100;
    struct sockaddr_storage *addrs[2] = { &s->last_rtp_source, &s->last_rtcp_source };
    socklen_t *addr_lens[2] = { &s->last_rtp_source_len, &s->last_rtcp_source_len };

    for(;;) {
        if (ff_check_interrupt(&h->interrupt_callback))
            return AVERROR_EXIT;
        n = poll(p, 2, poll_delay);
        if (n > 0) {
            /* first try RTCP, then RTP */
            for (i = 1; i >= 0; i--) {
                if (!(p[i].revents & POLLIN))
                    continue;
                *addr_lens[i] = sizeof(*addrs[i]);
                len = recvfrom(p[i].fd, buf, size, 0,
                                (struct sockaddr *)addrs[i], addr_lens[i]);
                if (len < 0) {
                    if (ff_neterrno() == AVERROR(EAGAIN) ||
                        ff_neterrno() == AVERROR(EINTR))
                        continue;
                    return AVERROR(EIO);
                }
                if (rtp_check_source_lists(s, addrs[i]))
                    continue;
                return len;
            }
        } else if (n < 0) {
            if (ff_neterrno() == AVERROR(EINTR))
                continue;
            return AVERROR(EIO);
        }
        if (h->flags & AVIO_FLAG_NONBLOCK)
            return AVERROR(EAGAIN);
    }
    return len;
}

开发者ID:markjreed，项目名称:vice-emu，代码行数:41，代码来源:rtpproto.c

示例20: tcp_read

static int tcp_read(URLContext *h, uint8_t *buf, int size)
{
    TCPContext *s = h->priv_data;
    int len, fd_max, ret;
    fd_set rfds;
    struct timeval tv;    
    int tout_cnt=100; //tout_cnt*time_out=10s        
    for (;;) {        
        if (url_interrupt_cb())       
            return AVERROR(EINTR);       
        fd_max = s->fd;
        FD_ZERO(&rfds);
        FD_SET(s->fd, &rfds);
        tv.tv_sec = 0;
        tv.tv_usec = 300 * 1000;       
        ret = select(fd_max + 1, &rfds, NULL, NULL, &tv);          
        if (ret > 0 && FD_ISSET(s->fd, &rfds)) {            
            len = recv(s->fd, buf, size, 0);              
            if (len < 0) {
                av_log(NULL,AV_LOG_INFO,"tcp_read recv failed: len= %d\n",len);
                if (ff_neterrno() != FF_NETERROR(EINTR) &&
                    ff_neterrno() != FF_NETERROR(EAGAIN))                
                    return AVERROR(ff_neterrno());                
            } else return len;            
        } else if (ret < 0) {  
            av_log(NULL,AV_LOG_INFO,"tcp_read select failed: ret= %d\n",ret);
            return -1;
        }
        else if(ret == 0){
            tout_cnt --;        
			av_log(NULL,AV_LOG_INFO, "tcp_read(%d): read timeout,try again\n",tout_cnt);
            if(tout_cnt == 0)
            {               
                
                return AVERROR(EAGAIN);
            }
        }        
    }
}

开发者ID:Pivosgroup，项目名称:aml-original-linux-buildroot，代码行数:39，代码来源:tcp.c

注：本文中的ff_neterrno函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ff_start_tag函数代码示例发布时间：2022-05-30

C++ fexists函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19234|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9668|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ ff_neterrno函数代码示例

示例1: tcp_read

示例2: sctp_wait_fd

示例3: udp_read

示例4: ff_listen_bind

示例5: udp_read

示例6: udp_read

示例7: http_send_data

示例8: tcp_write

示例9: tcp_write

示例10: FD_ZERO

示例11: pthread_setcancelstate

示例12: rtp_read

示例13: sctp_write

示例14: ff_network_wait_fd

示例15: ff_network_wait_fd

示例16: udp_read

示例17: ff_listen_connect

示例18: udp_write

示例19: rtp_read

示例20: tcp_read

请发表评论

全部评论

上一篇：

下一篇：

Delphi 日志记录和查看

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053