C++ errh_Info函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中errh_Info函数的典型用法代码示例。如果您正苦于以下问题：C++ errh_Info函数的具体用法？C++ errh_Info怎么用？C++ errh_Info使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了errh_Info函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: IoCardInit

/*----------------------------------------------------------------------------*\
   Init method for the Pb module Ao
\*----------------------------------------------------------------------------*/
static pwr_tStatus IoCardInit (
  io_tCtx	ctx,
  io_sAgent	*ap,
  io_sRack	*rp,
  io_sCard	*cp
) 
{
  io_sCardLocal *local;
  pwr_sClass_Pb_Ao *op;
  io_sChannel *chanp;
  int i;

  op = (pwr_sClass_Pb_Ao *) cp->op;
  local = (io_sCardLocal *) cp->Local;

  if (rp->Class != pwr_cClass_Pb_DP_Slave) {
    errh_Info( "Illegal object type %s", cp->Name );
    return IO__SUCCESS;
  }

  if (op->Status >= PB_MODULE_STATE_OPERATE) {

    // Calculate polycoeff
    for (i=0; i<cp->ChanListSize; i++) {
      chanp = &cp->chanlist[i];
      if (!chanp->cop) continue;
      io_AoRangeToCoef(chanp);
    }
  }
  else
    errh_Info( "Error initializing Pb module Ao %s", cp->Name );

  return IO__SUCCESS;
}

开发者ID:jordibrus，项目名称:proview，代码行数:37，代码来源:rt_io_m_pb_ao.c

示例2: sancm_Update

void
sancm_Update (
    qcom_sGet		*get
)
{
    gdb_sObject		*op;
    int			i;
    int			error;
    net_sSanUpdate	*up = get->data;

    gdb_AssumeUnlocked;

    gdb_ScopeLock {

        error = 0;
        if (0) errh_Info("sancm_Update, recieved %d", up->count);
        for (i = 0; i < up->count; i++) {
            op = hash_Search(NULL, gdbroot->oid_ht, &up->data[i].sane.oid);
            if (op == NULL || cdh_RefIdIsNotEqual(op->u.c.sanid, up->data[i].sane.sid)) {
                error++;
                continue;
            }

            up->data[i].sane.sid.rix = 0; /* Sid is ok!  */
            vol_UpdateAlarm(NULL, op, up->data[i].al);
        }

        /* Send remove for errors.  */

        if (error > 0) {
            net_sSanRemove	*rp;
            int		size = sizeof(net_sSanRemove) + (error - 1) * sizeof(rp->sid[0]);
            int		i;
            gdb_sNode		*np = hash_Search(NULL, gdbroot->nid_ht, &up->hdr.nid);
            qcom_sQid		tgt;

            tgt.nid = np->nid;
            tgt.qix = net_cProcHandler;

            rp = calloc(1, size);
            if (rp != NULL) {
                rp->count = error;
                for (i = 0; i < up->count; i++) {
                    if (up->data[i].sane.sid.rix == 0) continue;
                    rp->sid[--error] = up->data[i].sane.sid;
                }
                gdb_Unlock;
                errh_Info("sancm_Update, sent removed count %d", rp->count);
                net_Put(NULL, &tgt, rp, net_eMsg_sanRemove, 0, size, 0);
                gdb_Lock;
                free(rp);
            }
        }

    } gdb_ScopeUnlock;

}

开发者ID:Strongc，项目名称:proview，代码行数:57，代码来源:rt_sancm.c

示例3: IoRackInit

static pwr_tStatus IoRackInit( io_tCtx ctx,
			       io_sAgent *ap,
			       io_sRack *rp)
{
  io_sLocalUSB *local;
  int status;
  int i;
  unsigned int snum;
  int found;
  io_sCard *cp;
  pwr_sClass_MotionControl_USB *op = (pwr_sClass_MotionControl_USB *)rp->op;

  local = (io_sLocalUSB *) calloc( 1, sizeof(io_sLocalUSB));
  rp->Local = local;

  for ( i = 0; i < (int)sizeof(local->USB_Handle); i++) {
    status = USBIO_Open( &local->USB_Handle[i]);
    if ( status) {
      if ( i == 0)
	op->Status = status;
      break;
    }

    /* Check is this card is configured */
    status = USBIO_GetSerialNr( &local->USB_Handle[i], &snum);
    if ( !status) {
      found = 0;
      for ( cp = rp->cardlist; cp; cp = cp->next) {
	if ( ((pwr_sClass_MotionControl_USBIO *)cp->op)->Super.Address == snum) {
	  local->snum[i] = snum;
	  found = 1;
	  break;
	}
      }
      if ( !found) {
	errh_Info( "USBIO Serial number %d not configured", snum);
	op->Status = USBIO_Close( &local->USB_Handle[i]);
	i--;
	continue;
      }
    }
    else
      errh_Error( "USBIO Serial number error '%s'", rp->Name);
  }

  errh_Info( "Init of USBIO rack '%s'", rp->Name);

  return IO__SUCCESS;
}

开发者ID:Strongc，项目名称:proview，代码行数:49，代码来源:rt_io_m_motioncontrol_usb.c

示例4: IoCardInit

/*----------------------------------------------------------------------------*\
   Init method for the Pb module Di
\*----------------------------------------------------------------------------*/
static pwr_tStatus IoCardInit (
  io_tCtx	ctx,
  io_sAgent	*ap,
  io_sRack	*rp,
  io_sCard	*cp
) 
{
  io_sCardLocal *local;
  pwr_sClass_Pb_Di *op;

  op = (pwr_sClass_Pb_Di *) cp->op;
  local = (io_sCardLocal *) cp->Local;

  // Check configuration 
  
  if (op->NumberOfChannels != 8 && op->NumberOfChannels != 16 && op->NumberOfChannels != 32)
    op->Status = PB_MODULE_STATE_NOTINIT;
    
  if (op->Orientation > op->NumberOfChannels)
    op->Status = PB_MODULE_STATE_NOTINIT;  

  if (op->Status < PB_MODULE_STATE_OPERATE) errh_Info( "Error initializing Pb module Di %s", cp->Name );

  return IO__SUCCESS;
}

开发者ID:jordibrus，项目名称:proview，代码行数:28，代码来源:rt_io_m_pb_di.c

示例5: exit_hdlr

/****************************************************************************
* Name:		exit_hdlr()
*
* Type		void
*
* Type		Parameter	IOGF	Description
*
* Description:
*		Called at exit
*
**************************************************************************/
void			exit_hdlr()
{

	gdh_DLUnrefObjectInfoAll();
	errh_Info("Exiting\n");
	return;
}

开发者ID:hfuhuang，项目名称:proview，代码行数:18，代码来源:rs_remote_logg.c

示例6: init_nodes

static pwr_tStatus
init_nodes ()
{
  pwr_tStatus sts;
  LstLink(sNode) *nl;
  sNode *np;
  pwr_tObjid oid;

  nl = LstEnd(&node_l);

  for (
    sts = gdh_GetClassList(pwr_cClass_NodeLinkSup, &oid);
    ODD(sts);
    sts = gdh_GetNextObject(oid, &oid)
  ) {
    np = init_node(oid, NULL, 1);
    if (np != NULL) {
      nl = LstIns(nl, np, node_l);
    }
  }

  if (LstEmp(&node_l))
    errh_Info("No NodeLink objects");

  return(sts);
}

开发者ID:jordibrus，项目名称:proview，代码行数:26，代码来源:rt_linksup.c

示例7: IoAgentInit

static pwr_tStatus IoAgentInit( io_tCtx ctx,
				io_sAgent *ap)
{
  io_sLocalUSB_Agent *local;
  int sts;
  pwr_sClass_USB_Agent *op = (pwr_sClass_USB_Agent *)ap->op;

  local = (io_sLocalUSB_Agent *) calloc( 1, sizeof(io_sLocalUSB_Agent));
  ap->Local = local;

  sts = libusb_init( &local->libusb_ctx);
  if ( sts != 0) {
    if ( sts == io_cLibDummy)
      op->Status = IO__DUMMYBUILD;
    else
      op->Status = IO__INITFAIL;
    errh_Error( "Init of USB agent failed '%s', error status %d", ap->Name, sts);

    local->libusb_ctx = 0;
    return op->Status;
  }
  else {
    op->Status = IO__SUCCESS;
    errh_Info( "Init of USBIO agent '%s'", ap->Name);
  }

  return IO__SUCCESS;
}

开发者ID:ManfredHerrmann，项目名称:proview，代码行数:28，代码来源:rt_io_m_usb_agent.c

示例8: proc_Start

pwr_tStatus
proc_Start (
  proc_sProcess *p
)
{
  pwr_tStatus sts = PROC__SUCCESS;
  char **argv;

  p->pid = fork();
  if (p->pid) {
    if (p->pid == -1) {
      errh_Error("Could not start %s, %m\nfile: %s", p->name, errno_GetStatus(), p->file);	
    } else {
      errh_Info("Started %s, prio: %d, pid: %d\nfile: %s", p->name, p->p_prio, (int)p->pid, p->file);	
    }
  } else {
    sts = proc_SetPriority(p->p_prio);
    if (EVEN(sts)) errh_Warning("%s: error setprio, %m\nfile: %s", p->name, sts, p->file);
    argv = co_StrToArgv(p->file, p->arg);
    execvp(p->file, argv);
    errh_Error("%s: error execvp, %m\nfile: %s", p->name, errno_GetStatus(), p->file);
    exit(EXIT_FAILURE);
  }

  return sts;
}

开发者ID:ManfredHerrmann，项目名称:proview，代码行数:26，代码来源:rt_proc.c

示例9: IoCardInit

static pwr_tStatus IoCardInit (
  io_tCtx	ctx,
  io_sAgent	*ap,
  io_sRack	*rp,
  io_sCard	*cp  
) 
{
  pwr_sClass_Ai_AI32uP	*op;
  io_sLocal 		*local;
  int			i;
  io_sChannel		*chanp;

  op = (pwr_sClass_Ai_AI32uP *) cp->op;
  local = calloc( 1, sizeof(*local));
  cp->Local = local;
  local->Address = op->RegAddress;
  local->Qbus_fp = ((io_sRackLocal *)(rp->Local))->Qbus_fp;

  errh_Info( "Init of ai card '%s'", cp->Name);

  /* Caluclate polycoeff */
  chanp = cp->chanlist;
  for  ( i = 0; i < cp->ChanListSize; i++)
  {
    AiRangeToCoef( chanp);
    chanp++;
  }

  return 1;
}

开发者ID:hfuhuang，项目名称:proview，代码行数:30，代码来源:rt_io_m_ai_ai32up.c

示例10: cacheTrim

static void
cacheTrim (
  sTimer	*tp
)
{
  static time_tClock	cycle;
  static pwr_tBoolean   first = 1;

  if (first) {
#ifdef OS_LINUX
    cycle = 1 * sysconf(_SC_CLK_TCK);
#else
    cycle = 1 * CLK_TCK;
#endif
    setInterval(&cycle, gdbroot->db->cache_trim_int);
    first = 0;
  }

  if (gdbroot->db->log.b.tmon)
    errh_Info("cacheTrim: %u", tp->clock);

  cvolcm_TrimOld();
  cvol_Qtrim(&gdbroot->db->cacheNew);

  setTimer(tp, cycle);

  insertTimer(tp);
}

开发者ID:Strongc，项目名称:proview，代码行数:28，代码来源:rt_tmon.c

示例11: subbCheck

static void
subbCheck (
  sTimer	*tp
)
{
  sub_sBuffer	*bp = (sub_sBuffer *)tp->data;

  if (gdbroot->db->log.b.tmon)
    errh_Info("subbCheck: %u", tp->clock);

#if 0
  if (EXCL_ON) {
    /* Exclusive mode is on, requeue the
       buffer for later transmission */

    addTime(nowTime(&tp->time), msToTime(NULL, bp->dt)); 
    insertTimer(tp);
  }
#endif

  if (subsm_SendBuffer(bp)) {
    setTimer(tp, msToClock(NULL, bp->dt));
    insertTimer(tp);
  } else {
    freeTimer(tp);
  }
}

开发者ID:Strongc，项目名称:proview，代码行数:27，代码来源:rt_tmon.c

示例12: IoCardInit

static pwr_tStatus IoCardInit (
  io_tCtx	ctx,
  io_sAgent	*ap,
  io_sRack	*rp,
  io_sCard	*cp  
) 
{
  pwr_sClass_Ssab_BaseDiCard	*op;
  io_sLocal 		*local;
  int			i, j;

  op = (pwr_sClass_Ssab_BaseDiCard *) cp->op;
  local = calloc( 1, sizeof(*local));
  cp->Local = local;

  errh_Info( "Init of di card '%s'", cp->Name);

  local->Address[0] = op->RegAddress;
  local->Address[1] = op->RegAddress + 2;
  local->Qbus_fp = ((io_sRackLocal *)(rp->Local))->Qbus_fp;

  /* Init filter */
  for ( i = 0; i < 2; i++)
  {
    /* The filter handles one 16-bit word */
    for ( j = 0; j < 16; j++)
      local->Filter[i].sop[j] = cp->chanlist[i*16+j].sop;
    io_InitDiFilter( local->Filter[i].sop, &local->Filter[i].Found,
		local->Filter[i].Data, ctx->ScanTime);
  }

  return 1;
}

开发者ID:Strongc，项目名称:proview，代码行数:33，代码来源:rt_io_m_ssab_di.c

示例13: IoCardInit

static pwr_tStatus IoCardInit(
    io_tCtx ctx, io_sAgent* ap, io_sRack* rp, io_sCard* cp)
{
  pwr_sClass_Ssab_BaseDoCard* op;
  io_sLocal* local;
  int i, j;

  op = (pwr_sClass_Ssab_BaseDoCard*)cp->op;
  local = calloc(1, sizeof(*local));
  cp->Local = local;

  errh_Info("Init of do card '%s'", cp->Name);

  local->Address[0] = op->RegAddress;
  local->Address[1] = op->RegAddress + 2;
  local->Qbus_fp = ((io_sRackLocal*)(rp->Local))->Qbus_fp;
  local->FirstScan = 1;

  /* Init filter for Po signals */
  for (i = 0; i < 2; i++) {
    /* The filter handles one 16-bit word */
    for (j = 0; j < 16; j++) {
      if (cp->chanlist[i * 16 + j].SigClass == pwr_cClass_Po)
        local->Filter[i].sop[j] = cp->chanlist[i * 16 + j].sop;
    }
    io_InitPoFilter(local->Filter[i].sop, &local->Filter[i].Found,
        local->Filter[i].Data, ctx->ScanTime);
  }

  local->ErrReset = 1.0 / ctx->ScanTime + 0.5;
  if (local->ErrReset < 2)
    local->ErrReset = 2;

  return 1;
}

开发者ID:siamect，项目名称:proview，代码行数:35，代码来源:rt_io_m_ssab_do.c

示例14: IoCardInit

/*----------------------------------------------------------------------------*\
   Init method for the Pb module
\*----------------------------------------------------------------------------*/
static pwr_tStatus IoCardInit(
    io_tCtx ctx, io_sAgent* ap, io_sRack* rp, io_sCard* cp)
{
  io_sFDLCardLocal* local;
  pwr_sClass_Pb_FDL_DataTransfer* op = (pwr_sClass_Pb_FDL_DataTransfer*)cp->op;
  unsigned int input_area_offset = 0;
  unsigned int input_area_chansize = 0;
  unsigned int output_area_offset = 0;
  unsigned int output_area_chansize = 0;

  local = (io_sFDLCardLocal*)calloc(1, sizeof(io_sFDLCardLocal));
  cp->Local = local;

  /* Initialize remote address structure */

  local->byte_ordering = ((pwr_sClass_Pb_FDL_SAP*)rp->op)->ByteOrdering;

  io_bus_card_init(ctx, cp, &input_area_offset, &input_area_chansize,
      &output_area_offset, &output_area_chansize, local->byte_ordering,
      io_eAlignment_Packed);

  local->input_area_size = input_area_offset + input_area_chansize;
  local->output_area_size = output_area_offset + output_area_chansize;

  if (local->input_area_size > 0)
    local->input_area = calloc(1, local->input_area_size);
  if (local->output_area_size > 0)
    local->output_area = calloc(1, local->output_area_size);

  errh_Info("Init of Profibus FDL Data transfer '%s'", cp->Name);

  op->Status = PB__NORMAL;

  return IO__SUCCESS;
}

开发者ID:siamect，项目名称:proview，代码行数:38，代码来源:rt_io_m_pb_fdl_datatransfer.c

示例15: IoCardClose

/*----------------------------------------------------------------------------*\
  
\*----------------------------------------------------------------------------*/
static pwr_tStatus IoCardClose (
  io_tCtx	ctx,
  io_sAgent	*ap,
  io_sRack	*rp,
  io_sCard	*cp  
) 
{
  io_sLocal 		*local;
  int			i;
  pwr_sClass_Di_DIX2	*op = (pwr_sClass_Di_DIX2 *) cp->op;
  int 			words = op->MaxNoOfChannels <= 16 ? 1 : 2;

  local = (io_sLocal *) cp->Local;

  errh_Info( "IO closing di card '%s'", cp->Name);

  /* Free filter data */
  for ( i = 0; i < words; i++)
  {
    if ( local->Filter[i].Found)
      io_CloseDiFilter( local->Filter[i].Data);
  }
  free( (char *) local);

  return 1;
}

开发者ID:Strongc，项目名称:proview，代码行数:29，代码来源:rt_io_m_di_dix2.c

示例16: ini_ProcWait

void
ini_ProcWait (
  pwr_tStatus	*status,
  ini_sContext	*cp
)
{
  lst_sEntry	*pl;
  ini_sProc	*pp;
  pid_t		pid;
  pid_t		last_pid = 1;
  qcom_sGet get;
  int tmo = 1000;

  pwr_dStatus(sts, status, INI__SUCCESS);

#if defined OS_LYNX || defined OS_LINUX
  for (;;) {
    int status;

    get.data = NULL;
    qcom_Get(sts, &cp->eventQ, &get, tmo);
    if (*sts == QCOM__TMO || *sts == QCOM__QEMPTY) {
      errh_Info("Timeout");
    } else if (get.data == NULL) {
      errh_Info("Nulldata");
    } else {
      errh_Info("%d %s", get.size, get.data);
      qcom_Free(NULL, get.data);
    }
    if (lst_Succ(NULL, &cp->proc_lh, &pl) == NULL) break;
    pid = waitpid(-1, &status, WNOHANG|WUNTRACED);
    if (pid == 0) continue;
    if (pid == last_pid) break;
    
    for (pp = lst_Succ(NULL, &cp->proc_lh, &pl); pp != NULL; pp = lst_Succ(NULL, pl, &pl)) {
      if (pp->proc.pid == pid) {
	errh_Info("Process %s exited with status %d", pp->proc.name, status);
	break;
      }
    }
  }
#else
  sleep(100000);
#endif
  errh_Info("Ich sterbe!!");
}

开发者ID:hfuhuang，项目名称:proview，代码行数:46，代码来源:ini.c

示例17: IoAgentInit

static pwr_tStatus IoAgentInit (
  io_tCtx	ctx,
  io_sAgent	*ap
) 
{

  errh_Info( "Init of IO agent %s", ap->Name );

  return 1;
}

开发者ID:ManfredHerrmann，项目名称:proview，代码行数:10，代码来源:rt_io_m_node.c

示例18: csup_Init

/*_*
  @aref cyclesup CycleSup
  */
lst_sEntry *
csup_Init (
    pwr_tStatus	*status,
    pwr_tObjid	tid,
    float		scanTime
)
{
    lst_sEntry	*lh;
    pwr_tObjid	cid;
    pwr_tObjid	pid;
    csup_sObject	*cp;
    int		tv_sec;
    pwr_tFloat32	max_delay;

    pwr_dStatus(sts, status, CSUP__SUCCESS);

    lh = calloc(1, sizeof(*lh));
    if (lh == NULL)
        pwr_Return(NULL, sts, CSUP__INSVIRMEM);

    lst_Init(NULL, lh, NULL);

    for (
        *sts = gdh_GetClassList(pwr_cClass_CycleSup, &cid);
        ODD(*sts);
        *sts = gdh_GetNextObject(cid, &cid)
    ) {
        cp = calloc(1, sizeof(*cp));
        cp->aref.Objid = cid;
        *sts = gdh_DLRefObjectInfoAttrref(&cp->aref, (void**)&cp->o, &cp->dlid);
        if (EVEN(*sts))
            goto error;

        if ( ODD(gdh_GetParent( cid, &pid)) && cdh_ObjidIsEqual( pid, tid))
            cp->is_owner = 1;

        lst_InsertSucc(NULL, lh, &cp->le, cp);
        max_delay = cp->o->MaxDelay;
        cp->o->DelayLimit.tv_sec = tv_sec = (int)max_delay;
        cp->o->DelayLimit.tv_nsec = (int)((max_delay - (float)tv_sec + FLT_EPSILON) * 1.0e9);
        // printf("maxdelay: %f, tv_sec: %d, tv_nsec: %d\n", cp->o->MaxDelay, cp->o->DelayLimit.tv_sec, cp->o->DelayLimit.tv_nsec);
        errh_Info("maxdelay: %f, tv_sec: %d, tv_nsec: %d", cp->o->MaxDelay,
                  cp->o->DelayLimit.tv_sec, cp->o->DelayLimit.tv_nsec);
    }

    if (lst_IsEmpty(NULL, lh))
        goto error;

    return lh;

error:
    csup_Exit(NULL, lh);
    return NULL;
}

开发者ID:jordibrus，项目名称:proview，代码行数:57，代码来源:rt_csup.c

示例19: IoCardInit

/*----------------------------------------------------------------------------*\
   Init method for the Pb module Ai
\*----------------------------------------------------------------------------*/
static pwr_tStatus IoCardInit (
  io_tCtx	ctx,
  io_sAgent	*ap,
  io_sRack	*rp,
  io_sCard	*cp
) 
{
  io_sCardLocal *local;
  pwr_sClass_Pb_Ai *op;
  int i;
  io_sChannel *chanp;
  pwr_sClass_Pb_DP_Slave *slave;

  op = (pwr_sClass_Pb_Ai *) cp->op;
  local = (io_sCardLocal *) cp->Local;

  local->byte_swap = 0;

  if (rp->Class == pwr_cClass_Pb_DP_Slave) {
    slave = (pwr_sClass_Pb_DP_Slave *) rp->op;

    /* Little endian, no problem */
    if (slave->ByteOrdering == 0) local->byte_swap = 0;

    /* Big endian, digitala moduler byteorienterade => swappa */
    if (slave->ByteOrdering == 1) local->byte_swap = 1;

    /* Big endian, digitala moduler wordorienterade => swappa */
    if (slave->ByteOrdering == 2) local->byte_swap = 1;
  }
  else {
    /* Old style */
    if (rp->Class == pwr_cClass_Pb_ET200M) local->byte_swap = 1;
    if (rp->Class == pwr_cClass_Pb_NPBA12) local->byte_swap = 1;
    if (rp->Class == pwr_cClass_Pb_Euro2500) local->byte_swap = 1;
  }

  if (op->Status >= 1) {
//    errh_Info( "Init of Pb module Ai %s", cp->Name );
    for (i=0; i<IO_MAXCHAN; i++) {
      local->scancount[i] = 0;
    }
    // Calculate polycoeff
    for (i=0; i<cp->ChanListSize; i++) {
      chanp = &cp->chanlist[i];
      if (!chanp->cop) continue;
      io_AiRangeToCoef(chanp);
    }
  }
  else
    errh_Info( "Error initializing Pb module Ai %s", cp->Name );

  return 1;
}

开发者ID:hfuhuang，项目名称:proview，代码行数:57，代码来源:rt_io_m_pb_ai.c

示例20: errh_Info

JNIEXPORT void JNICALL Java_jpwr_rt_Errh_info
  (JNIEnv *env, jobject object, jstring jmsg)
{
  char		*cstr;
  const char 	*msg;

  msg = (*env)->GetStringUTFChars( env, jmsg, 0);
  cstr = (char *)msg;

  errh_Info( cstr);
  (*env)->ReleaseStringUTFChars( env, jmsg, cstr);
}

开发者ID:ManfredHerrmann，项目名称:proview，代码行数:12，代码来源:jpwr_rt_Errh.c

注：本文中的errh_Info函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ errint_函数代码示例发布时间：2022-05-30

C++ errh_Error函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9668|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ errh_Info函数代码示例

示例1: IoCardInit

示例2: sancm_Update

示例3: IoRackInit

示例4: IoCardInit

示例5: exit_hdlr

示例6: init_nodes

示例7: IoAgentInit

示例8: proc_Start

示例9: IoCardInit

示例10: cacheTrim

示例11: subbCheck

示例12: IoCardInit

示例13: IoCardInit

示例14: IoCardInit

示例15: IoCardClose

示例16: ini_ProcWait

示例17: IoAgentInit

示例18: csup_Init

示例19: IoCardInit

示例20: errh_Info

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

TeamWertarbyte/material-ui-search-bar: M

鲁东大学一米网:Win7系统USB驱动器RAM的操

微信小程序构架

CVE-2022-21554

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053