C++ ergodox_board_led_off函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ergodox_board_led_off函数的典型用法代码示例。如果您正苦于以下问题：C++ ergodox_board_led_off函数的具体用法？C++ ergodox_board_led_off怎么用？C++ ergodox_board_led_off使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ergodox_board_led_off函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void)
{
    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
        case FMU:
            ergodox_right_led_1_on();
        break;
        case PMQ:
            ergodox_right_led_2_on();
        break;
        case PMN:
            ergodox_right_led_3_on();
        break;
        default:
            if(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) {
                ergodox_led_all_set(LED_BRIGHTNESS_HI);
                ergodox_right_led_1_on();
            }
            else {
                ergodox_board_led_off();
            }
        break;
    }

};

开发者ID:sriehl，项目名称:qmk_firmware，代码行数:31，代码来源:keymap.c

示例2: matrix_init_user

// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
    ergodox_board_led_off();
    ergodox_right_led_1_on();
    ergodox_right_led_2_on();
    ergodox_right_led_3_on();
    ergodox_board_led_off();
    ergodox_right_led_1_on();
    ergodox_right_led_2_on();
    ergodox_right_led_3_on();
    ergodox_board_led_off();    
};

开发者ID:keihino，项目名称:qmk_firmware，代码行数:12，代码来源:keymap.c

示例3: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {

  uint8_t layer = biton32(layer_state);

  ergodox_board_led_off();
  ergodox_right_led_1_off();
  ergodox_right_led_2_off();
  ergodox_right_led_3_off();
  switch (layer) {
    case 1:
      ergodox_right_led_1_on();
      break;
    case 2:
      ergodox_right_led_2_on();
      break;
#ifdef CFQ_USE_EXPEREMENTAL_LAYER
    case 3:
      ergodox_right_led_3_on();
      break;
#endif
    default:
      // none
      break;
  }

};

开发者ID:ScrelliCopter，项目名称:qmk_firmware，代码行数:27，代码来源:keymap.c

示例4: matrix_scan_keymap

void matrix_scan_keymap(void) {  // runs frequently to update info
  uint8_t modifiders = get_mods();

  if (!skip_leds) {
    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();

    // Since we're not using the LEDs here for layer indication anymore,
    // then lets use them for modifier indicators.  Shame we don't have 4...
    // Also, no "else", since we want to know each, independantly. 
    if (modifiders & MODS_SHIFT_MASK) {
      ergodox_right_led_2_on();
    }
    if (modifiders & MODS_CTRL_MASK) {
      ergodox_right_led_1_on();
    }
    if (modifiders & MODS_ALT_MASK) {
      ergodox_right_led_3_on();
    }

  }

};

开发者ID:Twey，项目名称:qmk_firmware，代码行数:25，代码来源:keymap.c

示例5: dance_flsh_each

void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) {
    if (!skip_leds) {
        ergodox_board_led_off();
        ergodox_right_led_1_off();
        ergodox_right_led_2_off();
        ergodox_right_led_3_off();
        skip_leds = true;
    }
    switch (state->count) {
        case 1:
            ergodox_right_led_1_on();
            break;
        case 2:
            ergodox_right_led_2_on();
            break;
        case 3:
            ergodox_right_led_3_on();
            break;
        case 4:
            ergodox_right_led_1_off();
            _delay_ms(50);
            ergodox_right_led_2_off();
            _delay_ms(50);
            ergodox_right_led_3_off();

    }
}

开发者ID:berfarah，项目名称:qmk_firmware，代码行数:27，代码来源:keymap.c

示例6: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
      // TODO: Make this relevant to the ErgoDox EZ.
        case 1:
            ergodox_right_led_3_on();
            break;
        case 2:
            ergodox_right_led_2_on();
            break;
        case 3:
            ergodox_right_led_2_on();
            ergodox_right_led_3_on();
            break;
        default:
            // none
            break;
    }

    if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
        // if capslk is on, set led 1 on
        ergodox_right_led_1_on();
    } else {
        ergodox_right_led_1_off();
    }

};

开发者ID:0tsuki，项目名称:qmk_firmware，代码行数:34，代码来源:keymap.c

示例7: matrix_scan_user

// Runs constantly in the background, in a loop.
void * matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
    case 1:
      ergodox_right_led_1_on();
      break;
    case 2:
      ergodox_right_led_2_on();
      break;
    case 3:
      ergodox_right_led_3_on();
      break;
    case 4:
      ergodox_right_led_1_on(); // TODO: Make a fourth layer
      ergodox_right_led_3_on();
      break;
    default:
      // none
      break;
    }

};

开发者ID:deadcyclo，项目名称:qmk_firmware，代码行数:29，代码来源:keymap.c

示例8: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
    /* leds is a static array holding the current brightness of each of the
     * three keyboard LEDs. It's 4 long simply to avoid the ugliness of +1s and
     * -1s in the code below, and because wasting a byte really doesn't matter
     * that much (no, it *doesn't*, stop whinging!). Note that because it's
     * static it'll maintain state across invocations of this routine.
     */
    static uint8_t leds[4];
    uint8_t led;
    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();

    /* Loop over each LED/layer */
    for (led = 1; led <= 3; ++led) {
        /* If the current layer matches the current LED, increment its
         * brightness by 1 up to a maximum of 255. If the current layer doesn't
         * match, decrement its brightness by 1 down to a minimum of zero.
         */
        leds[led] += (layer == led) ?
            (leds[led] < 255 ? 1 : 0):
            (leds[led] > 0 ? -1 : 0);
        /* Set LED state according to the new brightness */
        if (leds[led]) {
            ergodox_right_led_on(led);
            ergodox_right_led_set(led, leds[led]);
        }
        else {
            ergodox_right_led_off(led);
        }
    }


};

开发者ID:Depariel，项目名称:qmk_firmware，代码行数:35，代码来源:keymap.c

示例9: matrix_scan_keymap

void matrix_scan_keymap(void) {  // runs frequently to update info
  uint8_t modifiers = get_mods();
  uint8_t led_usb_state = host_keyboard_leds();
  uint8_t one_shot = get_oneshot_mods();

  if (!skip_leds) {
    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();

    // Since we're not using the LEDs here for layer indication anymore,
    // then lets use them for modifier indicators.  Shame we don't have 4...
    // Also, no "else", since we want to know each, independently.
    if ( ( modifiers | one_shot ) & MOD_MASK_SHIFT || led_usb_state & (1<<USB_LED_CAPS_LOCK) ) {
      ergodox_right_led_2_on();
      ergodox_right_led_2_set( 50 );
    }
    if ( ( modifiers | one_shot ) & MOD_MASK_CTRL) {
      ergodox_right_led_1_on();
      ergodox_right_led_1_set( 10 );
    }
    if ( ( modifiers | one_shot ) & MOD_MASK_ALT) {
      ergodox_right_led_3_on();
      ergodox_right_led_3_set( 10 );
    }

  }

};

开发者ID:UnderSampled，项目名称:qmk_firmware，代码行数:30，代码来源:keymap.c

示例10: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
      // TODO: Make this relevant to the ErgoDox EZ.
        case DVORAK:
            ergodox_right_led_1_on();
            break;
        case COLEMAK:
            ergodox_right_led_2_on();
            break;
        case QWERTY:
            ergodox_right_led_3_on();
            break;
        case FN:
            ergodox_led_all_on();
            break;
        default:
            // none
            break;
    }

};

开发者ID:CastellaFactory，项目名称:qmk_firmware，代码行数:29，代码来源:keymap.c

示例11: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
      // TODO: Make this relevant to the ErgoDox EZ.
        case 1:
            ergodox_right_led_1_on();
            break;
        case 2:
            ergodox_right_led_2_on();
            break;
        case 3:
            ergodox_right_led_3_on();
            break;
        case 4:
            ergodox_right_led_1_on();
            ergodox_right_led_2_on();
            break;
        default:
            // none
            break;
    }
};

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:29，代码来源:keymap.c

示例12: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();

    switch (td_led_override) {
    case 1:
        ergodox_right_led_1_on();
        break;
    case 2:
        ergodox_right_led_2_on();
        break;
    default:
        // Layer 1 and 2 are both overlay layers, so they could both be on. This
        // means we can't use the lazy check of checking for the first significant
        // bit.
        if (LAYER_ON(SYMB)) {
            ergodox_right_led_1_on();
        }
        if (LAYER_ON(NUMP)) {
            ergodox_right_led_2_on();
        }
    }
};

开发者ID:Talljoe，项目名称:qmk_firmware，代码行数:26，代码来源:keymap.c

示例13: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
        case 1:
            ergodox_right_led_3_on();
            break;
        case 2:
            ergodox_right_led_2_on();
            break;
        case 3:
            ergodox_right_led_1_on();
            ergodox_right_led_2_on();
            ergodox_right_led_3_on();
            break;
        default:
            // none
            break;
    }
    
    // Turn the caps lock led on
    if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
        ergodox_right_led_1_on();
    }

}

开发者ID:johgh，项目名称:keyboard，代码行数:32，代码来源:keymap.c

示例14: matrix_scan_user

void matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_on();
    ergodox_led_all_on();

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
   //    _delay_ms(45);

    switch (layer)
    {
    case _SYMBOLS:
      ergodox_right_led_1_on();
      break;
    case _MOUSE:
      ergodox_right_led_2_on();
      break;
    case _NUMPAD:
      ergodox_right_led_3_on();
      break;
    case _NAV:
      ergodox_right_led_1_on();
      ergodox_right_led_2_on();
      break;
    case _MACROS:
      //layer unused right now
      break;
    case _FUNCTION:
      //layer unused right nowex
      break;
    case _APPSWITCH:
      ergodox_right_led_2_on();
      ergodox_right_led_3_on();
      break;
    case _ONESHOT:
      ergodox_right_led_1_on();
      ergodox_right_led_2_on();
      ergodox_right_led_3_on();
      break;
    case _TEXTNAV:
      ergodox_right_led_1_on();
      ergodox_right_led_3_on();
      break;
    case _QWERTY_KIDS:
      ergodox_right_led_1_on();
      ergodox_right_led_2_on();
      ergodox_right_led_3_on();
      break;
    case _STREET_FIGHTER:
      ergodox_right_led_2_on();
      ergodox_right_led_3_on();
    default:
      break;
    }
};

开发者ID:Talljoe，项目名称:qmk_firmware，代码行数:59，代码来源:keymap.c

示例15: matrix_init_user

// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
  // AFAICT, we don't have one of these
  ergodox_board_led_off();
#ifdef MOUSEKEY_ENABLE
  // mousekey: A bit faster by default, use accel keys for fine control
  mk_max_speed = 6;
  // Slightly slower mouse wheel speed than the default
  mk_wheel_max_speed = 4;
#endif
}

开发者ID:wez，项目名称:qmk_firmware，代码行数:11，代码来源:keymap.c

示例16: matrix_scan_user

// Runs constantly in the background, in a loop.
void * matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
        case SYMB:
            ergodox_right_led_1_on();
            break;
        case MDIA:
            ergodox_right_led_2_on();
            break;
        default:
            ergodox_board_led_off();
            break;
    }

};

开发者ID:chschmitz，项目名称:qmk_firmware，代码行数:22，代码来源:keymap.c

示例17: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {

  uint8_t layer = biton32(layer_state);

  ergodox_board_led_off();
  ergodox_right_led_1_off();
  ergodox_right_led_2_off();
  ergodox_right_led_3_off();
  switch (layer) {
  case 1:
    ergodox_right_led_1_on();
    /* ergodox_left_led_1_on(); */
    break;
  case 2:
    ergodox_right_led_2_on();
    /* ergodox_left_led_2_on(); */
    break;
  case 3:
    ergodox_right_led_3_on();
    /* ergodox_left_led_3_on(); */
    break;
  case 4:
    ergodox_right_led_1_on();
    ergodox_right_led_2_on();
    /* ergodox_left_led_1_on(); */
    /* ergodox_left_led_2_on(); */
    break;
  case 5:
    ergodox_right_led_1_on();
    ergodox_right_led_3_on();
    /* ergodox_left_led_1_on(); */
    /* ergodox_left_led_3_on(); */
    break;
  case 6:
    ergodox_right_led_2_on();
    ergodox_right_led_3_on();
    /* ergodox_left_led_2_on(); */
    /* ergodox_left_led_3_on(); */
    break;
  case 7:
    ergodox_right_led_1_on();
    ergodox_right_led_2_on();
    ergodox_right_led_3_on();
    /* ergodox_left_led_1_on(); */
    /* ergodox_left_led_2_on(); */
    /* ergodox_left_led_3_on(); */
    break;
  default:
    break;
  }

};

开发者ID:styts，项目名称:dotfiles，代码行数:53，代码来源:keymap.c

示例18: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    ergodox_right_led_3_off();
    switch (layer) {
        case L1:
            ergodox_right_led_1_on();
            break;
        case L2:
            ergodox_right_led_2_on();
            break;
        case L3:
            ergodox_right_led_3_on();
            break;
        case L4:
            ergodox_right_led_1_on();
            ergodox_right_led_2_on();
            break;
        case L5:
            ergodox_right_led_1_on();
            ergodox_right_led_3_on();
            break;
        // case L6:
        //     ergodox_right_led_2_on();
        //     ergodox_right_led_3_on();
        //     break;
        // case L7:
        //     ergodox_right_led_1_on();
        //     ergodox_right_led_2_on();
        //     ergodox_right_led_3_on();
        //     break;
        default:
            ergodox_board_led_off();
            break;
    }
};

开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:40，代码来源:keymap.c

示例19: matrix_scan_user

// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {

    uint8_t layer = biton32(layer_state);

    ergodox_board_led_off();
    ergodox_right_led_1_off();
    ergodox_right_led_2_off();
    switch (layer) {
        case 1:
            ergodox_right_led_1_on();
            break;
        case 2:
            ergodox_right_led_2_on();
            break;
        default:
            // none
            break;
		   }
};

开发者ID:robotmaxtron，项目名称:qmk_firmware，代码行数:20，代码来源:keymap.c

示例20: matrix_scan_user

/**
 * Runs constantly in the background, in a loop.
 */
void matrix_scan_user(void) {
  uint8_t layer = biton32(layer_state);

  ergodox_board_led_off();
  ergodox_led_lower_off();
  ergodox_led_raise_off();
  ergodox_led_adjust_off();

  switch (layer) {
    case _LOWER:
      ergodox_led_lower_on();
      break;
    case _RAISE:
      ergodox_led_raise_on();
      break;
    case _ADJUST:
      ergodox_led_adjust_on();
      break;
  }
};

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:23，代码来源:keymap.c

注：本文中的ergodox_board_led_off函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ergodox_right_led_1_off函数代码示例发布时间：2022-05-30

C++ erfc函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9671|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8667|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ ergodox_board_led_off函数代码示例

示例1: matrix_scan_user

示例2: matrix_init_user

示例3: matrix_scan_user

示例4: matrix_scan_keymap

示例5: dance_flsh_each

示例6: matrix_scan_user

示例7: matrix_scan_user

示例8: matrix_scan_user

示例9: matrix_scan_keymap

示例10: matrix_scan_user

示例11: matrix_scan_user

示例12: matrix_scan_user

示例13: matrix_scan_user

示例14: matrix_scan_user

示例15: matrix_init_user

示例16: matrix_scan_user

示例17: matrix_scan_user

示例18: matrix_scan_user

示例19: matrix_scan_user

示例20: matrix_scan_user

请发表评论

全部评论

上一篇：

下一篇：

solegalli/feature-selection-for-machine-

tianli/matlab_offscreen: Matlab offscree

win7系统重装系统初始设置的操作方法

これがマストドンだ！ 使い方からインスタ

CVE-2022-34216

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ