C++ enter_blocking_section函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中enter_blocking_section函数的典型用法代码示例。如果您正苦于以下问题：C++ enter_blocking_section函数的具体用法？C++ enter_blocking_section怎么用？C++ enter_blocking_section使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了enter_blocking_section函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: unix_read

CAMLprim value unix_read(value fd, value buf, value ofs, value vlen)
{
  intnat len;
  DWORD numbytes, numread;
  char iobuf[UNIX_BUFFER_SIZE];
  DWORD err = 0;

  Begin_root (buf);
    len = Long_val(vlen);
    numbytes = len > UNIX_BUFFER_SIZE ? UNIX_BUFFER_SIZE : len;
    if (Descr_kind_val(fd) == KIND_SOCKET) {
      int ret;
      SOCKET s = Socket_val(fd);
      enter_blocking_section();
      ret = recv(s, iobuf, numbytes, 0);
      if (ret == SOCKET_ERROR) err = WSAGetLastError();
      leave_blocking_section();
      numread = ret;
    } else {
      HANDLE h = Handle_val(fd);
      enter_blocking_section();
      if (! ReadFile(h, iobuf, numbytes, &numread, NULL))
        err = GetLastError();
      leave_blocking_section();
    }
    if (err) {
      win32_maperr(err);
      uerror("read", Nothing);
    }
    memmove (&Byte(buf, Long_val(ofs)), iobuf, numread);
  End_roots();
  return Val_int(numread);
}

开发者ID:MassD，项目名称:ocaml，代码行数:33，代码来源:read.c

示例2: unix_gethostbyaddr

CAMLprim value unix_gethostbyaddr(value a)
{
  struct in_addr adr = GET_INET_ADDR(a);
  struct hostent * hp;
#if HAS_GETHOSTBYADDR_R == 7
  struct hostent h;
  char buffer[NETDB_BUFFER_SIZE];
  int h_errnop;
  enter_blocking_section();
  hp = gethostbyaddr_r((char *) &adr, 4, AF_INET,
                       &h, buffer, sizeof(buffer), &h_errnop);
  leave_blocking_section();
#elif HAS_GETHOSTBYADDR_R == 8
  struct hostent h;
  char buffer[NETDB_BUFFER_SIZE];
  int h_errnop, rc;
  enter_blocking_section();
  rc = gethostbyaddr_r((char *) &adr, 4, AF_INET,
                       &h, buffer, sizeof(buffer), &hp, &h_errnop);
  leave_blocking_section();
  if (rc != 0) hp = NULL;
#else
#ifdef GETHOSTBYADDR_IS_REENTRANT
  enter_blocking_section();
#endif
  hp = gethostbyaddr((char *) &adr, 4, AF_INET);
#ifdef GETHOSTBYADDR_IS_REENTRANT
  leave_blocking_section();
#endif
#endif
  if (hp == (struct hostent *) NULL) raise_not_found();
  return alloc_host_entry(hp);
}

开发者ID:stedolan，项目名称:ocaml，代码行数:33，代码来源:gethost.c

示例3: unix_gethostbyname

CAMLprim value unix_gethostbyname(value name)
{
  struct hostent * hp;
  char * hostname;
#if HAS_GETHOSTBYNAME_R
  struct hostent h;
  char buffer[NETDB_BUFFER_SIZE];
  int err;
#endif

  if (! caml_string_is_c_safe(name)) raise_not_found();

#if HAS_GETHOSTBYNAME_R || GETHOSTBYNAME_IS_REENTRANT
  hostname = caml_strdup(String_val(name));
#else
  hostname = String_val(name);
#endif

#if HAS_GETHOSTBYNAME_R == 5
  {
    enter_blocking_section();
    hp = gethostbyname_r(hostname, &h, buffer, sizeof(buffer), &err);
    leave_blocking_section();
  }
#elif HAS_GETHOSTBYNAME_R == 6
  {
    int rc;
    enter_blocking_section();
    rc = gethostbyname_r(hostname, &h, buffer, sizeof(buffer), &hp, &err);
    leave_blocking_section();
    if (rc != 0) hp = NULL;
  }
#else
#ifdef GETHOSTBYNAME_IS_REENTRANT
  enter_blocking_section();
#endif
  hp = gethostbyname(hostname);
#ifdef GETHOSTBYNAME_IS_REENTRANT
  leave_blocking_section();
#endif
#endif

#if HAS_GETHOSTBYNAME_R || GETHOSTBYNAME_IS_REENTRANT
  stat_free(hostname);
#endif

  if (hp == (struct hostent *) NULL) raise_not_found();
  return alloc_host_entry(hp);
}

开发者ID:ocsigen，项目名称:ocaml-eliom，代码行数:49，代码来源:gethost.c

示例4: unix_recv

CAMLprim value unix_recv(value sock, value buff, value ofs, value len,
                         value flags)
{
  SOCKET s = Socket_val(sock);
  int flg = convert_flag_list(flags, msg_flag_table);
  int ret;
  intnat numbytes;
  char iobuf[UNIX_BUFFER_SIZE];
  DWORD err = 0;

  Begin_root (buff);
    numbytes = Long_val(len);
    if (numbytes > UNIX_BUFFER_SIZE) numbytes = UNIX_BUFFER_SIZE;
    enter_blocking_section();
    ret = recv(s, iobuf, (int) numbytes, flg);
    if (ret == -1) err = WSAGetLastError();
    leave_blocking_section();
    if (ret == -1) {
      win32_maperr(err);
      uerror("recv", Nothing);
    }
    memmove (&Byte(buff, Long_val(ofs)), iobuf, ret);
  End_roots();
  return Val_int(ret);
}

开发者ID:ocsigen，项目名称:ocaml-eliom，代码行数:25，代码来源:sendrecv.c

示例5: unix_write

CAMLprim value unix_write(value fd, value buf, value vofs, value vlen)
{
  long ofs, len, written;
  int numbytes, ret;
  char iobuf[UNIX_BUFFER_SIZE];

  Begin_root (buf);
    ofs = Long_val(vofs);
    len = Long_val(vlen);
    written = 0;
    while (len > 0) {
      numbytes = len > UNIX_BUFFER_SIZE ? UNIX_BUFFER_SIZE : len;
      memmove (iobuf, &Byte(buf, ofs), numbytes);
      enter_blocking_section();
      ret = write(Int_val(fd), iobuf, numbytes);
      leave_blocking_section();
      if (ret == -1) {
        if ((errno == EAGAIN || errno == EWOULDBLOCK) && written > 0) break;
        uerror("write", Nothing);
      }
      written += ret;
      ofs += ret;
      len -= ret;
    }
  End_roots();
  return Val_long(written);
}

开发者ID:BrianMulhall，项目名称:ocaml，代码行数:27，代码来源:write.c

示例6: unix_recvfrom

CAMLprim value unix_recvfrom(value sock, value buff, value ofs, value len,
                             value flags)
{
  int ret, cv_flags;
  long numbytes;
  char iobuf[UNIX_BUFFER_SIZE];
  value res;
  value adr = Val_unit;
  union sock_addr_union addr;
  socklen_param_type addr_len;

  cv_flags = convert_flag_list(flags, msg_flag_table);
  Begin_roots2 (buff, adr);
    numbytes = Long_val(len);
    if (numbytes > UNIX_BUFFER_SIZE) numbytes = UNIX_BUFFER_SIZE;
    addr_len = sizeof(addr);
    enter_blocking_section();
    ret = recvfrom(Int_val(sock), iobuf, (int) numbytes, cv_flags,
                   &addr.s_gen, &addr_len);
    leave_blocking_section();
    if (ret == -1) uerror("recvfrom", Nothing);
    memmove (&Byte(buff, Long_val(ofs)), iobuf, ret);
    adr = alloc_sockaddr(&addr, addr_len, -1);
    res = alloc_small(2, 0);
    Field(res, 0) = Val_int(ret);
    Field(res, 1) = adr;
  End_roots();
  return res;
}

开发者ID:ArnaudParant，项目名称:install_script，代码行数:29，代码来源:sendrecv.c

示例7: ml_ip_job_start

value ml_ip_job_start(value job_v)
{
  strcpy( (char*) job_hostname, String_val(Field(job_v,0)));

  if(!thread_started){
    int retcode;

    pthread_attr_t attr;
    pthread_attr_init(&attr);
    pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);

    pthread_cond_init(&cond, NULL);
    pthread_mutex_init(&mutex, NULL);

    thread_started = 1;
    retcode = pthread_create(&pthread, &attr, hasher_thread, NULL);

    if(retcode){
      perror("Error while starting Hashing thread");
      exit(2);
    }
  }

  enter_blocking_section();
  pthread_mutex_lock(&mutex);
/*  printf("Starting job\n");  */
  ip_job_done = 0; /* Thread can run ... */
  pthread_cond_signal(&cond);  
  pthread_mutex_unlock(&mutex);
  leave_blocking_section ();

  return Val_unit;
}

开发者ID:LuoZijun，项目名称:mldonkey，代码行数:33，代码来源:stubs_c.c

示例8: win_waitpid

CAMLprim value win_waitpid(value vflags, value vpid_req)
{
  int flags;
  DWORD status, retcode;
  HANDLE pid_req = (HANDLE) Long_val(vpid_req);
  DWORD err = 0;

  flags = convert_flag_list(vflags, wait_flag_table);
  if ((flags & CAML_WNOHANG) == 0) {
    enter_blocking_section();
    retcode = WaitForSingleObject(pid_req, INFINITE);
    if (retcode == WAIT_FAILED) err = GetLastError();
    leave_blocking_section();
    if (err) {
      win32_maperr(err);
      uerror("waitpid", Nothing);
    }
  }
  if (! GetExitCodeProcess(pid_req, &status)) {
    win32_maperr(GetLastError());
    uerror("waitpid", Nothing);
  }
  if (status == STILL_ACTIVE)
    return alloc_process_status((HANDLE) 0, 0);
  else {
    CloseHandle(pid_req);
    return alloc_process_status(pid_req, status);
  }
}

开发者ID:BrianMulhall，项目名称:ocaml，代码行数:29，代码来源:winwait.c

示例9: worker_job_submit

LPWORKER worker_job_submit (WORKERFUNC f, void *user_data)
{
  LPWORKER lpWorker = worker_pop();

#ifdef DBUG
  dbug_print("Waiting for worker to be ready");
#endif
  enter_blocking_section();
  WaitForSingleObject(lpWorker->hWorkerReady, INFINITE);
  ResetEvent(lpWorker->hWorkerReady);
  leave_blocking_section();
#ifdef DBUG
  dbug_print("Worker is ready");
#endif

  lpWorker->hJobFunc      = f;
  lpWorker->lpJobUserData = user_data;
  lpWorker->ECommand      = WORKER_CMD_EXEC;

#ifdef DBUG
  dbug_print("Call worker (func: %x, worker: %x)", f, lpWorker);
#endif
  SetEvent(lpWorker->hCommandReady);

  return (LPWORKER)lpWorker;
}

开发者ID:puppeh，项目名称:ocaml-sh4，代码行数:26，代码来源:winworker.c

示例10: unix_recvfrom

CAMLprim value unix_recvfrom(value sock, value buff, value ofs, value len, value flags)
{
    SOCKET s = Socket_val(sock);
    int flg = convert_flag_list(flags, msg_flag_table);
    int ret;
    intnat numbytes;
    char iobuf[UNIX_BUFFER_SIZE];
    value res;
    value adr = Val_unit;
    union sock_addr_union addr;
    socklen_param_type addr_len;
    DWORD err = 0;

    Begin_roots2 (buff, adr);
    numbytes = Long_val(len);
    if (numbytes > UNIX_BUFFER_SIZE) numbytes = UNIX_BUFFER_SIZE;
    addr_len = sizeof(sock_addr);
    enter_blocking_section();
    ret = recvfrom(s, iobuf, (int) numbytes, flg, &addr.s_gen, &addr_len);
    if (ret == -1) err = WSAGetLastError();
    leave_blocking_section();
    if (ret == -1) {
        win32_maperr(err);
        uerror("recvfrom", Nothing);
    }
    memmove (&Byte(buff, Long_val(ofs)), iobuf, ret);
    adr = alloc_sockaddr(&addr, addr_len, -1);
    res = alloc_small(2, 0);
    Field(res, 0) = Val_int(ret);
    Field(res, 1) = adr;
    End_roots();
    return res;
}

开发者ID:nodakai，项目名称:ocaml，代码行数:33，代码来源:sendrecv.c

示例11: stub_sendfile64

CAMLprim value stub_sendfile64(value in_fd, value out_fd, value len){
  CAMLparam3(in_fd, out_fd, len);
  CAMLlocal1(result);
  size_t c_len = Int64_val(len);
  size_t bytes;
  int c_in_fd = Int_val(in_fd);
  int c_out_fd = Int_val(out_fd);

  int rc = NOT_IMPLEMENTED;

  enter_blocking_section();

#ifdef __linux__
  rc = TRIED_AND_FAILED;
  bytes = sendfile(c_out_fd, c_in_fd, NULL, c_len);
  if (bytes != -1) rc = OK;
#endif

  leave_blocking_section();

  switch (rc) {
    case NOT_IMPLEMENTED:
      caml_failwith("This platform does not support sendfile()");
      break;
    case TRIED_AND_FAILED:
      uerror("sendfile", Nothing);
      break;
    default: break;
  }
  result = caml_copy_int64(bytes);
  CAMLreturn(result);
}

开发者ID:djs55，项目名称:vhd-tool，代码行数:32，代码来源:sendfile64_stubs.c

示例12: unix_getnameinfo

CAMLprim value unix_getnameinfo(value vaddr, value vopts)
{
  CAMLparam0();
  CAMLlocal3(vhost, vserv, vres);
  union sock_addr_union addr;
  socklen_param_type addr_len;
  char host[4096];
  char serv[1024];
  int opts, retcode;

  get_sockaddr(vaddr, &addr, &addr_len);
  opts = convert_flag_list(vopts, getnameinfo_flag_table);
  enter_blocking_section();
  retcode =
    getnameinfo((const struct sockaddr *) &addr.s_gen, addr_len,
                host, sizeof(host), serv, sizeof(serv), opts);
  leave_blocking_section();
  if (retcode != 0) raise_not_found(); /* TODO: detailed error reporting? */
  vhost = copy_string(host);
  vserv = copy_string(serv);
  vres = alloc_small(2, 0);
  Field(vres, 0) = vhost;
  Field(vres, 1) = vserv;
  CAMLreturn(vres);
}

开发者ID:mzp，项目名称:coq-for-ipad，代码行数:25，代码来源:getnameinfo.c

示例13: unix_sleep

CAMLprim value unix_sleep(value t)
{
  enter_blocking_section();
  sleep(Int_val(t));
  leave_blocking_section();
  return Val_unit;
}

开发者ID:OCamlPro，项目名称:OCamlPro-OCaml-Branch，代码行数:7，代码来源:sleep.c

示例14: unix_sendto_native

value unix_sendto_native(value sock, value buff, value ofs, value len, value flags, value dest)
{
    SOCKET s = Socket_val(sock);
    int flg = convert_flag_list(flags, msg_flag_table);
    int ret;
    intnat numbytes;
    char iobuf[UNIX_BUFFER_SIZE];
    union sock_addr_union addr;
    socklen_param_type addr_len;
    DWORD err = 0;

    get_sockaddr(dest, &addr, &addr_len);
    numbytes = Long_val(len);
    if (numbytes > UNIX_BUFFER_SIZE) numbytes = UNIX_BUFFER_SIZE;
    memmove (iobuf, &Byte(buff, Long_val(ofs)), numbytes);
    enter_blocking_section();
    ret = sendto(s, iobuf, (int) numbytes, flg, &addr.s_gen, addr_len);
    if (ret == -1) err = WSAGetLastError();
    leave_blocking_section();
    if (ret == -1) {
        win32_maperr(err);
        uerror("sendto", Nothing);
    }
    return Val_int(ret);
}

开发者ID:nodakai，项目名称:ocaml，代码行数:25，代码来源:sendrecv.c

示例15: caml_thread_delay

CAMLprim value caml_thread_delay(value val)
{
  enter_blocking_section();
  Sleep((DWORD)(Double_val(val)*1000)); /* milliseconds */
  leave_blocking_section();
  return Val_unit;
}

开发者ID:OpenXT，项目名称:ocaml，代码行数:7，代码来源:win32.c

示例16: caml_thread_yield

CAMLprim value caml_thread_yield(value unit)
{
  enter_blocking_section();
  Sleep(0);
  leave_blocking_section();
  return Val_unit;
}

开发者ID:OpenXT，项目名称:ocaml，代码行数:7，代码来源:win32.c

示例17: netsys_openat

CAMLprim value netsys_openat(value dirfd, value path, value flags, value perm)
{
#ifdef HAVE_AT
    CAMLparam4(dirfd, path, flags, perm);
    int ret, cv_flags;
    char * p;

    /* shamelessly copied from ocaml distro */
    cv_flags = convert_flag_list(flags, open_flag_table);
    p = stat_alloc(string_length(path) + 1);
    strcpy(p, String_val(path));
    enter_blocking_section();
    ret = openat(Int_val(dirfd), p, cv_flags, Int_val(perm));
    leave_blocking_section();
    stat_free(p);
    if (ret == -1) uerror("openat", path);
#if defined(NEED_CLOEXEC_EMULATION) && defined(FD_CLOEXEC)
    if (convert_flag_list(flags, open_cloexec_table) != 0) {
        int flags = fcntl(Int_val(dirfd), F_GETFD, 0);
        if (flags == -1 || fcntl(Int_val(dirfd), F_SETFD, flags | FD_CLOEXEC) == -1)
          uerror("openat", path);
    }
#endif
    CAMLreturn (Val_int(ret));
#else
    invalid_argument("Netsys_posix.openat not available");
#endif
}

开发者ID:flashfoxter，项目名称:libres3，代码行数:28，代码来源:netsys_c.c

示例18: onlyWin32_waitpids_ml

CAMLprim value onlyWin32_waitpids_ml(value ncount_v, value pid_reqs_v)
{
  int flags,i;
  DWORD status, retcode;
  DWORD err = 0;
  int ncount = Int_val(ncount_v);
  HANDLE* pid_reqs;
  HANDLE pid_req;

  pid_reqs = malloc(sizeof(HANDLE) * ncount);
  for(i=0; i < ncount; i++){
     pid_reqs[i] = (HANDLE) Long_val(Field(pid_reqs_v,i));
  }
  enter_blocking_section();
  retcode = WaitForMultipleObjects(ncount, pid_reqs, FALSE,INFINITE);
  if (retcode == WAIT_FAILED) err = GetLastError();
  leave_blocking_section();
  if (err) {
    free(pid_reqs);
    win32_maperr(err);
    uerror("waitpids", Nothing);
  }
  pid_req = pid_reqs[retcode - WAIT_OBJECT_0];
  free(pid_reqs);
  if (! GetExitCodeProcess(pid_req, &status)) {
    win32_maperr(GetLastError());
    uerror("waitpids", Nothing);
  }
  if (status == STILL_ACTIVE)
    return alloc_process_status((HANDLE) 0, 0);
  else {
    CloseHandle(pid_req);
    return alloc_process_status(pid_req, status);
  }
}

开发者ID:lefessan，项目名称:typerex-build，代码行数:35，代码来源:onlyWin32_c.c

示例19: caml_thread_yield

CAMLprim value caml_thread_yield(value unit)        /* ML */
{
  if (st_masterlock_waiters(&caml_master_lock) == 0) return Val_unit;
  enter_blocking_section();
  st_thread_yield();
  leave_blocking_section();
  return Val_unit;
}

开发者ID:avsm，项目名称:ocaml-ppa，代码行数:8，代码来源:st_stubs.c

示例20: sdltimer_delay

CAMLprim value
sdltimer_delay (value ms)
{
  enter_blocking_section();
  SDL_Delay(Int_val(ms));
  leave_blocking_section();
  return Val_unit;
}

开发者ID:MaintainersWanted，项目名称:OCamlSDL，代码行数:8，代码来源:sdltimer_stub.c

注：本文中的enter_blocking_section函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ enter_critical_section函数代码示例发布时间：2022-05-30

C++ enterState函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9671|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8667|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ enter_blocking_section函数代码示例

示例1: unix_read

示例2: unix_gethostbyaddr

示例3: unix_gethostbyname

示例4: unix_recv

示例5: unix_write

示例6: unix_recvfrom

示例7: ml_ip_job_start

示例8: win_waitpid

示例9: worker_job_submit

示例10: unix_recvfrom

示例11: stub_sendfile64

示例12: unix_getnameinfo

示例13: unix_sleep

示例14: unix_sendto_native

示例15: caml_thread_delay

示例16: caml_thread_yield

示例17: netsys_openat

示例18: onlyWin32_waitpids_ml

示例19: caml_thread_yield

示例20: sdltimer_delay

请发表评论

全部评论

上一篇：

下一篇：

solegalli/feature-selection-for-machine-

tianli/matlab_offscreen: Matlab offscree

win7系统重装系统初始设置的操作方法

これがマストドンだ！ 使い方からインスタ

CVE-2022-34216

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ