C++ elv_next_request函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中elv_next_request函数的典型用法代码示例。如果您正苦于以下问题：C++ elv_next_request函数的具体用法？C++ elv_next_request怎么用？C++ elv_next_request使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了elv_next_request函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: simpleblkdrv_do_request

static void simpleblkdrv_do_request(struct request_queue *q)
{
	struct request *req;
	while ((req = elv_next_request(q)) != NULL)
	{
		if ((req->sector + req->current_nr_sectors) << 9 > BLK_BYTES)
		{
			printk(KERN_ERR"request error!\n");
			end_request(req, 0);/*transfer fail*/
			continue;
		}

		switch (rq_data_dir(req))
		{
			case READ:
				memcpy(req->buffer, blkdev_data + (req->sector << 9), req->current_nr_sectors << 9);
				end_request(req, 1);/*transfer ok*/
				break;
			case WRITE:
				memcpy(blkdev_data + (req->sector << 9), req->buffer, req->current_nr_sectors << 9);
				end_request(req, 1);/*transfer ok*/
				break;
			default:
				/* No default because rq_data_dir(req) is 1 bit */
				break;
		}
	}
}

开发者ID:cherry-wb，项目名称:quietheart，代码行数:28，代码来源:simpleblkdrv.c

示例2: omap_mbox_read

static ssize_t
omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
{
    unsigned long flags;
    struct request *rq;
    mbox_msg_t *p = (mbox_msg_t *) buf;
    struct omap_mbox *mbox = dev_get_drvdata(dev);
    struct request_queue *q = mbox->rxq->queue;

    while (1) {
        spin_lock_irqsave(q->queue_lock, flags);
        rq = elv_next_request(q);
        spin_unlock_irqrestore(q->queue_lock, flags);

        if (!rq)
            break;

        *p = (mbox_msg_t) rq->data;

        if (blk_end_request(rq, 0, 0))
            BUG();

        if (unlikely(mbox_seq_test(mbox, *p))) {
            pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
            continue;
        }
        p++;
    }

    pr_debug("%02x %02x %02x %02x\n", buf[0], buf[1], buf[2], buf[3]);

    return (size_t) ((char *)p - buf);
}

开发者ID:274914765，项目名称:C，代码行数:33，代码来源:mailbox.c

示例3: do_mbd_request

static void do_mbd_request(request_queue_t * q)
{
	int result = 0;
	struct request *req;

	while ((req = elv_next_request(q)) != NULL) {
		int minor = req->rq_disk->first_minor;

		switch (rq_data_dir(req)) {
		case READ:
			result = MamboBogusDiskRead(minor,
						    req->buffer, req->sector,
						    req->current_nr_sectors);
			break;
		case WRITE:
			result = MamboBogusDiskWrite(minor,
						     req->buffer, req->sector,
						     req->current_nr_sectors);
		};

		if (result)
			end_request(req, 0);	/* failure */
		else
			end_request(req, 1);	/* success */
	}
}

开发者ID:BackupTheBerlios，项目名称:arp2-svn，代码行数:26，代码来源:mambo_bd.c

示例4: mtd_blktrans_thread

static int mtd_blktrans_thread(void *arg)
{
	struct mtd_blktrans_ops *tr = arg;
	struct request_queue *rq = tr->blkcore_priv->rq;

	/* we might get involved when memory gets low, so use PF_MEMALLOC */
	current->flags |= PF_MEMALLOC | PF_NOFREEZE;

	daemonize("%sd", tr->name);

	/* daemonize() doesn't do this for us since some kernel threads
	   actually want to deal with signals. We can't just call
	   exit_sighand() since that'll cause an oops when we finally
	   do exit. */
	spin_lock_irq(&current->sighand->siglock);
	sigfillset(&current->blocked);
	recalc_sigpending();
	spin_unlock_irq(&current->sighand->siglock);

	spin_lock_irq(rq->queue_lock);

	while (!tr->blkcore_priv->exiting) {
		struct request *req;
		struct mtd_blktrans_dev *dev;
		int res = 0;
		DECLARE_WAITQUEUE(wait, current);

		req = elv_next_request(rq);

		if (!req) {
			add_wait_queue(&tr->blkcore_priv->thread_wq, &wait);
			set_current_state(TASK_INTERRUPTIBLE);

			spin_unlock_irq(rq->queue_lock);

			schedule();
			remove_wait_queue(&tr->blkcore_priv->thread_wq, &wait);

			spin_lock_irq(rq->queue_lock);

			continue;
		}

		dev = req->rq_disk->private_data;
		tr = dev->tr;

		spin_unlock_irq(rq->queue_lock);

		down(&dev->sem);
		res = do_blktrans_request(tr, dev, req);
		up(&dev->sem);

		spin_lock_irq(rq->queue_lock);

		end_request(req, res);
	}
	spin_unlock_irq(rq->queue_lock);

	complete_and_exit(&tr->blkcore_priv->thread_dead, 0);
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5，代码行数:60，代码来源:mtd_blkdevs.c

示例5: do_ramdisk_request

static void do_ramdisk_request (request_queue_t * q)
{
	static int r_cnt = 0;
	static int w_cnt = 0;
	struct request *req;

//	printk("do_ramdisk_request = %d \n",++cnt);
	while ((req = elv_next_request(q)) != NULL)
	{
		/*数据传输3要素 : 源，目的，长度*/
		/*源/目的*/
		unsigned long offset = req->sector *512;

		/*目的/源*/
		//req->buffer
		/*长度*/
		unsigned long len  = req->current_nr_sectors *512;

		if (rq_data_dir(req) == READ)
		{
			printk("do_ramdisk_request read = %d \n",++r_cnt);
			memcpy(req->buffer, ramblock_buf+offset, len);
			
		}
		else
		{
			printk("do_ramdisk_request wirte = %d \n",++w_cnt);
			memcpy(ramblock_buf+offset,req->buffer,  len);
		}
		
		end_request(req, 1);	/* wrap up, 0 = fail, 1 = success */
	}	
}

开发者ID:wareash，项目名称:jz2440_drive_and_test，代码行数:33，代码来源:ramdisk.c

示例6: Virtual_blkdev_do_request

static void Virtual_blkdev_do_request(struct request_queue *q)
{
	struct request *req;
	while ((req = elv_next_request(q)) != NULL) 
	{
		if ((req->sector + req->current_nr_sectors) << 9> VIRTUAL_BLKDEV_BYTES) 
		{
		printk(KERN_ERR VIRTUAL_BLKDEV_DISKNAME": bad request: block=%llu, count=%u\n",
			(unsigned long long)req->sector,
			req->current_nr_sectors);
		end_request(req, 0);
		continue;
	    }/*endif*/
		switch (rq_data_dir(req)) 
		{
			case READ:
				memcpy(req->buffer,Virtual_blkdev_data + (req->sector << 9),
					req->current_nr_sectors << 9);
				end_request(req, 1);
				break;
			case WRITE:
				memcpy(Virtual_blkdev_data + (req->sector << 9),
					req->buffer, req->current_nr_sectors << 9);
				end_request(req, 1);
				break;
			default:
				/* No default because rq_data_dir(req) is 1 bit */
				break;
		}
	}/*endwhile*/
}

开发者ID:gatieme，项目名称:LDD-LinuxDeviceDrivers，代码行数:31，代码来源:Virtual_blkdev.c

示例7: do_z2_request

static void do_z2_request(struct request_queue *q)
{
	struct request *req;
	while ((req = elv_next_request(q)) != NULL) {
		unsigned long start = req->sector << 9;
		unsigned long len  = req->current_nr_sectors << 9;

		if (start + len > z2ram_size) {
			printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n",
				req->sector, req->current_nr_sectors);
			end_request(req, 0);
			continue;
		}
		while (len) {
			unsigned long addr = start & Z2RAM_CHUNKMASK;
			unsigned long size = Z2RAM_CHUNKSIZE - addr;
			if (len < size)
				size = len;
			addr += z2ram_map[ start >> Z2RAM_CHUNKSHIFT ];
			if (rq_data_dir(req) == READ)
				memcpy(req->buffer, (char *)addr, size);
			else
				memcpy((char *)addr, req->buffer, size);
			start += size;
			len -= size;
		}
		end_request(req, 1);
	}
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:29，代码来源:z2ram.c

示例8: virtualblockdevice_do_request

static void virtualblockdevice_do_request(struct request_queue *q)
{
	struct request *req;

//	printk(KERN_ALERT "VirtualBlockDevice: Entry virtualblockdevice_do_request !\n");

	while( NULL != ( req = elv_next_request( q ) ) ) {
		if( ( ( req->sector + req->current_nr_sectors ) << 9 ) > VIRTUALBLOCKDEVICE_DISK_CAPACITY ) {
			printk(KERN_ALERT "VirtualBlockDevice: bad request: start sector: = %llu\t sector count: = %lu \n", (unsigned long long) req->sector, (unsigned long)req->current_nr_sectors);
			end_request( req, 0 );
			continue;
		}
		printk(KERN_ALERT "VirtualBlockDevice: request: start sector: = %llu\t sector count: = %lu \n", (unsigned long long) req->sector, (unsigned long)req->current_nr_sectors);

		switch( rq_data_dir( req ) ) {
		case READ:
			memcpy( req->buffer, (virtualblockdevice_data + (req->sector << 9)), (req->current_nr_sectors << 9) );
			end_request( req, 1 );
			break;
		case WRITE:
			memcpy( (virtualblockdevice_data + (req->sector << 9)), req->buffer, (req->current_nr_sectors << 9) );
			end_request( req, 1 );
			break;
		default:
			printk(KERN_ALERT "VirtualBlockDevice: Unknown data direction !\n");
			break;
		}
	}
}

开发者ID:winlin，项目名称:Linux-Embeded-Class-Code，代码行数:29，代码来源:virtualblockdevice.c

示例9: do_ramblock_request

static void do_ramblock_request(request_queue_t * q)
{
	static int r_cnt = 0;
	static int w_cnt = 0;
	struct request *req;
	
	//printk("do_ramblock_request %d\n", ++cnt);

	while ((req = elv_next_request(q)) != NULL) {
		/* 数据传输三要素: 源,目的,长度 */
		/* 源/目的: */
		unsigned long offset = req->sector * 512;

		/* 目的/源: */
		// req->buffer

		/* 长度: */		
		unsigned long len = req->current_nr_sectors * 512;

		if (rq_data_dir(req) == READ)
		{
			//printk("do_ramblock_request read %d\n", ++r_cnt);
			memcpy(req->buffer, ramblock_buf+offset, len);
		}
		else
		{
			//printk("do_ramblock_request write %d\n", ++w_cnt);
			memcpy(ramblock_buf+offset, req->buffer, len);
		}		
		
		end_request(req, 1);
	}
}

开发者ID:commshare，项目名称:ARMDriver，代码行数:33，代码来源:ramblock.c

示例10: do_ramblock_request

static void do_ramblock_request(request_queue_t *q)
{
	struct request *req;

	while ((req = elv_next_request(q)) != NULL) 
	{
		/* 数据传输三要素:源，目的，长度 */
		/* 源/目的 */
		unsigned long offset = req->sector << 9;

		/* 目的/源 */
		/* req->buffer */
		
		/* 长度 */
		unsigned long len  = req->current_nr_sectors << 9;

		if (rq_data_dir(req) == READ)
		{
			memcpy(req->buffer, ramblock_buf+offset, len);
		}
		else
		{
			memcpy(ramblock_buf+offset, req->buffer, len);
		}

 		end_request(req, 1);
	}
	
}

开发者ID:54shady，项目名称:mini2440_drv，代码行数:29，代码来源:ramblock.c

示例11: mmc_request

/*
 * Generic MMC request handler.  This is called for any queue on a
 * particular host.  When the host is not busy, we look for a request
 * on any queue on this host, and attempt to issue it.  This may
 * not be the queue we were asked to process.
 */
static void mmc_request(struct request_queue *q)
{
	struct mmc_queue *mq = q->queuedata;
	struct request *req;
	int ret, count = 0;

	if (!mq) {
		printk(KERN_ERR "MMC: killing requests for dead queue\n");
		while ((req = elv_next_request(q)) != NULL) {
			do {
				ret = end_that_request_chunk(req, 0,
					req->current_nr_sectors << 9);
				count++;
				if (count > 100) {
				/* dequeue the request in the queue */
					printk(KERN_ERR "dequeue req\n");
					blkdev_dequeue_request(req);
					break;
				}
			count++;
			} while (ret);
		}
		return;
	}
	if (!mq->req)
		wake_up_process(mq->thread);
}

开发者ID:R0-Developers，项目名称:YP-R0_Kernel，代码行数:33，代码来源:queue.c

示例12: mem_block_requeut_fn

static void mem_block_requeut_fn(struct request_queue* q)
{
    struct request* req = NULL;
   while(NULL != (req = elv_next_request(q))) 
   {
       if(req -> sector + req -> current_nr_sectors > get_capacity(req->rq_disk))
       {
           end_request(req,0);
          // return 0;
          LogPath();
          continue;
       }
  //  Log("sector:%d,current_nr_sectors:%d",req->sector,req->current_nr_sectors);
       switch(rq_data_dir(req))
       {
           case READ:
           {
               memcpy(req->buffer,g_mem_buf + (req->sector << 9),req->current_nr_sectors << 9);
               end_request(req,1);
               break;
           }
           case WRITE:
           {
               memcpy(g_mem_buf + (req->sector << 9), req->buffer,req->current_nr_sectors << 9);
               end_request(req,1);
                break;
           }
           default:
                Log("[Error] Unknown request...");
				break;
             //   return 0;
       }
   }
}

开发者ID:laitianli，项目名称:loongson-linux-2.6.36-3_mips，代码行数:34，代码来源:block_demo.c

示例13: mbox_tx_work

static void mbox_tx_work(struct work_struct *work)
{
    int ret;
    struct request *rq;
    struct omap_mbox_queue *mq = container_of(work,
                struct omap_mbox_queue, work);
    struct omap_mbox *mbox = mq->queue->queuedata;
    struct request_queue *q = mbox->txq->queue;

    while (1) {
        spin_lock(q->queue_lock);
        rq = elv_next_request(q);
        spin_unlock(q->queue_lock);

        if (!rq)
            break;

        ret = __mbox_msg_send(mbox, (mbox_msg_t) rq->data, rq->special);
        if (ret) {
            enable_mbox_irq(mbox, IRQ_TX);
            return;
        }

        spin_lock(q->queue_lock);
        if (__blk_end_request(rq, 0, 0))
            BUG();
        spin_unlock(q->queue_lock);
    }
}

开发者ID:274914765，项目名称:C，代码行数:29，代码来源:mailbox.c

示例14: mbox_rx_work

/*
 * Message receiver(workqueue)
 */
static void mbox_rx_work(struct work_struct *work)
{
    struct omap_mbox_queue *mq =
            container_of(work, struct omap_mbox_queue, work);
    struct omap_mbox *mbox = mq->queue->queuedata;
    struct request_queue *q = mbox->rxq->queue;
    struct request *rq;
    mbox_msg_t msg;
    unsigned long flags;

    if (mbox->rxq->callback == NULL) {
        sysfs_notify(&mbox->dev.kobj, NULL, "mbox");
        return;
    }

    while (1) {
        spin_lock_irqsave(q->queue_lock, flags);
        rq = elv_next_request(q);
        spin_unlock_irqrestore(q->queue_lock, flags);
        if (!rq)
            break;

        msg = (mbox_msg_t) rq->data;

        if (blk_end_request(rq, 0, 0))
            BUG();

        mbox->rxq->callback((void *)msg);
    }
}

开发者ID:274914765，项目名称:C，代码行数:33，代码来源:mailbox.c

示例15: request_exemple

static void request_exemple(request_queue_t * rqueue)
{
	unsigned long secteur_debut;
	unsigned long nb_secteurs;
	struct request * rq;

	while ((rq = elv_next_request(rqueue)) != NULL) {
		if (! blk_fs_request(rq)) {
			end_request(rq, 0);
			continue;
		}
		
		/*
		 * Les numeros de secteurs pour le transfert correspondent 
		 * a des secteurs de 512 octets... -> convertir.
		 */
		secteur_debut = rq->sector * 512 / lg_sect_exemple;
		nb_secteurs   = rq->current_nr_sectors * 512 / lg_sect_exemple;
		if (secteur_debut + nb_secteurs > nb_sect_exemple) {
			end_request(rq,1);
			continue;
		}
		if (rq_data_dir(rq)) /* write */
			memmove(& data_exemple[secteur_debut * lg_sect_exemple],
			        rq->buffer,
			        nb_secteurs * lg_sect_exemple);
		else /* read */
			memmove(rq->buffer,
			        & data_exemple[secteur_debut * lg_sect_exemple],
			        nb_secteurs * lg_sect_exemple);
		end_request(rq, 1);
	}
}

开发者ID:YorkZ，项目名称:docs_utils，代码行数:33，代码来源:exemple_05.c

示例16: osprd_process_request_queue

static void osprd_process_request_queue(request_queue_t *q)
{
	osprd_info_t *d = (osprd_info_t *) q->queuedata;
	struct request *req;

	while ((req = elv_next_request(q)) != NULL)
		osprd_process_request(d, req);
}

开发者ID:metropolisDT，项目名称:CS111，代码行数:8，代码来源:osprd.c

示例17: start_request

static void start_request(struct floppy_state *fs)
{
	struct request *req;
	unsigned long x;

	if (fs->state == idle && fs->wanted) {
		fs->state = available;
		wake_up(&fs->wait);
		return;
	}
	while (fs->state == idle && (req = elv_next_request(swim3_queue))) {
#if 0
		printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
		       req->rq_disk->disk_name, req->cmd,
		       (long)req->sector, req->nr_sectors, req->buffer);
		printk("           rq_status=%d errors=%d current_nr_sectors=%ld\n",
		       req->rq_status, req->errors, req->current_nr_sectors);
#endif

		if (req->sector < 0 || req->sector >= fs->total_secs) {
			end_request(req, 0);
			continue;
		}
		if (req->current_nr_sectors == 0) {
			end_request(req, 1);
			continue;
		}
		if (fs->ejected) {
			end_request(req, 0);
			continue;
		}

		if (rq_data_dir(req) == WRITE) {
			if (fs->write_prot < 0)
				fs->write_prot = swim3_readbit(fs, WRITE_PROT);
			if (fs->write_prot) {
				end_request(req, 0);
				continue;
			}
		}

		/* Do not remove the cast. req->sector is now a sector_t and
		 * can be 64 bits, but it will never go past 32 bits for this
		 * driver anyway, so we can safely cast it down and not have
		 * to do a 64/32 division
		 */
		fs->req_cyl = ((long)req->sector) / fs->secpercyl;
		x = ((long)req->sector) % fs->secpercyl;
		fs->head = x / fs->secpertrack;
		fs->req_sector = x % fs->secpertrack + 1;
		fd_req = req;
		fs->state = do_transfer;
		fs->retries = 0;

		act(fs);
	}
}

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:57，代码来源:swim3.c

示例18: tbio_request

static void tbio_request(request_queue_t *q)
{
	struct request *req;

	while (( req = elv_next_request(q)) != NULL) {

		tbio_transfer(req , &Device);
		end_request(req , 1);
	}
}

开发者ID:ystk，项目名称:debian-ltp，代码行数:10，代码来源:tbio.c

示例19: start_request

static void start_request(struct floppy_state *fs)
{
	struct request *req;
	unsigned long x;

	if (fs->state == idle && fs->wanted) {
		fs->state = available;
		wake_up(&fs->wait);
		return;
	}
	while (fs->state == idle && (req = elv_next_request(swim3_queue))) {
#if 0
		printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
		       req->rq_disk->disk_name, req->cmd,
		       req->sector, req->nr_sectors, req->buffer);
		printk("           rq_status=%d errors=%d current_nr_sectors=%ld\n",
		       req->rq_status, req->errors, req->current_nr_sectors);
#endif

		if (req->sector < 0 || req->sector >= fs->total_secs) {
			end_request(req, 0);
			continue;
		}
		if (req->current_nr_sectors == 0) {
			end_request(req, 1);
			continue;
		}
		if (fs->ejected) {
			end_request(req, 0);
			continue;
		}

		if (rq_data_dir(req) == WRITE) {
			if (fs->write_prot < 0)
				fs->write_prot = swim3_readbit(fs, WRITE_PROT);
			if (fs->write_prot) {
				end_request(req, 0);
				continue;
			}
		}

		fs->req_cyl = req->sector / fs->secpercyl;
		x = req->sector % fs->secpercyl;
		fs->head = x / fs->secpertrack;
		fs->req_sector = x % fs->secpertrack + 1;
		fd_req = req;
		fs->state = do_transfer;
		fs->retries = 0;

		act(fs);
	}
}

开发者ID:sarnobat，项目名称:knoppix，代码行数:52，代码来源:swim3.c

示例20: ubiblk_request

/*
 * The simple form of the request function.
 */
static void ubiblk_request(request_queue_t *q)
{
	struct request *req;

	while ((req = elv_next_request(q)) != NULL) {
		struct ubiblk_dev *dev = req->rq_disk->private_data;
		if(! blk_fs_request(req)) {
			printk (KERN_NOTICE "Skip non-fs request\n");
			end_request(req, 0);
			continue;
		}
		ubiblk_transfer(dev, req->sector, req->current_nr_sectors,
				req->buffer, rq_data_dir(req));
		end_request(req, 1);
	}
}

开发者ID:BackupTheBerlios，项目名称:opendidj，代码行数:19，代码来源:ubiblock.c

注：本文中的elv_next_request函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ elv_rb_add函数代码示例发布时间：2022-05-30

C++ elv_dispatch_add_tail函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19240|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10001|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8647|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9672|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8668|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

C++ elv_next_request函数代码示例

示例1: simpleblkdrv_do_request

示例2: omap_mbox_read

示例3: do_mbd_request

示例4: mtd_blktrans_thread

示例5: do_ramdisk_request

示例6: Virtual_blkdev_do_request

示例7: do_z2_request

示例8: virtualblockdevice_do_request

示例9: do_ramblock_request

示例10: do_ramblock_request

示例11: mmc_request

示例12: mem_block_requeut_fn

示例13: mbox_tx_work

示例14: mbox_rx_work

示例15: request_exemple

示例16: osprd_process_request_queue

示例17: start_request

示例18: tbio_request

示例19: start_request

示例20: ubiblk_request

请发表评论

全部评论

上一篇：

下一篇：

revolunet/angular-carousel: Mobile frien

dphi-official/Machine_Learning_Bootcamp

juven/maven-bash-completion: Maven Bash

adrielcafe/AndroidAudioRecorder: A fancy

route101/mastoinker: Quick image view as

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053