C++ eeconfig_init函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中eeconfig_init函数的典型用法代码示例。如果您正苦于以下问题：C++ eeconfig_init函数的具体用法？C++ eeconfig_init怎么用？C++ eeconfig_init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了eeconfig_init函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rgb_matrix_init

void rgb_matrix_init(void) {
  rgb_matrix_driver.init();

  // TODO: put the 1 second startup delay here?

#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
  g_last_hit_tracker.count = 0;
  for (uint8_t i = 0; i < LED_HITS_TO_REMEMBER; ++i) {
    g_last_hit_tracker.tick[i] = UINT16_MAX;
  }

  last_hit_buffer.count = 0;
  for (uint8_t i = 0; i < LED_HITS_TO_REMEMBER; ++i) {
    last_hit_buffer.tick[i] = UINT16_MAX;
  }
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED

  if (!eeconfig_is_enabled()) {
    dprintf("rgb_matrix_init_drivers eeconfig is not enabled.\n");
    eeconfig_init();
    eeconfig_update_rgb_matrix_default();
  }

  rgb_matrix_config.raw = eeconfig_read_rgb_matrix();
  rgb_matrix_config.speed = UINT8_MAX / 2; //EECONFIG needs to be increased to support this
  if (!rgb_matrix_config.mode) {
    dprintf("rgb_matrix_init_drivers rgb_matrix_config.mode = 0. Write default values to EEPROM.\n");
    eeconfig_update_rgb_matrix_default();
    rgb_matrix_config.raw = eeconfig_read_rgb_matrix();
  }
  eeconfig_debug_rgb_matrix(); // display current eeprom values
}

开发者ID:Xyverz，项目名称:qmk_firmware，代码行数:32，代码来源:rgb_matrix.c

示例2: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    // dynamically generate these.
    case EPRM:
      if (record->event.pressed) {
        eeconfig_init();
      }
      return false;
      break;
    case VRSN:
      if (record->event.pressed) {
        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
      }
      return false;
      break;
    case RGB_SLD:
      if (record->event.pressed) {
        #ifdef RGBLIGHT_ENABLE
          rgblight_mode(1);
        #endif
      }
      return false;
      break;
  }
  return true;
}

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:26，代码来源:keymap.c

示例3: switch

const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
  // MACRODOWN only works in this function
  switch(id) {
    case 0:
    if (record->event.pressed) {
      SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
    }
    break;
    case 1:
    if (record->event.pressed) { // For resetting EEPROM
      eeconfig_init();
    }
    break;
#ifdef CFQ_USE_EXPEREMENTAL_LAYER
    case M_SPACES_1:
      if (record->event.pressed) { return MACRO(T(SPC), END); }
    case M_SPACES_2:
      if (record->event.pressed) { return MACRO(T(SPC), T(SPC), END); }
    case M_SPACES_3:
      if (record->event.pressed) { return MACRO(T(SPC), T(SPC), T(SPC), END); }
    case M_SPACES_4:
      if (record->event.pressed) { return MACRO(T(SPC), T(SPC), T(SPC), T(SPC), END); }
    case M_SPACES_5:
      if (record->event.pressed) { return MACRO(T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), END); }
    case M_SPACES_6:
      if (record->event.pressed) { return MACRO(T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), END); }
    case M_SPACES_7:
      if (record->event.pressed) { return MACRO(T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), END); }
    case M_SPACES_8:
      if (record->event.pressed) { return MACRO(T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), T(SPC), END); }
#endif // CFQ_USE_EXPEREMENTAL_LAYER
    case M_BRACKET_IN_CBR: // {}
      if (record->event.pressed) { return MACRO(D(LSFT), T(LBRC), T(RBRC), U(LSFT), T(LEFT), END); }
    case M_BRACKET_IN_PRN: // ()
      if (record->event.pressed) { return MACRO(D(LSFT), T(9), T(0), U(LSFT), T(LEFT), END); }
    case M_BRACKET_IN_BRC: // []
      if (record->event.pressed) { return MACRO(T(LBRC), T(RBRC), T(LEFT), END); }
    case M_BRACKET_IN_ANG: // <>
      if (record->event.pressed) { return MACRO(D(LSFT), T(COMM), T(DOT), U(LSFT), T(LEFT), END); }
    case M_BRACKET_OUT_CBR: // }{
      if (record->event.pressed) { return MACRO(D(LSFT), T(RBRC), T(LBRC), U(LSFT), T(LEFT), END); }
    case M_BRACKET_OUT_PRN: // )(
      if (record->event.pressed) { return MACRO(D(LSFT), T(0), T(9), U(LSFT), T(LEFT), END); }
    case M_BRACKET_OUT_BRC: // ][
      if (record->event.pressed) { return MACRO(T(RBRC), T(LBRC), T(LEFT), END); }
    case M_BRACKET_OUT_ANG: // ><
      if (record->event.pressed) { return MACRO(D(LSFT), T(DOT), T(COMM), U(LSFT), T(LEFT), END); }

    case M_ARROW_RMINUS:
      if (record->event.pressed) { return MACRO(T(MINUS), D(LSFT), T(DOT), U(LSFT), END); }
    case M_ARROW_LMINUS:
      if (record->event.pressed) { return MACRO(D(LSFT), T(COMM), U(LSFT), T(MINUS), END); }
    case M_ARROW_REQL:
      if (record->event.pressed) { return MACRO(T(EQL), D(LSFT), T(DOT), U(LSFT), END); }
    case M_ARROW_LEQL:
      if (record->event.pressed) { return MACRO(D(LSFT), T(COMM), U(LSFT), T(EQL), END); }
  }
  return MACRO_NONE;
};

开发者ID:ScrelliCopter，项目名称:qmk_firmware，代码行数:60，代码来源:keymap.c

示例4: rgblight_init

void rgblight_init(void) {
  debug_enable = 1; // Debug ON!
  dprintf("rgblight_init called.\n");
  dprintf("rgblight_init start!\n");
  if (!eeconfig_is_enabled()) {
    dprintf("rgblight_init eeconfig is not enabled.\n");
    eeconfig_init();
    eeconfig_update_rgblight_default();
  }
  rgblight_config.raw = eeconfig_read_rgblight();
  if (!rgblight_config.mode) {
    dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n");
    eeconfig_update_rgblight_default();
    rgblight_config.raw = eeconfig_read_rgblight();
  }
  eeconfig_debug_rgblight(); // display current eeprom values

  #ifdef RGBLIGHT_ANIMATIONS
    rgblight_timer_init(); // setup the timer
  #endif

  if (rgblight_config.enable) {
    rgblight_mode_noeeprom(rgblight_config.mode);
  }
}

开发者ID:anechiporuk，项目名称:qmk_firmware，代码行数:25，代码来源:rgblight.c

示例5: backlight_init

void backlight_init(void)
{
    /* check signature */
    if (!eeconfig_is_enabled()) {
        eeconfig_init();
    }
    backlight_config.raw = eeconfig_read_backlight();
    backlight_set(backlight_config.enable ? backlight_config.level : 0);
}

开发者ID:kairyu，项目名称:tmk_core_custom，代码行数:9，代码来源:backlight.c

示例6: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case DVORAK:
      if (record->event.pressed) {
        set_single_persistent_default_layer(_DVORAK);
      }
      return false;
      break;
    case BACKLIT:
      if (record->event.pressed) {
        register_code(KC_RSFT);
        #ifdef BACKLIGHT_ENABLE
          backlight_step();
        #endif
        #ifdef KEYBOARD_planck_rev5
          PORTE &= ~(1<<6);
        #endif
      } else {
        unregister_code(KC_RSFT);
        #ifdef KEYBOARD_planck_rev5
          PORTE |= (1<<6);
        #endif
      }
      return false;
      break;
    case PLOVER:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          stop_all_notes();
          PLAY_SONG(plover_song);
        #endif
        layer_off(_CUSTOM);
        layer_off(_RAISE);
        layer_off(_LOWER);
        layer_off(_ADJUST);
        layer_on(_PLOVER);
        if (!eeconfig_is_enabled()) {
            eeconfig_init();
        }
        keymap_config.raw = eeconfig_read_keymap();
        keymap_config.nkro = 1;
        eeconfig_update_keymap(keymap_config.raw);
      }
      return false;
      break;
    case EXT_PLV:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(plover_gb_song);
        #endif
        layer_off(_PLOVER);
      }
      return false;
      break;
  }
  return true;
}

开发者ID:david-pitty，项目名称:planck_layout，代码行数:57，代码来源:keymap.c

示例7: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        print("mode just switched to qwerty and this is a huge string\n");
        set_single_persistent_default_layer(_QWERTY);
      }
      return false; break;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false; break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false; break;
    case PLOVER:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          stop_all_notes();
          PLAY_SONG(plover_song);
        #endif
        layer_off(_RAISE);
        layer_off(_LOWER);
        layer_off(_ADJUST);
        layer_on(_PLOVER);
        if (!eeconfig_is_enabled()) {
            eeconfig_init();
        }
        keymap_config.raw = eeconfig_read_keymap();
        keymap_config.nkro = 1;
        eeconfig_update_keymap(keymap_config.raw);
      }
      return false; break;
    case EXT_PLV:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(plover_gb_song);
        #endif
        layer_off(_PLOVER);
      }
      return false; break;
  }
  return true;
}

开发者ID:0tsuki，项目名称:qmk_firmware，代码行数:55，代码来源:keymap.c

示例8: audio_init

void audio_init() {

  if (audio_initialized) {
    return;
  }

  // Check EEPROM
  #if defined(STM32_EEPROM_ENABLE) || defined(PROTOCOL_ARM_ATSAM) || defined(EEPROM_SIZE)
    if (!eeconfig_is_enabled()) {
      eeconfig_init();
    }
    audio_config.raw = eeconfig_read_audio();
#else // ARM EEPROM
    audio_config.enable = true;
  #ifdef AUDIO_CLICKY_ON
    audio_config.clicky_enable = true;
  #endif
#endif // ARM EEPROM

  /*
   * Starting DAC1 driver, setting up the output pin as analog as suggested
   * by the Reference Manual.
   */
  palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG);
  palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG);
  dacStart(&DACD1, &dac1cfg1);
  dacStart(&DACD2, &dac1cfg2);

  /*
   * Starting GPT6/7 driver, it is used for triggering the DAC.
   */
  START_CHANNEL_1();
  START_CHANNEL_2();

  /*
   * Starting a continuous conversion.
   */
  dacStartConversion(&DACD1, &dacgrpcfg1, (dacsample_t *)dac_buffer, DAC_BUFFER_SIZE);
  dacStartConversion(&DACD2, &dacgrpcfg2, (dacsample_t *)dac_buffer_2, DAC_BUFFER_SIZE);

  audio_initialized = true;

  if (audio_config.enable) {
    PLAY_SONG(startup_song);
  } else {
    stop_all_notes();
  }

}

开发者ID:Talljoe，项目名称:qmk_firmware，代码行数:49，代码来源:audio_arm.c

示例9: eeconfig_init

/*
 * Macro definition
 */
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
    if (!eeconfig_is_enabled()) {
      eeconfig_init();
    }

    switch (id) {
      case KC_DEMOMACRO:
        if (record->event.pressed){
          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
        }
    }

    return MACRO_NONE;
}

开发者ID:0tsuki，项目名称:qmk_firmware，代码行数:18，代码来源:keymap.c

示例10: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case STENO:
      if (record->event.pressed) {
#ifdef AUDIO_ENABLE
        stop_all_notes();
        PLAY_SONG(plover_song);
#endif
        layer_off(RAISE_LAYER);
        layer_off(LOWER_LAYER);
        layer_off(ADJUST_LAYER);
        layer_on(STENO_LAYER);
        if (!eeconfig_is_enabled()) {
          eeconfig_init();
        }
        keymap_config.raw = eeconfig_read_keymap();
        keymap_config.nkro = 1;
        eeconfig_update_keymap(keymap_config.raw);
        plover_resume();
      }
      return false;
    case PV_EXIT:
      if (record->event.pressed) {
#ifdef AUDIO_ENABLE
        PLAY_SONG(plover_gb_song);
#endif
        plover_suspend();
        layer_off(STENO_LAYER);
      }
      return false;
    case PV_LOOK:
      if (record->event.pressed) {
        plover_lookup();
      }
      return false;
    case SEND_VERSION:
      if (record->event.pressed) {
        SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP "@" QMK_VERSION " (" QMK_BUILDDATE ")");
      }
      return false;
    case SEND_MAKE:
      if (record->event.pressed) {
        SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP ":dfu\n");
      }
      return false;
  }
  return true;
}

开发者ID:algernon，项目名称:qmk_firmware，代码行数:48，代码来源:keymap.c

示例11: switch

const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
  // MACRODOWN only works in this function
      switch(id) {
        case 0:
        if (record->event.pressed) {
          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
        }
        break;
        case 1:
        if (record->event.pressed) { // For resetting EEPROM
          eeconfig_init();
        }
        break;
      }
    return MACRO_NONE;
};

开发者ID:robotmaxtron，项目名称:qmk_firmware，代码行数:17，代码来源:keymap.c

示例12: switch

const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
  switch (id)
  {
  case F_PASTE:
    if (record->event.pressed)
    {
      register_code(KC_LCTL);
      register_code(KC_V);
      unregister_code(KC_V);
      unregister_code(KC_LCTL);
    }
    break;
  case RGB_ANI:
    if (record->event.pressed)
    {
      rgb_timer = timer_read();
    }
    else
    {
      if (timer_elapsed(rgb_timer) > 300)
      {
        rgblight_mode(1);
      }
      else
      {
        rgblight_step();
      }
    }
  case CF_EPRM:
    if (record->event.pressed)
    {
      eeconfig_init();
    }
    return false;
    break;
  case CF_VERS:
    if (record->event.pressed)
    {
      SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
    }
    return false;
    break;
  }
  return MACRO_NONE;
};

开发者ID:berfarah，项目名称:qmk_firmware，代码行数:46，代码来源:keymap.c

示例13: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    // dynamically generate these.
    case EPRM:
      if (record->event.pressed) {
        eeconfig_init();
      }
      return false;
      break;
    case VRSN:
      if (record->event.pressed) {
        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
      }
      return false;
      break;
  }
  return true;
}

开发者ID:Bubblepoint，项目名称:qmk_firmware，代码行数:18，代码来源:keymap.c

示例14: magic

void magic(void)
{
    /* check signature */
    if (!eeconfig_is_enabled()) {
        eeconfig_init();
    }

    /* debug enable */
    debug_config.raw = eeconfig_read_debug();

    /* keymap config */
    keymap_config.raw = eeconfig_read_keymap();

    uint8_t default_layer = 0;
    default_layer = eeconfig_read_default_layer();
    default_layer_set((uint32_t)default_layer);

}

开发者ID:0tsuki，项目名称:qmk_firmware，代码行数:18，代码来源:magic.c

示例15: matrix_init_quantum

void matrix_init_quantum() {
  #ifdef BOOTMAGIC_LITE
    bootmagic_lite();
  #endif
  if (!eeconfig_is_enabled()) {
    eeconfig_init();
  }
  #ifdef BACKLIGHT_ENABLE
    backlight_init_ports();
  #endif
  #ifdef AUDIO_ENABLE
    audio_init();
  #endif
  #ifdef RGB_MATRIX_ENABLE
    rgb_matrix_init();
  #endif
  #ifdef ENCODER_ENABLE
    encoder_init();
  #endif
  matrix_init_kb();
}

开发者ID:oli-obk，项目名称:qmk_firmware，代码行数:21，代码来源:quantum.c

示例16: audio_init

void audio_init() {

    /* check signature */
    if (!eeconfig_is_enabled()) {
        eeconfig_init();
    }
    audio_config.raw = eeconfig_read_audio();

    #ifdef PWM_AUDIO
        PLLFRQ = _BV(PDIV2);
        PLLCSR = _BV(PLLE);
        while(!(PLLCSR & _BV(PLOCK)));
        PLLFRQ |= _BV(PLLTM0); /* PCK 48MHz */

        /* Init a fast PWM on Timer4 */
        TCCR4A = _BV(COM4A0) | _BV(PWM4A); /* Clear OC4A on Compare Match */
        TCCR4B = _BV(CS40); /* No prescaling => f = PCK/256 = 187500Hz */
        OCR4A = 0;

        /* Enable the OC4A output */
        DDRC |= _BV(PORTC6);

        TIMSK3 &= ~_BV(OCIE3A); // Turn off 3A interputs

        TCCR3A = 0x0; // Options not needed
        TCCR3B = _BV(CS31) | _BV(CS30) | _BV(WGM32); // 64th prescaling and CTC
        OCR3A = SAMPLE_DIVIDER - 1; // Correct count/compare, related to sample playback
    #else
        DDRC |= _BV(PORTC6);

        TIMSK3 &= ~_BV(OCIE3A); // Turn off 3A interputs

        TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30);
        TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30);
    #endif

    inited = true;
}

开发者ID:DonHansDampf，项目名称:qmk_firmware，代码行数:38，代码来源:audio.c

示例17: rgblight_init

void rgblight_init(void) {
  /* if already initialized, don't do it again.
     If you must do it again, extern this and set to false, first.
     This is a dirty, dirty hack until proper hooks can be added for keyboard startup. */
  if (is_rgblight_initialized) { return; }

  debug_enable = 1; // Debug ON!
  dprintf("rgblight_init called.\n");
  dprintf("rgblight_init start!\n");
  if (!eeconfig_is_enabled()) {
    dprintf("rgblight_init eeconfig is not enabled.\n");
    eeconfig_init();
    eeconfig_update_rgblight_default();
  }
  rgblight_config.raw = eeconfig_read_rgblight();
  RGBLIGHT_SPLIT_SET_CHANGE_HSVS;
  if (!rgblight_config.mode) {
    dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n");
    eeconfig_update_rgblight_default();
    rgblight_config.raw = eeconfig_read_rgblight();
  }
  rgblight_check_config();

  eeconfig_debug_rgblight(); // display current eeprom values

#ifdef RGBLIGHT_USE_TIMER
    rgblight_timer_init(); // setup the timer
#endif

  if (rgblight_config.enable) {
    rgblight_mode_noeeprom(rgblight_config.mode);
  }

  is_rgblight_initialized = true;

}

开发者ID:Xyverz，项目名称:qmk_firmware，代码行数:36，代码来源:rgblight.c

示例18: audio_init

void audio_init()
{

    // Check EEPROM
    if (!eeconfig_is_enabled())
    {
        eeconfig_init();
    }
    audio_config.raw = eeconfig_read_audio();

	// Set port PC6 (OC3A and /OC4A) as output
    DDRC |= _BV(PORTC6);

    DISABLE_AUDIO_COUNTER_3_ISR;

	// TCCR3A / TCCR3B: Timer/Counter #3 Control Registers
	// Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6
	// Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14 (Period = ICR3, Duty Cycle = OCR3A)
	// Clock Select (CS3n) = 0b010 = Clock / 8
    TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30);
    TCCR3B = (1 << WGM33)  | (1 << WGM32)  | (0 << CS32)  | (1 << CS31) | (0 << CS30);

    audio_initialized = true;
}

开发者ID:82times，项目名称:qmk_firmware，代码行数:24，代码来源:audio.c

示例19: switch

const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
  // MACRODOWN only works in this function
      switch(id) {
        case 0:
        if (record->event.pressed) {
          register_code(KC_RSFT);
        } else {
          unregister_code(KC_RSFT);
        }
        break;
        case 1:
        if (record->event.pressed) { // For resetting EEPROM
          eeconfig_init();
        }
        break;
        case 2:
        if (record->event.pressed) { // For resetting EEPROM
          api_send_unicode(0x0CA0);
        }
        break;
      }
    return MACRO_NONE;
};

开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:24，代码来源:keymap.c

示例20: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
        case QWERTY:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
            #endif
            persistent_default_layer_set(1UL<<_QWERTY);
          }
          break;
      return false;
        case COLEMAK:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
            #endif
            persistent_default_layer_set(1UL<<_COLEMAK);
          }
          break;
      return false;
        case DVORAK:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
            #endif
            persistent_default_layer_set(1UL<<_DVORAK);
          }
          break;
      return false;
        case LOWER:
          if (record->event.pressed) {
            layer_on(_LOWER);
            #ifdef BACKLIGHT_ENABLE
                breathing_speed_set(2);
                breathing_pulse();
            #endif
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_LOWER);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          break;
      return false;
        case RAISE:
          if (record->event.pressed) {
            layer_on(_RAISE);
            #ifdef BACKLIGHT_ENABLE
                breathing_speed_set(2);
                breathing_pulse();
            #endif
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_RAISE);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          break;
      return false;
        case BACKLIT:
          if (record->event.pressed) {
            register_code(KC_RSFT);
            #ifdef BACKLIGHT_ENABLE
              backlight_step();
            #endif
          } else {
            unregister_code(KC_RSFT);
          }
        break;
      return false;
        case PLOVER:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              stop_all_notes();
              PLAY_NOTE_ARRAY(tone_plover, false, 0);
            #endif
            layer_off(_RAISE);
            layer_off(_LOWER);
            layer_off(_ADJUST);
            layer_on(_PLOVER);
            if (!eeconfig_is_enabled()) {
                eeconfig_init();
            }
            keymap_config.raw = eeconfig_read_keymap();
            keymap_config.nkro = 1;
            eeconfig_update_keymap(keymap_config.raw);
          }
        break;
      return false;
        case EXT_PLV:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
            #endif
            layer_off(_PLOVER);
          }
        break;
      return false;

    case RGBLED_TOGGLE:
      //led operations
      if (record->event.pressed) {
//.........这里部分代码省略.........

开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:101，代码来源:keymap.c

注：本文中的eeconfig_init函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ eeconfig_update_default_layer函数代码示例发布时间：2022-05-30

C++ edp_write函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19242|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10002|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8332|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8702|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8648|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9674|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8633|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8007|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8670|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7541|2022-11-06

客服电话

电子邮件

C++ eeconfig_init函数代码示例

示例1: rgb_matrix_init

示例2: process_record_user

示例3: switch

示例4: rgblight_init

示例5: backlight_init

示例6: process_record_user

示例7: process_record_user

示例8: audio_init

示例9: eeconfig_init

示例10: process_record_user

示例11: switch

示例12: switch

示例13: process_record_user

示例14: magic

示例15: matrix_init_quantum

示例16: audio_init

示例17: rgblight_init

示例18: audio_init

示例19: switch

示例20: process_record_user

请发表评论

全部评论

上一篇：

下一篇：

Delphi 日志记录和查看

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053