本文整理汇总了C++中dup_mmap函数的典型用法代码示例。如果您正苦于以下问题：C++ dup_mmap函数的具体用法？C++ dup_mmap怎么用？C++ dup_mmap使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了dup_mmap函数的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: allocate_mm
/*
* Allocate a new mm structure and copy contents from the
* mm structure of the passed in task structure.
*/
static struct mm_struct *dup_mm(struct task_struct *tsk)
{
struct mm_struct *mm, *oldmm = current->mm;
int err;
mm = allocate_mm();
if (!mm)
goto fail_nomem;
memcpy(mm, oldmm, sizeof(*mm));
if (!mm_init(mm, tsk))
goto fail_nomem;
err = dup_mmap(mm, oldmm);
if (err)
goto free_pt;
mm->hiwater_rss = get_mm_rss(mm);
mm->hiwater_vm = mm->total_vm;
if (mm->binfmt && !try_module_get(mm->binfmt->module))
goto free_pt;
return mm;
free_pt:
/* don't put binfmt in mmput, we haven't got module yet */
mm->binfmt = NULL;
mmput(mm);
fail_nomem:
return NULL;
}
开发者ID:19Dan01，项目名称:linux，代码行数:38，代码来源:fork.c
示例2: allocate_mm
struct mm_struct *dup_mm(struct task_struct *tsk)
{
struct mm_struct *mm, *oldmm = current->mm;
int err;
if (!oldmm)
return NULL;
mm = allocate_mm();
if (!mm)
goto fail_nomem;
memcpy(mm, oldmm, sizeof(*mm));
mm_init_cpumask(mm);
mm->token_priority = 0;
mm->last_interval = 0;
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
mm->pmd_huge_pte = NULL;
#endif
if (!mm_init(mm, tsk))
goto fail_nomem;
if (init_new_context(tsk, mm))
goto fail_nocontext;
dup_mm_exe_file(oldmm, mm);
err = dup_mmap(mm, oldmm);
if (err)
goto free_pt;
mm->hiwater_rss = get_mm_rss(mm);
mm->hiwater_vm = mm->total_vm;
if (mm->binfmt && !try_module_get(mm->binfmt->module))
goto free_pt;
return mm;
free_pt:
mm->binfmt = NULL;
mmput(mm);
fail_nomem:
return NULL;
fail_nocontext:
mm_free_pgd(mm);
free_mm(mm);
return NULL;
}
开发者ID:Yannicked，项目名称:htc-m7，代码行数:56，代码来源:fork.c
示例3: copy_mm
// copy_mm - process "proc" duplicate OR share process "current"'s mm according clone_flags
// - if clone_flags & CLONE_VM, then "share" ; else "duplicate"
static int
copy_mm(uint32_t clone_flags, struct proc_struct *proc) {
struct mm_struct *mm, *oldmm = current->mm;
/* current is a kernel thread */
if (oldmm == NULL) {
return 0;
}
if (clone_flags & CLONE_VM) {
mm = oldmm;
goto good_mm;
}
int ret = -E_NO_MEM;
if ((mm = mm_create()) == NULL) {
goto bad_mm;
}
if (setup_pgdir(mm) != 0) {
goto bad_pgdir_cleanup_mm;
}
lock_mm(oldmm);
{
ret = dup_mmap(mm, oldmm);
}
unlock_mm(oldmm);
if (ret != 0) {
goto bad_dup_cleanup_mmap;
}
good_mm:
if (mm != oldmm) {
mm->brk_start = oldmm->brk_start;
mm->brk = oldmm->brk;
bool intr_flag;
local_intr_save(intr_flag);
{
list_add(&(proc_mm_list), &(mm->proc_mm_link));
}
local_intr_restore(intr_flag);
}
mm_count_inc(mm);
proc->mm = mm;
set_pgdir (proc, mm->pgdir);
return 0;
bad_dup_cleanup_mmap:
exit_mmap(mm);
put_pgdir(mm);
bad_pgdir_cleanup_mm:
mm_destroy(mm);
bad_mm:
return ret;
}
开发者ID:chyyuu，项目名称:ucore-arch-arm，代码行数:56，代码来源:proc.c
示例4: allocate_mm
/*
* Allocate a new mm structure and copy contents from the
* mm structure of the passed in task structure.
*/
static struct mm_struct *dup_mm(struct task_struct *tsk)
{
struct mm_struct *mm, *oldmm = current->mm;
int err;
if (!oldmm)
return NULL;
mm = allocate_mm();
if (!mm)
goto fail_nomem;
memcpy(mm, oldmm, sizeof(*mm));
if (!mm_init(mm))
goto fail_nomem;
if (init_new_context(tsk, mm))
goto fail_nocontext;
err = dup_mmap(mm, oldmm);
if (err)
goto free_pt;
mm->hiwater_rss = get_mm_rss(mm);
mm->hiwater_vm = mm->total_vm;
return mm;
free_pt:
mmput(mm);
fail_nomem:
return NULL;
fail_nocontext:
/*
* If init_new_context() failed, we cannot use mmput() to free the mm
* because it calls destroy_context()
*/
mm_free_pgd(mm);
free_mm(mm);
return NULL;
}
开发者ID:FatSunHYS，项目名称:OSCourseDesign，代码行数:48，代码来源:fork.c
示例5: copy_mm
static int copy_mm(unsigned long clone_flags, struct task_struct * tsk)
{
struct mm_struct * mm, *oldmm;
int retval;
tsk->min_flt = tsk->maj_flt = 0;
tsk->nvcsw = tsk->nivcsw = 0;
tsk->mm = NULL;
tsk->active_mm = NULL;
/*
* Are we cloning a kernel thread?
*
* We need to steal a active VM for that..
*/
oldmm = current->mm;
if (!oldmm)
return 0;
if (clone_flags & CLONE_VM) {
atomic_inc(&oldmm->mm_users);
mm = oldmm;
/*
* There are cases where the PTL is held to ensure no
* new threads start up in user mode using an mm, which
* allows optimizing out ipis; the tlb_gather_mmu code
* is an example.
*/
spin_unlock_wait(&oldmm->page_table_lock);
goto good_mm;
}
retval = -ENOMEM;
mm = allocate_mm();
if (!mm)
goto fail_nomem;
/* Copy the current MM stuff.. */
memcpy(mm, oldmm, sizeof(*mm));
if (!mm_init(mm))
goto fail_nomem;
if (init_new_context(tsk,mm))
goto fail_nocontext;
retval = dup_mmap(mm, oldmm);
if (retval)
goto free_pt;
mm->hiwater_rss = mm->rss;
mm->hiwater_vm = mm->total_vm;
good_mm:
tsk->mm = mm;
tsk->active_mm = mm;
return 0;
free_pt:
mmput(mm);
fail_nomem:
return retval;
fail_nocontext:
/*
* If init_new_context() failed, we cannot use mmput() to free the mm
* because it calls destroy_context()
*/
mm_free_pgd(mm);
free_mm(mm);
return retval;
}
开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:72，代码来源:fork.c
示例6: check_mm_swap
//.........这里部分代码省略.........
assert(ret == 0);
for (i = 0, addr1 = addr0; i < 4; i ++, addr1 += PGSIZE) {
*(char *)addr1 = (char)0xFF;
}
exit_mmap(mm0);
for (i = 0; i < PDX(KERNBASE); i ++) {
assert(pgdir[i] == 0);
}
cprintf("check_mm_swap: step3, exit_mmap ok.\n");
// step4: check dup_mmap
for (i = 0; i < max_swap_offset; i ++) {
assert(mem_map[i] == SWAP_UNUSED);
}
ret = mm_map(mm0, addr0, PTSIZE, vm_flags, NULL);
assert(ret != 0);
addr1 = addr0;
for (i = 0; i < 4; i ++, addr1 += PGSIZE) {
*(char *)addr1 = (char)(i * i);
}
ret = 0;
ret += swap_out_mm(mm0, 10);
ret += swap_out_mm(mm0, 10);
assert(ret == 4);
for (; i < 8; i ++, addr1 += PGSIZE) {
*(char *)addr1 = (char)(i * i);
}
// setup mm1
mm1 = mm_create();
assert(mm1 != NULL);
page = alloc_page();
assert(page != NULL);
pgdir = page2kva(page);
memcpy(pgdir, boot_pgdir, PGSIZE);
pgdir[PDX(VPT)] = PADDR(pgdir) | PTE_P | PTE_W;
mm1->pgdir = pgdir;
ret = dup_mmap(mm1, mm0);
assert(ret == 0);
// switch to mm1
check_mm_struct = mm1;
lcr3(PADDR(mm1->pgdir));
addr1 = addr0;
for (i = 0; i < 8; i ++, addr1 += PGSIZE) {
assert(*(char *)addr1 == (char)(i * i));
*(char *)addr1 = (char)0x88;
}
// switch to mm0
check_mm_struct = mm0;
lcr3(PADDR(mm0->pgdir));
addr1 = addr0;
for (i = 0; i < 8; i ++, addr1 += PGSIZE) {
assert(*(char *)addr1 == (char)(i * i));
}
// switch to boot_cr3
check_mm_struct = NULL;
lcr3(boot_cr3);
// free memory
exit_mmap(mm0);
exit_mmap(mm1);
free_page(kva2page(mm0->pgdir));
mm_destroy(mm0);
free_page(kva2page(mm1->pgdir));
mm_destroy(mm1);
cprintf("check_mm_swap: step4, dup_mmap ok.\n");
refill_inactive_scan();
page_launder();
for (i = 0; i < max_swap_offset; i ++) {
assert(mem_map[i] == SWAP_UNUSED);
}
assert(nr_free_pages_store == nr_free_pages());
assert(slab_allocated_store == slab_allocated());
cprintf("check_mm_swap() succeeded.\n");
}
开发者ID:jefjin，项目名称:ucore，代码行数:101，代码来源:swap.c
示例7: check_mm_shm_swap
//.........这里部分代码省略.........
}
for (i = 0; i < 4; i ++) {
assert(*(char *)(addr1 + i * PGSIZE) == (char)(- i * i));
}
// check swap
ret = swap_out_mm(mm0, 8) + swap_out_mm(mm0, 8);
assert(ret == 8 && nr_active_pages == 4 && nr_inactive_pages == 0);
refill_inactive_scan();
assert(nr_active_pages == 0 && nr_inactive_pages == 4);
// write & read again
memset((void *)addr0, 0x77, PGSIZE);
for (i = 0; i < PGSIZE; i ++) {
assert(*(char *)(addr1 + i) == (char)0x77);
}
// check unmap
ret = mm_unmap(mm0, addr1, PGSIZE * 4);
assert(ret == 0);
addr0 += 4 * PGSIZE, addr1 += 4 * PGSIZE;
*(char *)(addr0) = (char)(0xDC);
assert(*(char *)(addr1) == (char)(0xDC));
*(char *)(addr1 + PTSIZE) = (char)(0xDC);
assert(*(char *)(addr0 + PTSIZE) == (char)(0xDC));
cprintf("check_mm_shm_swap: step1, share memory ok.\n");
// setup mm1
mm1 = mm_create();
assert(mm1 != NULL);
page = alloc_page();
assert(page != NULL);
pgdir = page2kva(page);
memcpy(pgdir, boot_pgdir, PGSIZE);
pgdir[PDX(VPT)] = PADDR(pgdir) | PTE_P | PTE_W;
mm1->pgdir = pgdir;
ret = dup_mmap(mm1, mm0);
assert(ret == 0 && shmem_ref(shmem) == 4);
// switch to mm1
check_mm_struct = mm1;
lcr3(PADDR(mm1->pgdir));
for (i = 0; i < 4; i ++) {
*(char *)(addr0 + i * PGSIZE) = (char)(0x57 + i);
}
for (i = 0; i < 4; i ++) {
assert(*(char *)(addr1 + i * PGSIZE) == (char)(0x57 + i));
}
check_mm_struct = mm0;
lcr3(PADDR(mm0->pgdir));
for (i = 0; i < 4; i ++) {
assert(*(char *)(addr0 + i * PGSIZE) == (char)(0x57 + i));
assert(*(char *)(addr1 + i * PGSIZE) == (char)(0x57 + i));
}
swap_out_mm(mm1, 4);
exit_mmap(mm1);
free_page(kva2page(mm1->pgdir));
mm_destroy(mm1);
assert(shmem_ref(shmem) == 2);
cprintf("check_mm_shm_swap: step2, dup_mmap ok.\n");
// free memory
check_mm_struct = NULL;
lcr3(boot_cr3);
exit_mmap(mm0);
free_page(kva2page(mm0->pgdir));
mm_destroy(mm0);
refill_inactive_scan();
page_launder();
for (i = 0; i < max_swap_offset; i ++) {
assert(mem_map[i] == SWAP_UNUSED);
}
assert(nr_free_pages_store == nr_free_pages());
assert(slab_allocated_store == slab_allocated());
cprintf("check_mm_shm_swap() succeeded.\n");
}
开发者ID:jefjin，项目名称:ucore，代码行数:101，代码来源:swap.c
示例8: allocate_mm
/*
* Allocate a new mm structure and copy contents from the
* mm structure of the passed in task structure.
*/
struct mm_struct *dup_mm(struct task_struct *tsk)
{
struct mm_struct *mm, *oldmm = current->mm;
int err;
if (!oldmm)
return NULL;
mm = allocate_mm();
if (!mm)
goto fail_nomem;
memcpy(mm, oldmm, sizeof(*mm));
mm_init_cpumask(mm);
/* Initializing for Swap token stuff */
mm->token_priority = 0;
mm->last_interval = 0;
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
mm->pmd_huge_pte = NULL;
#endif
uprobe_reset_state(mm);
if (!mm_init(mm, tsk))
goto fail_nomem;
if (init_new_context(tsk, mm))
goto fail_nocontext;
dup_mm_exe_file(oldmm, mm);
err = dup_mmap(mm, oldmm);
if (err)
goto free_pt;
#ifdef CONFIG_HOMECACHE
{
/* Reset vm_pid on all vmas. In the new mm_struct, we
* want to switch anything that was associated with
* the parent to be associated with the child, and
* clear everything else.
*/
struct vm_area_struct *mpnt;
down_write_nested(&mm->mmap_sem, SINGLE_DEPTH_NESTING);
for (mpnt = mm->mmap; mpnt; mpnt = mpnt->vm_next) {
if (mpnt->vm_pid == current->pid)
mpnt->vm_pid = tsk->pid;
else
mpnt->vm_pid = 0;
}
up_write(&mm->mmap_sem);
}
#endif
mm->hiwater_rss = get_mm_rss(mm);
mm->hiwater_vm = mm->total_vm;
if (mm->binfmt && !try_module_get(mm->binfmt->module))
goto free_pt;
return mm;
free_pt:
/* don't put binfmt in mmput, we haven't got module yet */
mm->binfmt = NULL;
mmput(mm);
fail_nomem:
return NULL;
fail_nocontext:
/*
* If init_new_context() failed, we cannot use mmput() to free the mm
* because it calls destroy_context()
*/
mm_free_pgd(mm);
free_mm(mm);
return NULL;
}
开发者ID:tcreech，项目名称:tilegx-linux-3.4.68-politestackrehome，代码行数:84，代码来源:fork.c
注：本文中的dup_mmap函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论