• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ duRGBA函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中duRGBA函数的典型用法代码示例。如果您正苦于以下问题：C++ duRGBA函数的具体用法？C++ duRGBA怎么用？C++ duRGBA使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了duRGBA函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: duDebugDrawTriMeshSlope

void duDebugDrawTriMeshSlope(duDebugDraw* dd, const float* verts, int /*nverts*/,
							 const int* tris, const float* normals, int ntris,
							 const float walkableSlopeAngle)
{
	if (!dd) return;
	if (!verts) return;
	if (!tris) return;
	if (!normals) return;
	
	const float walkableThr = cosf(walkableSlopeAngle/180.0f*(float)M_PI);

	dd->begin(DU_DRAW_TRIS);
	for (int i = 0; i < ntris*3; i += 3)
	{
		const float* norm = &normals[i];
		unsigned int color;
		unsigned char a = (unsigned char)(255*(2+normals[i+0]+normals[i+1])/4);
		if (norm[1] < walkableThr)
			color = duRGBA(a,a/4,a/16,255);
		else
			color = duRGBA(a,a,a,255);
		
		dd->vertex(&verts[tris[i+0]*3], color);
		dd->vertex(&verts[tris[i+1]*3], color);
		dd->vertex(&verts[tris[i+2]*3], color);
	}
	dd->end();
}
开发者ID:randomcoding，项目名称:PlaneShift-PSAI，代码行数:28，代码来源:RecastDebugDraw.cpp


示例2: bind

	void bind()
	{
		if (m_texId == 0)
		{
			// Create checker pattern.
			const unsigned int col0 = duRGBA(215,215,215,255);
			const unsigned int col1 = duRGBA(255,255,255,255);
			static const int TSIZE = 64;
			unsigned int data[TSIZE*TSIZE];
			
			glGenTextures(1, &m_texId);
			glBindTexture(GL_TEXTURE_2D, m_texId);

			int level = 0;
			int size = TSIZE;
			while (size > 0)
			{
				for (int y = 0; y < size; ++y)
					for (int x = 0; x < size; ++x)
						data[x+y*size] = (x==0 || y==0) ? col0 : col1;
				glTexImage2D(GL_TEXTURE_2D, level, GL_RGBA, size,size, 0, GL_RGBA, GL_UNSIGNED_BYTE, data);
				size /= 2;
				level++;
			}
			
			glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_NEAREST);
			glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
		}
		else
		{
			glBindTexture(GL_TEXTURE_2D, m_texId);
		}
	}
开发者ID:SteerSuite，项目名称:Release，代码行数:33，代码来源:SampleInterfaces.cpp


示例3: duDebugDrawTriMesh

void duDebugDrawTriMesh(duDebugDraw* dd, const float* verts, int /*nverts*/,
						const int* tris, const float* normals, int ntris,
						const unsigned char* flags)
{
	if (!dd) return;
	if (!verts) return;
	if (!tris) return;
	if (!normals) return;

	dd->begin(DU_DRAW_TRIS);
	for (int i = 0; i < ntris*3; i += 3)
	{
		unsigned int color;
		unsigned char a = (unsigned char)(150*(2+normals[i+0]+normals[i+1])/4);
		if (flags && !flags[i/3])
			color = duRGBA(a,a/4,a/16,255);
		else
			color = duRGBA(a,a,a,255);
			
		dd->vertex(&verts[tris[i+0]*3], color);
		dd->vertex(&verts[tris[i+1]*3], color);
		dd->vertex(&verts[tris[i+2]*3], color);
	}
	dd->end();
}
开发者ID:randomcoding，项目名称:PlaneShift-PSAI，代码行数:25，代码来源:RecastDebugDraw.cpp


示例4: duDebugDrawHeightfieldSolid

void duDebugDrawHeightfieldSolid(duDebugDraw* dd, const rcHeightfield& hf)
{
	if (!dd) return;

	const float* orig = hf.bmin;
	const float cs = hf.cs;
	const float ch = hf.ch;
	
	const int w = hf.width;
	const int h = hf.height;
		
	unsigned int fcol[6];
	duCalcBoxColors(fcol, duRGBA(255,255,255,255), duRGBA(255,255,255,255));
	
	dd->begin(DU_DRAW_QUADS);
	
	for (int y = 0; y < h; ++y)
	{
		for (int x = 0; x < w; ++x)
		{
			float fx = orig[0] + x*cs;
			float fz = orig[2] + y*cs;
			const rcSpan* s = hf.spans[x + y*w];
			while (s)
			{
				duAppendBox(dd, fx, orig[1]+s->smin*ch, fz, fx+cs, orig[1] + s->smax*ch, fz+cs, fcol);
				s = s->next;
			}
		}
	}
	dd->end();
}
开发者ID:educharlie，项目名称:HNA-Algorithm，代码行数:32，代码来源:RecastDebugDraw.cpp


示例5: duRGBA

void RecastMapRenderer::DrawAgents(duDebugDraw* dd)
{
	for (int i = 0; i < m_RecastMap->GetCrowd()->getAgentCount(); ++i)
	{
		const dtCrowdAgent* ag = m_RecastMap->GetCrowd()->getAgent(i);
		if (!ag->active) continue;
		
		const float height = ag->params.height;
		const float radius = ag->params.radius;
		const float* pos = ag->npos;
		
		unsigned int col = duRGBA(220,220,220,128);
		if (ag->targetState == DT_CROWDAGENT_TARGET_REQUESTING || ag->targetState == DT_CROWDAGENT_TARGET_WAITING_FOR_QUEUE)
			col = duLerpCol(col, duRGBA(128,0,255,128), 32);
		else if (ag->targetState == DT_CROWDAGENT_TARGET_WAITING_FOR_PATH)
			col = duLerpCol(col, duRGBA(128,0,255,128), 128);
		else if (ag->targetState == DT_CROWDAGENT_TARGET_FAILED)
			col = duRGBA(255,32,16,128);
		else if (ag->targetState == DT_CROWDAGENT_TARGET_VELOCITY)
			col = duLerpCol(col, duRGBA(64,255,0,128), 128);
		
		duDebugDrawCylinder(dd, pos[0]-radius, pos[1]+radius*0.1f, pos[2]-radius,
							pos[0]+radius, pos[1]+height, pos[2]+radius, col);
	}
}
开发者ID:ngoaho91，项目名称:BambooOF，代码行数:25，代码来源:RecastMapRenderer.cpp


示例6: duRGBA

void cocos2d::NavMesh::drawOffMeshConnections()
{
    unsigned int conColor = duRGBA(192, 0, 128, 192);
    unsigned int baseColor = duRGBA(0, 0, 0, 64);
    _debugDraw.begin(DU_DRAW_LINES, 2.0f);
    for (int i = 0; i < _geomData->offMeshConCount; ++i)
    {
        float* v = &_geomData->offMeshConVerts[i * 3 * 2];

        _debugDraw.vertex(v[0], v[1], v[2], baseColor);
        _debugDraw.vertex(v[0], v[1] + 0.2f, v[2], baseColor);

        _debugDraw.vertex(v[3], v[4], v[5], baseColor);
        _debugDraw.vertex(v[3], v[4] + 0.2f, v[5], baseColor);

        duAppendCircle(&_debugDraw, v[0], v[1] + 0.1f, v[2], _geomData->offMeshConRads[i], baseColor);
        duAppendCircle(&_debugDraw, v[3], v[4] + 0.1f, v[5], _geomData->offMeshConRads[i], baseColor);

        if (/*hilight*/true)
        {
            duAppendArc(&_debugDraw, v[0], v[1], v[2], v[3], v[4], v[5], 0.25f,
                (_geomData->offMeshConDirs[i] & 1) ? 0.6f : 0.0f, 0.6f, conColor);
        }
    }
    _debugDraw.end();
}
开发者ID:RyunosukeOno，项目名称:rayjack，代码行数:26，代码来源:CCNavMesh.cpp


示例7: duRGBA

void InputGeom::drawOffMeshConnections(duDebugDraw* dd, bool hilight)
{
	unsigned int conColor = duRGBA(192,0,128,192);
	unsigned int baseColor = duRGBA(0,0,0,64);
	dd->depthMask(false);

	dd->begin(DU_DRAW_LINES, 2.0f);
	for (int i = 0; i < m_offMeshConCount; ++i)
	{
		float* v = &m_offMeshConVerts[i*3*2];

		dd->vertex(v[0],v[1],v[2], baseColor);
		dd->vertex(v[0],v[1]+0.2f,v[2], baseColor);
		
		dd->vertex(v[3],v[4],v[5], baseColor);
		dd->vertex(v[3],v[4]+0.2f,v[5], baseColor);
		
		duAppendCircle(dd, v[0],v[1]+0.1f,v[2], m_offMeshConRads[i], baseColor);
		duAppendCircle(dd, v[3],v[4]+0.1f,v[5], m_offMeshConRads[i], baseColor);

		if (hilight)
		{
			duAppendArc(dd, v[0],v[1],v[2], v[3],v[4],v[5], 0.25f,
						(m_offMeshConDirs[i]&1) ? 0.6f : 0.0f, 0.6f, conColor);
		}
	}	
	dd->end();

	dd->depthMask(true);
}
开发者ID:randomcoding，项目名称:PlaneShift-PSAI，代码行数:30，代码来源:InputGeom.cpp


示例8: duDebugDrawTriMeshSlope

void duDebugDrawTriMeshSlope(duDebugDraw* dd, const float* verts, int /*nverts*/,
							 const int* tris, const float* normals, int ntris,
							 const float walkableSlopeAngle, const float texScale)
{
	if (!dd) return;
	if (!verts) return;
	if (!tris) return;
	if (!normals) return;
	
	const float walkableThr = cosf(walkableSlopeAngle/180.0f*DU_PI);
	
	float uva[2];
	float uvb[2];
	float uvc[2];
	
	dd->texture(true);

	const unsigned int unwalkable = duRGBA(192,128,0,255);
	
	dd->begin(DU_DRAW_TRIS);
	for (int i = 0; i < ntris*3; i += 3)
	{
		const float* norm = &normals[i];
		unsigned int color;
		unsigned char a = (unsigned char)(220*(2+norm[0]+norm[1])/4);
		if (norm[1] < walkableThr)
			color = duLerpCol(duRGBA(a,a,a,255), unwalkable, 64);
		else
			color = duRGBA(a,a,a,255);
		
		const float* va = &verts[tris[i+0]*3];
		const float* vb = &verts[tris[i+1]*3];
		const float* vc = &verts[tris[i+2]*3];
		
		int ax = 0, ay = 0;
		if (rcAbs(norm[1]) > rcAbs(norm[ax]))
			ax = 1;
		if (rcAbs(norm[2]) > rcAbs(norm[ax]))
			ax = 2;
		ax = (1<<ax)&3; // +1 mod 3
		ay = (1<<ax)&3; // +1 mod 3
		
		uva[0] = va[ax]*texScale;
		uva[1] = va[ay]*texScale;
		uvb[0] = vb[ax]*texScale;
		uvb[1] = vb[ay]*texScale;
		uvc[0] = vc[ax]*texScale;
		uvc[1] = vc[ay]*texScale;
		
		dd->vertex(va, color, uva);
		dd->vertex(vb, color, uvb);
		dd->vertex(vc, color, uvc);
	}
	dd->end();

	dd->texture(false);
}
开发者ID:educharlie，项目名称:HNA-Algorithm，代码行数:57，代码来源:RecastDebugDraw.cpp


示例9: duDebugDrawHeightfieldLayer

void duDebugDrawHeightfieldLayer(duDebugDraw* dd, const struct rcHeightfieldLayer& layer, const int idx)
{
	const float cs = layer.cs;
	const float ch = layer.ch;
	const int w = layer.width;
	const int h = layer.height;
	
	unsigned int color = duIntToCol(idx+1, 255);
	
	// Layer bounds
	float bmin[3], bmax[3];
	bmin[0] = layer.bmin[0] + layer.minx*cs;
	bmin[1] = layer.bmin[1];
	bmin[2] = layer.bmin[2] + layer.miny*cs;
	bmax[0] = layer.bmin[0] + (layer.maxx+1)*cs;
	bmax[1] = layer.bmax[1];
	bmax[2] = layer.bmin[2] + (layer.maxy+1)*cs;
	duDebugDrawBoxWire(dd, bmin[0],bmin[1],bmin[2], bmax[0],bmax[1],bmax[2], duTransCol(color,128), 2.0f);
	
	// Layer height
	dd->begin(DU_DRAW_QUADS);
	for (int y = 0; y < h; ++y)
	{
		for (int x = 0; x < w; ++x)
		{
			const int lidx = x+y*w;
			const int lh = (int)layer.heights[lidx];
			if (h == 0xff) continue;
			const unsigned char area = layer.areas[lidx];
			
			unsigned int col;
			if (area == RC_WALKABLE_AREA)
				col = duLerpCol(color, duRGBA(0,192,255,64), 32);
			else if (area == RC_NULL_AREA)
				col = duLerpCol(color, duRGBA(0,0,0,64), 32);
			else
				col = duLerpCol(color, duIntToCol(area, 255), 32);
			
			const float fx = layer.bmin[0] + x*cs;
			const float fy = layer.bmin[1] + (lh+1)*ch;
			const float fz = layer.bmin[2] + y*cs;
			
			dd->vertex(fx, fy, fz, col);
			dd->vertex(fx, fy, fz+cs, col);
			dd->vertex(fx+cs, fy, fz+cs, col);
			dd->vertex(fx+cs, fy, fz, col);
		}
	}
	dd->end();
	
	// Portals
	drawLayerPortals(dd, &layer);
}
开发者ID:educharlie，项目名称:HNA-Algorithm，代码行数:53，代码来源:RecastDebugDraw.cpp


示例10: drawGraphBackground

void Visualization::renderDebugInfoOverlay()
{
    GraphParams gp;
    gp.setRect(10, 10, 500, 200, 8);
    gp.setValueRange(0.0f, 2.0f, 4, "ms");
    
    drawGraphBackground(&gp);
    drawGraph(&gp, &m_debugInfo->m_crowdTotalTime, 1, "Crowd update", duRGBA(255,128,0,255));
    
    gp.setRect(10, 10, 500, 200, 8);
    gp.setValueRange(0.0f, 2000.0f, 1, "");
    drawGraph(&gp, &m_debugInfo->m_crowdSampleCount, 0, "Sample Count", duRGBA(96,96,96,128));
}
开发者ID:Conglang，项目名称:recastdetour，代码行数:13，代码来源:Visualization.cpp


示例11: rcMin

void ConvexVolumeTool::handleRender()
{
	DebugDrawGL dd;
	
	// Find height extents of the shape.
	float minh = FLT_MAX, maxh = 0;
	for (int i = 0; i < m_npts; ++i)
		minh = rcMin(minh, m_pts[i*3+1]);
	minh -= m_boxDescent;
	maxh = minh + m_boxHeight;

	dd.begin(DU_DRAW_POINTS, 4.0f);
	for (int i = 0; i < m_npts; ++i)
	{
		unsigned int col = duRGBA(255,255,255,255);
		if (i == m_npts-1)
			col = duRGBA(240,32,16,255);
		dd.vertex(m_pts[i*3+0],m_pts[i*3+1]+0.1f,m_pts[i*3+2], col);
	}
	dd.end();

	dd.begin(DU_DRAW_LINES, 2.0f);
	for (int i = 0, j = m_nhull-1; i < m_nhull; j = i++)
	{
		const float* vi = &m_pts[m_hull[j]*3];
		const float* vj = &m_pts[m_hull[i]*3];
		dd.vertex(vj[0],minh,vj[2], duRGBA(255,255,255,64));
		dd.vertex(vi[0],minh,vi[2], duRGBA(255,255,255,64));
		dd.vertex(vj[0],maxh,vj[2], duRGBA(255,255,255,64));
		dd.vertex(vi[0],maxh,vi[2], duRGBA(255,255,255,64));
		dd.vertex(vj[0],minh,vj[2], duRGBA(255,255,255,64));
		dd.vertex(vj[0],maxh,vj[2], duRGBA(255,255,255,64));
	}
	dd.end();	
}
开发者ID:0jpq0，项目名称:server，代码行数:35，代码来源:ConvexVolumeTool.cpp


示例12: glDepthFunc

void RecastMapRenderer::Render()
{
	if (!m_RecastMap->GetGeometry() || !m_RecastMap->GetGeometry()->getMesh())
		return;
	// ========================================== setup
	glDepthFunc(GL_LESS);
	glDepthMask(GL_TRUE);
	DebugDrawGL dd;
	const float texScale = 1.0f / (RECAST_CELL_SIZE * 10.0f);
	duDebugDrawTriMeshSlope(&dd, 
		m_RecastMap->GetGeometry()->getMesh()->getVerts(), 
		m_RecastMap->GetGeometry()->getMesh()->getVertCount(),
		m_RecastMap->GetGeometry()->getMesh()->getTris(), 
		m_RecastMap->GetGeometry()->getMesh()->getNormals(), 
		m_RecastMap->GetGeometry()->getMesh()->getTriCount(),
		RECAST_AGENT_MAX_SLOPE, 
		texScale);
	
	DrawAgents(&dd);
	
	glDepthMask(GL_FALSE);
	// Draw bounds
	const float* bmin = m_RecastMap->GetGeometry()->getMeshBoundsMin();
	const float* bmax = m_RecastMap->GetGeometry()->getMeshBoundsMax();
	duDebugDrawBoxWire(&dd, bmin[0],bmin[1],bmin[2], bmax[0],bmax[1],bmax[2], duRGBA(255,255,255,128), 1.0f);
	
	// Tiling grid.
	int gw = 0, gh = 0;
	rcCalcGridSize(bmin, bmax, RECAST_CELL_SIZE, &gw, &gh);
	const int tw = (gw + RECAST_TILE_SIZE - 1) / RECAST_TILE_SIZE;
	const int th = (gh + RECAST_TILE_SIZE - 1) / RECAST_TILE_SIZE;
	const float s = RECAST_TILE_SIZE*RECAST_CELL_SIZE;
	duDebugDrawGridXZ(&dd, bmin[0],bmin[1],bmin[2], tw,th, s, duRGBA(0,0,0,64), 1.0f);

	if(m_RecastMap->GetMesh() && m_RecastMap->GetQuery())
	{
		duDebugDrawNavMesh(&dd, *(m_RecastMap->GetMesh()), 
			DU_DRAWNAVMESH_COLOR_TILES|DU_DRAWNAVMESH_CLOSEDLIST|DU_DRAWNAVMESH_OFFMESHCONS);
		duDebugDrawNavMeshPolysWithFlags(&dd, *(m_RecastMap->GetMesh()), POLY_ABILITY_DISABLED, duRGBA(0,0,0,128));
	}
	if (m_RecastMap->GetTileCache())
		//DrawTiles(&dd, m_RecastMap->GetTileCache());
	
	if (m_RecastMap->GetTileCache())
		DrawObstacles(&dd, m_RecastMap->GetTileCache());

	if (m_RecastMap->GetGeometry())
		DrawConvexVolumes(&dd, m_RecastMap->GetGeometry());
}
开发者ID:ngoaho91，项目名称:BambooOF，代码行数:49，代码来源:RecastMapRenderer.cpp


示例13: duRGBA

void Sample_TileMesh::buildTile(const float* pos)
{
	if (!m_geom) return;
	if (!m_navMesh) return;
		
	const float* bmin = m_geom->getMeshBoundsMin();
	const float* bmax = m_geom->getMeshBoundsMax();
	
	const float ts = m_tileSize*m_cellSize;
	const int tx = (int)((pos[0] - bmin[0]) / ts);
	const int ty = (int)((pos[2] - bmin[2]) / ts);
	
	m_tileBmin[0] = bmin[0] + tx*ts;
	m_tileBmin[1] = bmin[1];
	m_tileBmin[2] = bmin[2] + ty*ts;
	
	m_tileBmax[0] = bmin[0] + (tx+1)*ts;
	m_tileBmax[1] = bmax[1];
	m_tileBmax[2] = bmin[2] + (ty+1)*ts;
	
	m_tileCol = duRGBA(77,204,0,255);
	
	int dataSize = 0;
	unsigned char* data = buildTileMesh(tx, ty, m_tileBmin, m_tileBmax, dataSize);
	
	if (data)
	{
		// Remove any previous data (navmesh owns and deletes the data).
		m_navMesh->removeTile(m_navMesh->getTileRefAt(tx,ty),0,0);
		
		// Let the navmesh own the data.
		if (!m_navMesh->addTile(data,dataSize,DT_TILE_FREE_DATA))
			dtFree(data);
	}
}
开发者ID:Denominator13，项目名称:NeoCore，代码行数:35，代码来源:Sample_TileMesh.cpp


示例14: m_keepInterResults

Sample_TileMesh::Sample_TileMesh() :
	m_keepInterResults(false),
	m_buildAll(true),
	m_totalBuildTimeMs(0),
	m_triareas(0),
	m_solid(0),
	m_chf(0),
	m_cset(0),
	m_pmesh(0),
	m_dmesh(0),
	m_drawMode(DRAWMODE_NAVMESH),
	m_maxTiles(0),
	m_maxPolysPerTile(0),
	m_tileSize(32),
	m_tileCol(duRGBA(0,0,0,32)),
	m_tileBuildTime(0),
	m_tileMemUsage(0),
	m_tileTriCount(0)
{
	resetCommonSettings();
	memset(m_lastBuiltTileBmin, 0, sizeof(m_lastBuiltTileBmin));
	memset(m_lastBuiltTileBmax, 0, sizeof(m_lastBuiltTileBmax));
	
	setTool(new NavMeshTileTool);
}
开发者ID:ArtStealer，项目名称:recastnavigation，代码行数:25，代码来源:Sample_TileMesh.cpp


示例15: duIntToCol

unsigned int duIntToCol(int i, int a)
{
    int r = bit(i, 1) + bit(i, 3) * 2 + 1;
    int g = bit(i, 2) + bit(i, 4) * 2 + 1;
    int b = bit(i, 0) + bit(i, 5) * 2 + 1;
    return duRGBA(r*63,g*63,b*63,a);
}
开发者ID:wtfcolt，项目名称:MadMangos，代码行数:7，代码来源:DebugDraw.cpp


示例16: m_drawMode

CMaNGOS_Map::CMaNGOS_Map() :
m_drawMode(DRAWMODE_NAVMESH),
m_navMeshDrawFlags(DU_DRAWNAVMESH_OFFMESHCONS | DU_DRAWNAVMESH_COLOR_TILES),
m_maxTiles(0),
m_maxPolysPerTile(0),
m_tileSize(32),
m_tileCol(duRGBA(11, 243, 229, 200)),
m_tileBuildTime(0),
m_tileMemUsage(0),
m_tileTriCount(0),
m_isBuilded(false),
m_bigBaseUnit(false),
m_mapID(0),
m_showLevelOld(false),
m_DrawVMapMesh(true),
m_DrawMapMesh(true),
m_showLevel(SHOW_LEVEL_NONE),
m_GeomChanged(false),
m_tool(NULL),
m_SelectedTile(NULL)
{
    for (int i = 0; i < MAX_TOOLS; i++)
        m_toolStates[i] = NULL;

    for (int i = 0; i < 3; i++)
        m_LastClick[i] = 0.0f;
}
开发者ID:Ghaster，项目名称:mangos-classic，代码行数:27，代码来源:CMaNGOS_Map.cpp


示例17: imguiDrawText

void CrowdTool::handleRenderOverlay(double* proj, double* model, int* view)
{
	GLdouble x, y, z;
	
	// Draw start and end point labels
	if (m_targetRef && gluProject((GLdouble)m_targetPos[0], (GLdouble)m_targetPos[1], (GLdouble)m_targetPos[2],
								model, proj, view, &x, &y, &z))
	{
		imguiDrawText((int)x, (int)(y+25), IMGUI_ALIGN_CENTER, "TARGET", imguiRGBA(0,0,0,220));
	}
	
	if (m_showLabels)
	{
		char label[32];
		for (int i = 0; i < m_crowd.getAgentCount(); ++i)
		{
			const Agent* ag = m_crowd.getAgent(i);
			if (!ag->active) continue;
			const float* pos = ag->npos;
			const float h = ag->height;
			if (gluProject((GLdouble)pos[0], (GLdouble)pos[1]+h, (GLdouble)pos[2],
						   model, proj, view, &x, &y, &z))
			{
				snprintf(label, 32, "%d", i);
				imguiDrawText((int)x, (int)y+15, IMGUI_ALIGN_CENTER, label, imguiRGBA(0,0,0,220));
			}
			
		}
	}
	
	if (m_showPerfGraph)
	{
		GraphParams gp;
		gp.setRect(300, 10, 500, 200, 8);
		gp.setValueRange(0.0f, 2.0f, 4, "ms");

		drawGraphBackground(&gp);
		drawGraph(&gp, &m_crowdRvoTime, 0, "RVO Sampling", duRGBA(255,0,128,255));
		drawGraph(&gp, &m_crowdTotalTime, 1, "Total", duRGBA(128,255,0,255));
		
		gp.setRect(300, 10, 500, 50, 8);
		gp.setValueRange(0.0f, 2000.0f, 1, "0");
		drawGraph(&gp, &m_crowdSampleCount, 0, "Sample Count", duRGBA(255,255,255,255));
	}
}
开发者ID:0jpq0，项目名称:server，代码行数:45，代码来源:CrowdTool.cpp


示例18: getWorldBox

void NavPath::renderSimple(ObjectRenderInst *ri, SceneRenderState *state, BaseMatInstance *overrideMat)
{
   if(overrideMat)
      return;

   if(state->isReflectPass() || !(isSelected() || mAlwaysRender))
      return;

   GFXDrawUtil *drawer = GFX->getDrawUtil();
   GFXStateBlockDesc desc;
   desc.setZReadWrite(true, false);
   desc.setBlend(true);
   desc.setCullMode(GFXCullNone);

   if(isSelected())
   {
      drawer->drawCube(desc, getWorldBox(), ColorI(136, 255, 228, 5));
      desc.setFillModeWireframe();
      drawer->drawCube(desc, getWorldBox(), ColorI::BLACK);
   }

   desc.setZReadWrite(!mXray, false);

   ColorI pathColour(255, 0, 255);

   if(!mIsLooping)
   {
      desc.setFillModeSolid();
      if(mFromSet) drawer->drawCube(desc, Point3F(0.2f, 0.2f, 0.2f), mFrom, pathColour);
      if(mToSet)   drawer->drawCube(desc, Point3F(0.2f, 0.2f, 0.2f), mTo, pathColour);
   }

   GFXStateBlockRef sb = GFX->createStateBlock(desc);
   GFX->setStateBlock(sb);

   PrimBuild::color3i(pathColour.red, pathColour.green, pathColour.blue);

   PrimBuild::begin(GFXLineStrip, mPoints.size());
   for (U32 i = 0; i < mPoints.size(); i++)
      PrimBuild::vertex3fv(mPoints[i]);
   PrimBuild::end();

   if(mRenderSearch && getServerObject())
   {
      NavPath *np = static_cast<NavPath*>(getServerObject());
      if(np->mQuery && !dtStatusSucceed(np->mStatus))
      {
         duDebugDrawTorque dd;
         dd.overrideColor(duRGBA(250, 20, 20, 255));
         duDebugDrawNavMeshNodes(&dd, *np->mQuery);
         dd.render();
      }
   }
}
开发者ID:Dwarf-King，项目名称:OmniEngine.Net，代码行数:54，代码来源:navPath.cpp


示例19: duDebugDrawCross

void OffMeshConnectionTool::handleRender()
{
	DebugDrawGL dd;
	const float s = m_sample->getAgentRadius();
	
	if (m_hitPosSet)
		duDebugDrawCross(&dd, m_hitPos[0],m_hitPos[1]+0.1f,m_hitPos[2], s, duRGBA(0,0,0,128), 2.0f);

	InputGeom* geom = m_sample->getInputGeom();
	if (geom)
		geom->drawOffMeshConnections(&dd, true);
}
开发者ID:0jpq0，项目名称:server，代码行数:12，代码来源:OffMeshConnectionTool.cpp


示例20: duDebugDrawHeightfieldWalkable

void duDebugDrawHeightfieldWalkable(duDebugDraw* dd, const rcHeightfield& hf)
{
	if (!dd) return;

	const float* orig = hf.bmin;
	const float cs = hf.cs;
	const float ch = hf.ch;
	
	const int w = hf.width;
	const int h = hf.height;
	
	unsigned int fcol[6];
	duCalcBoxColors(fcol, duRGBA(255,255,255,255), duRGBA(217,217,217,255));

	dd->begin(DU_DRAW_QUADS);
	
	for (int y = 0; y < h; ++y)
	{
		for (int x = 0; x < w; ++x)
		{
			float fx = orig[0] + x*cs;
			float fz = orig[2] + y*cs;
			const rcSpan* s = hf.spans[x + y*w];
			while (s)
			{
				if (s->area == RC_WALKABLE_AREA)
					fcol[0] = duRGBA(64,128,160,255);
				else if (s->area == RC_NULL_AREA)
					fcol[0] = duRGBA(64,64,64,255);
				else
					fcol[0] = duMultCol(duIntToCol(s->area, 255), 200);
				
				duAppendBox(dd, fx, orig[1]+s->smin*ch, fz, fx+cs, orig[1] + s->smax*ch, fz+cs, fcol);
				s = s->next;
			}
		}
	}
	
	dd->end();
}
开发者ID:educharlie，项目名称:HNA-Algorithm，代码行数:40，代码来源:RecastDebugDraw.cpp



注：本文中的duRGBA函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ dub_checkint函数代码示例发布时间：2022-05-30
下一篇：
C++ dtxoff函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap