本文整理汇总了C++中drm_kms_helper_poll_enable函数的典型用法代码示例。如果您正苦于以下问题：C++ drm_kms_helper_poll_enable函数的具体用法？C++ drm_kms_helper_poll_enable怎么用？C++ drm_kms_helper_poll_enable使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了drm_kms_helper_poll_enable函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: fsl_dcu_drm_pm_suspend
static int fsl_dcu_drm_pm_suspend(struct device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
if (!fsl_dev)
return 0;
disable_irq(fsl_dev->irq);
drm_kms_helper_poll_disable(fsl_dev->drm);
console_lock();
drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 1);
console_unlock();
fsl_dev->state = drm_atomic_helper_suspend(fsl_dev->drm);
if (IS_ERR(fsl_dev->state)) {
console_lock();
drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
console_unlock();
drm_kms_helper_poll_enable(fsl_dev->drm);
enable_irq(fsl_dev->irq);
return PTR_ERR(fsl_dev->state);
}
clk_disable_unprepare(fsl_dev->pix_clk);
clk_disable_unprepare(fsl_dev->clk);
return 0;
}
开发者ID:AshishNamdev，项目名称:linux，代码行数:30，代码来源:fsl_dcu_drm_drv.c
示例2: i915_resume
int i915_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
#ifndef __NetBSD__ /* pmf handles this for us. */
if (pci_enable_device(dev->pdev))
return -EIO;
#endif
pci_set_master(dev->pdev);
intel_gt_reset(dev);
/*
* Platforms with opregion should have sane BIOS, older ones (gen3 and
* earlier) need this since the BIOS might clear all our scratch PTEs.
*/
if (drm_core_check_feature(dev, DRIVER_MODESET) &&
!dev_priv->opregion.header) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
ret = __i915_drm_thaw(dev);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
开发者ID:eyberg，项目名称:rumpkernel-netbsd-src，代码行数:35，代码来源:i915_drv.c
示例3: fsl_dcu_drm_pm_resume
static int fsl_dcu_drm_pm_resume(struct device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
int ret;
if (!fsl_dev)
return 0;
ret = clk_prepare_enable(fsl_dev->clk);
if (ret < 0) {
dev_err(dev, "failed to enable dcu clk\n");
return ret;
}
if (fsl_dev->tcon)
fsl_tcon_bypass_enable(fsl_dev->tcon);
fsl_dcu_drm_init_planes(fsl_dev->drm);
drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
console_lock();
drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
console_unlock();
drm_kms_helper_poll_enable(fsl_dev->drm);
enable_irq(fsl_dev->irq);
return 0;
}
开发者ID:AshishNamdev，项目名称:linux，代码行数:28，代码来源:fsl_dcu_drm_drv.c
示例4: fsl_dcu_drm_pm_resume
static int fsl_dcu_drm_pm_resume(struct device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
int ret;
if (!fsl_dev)
return 0;
ret = clk_enable(fsl_dev->clk);
if (ret < 0) {
dev_err(dev, "failed to enable dcu clk\n");
clk_unprepare(fsl_dev->clk);
return ret;
}
ret = clk_prepare(fsl_dev->clk);
if (ret < 0) {
dev_err(dev, "failed to prepare dcu clk\n");
return ret;
}
drm_kms_helper_poll_enable(fsl_dev->drm);
regcache_cache_only(fsl_dev->regmap, false);
regcache_sync(fsl_dev->regmap);
return 0;
}
开发者ID:BigeyeDestroyer，项目名称:linux，代码行数:26，代码来源:fsl_dcu_drm_drv.c
示例5: i915_resume
int i915_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
if (pci_enable_device(dev->pdev))
return -EIO;
pci_set_master(dev->pdev);
#ifdef CONFIG_I915_VGT
if (i915_host_mediate) {
int error = vgt_resume(dev->pdev);
if (error)
return error;
}
#endif
/*
* Platforms with opregion should have sane BIOS, older ones (gen3 and
* earlier) need to restore the GTT mappings since the BIOS might clear
* all our scratch PTEs.
*/
ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
开发者ID:Truefans，项目名称:KVMGT-kernel，代码行数:33，代码来源:i915_drv.c
示例6: omap_drm_resume
static int omap_drm_resume(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
drm_kms_helper_poll_enable(drm_dev);
return omap_gem_resume(dev);
}
开发者ID:ninjablocks，项目名称:kernel-VAR-SOM-AMxx，代码行数:8，代码来源:omap_drv.c
示例7: udl_usb_resume
static int udl_usb_resume(struct usb_interface *interface)
{
struct drm_device *dev = usb_get_intfdata(interface);
drm_kms_helper_poll_enable(dev);
udl_modeset_restore(dev);
return 0;
}
开发者ID:avagin，项目名称:linux，代码行数:8，代码来源:udl_drv.c
示例8: xylon_drm_pm_resume
static int __maybe_unused xylon_drm_pm_resume(struct device *dev)
{
struct xylon_drm_device *xdev = dev_get_drvdata(dev);
drm_helper_connector_dpms(xdev->connector, DRM_MODE_DPMS_ON);
drm_kms_helper_poll_enable(xdev->dev);
return 0;
}
开发者ID:TE-HiroakiYamazoe，项目名称:linux-xlnx，代码行数:9，代码来源:xylon_drv.c
示例9: rcar_du_pm_resume
static int rcar_du_pm_resume(struct device *dev)
{
struct rcar_du_device *rcdu = dev_get_drvdata(dev);
drm_atomic_helper_resume(rcdu->ddev, rcdu->suspend_state);
drm_fbdev_cma_set_suspend_unlocked(rcdu->fbdev, false);
drm_kms_helper_poll_enable(rcdu->ddev);
return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:10，代码来源:rcar_du_drv.c
示例10: drv_resume
static __maybe_unused int drv_resume(struct device *dev)
{
struct drm_device *ddev = dev_get_drvdata(dev);
struct ltdc_device *ldev = ddev->dev_private;
ltdc_resume(ddev);
drm_atomic_helper_resume(ddev, ldev->suspend_state);
drm_kms_helper_poll_enable(ddev);
return 0;
}
开发者ID:avagin，项目名称:linux，代码行数:11，代码来源:drv.c
示例11: shmob_drm_pm_resume
static int shmob_drm_pm_resume(struct device *dev)
{
struct shmob_drm_device *sdev = dev_get_drvdata(dev);
drm_modeset_lock_all(sdev->ddev);
shmob_drm_crtc_resume(&sdev->crtc);
drm_modeset_unlock_all(sdev->ddev);
drm_kms_helper_poll_enable(sdev->ddev);
return 0;
}
开发者ID:03199618，项目名称:linux，代码行数:11，代码来源:shmob_drm_drv.c
示例12: shmob_drm_pm_resume
static int shmob_drm_pm_resume(struct device *dev)
{
struct shmob_drm_device *sdev = dev_get_drvdata(dev);
mutex_lock(&sdev->ddev->mode_config.mutex);
shmob_drm_crtc_resume(&sdev->crtc);
mutex_unlock(&sdev->ddev->mode_config.mutex);
drm_kms_helper_poll_enable(sdev->ddev);
return 0;
}
开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:11，代码来源:shmob_drm_drv.c
示例13: omap_drm_resume
static int omap_drm_resume(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
drm_modeset_lock_all(drm_dev);
omap_drm_resume_all_displays();
drm_modeset_unlock_all(drm_dev);
drm_kms_helper_poll_enable(drm_dev);
return omap_gem_resume(drm_dev);
}
开发者ID:ReneNyffenegger，项目名称:linux，代码行数:12，代码来源:omap_drv.c
示例14: bochs_pm_resume
static int bochs_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
struct bochs_device *bochs = drm_dev->dev_private;
drm_helper_resume_force_mode(drm_dev);
drm_fb_helper_set_suspend_unlocked(&bochs->fb.helper, 0);
drm_kms_helper_poll_enable(drm_dev);
return 0;
}
开发者ID:akhandual，项目名称:linux，代码行数:13，代码来源:bochs_drv.c
示例15: ast_drm_resume
static int ast_drm_resume(struct drm_device *dev)
{
int ret;
if (pci_enable_device(dev->pdev))
return -EIO;
ret = ast_drm_thaw(dev);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
开发者ID:513855417，项目名称:linux，代码行数:14，代码来源:ast_drv.c
示例16: hdlcd_pm_resume
static int __maybe_unused hdlcd_pm_resume(struct device *dev)
{
struct drm_device *drm = dev_get_drvdata(dev);
struct hdlcd_drm_private *hdlcd = drm ? drm->dev_private : NULL;
if (!hdlcd)
return 0;
drm_atomic_helper_resume(drm, hdlcd->state);
drm_fbdev_cma_set_suspend_unlocked(hdlcd->fbdev, 0);
drm_kms_helper_poll_enable(drm);
return 0;
}
开发者ID:JamesChenFromChina，项目名称:linux，代码行数:14，代码来源:hdlcd_drv.c
示例17: hdlcd_pm_resume
static int __maybe_unused hdlcd_pm_resume(struct device *dev)
{
struct drm_device *drm = dev_get_drvdata(dev);
struct hdlcd_drm_private *hdlcd = drm ? drm->dev_private : NULL;
if (!hdlcd)
return 0;
drm_atomic_helper_resume(drm, hdlcd->state);
drm_kms_helper_poll_enable(drm);
pm_runtime_set_active(dev);
return 0;
}
开发者ID:acton393，项目名称:linux，代码行数:14，代码来源:hdlcd_drv.c
示例18: nouveau_switcheroo_set_state
static void nouveau_switcheroo_set_state(struct pci_dev *pdev,
enum vga_switcheroo_state state)
{
struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
printk(KERN_ERR "VGA switcheroo: switched nouveau on\n");
nouveau_pci_resume(pdev);
drm_kms_helper_poll_enable(dev);
} else {
printk(KERN_ERR "VGA switcheroo: switched nouveau off\n");
drm_kms_helper_poll_disable(dev);
nouveau_pci_suspend(pdev, pmm);
}
}
开发者ID:EvanZheng，项目名称:linux-2.6，代码行数:15，代码来源:nouveau_state.c
示例19: i915_resume
int i915_resume(struct drm_device *dev)
{
int ret;
if (pci_enable_device(dev->pdev))
return -EIO;
pci_set_master(dev->pdev);
ret = i915_drm_thaw(dev);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
开发者ID:Stefan-Schmidt，项目名称:linux-2.6，代码行数:16，代码来源:i915_drv.c
示例20: i915_resume
int i915_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
/*
* Platforms with opregion should have sane BIOS, older ones (gen3 and
* earlier) need to restore the GTT mappings since the BIOS might clear
* all our scratch PTEs.
*/
ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
开发者ID:AkyZero，项目名称:wrapfs-latest，代码行数:17，代码来源:i915_drv.c
注：本文中的drm_kms_helper_poll_enable函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论