本文整理汇总了C++中dma_wrreg函数的典型用法代码示例。如果您正苦于以下问题：C++ dma_wrreg函数的具体用法？C++ dma_wrreg怎么用？C++ dma_wrreg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了dma_wrreg函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: s3c2410_dma_dostop
static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
{
unsigned long tmp;
unsigned long flags;
pr_debug("%s:\n", __FUNCTION__);
dbg_showchan(chan);
local_irq_save(flags);
s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP);
tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
tmp |= S3C2410_DMASKTRIG_STOP;
dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
#if 0
/* should also clear interrupts, according to WinCE BSP */
tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
tmp |= S3C2410_DCON_NORELOAD;
dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
#endif
chan->state = S3C2410_DMA_IDLE;
chan->load_state = S3C2410_DMALOAD_NONE;
local_irq_restore(flags);
return 0;
}
开发者ID:Dronevery，项目名称:JetsonTK1-kernel，代码行数:31，代码来源:dma.c
示例2: s3c2410_dma_dostop
static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
{
unsigned long flags;
unsigned long tmp;
pr_debug("%s:\n", __func__);
dbg_showchan(chan);
local_irq_save(flags);
s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP);
tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
tmp |= S3C2410_DMASKTRIG_STOP;
//tmp &= ~S3C2410_DMASKTRIG_ON;
dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
#if 0
/* should also clear interrupts, according to WinCE BSP */
tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
tmp |= S3C2410_DCON_NORELOAD;
dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
#endif
/* should stop do this, or should we wait for flush? */
chan->state = S3C2410_DMA_IDLE;
chan->load_state = S3C2410_DMALOAD_NONE;
local_irq_restore(flags);
return 0;
}
开发者ID:antonywcl，项目名称:AR-5315u_PLD，代码行数:33，代码来源:dma.c
示例3: s3c_dma_loadbuffer
/* s3c_dma_loadbuffer
*
* load a buffer, and update the channel state
*/
static inline int s3c_dma_loadbuffer(struct s3c2410_dma_chan *chan,
struct s3c_dma_buf *buf)
{
unsigned long reload;
pr_debug("s3c_chan_loadbuffer: loading buffer %p (0x%08lx,0x%06x)\n",
buf, (unsigned long) buf->data, buf->size);
if (buf == NULL) {
dmawarn("buffer is NULL\n");
return -EINVAL;
}
/* check the state of the channel before we do anything */
if (chan->load_state == S3C_DMALOAD_1LOADED) {
dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
}
if (chan->load_state == S3C_DMALOAD_1LOADED_1RUNNING) {
dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
reload = S3C2410_DCON_AUTORELOAD;
}
writel(buf->data, chan->addr_reg);
pr_debug("%s: DMA control0 - %08x\n", __FUNCTION__, chan->dcon);
pr_debug("%s: DMA control1 - %08x\n", __FUNCTION__, (buf->size / chan->xfer_unit));
dma_wrreg(chan, S3C_DMAC_CxCONTROL0, chan->dcon);
dma_wrreg(chan, S3C_DMAC_CxCONTROL1, (buf->size / chan->xfer_unit));
chan->next = buf->next;
/* update the state of the channel */
switch (chan->load_state) {
case S3C_DMALOAD_NONE:
chan->load_state = S3C_DMALOAD_1LOADED;
break;
case S3C_DMALOAD_1RUNNING:
chan->load_state = S3C_DMALOAD_1LOADED_1RUNNING;
break;
default:
dmawarn("dmaload: unknown state %d in loadbuffer\n", chan->load_state);
break;
}
return 0;
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:57，代码来源:dma-pl080.c
示例4: s3c_clear_interrupts
void s3c_clear_interrupts (int dcon_num, int channel)
{
unsigned long tmp;
s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num];
tmp = dma_rdreg(dma_controller, S3C_DMAC_INT_TCCLEAR);
tmp |= (1 << channel);
dma_wrreg(dma_controller, S3C_DMAC_INT_TCCLEAR, tmp);
tmp = dma_rdreg(dma_controller, S3C_DMAC_INT_ERRORCLEAR);
tmp |= (1 << channel);
dma_wrreg(dma_controller, S3C_DMAC_INT_ERRORCLEAR, tmp);
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:13，代码来源:dma-pl080.c
示例5: s3c_dma_dostop
static int s3c_dma_dostop(struct s3c2410_dma_chan *chan)
{
unsigned long tmp;
unsigned long flags;
pr_debug("%s: DMA Channel No : %d\n", __FUNCTION__, chan->number);
dbg_showchan(chan);
local_irq_save(flags);
s3c_dma_flush_fifo(chan);
s3c_dma_call_op(chan, S3C2410_DMAOP_STOP);
tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION);
tmp &= ~S3C_DMACONFIG_CHANNEL_ENABLE;
dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, tmp);
pr_debug("%s: S3C_DMAC_CxCONFIGURATION : %08x\n", __FUNCTION__, tmp);
chan->state = S3C_DMA_IDLE;
chan->load_state = S3C_DMALOAD_NONE;
local_irq_restore(flags);
return 0;
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:29，代码来源:dma-pl080.c
示例6: s3c2410_dma_lastxfer
static inline void
s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan)
{
pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
chan->number, chan->load_state);
switch (chan->load_state) {
case S3C2410_DMALOAD_NONE:
break;
case S3C2410_DMALOAD_1LOADED:
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
/* flag error? */
printk(KERN_ERR "dma%d: timeout waiting for load\n",
chan->number);
return;
}
break;
default:
pr_debug("dma%d: lastxfer: unhandled load_state %d with no next",
chan->number, chan->load_state);
return;
}
/* hopefully this'll shut the damned thing up after the transfer... */
dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
}
开发者ID:Dronevery，项目名称:JetsonTK1-kernel，代码行数:29，代码来源:dma.c
示例7: s3c_dma_dostop
static int s3c_dma_dostop(struct s3c2410_dma_chan *chan)
{
unsigned long tmp;
unsigned long flags;
pr_debug("%s: DMA Channel No : %d\n", __FUNCTION__, chan->number);
dbg_showchan(chan);
local_irq_save(flags);
//Commenting out this function call(as its causing freeze) and even without this it adheres to
//ARM Primecell 080's disabling a DMA channel and losing data in the FIFO method
//s3c_dma_flush_fifo(chan);
s3c_dma_call_op(chan, S3C2410_DMAOP_STOP);
tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION);
tmp &= ~S3C_DMACONFIG_CHANNEL_ENABLE;
dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, tmp);
pr_debug("%s: S3C_DMAC_CxCONFIGURATION : %08x\n", __FUNCTION__, tmp);
chan->state = S3C_DMA_IDLE;
chan->load_state = S3C_DMALOAD_NONE;
local_irq_restore(flags);
return 0;
}
开发者ID:antibyte，项目名称:Samdroid-Turbo-Kernel，代码行数:31，代码来源:dma-pl080.c
示例8: s3c2410_dma_lastxfer
static inline void
s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
{
switch (chan->load_state) {
case S3C2410_DMALOAD_NONE:
break;
case S3C2410_DMALOAD_1LOADED:
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
/* flag error? */
printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
chan->number, __func__);
return;
}
break;
case S3C2410_DMALOAD_1LOADED_1RUNNING:
/* I belive in this case we do not have anything to do
* until the next buffer comes along, and we turn off the
* reload */
return;
default:
pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
chan->number, chan->load_state);
return;
}
/* hopefully this'll shut the damned thing up after the transfer... */
dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
}
开发者ID:1703011，项目名称:asuswrt-merlin，代码行数:33，代码来源:dma.c
示例9: s3c_disable_dmac
void s3c_disable_dmac(unsigned int dcon_num)
{
unsigned long tmp;
s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num];
tmp = dma_rdreg(dma_controller, S3C_DMAC_CONFIGURATION);
tmp &= ~S3C_DMA_CONTROLLER_ENABLE;
dma_wrreg(dma_controller, S3C_DMAC_CONFIGURATION, tmp);
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:8，代码来源:dma-pl080.c
示例10: dma_test
void dma_test (int dcon_num, int channel)
{
int tmp;
s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num];
dma_wrreg(dma_controller, S3C_DMAC_CONFIGURATION, S3C_DMA_CONTROLLER_ENABLE);
tmp = dma_rdreg(dma_controller, S3C_DMAC_CONFIGURATION);
printk("reg val %d\n", tmp);
dma_wrreg(dma_controller, S3C_DMAC_CCONFIGURATION(channel), 0x01);
tmp = dma_rdreg(dma_controller, S3C_DMAC_CCONFIGURATION(channel));
printk("reg conf %x\n", tmp);
dma_wrreg(dma_controller, S3C_DMAC_CCONTROL0(channel), 0x8ff02064);
tmp = dma_rdreg(dma_controller, S3C_DMAC_CCONTROL0(channel));
printk("reg ctrl %x\n", tmp);
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:18，代码来源:dma-pl080.c
示例11: s3c2410_dma_flush
static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
{
struct s3c2410_dma_buf *buf, *next;
unsigned long flags;
pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
dbg_showchan(chan);
local_irq_save(flags);
if (chan->state != S3C2410_DMA_IDLE) {
pr_debug("%s: stopping channel...\n", __func__ );
s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
}
buf = chan->curr;
if (buf == NULL)
buf = chan->next;
chan->curr = chan->next = chan->end = NULL;
if (buf != NULL) {
for ( ; buf != NULL; buf = next) {
next = buf->next;
pr_debug("%s: free buffer %p, next %p\n",
__func__, buf, buf->next);
s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
s3c2410_dma_freebuf(buf);
}
}
dbg_showregs(chan);
s3c2410_dma_waitforstop(chan);
#if 0
/* should also clear interrupts, according to WinCE BSP */
{
unsigned long tmp;
tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
tmp |= S3C2410_DCON_NORELOAD;
dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
}
#endif
dbg_showregs(chan);
local_irq_restore(flags);
return 0;
}
开发者ID:antonywcl，项目名称:AR-5315u_PLD，代码行数:55，代码来源:dma.c
示例12: s3c_dma_start
/* s3c_dma_start
*
* start a dma channel going
*/
static int s3c_dma_start(struct s3c2410_dma_chan *chan)
{
unsigned long flags;
pr_debug("s3c_start_dma: channel number=%d, index=%d\n", chan->number, chan->index);
local_irq_save(flags);
if (chan->state == S3C_DMA_RUNNING) {
pr_debug("s3c_start_dma: already running (%d)\n", chan->state);
local_irq_restore(flags);
return 0;
}
chan->state = S3C_DMA_RUNNING;
/* check wether there is anything to load, and if not, see
* if we can find anything to load
*/
if (chan->load_state == S3C_DMALOAD_NONE) {
if (chan->next == NULL) {
printk(KERN_ERR "dma%d: dcon_num has nothing loaded\n", chan->number);
chan->state = S3C_DMA_IDLE;
local_irq_restore(flags);
return -EINVAL;
}
s3c_dma_loadbuffer(chan, chan->next);
}
dbg_showchan(chan);
/* enable the channel */
if (!chan->irq_enabled) {
enable_irq(chan->irq);
chan->irq_enabled = 1;
}
/* Get the DMA channel started ...*/
dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, chan->config_flags);
pr_debug("%s:wrote %08lx to S3C_DMAC_CxCONFIGURATION.\n",__FUNCTION__, chan->config_flags);
/* Start the DMA operation on Peripheral */
s3c_dma_call_op(chan, S3C2410_DMAOP_START);
dbg_showchan(chan);
local_irq_restore(flags);
return 0;
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:57，代码来源:dma-pl080.c
示例13: s3c_dma_flush_fifo
/*actively polling for the A bit can block the cpu*/
void s3c_dma_flush_fifo(struct s3c2410_dma_chan *chan)
{
unsigned long tmp;
tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION);
tmp |= S3C_DMACONFIG_HALT;
dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, tmp);
tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION);
/*this while loop can be very dangerous..may be put the process to sleep rather than waiting till fifo is drained */
while (tmp & S3C_DMACONFIG_ACTIVE) {
tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION);
}
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:16，代码来源:dma-pl080.c
示例14: s3c2410_dma_devconfig
int s3c2410_dma_devconfig(int channel,
enum s3c2410_dmasrc source,
int hwcfg,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
__func__, (int)source, hwcfg, devaddr);
chan->source = source;
chan->dev_addr = devaddr;
chan->hw_cfg = hwcfg;
switch (source) {
case S3C2410_DMASRC_HW:
/* source is hardware */
pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);
dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr);
dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
break;
case S3C2410_DMASRC_MEM:
/* source is memory */
pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);
dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr);
dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
break;
default:
printk(KERN_ERR "dma%d: invalid source type (%d)\n",
channel, source);
return -EINVAL;
}
if (dma_sel.direction != NULL)
(dma_sel.direction)(chan, chan->map, source);
return 0;
}
开发者ID:antonywcl，项目名称:AR-5315u_PLD，代码行数:52，代码来源:dma.c
示例15: s3c2410_dma_devconfig
int s3c2410_dma_devconfig(int channel,
s3c2410_dmasrc_t source,
int hwcfg,
unsigned long devaddr)
{
s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
check_channel(channel);
pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
__FUNCTION__, (int)source, hwcfg, devaddr);
chan->source = source;
chan->dev_addr = devaddr;
switch (source) {
case S3C2410_DMASRC_HW:
/* source is hardware */
pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
__FUNCTION__, devaddr, hwcfg);
dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr);
dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
return 0;
case S3C2410_DMASRC_MEM:
/* source is memory */
pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
__FUNCTION__, devaddr, hwcfg);
dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr);
dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
return 0;
}
printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
return -EINVAL;
}
开发者ID:Dronevery，项目名称:JetsonTK1-kernel，代码行数:42，代码来源:dma.c
示例16: s3c_dma_irq
//.........这里部分代码省略.........
* ready after we've called back the owner. This should
* ensure we do not wait around too long for the DMA
* engine to start the next transfer
*/
chan->load_state = S3C_DMALOAD_1LOADED;
break;
case S3C_DMALOAD_NONE:
printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
chan->number);
break;
default:
printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
chan->number, chan->load_state);
break;
}
if (buf != NULL) {
/* update the chain to make sure that if we load any more
* buffers when we call the callback function, things should
* work properly */
chan->curr = buf->next;
buf->next = NULL;
if (buf->magic != BUF_MAGIC) {
printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
chan->number, __FUNCTION__, buf);
goto next_channel;
}
s3c_dma_buffdone(chan, buf, S3C2410_RES_OK);
/* free resouces */
s3c_dma_freebuf(buf);
} else {
}
if (chan->next != NULL) {
unsigned long flags;
switch (chan->load_state) {
case S3C_DMALOAD_1RUNNING:
/* don't need to do anything for this state */
break;
case S3C_DMALOAD_NONE:
/* can load buffer immediately */
break;
case S3C_DMALOAD_1LOADED:
if (s3c_dma_waitforload(chan, __LINE__) == 0) {
/* flag error? */
printk(KERN_ERR "dma%d: timeout waiting for load\n",
chan->number);
goto next_channel;
}
break;
case S3C_DMALOAD_1LOADED_1RUNNING:
goto next_channel;
default:
printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
chan->number, chan->load_state);
goto next_channel;
}
local_irq_save(flags);
s3c_dma_loadbuffer(chan, chan->next);
//shaju added for dbg
dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, chan->config_flags);
local_irq_restore(flags);
} else {
s3c_dma_lastxfer(chan);
/* see if we can stop this channel.. */
if (chan->load_state == S3C_DMALOAD_NONE) {
pr_debug("# DMA CH %d(index:%d): end of transfer, stopping channel (%ld)\n",
chan->number, chan->index, jiffies);
s3c2410_dma_ctrl(chan->index | DMACH_LOW_LEVEL, S3C2410_DMAOP_STOP);
}
}
s3c_clear_interrupts(chan->dma_con->number, chan->number);
}
next_channel:
tmp >>= 1;
}
return IRQ_HANDLED;
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:101，代码来源:dma-pl080.c
示例17: s3c2410_dma_irq
//.........这里部分代码省略.........
printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
chan->number);
break;
default:
printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
chan->number, chan->load_state);
break;
}
if (buf != NULL) {
/* update the chain to make sure that if we load any more
* buffers when we call the callback function, things should
* work properly */
chan->curr = buf->next;
buf->next = NULL;
if (buf->magic != BUF_MAGIC) {
printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
chan->number, __func__, buf);
return IRQ_HANDLED;
}
s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
/* free resouces */
s3c2410_dma_freebuf(buf);
} else {
}
/* only reload if the channel is still running... our buffer done
* routine may have altered the state by requesting the dma channel
* to stop or shutdown... */
/* todo: check that when the channel is shut-down from inside this
* function, we cope with unsetting reload, etc */
if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
unsigned long flags;
unsigned long tmp;
switch (chan->load_state) {
case S3C2410_DMALOAD_1RUNNING:
/* don't need to do anything for this state */
break;
case S3C2410_DMALOAD_NONE:
/* can load buffer immediately */
break;
case S3C2410_DMALOAD_1LOADED:
/* printk(KERN_INFO "DMA: 1 LOADED\n"); */
//if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
// /* flag error? */
// printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
// chan->number, __func__);
// return IRQ_HANDLED;
//}
break;
case S3C2410_DMALOAD_1LOADED_1RUNNING:
goto no_load;
default:
printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
chan->number, chan->load_state);
return IRQ_HANDLED;
}
/*
* Since we are not using the auto-reload feature, we must restart
* the DMA-channel at this point
* (Luis Galdos)
*/
local_irq_save(flags);
chan->load_state = S3C2410_DMALOAD_NONE;
s3c2410_dma_loadbuffer(chan, chan->curr);
tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
tmp &= ~S3C2410_DMASKTRIG_STOP;
tmp |= S3C2410_DMASKTRIG_ON;
dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
local_irq_restore(flags);
} else {
s3c2410_dma_lastxfer(chan);
/* see if we can stop this channel.. */
if (chan->load_state == S3C2410_DMALOAD_NONE) {
pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
chan->number, jiffies);
s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
S3C2410_DMAOP_STOP);
}
}
no_load:
return IRQ_HANDLED;
}
开发者ID:digidotcom，项目名称:yocto-linux，代码行数:101，代码来源:dma.c
示例18: s3c2410_dma_start
static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
{
unsigned long tmp;
unsigned long flags;
pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
local_irq_save(flags);
if (chan->state == S3C2410_DMA_RUNNING) {
pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
local_irq_restore(flags);
return 0;
}
chan->state = S3C2410_DMA_RUNNING;
/* check wether there is anything to load, and if not, see
* if we can find anything to load
*/
if (chan->load_state == S3C2410_DMALOAD_NONE) {
if (chan->next == NULL) {
printk(KERN_ERR "dma%d: channel has nothing loaded\n",
chan->number);
chan->state = S3C2410_DMA_IDLE;
local_irq_restore(flags);
return -EINVAL;
}
s3c2410_dma_loadbuffer(chan, chan->next);
}
dbg_showchan(chan);
/* enable the channel */
if (!chan->irq_enabled) {
enable_irq(chan->irq);
chan->irq_enabled = 1;
}
/* start the channel going */
tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
tmp &= ~S3C2410_DMASKTRIG_STOP;
tmp |= S3C2410_DMASKTRIG_ON;
dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
#if 0
/* the dma buffer loads should take care of clearing the AUTO
* reloading feature */
tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
tmp &= ~S3C2410_DCON_NORELOAD;
dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
#endif
s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
dbg_showchan(chan);
/* if we've only loaded one buffer onto the channel, then chec
* to see if we have another, and if so, try and load it so when
* the first buffer is finished, the new one will be loaded onto
* the channel */
if (chan->next != NULL) {
if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
pr_debug("%s: buff not yet loaded, no more todo\n",
__func__);
} else {
chan->load_state = S3C2410_DMALOAD_1RUNNING;
s3c2410_dma_loadbuffer(chan, chan->next);
}
} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
s3c2410_dma_loadbuffer(chan, chan->next);
}
}
local_irq_restore(flags);
return 0;
}
开发者ID:antonywcl，项目名称:AR-5315u_PLD，代码行数:89，代码来源:dma.c
示例19: s3c2410_dma_loadbuffer
static inline int
s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
struct s3c2410_dma_buf *buf)
{
unsigned long reload;
pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
buf, (unsigned long)buf->data, buf->size);
if (buf == NULL) {
dmawarn("buffer is NULL\n");
return -EINVAL;
}
/* check the state of the channel before we do anything */
if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
}
if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
}
/* it would seem sensible if we are the last buffer to not bother
* with the auto-reload bit, so that the DMA engine will not try
* and load another transfer after this one has finished...
*/
if (chan->load_state == S3C2410_DMALOAD_NONE) {
pr_debug("load_state is none, checking for noreload (next=%p)\n",
buf->next);
reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
} else {
//pr_debug("load_state is %d => autoreload\n", chan->load_state);
reload = S3C2410_DCON_AUTORELOAD;
}
if ((buf->data & 0xf0000000) != 0x30000000) {
dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
}
writel(buf->data, chan->addr_reg);
dma_wrreg(chan, S3C2410_DMA_DCON,
chan->dcon | reload | (buf->size/chan->xfer_unit));
chan->next = buf->next;
/* update the state of the channel */
switch (chan->load_state) {
case S3C2410_DMALOAD_NONE:
chan->load_state = S3C2410_DMALOAD_1LOADED;
break;
case S3C2410_DMALOAD_1RUNNING:
chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
break;
default:
dmawarn("dmaload: unknown state %d in loadbuffer\n",
chan->load_state);
break;
}
return 0;
}
开发者ID:antonywcl，项目名称:AR-5315u_PLD，代码行数:67，代码来源:dma.c
示例20: s3c_dma_loadbuffer
/* s3c_dma_loadbuffer
*
* load a buffer, and update the channel state
*/
static inline int s3c_dma_loadbuffer(struct s3c2410_dma_chan *chan,
struct s3c_dma_buf *buf)
{
unsigned long tmp;
pl330_DMA_parameters_t dma_param;
struct s3c_dma_buf *firstbuf;
int bwJump = 0;
memset(&dma_param, 0, sizeof(pl330_DMA_parameters_t));
pr_debug("s3c_chan_loadbuffer: loading buffer %p (0x%08lx,0x%06x)\n",
buf, (unsigned long) buf->data, buf->size);
if (buf == NULL) {
dmawarn("buffer is NULL\n");
return -EINVAL;
}
pr_debug("%s: DMA CCR - %08x\n", __FUNCTION__, chan->dcon);
pr_debug("%s: DMA Loop count - %08x\n", __FUNCTION__, (buf->size / chan->xfer_unit));
firstbuf = buf;
do {
dma_param.mPeriNum = chan->config_flags;
dma_param.mDirection = chan->source;
switch (dma_param.mDirection) {
case S3C2410_DMASRC_MEM: /* source is Memory : Mem-to-Peri (Write into FIFO) */
dma_param.mSrcAddr = buf->data;
dma_param.mDstAddr = chan->dev_addr;
break;
case S3C2410_DMASRC_HW: /* source is peripheral : Peri-to-Mem (Read from FIFO) */
dma_param.mSrcAddr = chan->dev_addr;
dma_param.mDstAddr = buf->data;
break;
case S3C_DMA_MEM2MEM: /* source & Destination : Mem-to-Mem */
dma_param.mSrcAddr = chan->dev_addr;
dma_param.mDstAddr = buf->data;
break;
case S3C_DMA_MEM2MEM_SET: /* source & Destination : Mem-to-Mem */
dma_param.mDirection = S3C_DMA_MEM2MEM;
dma_param.mSrcAddr = chan->dev_addr;
dma_param.mDstAddr = buf->data;
break;
case S3C_DMA_PER2PER:
default:
printk("Peripheral-to-Peripheral DMA NOT YET implemented !! \n");
return -EINVAL;
}
dma_param.mTrSize = buf->size;
dma_param.mLoop = 0;
dma_param.mControl = *(pl330_DMA_control_t *) &chan->dcon;
chan->next = buf->next;
buf = chan->next;
if(buf==NULL) {
firstbuf->next = NULL;
dma_param.mLastReq = 1;
dma_param.mIrqEnable = 1;
}
else {
dma_param.mLastReq = 0;
dma_param.mIrqEnable = 0;
}
bwJump += setup_DMA_channel(((u8 *)firstbuf->mcptr_cpu)+bwJump, dma_param, chan->number);
pr_debug("%s: DMA bwJump - %d\n", __FUNCTION__, bwJump);
}while(buf != NULL);
if(dma_param.mIrqEnable) {
tmp = dma_rdreg(chan->dma_con, S3C_DMAC_INTEN);
tmp |= (1 << chan->number);
dma_wrreg(chan->dma_con, S3C_DMAC_INTEN, tmp);
}
/* update the state of the channel */
switch (chan->load_state) {
case S3C_DMALOAD_NONE:
chan->load_state = S3C_DMALOAD_1LOADED;
break;
case S3C_DMALOAD_1RUNNING:
chan->load_state = S3C_DMALOAD_1LOADED_1RUNNING;
break;
default:
dmawarn("dmaload: unknown state %d in loadbuffer\n", chan->load_state);
//.........这里部分代码省略.........
开发者ID:illyah，项目名称:samsung_kernel_volans，代码行数:101，代码来源:dma-pl330.c
注：本文中的dma_wrreg函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论