本文整理汇总了C++中disp函数的典型用法代码示例。如果您正苦于以下问题：C++ disp函数的具体用法？C++ disp怎么用？C++ disp使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了disp函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: main
/**************主函数**************************/
void main(void)
{
disp(); //上电显示1、2、3、4
delay(1);
while(1)
{
// keya=TM1650_read();
// delay(50);
// if (keya!=0)
// {
// switch(keya) //控制数码管显示数字
// {
// case 0x44:TM1650_send(0X68,display[5]); break; //K11与DIG1
// case 0x4D:TM1650_send(0X68,display[6]); break; //K12与DIG2
// case 0x56:TM1650_send(0X68,display[7]); break; //K13与DIG3
// default: break;
// }
// }
}
}
开发者ID:mwei0321，项目名称:STCode，代码行数:21，代码来源:TM1650.c
示例2: strlen
void
myApplication::send (void)
{
cout << NL << "Enter text to write - press <ENTER> when done\n:";
myLine L;
cin >> L;
int l = strlen(L);
if (!l)
cerr << "Nothing entered." << endl;
else
{
cout << "Writing '"
<< L
<< char('\'')
<< endl;
stream() << L << NL; // Send the entered data, NL terminated
cout << "Chrs written to Myio object = " << (l + 1) << NL;
disp ();
}
}
开发者ID:wisnu88，项目名称:C-Programming-Refference，代码行数:20，代码来源:myiodemo.cpp
示例3: OPS_GetNodeDisp
int OPS_GetNodeDisp(int *nodeTag, int *sizeData, double *data)
{
Node *theNode = theDomain->getNode(*nodeTag);
if (theNode == 0) {
opserr << "OPS_GetNodeDisp - no node with tag " << *nodeTag << endln;
return -1;
}
int size = *sizeData;
const Vector &disp = theNode->getTrialDisp();
if (disp.Size() != size) {
opserr << "OPS_GetNodeDisp - crd size mismatch\n";
return -1;
}
for (int i=0; i < size; i++)
data[i] = disp(i);
return 0;
}
开发者ID:cix1，项目名称:OpenSees，代码行数:20，代码来源:elementAPI_TCL.cpp
示例4: bubblesort
void bubblesort(int list[] , int n )
{
int i = 0;
for( i = 0 ; i < n - 1 ; i++)
{
printf("pass %d \n " , i);
for(int j = 0 ; j < (n-1)-i ; j++)
{
if( list[j] > list[j+1] )
{
swap(list , j , j+1 );
disp(list , n);
}
}
printf("\n");
}
}
开发者ID:sonialamba，项目名称:testrepo，代码行数:20，代码来源:bubblesort.cpp
示例5: disp
/*!
*/
void
DispHolder::doHandleShowInfo( const rcss::rcg::ShowInfoT & show )
{
DispPtr disp( new rcss::rcg::DispInfoT );
disp->pmode_ = M_playmode;
disp->team_[0] = M_teams[0];
disp->team_[1] = M_teams[1];
disp->show_ = show;
M_disp = disp;
if ( Options::instance().bufferingMode() )
{
if ( (int)M_disp_cont.size() <= Options::instance().maxDispBuffer() )
{
M_disp_cont.push_back( disp );
}
}
}
开发者ID:edymanoloiu，项目名称:FotbalRobotic，代码行数:23，代码来源:disp_holder.cpp
示例6: main
int main()
{
int ch;
while(1)
{
printf("\nChoices:\n\t1-Insert\n\t2-Insert left\n\t3-Delete node\n\t4-Display\n\t5-Exit\nEnter your choice: ");
scanf("%d",&ch);
switch(ch)
{
case 1: ins();
break;
case 2: insl();
break;
case 3: del();
break;
case 4: disp();
break;
default:return 0;
}
}
}
开发者ID:AravindVenugopal，项目名称:CS-VTU-Lab-Manual，代码行数:21，代码来源:11_doublyLinkList.c
示例7: disp
void disp(_Node_t_* node)
{
_Node_t_* pN = node->next;
_Node_t_* pCN = NULL;
printf("{");
while (pN)
{
if ( TYPE_NUM == pN->type)
{
printf("%d,", pN->nValue);
}
else
{
pCN = pN->aValue;
disp(pCN);
}
pN = pN->next;
}
printf("},");
}
开发者ID:0x00b，项目名称:some_ccpp_question，代码行数:21，代码来源:numstr2numarray.cpp
示例8: myID
void
DOF_Group::setNodeDisp(const Vector &u)
{
if (myNode == 0) {
opserr << "DOF_Group::setNodeDisp: no associated Node\n";
return;
}
Vector &disp = *unbalance;
disp = myNode->getTrialDisp();
int i;
// get disp for my dof out of vector u
for (i=0; i<numDOF; i++) {
int loc = myID(i);
if (loc >= 0)
disp(i) = u(loc);
}
myNode->setTrialDisp(disp);
}
开发者ID:aceskpark，项目名称:osfeo，代码行数:21，代码来源:DOF_Group.cpp
示例9: main
void main()
{
uchar k;
P0=0xFF;
P2=0xFF;
while(1)
{
for(j=0;j<17;j++)
{
for(k=0;k<125;k++)
disp();
}
}
}
开发者ID:anan-cn，项目名称:MCU，代码行数:21，代码来源:smggd.c
示例10: main
void main()
{
int ch;
clrscr();
while(1)
{
printf(" 1.Creating a new node\n 2.Display nodes\n");
printf(" 3.Inserting a node before position \n");
printf(" 4.Inserting a node after position entered \n");
printf(" 5.Deleting a node on nth position \n");
printf(" 6.Deleting duplicate nodes\n 7.Exit\n");
scanf("%d",&ch);
switch(ch)
{
case 1:
create();
break;
case 2:
disp();
break;
case 3:
insonnoccurb();
break;
case 4:
insonnoccura();
break;
case 5:
delonnoccur();
break;
case 6:
delallsameoccur();
break;
case 7:
return;
}
}
}
开发者ID:AbhayGoyal，项目名称:Starters，代码行数:40，代码来源:LINKLOCC.C
示例11: listen
size_t listen(dht::DhtRunner& node, std::string chain, map_type& map)
{
std::future<size_t> token = node.listen(chain,
[&map](const std::vector<std::shared_ptr<dht::Value>>& values)
{
// For every value found...
for (const auto& value : values)
{
// Unpack then register and display it, if it's a new value.
std::string content = value->unpack<std::string>();
if(!map.count(content))
{
map.insert(std::make_pair(content, get_timestamp()));
disp(content);
}
}
// Continue lookup until no values are left.
return true;
});
if(token.wait_for(std::chrono::seconds(1)) != std::future_status::ready)
{
verbose("Warning: Could not create a listener since 1000ms.");
verbose(" Trying again for 30s...");
if(token.wait_for(std::chrono::seconds(30))
!= std::future_status::ready)
verbose("Error: Failure.");
else
verbose(" Done.");
}
auto v = token.get();
verbose("Starting listening to "
+ chain
+ " with token "
+ std::to_string(v) + ".");
return v;
}
开发者ID:Kordump，项目名称:dhtpim，代码行数:40，代码来源:tools.cpp
示例12: Run
void Run()
{
Graphics::Display disp(WIDTH, HEIGHT, TITLE);
Application application;
application.Start();
timespec ts;
current_utc_time(&ts);
long previousTime = ts.tv_nsec;
float delta = 0;
while (!disp.IsClosed())
{
current_utc_time(&ts);
long currentTime = ts.tv_nsec;
float prev_delta = delta;
delta = (float)((currentTime - previousTime)/1000000000.0);
if(delta < 0) delta = prev_delta;
Time::setDetlaTime(delta);
previousTime = currentTime;
/* Logic */
application.PreUpdate();
application.Update();
application.PostUpdate();
/* End Logic */
/* Rendering */
disp.PreUpdate();
application.PreRender();
application.Render();
application.PostRender();
disp.Update();
disp.PostUpdate();
/* End Rendering */
Input::CleanUp(); // This should be one of the last things to be called because it is a form of cleanup.
}
}
开发者ID:xslattery，项目名称:Polaris-cpp-OLD，代码行数:40，代码来源:main.cpp
示例13: keypress
int keypress(struct s3d_evt *event)
{
struct s3d_key_event *keys = (struct s3d_key_event *)event->buf;
int key=keys->keysym;
int mod=keys->modifier;
switch (key)
{
case S3DK_LEFT:
pos--;
break;
case S3DK_RIGHT:
pos++;
break;
case S3DK_UP:
aim--;
break;
case S3DK_DOWN:
aim++;
break;
case S3DK_RETURN:
savel2();
break;
case S3DK_DELETE:
del();
break;
case S3DK_INSERT:
// ins();
break;
case S3DK_c:
clr();
break;
case S3DK_SPACE:
spc();
break;
case S3DK_F8:
ll2();
break;
}
disp();
}
开发者ID:koo5，项目名称:lemon-2，代码行数:40，代码来源:fontedit.c
示例14: Muste_Edtgoto
SEXP Muste_Edtgoto(SEXP gotoparm)
{
int newfirst,newcur; // ,mousewheel;
char *gprm[5];
extern int op_goto2();
extern int disp();
char eka[256];
char toka[256];
char kolmas[256];
char neljas[256];
/*
mousewheel=muste_get_R_int(".muste$mousewheeltime");
Rprintf("\neventpeek: %d, mousewheel: %d",muste_eventpeek,mousewheel);
if (muste_eventpeek==FALSE && mousewheel!=9999) return(gotoparm);
*/
if (muste_mousewheel==FALSE || muste_no_selection) return(gotoparm);
newfirst=muste_get_R_int(".muste$edty.newfirst");
newcur=muste_get_R_int(".muste$edty.newcur");
sprintf(eka,"%d",newfirst); gprm[1]=eka;
sprintf(toka,"%d",newcur); gprm[2]=toka;
newfirst=muste_get_R_int(".muste$edtx.newfirst");
newcur=muste_get_R_int(".muste$edtx.newcur");
sprintf(kolmas,"%d",newfirst); gprm[3]=kolmas;
sprintf(neljas,"%d",newcur); gprm[4]=neljas;
op_goto2(5,gprm);
// muste_edt_dim();
disp();
return(gotoparm);
}
开发者ID:rforge，项目名称:muste，代码行数:40，代码来源:muste.c
示例15: disp
// 代价转成 视差（代价小的对应点的坐标差值为视差）
Mat StereoProcessor::cost2disparity(int imageNo)
{
Mat disp(imgSize, CV_32S);
Mat lowCost(imgSize, COST_MAP_TYPE, Scalar(std::numeric_limits<costType>::max()));
for(int d = 0; d <= dMax - dMin; d++)
{
for(size_t h = 0; h < imgSize.height; h++)
{
for(size_t w = 0; w < imgSize.width; w++)
{
if (lowCost.at<costType>(h, w) > costMaps[imageNo][d].at<costType>(h, w))//代价较小
{
lowCost.at<costType>(h, w) = costMaps[imageNo][d].at<costType>(h, w);
disp.at<int>(h, w) = d + dMin;//保存该代价对应的视差
}
}
}
}
return disp;
}
开发者ID:dyz-zju，项目名称:MVision，代码行数:23，代码来源:stereoprocessor.cpp
示例16: disp
void ModelDisp::SaveDisp(gui::Base * obj,gui::Event * event)
{
// Create the result svt...
real32 dispIni = 0.0;
bit maskIni = false;
svt::Var * result = new svt::Var(cyclops.Core());
result->Setup2D(makeDisp.Width(),makeDisp.Height());
result->Add("disp",dispIni);
result->Add("mask",maskIni);
result->Commit();
// Fill the result svt...
svt::Field<real32> disp(result,"disp");
svt::Field<bit> mask(result,"mask");
makeDisp.GetDisp(disp);
makeDisp.GetMask(mask);
// Get the filename...
str::String fn("");
if (cyclops.App().SaveFileDialog("Save Disparity Image",fn))
{
if (!fn.EndsWith(".dis")) fn << ".dis";
cstr ts = fn.ToStr();
if (!svt::Save(ts,result,true))
{
cyclops.App().MessageDialog(gui::App::MsgErr,"Error saving svt file.");
}
mem::Free(ts);
}
// Clean up...
delete result;
}
开发者ID:PeterZhouSZ，项目名称:hyperion，代码行数:38，代码来源:model_disp.cpp
示例17: main
/*************************************************************************
主函数
**************************************************************************/
void main()
{
uchar key;
Init_Com();//串口初始化
count=0;
P0=0xbf;
fmq=0;
while(1)
{
P1=0x0f;
if(P1!=0x0f)
{
delay(400);
key=getkey();
Getch(key);
delay(400);
}
disp();
if(cesi==0){{pwflag = pwcmp();if(pwflag==1){fmq=1;}}}
xianshi();
if(QX==1)
{
mbuf[count]=0; count++;
mbuf[count]=0; count++;
mbuf[count]=0; count++;
mbuf[count]=0; count++;
mbuf[count]=0; count++;
mbuf[count]=0;
xianshi();
QX=0;
count=0;
}
}
}
开发者ID:FateMouse，项目名称:MCUPapers，代码行数:41，代码来源:chengxu.c
示例18: init_graph
/* グラフの初期化 */
void init_graph(void) {
CELL *p;
CELL *q;
int i
, j
;
for( i = 0; i < MAX_SIZE; i++ ) {
p = (CELL *)malloc(sizeof(CELL));
p->no = i;
p->name = 'A' + i;
p->next_addr = NULL;
adjacent[i] = p;
}
for( i = 0; i < MAX_SIZE; i++ ) {
q = adjacent[i];
for( j = 0; graph_data[i][j] != '\0'; j++ ){
add( i, graph_data[i][j]-'A' );
}
}
disp();
}
开发者ID:yk-m，项目名称:Practical-Programming-I，代码行数:24，代码来源:pr8.c
示例19: GPU_PERF_TEST_1
GPU_PERF_TEST_1(DisparityBilateralFilter, cv::gpu::DeviceInfo)
{
cv::gpu::DeviceInfo devInfo = GetParam();
cv::gpu::setDevice(devInfo.deviceID());
cv::Mat img_host = readImage("gpu/stereobm/aloe-L.png", cv::IMREAD_GRAYSCALE);
ASSERT_FALSE(img_host.empty());
cv::Mat disp_host = readImage("gpu/stereobm/aloe-disp.png", cv::IMREAD_GRAYSCALE);
ASSERT_FALSE(disp_host.empty());
cv::gpu::DisparityBilateralFilter f(128);
cv::gpu::GpuMat img(img_host);
cv::gpu::GpuMat disp(disp_host);
cv::gpu::GpuMat dst;
f(disp, img, dst);
TEST_CYCLE()
{
f(disp, img, dst);
}
}
开发者ID:BRAINSia，项目名称:OpenCV_TruncatedSVN，代码行数:23，代码来源:perf_calib3d.cpp
示例20: rval
static Node *idxaddr(Simp *s, Node *seq, Node *idx)
{
Node *a, *t, *u, *v; /* temps */
Node *r; /* result */
Type *ty;
size_t sz;
a = rval(s, seq, NULL);
ty = exprtype(seq)->sub[0];
if (exprtype(seq)->type == Tyarray)
t = addr(s, a, ty);
else if (seq->expr.type->type == Tyslice)
t = load(addr(s, a, mktyptr(seq->line, ty)));
else
die("Can't index type %s\n", tystr(seq->expr.type));
assert(t->expr.type->type == Typtr);
u = rval(s, idx, NULL);
u = ptrsized(s, u);
sz = tysize(ty);
v = mul(u, disp(seq->line, sz));
r = add(t, v);
return r;
}
开发者ID:Zhouxiaoqing，项目名称:mc，代码行数:23，代码来源:simp.c
注：本文中的disp函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论