本文整理汇总了C++中disk_to_dev函数的典型用法代码示例。如果您正苦于以下问题：C++ disk_to_dev函数的具体用法？C++ disk_to_dev怎么用？C++ disk_to_dev使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了disk_to_dev函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: blk_register_queue
int blk_register_queue(struct gendisk *disk)
{
int ret;
struct device *dev = disk_to_dev(disk);
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return -ENXIO;
ret = blk_trace_init_sysfs(dev);
if (ret)
return ret;
ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
if (ret < 0)
return ret;
kobject_uevent(&q->kobj, KOBJ_ADD);
if (!q->request_fn)
return 0;
ret = elv_register_queue(q);
if (ret) {
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
blk_trace_remove_sysfs(disk_to_dev(disk));
return ret;
}
return 0;
}
开发者ID:710leo，项目名称:LVS，代码行数:33，代码来源:blk-sysfs.c
示例2: nbd_send_req
/* always call with the tx_lock held */
static int nbd_send_req(struct nbd_device *nbd, struct request *req)
{
int result, flags;
struct nbd_request request;
unsigned long size = blk_rq_bytes(req);
u32 type;
if (req->cmd_type == REQ_TYPE_DRV_PRIV)
type = NBD_CMD_DISC;
else if (req->cmd_flags & REQ_DISCARD)
type = NBD_CMD_TRIM;
else if (req->cmd_flags & REQ_FLUSH)
type = NBD_CMD_FLUSH;
else if (rq_data_dir(req) == WRITE)
type = NBD_CMD_WRITE;
else
type = NBD_CMD_READ;
memset(&request, 0, sizeof(request));
request.magic = htonl(NBD_REQUEST_MAGIC);
request.type = htonl(type);
if (type != NBD_CMD_FLUSH && type != NBD_CMD_DISC) {
request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
request.len = htonl(size);
}
memcpy(request.handle, &req, sizeof(req));
dev_dbg(nbd_to_dev(nbd), "request %p: sending control (%[email protected]%llu,%uB)\n",
req, nbdcmd_to_ascii(type),
(unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req));
result = sock_xmit(nbd, 1, &request, sizeof(request),
(type == NBD_CMD_WRITE) ? MSG_MORE : 0);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk),
"Send control failed (result %d)\n", result);
return -EIO;
}
if (type == NBD_CMD_WRITE) {
struct req_iterator iter;
struct bio_vec bvec;
/*
* we are really probing at internals to determine
* whether to set MSG_MORE or not...
*/
rq_for_each_segment(bvec, req, iter) {
flags = 0;
if (!rq_iter_last(bvec, iter))
flags = MSG_MORE;
dev_dbg(nbd_to_dev(nbd), "request %p: sending %d bytes data\n",
req, bvec.bv_len);
result = sock_send_bvec(nbd, &bvec, flags);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk),
"Send data failed (result %d)\n",
result);
return -EIO;
}
}
}
开发者ID:AngleFork，项目名称:linux，代码行数:61，代码来源:nbd.c
示例3: nbd_send_req
/* always call with the tx_lock held */
static int nbd_send_req(struct nbd_device *nbd, struct request *req)
{
int result, flags;
struct nbd_request request;
unsigned long size = blk_rq_bytes(req);
request.magic = htonl(NBD_REQUEST_MAGIC);
request.type = htonl(nbd_cmd(req));
if (nbd_cmd(req) == NBD_CMD_FLUSH) {
/* Other values are reserved for FLUSH requests. */
request.from = 0;
request.len = 0;
} else {
request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
request.len = htonl(size);
}
memcpy(request.handle, &req, sizeof(req));
dprintk(DBG_TX, "%s: request %p: sending control (%[email protected]%llu,%uB)\n",
nbd->disk->disk_name, req,
nbdcmd_to_ascii(nbd_cmd(req)),
(unsigned long long)blk_rq_pos(req) << 9,
blk_rq_bytes(req));
result = sock_xmit(nbd, 1, &request, sizeof(request),
(nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk),
"Send control failed (result %d)\n", result);
goto error_out;
}
if (nbd_cmd(req) == NBD_CMD_WRITE) {
struct req_iterator iter;
struct bio_vec *bvec;
/*
* we are really probing at internals to determine
* whether to set MSG_MORE or not...
*/
rq_for_each_segment(bvec, req, iter) {
flags = 0;
if (!rq_iter_last(req, iter))
flags = MSG_MORE;
dprintk(DBG_TX, "%s: request %p: sending %d bytes data\n",
nbd->disk->disk_name, req, bvec->bv_len);
result = sock_send_bvec(nbd, bvec, flags);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk),
"Send data failed (result %d)\n",
result);
goto error_out;
}
}
}
开发者ID:MotexT，项目名称:android_kernel_sony_msm8994_kitakami_r2，代码行数:55，代码来源:nbd.c
示例4: blk_unregister_queue
void blk_unregister_queue(struct gendisk *disk)
{
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return;
if (q->request_fn)
elv_unregister_queue(q);
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
blk_trace_remove_sysfs(disk_to_dev(disk));
kobject_put(&disk_to_dev(disk)->kobj);
}
开发者ID:AndroidDeveloperAlliance，项目名称:ZenKernel_Grouper，代码行数:15，代码来源:blk-sysfs.c
示例5: register_disk
void register_disk(struct gendisk *disk)
{
struct device *ddev = disk_to_dev(disk);
struct block_device *bdev;
struct disk_part_iter piter;
struct hd_struct *part;
int err;
#ifdef MY_ABC_HERE
int error;
#endif
ddev->parent = disk->driverfs_dev;
dev_set_name(ddev, disk->disk_name);
/* delay uevents, until we scanned partition table */
dev_set_uevent_suppress(ddev, 1);
if (device_add(ddev))
return;
#ifdef MY_ABC_HERE
if (ddev->parent) {
char *class_name;
class_name = make_class_name(ddev->class->name,
&ddev->kobj);
if (class_name) {
error = sysfs_create_link(&ddev->parent->kobj,
&ddev->kobj, class_name);
}
kfree(class_name);
}
开发者ID:Vincentxiaojie，项目名称:xpenology，代码行数:31，代码来源:genhd.c
示例6: blk_register_queue
int blk_register_queue(struct gendisk *disk)
{
int ret;
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return -ENXIO;
if (!q->request_fn)
return 0;
ret = kobject_add(&q->kobj, kobject_get(&disk_to_dev(disk)->kobj),
"%s", "queue");
if (ret < 0)
return ret;
kobject_uevent(&q->kobj, KOBJ_ADD);
ret = elv_register_queue(q);
if (ret) {
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
return ret;
}
return 0;
}
开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:28，代码来源:blk-sysfs.c
示例7: dm_mq_init_request_queue
int dm_mq_init_request_queue(struct mapped_device *md, struct dm_table *t)
{
struct request_queue *q;
struct dm_target *immutable_tgt;
int err;
if (!dm_table_all_blk_mq_devices(t)) {
DMERR("request-based dm-mq may only be stacked on blk-mq device(s)");
return -EINVAL;
}
md->tag_set = kzalloc_node(sizeof(struct blk_mq_tag_set), GFP_KERNEL, md->numa_node_id);
if (!md->tag_set)
return -ENOMEM;
md->tag_set->ops = &dm_mq_ops;
md->tag_set->queue_depth = dm_get_blk_mq_queue_depth();
md->tag_set->numa_node = md->numa_node_id;
md->tag_set->flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE;
md->tag_set->nr_hw_queues = dm_get_blk_mq_nr_hw_queues();
md->tag_set->driver_data = md;
md->tag_set->cmd_size = sizeof(struct dm_rq_target_io);
immutable_tgt = dm_table_get_immutable_target(t);
if (immutable_tgt && immutable_tgt->per_io_data_size) {
/* any target-specific per-io data is immediately after the tio */
md->tag_set->cmd_size += immutable_tgt->per_io_data_size;
md->init_tio_pdu = true;
}
err = blk_mq_alloc_tag_set(md->tag_set);
if (err)
goto out_kfree_tag_set;
q = blk_mq_init_allocated_queue(md->tag_set, md->queue);
if (IS_ERR(q)) {
err = PTR_ERR(q);
goto out_tag_set;
}
dm_init_md_queue(md);
/* backfill 'mq' sysfs registration normally done in blk_register_queue */
err = blk_mq_register_dev(disk_to_dev(md->disk), q);
if (err)
goto out_cleanup_queue;
return 0;
out_cleanup_queue:
blk_cleanup_queue(q);
out_tag_set:
blk_mq_free_tag_set(md->tag_set);
out_kfree_tag_set:
kfree(md->tag_set);
return err;
}
开发者ID:harlanstars，项目名称:linux，代码行数:57，代码来源:dm-rq.c
示例8: sock_xmit
/*
* Send or receive packet.
*/
static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size,
int msg_flags)
{
struct socket *sock = nbd->sock;
int result;
struct msghdr msg;
struct kvec iov;
sigset_t blocked, oldset;
unsigned long pflags = current->flags;
if (unlikely(!sock)) {
dev_err(disk_to_dev(nbd->disk),
"Attempted %s on closed socket in sock_xmit\n",
(send ? "send" : "recv"));
return -EINVAL;
}
/* Allow interception of SIGKILL only
* Don't allow other signals to interrupt the transmission */
siginitsetinv(&blocked, sigmask(SIGKILL));
sigprocmask(SIG_SETMASK, &blocked, &oldset);
current->flags |= PF_MEMALLOC;
do {
sock->sk->sk_allocation = GFP_NOIO | __GFP_MEMALLOC;
iov.iov_base = buf;
iov.iov_len = size;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_flags = msg_flags | MSG_NOSIGNAL;
if (send)
result = kernel_sendmsg(sock, &msg, &iov, 1, size);
else
result = kernel_recvmsg(sock, &msg, &iov, 1, size,
msg.msg_flags);
if (result <= 0) {
if (result == 0)
result = -EPIPE; /* short read */
break;
}
size -= result;
buf += result;
} while (size > 0);
sigprocmask(SIG_SETMASK, &oldset, NULL);
tsk_restore_flags(current, pflags, PF_MEMALLOC);
if (!send && nbd->xmit_timeout)
mod_timer(&nbd->timeout_timer, jiffies + nbd->xmit_timeout);
return result;
}
开发者ID:125radheyshyam，项目名称:linux-1，代码行数:59，代码来源:nbd.c
示例9: sock_shutdown
/*
* Forcibly shutdown the socket causing all listeners to error
*/
static void sock_shutdown(struct nbd_device *nbd)
{
if (!nbd->sock)
return;
dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n");
kernel_sock_shutdown(nbd->sock, SHUT_RDWR);
nbd->sock = NULL;
del_timer_sync(&nbd->timeout_timer);
}
开发者ID:125radheyshyam，项目名称:linux-1，代码行数:13，代码来源:nbd.c
示例10: blk_register_queue
int blk_register_queue(struct gendisk *disk)
{
add_my_disk(disk);
int ret;
struct device *dev = disk_to_dev(disk);
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return -ENXIO;
/*
* SCSI probing may synchronously create and destroy a lot of
* request_queues for non-existent devices. Shutting down a fully
* functional queue takes measureable wallclock time as RCU grace
* periods are involved. To avoid excessive latency in these
* cases, a request_queue starts out in a degraded mode which is
* faster to shut down and is made fully functional here as
* request_queues for non-existent devices never get registered.
*/
if (!blk_queue_init_done(q)) {
queue_flag_set_unlocked(QUEUE_FLAG_INIT_DONE, q);
blk_queue_bypass_end(q);
if (q->mq_ops)
blk_mq_finish_init(q);
}
ret = blk_trace_init_sysfs(dev);
if (ret)
return ret;
ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
if (ret < 0) {
blk_trace_remove_sysfs(dev);
return ret;
}
kobject_uevent(&q->kobj, KOBJ_ADD);
if (q->mq_ops)
blk_mq_register_disk(disk);
if (!q->request_fn)
return 0;
ret = elv_register_queue(q);
if (ret) {
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
blk_trace_remove_sysfs(dev);
kobject_put(&dev->kobj);
return ret;
}
return 0;
}
开发者ID:OneDonkeyKong，项目名称:linux，代码行数:55，代码来源:blk-sysfs.c
示例11: sock_shutdown
/*
* Forcibly shutdown the socket causing all listeners to error
*/
static void sock_shutdown(struct nbd_device *nbd, int lock)
{
if (lock)
mutex_lock(&nbd->tx_lock);
if (nbd->sock) {
dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n");
kernel_sock_shutdown(nbd->sock, SHUT_RDWR);
nbd->sock = NULL;
}
if (lock)
mutex_unlock(&nbd->tx_lock);
}
开发者ID:JcShang，项目名称:linux-80211n-csitool，代码行数:15，代码来源:nbd.c
示例12:
static struct zram *dev_to_zram(struct device *dev)
{
int i;
struct zram *zram = NULL;
for (i = 0; i < zram_get_num_devices(); i++) {
zram = &zram_devices[i];
if (disk_to_dev(zram->disk) == dev)
break;
}
return zram;
}
开发者ID:lchtlx，项目名称:zte_msm8x30_cm11，代码行数:13，代码来源:zram_sysfs.c
示例13:
static struct xzram *dev_to_xzram(struct device *dev)
{
int i;
struct xzram *xzram = NULL;
for (i = 0; i < xzram_num_devices; i++) {
xzram = &xzram_devices[i];
if (disk_to_dev(xzram->disk) == dev)
break;
}
return xzram;
}
开发者ID:Scorpio92，项目名称:mstar6a918，代码行数:13，代码来源:xzram_sysfs.c
示例14: MKDEV
struct hd_struct *add_partition(struct gendisk *disk, int partno,
sector_t start, sector_t len, int flags,
struct partition_meta_info *info)
{
struct hd_struct *p;
dev_t devt = MKDEV(0, 0);
struct device *ddev = disk_to_dev(disk);
struct device *pdev;
struct disk_part_tbl *ptbl;
const char *dname;
int err;
err = disk_expand_part_tbl(disk, partno);
if (err)
return ERR_PTR(err);
ptbl = disk->part_tbl;
if (ptbl->part[partno])
return ERR_PTR(-EBUSY);
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
return ERR_PTR(-EBUSY);
if (!init_part_stats(p)) {
err = -ENOMEM;
goto out_free;
}
seqcount_init(&p->nr_sects_seq);
pdev = part_to_dev(p);
p->start_sect = start;
p->alignment_offset =
queue_limit_alignment_offset(&disk->queue->limits, start);
p->discard_alignment =
queue_limit_discard_alignment(&disk->queue->limits, start);
p->nr_sects = len;
p->partno = partno;
p->policy = get_disk_ro(disk);
if (info) {
struct partition_meta_info *pinfo = alloc_part_info(disk);
if (!pinfo)
goto out_free_stats;
memcpy(pinfo, info, sizeof(*info));
p->info = pinfo;
}
dname = dev_name(ddev);
if (isdigit(dname[strlen(dname) - 1]
开发者ID:J0ngKwanPak，项目名称:linux，代码行数:51，代码来源:partition-generic.c
示例15: sock_xmit
/*
* Send or receive packet.
*/
static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size,
int msg_flags)
{
struct socket *sock = nbd->sock;
int result;
struct msghdr msg;
struct kvec iov;
unsigned long pflags = current->flags;
if (unlikely(!sock)) {
dev_err(disk_to_dev(nbd->disk),
"Attempted %s on closed socket in sock_xmit\n",
(send ? "send" : "recv"));
return -EINVAL;
}
current->flags |= PF_MEMALLOC;
do {
sock->sk->sk_allocation = GFP_NOIO | __GFP_MEMALLOC;
iov.iov_base = buf;
iov.iov_len = size;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_flags = msg_flags | MSG_NOSIGNAL;
if (send)
result = kernel_sendmsg(sock, &msg, &iov, 1, size);
else
result = kernel_recvmsg(sock, &msg, &iov, 1, size,
msg.msg_flags);
if (result <= 0) {
if (result == 0)
result = -EPIPE; /* short read */
break;
}
size -= result;
buf += result;
} while (size > 0);
tsk_restore_flags(current, pflags, PF_MEMALLOC);
if (!send && nbd->xmit_timeout)
mod_timer(&nbd->timeout_timer, jiffies + nbd->xmit_timeout);
return result;
}
开发者ID:AngleFork，项目名称:linux，代码行数:52，代码来源:nbd.c
示例16: tier_attr_show
/* tier sysfs attributes */
ssize_t tier_attr_show(struct device *dev, char *page,
ssize_t(*callback) (struct tier_device *, char *))
{
struct tier_device *l, *lo = NULL;
mutex_lock(&tier_devices_mutex);
list_for_each_entry(l, &device_list, list)
if (disk_to_dev(l->gd) == dev) {
lo = l;
break;
}
mutex_unlock(&tier_devices_mutex);
return lo ? callback(lo, page) : -EIO;
}
开发者ID:borland667，项目名称:btier，代码行数:16，代码来源:btier_sysfs.c
示例17: sock_shutdown
/*
* Forcibly shutdown the socket causing all listeners to error
*/
static void sock_shutdown(struct nbd_device *nbd)
{
spin_lock_irq(&nbd->sock_lock);
if (!nbd->sock) {
spin_unlock_irq(&nbd->sock_lock);
return;
}
dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n");
kernel_sock_shutdown(nbd->sock, SHUT_RDWR);
sockfd_put(nbd->sock);
nbd->sock = NULL;
spin_unlock_irq(&nbd->sock_lock);
del_timer(&nbd->timeout_timer);
}
开发者ID:AngleFork，项目名称:linux，代码行数:20，代码来源:nbd.c
示例18: sock_shutdown
/*
* Forcibly shutdown the socket causing all listeners to error
*/
static void sock_shutdown(struct nbd_device *nbd)
{
int i;
if (nbd->num_connections == 0)
return;
if (test_and_set_bit(NBD_DISCONNECTED, &nbd->runtime_flags))
return;
for (i = 0; i < nbd->num_connections; i++) {
struct nbd_sock *nsock = nbd->socks[i];
mutex_lock(&nsock->tx_lock);
kernel_sock_shutdown(nsock->sock, SHUT_RDWR);
mutex_unlock(&nsock->tx_lock);
}
dev_warn(disk_to_dev(nbd->disk), "shutting down sockets\n");
}
开发者ID:kishore1006，项目名称:linux，代码行数:20，代码来源:nbd.c
示例19: blk_register_queue
int blk_register_queue(struct gendisk *disk)
{
int ret;
struct device *dev = disk_to_dev(disk);
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return -ENXIO;
/*
* Initialization must be complete by now. Finish the initial
* bypass from queue allocation.
*/
blk_queue_bypass_end(q);
queue_flag_set_unlocked(QUEUE_FLAG_INIT_DONE, q);
ret = blk_trace_init_sysfs(dev);
if (ret)
return ret;
ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
if (ret < 0) {
blk_trace_remove_sysfs(dev);
return ret;
}
kobject_uevent(&q->kobj, KOBJ_ADD);
if (q->mq_ops)
blk_mq_register_disk(disk);
if (!q->request_fn)
return 0;
ret = elv_register_queue(q);
if (ret) {
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
blk_trace_remove_sysfs(dev);
kobject_put(&dev->kobj);
return ret;
}
return 0;
}
开发者ID:gmujica，项目名称:ubuntu-fixes，代码行数:45，代码来源:blk-sysfs.c
示例20: sock_shutdown
static void sock_shutdown(struct nbd_device *nbd, int lock)
{
/* Forcibly shutdown the socket causing all listeners
* to error
*
* FIXME: This code is duplicated from sys_shutdown, but
* there should be a more generic interface rather than
* calling socket ops directly here */
if (lock)
mutex_lock(&nbd->tx_lock);
if (nbd->sock) {
dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n");
kernel_sock_shutdown(nbd->sock, SHUT_RDWR);
nbd->sock = NULL;
}
if (lock)
mutex_unlock(&nbd->tx_lock);
}
开发者ID:ZolaIII，项目名称:android_kernel_synopsis_deprecated，代码行数:18，代码来源:nbd.c
注：本文中的disk_to_dev函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论