• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ dhd_wl_ioctl_cmd函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中dhd_wl_ioctl_cmd函数的典型用法代码示例。如果您正苦于以下问题：C++ dhd_wl_ioctl_cmd函数的具体用法？C++ dhd_wl_ioctl_cmd怎么用？C++ dhd_wl_ioctl_cmd使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了dhd_wl_ioctl_cmd函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: dhd_conf_set_roam

int
dhd_conf_set_roam(dhd_pub_t *dhd)
{
	int bcmerror = -1;
	char iovbuf[WL_EVENTING_MASK_LEN + 12];	/*  Room for "event_msgs" + '\0' + bitvec  */

	printf("%s: Set roam_off %d\n", __FUNCTION__, dhd->conf->roam_off);
	dhd_roam_disable = dhd->conf->roam_off;
	bcm_mkiovar("roam_off", (char *)&dhd->conf->roam_off, 4, iovbuf, sizeof(iovbuf));
	dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);

	if (!dhd->conf->roam_off || !dhd->conf->roam_off_suspend) {
		printf("%s: Set roam_trigger %d\n", __FUNCTION__, dhd->conf->roam_trigger[0]);
		if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_ROAM_TRIGGER, dhd->conf->roam_trigger,
				sizeof(dhd->conf->roam_trigger), TRUE, 0)) < 0)
			CONFIG_ERROR(("%s: roam trigger set failed %d\n", __FUNCTION__, bcmerror));

		printf("%s: Set roam_scan_period %d\n", __FUNCTION__, dhd->conf->roam_scan_period[0]);
		if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_ROAM_SCAN_PERIOD, dhd->conf->roam_scan_period,
				sizeof(dhd->conf->roam_scan_period), TRUE, 0)) < 0)
			CONFIG_ERROR(("%s: roam scan period set failed %d\n", __FUNCTION__, bcmerror));

		printf("%s: Set roam_delta %d\n", __FUNCTION__, dhd->conf->roam_delta[0]);
		if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_ROAM_DELTA, dhd->conf->roam_delta,
				sizeof(dhd->conf->roam_delta), TRUE, 0)) < 0)
			CONFIG_ERROR(("%s: roam delta set failed %d\n", __FUNCTION__, bcmerror));

		printf("%s: Set fullroamperiod %d\n", __FUNCTION__, dhd->conf->fullroamperiod);
		bcm_mkiovar("fullroamperiod", (char *)&dhd->conf->fullroamperiod, 4, iovbuf, sizeof(iovbuf));
		if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0)) < 0)
			CONFIG_ERROR(("%s: roam fullscan period set failed %d\n", __FUNCTION__, bcmerror));
	}

	return bcmerror;
}
开发者ID:davidftv，项目名称:s82_kernel，代码行数:35，代码来源:dhd_config.c


示例2: dhd_pno_clean

int dhd_pno_clean(dhd_pub_t *dhd)
{
	char iovbuf[128];
	int pfn_enabled = 0;
	int iov_len = 0;
	int ret;

	/* Disable pfn */
	iov_len = bcm_mkiovar("pfn", (char *)&pfn_enabled, 4, iovbuf, sizeof(iovbuf));
	if ((ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0)) >= 0) {
		/* clear pfn */
		iov_len = bcm_mkiovar("pfnclear", 0, 0, iovbuf, sizeof(iovbuf));
		if (iov_len) {
			if ((ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf,
			                            iov_len, TRUE, 0)) < 0) {
				DHD_ERROR(("%s failed code %d\n", __FUNCTION__, ret));
			}
		}
		else {
			ret = -1;
			DHD_ERROR(("%s failed code %d\n", __FUNCTION__, iov_len));
		}
	}
	else
		DHD_ERROR(("%s failed code %d\n", __FUNCTION__, ret));

	return ret;
}
开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:28，代码来源:dhd_common.c


示例3: sec_control_pm

void sec_control_pm(dhd_pub_t *dhd, uint *power_mode)
{
	struct file *fp = NULL;
	char *filepath = "/data/.psm.info";
	mm_segment_t oldfs = {0};
	char power_val = 0;
	char iovbuf[WL_EVENTING_MASK_LEN + 12];
	
	g_PMcontrol = FALSE;
	
	fp = filp_open(filepath, O_RDONLY, 0);
	if (IS_ERR(fp) || (fp==NULL)) {
		/* Enable PowerSave Mode */
		dhd_wl_ioctl_cmd(dhd, WLC_SET_PM, (char *)power_mode, sizeof(uint), TRUE, 0);
		
		fp = filp_open(filepath, O_RDWR | O_CREAT, 0666);
		if (IS_ERR(fp) || (fp==NULL)) {
			DHD_ERROR(("[%s, %d] /data/.psm.info open failed\n", __FUNCTION__, __LINE__));
			return;
		}
		else {
			oldfs = get_fs();
			set_fs(get_ds());
			
			if (fp->f_mode & FMODE_WRITE) {
				power_val = '1';
				fp->f_op->write(fp, (const char *)&power_val, sizeof(char), &fp->f_pos);
			}
			set_fs(oldfs);
		}
	}
	else {
		kernel_read(fp, fp->f_pos, &power_val, 1);
		DHD_ERROR(("POWER_VAL = %c \r\n" , power_val));
		
		if(power_val == '0') {
#ifdef ROAM_ENABLE
			uint roamvar = 1;
#endif
			*power_mode = PM_OFF;	
			/* Disable PowerSave Mode */
			dhd_wl_ioctl_cmd(dhd, WLC_SET_PM, (char *)power_mode, sizeof(uint), TRUE, 0);
			/* Turn off MPC in AP mode */
			bcm_mkiovar("mpc", (char *)power_mode, 4, iovbuf, sizeof(iovbuf));
			dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);
			g_PMcontrol = TRUE;
#ifdef ROAM_ENABLE
			bcm_mkiovar("roam_off", (char *)&roamvar, 4, iovbuf, sizeof(iovbuf));
			dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);
#endif
		} else {
			dhd_wl_ioctl_cmd(dhd, WLC_SET_PM, (char *)power_mode, sizeof(uint), TRUE, 0);
		}
	}
	
	if(fp)
		filp_close(fp, NULL);
}
开发者ID:mkannapa，项目名称:sgh-i727-kernels，代码行数:58，代码来源:dhd_custom_sec.c


示例4: dhd_sel_ant_from_file

int dhd_sel_ant_from_file(dhd_pub_t *dhd)
{
	struct file *fp = NULL;
	int ret = -1;
	uint32 ant_val = 0;
	char *filepath = "/data/.ant.info";
	char iovbuf[WLC_IOCTL_SMLEN];

	/* Read antenna settings from the file */
	fp = filp_open(filepath, O_RDONLY, 0);
	if (IS_ERR(fp)) {
		DHD_ERROR(("[WIFI] %s: File [%s] open error\n", __FUNCTION__, filepath));
		return ret;
	} else {
		ret = kernel_read(fp, 0, (char *)&ant_val, 4);
		if (ret < 0) {
			DHD_ERROR(("[WIFI] %s: File read error, ret=%d\n", __FUNCTION__, ret));
			filp_close(fp, NULL);
			return ret;
		}

		ant_val = bcm_atoi((char *)&ant_val);

		DHD_ERROR(("[WIFI] %s: ANT val = %d\n", __FUNCTION__, ant_val));
		filp_close(fp, NULL);

		/* Check value from the file */
		if (ant_val < 1 || ant_val > 3) {
			DHD_ERROR(("[WIFI] %s: Invalid value %d read from the file %s\n",
				__FUNCTION__, ant_val, filepath));
			return -1;
		}
	}

	/* Select Antenna */
	bcm_mkiovar("txchain", (char *)&ant_val, 4, iovbuf, sizeof(iovbuf));
	ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);
	if (ret) {
		DHD_ERROR(("[WIFI] %s: Fail to execute dhd_wl_ioctl_cmd(): txchain, ret=%d\n",
			__FUNCTION__, ret));
		return ret;
	}

	bcm_mkiovar("rxchain", (char *)&ant_val, 4, iovbuf, sizeof(iovbuf));
	ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);
	if (ret) {
		DHD_ERROR(("[WIFI] %s: Fail to execute dhd_wl_ioctl_cmd(): rxchain, ret=%d\n",
			__FUNCTION__, ret));
		return ret;
	}

	return 0;
}
开发者ID:emreharbutoglu，项目名称:i9105Sammy，代码行数:53，代码来源:dhd_custom_sec.c


示例5: dhd_cfg80211_set_p2p_info

/*
 * dhd_cfg80211_set_p2p_info : gets called when GO or GC created
 */
s32 dhd_cfg80211_set_p2p_info(struct wl_priv *wl, int val)
{
	dhd_pub_t *dhd =  (dhd_pub_t *)(wl->pub);
	int bcn_timeout = DHD_BEACON_TIMEOUT_HIGH;
	char iovbuf[30];

	DHD_MYTRACE(("%s-%s\n", __FILE__, __FUNCTION__));

	dhd->op_mode |= val;
	WL_ERR(("Set : op_mode=%d\n", dhd->op_mode));

#ifdef ARP_OFFLOAD_SUPPORT
	/* IF P2P is enabled, disable arpoe */
	dhd_arp_offload_set(dhd, 0);
	dhd_arp_offload_enable(dhd, false);
#endif /* ARP_OFFLOAD_SUPPORT */
	/* diable all filtering in p2p mode */
	dhd_os_set_packet_filter(dhd, 0);

	/* Setup timeout if Beacons are lost and roam is off to report link down */
	bcm_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf, sizeof(iovbuf));
	dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);


	return 0;
}
开发者ID:devil1437，项目名称:Nexus4Wifi，代码行数:29，代码来源:dhd_cfg80211.c


示例6: dhd_pno_enable

int dhd_pno_enable(dhd_pub_t *dhd, int pfn_enabled)
{
	char iovbuf[128];
	int ret = -1;

	if ((!dhd) && ((pfn_enabled != 0) || (pfn_enabled != 1))) {
		DHD_ERROR(("%s error exit\n", __FUNCTION__));
		return ret;
	}

	/* Enable/disable PNO */
	if ((ret = bcm_mkiovar("pfn", (char *)&pfn_enabled, 4, iovbuf, sizeof(iovbuf))) > 0) {
		if ((ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf,
		                            sizeof(iovbuf), TRUE, 0)) < 0) {
			DHD_ERROR(("%s failed for error=%d\n", __FUNCTION__, ret));
			return ret;
		}
		else {
			dhd->pno_enable = pfn_enabled;
			DHD_TRACE(("%s set pno as %d\n", __FUNCTION__, dhd->pno_enable));
		}
	}
	else DHD_ERROR(("%s failed err=%d\n", __FUNCTION__, ret));

	return ret;
}
开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:26，代码来源:dhd_common.c


示例7: dhd_iscan_request

int
dhd_iscan_request(void * dhdp, uint16 action)
{
	int rc;
	wl_iscan_params_t params;
	dhd_pub_t *dhd = dhd_bus_pub(dhdp);
	char buf[WLC_IOCTL_SMLEN];

	DHD_TRACE(("%s: Entered\n", __FUNCTION__));

	memset(&params, 0, sizeof(wl_iscan_params_t));
	memcpy(&params.params.bssid, &ether_bcast, ETHER_ADDR_LEN);

	params.params.bss_type = DOT11_BSSTYPE_ANY;
	params.params.scan_type = DOT11_SCANTYPE_ACTIVE;

	params.params.nprobes = htod32(-1);
	params.params.active_time = htod32(-1);
	params.params.passive_time = htod32(-1);
	params.params.home_time = htod32(-1);
	params.params.channel_num = htod32(0);

	params.version = htod32(ISCAN_REQ_VERSION);
	params.action = htod16(action);
	params.scan_duration = htod16(0);

	bcm_mkiovar("iscan", (char *)&params, sizeof(wl_iscan_params_t), buf, WLC_IOCTL_SMLEN);
	rc = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, buf, WLC_IOCTL_SMLEN, TRUE, 0);

	return rc;
}
开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:31，代码来源:dhd_common.c


示例8: dhd_check_module_mac

int dhd_check_module_mac(dhd_pub_t *dhd, struct ether_addr *mac)
{
	int ret = -1;
	unsigned char cis_buf[CIS_BUF_SIZE] = {0};
	unsigned char mac_buf[20] = {0};
	unsigned char otp_mac_buf[20] = {0};
	const char *macfilepath = MACINFO_EFS;

	/* Try reading out from CIS */
	cis_rw_t *cish = (cis_rw_t *)&cis_buf[8];
	struct file *fp_mac = NULL;

	cish->source = 0;
	cish->byteoff = 0;
	cish->nbytes = sizeof(cis_buf);

	strcpy(cis_buf, "cisdump");
	ret = dhd_wl_ioctl_cmd(dhd, WLC_GET_VAR, cis_buf,
		sizeof(cis_buf), 0, 0);
	if (ret < 0) {
		DHD_TRACE(("%s: CIS reading failed, err=%d\n", __func__,
			ret));
		sprintf(otp_mac_buf, "%02X:%02X:%02X:%02X:%02X:%02X\n",
			mac->octet[0], mac->octet[1], mac->octet[2],
			mac->octet[3], mac->octet[4], mac->octet[5]);
		DHD_ERROR(("%s: Check module mac by legacy FW : %02X:%02X:%02X\n",
			__func__, mac->octet[0], mac->octet[4], mac->octet[5]));
	} else {
		unsigned char mac_id[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
#ifdef DUMP_CIS
		dhd_dump_cis(cis_buf, 48);
#endif
		mac_id[0] = cis_buf[CIS_MAC_OFFSET];
		mac_id[1] = cis_buf[CIS_MAC_OFFSET + 1];
		mac_id[2] = cis_buf[CIS_MAC_OFFSET + 2];
		mac_id[3] = cis_buf[CIS_MAC_OFFSET + 3];
		mac_id[4] = cis_buf[CIS_MAC_OFFSET + 4];
		mac_id[5] = cis_buf[CIS_MAC_OFFSET + 5];

		sprintf(otp_mac_buf, "%02X:%02X:%02X:%02X:%02X:%02X\n",
			mac_id[0], mac_id[1], mac_id[2], mac_id[3], mac_id[4],
			mac_id[5]);
		DHD_ERROR(("[WIFI]mac_id is setted from OTP \n"));
	}

	fp_mac = filp_open(macfilepath, O_RDONLY, 0);
	if (!IS_ERR(fp_mac)) {
		DHD_ERROR(("[WIFI]Check Mac address in .mac.info \n"));
		kernel_read(fp_mac, fp_mac->f_pos, mac_buf, sizeof(mac_buf));
		filp_close(fp_mac, NULL);

		if (strncmp(mac_buf, otp_mac_buf, 17) != 0) {
			DHD_ERROR(("[WIFI]file MAC is wrong. Write OTP MAC in .mac.info \n"));
			dhd_write_mac_file(macfilepath, otp_mac_buf, sizeof(otp_mac_buf));
		}
	}

	return ret;
}
开发者ID:ShinySide，项目名称:HispAsian_Kernel_NH7，代码行数:59，代码来源:dhd_custom_sec.c


示例9: check_module_cid

int check_module_cid(dhd_pub_t *dhd)
{
	int ret = -1;
	unsigned char cis_buf[128] = {0};
	unsigned char cid_buf[10] = {0};
	const char* cidfilepath = "/data/.cid.info";
	
	/* Try reading out from CIS */
	cis_rw_t *cish = (cis_rw_t *)&cis_buf[8];
	struct file *fp_cid = NULL;
	
	fp_cid = filp_open(cidfilepath, O_RDONLY, 0);
	if (!IS_ERR(fp_cid)) {
		kernel_read(fp_cid, fp_cid->f_pos, cid_buf, sizeof(cid_buf));
		if(strstr(cid_buf,"samsung")||strstr(cid_buf,"murata")||strstr(cid_buf,"semcove")) {
			/* file does exist, just return */
			filp_close(fp_cid, NULL);
			return 0;
		}
		
		DHD_ERROR(("[WIFI].cid.info file already exists but it contains an unknown id [%s]\n", cid_buf));
	}
	cish->source = 0;
	cish->byteoff = 0;
	cish->nbytes = sizeof(cis_buf);
	
	strcpy(cis_buf, "cisdump");
	ret = dhd_wl_ioctl_cmd(dhd, WLC_GET_VAR, cis_buf, sizeof(cis_buf), 0, 0);
	if (ret < 0) {
		DHD_ERROR(("%s: CIS reading failed, err=%d\n", __FUNCTION__, ret));
	} else {
		unsigned char id[4] = {0x80, 0x06, 0x81, 0x00};
		unsigned char id_swb42a[4] = {0x80, 0x02, 0x81, 0x99};  //SWB_42A

#ifdef DUMP_CIS
		dump_cis(cis_buf, 48);
#endif
		if (memcmp(&cis_buf[CIS_CID_OFFSET], id, 4) == 0) {
			DHD_ERROR(("CID MATCH FOUND\n"));
			write_cid_file(cidfilepath, "murata", 6);
		}
		else if (memcmp(&cis_buf[CIS_CID_OFFSET], id_swb42a, 4) == 0) { //SWB_42A
			DHD_ERROR(("CID MATCH FOUND semcove \n"));
			write_cid_file(cidfilepath, "semcove", 7);
		}		
		else {
			DHD_ERROR(("CID MISMATCH 0x%02X 0x%02X 0x%02X 0x%02X\n", 
				cis_buf[CIS_CID_OFFSET], cis_buf[CIS_CID_OFFSET+1], 
				cis_buf[CIS_CID_OFFSET+2], cis_buf[CIS_CID_OFFSET+3]));
			write_cid_file(cidfilepath, "samsung", 7);
		}
	}
	
	return ret;
}
开发者ID:mkannapa，项目名称:sgh-i727-kernels，代码行数:55，代码来源:dhd_custom_sec.c


示例10: dhd_conf_set_bw

void
dhd_conf_set_bw(dhd_pub_t *dhd)
{
    int bcmerror = -1;
    char iovbuf[WL_EVENTING_MASK_LEN + 12];	/*  Room for "event_msgs" + '\0' + bitvec  */
    uint32 mimo_bw_cap = 1; /* Turn HT40 on in 2.4 GHz */

    if (dhd_bus_chip_id(dhd) == BCM43341_CHIP_ID ||
            dhd_bus_chip_id(dhd) == BCM4324_CHIP_ID ||
            dhd_bus_chip_id(dhd) == BCM4335_CHIP_ID ||
            dhd_bus_chip_id(dhd) == BCM4339_CHIP_ID) {
        if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_DOWN, NULL, 0, TRUE, 0)) < 0)
            CONFIG_ERROR(("%s: WLC_DOWN setting failed %d\n", __FUNCTION__, bcmerror));
        /* Enable HT40 in 2.4 GHz */
        printf("%s: Enable HT40 in 2.4 GHz\n", __FUNCTION__);
        bcm_mkiovar("mimo_bw_cap", (char *)&mimo_bw_cap, 4, iovbuf, sizeof(iovbuf));
        if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0)) < 0)
            CONFIG_ERROR(("%s: mimo_bw_cap setting failed %d\n", __FUNCTION__, bcmerror));
    }
}
开发者ID:kclin，项目名称:linux-sdk-kernel-source，代码行数:20，代码来源:dhd_config.c


示例11: dhd_conf_set_band

int
dhd_conf_set_band(dhd_pub_t *dhd)
{
	int bcmerror = -1;

	if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_BAND, &dhd->conf->band,
		sizeof(dhd->conf->band), TRUE, 0)) < 0)
		CONFIG_ERROR(("%s: band set failed %d\n", __FUNCTION__, bcmerror));

	return bcmerror;
}
开发者ID:davidftv，项目名称:s82_kernel，代码行数:11，代码来源:dhd_config.c


示例12: dhd_flow_prio_map

/* Set/Get flwo ring priority map */
int dhd_flow_prio_map(dhd_pub_t *dhd, uint8 *map, bool set)
{
	uint8 iovbuf[24];
	if (!set) {
		bcm_mkiovar("bus:fl_prio_map", NULL, 0, (char*)iovbuf, sizeof(iovbuf));
		if (dhd_wl_ioctl_cmd(dhd, WLC_GET_VAR, iovbuf, sizeof(iovbuf), FALSE, 0) < 0) {
			DHD_ERROR(("%s: failed to get fl_prio_map\n", __FUNCTION__));
			return BCME_ERROR;
		}
		*map = iovbuf[0];
		return BCME_OK;
	}
	bcm_mkiovar("bus:fl_prio_map", (char *)map, 4, (char*)iovbuf, sizeof(iovbuf));
	if (dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0) < 0) {
		DHD_ERROR(("%s: failed to set fl_prio_map \n",
			__FUNCTION__));
		return BCME_ERROR;
	}
	return BCME_OK;
}
开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:21，代码来源:dhd_flowring.c


示例13: dhd_conf_force_wme

void
dhd_conf_force_wme(dhd_pub_t *dhd)
{
    int bcmerror = -1;
    char iovbuf[WL_EVENTING_MASK_LEN + 12];	/*  Room for "event_msgs" + '\0' + bitvec  */

    if (dhd_bus_chip_id(dhd) == BCM43362_CHIP_ID && dhd->conf->force_wme_ac) {
        bcm_mkiovar("force_wme_ac", (char *)&dhd->conf->force_wme_ac, 4, iovbuf, sizeof(iovbuf));
        if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0)) < 0)
            CONFIG_ERROR(("%s: force_wme_ac setting failed %d\n", __FUNCTION__, bcmerror));
    }
}
开发者ID:kclin，项目名称:linux-sdk-kernel-source，代码行数:12，代码来源:dhd_config.c


示例14: dhd_iscan_get_partial_result

static int
dhd_iscan_get_partial_result(void *dhdp, uint *scan_count)
{
	wl_iscan_results_t *list_buf;
	wl_iscan_results_t list;
	wl_scan_results_t *results;
	iscan_buf_t *iscan_cur;
	int status = -1;
	dhd_pub_t *dhd = dhd_bus_pub(dhdp);
	int rc;

	DHD_TRACE(("%s: Enter\n", __FUNCTION__));

	iscan_cur = dhd_iscan_allocate_buf(dhd, &iscan_chain);
	if (!iscan_cur) {
		DHD_ERROR(("%s: Failed to allocate node\n", __FUNCTION__));
		dhd_iscan_free_buf(dhdp, 0);
		dhd_iscan_request(dhdp, WL_SCAN_ACTION_ABORT);
		dhd_ind_scan_confirm(dhdp, FALSE);
		goto fail;
	}

	dhd_iscan_lock();

	memset(iscan_cur->iscan_buf, 0, WLC_IW_ISCAN_MAXLEN);
	list_buf = (wl_iscan_results_t*)iscan_cur->iscan_buf;
	results = &list_buf->results;
	results->buflen = WL_ISCAN_RESULTS_FIXED_SIZE;
	results->version = 0;
	results->count = 0;

	memset(&list, 0, sizeof(list));
	list.results.buflen = htod32(WLC_IW_ISCAN_MAXLEN);
	bcm_mkiovar("iscanresults", (char *)&list, WL_ISCAN_RESULTS_FIXED_SIZE,
		iscan_cur->iscan_buf, WLC_IW_ISCAN_MAXLEN);
	rc = dhd_wl_ioctl_cmd(dhd, WLC_GET_VAR, iscan_cur->iscan_buf,
	                      WLC_IW_ISCAN_MAXLEN, FALSE, 0);

	results->buflen = dtoh32(results->buflen);
	results->version = dtoh32(results->version);
	*scan_count = results->count = dtoh32(results->count);
	status = dtoh32(list_buf->status);
	DHD_TRACE(("%s: Got %d resuls\n", __FUNCTION__, results->count));

	dhd_iscan_unlock();

	if (!(*scan_count)) {
		dhd_iscan_free_buf(dhdp, iscan_cur);
	}
fail:
	return status;
}
开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:52，代码来源:dhd_common.c


示例15: dhd_conf_set_stbc

void
dhd_conf_set_stbc(dhd_pub_t *dhd)
{
    int bcmerror = -1;
    char iovbuf[WL_EVENTING_MASK_LEN + 12];	/*  Room for "event_msgs" + '\0' + bitvec  */
    uint stbc = 0;

    if (dhd_bus_chip_id(dhd) == BCM4324_CHIP_ID) {
        if (dhd->conf->stbc >= 0) {
            stbc = (uint)dhd->conf->stbc;
            printf("%s: set stbc_tx %d\n", __FUNCTION__, stbc);
            bcm_mkiovar("stbc_tx", (char *)&stbc, 4, iovbuf, sizeof(iovbuf));
            if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0)) < 0)
                CONFIG_ERROR(("%s: stbc_tx setting failed %d\n", __FUNCTION__, bcmerror));

            printf("%s: set stbc_rx %d\n", __FUNCTION__, stbc);
            bcm_mkiovar("stbc_rx", (char *)&stbc, 4, iovbuf, sizeof(iovbuf));
            if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0)) < 0)
                CONFIG_ERROR(("%s: stbc_rx setting failed %d\n", __FUNCTION__, bcmerror));
        }
    }
}
开发者ID:kclin，项目名称:linux-sdk-kernel-source，代码行数:22，代码来源:dhd_config.c


示例16: wl_iw_get_wireless_stats

int wl_iw_get_wireless_stats(dhd_pub_t *pub, struct iw_statistics *wstats)
{
	int res = 0;
	wl_cnt_t cnt;
	int phy_noise;
	scb_val_t scb_val;

	if (pub == NULL)
	{
		pub = G_dhd;
	}

    #if 0
	phy_noise = 0;
	res = dhd_wl_ioctl_cmd(pub, WLC_GET_PHY_NOISE, &phy_noise, sizeof(phy_noise), 0);
	if (res)
		goto done;

	phy_noise = dtoh32(phy_noise);
	printf("wl_iw_get_wireless_stats phy noise=%d\n", phy_noise);
    #endif

	bzero(&scb_val, sizeof(scb_val_t));
    
	res = dhd_wl_ioctl_cmd(pub, WLC_GET_RSSI, &scb_val, sizeof(scb_val_t), 0);
	if (res)
		goto done;
	WiFiCurAPRssi = -dtoh32(scb_val.val);
	
    printf("WiFiCurAPRssi = %d\n", WiFiCurAPRssi);
	//printf("wl_iw_get_wireless_stats phy rssi=%d %02x:%02x:%02x:%02x:%02x:%02x\n", WiFiCurAPRssi, 
	//	  scb_val.ea.octet[0], scb_val.ea.octet[1], scb_val.ea.octet[2], scb_val.ea.octet[3],
	//	  scb_val.ea.octet[4], scb_val.ea.octet[5]);

done:
	return res;
}
开发者ID:imaginegit，项目名称:wifisdk，代码行数:37，代码来源:wificontrol.c


示例17: dhd_rsdb_mode_from_file

/*
 * RSDBOFFINFO = /data/.rsdb.info
 *  - rsdb_mode = 1            => Don't change RSDB mode / RSDB stay as turn on
 *  - rsdb_mode = 0            => Trun Off RSDB mode
 *  - file not exist          => Don't change RSDB mode / RSDB stay as turn on
 */
int dhd_rsdb_mode_from_file(dhd_pub_t *dhd)
{
	struct file *fp = NULL;
	int ret = -1;
	uint32 rsdb_mode = 0;
	char *filepath = RSDBINFO;
	char iovbuf[WLC_IOCTL_SMLEN];

	/* Read RSDB on/off request from the file */
	fp = filp_open(filepath, O_RDONLY, 0);
	if (IS_ERR(fp)) {
		DHD_ERROR(("[WIFI_SEC] %s: File [%s] doesn't exist\n", __FUNCTION__, filepath));
		return ret;
	} else {
		ret = kernel_read(fp, 0, (char *)&rsdb_mode, 4);
		if (ret < 0) {
			DHD_ERROR(("[WIFI_SEC] %s: File read error, ret=%d\n", __FUNCTION__, ret));
			filp_close(fp, NULL);
			return ret;
		}

		rsdb_mode = bcm_atoi((char *)&rsdb_mode);

		DHD_ERROR(("[WIFI_SEC] %s: RSDB mode from file = %d\n", __FUNCTION__, rsdb_mode));
		filp_close(fp, NULL);

		/* Check value from the file */
		if (rsdb_mode > 2) {
			DHD_ERROR(("[WIFI_SEC] %s: Invalid value %d read from the file %s\n",
				__FUNCTION__, rsdb_mode, filepath));
			return -1;
		}
	}

	if (rsdb_mode == 0) {
		bcm_mkiovar("rsdb_mode", (char *)&rsdb_mode, sizeof(rsdb_mode),
			iovbuf, sizeof(iovbuf));

		if ((ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR,
				iovbuf, sizeof(iovbuf), TRUE, 0)) < 0) {
			DHD_ERROR(("[WIFI_SEC] %s: rsdb_mode ret= %d\n", __FUNCTION__, ret));
		} else {
			DHD_ERROR(("[WIFI_SEC] %s: rsdb_mode to MIMO(RSDB OFF) succeeded\n",
				__FUNCTION__));
		}
	}

	return ret;
}
开发者ID:MikeForeskin，项目名称:Vindicator-S6-MM，代码行数:55，代码来源:dhd_custom_sec.c


示例18: dhd_conf_get_country

int
dhd_conf_get_country(dhd_pub_t *dhd)
{
	int bcmerror = -1;
	wl_country_t cspec;

	memset(&cspec, 0, sizeof(wl_country_t));
	bcm_mkiovar("country", NULL, 0, (char*)&cspec, sizeof(wl_country_t));
	if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_GET_VAR, &cspec, sizeof(wl_country_t), FALSE, 0)) < 0)
		printf("%s: country code getting failed %d\n", __FUNCTION__, bcmerror);
	else
		printf("Country code: %s (%s/%d)\n", cspec.country_abbrev, cspec.ccode, cspec.rev);

	return bcmerror;
}
开发者ID:davidftv，项目名称:s82_kernel，代码行数:15，代码来源:dhd_config.c


示例19: dhd_force_disable_singlcore_scan

void
dhd_force_disable_singlcore_scan(dhd_pub_t *dhd)
{
	int ret = 0;
	struct file *fp = NULL;
	char *filepath = "/data/.cid.info";
	s8 iovbuf[WL_EVENTING_MASK_LEN + 12];
	char vender[10] = {0, };
	uint32 pm_bcnrx = 0;
	uint32 scan_ps = 0;

	if (BCM4354_CHIP_ID != dhd_bus_chip_id(dhd))
		return;

	fp = filp_open(filepath, O_RDONLY, 0);
	if (IS_ERR(fp)) {
		DHD_ERROR(("/data/.cid.info file open error\n"));
	} else {
		ret = kernel_read(fp, 0, (char *)vender, 5);

		if (ret > 0 && NULL != strstr(vender, "wisol")) {
			DHD_ERROR(("wisol module : set pm_bcnrx=0, set scan_ps=0\n"));

			bcm_mkiovar("pm_bcnrx", (char *)&pm_bcnrx, 4, iovbuf, sizeof(iovbuf));
			ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);
			if (ret < 0)
				DHD_ERROR(("Set pm_bcnrx error (%d)\n", ret));

			bcm_mkiovar("scan_ps", (char *)&scan_ps, 4, iovbuf, sizeof(iovbuf));
			ret = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0);
			if (ret < 0)
				DHD_ERROR(("Set scan_ps error (%d)\n", ret));
		}
		filp_close(fp, NULL);
	}
}
开发者ID:MikeForeskin，项目名称:Vindicator-S6-MM，代码行数:36，代码来源:dhd_custom_sec.c


示例20: dhd_conf_set_country

int
dhd_conf_set_country(dhd_pub_t *dhd)
{
	int bcmerror = -1;
	char iovbuf[WL_EVENTING_MASK_LEN + 12];	/*  Room for "event_msgs" + '\0' + bitvec  */
	
	memset(&dhd->dhd_cspec, 0, sizeof(wl_country_t));
	printf("%s: Set country %s, revision %d\n", __FUNCTION__,
		dhd->conf->cspec.ccode, dhd->conf->cspec.rev);
	bcm_mkiovar("country", (char *)&dhd->conf->cspec,
		sizeof(wl_country_t), iovbuf, sizeof(iovbuf));
	if ((bcmerror = dhd_wl_ioctl_cmd(dhd, WLC_SET_VAR, iovbuf, sizeof(iovbuf), TRUE, 0)) < 0)
		printf("%s: country code setting failed %d\n", __FUNCTION__, bcmerror);

	return bcmerror;
}
开发者ID:davidftv，项目名称:s82_kernel，代码行数:16，代码来源:dhd_config.c



注：本文中的dhd_wl_ioctl_cmd函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ di函数代码示例发布时间：2022-05-30
下一篇：
C++ dhd_customer_gpio_wlan_ctrl函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap