C++ device_detach函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中device_detach函数的典型用法代码示例。如果您正苦于以下问题：C++ device_detach函数的具体用法？C++ device_detach怎么用？C++ device_detach使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了device_detach函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: a10_ehci_detach

static int
a10_ehci_detach(device_t self)
{
	ehci_softc_t *sc = device_get_softc(self);
	device_t bdev;
	int err;
	uint32_t reg_value = 0;

	if (sc->sc_bus.bdev) {
		bdev = sc->sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(self, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(self);

	if (sc->sc_irq_res && sc->sc_intr_hdl) {
		/*
		 * only call ehci_detach() after ehci_init()
		 */
		ehci_detach(sc);

		err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);

		if (err)
			/* XXX or should we panic? */
			device_printf(self, "Could not tear down irq, %d\n",
			    err);
		sc->sc_intr_hdl = NULL;
	}

	if (sc->sc_irq_res) {
		bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
		sc->sc_irq_res = NULL;
	}
	if (sc->sc_io_res) {
		bus_release_resource(self, SYS_RES_MEMORY, 0,
		    sc->sc_io_res);
		sc->sc_io_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);

	/* Disable configure port */
	reg_value = A10_READ_4(sc, SW_SDRAM_REG_HPCR_USB2);
	reg_value &= ~SW_SDRAM_BP_HPCR_ACCESS;
	A10_WRITE_4(sc, SW_SDRAM_REG_HPCR_USB2, reg_value);

	/* Disable passby */
	reg_value = A10_READ_4(sc, SW_USB_PMU_IRQ_ENABLE);
	reg_value &= ~SW_AHB_INCR8; /* AHB INCR8 disable */
	reg_value &= ~SW_AHB_INCR4; /* AHB burst type INCR4 disable */
	reg_value &= ~SW_AHB_INCRX_ALIGN; /* AHB INCRX align disable */
	reg_value &= ~SW_ULPI_BYPASS; /* ULPI bypass disable */
	A10_WRITE_4(sc, SW_USB_PMU_IRQ_ENABLE, reg_value);

	/* Disable clock for USB */
	a10_clk_usb_deactivate();

	return (0);
}

开发者ID:MattDooner，项目名称:freebsd-west，代码行数:60，代码来源:a10_ehci.c

示例2: octusb_octeon_detach

static int
octusb_octeon_detach(device_t dev)
{
	struct octusb_octeon_softc *sc = device_get_softc(dev);
	device_t bdev;
	int err;

	if (sc->sc_dci.sc_bus.bdev) {
		bdev = sc->sc_dci.sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(dev, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(dev);

	if (sc->sc_dci.sc_irq_res && sc->sc_dci.sc_intr_hdl) {
		/*
		 * only call octusb_octeon_uninit() after octusb_octeon_init()
		 */
		octusb_uninit(&sc->sc_dci);

		err = bus_teardown_intr(dev, sc->sc_dci.sc_irq_res,
		    sc->sc_dci.sc_intr_hdl);
		sc->sc_dci.sc_intr_hdl = NULL;
	}
	if (sc->sc_dci.sc_irq_res) {
		bus_release_resource(dev, SYS_RES_IRQ, 0,
		    sc->sc_dci.sc_irq_res);
		sc->sc_dci.sc_irq_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_dci.sc_bus, NULL);

	return (0);
}

开发者ID:ppaeps，项目名称:freebsd-head，代码行数:34，代码来源:octusb_octeon.c

示例3: zy7_ehci_detach

static int
zy7_ehci_detach(device_t dev)
{
	ehci_softc_t *sc = device_get_softc(dev);

	sc->sc_flags &= ~EHCI_SCFLG_DONEINIT;

	if (device_is_attached(dev))
		bus_generic_detach(dev);

	if (sc->sc_irq_res && sc->sc_intr_hdl)
		/* call ehci_detach() after ehci_init() called after
		 * successful bus_setup_intr().
		 */
		ehci_detach(sc);
	if (sc->sc_bus.bdev) {
		device_detach(sc->sc_bus.bdev);
		device_delete_child(dev, sc->sc_bus.bdev);
	}
	if (sc->sc_irq_res) {
		if (sc->sc_intr_hdl != NULL)
			bus_teardown_intr(dev, sc->sc_irq_res,
					  sc->sc_intr_hdl);
		bus_release_resource(dev, SYS_RES_IRQ,
			     rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
	}

	if (sc->sc_io_res)
		bus_release_resource(dev, SYS_RES_MEMORY,
			     rman_get_rid(sc->sc_io_res), sc->sc_io_res);
	usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);

	return (0);
}

开发者ID:coyizumi，项目名称:cs111，代码行数:34，代码来源:zy7_ehci.c

示例4: acpi_dock_eject_child

static ACPI_STATUS
acpi_dock_eject_child(ACPI_HANDLE handle, UINT32 level, void *context,
    void **status)
{
	device_t	dock_dev, dev;
	ACPI_HANDLE	dock_handle;

	dock_dev = *(device_t *)context;
	dock_handle = acpi_get_handle(dock_dev);

	if (!acpi_dock_is_ejd_device(dock_handle, handle))
		goto out;

	ACPI_VPRINT(dock_dev, acpi_device_get_parent_softc(dock_dev),
	    "ejecting device for %s\n", acpi_name(handle));

	dev = acpi_get_device(handle);
	if (dev != NULL && device_is_attached(dev)) {
		mtx_lock(&Giant);
		device_detach(dev);
		mtx_unlock(&Giant);
	}

	acpi_SetInteger(handle, "_EJ0", 0);
out:
	return (AE_OK);
}

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:27，代码来源:acpi_dock.c

示例5: at91_udp_detach

static int
at91_udp_detach(device_t dev)
{
	struct at91_udp_softc *sc = device_get_softc(dev);
	device_t bdev;
	int err;

	if (sc->sc_dci.sc_bus.bdev) {
		bdev = sc->sc_dci.sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(dev, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(dev);

	USB_BUS_LOCK(&sc->sc_dci.sc_bus);
	callout_stop(&sc->sc_vbus);
	USB_BUS_UNLOCK(&sc->sc_dci.sc_bus);

	callout_drain(&sc->sc_vbus);

	/* disable Transceiver */
	AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_TXVC, AT91_UDP_TXVC_DIS);

	/* disable and clear all interrupts */
	AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_IDR, 0xFFFFFFFF);
	AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_ICR, 0xFFFFFFFF);

	if (sc->sc_dci.sc_irq_res && sc->sc_dci.sc_intr_hdl) {
		/*
		 * only call at91_udp_uninit() after at91_udp_init()
		 */
		at91dci_uninit(&sc->sc_dci);

		err = bus_teardown_intr(dev, sc->sc_dci.sc_irq_res,
		    sc->sc_dci.sc_intr_hdl);
		sc->sc_dci.sc_intr_hdl = NULL;
	}
	if (sc->sc_dci.sc_irq_res) {
		bus_release_resource(dev, SYS_RES_IRQ, 0,
		    sc->sc_dci.sc_irq_res);
		sc->sc_dci.sc_irq_res = NULL;
	}
	if (sc->sc_dci.sc_io_res) {
		bus_release_resource(dev, SYS_RES_MEMORY, MEM_RID,
		    sc->sc_dci.sc_io_res);
		sc->sc_dci.sc_io_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_dci.sc_bus, NULL);

	/* disable clocks */
	at91_pmc_clock_disable(sc->sc_iclk);
	at91_pmc_clock_disable(sc->sc_fclk);
	at91_pmc_clock_disable(sc->sc_mclk);
	at91_pmc_clock_deref(sc->sc_fclk);
	at91_pmc_clock_deref(sc->sc_iclk);
	at91_pmc_clock_deref(sc->sc_mclk);

	return (0);
}

开发者ID:JabirTech，项目名称:Source，代码行数:60，代码来源:at91dci_atmelarm.c

示例6: exynos_xhci_detach

static int
exynos_xhci_detach(device_t dev)
{
	struct exynos_xhci_softc *esc = device_get_softc(dev);
	device_t bdev;
	int err;

	if (esc->base.sc_bus.bdev != NULL) {
		bdev = esc->base.sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(dev, bdev);
	}
	/* During module unload there are lots of children leftover */
	device_delete_children(dev);

	xhci_halt_controller(&esc->base);
	
	if (esc->res[2] && esc->base.sc_intr_hdl) {
		err = bus_teardown_intr(dev, esc->res[2],
		    esc->base.sc_intr_hdl);
		if (err) {
			device_printf(dev, "Could not tear down IRQ,"
			    " %d\n", err);
			return (err);
		}
	}

	bus_release_resources(dev, exynos_xhci_spec, esc->res);

	xhci_uninit(&esc->base);
	
	return (0);
}

开发者ID:2asoft，项目名称:freebsd，代码行数:33，代码来源:exynos5_xhci.c

示例7: ohci_atmelarm_detach

static int
ohci_atmelarm_detach(device_t dev)
{
	struct at91_ohci_softc *sc = device_get_softc(dev);
	device_t bdev;
	int err;

	if (sc->sc_ohci.sc_bus.bdev) {
		bdev = sc->sc_ohci.sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(dev, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(dev);

	/*
	 * Put the controller into reset, then disable clocks and do
	 * the MI tear down.  We have to disable the clocks/hardware
	 * after we do the rest of the teardown.  We also disable the
	 * clocks in the opposite order we acquire them, but that
	 * doesn't seem to be absolutely necessary.  We free up the
	 * clocks after we disable them, so the system could, in
	 * theory, reuse them.
	 */
	bus_space_write_4(sc->sc_ohci.sc_io_tag, sc->sc_ohci.sc_io_hdl,
	    OHCI_CONTROL, 0);

	at91_pmc_clock_disable(sc->fclk);
	at91_pmc_clock_disable(sc->iclk);
	at91_pmc_clock_disable(sc->mclk);
	at91_pmc_clock_deref(sc->fclk);
	at91_pmc_clock_deref(sc->iclk);
	at91_pmc_clock_deref(sc->mclk);

	if (sc->sc_ohci.sc_irq_res && sc->sc_ohci.sc_intr_hdl) {
		/*
		 * only call ohci_detach() after ohci_init()
		 */
		ohci_detach(&sc->sc_ohci);

		err = bus_teardown_intr(dev, sc->sc_ohci.sc_irq_res, sc->sc_ohci.sc_intr_hdl);
		sc->sc_ohci.sc_intr_hdl = NULL;
	}
	if (sc->sc_ohci.sc_irq_res) {
		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_ohci.sc_irq_res);
		sc->sc_ohci.sc_irq_res = NULL;
	}
	if (sc->sc_ohci.sc_io_res) {
		bus_release_resource(dev, SYS_RES_MEMORY, MEM_RID,
		    sc->sc_ohci.sc_io_res);
		sc->sc_ohci.sc_io_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_ohci.sc_bus, &ohci_iterate_hw_softc);

	return (0);
}

开发者ID:2asoft，项目名称:freebsd，代码行数:56，代码来源:at91_ohci.c

示例8: device_free

void device_free(Device *d) {
        assert(d);

        device_detach(d);

        hashmap_remove(d->manager->devices, d->sysfs);

        free(d->sysfs);
        free(d);
}

开发者ID:Miss6yka，项目名称:systemd，代码行数:10，代码来源:logind-device.c

示例9: uhci_pci_detach

int
uhci_pci_detach(device_t self)
{
	uhci_softc_t *sc = device_get_softc(self);
	device_t bdev;

	if (sc->sc_bus.bdev) {
		bdev = sc->sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(self, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(self);

	/*
	 * disable interrupts that might have been switched on in
	 * uhci_init.
	 */
	if (sc->sc_io_res) {
		USB_BUS_LOCK(&sc->sc_bus);

		/* stop the controller */
		uhci_reset(sc);

		USB_BUS_UNLOCK(&sc->sc_bus);
	}
	pci_disable_busmaster(self);

	if (sc->sc_irq_res && sc->sc_intr_hdl) {
		int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);

		if (err) {
			/* XXX or should we panic? */
			device_printf(self, "Could not tear down irq, %d\n",
			    err);
		}
		sc->sc_intr_hdl = NULL;
	}
	if (sc->sc_irq_res) {
		bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
		sc->sc_irq_res = NULL;
	}
	if (sc->sc_io_res) {
		bus_release_resource(self, SYS_RES_IOPORT, PCI_UHCI_BASE_REG,
		    sc->sc_io_res);
		sc->sc_io_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_bus, &uhci_iterate_hw_softc);

	return (0);
}

开发者ID:cyrilmagsuci，项目名称:freebsd，代码行数:51，代码来源:uhci_pci.c

示例10: musbotg_detach

static int
musbotg_detach(device_t dev)
{
	struct musbotg_super_softc *sc = device_get_softc(dev);
	device_t bdev;
	int err;
	int i;

	for (i = 0; i < AM335X_USB_PORTS; i++) {
		if (sc->sc_otg[i].sc_bus.bdev) {
			bdev = sc->sc_otg[i].sc_bus.bdev;
			device_detach(bdev);
			device_delete_child(dev, bdev);
		}

		if (sc->sc_otg[i].sc_irq_res && sc->sc_otg[i].sc_intr_hdl) {
			/*
			 * only call musbotg_uninit() after musbotg_init()
			 */
			musbotg_uninit(&sc->sc_otg[i]);

			err = bus_teardown_intr(dev, sc->sc_otg[i].sc_irq_res,
			    sc->sc_otg[i].sc_intr_hdl);
			sc->sc_otg[i].sc_intr_hdl = NULL;
		}

		usb_bus_mem_free_all(&sc->sc_otg[i].sc_bus, NULL);
	}

	if (sc->sc_intr_hdl) {
	 	bus_teardown_intr(dev, sc->sc_irq_res[0],
		    sc->sc_intr_hdl);
		sc->sc_intr_hdl = NULL;
	}


	/* Free resources if any */
	if (sc->sc_mem_res[0])
		bus_release_resources(dev, am335x_musbotg_mem_spec,
		    sc->sc_mem_res);

	if (sc->sc_irq_res[0])
		bus_release_resources(dev, am335x_musbotg_irq_spec,
		    sc->sc_irq_res);

	/* during module unload there are lots of children leftover */
	device_delete_children(dev);

	return (0);
}

开发者ID:ChaosJohn，项目名称:freebsd，代码行数:50，代码来源:am335x_usbss.c

示例11: ehci_obio_detach

static int
ehci_obio_detach(device_t self)
{
	ehci_softc_t *sc = device_get_softc(self);
	device_t bdev;
	int err;

	if (sc->sc_bus.bdev) {
		bdev = sc->sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(self, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(self);

	if (sc->sc_irq_res && sc->sc_intr_hdl) {
		/*
		 * only call ehci_detach() after ehci_init()
		 */
		ehci_detach(sc);

		/* Stop EHCI clock */
		rt305x_sysctl_set(SYSCTL_CLKCFG1, 
		  rt305x_sysctl_get(SYSCTL_CLKCFG1) & 
		  ~(SYSCTL_CLKCFG1_UPHY0_CLK_EN
#ifdef MT7620
		    | SYSCTL_CLKCFG1_UPHY1_CLK_EN
#endif
		));

		err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
		if (err)
			device_printf(self, "Could not tear down irq, %d\n",
				err);
		sc->sc_intr_hdl = NULL;
	}
	if (sc->sc_irq_res) {
		bus_release_resource(self, SYS_RES_IRQ, 0,
		    sc->sc_irq_res);
		sc->sc_irq_res = NULL;
	}
	if (sc->sc_io_res) {
		bus_release_resource(self, SYS_RES_MEMORY, 0,
		    sc->sc_io_res);
		sc->sc_io_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);

	return (0);
}

开发者ID:2asoft，项目名称:freebsd，代码行数:50，代码来源:rt305x_ehci.c

示例12: device_attach

void device_attach(Device *d, Seat *s) {
        assert(d);
        assert(s);

        if (d->seat == s)
                return;

        if (d->seat)
                device_detach(d);

        d->seat = s;
        LIST_PREPEND(Device, devices, s->devices, d);

        seat_send_changed(s, "CanGraphical\0");
}

开发者ID:Miss6yka，项目名称:systemd，代码行数:15，代码来源:logind-device.c

示例13: puc_bfe_detach

int
puc_bfe_detach(device_t dev)
{
	struct puc_bar *bar;
	struct puc_port *port;
	struct puc_softc *sc;
	int error, idx;

	sc = device_get_softc(dev);

	/* Detach our children. */
	error = 0;
	for (idx = 0; idx < sc->sc_nports; idx++) {
		port = &sc->sc_port[idx];
		if (port->p_dev == NULL)
			continue;
		if (device_detach(port->p_dev) == 0) {
			device_delete_child(dev, port->p_dev);
			if (port->p_rres != NULL)
				rman_release_resource(port->p_rres);
			if (port->p_ires != NULL)
				rman_release_resource(port->p_ires);
		} else
			error = ENXIO;
	}
	if (error)
		return (error);

	if (sc->sc_serdevs != 0UL)
		bus_teardown_intr(dev, sc->sc_ires, sc->sc_icookie);
	bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irid, sc->sc_ires);

	for (idx = 0; idx < PUC_PCI_BARS; idx++) {
		bar = &sc->sc_bar[idx];
		if (bar->b_res != NULL)
			bus_release_resource(sc->sc_dev, bar->b_type,
			    bar->b_rid, bar->b_res);
	}

	rman_fini(&sc->sc_irq);
	free(__DECONST(void *, sc->sc_irq.rm_descr), M_PUC);
	rman_fini(&sc->sc_iomem);
	free(__DECONST(void *, sc->sc_iomem.rm_descr), M_PUC);
	rman_fini(&sc->sc_ioport);
	free(__DECONST(void *, sc->sc_ioport.rm_descr), M_PUC);
	free(sc->sc_port, M_PUC);
	return (0);
}

开发者ID:dcui，项目名称:FreeBSD-9.3_kernel，代码行数:48，代码来源:puc.c

示例14: ar71xx_ehci_detach

static int
ar71xx_ehci_detach(device_t self)
{
	struct ar71xx_ehci_softc *isc = device_get_softc(self);
	ehci_softc_t *sc = &isc->base;
	device_t bdev;
	int err;

 	if (sc->sc_bus.bdev) {
		bdev = sc->sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(self, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(self);

 	if (sc->sc_irq_res && sc->sc_intr_hdl) {
		/*
		 * only call ehci_detach() after ehci_init()
		 */
		ehci_detach(sc);

		err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);

		if (err)
			/* XXX or should we panic? */
			device_printf(self, "Could not tear down irq, %d\n",
			    err);
		sc->sc_intr_hdl = NULL;
	}

 	if (sc->sc_irq_res) {
		bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
		sc->sc_irq_res = NULL;
	}
	if (sc->sc_io_res) {
		bus_release_resource(self, SYS_RES_MEMORY, 0,
		    sc->sc_io_res);
		sc->sc_io_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);

	return (0);
}

开发者ID:cyrilmagsuci，项目名称:freebsd，代码行数:44，代码来源:ar71xx_ehci.c

示例15: dotg_obio_detach

static int
dotg_obio_detach(device_t dev)
{
	struct dotg_obio_softc *sc = device_get_softc(dev);
	device_t bdev;
	int err;

	if (sc->sc_dci.sc_bus.bdev) {
		bdev = sc->sc_dci.sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(dev, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(dev);

	if (sc->sc_dci.sc_irq_res && sc->sc_dci.sc_intr_hdl) {
		/*
		 * only call dotg_obio_uninit() after dotg_obio_init()
		 */
		dotg_uninit(&sc->sc_dci);

		/* Stop OTG clock */
		rt305x_sysctl_set(SYSCTL_CLKCFG1, 
		    rt305x_sysctl_get(SYSCTL_CLKCFG1) & 
		    ~SYSCTL_CLKCFG1_OTG_CLK_EN);

		err = bus_teardown_intr(dev, sc->sc_dci.sc_irq_res,
		    sc->sc_dci.sc_intr_hdl);
		sc->sc_dci.sc_intr_hdl = NULL;
	}
	if (sc->sc_dci.sc_irq_res) {
		bus_release_resource(dev, SYS_RES_IRQ, 0,
		    sc->sc_dci.sc_irq_res);
		sc->sc_dci.sc_irq_res = NULL;
	}
	if (sc->sc_dci.sc_mem_res) {
		bus_release_resource(dev, SYS_RES_MEMORY, 0,
		    sc->sc_dci.sc_mem_res);
		sc->sc_dci.sc_mem_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_dci.sc_bus, NULL);

	return (0);
}

开发者ID:BillTheBest，项目名称:libuinet，代码行数:44，代码来源:rt305x_dotg.c

示例16: xhci_pci_detach

static int
xhci_pci_detach(device_t self)
{
	struct xhci_softc *sc = device_get_softc(self);
	device_t bdev;

	if (sc->sc_bus.bdev != NULL) {
		bdev = sc->sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(self, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(self);

	if (sc->sc_io_res) {
		usb_callout_drain(&sc->sc_callout);
		xhci_halt_controller(sc);
	}

	pci_disable_busmaster(self);

	if (sc->sc_irq_res && sc->sc_intr_hdl) {
		bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
		sc->sc_intr_hdl = NULL;
	}
	if (sc->sc_irq_res) {
		if (sc->sc_irq_rid == 1)
			pci_release_msi(self);
		bus_release_resource(self, SYS_RES_IRQ, sc->sc_irq_rid,
		    sc->sc_irq_res);
		sc->sc_irq_res = NULL;
	}
	if (sc->sc_io_res) {
		bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM,
		    sc->sc_io_res);
		sc->sc_io_res = NULL;
	}

	xhci_uninit(sc);

	return (0);
}

开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:42，代码来源:xhci_pci.c

示例17: ohci_ec_detach

static int
ohci_ec_detach(device_t dev)
{
	struct ec_ohci_softc *sc = device_get_softc(dev);
	device_t bdev;
	int err;

	if (sc->sc_ohci.sc_bus.bdev) {
		bdev = sc->sc_ohci.sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(dev, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(dev);

	bus_space_write_4(sc->sc_ohci.sc_io_tag, sc->sc_ohci.sc_io_hdl,
	    OHCI_CONTROL, 0);

	if (sc->sc_ohci.sc_irq_res && sc->sc_ohci.sc_intr_hdl) {
		/*
		 * only call ohci_detach() after ohci_init()
		 */
		ohci_detach(&sc->sc_ohci);

		err = bus_teardown_intr(dev, sc->sc_ohci.sc_irq_res,
		    sc->sc_ohci.sc_intr_hdl);
		sc->sc_ohci.sc_intr_hdl = NULL;
	}
	if (sc->sc_ohci.sc_irq_res) {
		bus_release_resource(dev, SYS_RES_IRQ, 0,
		    sc->sc_ohci.sc_irq_res);
		sc->sc_ohci.sc_irq_res = NULL;
	}
	if (sc->sc_ohci.sc_io_res) {
		bus_release_resource(dev, SYS_RES_MEMORY, MEM_RID,
		    sc->sc_ohci.sc_io_res);
		sc->sc_ohci.sc_io_res = NULL;
	}
	usb_bus_mem_free_all(&sc->sc_ohci.sc_bus, &ohci_iterate_hw_softc);

	return (0);
}

开发者ID:Alkzndr，项目名称:freebsd，代码行数:42，代码来源:ohci_ec.c

示例18: ehci_xls_detach

static int
ehci_xls_detach(device_t self)
{
	ehci_softc_t *sc = device_get_softc(self);
	device_t bdev;
	int err;

 	if (sc->sc_bus.bdev) {
		bdev = sc->sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(self, bdev);
	}
	/* during module unload there are lots of children leftover */
	device_delete_children(self);

	if (sc->sc_irq_res && sc->sc_intr_hdl) {
		ehci_detach(sc);

		err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
		if (err)
			device_printf(self, "Could not tear down irq, %d\n",
			    err);
		sc->sc_intr_hdl = 0;
	}

	if (sc->sc_irq_res) {
		bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
		sc->sc_irq_res = NULL;
	}
	if (sc->sc_io_res) {
		bus_release_resource(self, SYS_RES_MEMORY, 0,
		    sc->sc_io_res);
		sc->sc_io_res = NULL;
		sc->sc_io_tag = 0;
		sc->sc_io_hdl = 0;
	}

	usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);

	return (0);
}

开发者ID:BillTheBest，项目名称:libuinet，代码行数:41，代码来源:xls_ehci.c

示例19: xhci_detach

static int
xhci_detach(device_t dev)
{
	struct xhci_softc *sc = device_get_softc(dev);
	device_t bdev;
	int err;

	if (sc->sc_bus.bdev != NULL) {
		bdev = sc->sc_bus.bdev;
		device_detach(bdev);
		device_delete_child(dev, bdev);
	}

	/* during module unload there are lots of children leftover */
	device_delete_children(dev);

	if (sc->sc_irq_res != NULL && sc->sc_intr_hdl != NULL) {
		err = bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intr_hdl);
		if (err != 0)
			device_printf(dev, "Could not tear down irq, %d\n",
			    err);
		sc->sc_intr_hdl = NULL;
	}

	if (sc->sc_irq_res != NULL) {
		bus_release_resource(dev, SYS_RES_IRQ,
		    rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
		sc->sc_irq_res = NULL;
	}

	if (sc->sc_io_res != NULL) {
		bus_release_resource(dev, SYS_RES_MEMORY,
		    rman_get_rid(sc->sc_io_res), sc->sc_io_res);
		sc->sc_io_res = NULL;
	}

	xhci_uninit(sc);

	return (0);
}

开发者ID:2asoft，项目名称:freebsd，代码行数:40，代码来源:xhci_mv.c

示例20: ehci_oxu_detach

int
ehci_oxu_detach(device_t self)
{
  ehci_softc_t *sc = device_get_softc(self);
  device_t bdev;

  if (sc->sc_bus.bdev) {
    bdev = sc->sc_bus.bdev;
    device_detach(bdev);
    device_delete_child(self, bdev);
  }
  /* during module unload there are lots of children leftover */
  device_delete_all_children(self);

  oxu210_intr_detach (oxu210_intr_shc);
  
  ehci_detach(sc);

  usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);

  return (0);
}

开发者ID:wsoltys，项目名称:pacedev，代码行数:22，代码来源:ehci_oxu210.c

注：本文中的device_detach函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ device_find_child函数代码示例发布时间：2022-05-30

C++ device_destroy函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19251|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8649|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ device_detach函数代码示例

示例1: a10_ehci_detach

示例2: octusb_octeon_detach

示例3: zy7_ehci_detach

示例4: acpi_dock_eject_child

示例5: at91_udp_detach

示例6: exynos_xhci_detach

示例7: ohci_atmelarm_detach

示例8: device_free

示例9: uhci_pci_detach

示例10: musbotg_detach

示例11: ehci_obio_detach

示例12: device_attach

示例13: puc_bfe_detach

示例14: ar71xx_ehci_detach

示例15: dotg_obio_detach

示例16: xhci_pci_detach

示例17: ohci_ec_detach

示例18: ehci_xls_detach

示例19: xhci_detach

示例20: ehci_oxu_detach

请发表评论

全部评论

上一篇：

下一篇：

mikepj/XRG: System monitor for macOS.

appreciated/maven-springboot-electron: P

CVE-2022-36620

宽字符std::wstring的长度和大小问题？size

krishnakapil/MaterialSeachView: Android

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053