C++ dev_wlc_bufvar_set函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中dev_wlc_bufvar_set函数的典型用法代码示例。如果您正苦于以下问题：C++ dev_wlc_bufvar_set函数的具体用法？C++ dev_wlc_bufvar_set怎么用？C++ dev_wlc_bufvar_set使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了dev_wlc_bufvar_set函数的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: wl_cfg80211_bt_setflag

static void
wl_cfg80211_bt_setflag(struct net_device *dev, bool set)
{
#if defined(BT_DHCP_USE_FLAGS)
	char buf_flag7_dhcp_on[8] = { 7, 00, 00, 00, 0x1, 0x0, 0x00, 0x00 };
	char buf_flag7_default[8]   = { 7, 00, 00, 00, 0x0, 0x00, 0x00, 0x00};
#endif


#if defined(BT_DHCP_eSCO_FIX)
	/* set = 1, save & turn on  0 - off & restore prev settings */
	set_btc_esco_params(dev, set);
#endif

#if defined(BT_DHCP_USE_FLAGS)
	WL_TRACE(("WI-FI priority boost via bt flags, set:%d\n", set));
	if (set == TRUE)
		/* Forcing bt_flag7  */
		dev_wlc_bufvar_set(dev, "btc_flags",
			(char *)&buf_flag7_dhcp_on[0],
			sizeof(buf_flag7_dhcp_on));
	else
		/* Restoring default bt flag7 */
		dev_wlc_bufvar_set(dev, "btc_flags",
			(char *)&buf_flag7_default[0],
			sizeof(buf_flag7_default));
#endif
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:28，代码来源:dhd_cfg80211.c

示例2: wl_cfg80211_bt_setflag

static void
wl_cfg80211_bt_setflag(struct net_device *dev, bool set)
{
#if defined(BT_DHCP_USE_FLAGS)
	char buf_flag7_dhcp_on[8] = { 7, 00, 00, 00, 0x1, 0x0, 0x00, 0x00 };
	char buf_flag7_default[8]   = { 7, 00, 00, 00, 0x0, 0x00, 0x00, 0x00};
#endif
	int bt_coex = 0;


#if defined(BT_DHCP_eSCO_FIX)
	
	set_btc_esco_params(dev, set);
#endif

#if defined(BT_DHCP_USE_FLAGS)
	WL_TRACE(("WI-FI priority boost via bt flags, set:%d\n", set));
	if (set == TRUE) {
		
		dev_wlc_bufvar_set(dev, "btc_flags",
			(char *)&buf_flag7_dhcp_on[0],
			sizeof(buf_flag7_dhcp_on));
		wldev_iovar_setint(dev, "btc_mode", bt_coex);
	} else {
		
		dev_wlc_bufvar_set(dev, "btc_flags",
			(char *)&buf_flag7_default[0],
			sizeof(buf_flag7_default));
		bt_coex = 1;
		wldev_iovar_setint(dev, "btc_mode", bt_coex);
    }
#endif
}

开发者ID:hyuh，项目名称:m7-wls，代码行数:33，代码来源:dhd_cfg80211.c

示例3: dev_wlc_intvar_set_reg

/*
get named driver variable to uint register value and return error indication
calling example: dev_wlc_intvar_set_reg(dev, "btc_params",66, value)
*/
static int
dev_wlc_intvar_set_reg(struct net_device *dev, char *name, char *addr, char * val)
{
	char reg_addr[8];

	memset(reg_addr, 0, sizeof(reg_addr));
	memcpy((char *)&reg_addr[0], (char *)addr, 4);
	memcpy((char *)&reg_addr[4], (char *)val, 4);

	return (dev_wlc_bufvar_set(dev, name, (char *)&reg_addr[0], sizeof(reg_addr)));
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:15，代码来源:dhd_cfg80211.c

示例4: dev_wlc_intvar_set_reg

/*
get named driver variable to uint register value and return error indication
calling example: dev_wlc_intvar_set_reg(dev, "btc_params",66, value)
*/
static int
dev_wlc_intvar_set_reg(struct net_device *dev, char *name, char *addr, char * val)
{
	char reg_addr[8];

	DHD_MYTRACE(("%s-%s\n", __FILE__, __FUNCTION__));

	memset(reg_addr, 0, sizeof(reg_addr));
	memcpy((char *)&reg_addr[0], (char *)addr, 4);
	memcpy((char *)&reg_addr[4], (char *)val, 4);

	return (dev_wlc_bufvar_set(dev, name, (char *)&reg_addr[0], sizeof(reg_addr)));
}

开发者ID:devil1437，项目名称:Nexus4Wifi，代码行数:17，代码来源:dhd_cfg80211.c

示例5: wl_cfg80211_set_btcoex_dhcp

int wl_cfg80211_set_btcoex_dhcp(struct net_device *dev, char *command)
{

	struct wl_priv *wl = wlcfg_drv_priv;
	char powermode_val = 0;
	char buf_reg66va_dhcp_on[8] = { 66, 00, 00, 00, 0x10, 0x27, 0x00, 0x00 };
	char buf_reg41va_dhcp_on[8] = { 41, 00, 00, 00, 0x33, 0x00, 0x00, 0x00 };
	char buf_reg68va_dhcp_on[8] = { 68, 00, 00, 00, 0x90, 0x01, 0x00, 0x00 };

	uint32 regaddr;
	static uint32 saved_reg66;
	static uint32 saved_reg41;
	static uint32 saved_reg68;
	static bool saved_status = FALSE;

#ifdef COEX_DHCP
	char buf_flag7_default[8] =   { 7, 00, 00, 00, 0x0, 0x00, 0x00, 0x00};
	struct btcoex_info *btco_inf = wl->btcoex_info;
#endif /* COEX_DHCP */

#ifdef PKT_FILTER_SUPPORT
	dhd_pub_t *dhd =  (dhd_pub_t *)(wl->pub);
#endif

	/* Figure out powermode 1 or o command */
	strncpy((char *)&powermode_val, command + strlen("BTCOEXMODE") +1, 1);

	if (strnicmp((char *)&powermode_val, "1", strlen("1")) == 0) {
		WL_TRACE_HW4(("DHCP session starts\n"));


#ifdef PKT_FILTER_SUPPORT
		dhd->dhcp_in_progress = 1;

		if (dhd->early_suspended) {
			WL_TRACE_HW4(("DHCP in progressing , disable packet filter!!!\n"));
			dhd_enable_packet_filter(0, dhd);
		}
#endif

		/* Retrieve and saved orig regs value */
		if ((saved_status == FALSE) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 66,  &saved_reg66)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 41,  &saved_reg41)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 68,  &saved_reg68)))   {
				saved_status = TRUE;
				WL_TRACE(("Saved 0x%x 0x%x 0x%x\n",
					saved_reg66, saved_reg41, saved_reg68));

				/* Disable PM mode during dhpc session */

				/* Disable PM mode during dhpc session */
#ifdef COEX_DHCP
				/* Start  BT timer only for SCO connection */
				if (btcoex_is_sco_active(dev)) {
					/* btc_params 66 */
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg66va_dhcp_on[0],
						sizeof(buf_reg66va_dhcp_on));
					/* btc_params 41 0x33 */
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg41va_dhcp_on[0],
						sizeof(buf_reg41va_dhcp_on));
					/* btc_params 68 0x190 */
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg68va_dhcp_on[0],
						sizeof(buf_reg68va_dhcp_on));
					saved_status = TRUE;

					btco_inf->bt_state = BT_DHCP_START;
					btco_inf->timer_on = 1;
					mod_timer(&btco_inf->timer, btco_inf->timer.expires);
					WL_TRACE(("enable BT DHCP Timer\n"));
				}
#endif /* COEX_DHCP */
		}
		else if (saved_status == TRUE) {
			WL_ERR(("was called w/o DHCP OFF. Continue\n"));
		}
	}
	else if (strnicmp((char *)&powermode_val, "2", strlen("2")) == 0) {



#ifdef PKT_FILTER_SUPPORT
		dhd->dhcp_in_progress = 0;
		WL_TRACE_HW4(("DHCP is complete \n"));

		/* Enable packet filtering */
		if (dhd->early_suspended) {
			WL_TRACE_HW4(("DHCP is complete , enable packet filter!!!\n"));
			dhd_enable_packet_filter(1, dhd);
		}
#endif /* PKT_FILTER_SUPPORT */

		/* Restoring PM mode */

#ifdef COEX_DHCP
		/* Stop any bt timer because DHCP session is done */
		WL_TRACE(("disable BT DHCP Timer\n"));
//.........这里部分代码省略.........

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:101，代码来源:dhd_cfg80211.c

示例6: set_btc_esco_params

/* Enhanced BT COEX settings for eSCO compatibility during DHCP window */
static int set_btc_esco_params(struct net_device *dev, bool trump_sco)
{
	static bool saved_status = FALSE;

	char buf_reg50va_dhcp_on[8] =
		{ 50, 00, 00, 00, 0x22, 0x80, 0x00, 0x00 };
	char buf_reg51va_dhcp_on[8] =
		{ 51, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
	char buf_reg64va_dhcp_on[8] =
		{ 64, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
	char buf_reg65va_dhcp_on[8] =
		{ 65, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
	char buf_reg71va_dhcp_on[8] =
		{ 71, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
	uint32 regaddr;
	static uint32 saved_reg50;
	static uint32 saved_reg51;
	static uint32 saved_reg64;
	static uint32 saved_reg65;
	static uint32 saved_reg71;

	if (trump_sco) {
		/* this should reduce eSCO agressive retransmit
		 * w/o breaking it
		 */

		/* 1st save current */
		WL_TRACE(("Do new SCO/eSCO coex algo {save &"
			  "override}\n"));
		if ((!dev_wlc_intvar_get_reg(dev, "btc_params", 50, &saved_reg50)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 51, &saved_reg51)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 64, &saved_reg64)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 65, &saved_reg65)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 71, &saved_reg71))) {
			saved_status = TRUE;
			WL_TRACE(("saved bt_params[50,51,64,65,71]:"
				  "0x%x 0x%x 0x%x 0x%x 0x%x\n",
				  saved_reg50, saved_reg51,
				  saved_reg64, saved_reg65, saved_reg71));
		} else {
			WL_ERR((":%s: save btc_params failed\n",
				__FUNCTION__));
			saved_status = FALSE;
			return -1;
		}

		WL_TRACE(("override with [50,51,64,65,71]:"
			  "0x%x 0x%x 0x%x 0x%x 0x%x\n",
			  *(u32 *)(buf_reg50va_dhcp_on+4),
			  *(u32 *)(buf_reg51va_dhcp_on+4),
			  *(u32 *)(buf_reg64va_dhcp_on+4),
			  *(u32 *)(buf_reg65va_dhcp_on+4),
			  *(u32 *)(buf_reg71va_dhcp_on+4)));

		dev_wlc_bufvar_set(dev, "btc_params",
			(char *)&buf_reg50va_dhcp_on[0], 8);
		dev_wlc_bufvar_set(dev, "btc_params",
			(char *)&buf_reg51va_dhcp_on[0], 8);
		dev_wlc_bufvar_set(dev, "btc_params",
			(char *)&buf_reg64va_dhcp_on[0], 8);
		dev_wlc_bufvar_set(dev, "btc_params",
			(char *)&buf_reg65va_dhcp_on[0], 8);
		dev_wlc_bufvar_set(dev, "btc_params",
			(char *)&buf_reg71va_dhcp_on[0], 8);

		saved_status = TRUE;
	} else if (saved_status) {
		/* restore previously saved bt params */
		WL_TRACE(("Do new SCO/eSCO coex algo {save &"
			  "override}\n"));

		regaddr = 50;
		dev_wlc_intvar_set_reg(dev, "btc_params",
			(char *)&regaddr, (char *)&saved_reg50);
		regaddr = 51;
		dev_wlc_intvar_set_reg(dev, "btc_params",
			(char *)&regaddr, (char *)&saved_reg51);
		regaddr = 64;
		dev_wlc_intvar_set_reg(dev, "btc_params",
			(char *)&regaddr, (char *)&saved_reg64);
		regaddr = 65;
		dev_wlc_intvar_set_reg(dev, "btc_params",
			(char *)&regaddr, (char *)&saved_reg65);
		regaddr = 71;
		dev_wlc_intvar_set_reg(dev, "btc_params",
			(char *)&regaddr, (char *)&saved_reg71);

		WL_TRACE(("restore bt_params[50,51,64,65,71]:"
			"0x%x 0x%x 0x%x 0x%x 0x%x\n",
			saved_reg50, saved_reg51, saved_reg64,
			saved_reg65, saved_reg71));

		saved_status = FALSE;
	} else {
		WL_ERR((":%s att to restore not saved BTCOEX params\n",
			__FUNCTION__));
		return -1;
	}
	return 0;
//.........这里部分代码省略.........

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:101，代码来源:dhd_cfg80211.c

示例7: wl_cfg80211_set_btcoex_dhcp

int wl_cfg80211_set_btcoex_dhcp(struct net_device *dev, char *command)
{

	struct wl_priv *wl = wlcfg_drv_priv;
#ifndef OEM_ANDROID
	static int  pm = PM_FAST;
	int  pm_local = PM_OFF;
#endif /* OEM_ANDROID */
	char powermode_val = 0;
	char buf_reg66va_dhcp_on[8] = { 66, 00, 00, 00, 0x10, 0x27, 0x00, 0x00 };
	char buf_reg41va_dhcp_on[8] = { 41, 00, 00, 00, 0x33, 0x00, 0x00, 0x00 };
	char buf_reg68va_dhcp_on[8] = { 68, 00, 00, 00, 0x90, 0x01, 0x00, 0x00 };

	uint32 regaddr;
	static uint32 saved_reg66;
	static uint32 saved_reg41;
	static uint32 saved_reg68;
	static bool saved_status = FALSE;

#ifdef COEX_DHCP
	char buf_flag7_default[8] =   { 7, 00, 00, 00, 0x0, 0x00, 0x00, 0x00};
	struct btcoex_info *btco_inf = wl->btcoex_info;
#endif /* COEX_DHCP */

	/* Figure out powermode 1 or o command */
#ifdef  OEM_ANDROID
	strncpy((char *)&powermode_val, command + strlen("BTCOEXMODE") +1, 1);
#else
	strncpy((char *)&powermode_val, command + strlen("POWERMODE") +1, 1);
#endif

	if (strnicmp((char *)&powermode_val, "1", strlen("1")) == 0) {

		WL_TRACE(("%s: DHCP session starts\n", __FUNCTION__));

		/* Retrieve and saved orig regs value */
		if ((saved_status == FALSE) &&
#ifndef OEM_ANDROID
			(!dev_wlc_ioctl(dev, WLC_GET_PM, &pm, sizeof(pm))) &&
#endif
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 66,  &saved_reg66)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 41,  &saved_reg41)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 68,  &saved_reg68)))   {
				saved_status = TRUE;
				WL_TRACE(("Saved 0x%x 0x%x 0x%x\n",
					saved_reg66, saved_reg41, saved_reg68));

				/* Disable PM mode during dhpc session */
#ifndef OEM_ANDROID
				dev_wlc_ioctl(dev, WLC_SET_PM, &pm_local, sizeof(pm_local));
#endif

				/* Disable PM mode during dhpc session */
#ifdef COEX_DHCP
				/* Start  BT timer only for SCO connection */
				if (btcoex_is_sco_active(dev)) {
					/* btc_params 66 */
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg66va_dhcp_on[0],
						sizeof(buf_reg66va_dhcp_on));
					/* btc_params 41 0x33 */
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg41va_dhcp_on[0],
						sizeof(buf_reg41va_dhcp_on));
					/* btc_params 68 0x190 */
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg68va_dhcp_on[0],
						sizeof(buf_reg68va_dhcp_on));
					saved_status = TRUE;

					btco_inf->bt_state = BT_DHCP_START;
					btco_inf->timer_on = 1;
					mod_timer(&btco_inf->timer, btco_inf->timer.expires);
					WL_TRACE(("%s enable BT DHCP Timer\n",
					__FUNCTION__));
				}
#endif /* COEX_DHCP */
		}
		else if (saved_status == TRUE) {
			WL_ERR(("%s was called w/o DHCP OFF. Continue\n", __FUNCTION__));
		}
	}
#ifdef  OEM_ANDROID
	else if (strnicmp((char *)&powermode_val, "2", strlen("2")) == 0) {
#else
	else if (strnicmp((char *)&powermode_val, "0", strlen("0")) == 0) {
#endif


		/* Restoring PM mode */
#ifndef OEM_ANDROID
		dev_wlc_ioctl(dev, WLC_SET_PM, &pm, sizeof(pm));
#endif

#ifdef COEX_DHCP
		/* Stop any bt timer because DHCP session is done */
		WL_TRACE(("%s disable BT DHCP Timer\n", __FUNCTION__));
		if (btco_inf->timer_on) {
			btco_inf->timer_on = 0;
			del_timer_sync(&btco_inf->timer);
//.........这里部分代码省略.........

开发者ID:agat63，项目名称:N861_ZTE_kernel，代码行数:101，代码来源:dhd_cfg80211.c

示例8: wl_cfg80211_set_btcoex_dhcp

int wl_cfg80211_set_btcoex_dhcp(struct net_device *dev, char *command)
{

	struct wl_priv *wl = wlcfg_drv_priv;
	char powermode_val = 0;
	char buf_reg66va_dhcp_on[8] = { 66, 00, 00, 00, 0x10, 0x27, 0x00, 0x00 };
	char buf_reg41va_dhcp_on[8] = { 41, 00, 00, 00, 0x33, 0x00, 0x00, 0x00 };
	char buf_reg68va_dhcp_on[8] = { 68, 00, 00, 00, 0x90, 0x01, 0x00, 0x00 };

	uint32 regaddr;
	static uint32 saved_reg66;
	static uint32 saved_reg41;
	static uint32 saved_reg68;
	static bool saved_status = FALSE;

#ifdef COEX_DHCP
	char buf_flag7_default[8] =   { 7, 00, 00, 00, 0x0, 0x00, 0x00, 0x00};
	struct btcoex_info *btco_inf = wl->btcoex_info;
#endif 

#ifdef PKT_FILTER_SUPPORT
	dhd_pub_t *dhd =  (dhd_pub_t *)(wl->pub);
#endif

	
	strncpy((char *)&powermode_val, command + strlen("BTCOEXMODE") +1, 1);

	if (strnicmp((char *)&powermode_val, "1", strlen("1")) == 0) {
		WL_TRACE_HW4(("%s: DHCP session starts\n", __FUNCTION__));

#ifdef PKT_FILTER_SUPPORT
		dhd->dhcp_in_progress = 1;

		if (dhd->early_suspended) {
			WL_TRACE_HW4(("DHCP in progressing , disable packet filter!!!\n"));
			dhd_enable_packet_filter(0, dhd);
		}
#endif

		
		if ((saved_status == FALSE) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 66,  &saved_reg66)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 41,  &saved_reg41)) &&
			(!dev_wlc_intvar_get_reg(dev, "btc_params", 68,  &saved_reg68)))   {
				saved_status = TRUE;
				WL_TRACE(("Saved 0x%x 0x%x 0x%x\n",
					saved_reg66, saved_reg41, saved_reg68));

				

				
#ifdef COEX_DHCP
				
				if (btcoex_is_sco_active(dev)) {
					
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg66va_dhcp_on[0],
						sizeof(buf_reg66va_dhcp_on));
					
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg41va_dhcp_on[0],
						sizeof(buf_reg41va_dhcp_on));
					
					dev_wlc_bufvar_set(dev, "btc_params",
						(char *)&buf_reg68va_dhcp_on[0],
						sizeof(buf_reg68va_dhcp_on));
					saved_status = TRUE;

					btco_inf->bt_state = BT_DHCP_START;
					btco_inf->timer_on = 1;
					btco_inf->dhcp_done = 0;
					mod_timer(&btco_inf->timer, jiffies + msecs_to_jiffies(BT_DHCP_OPPR_WIN_TIME));
					WL_TRACE(("%s enable BT DHCP Timer\n",
					__FUNCTION__));
				}
#endif 
		}
		else if (saved_status == TRUE) {
			WL_ERR(("%s was called w/o DHCP OFF. Continue\n", __FUNCTION__));
		}
	}
	else if (strnicmp((char *)&powermode_val, "2", strlen("2")) == 0) {


#ifdef PKT_FILTER_SUPPORT
		dhd->dhcp_in_progress = 0;
		WL_TRACE_HW4(("%s: DHCP is complete \n", __FUNCTION__));

		
		if (dhd->early_suspended) {
			WL_TRACE_HW4(("DHCP is complete , enable packet filter!!!\n"));
			dhd_enable_packet_filter(1, dhd);
		}
#endif

		

#ifdef COEX_DHCP
		
		WL_TRACE(("%s disable BT DHCP Timer\n", __FUNCTION__));
//.........这里部分代码省略.........

开发者ID:hyuh，项目名称:m7-wls，代码行数:101，代码来源:dhd_cfg80211.c

注：本文中的dev_wlc_bufvar_set函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ devattach函数代码示例发布时间：2022-05-30

C++ dev_warn函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8650|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ dev_wlc_bufvar_set函数代码示例

示例1: wl_cfg80211_bt_setflag

示例2: wl_cfg80211_bt_setflag

示例3: dev_wlc_intvar_set_reg

示例4: dev_wlc_intvar_set_reg

示例5: wl_cfg80211_set_btcoex_dhcp

示例6: set_btc_esco_params

示例7: wl_cfg80211_set_btcoex_dhcp

示例8: wl_cfg80211_set_btcoex_dhcp

请发表评论

全部评论

上一篇：

下一篇：

受精卵着床有什么症状(女人备孕成功的5大症

krishnaik06/Machine-Learning-in-90-days

Delphi中TwwDBLookupCombo中属性的简单设置

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053