C++ dev_uc_del函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中dev_uc_del函数的典型用法代码示例。如果您正苦于以下问题：C++ dev_uc_del函数的具体用法？C++ dev_uc_del怎么用？C++ dev_uc_del使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了dev_uc_del函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: dsa_slave_close

static int dsa_slave_close(struct net_device *dev)
{
	struct dsa_slave_priv *p = netdev_priv(dev);
	struct net_device *master = p->parent->dst->master_netdev;
	struct dsa_switch *ds = p->parent;

	if (p->phy)
		phy_stop(p->phy);

	dev_mc_unsync(master, dev);
	dev_uc_unsync(master, dev);
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(master, -1);
	if (dev->flags & IFF_PROMISC)
		dev_set_promiscuity(master, -1);

	if (!ether_addr_equal(dev->dev_addr, master->dev_addr))
		dev_uc_del(master, dev->dev_addr);

	if (ds->drv->port_disable)
		ds->drv->port_disable(ds, p->port, p->phy);

	if (ds->drv->port_stp_update)
		ds->drv->port_stp_update(ds, p->port, BR_STATE_DISABLED);

	return 0;
}

开发者ID:andy-shev，项目名称:linux，代码行数:27，代码来源:slave.c

示例2: dsa_slave_set_mac_address

static int dsa_slave_set_mac_address(struct net_device *dev, void *a)
{
	struct dsa_slave_priv *p = netdev_priv(dev);
	struct net_device *master = p->parent->dst->master_netdev;
	struct sockaddr *addr = a;
	int err;

	if (!is_valid_ether_addr(addr->sa_data))
		return -EADDRNOTAVAIL;

	if (!(dev->flags & IFF_UP))
		goto out;

	if (!ether_addr_equal(addr->sa_data, master->dev_addr)) {
		err = dev_uc_add(master, addr->sa_data);
		if (err < 0)
			return err;
	}

	if (!ether_addr_equal(dev->dev_addr, master->dev_addr))
		dev_uc_del(master, dev->dev_addr);

out:
	ether_addr_copy(dev->dev_addr, addr->sa_data);

	return 0;
}

开发者ID:andy-shev，项目名称:linux，代码行数:27，代码来源:slave.c

示例3: vlan_dev_set_mac_address

static int vlan_dev_set_mac_address(struct net_device *dev, void *p)
{
	struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
	struct sockaddr *addr = p;
	int err;

	if (!is_valid_ether_addr(addr->sa_data))
		return -EADDRNOTAVAIL;

	if (!(dev->flags & IFF_UP))
		goto out;

	if (compare_ether_addr(addr->sa_data, real_dev->dev_addr)) {
		err = dev_uc_add(real_dev, addr->sa_data);
		if (err < 0)
			return err;
	}

	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
		dev_uc_del(real_dev, dev->dev_addr);

out:
	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
	return 0;
}

开发者ID:kronenpj，项目名称:samsung-s3c6410-android.2.0，代码行数:25，代码来源:vlan_dev.c

示例4: dsa_slave_open

static int dsa_slave_open(struct net_device *dev)
{
	struct dsa_slave_priv *p = netdev_priv(dev);
	struct net_device *master = p->parent->dst->master_netdev;
	struct dsa_switch *ds = p->parent;
	u8 stp_state = dsa_port_is_bridged(p) ?
			BR_STATE_BLOCKING : BR_STATE_FORWARDING;
	int err;

	if (!(master->flags & IFF_UP))
		return -ENETDOWN;

	if (!ether_addr_equal(dev->dev_addr, master->dev_addr)) {
		err = dev_uc_add(master, dev->dev_addr);
		if (err < 0)
			goto out;
	}

	if (dev->flags & IFF_ALLMULTI) {
		err = dev_set_allmulti(master, 1);
		if (err < 0)
			goto del_unicast;
	}
	if (dev->flags & IFF_PROMISC) {
		err = dev_set_promiscuity(master, 1);
		if (err < 0)
			goto clear_allmulti;
	}

	if (ds->drv->port_enable) {
		err = ds->drv->port_enable(ds, p->port, p->phy);
		if (err)
			goto clear_promisc;
	}

	if (ds->drv->port_stp_update)
		ds->drv->port_stp_update(ds, p->port, stp_state);

	if (p->phy)
		phy_start(p->phy);

	return 0;

clear_promisc:
	if (dev->flags & IFF_PROMISC)
		dev_set_promiscuity(master, -1);
clear_allmulti:
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(master, -1);
del_unicast:
	if (!ether_addr_equal(dev->dev_addr, master->dev_addr))
		dev_uc_del(master, dev->dev_addr);
out:
	return err;
}

开发者ID:andy-shev，项目名称:linux，代码行数:55，代码来源:slave.c

示例5: vlan_dev_open

static int vlan_dev_open(struct net_device *dev)
{
	struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
	struct net_device *real_dev = vlan->real_dev;
	int err;

	if (!(real_dev->flags & IFF_UP) &&
	    !(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
		return -ENETDOWN;

	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr) &&
	    !vlan_dev_inherit_address(dev, real_dev)) {
		err = dev_uc_add(real_dev, dev->dev_addr);
		if (err < 0)
			goto out;
	}

	if (dev->flags & IFF_ALLMULTI) {
		err = dev_set_allmulti(real_dev, 1);
		if (err < 0)
			goto del_unicast;
	}
	if (dev->flags & IFF_PROMISC) {
		err = dev_set_promiscuity(real_dev, 1);
		if (err < 0)
			goto clear_allmulti;
	}

	ether_addr_copy(vlan->real_dev_addr, real_dev->dev_addr);

	if (vlan->flags & VLAN_FLAG_GVRP)
		vlan_gvrp_request_join(dev);

	if (vlan->flags & VLAN_FLAG_MVRP)
		vlan_mvrp_request_join(dev);

	if (netif_carrier_ok(real_dev) &&
	    !(vlan->flags & VLAN_FLAG_BRIDGE_BINDING))
		netif_carrier_on(dev);
	return 0;

clear_allmulti:
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(real_dev, -1);
del_unicast:
	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
		dev_uc_del(real_dev, dev->dev_addr);
out:
	netif_carrier_off(dev);
	return err;
}

开发者ID:avagin，项目名称:linux，代码行数:51，代码来源:vlan_dev.c

示例6: dsa_slave_close

static int dsa_slave_close(struct net_device *dev)
{
	struct dsa_slave_priv *p = netdev_priv(dev);
	struct net_device *master = p->parent->dst->master_netdev;

	dev_mc_unsync(master, dev);
	dev_uc_unsync(master, dev);
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(master, -1);
	if (dev->flags & IFF_PROMISC)
		dev_set_promiscuity(master, -1);

	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
		dev_uc_del(master, dev->dev_addr);

	return 0;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:17，代码来源:slave.c

示例7: vlan_dev_open

static int vlan_dev_open(struct net_device *dev)
{
	struct vlan_dev_info *vlan = vlan_dev_info(dev);
	struct net_device *real_dev = vlan->real_dev;
	int err;

	if (!(real_dev->flags & IFF_UP) &&
	    !(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
		return -ENETDOWN;

	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) {
		err = dev_uc_add(real_dev, dev->dev_addr);
		if (err < 0)
			goto out;
	}

	if (dev->flags & IFF_ALLMULTI) {
		err = dev_set_allmulti(real_dev, 1);
		if (err < 0)
			goto del_unicast;
	}
	if (dev->flags & IFF_PROMISC) {
		err = dev_set_promiscuity(real_dev, 1);
		if (err < 0)
			goto clear_allmulti;
	}

	memcpy(vlan->real_dev_addr, real_dev->dev_addr, ETH_ALEN);

	if (vlan->flags & VLAN_FLAG_GVRP)
		vlan_gvrp_request_join(dev);

	netif_carrier_on(dev);
	return 0;

clear_allmulti:
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(real_dev, -1);
del_unicast:
	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
		dev_uc_del(real_dev, dev->dev_addr);
out:
	netif_carrier_off(dev);
	return err;
}

开发者ID:kronenpj，项目名称:samsung-s3c6410-android.2.0，代码行数:45，代码来源:vlan_dev.c

示例8: vlan_dev_stop

static int vlan_dev_stop(struct net_device *dev)
{
	struct vlan_dev_info *vlan = vlan_dev_info(dev);
	struct net_device *real_dev = vlan->real_dev;

	dev_mc_unsync(real_dev, dev);
	dev_uc_unsync(real_dev, dev);
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(real_dev, -1);
	if (dev->flags & IFF_PROMISC)
		dev_set_promiscuity(real_dev, -1);

	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
		dev_uc_del(real_dev, dev->dev_addr);

	netif_carrier_off(dev);
	return 0;
}

开发者ID:jing-git，项目名称:rt-n56u，代码行数:18，代码来源:vlan_dev.c

示例9: vlan_sync_address

static void vlan_sync_address(struct net_device *dev,
			      struct net_device *vlandev)
{
	struct vlan_dev_priv *vlan = vlan_dev_priv(vlandev);

	
	if (!compare_ether_addr(vlan->real_dev_addr, dev->dev_addr))
		return;

	if (compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
	    !compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
		dev_uc_del(dev, vlandev->dev_addr);

	if (!compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
	    compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
		dev_uc_add(dev, vlandev->dev_addr);

	memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:19，代码来源:vlan.c

示例10: vlan_dev_stop

static int vlan_dev_stop(struct net_device *dev)
{
	struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
	struct net_device *real_dev = vlan->real_dev;

	dev_mc_unsync(real_dev, dev);
	dev_uc_unsync(real_dev, dev);
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(real_dev, -1);
	if (dev->flags & IFF_PROMISC)
		dev_set_promiscuity(real_dev, -1);

	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
		dev_uc_del(real_dev, dev->dev_addr);

	if (!(vlan->flags & VLAN_FLAG_BRIDGE_BINDING))
		netif_carrier_off(dev);
	return 0;
}

开发者ID:avagin，项目名称:linux，代码行数:19，代码来源:vlan_dev.c

示例11: vlan_sync_address

static void vlan_sync_address(struct net_device *dev,
			      struct net_device *vlandev)
{
	struct vlan_dev_priv *vlan = vlan_dev_priv(vlandev);

	/* May be called without an actual change */
	if (!compare_ether_addr(vlan->real_dev_addr, dev->dev_addr))
		return;

	/* vlan address was different from the old address and is equal to
	 * the new address */
	if (compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
	    !compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
		dev_uc_del(dev, vlandev->dev_addr);

	/* vlan address was equal to the old address and is different from
	 * the new address */
	if (!compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
	    compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
		dev_uc_add(dev, vlandev->dev_addr);

	memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}

开发者ID:PterX，项目名称:rt-n56u，代码行数:23，代码来源:vlan.c

示例12: dsa_slave_open

static int dsa_slave_open(struct net_device *dev)
{
	struct dsa_slave_priv *p = netdev_priv(dev);
	struct net_device *master = p->parent->dst->master_netdev;
	int err;

	if (!(master->flags & IFF_UP))
		return -ENETDOWN;

	if (compare_ether_addr(dev->dev_addr, master->dev_addr)) {
		err = dev_uc_add(master, dev->dev_addr);
		if (err < 0)
			goto out;
	}

	if (dev->flags & IFF_ALLMULTI) {
		err = dev_set_allmulti(master, 1);
		if (err < 0)
			goto del_unicast;
	}
	if (dev->flags & IFF_PROMISC) {
		err = dev_set_promiscuity(master, 1);
		if (err < 0)
			goto clear_allmulti;
	}

	return 0;

clear_allmulti:
	if (dev->flags & IFF_ALLMULTI)
		dev_set_allmulti(master, -1);
del_unicast:
	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
		dev_uc_del(master, dev->dev_addr);
out:
	return err;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:37，代码来源:slave.c

注：本文中的dev_uc_del函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ dev_vdbg函数代码示例发布时间：2022-05-30

C++ dev_to_zram函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8650|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ dev_uc_del函数代码示例

示例1: dsa_slave_close

示例2: dsa_slave_set_mac_address

示例3: vlan_dev_set_mac_address

示例4: dsa_slave_open

示例5: vlan_dev_open

示例6: dsa_slave_close

示例7: vlan_dev_open

示例8: vlan_dev_stop

示例9: vlan_sync_address

示例10: vlan_dev_stop

示例11: vlan_sync_address

示例12: dsa_slave_open

请发表评论

全部评论

上一篇：

下一篇：

受精卵着床有什么症状(女人备孕成功的5大症

krishnaik06/Machine-Learning-in-90-days

Delphi中TwwDBLookupCombo中属性的简单设置

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053