• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ dev_printk函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中dev_printk函数的典型用法代码示例。如果您正苦于以下问题:C++ dev_printk函数的具体用法?C++ dev_printk怎么用?C++ dev_printk使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了dev_printk函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: optidma_init_one

static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	static const struct ata_port_info info_82c700 = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
		.mwdma_mask = ATA_MWDMA2,
		.port_ops = &optidma_port_ops
	};
	static const struct ata_port_info info_82c700_udma = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
		.mwdma_mask = ATA_MWDMA2,
		.udma_mask = ATA_UDMA2,
		.port_ops = &optiplus_port_ops
	};
	const struct ata_port_info *ppi[] = { &info_82c700, NULL };
	static int printed_version;
	int rc;

	if (!printed_version++)
		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");

	rc = pcim_enable_device(dev);
	if (rc)
		return rc;

	/* Fixed location chipset magic */
	inw(0x1F1);
	inw(0x1F1);
	pci_clock = inb(0x1F5) & 1;		/* 0 = 33Mhz, 1 = 25Mhz */

	if (optiplus_with_udma(dev))
		ppi[0] = &info_82c700_udma;

	return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
}
开发者ID:mikeberkelaar,项目名称:grhardened,代码行数:36,代码来源:pata_optidma.c


示例2: find_source_device

/**
 * find_source_device - search through device hierarchy for source device
 * @parent: pointer to Root Port pci_dev data structure
 * @e_info: including detailed error information such like id
 *
 * Return true if found.
 *
 * Invoked by DPC when error is detected at the Root Port.
 * Caller of this function must set id, severity, and multi_error_valid of
 * struct aer_err_info pointed by @e_info properly.  This function must fill
 * e_info->error_dev_num and e_info->dev[], based on the given information.
 */
static bool find_source_device(struct pci_dev *parent,
		struct aer_err_info *e_info)
{
	struct pci_dev *dev = parent;
	int result;

	/* Must reset in this function */
	e_info->error_dev_num = 0;

	/* Is Root Port an agent that sends error message? */
	result = find_device_iter(dev, e_info);
	if (result)
		return true;

	pci_walk_bus(parent->subordinate, find_device_iter, e_info);

	if (!e_info->error_dev_num) {
		dev_printk(KERN_DEBUG, &parent->dev,
				"can't find device of ID%04x\n",
				e_info->id);
		return false;
	}
	return true;
}
开发者ID:7799,项目名称:linux,代码行数:36,代码来源:aerdrv_core.c


示例3: platform_get_resource_byname

void __iomem *etnaviv_ioremap(struct platform_device *pdev, const char *name,
		const char *dbgname)
{
	struct resource *res;
	void __iomem *ptr;

	if (name)
		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
	else
		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	ptr = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(ptr)) {
		dev_err(&pdev->dev, "failed to ioremap %s: %ld\n", name,
			PTR_ERR(ptr));
		return ptr;
	}

	if (reglog)
		dev_printk(KERN_DEBUG, &pdev->dev, "IO:region %s 0x%p %08zx\n",
			   dbgname, ptr, (size_t)resource_size(res));

	return ptr;
}
开发者ID:JamesChenFromChina,项目名称:linux,代码行数:24,代码来源:etnaviv_drv.c


示例4: ns87415_init_one

static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
    static int printed_version;
    static const struct ata_port_info info = {
        .flags		= ATA_FLAG_SLAVE_POSS,
        .pio_mask	= ATA_PIO4,
        .mwdma_mask	= ATA_MWDMA2,
        .port_ops	= &ns87415_pata_ops,
    };
    const struct ata_port_info *ppi[] = { &info, NULL };
    int rc;
#if defined(CONFIG_SUPERIO)
    static const struct ata_port_info info87560 = {
        .flags		= ATA_FLAG_SLAVE_POSS,
        .pio_mask	= ATA_PIO4,
        .mwdma_mask	= ATA_MWDMA2,
        .port_ops	= &ns87560_pata_ops,
    };

    if (PCI_SLOT(pdev->devfn) == 0x0E)
        ppi[0] = &info87560;
#endif
    if (!printed_version++)
        dev_printk(KERN_DEBUG, &pdev->dev,
                   "version " DRV_VERSION "\n");

    rc = pcim_enable_device(pdev);
    if (rc)
        return rc;

    /* Select 512 byte sectors */
    pci_write_config_byte(pdev, 0x55, 0xEE);
    /* Select PIO0 8bit clocking */
    pci_write_config_byte(pdev, 0x54, 0xB7);
    return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
}
开发者ID:chunyenho,项目名称:RTS-hw2,代码行数:36,代码来源:pata_ns87415.c


示例5: svia_configure

static void svia_configure(struct pci_dev *pdev, int board_id)
{
	u8 tmp8;

	pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
	dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
	       (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);

	/* make sure SATA channels are enabled */
	pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
	if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
		dev_printk(KERN_DEBUG, &pdev->dev,
			   "enabling SATA channels (0x%x)\n",
			   (int) tmp8);
		tmp8 |= ALL_PORTS;
		pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
	}

	/* make sure interrupts for each channel sent to us */
	pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
	if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
		dev_printk(KERN_DEBUG, &pdev->dev,
			   "enabling SATA channel interrupts (0x%x)\n",
			   (int) tmp8);
		tmp8 |= ALL_PORTS;
		pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
	}

	/* make sure native mode is enabled */
	pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
	if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
		dev_printk(KERN_DEBUG, &pdev->dev,
			   "enabling SATA channel native mode (0x%x)\n",
			   (int) tmp8);
		tmp8 |= NATIVE_MODE_ALL;
		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
	}

	/*
	 * vt6420/1 has problems talking to some drives.  The following
	 * is the fix from Joseph Chan <[email protected]>.
	 *
	 * When host issues HOLD, device may send up to 20DW of data
	 * before acknowledging it with HOLDA and the host should be
	 * able to buffer them in FIFO.  Unfortunately, some WD drives
	 * send upto 40DW before acknowledging HOLD and, in the
	 * default configuration, this ends up overflowing vt6421's
	 * FIFO, making the controller abort the transaction with
	 * R_ERR.
	 *
	 * Rx52[2] is the internal 128DW FIFO Flow control watermark
	 * adjusting mechanism enable bit and the default value 0
	 * means host will issue HOLD to device when the left FIFO
	 * size goes below 32DW.  Setting it to 1 makes the watermark
	 * 64DW.
	 *
	 * https://bugzilla.kernel.org/show_bug.cgi?id=15173
	 * http://article.gmane.org/gmane.linux.ide/46352
	 * http://thread.gmane.org/gmane.linux.kernel/1062139
	 */
	if (board_id == vt6420 || board_id == vt6421) {
		pci_read_config_byte(pdev, 0x52, &tmp8);
		tmp8 |= 1 << 2;
		pci_write_config_byte(pdev, 0x52, tmp8);
	}
}
开发者ID:3null,项目名称:fastsocket,代码行数:66,代码来源:sata_via.c


示例6: piix4_setup

static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
				const struct pci_device_id *id)
{
	unsigned char temp;

	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
	    (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
		srvrworks_csb5_delay = 1;

	/* On some motherboards, it was reported that accessing the SMBus
	   caused severe hardware problems */
	if (dmi_check_system(piix4_dmi_blacklist)) {
		dev_err(&PIIX4_dev->dev,
			"Accessing the SMBus on this system is unsafe!\n");
		return -EPERM;
	}

	/* Don't access SMBus on IBM systems which get corrupted eeproms */
	if (dmi_check_system(piix4_dmi_ibm) &&
			PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
		dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
			"may corrupt your serial eeprom! Refusing to load "
			"module!\n");
		return -EPERM;
	}

	/* Determine the address of the SMBus areas */
	if (force_addr) {
		piix4_smba = force_addr & 0xfff0;
		force = 0;
	} else {
		pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
		piix4_smba &= 0xfff0;
		if(piix4_smba == 0) {
			dev_err(&PIIX4_dev->dev, "SMBus base address "
				"uninitialized - upgrade BIOS or use "
				"force_addr=0xaddr\n");
			return -ENODEV;
		}
	}

	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
		return -ENODEV;

	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
			piix4_smba);
		return -EBUSY;
	}

	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);

	/* If force_addr is set, we program the new address here. Just to make
	   sure, we disable the PIIX4 first. */
	if (force_addr) {
		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
		pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
		dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
			"new address %04x!\n", piix4_smba);
	} else if ((temp & 1) == 0) {
		if (force) {
			/* This should never need to be done, but has been
			 * noted that many Dell machines have the SMBus
			 * interface on the PIIX4 disabled!? NOTE: This assumes
			 * I/O space and other allocations WERE done by the
			 * Bios!  Don't complain if your hardware does weird
			 * things after enabling this. :') Check for Bios
			 * updates before resorting to this.
			 */
			pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
					      temp | 1);
			dev_printk(KERN_NOTICE, &PIIX4_dev->dev,
				"WARNING: SMBus interface has been "
				"FORCEFULLY ENABLED!\n");
		} else {
			dev_err(&PIIX4_dev->dev,
				"Host SMBus controller not enabled!\n");
			release_region(piix4_smba, SMBIOSIZE);
			piix4_smba = 0;
			return -ENODEV;
		}
	}

	if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
		dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
	else if ((temp & 0x0E) == 0)
		dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
	else
		dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
			"(or code out of date)!\n");

	pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
	dev_info(&PIIX4_dev->dev,
		 "SMBus Host Controller at 0x%x, revision %d\n",
		 piix4_smba, temp);

	return 0;
}
开发者ID:0xroot,项目名称:Blackphone-BP1-Kernel,代码行数:99,代码来源:i2c-piix4.c


示例7: pm8001_task_exec


//.........这里部分代码省略.........
					pm8001_printk("device %d not ready.\n",
					pm8001_dev->device_id));
			} else {
				PM8001_IO_DBG(pm8001_ha,
					pm8001_printk("device %016llx not "
					"ready.\n", SAS_ADDR(dev->sas_addr)));
			}
			rc = SAS_PHY_DOWN;
			goto out_done;
		}
		port = &pm8001_ha->port[sas_find_local_port_id(dev)];
		if (!port->port_attached) {
			if (sas_protocol_ata(t->task_proto)) {
				struct task_status_struct *ts = &t->task_status;
				ts->resp = SAS_TASK_UNDELIVERED;
				ts->stat = SAS_PHY_DOWN;

				spin_unlock_irqrestore(&pm8001_ha->lock, flags);
				spin_unlock_irqrestore(dev->sata_dev.ap->lock,
						flags_libsas);
				t->task_done(t);
				spin_lock_irqsave(dev->sata_dev.ap->lock,
					flags_libsas);
				spin_lock_irqsave(&pm8001_ha->lock, flags);
				if (n > 1)
					t = list_entry(t->list.next,
							struct sas_task, list);
				continue;
			} else {
				struct task_status_struct *ts = &t->task_status;
				ts->resp = SAS_TASK_UNDELIVERED;
				ts->stat = SAS_PHY_DOWN;
				t->task_done(t);
				if (n > 1)
					t = list_entry(t->list.next,
							struct sas_task, list);
				continue;
			}
		}
		rc = pm8001_tag_alloc(pm8001_ha, &tag);
		if (rc)
			goto err_out;
		ccb = &pm8001_ha->ccb_info[tag];

		if (!sas_protocol_ata(t->task_proto)) {
			if (t->num_scatter) {
				n_elem = dma_map_sg(pm8001_ha->dev,
					t->scatter,
					t->num_scatter,
					t->data_dir);
				if (!n_elem) {
					rc = -ENOMEM;
					goto err_out_tag;
				}
			}
		} else {
			n_elem = t->num_scatter;
		}

		t->lldd_task = ccb;
		ccb->n_elem = n_elem;
		ccb->ccb_tag = tag;
		ccb->task = t;
		switch (t->task_proto) {
		case SAS_PROTOCOL_SMP:
			rc = pm8001_task_prep_smp(pm8001_ha, ccb);
			break;
		case SAS_PROTOCOL_SSP:
			if (is_tmf)
				rc = pm8001_task_prep_ssp_tm(pm8001_ha,
					ccb, tmf);
			else
				rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
			break;
		case SAS_PROTOCOL_SATA:
		case SAS_PROTOCOL_STP:
		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
			rc = pm8001_task_prep_ata(pm8001_ha, ccb);
			break;
		default:
			dev_printk(KERN_ERR, pm8001_ha->dev,
				"unknown sas_task proto: 0x%x\n",
				t->task_proto);
			rc = -EINVAL;
			break;
		}

		if (rc) {
			PM8001_IO_DBG(pm8001_ha,
				pm8001_printk("rc is %x\n", rc));
			goto err_out_tag;
		}
		/* TODO: select normal or high priority */
		spin_lock(&t->task_state_lock);
		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
		spin_unlock(&t->task_state_lock);
		pm8001_dev->running_req++;
		if (n > 1)
			t = list_entry(t->list.next, struct sas_task, list);
	} while (--n);
开发者ID:12rafael,项目名称:jellytimekernel,代码行数:101,代码来源:pm8001_sas.c


示例8: asihpi_adapter_probe

int asihpi_adapter_probe(struct pci_dev *pci_dev,
			 const struct pci_device_id *pci_id)
{
	int idx, nm;
	int adapter_index;
	unsigned int memlen;
	struct hpi_message hm;
	struct hpi_response hr;
	struct hpi_adapter adapter;
	struct hpi_pci pci;

	memset(&adapter, 0, sizeof(adapter));

	dev_printk(KERN_DEBUG, &pci_dev->dev,
		"probe %04x:%04x,%04x:%04x,%04x\n", pci_dev->vendor,
		pci_dev->device, pci_dev->subsystem_vendor,
		pci_dev->subsystem_device, pci_dev->devfn);

	if (pci_enable_device(pci_dev) < 0) {
		dev_err(&pci_dev->dev,
			"pci_enable_device failed, disabling device\n");
		return -EIO;
	}

	pci_set_master(pci_dev);	/* also sets latency timer if < 16 */

	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM,
		HPI_SUBSYS_CREATE_ADAPTER);
	hpi_init_response(&hr, HPI_OBJ_SUBSYSTEM, HPI_SUBSYS_CREATE_ADAPTER,
		HPI_ERROR_PROCESSING_MESSAGE);

	hm.adapter_index = HPI_ADAPTER_INDEX_INVALID;

	nm = HPI_MAX_ADAPTER_MEM_SPACES;

	for (idx = 0; idx < nm; idx++) {
		HPI_DEBUG_LOG(INFO, "resource %d %pR\n", idx,
			&pci_dev->resource[idx]);

		if (pci_resource_flags(pci_dev, idx) & IORESOURCE_MEM) {
			memlen = pci_resource_len(pci_dev, idx);
			pci.ap_mem_base[idx] =
				ioremap(pci_resource_start(pci_dev, idx),
				memlen);
			if (!pci.ap_mem_base[idx]) {
				HPI_DEBUG_LOG(ERROR,
					"ioremap failed, aborting\n");
				/* unmap previously mapped pci mem space */
				goto err;
			}
		}
	}

	pci.pci_dev = pci_dev;
	hm.u.s.resource.bus_type = HPI_BUS_PCI;
	hm.u.s.resource.r.pci = &pci;

	/* call CreateAdapterObject on the relevant hpi module */
	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL);
	if (hr.error)
		goto err;

	adapter_index = hr.u.s.adapter_index;
	adapter.adapter = hpi_find_adapter(adapter_index);

	if (prealloc_stream_buf) {
		adapter.p_buffer = vmalloc(prealloc_stream_buf);
		if (!adapter.p_buffer) {
			HPI_DEBUG_LOG(ERROR,
				"HPI could not allocate "
				"kernel buffer size %d\n",
				prealloc_stream_buf);
			goto err;
		}
	}

	hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER,
		HPI_ADAPTER_OPEN);
	hm.adapter_index = adapter.adapter->index;
	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL);

	if (hr.error)
		goto err;

	/* WARNING can't init mutex in 'adapter'
	 * and then copy it to adapters[] ?!?!
	 */
	adapters[adapter_index] = adapter;
	mutex_init(&adapters[adapter_index].mutex);
	pci_set_drvdata(pci_dev, &adapters[adapter_index]);

	dev_info(&pci_dev->dev, "probe succeeded for ASI%04X HPI index %d\n",
		 adapter.adapter->type, adapter_index);

	return 0;

err:
	for (idx = 0; idx < HPI_MAX_ADAPTER_MEM_SPACES; idx++) {
		if (pci.ap_mem_base[idx]) {
			iounmap(pci.ap_mem_base[idx]);
//.........这里部分代码省略.........
开发者ID:AD5GB,项目名称:kernel_n5_3.10-experimental,代码行数:101,代码来源:hpioctl.c


示例9: mpcore_wdt_probe

static int __devinit mpcore_wdt_probe(struct platform_device *dev)
{
	struct mpcore_wdt *wdt;
	struct resource *res;
	int ret;

	/* We only accept one device, and it must have an id of -1 */
	if (dev->id != -1)
		return -ENODEV;

	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
	if (!res) {
		ret = -ENODEV;
		goto err_out;
	}

	wdt = kmalloc(sizeof(struct mpcore_wdt), GFP_KERNEL);
	if (!wdt) {
		ret = -ENOMEM;
		goto err_out;
	}
	memset(wdt, 0, sizeof(struct mpcore_wdt));

	wdt->dev = &dev->dev;
	wdt->irq = platform_get_irq(dev, 0);
	if (wdt->irq < 0) {
		ret = -ENXIO;
		goto err_free;
	}
	wdt->base = ioremap(res->start, res->end - res->start + 1);
	if (!wdt->base) {
		ret = -ENOMEM;
		goto err_free;
	}

	mpcore_wdt_miscdev.dev = &dev->dev;
	ret = misc_register(&mpcore_wdt_miscdev);
	if (ret) {
		dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n",
			   WATCHDOG_MINOR, ret);
		goto err_misc;
	}

	ret = request_irq(wdt->irq, mpcore_wdt_fire, SA_INTERRUPT, "mpcore_wdt", wdt);
	if (ret) {
		dev_printk(KERN_ERR, _dev, "cannot register IRQ%d for watchdog\n", wdt->irq);
		goto err_irq;
	}

	mpcore_wdt_stop(wdt);
	platform_set_drvdata(&dev->dev, wdt);
	mpcore_wdt_dev = dev;

	return 0;

 err_irq:
	misc_deregister(&mpcore_wdt_miscdev);
 err_misc:
	iounmap(wdt->base);
 err_free:
	kfree(wdt);
 err_out:
	return ret;
}
开发者ID:BackupTheBerlios,项目名称:arp2-svn,代码行数:64,代码来源:mpcore_wdt.c


示例10: cs5520_init_one

static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
	static const unsigned int cmd_port[] = { 0x1F0, 0x170 };
	static const unsigned int ctl_port[] = { 0x3F6, 0x376 };
	struct ata_port_info pi = {
		.flags		= ATA_FLAG_SLAVE_POSS,
		.pio_mask	= 0x1f,
		.port_ops	= &cs5520_port_ops,
	};
	const struct ata_port_info *ppi[2];
	u8 pcicfg;
	void __iomem *iomap[5];
	struct ata_host *host;
	struct ata_ioports *ioaddr;
	int i, rc;

	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	/* IDE port enable bits */
	pci_read_config_byte(pdev, 0x60, &pcicfg);

	/* Check if the ATA ports are enabled */
	if ((pcicfg & 3) == 0)
		return -ENODEV;

	ppi[0] = ppi[1] = &ata_dummy_port_info;
	if (pcicfg & 1)
		ppi[0] = &pi;
	if (pcicfg & 2)
		ppi[1] = &pi;

	if ((pcicfg & 0x40) == 0) {
		dev_printk(KERN_WARNING, &pdev->dev,
			   "DMA mode disabled. Enabling.\n");
		pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
	}

	pi.mwdma_mask = id->driver_data;

	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
	if (!host)
		return -ENOMEM;

	/* Perform set up for DMA */
	if (pci_enable_device_bars(pdev, 1<<2)) {
		printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
		return -ENODEV;
	}

	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
		printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
		return -ENODEV;
	}
	if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
		printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
		return -ENODEV;
	}

	/* Map IO ports and initialize host accordingly */
	iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8);
	iomap[1] = devm_ioport_map(&pdev->dev, ctl_port[0], 1);
	iomap[2] = devm_ioport_map(&pdev->dev, cmd_port[1], 8);
	iomap[3] = devm_ioport_map(&pdev->dev, ctl_port[1], 1);
	iomap[4] = pcim_iomap(pdev, 2, 0);

	if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
		return -ENOMEM;

	ioaddr = &host->ports[0]->ioaddr;
	ioaddr->cmd_addr = iomap[0];
	ioaddr->ctl_addr = iomap[1];
	ioaddr->altstatus_addr = iomap[1];
	ioaddr->bmdma_addr = iomap[4];
	ata_sff_std_ports(ioaddr);

	ata_port_desc(host->ports[0],
		      "cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]);
	ata_port_pbar_desc(host->ports[0], 4, 0, "bmdma");

	ioaddr = &host->ports[1]->ioaddr;
	ioaddr->cmd_addr = iomap[2];
	ioaddr->ctl_addr = iomap[3];
	ioaddr->altstatus_addr = iomap[3];
	ioaddr->bmdma_addr = iomap[4] + 8;
	ata_sff_std_ports(ioaddr);

	ata_port_desc(host->ports[1],
		      "cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]);
	ata_port_pbar_desc(host->ports[1], 4, 8, "bmdma");

	/* activate the host */
	pci_set_master(pdev);
	rc = ata_host_start(host);
	if (rc)
		return rc;

	for (i = 0; i < 2; i++) {
		static const int irq[] = { 14, 15 };
//.........这里部分代码省略.........
开发者ID:xf739645524,项目名称:kernel-rhel5,代码行数:101,代码来源:pata_cs5520.c


示例11: setup_resource

static acpi_status
setup_resource(struct acpi_resource *acpi_res, void *data)
{
	struct pci_root_info *info = data;
	struct resource *res;
	struct acpi_resource_address64 addr;
	acpi_status status;
	unsigned long flags;
	u64 start, orig_end, end;

	status = resource_to_addr(acpi_res, &addr);
	if (!ACPI_SUCCESS(status))
		return AE_OK;

	if (addr.resource_type == ACPI_MEMORY_RANGE) {
		flags = IORESOURCE_MEM;
		if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
			flags |= IORESOURCE_PREFETCH;
	} else if (addr.resource_type == ACPI_IO_RANGE) {
		flags = IORESOURCE_IO;
	} else
		return AE_OK;

	start = addr.minimum + addr.translation_offset;
	orig_end = end = addr.maximum + addr.translation_offset;

	/* Exclude non-addressable range or non-addressable portion of range */
	end = min(end, (u64)iomem_resource.end);
	if (end <= start) {
		dev_info(&info->bridge->dev,
			"host bridge window [%#llx-%#llx] "
			"(ignored, not CPU addressable)\n", start, orig_end);
		return AE_OK;
	} else if (orig_end != end) {
		dev_info(&info->bridge->dev,
			"host bridge window [%#llx-%#llx] "
			"([%#llx-%#llx] ignored, not CPU addressable)\n",
			start, orig_end, end + 1, orig_end);
	}

	res = &info->res[info->res_num];
	res->name = info->name;
	res->flags = flags;
	res->start = start;
	res->end = end;
	res->child = NULL;

	if (!pci_use_crs) {
		dev_printk(KERN_DEBUG, &info->bridge->dev,
			   "host bridge window %pR (ignored)\n", res);
		return AE_OK;
	}

	info->res_num++;
	if (addr.translation_offset)
		dev_info(&info->bridge->dev, "host bridge window %pR "
			 "(PCI address [%#llx-%#llx])\n",
			 res, res->start - addr.translation_offset,
			 res->end - addr.translation_offset);
	else
		dev_info(&info->bridge->dev, "host bridge window %pR\n", res);

	return AE_OK;
}
开发者ID:Astinj,项目名称:linux_samsung_ics_real,代码行数:64,代码来源:acpi.c


示例12: hpt3x3_init_one

static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
	static int printed_version;
	static const struct ata_port_info info = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
#if defined(CONFIG_PATA_HPT3X3_DMA)
		/* Further debug needed */
		.mwdma_mask = ATA_MWDMA2,
		.udma_mask = ATA_UDMA2,
#endif
		.port_ops = &hpt3x3_port_ops
	};
	/* Register offsets of taskfiles in BAR4 area */
	static const u8 offset_cmd[2] = { 0x20, 0x28 };
	static const u8 offset_ctl[2] = { 0x36, 0x3E };
	const struct ata_port_info *ppi[] = { &info, NULL };
	struct ata_host *host;
	int i, rc;
	void __iomem *base;

	hpt3x3_init_chipset(pdev);

	if (!printed_version++)
		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");

	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
	if (!host)
		return -ENOMEM;
	/* acquire resources and fill host */
	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	/* Everything is relative to BAR4 if we set up this way */
	rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
	if (rc == -EBUSY)
		pcim_pin_device(pdev);
	if (rc)
		return rc;
	host->iomap = pcim_iomap_table(pdev);
	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;

	base = host->iomap[4];	/* Bus mastering base */

	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];
		struct ata_ioports *ioaddr = &ap->ioaddr;

		ioaddr->cmd_addr = base + offset_cmd[i];
		ioaddr->altstatus_addr =
		ioaddr->ctl_addr = base + offset_ctl[i];
		ioaddr->scr_addr = NULL;
		ata_sff_std_ports(ioaddr);
		ioaddr->bmdma_addr = base + 8 * i;

		ata_port_pbar_desc(ap, 4, -1, "ioport");
		ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
	}
	pci_set_master(pdev);
	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
				 IRQF_SHARED, &hpt3x3_sht);
}
开发者ID:AdrianHuang,项目名称:uclinux-robutest,代码行数:68,代码来源:pata_hpt3x3.c


示例13: pcmcia_modify_configuration

/** pcmcia_modify_configuration
 *
 * Modify a locked socket configuration
 */
int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
                                modconf_t *mod)
{
    struct pcmcia_socket *s;
    config_t *c;
    int ret;

    s = p_dev->socket;

    mutex_lock(&s->ops_mutex);
    c = p_dev->function_config;

    if (!(s->state & SOCKET_PRESENT)) {
        dev_dbg(&s->dev, "No card present\n");
        ret = -ENODEV;
        goto unlock;
    }
    if (!(c->state & CONFIG_LOCKED)) {
        dev_dbg(&s->dev, "Configuration isnt't locked\n");
        ret = -EACCES;
        goto unlock;
    }

    if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) {
        dev_dbg(&s->dev,
                "changing Vcc or IRQ is not allowed at this time\n");
        ret = -EINVAL;
        goto unlock;
    }

    /* We only allow changing Vpp1 and Vpp2 to the same value */
    if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
            (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
        if (mod->Vpp1 != mod->Vpp2) {
            dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
            ret = -EINVAL;
            goto unlock;
        }
        s->socket.Vpp = mod->Vpp1;
        if (s->ops->set_socket(s, &s->socket)) {
            dev_printk(KERN_WARNING, &s->dev,
                       "Unable to set VPP\n");
            ret = -EIO;
            goto unlock;
        }
    } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
               (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
        dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
        ret = -EINVAL;
        goto unlock;
    }

    if (mod->Attributes & CONF_IO_CHANGE_WIDTH) {
        pccard_io_map io_off = { 0, 0, 0, 0, 1 };
        pccard_io_map io_on;
        int i;

        io_on.speed = io_speed;
        for (i = 0; i < MAX_IO_WIN; i++) {
            if (!s->io[i].res)
                continue;
            io_off.map = i;
            io_on.map = i;

            io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8;
            io_on.start = s->io[i].res->start;
            io_on.stop = s->io[i].res->end;

            s->ops->set_io_map(s, &io_off);
            mdelay(40);
            s->ops->set_io_map(s, &io_on);
        }
    }
    ret = 0;
unlock:
    mutex_unlock(&s->ops_mutex);

    return ret;
} /* modify_configuration */
开发者ID:radekp,项目名称:android-n900-nitdroid_kernel,代码行数:83,代码来源:pcmcia_resource.c


示例14: sis_init_one

static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
	static int printed_version;
	struct ata_port_info pi = sis_port_info;
	const struct ata_port_info *ppi[] = { &pi, &pi };
	struct ata_host *host;
	u32 genctl, val;
	u8 pmr;
	u8 port2_start = 0x20;
	int i, rc;

	if (!printed_version++)
		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");

	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	/* check and see if the SCRs are in IO space or PCI cfg space */
	pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
	if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
		pi.flags |= SIS_FLAG_CFGSCR;

	/* if hardware thinks SCRs are in IO space, but there are
	 * no IO resources assigned, change to PCI cfg space.
	 */
	if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
	    ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
	     (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
		genctl &= ~GENCTL_IOMAPPED_SCR;
		pci_write_config_dword(pdev, SIS_GENCTL, genctl);
		pi.flags |= SIS_FLAG_CFGSCR;
	}

	pci_read_config_byte(pdev, SIS_PMR, &pmr);
	switch (ent->device) {
	case 0x0180:
	case 0x0181:

		/* The PATA-handling is provided by pata_sis */
		switch (pmr & 0x30) {
		case 0x10:
			ppi[1] = &sis_info133_for_sata;
			break;

		case 0x30:
			ppi[0] = &sis_info133_for_sata;
			break;
		}
		if ((pmr & SIS_PMR_COMBINED) == 0) {
			dev_printk(KERN_INFO, &pdev->dev,
				   "Detected SiS 180/181/964 chipset in SATA mode\n");
			port2_start = 64;
		} else {
			dev_printk(KERN_INFO, &pdev->dev,
				   "Detected SiS 180/181 chipset in combined mode\n");
			port2_start = 0;
			pi.flags |= ATA_FLAG_SLAVE_POSS;
		}
		break;

	case 0x0182:
	case 0x0183:
		pci_read_config_dword(pdev, 0x6C, &val);
		if (val & (1L << 31)) {
			dev_printk(KERN_INFO, &pdev->dev,
				   "Detected SiS 182/965 chipset\n");
			pi.flags |= ATA_FLAG_SLAVE_POSS;
		} else {
			dev_printk(KERN_INFO, &pdev->dev,
				   "Detected SiS 182/965L chipset\n");
		}
		break;

	case 0x1182:
		dev_printk(KERN_INFO, &pdev->dev,
			   "Detected SiS 1182/966/680 SATA controller\n");
		pi.flags |= ATA_FLAG_SLAVE_POSS;
		break;

	case 0x1183:
		dev_printk(KERN_INFO, &pdev->dev,
			   "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
		ppi[0] = &sis_info133_for_sata;
		ppi[1] = &sis_info133_for_sata;
		break;
	}

	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
	if (rc)
		return rc;

	for (i = 0; i < 2; i++) {
		struct ata_port *ap = host->ports[i];

		if (ap->flags & ATA_FLAG_SATA &&
		    ap->flags & ATA_FLAG_SLAVE_POSS) {
			rc = ata_slave_link_init(ap);
			if (rc)
				return rc;
//.........这里部分代码省略.........
开发者ID:Core2idiot,项目名称:Kernel-Samsung-3.0...-,代码行数:101,代码来源:sata_sis.c


示例15: sil680_init_one

static int __devinit sil680_init_one(struct pci_dev *pdev,
				     const struct pci_device_id *id)
{
	static const struct ata_port_info info = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
		.mwdma_mask = ATA_MWDMA2,
		.udma_mask = ATA_UDMA6,
		.port_ops = &sil680_port_ops
	};
	static const struct ata_port_info info_slow = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
		.mwdma_mask = ATA_MWDMA2,
		.udma_mask = ATA_UDMA5,
		.port_ops = &sil680_port_ops
	};
	const struct ata_port_info *ppi[] = { &info, NULL };
	static int printed_version;
	struct ata_host *host;
	void __iomem *mmio_base;
	int rc, try_mmio;

	if (!printed_version++)
		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");

	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	switch (sil680_init_chip(pdev, &try_mmio)) {
		case 0:
			ppi[0] = &info_slow;
			break;
		case 0x30:
			return -ENODEV;
	}

	if (!try_mmio)
		goto use_ioports;

	/* Try to acquire MMIO resources and fallback to PIO if
	 * that fails
	 */
	rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
	if (rc)
		goto use_ioports;

	/* Allocate host and set it up */
	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
	if (!host)
		return -ENOMEM;
	host->iomap = pcim_iomap_table(pdev);

	/* Setup DMA masks */
	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	pci_set_master(pdev);

	/* Get MMIO base and initialize port addresses */
	mmio_base = host->iomap[SIL680_MMIO_BAR];
	host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
	host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
	host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
	host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
	ata_sff_std_ports(&host->ports[0]->ioaddr);
	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
	host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
	host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
	host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
	ata_sff_std_ports(&host->ports[1]->ioaddr);

	/* Register & activate */
	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
				 IRQF_SHARED, &sil680_sht);

use_ioports:
	return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
}
开发者ID:Medvedroid,项目名称:OT_903D-kernel-2.6.35.7,代码行数:83,代码来源:pata_sil680.c


示例16: do_io_probe

static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
			unsigned int num)
{
    struct resource *res;
    struct socket_data *s_data = s->resource_data;
    unsigned int i, j, bad;
    int any;
    u_char *b, hole, most;

    dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
	       base, base+num-1);

    /* First, what does a floating port look like? */
    b = kzalloc(256, GFP_KERNEL);
    if (!b) {
	    dev_printk(KERN_ERR, &s->dev,
		   "do_io_probe: unable to kmalloc 256 bytes");
            return;
    }
    for (i = base, most = 0; i < base+num; i += 8) {
	res = claim_region(NULL, i, 8, IORESOURCE_IO, "PCMCIA IO probe");
	if (!res)
	    continue;
	hole = inb(i);
	for (j = 1; j < 8; j++)
	    if (inb(i+j) != hole) break;
	free_region(res);
	if ((j == 8) && (++b[hole] > b[most]))
	    most = hole;
	if (b[most] == 127) break;
    }
    kfree(b);

    bad = any = 0;
    for (i = base; i < base+num; i += 8) {
	res = claim_region(NULL, i, 8, IORESOURCE_IO, "PCMCIA IO probe");
	if (!res)
	    continue;
	for (j = 0; j < 8; j++)
	    if (inb(i+j) != most) break;
	free_region(res);
	if (j < 8) {
	    if (!any)
		printk(" excluding");
	    if (!bad)
		bad = any = i;
	} else {
	    if (bad) {
		sub_interval(&s_data->io_db, bad, i-bad);
		printk(" %#x-%#x", bad, i-1);
		bad = 0;
	    }
	}
    }
    if (bad) {
	if ((num > 16) && (bad == base) && (i == base+num)) {
	    printk(" nothing: probe failed.\n");
	    return;
	} else {
	    sub_interval(&s_data->io_db, bad, i-bad);
	    printk(" %#x-%#x", bad, i-1);
	}
    }

    printk(any ? "\n" : " clean.\n");
}
开发者ID:458941968,项目名称:mini2440-kernel-2.6.29,代码行数:66,代码来源:rsrc_nonstatic.c


示例17: sil680_init_one

static int __devinit sil680_init_one(struct pci_dev *pdev,
				     const struct pci_device_id *id)
{
	static const struct ata_port_info info = {
		.sht = &sil680_sht,
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = 0x1f,
		.mwdma_mask = 0x07,
		.udma_mask = ATA_UDMA6,
		.port_ops = &sil680_port_ops
	};
	static const struct ata_port_info info_slow = {
		.sht = &sil680_sht,
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = 0x1f,
		.mwdma_mask = 0x07,
		.udma_mask = ATA_UDMA5,
		.port_ops = &sil680_port_ops
	};
	const struct ata_port_info *ppi[] = { &info, NULL };
	static int printed_version;
	struct ata_host *host;
	void __iomem *mmio_base;
	int rc, try_mmio;

	if (!printed_version++)
		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");

	switch (sil680_init_chip(pdev, &try_mmio)) {
		case 0:
			ppi[0] = &info_slow;
			break;
		case 0x30:
			return -ENODEV;
	}

	if (!try_mmio)
		goto use_ioports;

	/* Try to acquire MMIO resources and fallback to PIO if
	 * that fails
	 */
	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;
	rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
	if (rc)
		goto use_ioports;

	/* Allocate host and set it up */
	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
	if (!host)
		return -ENOMEM;
	host->iomap = pcim_iomap_table(pdev);

	/* Setup DMA masks */
	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
	if (rc)
		return rc;
	pci_set_master(pdev);

	/* Get MMIO base and initialize port addresses */
	mmio_base = host->iomap[SIL680_MMIO_BAR];
	host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
	host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
	host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
	host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
	ata_std_ports(&host->ports[0]->ioaddr);
	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
	host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
	host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
	host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
	ata_std_ports(&host->ports[1]->ioaddr);

	/* Register & activate */
	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
				 &sil680_sht);

use_ioports:
	return ata_pci_init_one(pdev, ppi);
}

#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
	int try_mmio;

	sil680_init_chip(pdev, &try_mmio);
	return ata_pci_device_resume(pdev);
}
#endif

static const struct pci_device_id sil680[] = {
	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },

	{ },
};
//.........这里部分代码省略.........
开发者ID:manjunathkr,项目名称:vmkdrivers-gpl,代码行数:101,代码来源:pata_sil680.c


示例18: cdv_intel_crt_init

void cdv_intel_crt_init(struct drm_device *dev,
                        struct psb_intel_mode_device *mode_dev)
{

    struct gma_connector *gma_connector;
    struct gma_encoder *gma_encoder;
    struct drm_connector *connector;
    struct drm_encoder *encoder;

    u32 i2c_reg;

    gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
    if (!gma_encoder)
        return;

    gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
    if (!gma_connector)
        goto failed_connector;

    connector = &gma_connector->base;
    connector->polled = DRM_CONNECTOR_POLL_HPD;
    drm_connector_init(dev, connector,
                       &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);

    encoder = &gma_encoder->base;
    drm_encoder_init(dev, encoder,
                     &cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC, NULL);

    gma_connector_attach_encoder(gma_connector, gma_encoder);

    /* Set up the DDC bus. */
    i2c_reg = GPIOA;
    /* Remove the following code for CDV */
    /*
    if (dev_priv->crt_ddc_bus != 0)
    	i2c_reg = dev_priv->crt_ddc_bus;
    }*/
    gma_encoder->ddc_bus = psb_intel_i2c_create(dev,
                           i2c_reg, "CRTDDC_A");
    if (!gma_encoder->ddc_bus) {
        dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
                   "failed.\n");
        goto failed_ddc;
    }

    gma_encoder->type = INTEL_OUTPUT_ANALOG;
    /*
    psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
    psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
    */
    connector->interlace_allowed = 0;
    connector->doublescan_allowed = 0;

    drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
    drm_connector_helper_add(connector,
                             &cdv_intel_crt_connector_helper_funcs);

    drm_connector_register(connector);

    return;
failed_ddc:
    drm_encoder_cleanup(&gma_encoder->base);
    drm_connector_cleanup(&gma_connector->base);
    kfree(gma_connector);
failed_connector:
    kfree(gma_encoder);
    return;
}
开发者ID:ChineseDr,项目名称:linux,代码行数:68,代码来源:cdv_intel_crt.c


示例19: iwl_pci_probe


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ dev_proc函数代码示例发布时间:2022-05-30
下一篇:
C++ dev_path函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap