本文整理汇总了C++中dev_net函数的典型用法代码示例。如果您正苦于以下问题:C++ dev_net函数的具体用法?C++ dev_net怎么用?C++ dev_net使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了dev_net函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ip_route_me_harder
/* route_me_harder function, used by iptable_nat, iptable_mangle + ip_queue */
int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
{
struct net *net = dev_net(skb_dst(skb)->dev);
const struct iphdr *iph = ip_hdr(skb);
struct rtable *rt;
struct flowi fl = {};
unsigned long orefdst;
unsigned int hh_len;
unsigned int type;
type = inet_addr_type(net, iph->saddr);
if (skb->sk && inet_sk(skb->sk)->transparent)
type = RTN_LOCAL;
if (addr_type == RTN_UNSPEC)
addr_type = type;
/* some non-standard hacks like ipt_REJECT.c:send_reset() can cause
* packets with foreign saddr to appear on the NF_INET_LOCAL_OUT hook.
*/
if (addr_type == RTN_LOCAL) {
fl.nl_u.ip4_u.daddr = iph->daddr;
if (type == RTN_LOCAL)
fl.nl_u.ip4_u.saddr = iph->saddr;
fl.nl_u.ip4_u.tos = RT_TOS(iph->tos);
fl.oif = skb->sk ? skb->sk->sk_bound_dev_if : 0;
fl.mark = skb->mark;
fl.flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : 0;
if (ip_route_output_key(net, &rt, &fl) != 0)
return -1;
/* Drop old route. */
skb_dst_drop(skb);
skb_dst_set(skb, &rt->dst);
} else {
/* non-local src, find valid iif to satisfy
* rp-filter when calling ip_route_input. */
fl.nl_u.ip4_u.daddr = iph->saddr;
if (ip_route_output_key(net, &rt, &fl) != 0)
return -1;
orefdst = skb->_skb_refdst;
if (ip_route_input(skb, iph->daddr, iph->saddr,
RT_TOS(iph->tos), rt->dst.dev) != 0) {
dst_release(&rt->dst);
return -1;
}
dst_release(&rt->dst);
refdst_drop(orefdst);
}
if (skb_dst(skb)->error)
return -1;
#ifdef CONFIG_XFRM
if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
xfrm_decode_session(skb, &fl, AF_INET) == 0) {
struct dst_entry *dst = skb_dst(skb);
skb_dst_set(skb, NULL);
if (xfrm_lookup(net, &dst, &fl, skb->sk, 0))
return -1;
skb_dst_set(skb, dst);
}
#endif
/* Change in oif may mean change in hh_len. */
hh_len = skb_dst(skb)->dev->hard_header_len;
if (skb_headroom(skb) < hh_len &&
pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
return -1;
return 0;
}
开发者ID:3sOx,项目名称:asuswrt-merlin,代码行数:73,代码来源:netfilter.c
示例2: ip6_mc_input
int ip6_mc_input(struct sk_buff *skb)
{
struct ipv6hdr *hdr;
int deliver;
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
hdr = ipv6_hdr(skb);
deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
#ifdef CONFIG_IPV6_MROUTE
/*
* IPv6 multicast router mode is now supported ;)
*/
if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
/*
* Okay, we try to forward - split and duplicate
* packets.
*/
struct sk_buff *skb2;
struct inet6_skb_parm *opt = IP6CB(skb);
/* Check for MLD */
if (unlikely(opt->ra)) {
/* Check if this is a mld message */
u8 *ptr = skb_network_header(skb) + opt->ra;
struct icmp6hdr *icmp6;
u8 nexthdr = hdr->nexthdr;
int offset;
/* Check if the value of Router Alert
* is for MLD (0x0000).
*/
if ((ptr[2] | ptr[3]) == 0) {
deliver = 0;
if (!ipv6_ext_hdr(nexthdr)) {
/* BUG */
goto out;
}
offset = ipv6_skip_exthdr(skb, sizeof(*hdr),
&nexthdr);
if (offset < 0)
goto out;
if (nexthdr != IPPROTO_ICMPV6)
goto out;
if (!pskb_may_pull(skb, (skb_network_header(skb) +
offset + 1 - skb->data)))
goto out;
icmp6 = (struct icmp6hdr *)(skb_network_header(skb) + offset);
switch (icmp6->icmp6_type) {
case ICMPV6_MGM_QUERY:
case ICMPV6_MGM_REPORT:
case ICMPV6_MGM_REDUCTION:
case ICMPV6_MLD2_REPORT:
deliver = 1;
break;
}
goto out;
}
/* unknown RA - process it normally */
}
if (deliver)
skb2 = skb_clone(skb, GFP_ATOMIC);
else {
skb2 = skb;
skb = NULL;
}
if (skb2) {
skb2->dev = skb2->dst->dev;
ip6_mr_input(skb2);
}
}
out:
#endif
if (likely(deliver))
ip6_input(skb);
else {
/* discard */
kfree_skb(skb);
}
return 0;
}
开发者ID:deepikateriar,项目名称:Onlive-Source-Backup,代码行数:91,代码来源:ip6_input.c
示例3: dev_net
struct sk_buff *ndisc_build_skb(struct net_device *dev,
const struct in6_addr *daddr,
const struct in6_addr *saddr,
struct icmp6hdr *icmp6h,
const struct in6_addr *target,
int llinfo)
{
struct net *net = dev_net(dev);
struct sock *sk = net->ipv6.ndisc_sk;
struct sk_buff *skb;
struct icmp6hdr *hdr;
int hlen = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
int len;
u8 *opt;
if (!dev->addr_len)
llinfo = 0;
len = sizeof(struct icmp6hdr) + (target ? sizeof(*target) : 0);
if (llinfo)
len += ndisc_opt_addr_space(dev);
skb = alloc_skb((MAX_HEADER + sizeof(struct ipv6hdr) +
len + hlen + tlen), GFP_ATOMIC);
if (!skb) {
ND_PRINTK0(KERN_ERR
"ICMPv6 ND: %s() failed to allocate an skb.\n",
__func__);
return NULL;
}
skb_reserve(skb, hlen);
ip6_nd_hdr(sk, skb, dev, saddr, daddr, IPPROTO_ICMPV6, len);
skb->transport_header = skb->tail;
skb_put(skb, len);
hdr = (struct icmp6hdr *)skb_transport_header(skb);
memcpy(hdr, icmp6h, sizeof(*hdr));
opt = skb_transport_header(skb) + sizeof(struct icmp6hdr);
if (target) {
*(struct in6_addr *)opt = *target;
opt += sizeof(*target);
}
if (llinfo)
ndisc_fill_addr_option(opt, llinfo, dev->dev_addr,
dev->addr_len, dev->type);
hdr->icmp6_cksum = csum_ipv6_magic(saddr, daddr, len,
IPPROTO_ICMPV6,
csum_partial(hdr,
len, 0));
/* Manually assign socket ownership as we avoid calling
* sock_alloc_send_pskb() to bypass wmem buffer limits
*/
skb_set_owner_w(skb, sk);
return skb;
}
开发者ID:0xroot,项目名称:Blackphone-BP1-Kernel,代码行数:63,代码来源:ndisc.c
示例4: socket_mt6_v1
static bool
socket_mt6_v1(const struct sk_buff *skb, struct xt_action_param *par)
{
struct ipv6hdr *iph = ipv6_hdr(skb);
struct udphdr _hdr, *hp = NULL;
struct sock *sk;
struct in6_addr *daddr, *saddr;
__be16 dport, sport;
int thoff, tproto;
const struct xt_socket_mtinfo1 *info = (struct xt_socket_mtinfo1 *) par->matchinfo;
tproto = ipv6_find_hdr(skb, &thoff, -1, NULL);
if (tproto < 0) {
pr_debug("unable to find transport header in IPv6 packet, dropping\n");
return NF_DROP;
}
if (tproto == IPPROTO_UDP || tproto == IPPROTO_TCP) {
hp = skb_header_pointer(skb, thoff,
sizeof(_hdr), &_hdr);
if (hp == NULL)
return false;
saddr = &iph->saddr;
sport = hp->source;
daddr = &iph->daddr;
dport = hp->dest;
} else if (tproto == IPPROTO_ICMPV6) {
if (extract_icmp6_fields(skb, thoff, &tproto, &saddr, &daddr,
&sport, &dport))
return false;
} else {
return false;
}
sk = nf_tproxy_get_sock_v6(dev_net(skb->dev), tproto,
saddr, daddr, sport, dport, par->in, NFT_LOOKUP_ANY);
if (sk != NULL) {
bool wildcard;
bool transparent = true;
/* Ignore sockets listening on INADDR_ANY */
wildcard = (sk->sk_state != TCP_TIME_WAIT &&
ipv6_addr_any(&inet6_sk(sk)->rcv_saddr));
/* Ignore non-transparent sockets,
if XT_SOCKET_TRANSPARENT is used */
if (info && info->flags & XT_SOCKET_TRANSPARENT)
transparent = ((sk->sk_state != TCP_TIME_WAIT &&
inet_sk(sk)->transparent) ||
(sk->sk_state == TCP_TIME_WAIT &&
inet_twsk(sk)->tw_transparent));
xt_socket_put_sk(sk);
if (wildcard || !transparent)
sk = NULL;
}
pr_debug("proto %hhd %pI6:%hu -> %pI6:%hu "
"(orig %pI6:%hu) sock %p\n",
tproto, saddr, ntohs(sport),
daddr, ntohs(dport),
&iph->daddr, hp ? ntohs(hp->dest) : 0, sk);
return (sk != NULL);
}
开发者ID:33d,项目名称:linux-2.6.21-hh20,代码行数:68,代码来源:xt_socket.c
示例5: ip_md_tunnel_xmit
void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, u8 proto)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
u32 headroom = sizeof(struct iphdr);
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
const struct iphdr *inner_iph;
struct rtable *rt;
struct flowi4 fl4;
__be16 df = 0;
u8 tos, ttl;
tun_info = skb_tunnel_info(skb);
if (unlikely(!tun_info || !(tun_info->mode & IP_TUNNEL_INFO_TX) ||
ip_tunnel_info_af(tun_info) != AF_INET))
goto tx_error;
key = &tun_info->key;
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
inner_iph = (const struct iphdr *)skb_inner_network_header(skb);
tos = key->tos;
if (tos == 1) {
if (skb->protocol == htons(ETH_P_IP))
tos = inner_iph->tos;
else if (skb->protocol == htons(ETH_P_IPV6))
tos = ipv6_get_dsfield((const struct ipv6hdr *)inner_iph);
}
init_tunnel_flow(&fl4, proto, key->u.ipv4.dst, key->u.ipv4.src, 0,
RT_TOS(tos), tunnel->parms.link);
if (tunnel->encap.type != TUNNEL_ENCAP_NONE)
goto tx_error;
rt = ip_route_output_key(tunnel->net, &fl4);
if (IS_ERR(rt)) {
dev->stats.tx_carrier_errors++;
goto tx_error;
}
if (rt->dst.dev == dev) {
ip_rt_put(rt);
dev->stats.collisions++;
goto tx_error;
}
tos = ip_tunnel_ecn_encap(tos, inner_iph, skb);
ttl = key->ttl;
if (ttl == 0) {
if (skb->protocol == htons(ETH_P_IP))
ttl = inner_iph->ttl;
else if (skb->protocol == htons(ETH_P_IPV6))
ttl = ((const struct ipv6hdr *)inner_iph)->hop_limit;
else
ttl = ip4_dst_hoplimit(&rt->dst);
}
if (key->tun_flags & TUNNEL_DONT_FRAGMENT)
df = htons(IP_DF);
else if (skb->protocol == htons(ETH_P_IP))
df = inner_iph->frag_off & htons(IP_DF);
headroom += LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len;
if (headroom > dev->needed_headroom)
dev->needed_headroom = headroom;
if (skb_cow_head(skb, dev->needed_headroom)) {
ip_rt_put(rt);
goto tx_dropped;
}
iptunnel_xmit(NULL, rt, skb, fl4.saddr, fl4.daddr, proto, key->tos,
key->ttl, df, !net_eq(tunnel->net, dev_net(dev)));
return;
tx_error:
dev->stats.tx_errors++;
goto kfree;
tx_dropped:
dev->stats.tx_dropped++;
kfree:
kfree_skb(skb);
}
开发者ID:AshishNamdev,项目名称:linux,代码行数:73,代码来源:ip_tunnel.c
示例6: ip6_input_finish
static int ip6_input_finish(struct sk_buff *skb)
{
struct net *net = dev_net(skb_dst(skb)->dev);
const struct inet6_protocol *ipprot;
struct inet6_dev *idev;
unsigned int nhoff;
int nexthdr;
bool raw;
/*
* Parse extension headers
*/
rcu_read_lock();
resubmit:
idev = ip6_dst_idev(skb_dst(skb));
if (!pskb_pull(skb, skb_transport_offset(skb)))
goto discard;
nhoff = IP6CB(skb)->nhoff;
nexthdr = skb_network_header(skb)[nhoff];
raw = raw6_local_deliver(skb, nexthdr);
if ((ipprot = rcu_dereference(inet6_protos[nexthdr])) != NULL) {
int ret;
if (ipprot->flags & INET6_PROTO_FINAL) {
const struct ipv6hdr *hdr;
/* Free reference early: we don't need it any more,
and it may hold ip_conntrack module loaded
indefinitely. */
nf_reset(skb);
skb_postpull_rcsum(skb, skb_network_header(skb),
skb_network_header_len(skb));
hdr = ipv6_hdr(skb);
if (ipv6_addr_is_multicast(&hdr->daddr) &&
!ipv6_chk_mcast_addr(skb->dev, &hdr->daddr,
&hdr->saddr) &&
!ipv6_is_mld(skb, nexthdr, skb_network_header_len(skb)))
goto discard;
}
if (!(ipprot->flags & INET6_PROTO_NOPOLICY) &&
!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
goto discard;
ret = ipprot->handler(skb);
if (ret > 0)
goto resubmit;
else if (ret == 0)
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDELIVERS);
} else {
if (!raw) {
if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
IP6_INC_STATS_BH(net, idev,
IPSTATS_MIB_INUNKNOWNPROTOS);
icmpv6_send(skb, ICMPV6_PARAMPROB,
ICMPV6_UNK_NEXTHDR, nhoff);
}
} else
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDELIVERS);
kfree_skb(skb);
}
rcu_read_unlock();
return 0;
discard:
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDISCARDS);
rcu_read_unlock();
kfree_skb(skb);
return 0;
}
开发者ID:jiama,项目名称:linux-2.6,代码行数:72,代码来源:ip6_input.c
示例7: ipv6_rcv
int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
const struct ipv6hdr *hdr;
u32 pkt_len;
struct inet6_dev *idev;
struct net *net = dev_net(skb->dev);
if (skb->pkt_type == PACKET_OTHERHOST) {
kfree_skb(skb);
return NET_RX_DROP;
}
rcu_read_lock();
idev = __in6_dev_get(skb->dev);
IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_IN, skb->len);
if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
!idev || unlikely(idev->cnf.disable_ipv6)) {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDISCARDS);
goto drop;
}
memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));
/*
* Store incoming device index. When the packet will
* be queued, we cannot refer to skb->dev anymore.
*
* BTW, when we send a packet for our own local address on a
* non-loopback interface (e.g. ethX), it is being delivered
* via the loopback interface (lo) here; skb->dev = loopback_dev.
* It, however, should be considered as if it is being
* arrived via the sending interface (ethX), because of the
* nature of scoping architecture. --yoshfuji
*/
IP6CB(skb)->iif = skb_dst(skb) ? ip6_dst_idev(skb_dst(skb))->dev->ifindex : dev->ifindex;
if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
goto err;
hdr = ipv6_hdr(skb);
if (hdr->version != 6)
goto err;
/*
* RFC4291 2.5.3
* A packet received on an interface with a destination address
* of loopback must be dropped.
*/
if (!(dev->flags & IFF_LOOPBACK) &&
ipv6_addr_loopback(&hdr->daddr))
goto err;
/* RFC4291 2.7
* Nodes must not originate a packet to a multicast address whose scope
* field contains the reserved value 0; if such a packet is received, it
* must be silently dropped.
*/
if (ipv6_addr_is_multicast(&hdr->daddr) &&
IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0)
goto err;
/*
* RFC4291 2.7
* Multicast addresses must not be used as source addresses in IPv6
* packets or appear in any Routing header.
*/
if (ipv6_addr_is_multicast(&hdr->saddr))
goto err;
skb->transport_header = skb->network_header + sizeof(*hdr);
IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
pkt_len = ntohs(hdr->payload_len);
/* pkt_len may be zero if Jumbo payload option is present */
if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
IP6_INC_STATS_BH(net,
idev, IPSTATS_MIB_INTRUNCATEDPKTS);
goto drop;
}
if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
goto drop;
}
hdr = ipv6_hdr(skb);
}
if (hdr->nexthdr == NEXTHDR_HOP) {
if (ipv6_parse_hopopts(skb) < 0) {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
rcu_read_unlock();
return NET_RX_DROP;
}
}
//.........这里部分代码省略.........
开发者ID:jiama,项目名称:linux-2.6,代码行数:101,代码来源:ip6_input.c
示例8: arp_process
static int arp_process(struct sk_buff *skb)
{
struct net_device *dev = skb->dev;
struct in_device *in_dev = __in_dev_get_rcu(dev);
struct arphdr *arp;
unsigned char *arp_ptr;
struct rtable *rt;
unsigned char *sha;
__be32 sip, tip;
u16 dev_type = dev->type;
int addr_type;
struct neighbour *n;
struct net *net = dev_net(dev);
bool is_garp = false;
/* arp_rcv below verifies the ARP header and verifies the device
* is ARP'able.
*/
if (in_dev == NULL)
goto out;
arp = arp_hdr(skb);
switch (dev_type) {
default:
if (arp->ar_pro != htons(ETH_P_IP) ||
htons(dev_type) != arp->ar_hrd)
goto out;
break;
case ARPHRD_ETHER:
case ARPHRD_IEEE802_TR:
case ARPHRD_FDDI:
case ARPHRD_IEEE802:
/*
* ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
* devices, according to RFC 2625) devices will accept ARP
* hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
* This is the case also of FDDI, where the RFC 1390 says that
* FDDI devices should accept ARP hardware of (1) Ethernet,
* however, to be more robust, we'll accept both 1 (Ethernet)
* or 6 (IEEE 802.2)
*/
if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
arp->ar_pro != htons(ETH_P_IP))
goto out;
break;
case ARPHRD_AX25:
if (arp->ar_pro != htons(AX25_P_IP) ||
arp->ar_hrd != htons(ARPHRD_AX25))
goto out;
break;
case ARPHRD_NETROM:
if (arp->ar_pro != htons(AX25_P_IP) ||
arp->ar_hrd != htons(ARPHRD_NETROM))
goto out;
break;
}
/* Understand only these message types */
if (arp->ar_op != htons(ARPOP_REPLY) &&
arp->ar_op != htons(ARPOP_REQUEST))
goto out;
/*
* Extract fields
*/
arp_ptr = (unsigned char *)(arp + 1);
sha = arp_ptr;
arp_ptr += dev->addr_len;
memcpy(&sip, arp_ptr, 4);
arp_ptr += 4;
arp_ptr += dev->addr_len;
memcpy(&tip, arp_ptr, 4);
/*
* Check for bad requests for 127.x.x.x and requests for multicast
* addresses. If this is one such, delete it.
*/
if (ipv4_is_loopback(tip) || ipv4_is_multicast(tip))
goto out;
/*
* Special case: We must set Frame Relay source Q.922 address
*/
if (dev_type == ARPHRD_DLCI)
sha = dev->broadcast;
/*
* Process entry. The idea here is we want to send a reply if it is a
* request for us or if it is a request for someone else that we hold
* a proxy for. We want to add an entry to our cache if it is a reply
* to us or if it is a request for our address.
* (The assumption for this last is that if someone is requesting our
* address, they are probably intending to talk to us, so it saves time
* if we cache their address. Their address is also probably not in
* our cache, since ours is not in their cache.)
*
* Putting this another way, we only care about replies if they are to
//.........这里部分代码省略.........
开发者ID:PterX,项目名称:rt-n56u,代码行数:101,代码来源:arp.c
示例9: arp_constructor
static int arp_constructor(struct neighbour *neigh)
{
__be32 addr = *(__be32 *)neigh->primary_key;
struct net_device *dev = neigh->dev;
struct in_device *in_dev;
struct neigh_parms *parms;
rcu_read_lock();
in_dev = __in_dev_get_rcu(dev);
if (in_dev == NULL) {
rcu_read_unlock();
return -EINVAL;
}
neigh->type = inet_addr_type(dev_net(dev), addr);
parms = in_dev->arp_parms;
__neigh_parms_put(neigh->parms);
neigh->parms = neigh_parms_clone(parms);
rcu_read_unlock();
if (!dev->header_ops) {
neigh->nud_state = NUD_NOARP;
neigh->ops = &arp_direct_ops;
neigh->output = neigh_direct_output;
} else {
/* Good devices (checked by reading texts, but only Ethernet is
tested)
ARPHRD_ETHER: (ethernet, apfddi)
ARPHRD_FDDI: (fddi)
ARPHRD_IEEE802: (tr)
ARPHRD_METRICOM: (strip)
ARPHRD_ARCNET:
etc. etc. etc.
ARPHRD_IPDDP will also work, if author repairs it.
I did not it, because this driver does not work even
in old paradigm.
*/
#if 1
/* So... these "amateur" devices are hopeless.
The only thing, that I can say now:
It is very sad that we need to keep ugly obsolete
code to make them happy.
They should be moved to more reasonable state, now
they use rebuild_header INSTEAD OF hard_start_xmit!!!
Besides that, they are sort of out of date
(a lot of redundant clones/copies, useless in 2.1),
I wonder why people believe that they work.
*/
switch (dev->type) {
default:
break;
case ARPHRD_ROSE:
#if IS_ENABLED(CONFIG_AX25)
case ARPHRD_AX25:
#if IS_ENABLED(CONFIG_NETROM)
case ARPHRD_NETROM:
#endif
neigh->ops = &arp_broken_ops;
neigh->output = neigh->ops->output;
return 0;
#else
break;
#endif
}
#endif
if (neigh->type == RTN_MULTICAST) {
neigh->nud_state = NUD_NOARP;
arp_mc_map(addr, neigh->ha, dev, 1);
} else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) {
neigh->nud_state = NUD_NOARP;
memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
} else if (neigh->type == RTN_BROADCAST ||
(dev->flags & IFF_POINTOPOINT)) {
neigh->nud_state = NUD_NOARP;
memcpy(neigh->ha, dev->broadcast, dev->addr_len);
}
if (dev->header_ops->cache)
neigh->ops = &arp_hh_ops;
else
neigh->ops = &arp_generic_ops;
if (neigh->nud_state & NUD_VALID)
neigh->output = neigh->ops->connected_output;
else
neigh->output = neigh->ops->output;
}
return 0;
}
开发者ID:PterX,项目名称:rt-n56u,代码行数:94,代码来源:arp.c
示例10: arp_solicit
static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
{
__be32 saddr = 0;
u8 *dst_ha = NULL;
struct net_device *dev = neigh->dev;
__be32 target = *(__be32 *)neigh->primary_key;
int probes = atomic_read(&neigh->probes);
struct in_device *in_dev;
rcu_read_lock();
in_dev = __in_dev_get_rcu(dev);
if (!in_dev) {
rcu_read_unlock();
return;
}
switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
default:
case 0: /* By default announce any local IP */
if (skb && inet_addr_type(dev_net(dev),
ip_hdr(skb)->saddr) == RTN_LOCAL)
saddr = ip_hdr(skb)->saddr;
break;
case 1: /* Restrict announcements of saddr in same subnet */
if (!skb)
break;
saddr = ip_hdr(skb)->saddr;
if (inet_addr_type(dev_net(dev), saddr) == RTN_LOCAL) {
/* saddr should be known to target */
if (inet_addr_onlink(in_dev, target, saddr))
break;
}
saddr = 0;
break;
case 2: /* Avoid secondary IPs, get a primary/preferred one */
break;
}
rcu_read_unlock();
if (!saddr)
saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
probes -= neigh->parms->ucast_probes;
if (probes < 0) {
if (!(neigh->nud_state & NUD_VALID))
printk(KERN_DEBUG
"trying to ucast probe in NUD_INVALID\n");
dst_ha = neigh->ha;
read_lock_bh(&neigh->lock);
} else {
probes -= neigh->parms->app_probes;
if (probes < 0) {
#ifdef CONFIG_ARPD
neigh_app_ns(neigh);
#endif
return;
}
}
arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
dst_ha, dev->dev_addr, NULL);
if (dst_ha)
read_unlock_bh(&neigh->lock);
}
开发者ID:PterX,项目名称:rt-n56u,代码行数:63,代码来源:arp.c
示例11: vti4_err
static int vti4_err(struct sk_buff *skb, u32 info)
{
__be32 spi;
__u32 mark;
struct xfrm_state *x;
struct ip_tunnel *tunnel;
struct ip_esp_hdr *esph;
struct ip_auth_hdr *ah ;
struct ip_comp_hdr *ipch;
struct net *net = dev_net(skb->dev);
const struct iphdr *iph = (const struct iphdr *)skb->data;
int protocol = iph->protocol;
struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
iph->daddr, iph->saddr, 0);
if (!tunnel)
return -1;
mark = be32_to_cpu(tunnel->parms.o_key);
switch (protocol) {
case IPPROTO_ESP:
esph = (struct ip_esp_hdr *)(skb->data+(iph->ihl<<2));
spi = esph->spi;
break;
case IPPROTO_AH:
ah = (struct ip_auth_hdr *)(skb->data+(iph->ihl<<2));
spi = ah->spi;
break;
case IPPROTO_COMP:
ipch = (struct ip_comp_hdr *)(skb->data+(iph->ihl<<2));
spi = htonl(ntohs(ipch->cpi));
break;
default:
return 0;
}
switch (icmp_hdr(skb)->type) {
case ICMP_DEST_UNREACH:
if (icmp_hdr(skb)->code != ICMP_FRAG_NEEDED)
return 0;
case ICMP_REDIRECT:
break;
default:
return 0;
}
x = xfrm_state_lookup(net, mark, (const xfrm_address_t *)&iph->daddr,
spi, protocol, AF_INET);
if (!x)
return 0;
if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH)
ipv4_update_pmtu(skb, net, info, 0, protocol);
else
ipv4_redirect(skb, net, 0, protocol);
xfrm_state_put(x);
return 0;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:61,代码来源:ip_vti.c
示例12: vti_xmit
static netdev_tx_t vti_xmit(struct sk_buff *skb, struct net_device *dev,
struct flowi *fl)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct ip_tunnel_parm *parms = &tunnel->parms;
struct dst_entry *dst = skb_dst(skb);
struct net_device *tdev; /* Device to other host */
int pkt_len = skb->len;
int err;
int mtu;
if (!dst) {
dev->stats.tx_carrier_errors++;
goto tx_error_icmp;
}
dst_hold(dst);
dst = xfrm_lookup(tunnel->net, dst, fl, NULL, 0);
if (IS_ERR(dst)) {
dev->stats.tx_carrier_errors++;
goto tx_error_icmp;
}
if (!vti_state_check(dst->xfrm, parms->iph.daddr, parms->iph.saddr)) {
dev->stats.tx_carrier_errors++;
dst_release(dst);
goto tx_error_icmp;
}
tdev = dst->dev;
if (tdev == dev) {
dst_release(dst);
dev->stats.collisions++;
goto tx_error;
}
mtu = dst_mtu(dst);
if (skb->len > mtu) {
skb_dst_update_pmtu(skb, mtu);
if (skb->protocol == htons(ETH_P_IP)) {
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
htonl(mtu));
} else {
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
}
dst_release(dst);
goto tx_error;
}
skb_scrub_packet(skb, !net_eq(tunnel->net, dev_net(dev)));
skb_dst_set(skb, dst);
skb->dev = skb_dst(skb)->dev;
err = dst_output(tunnel->net, skb->sk, skb);
if (net_xmit_eval(err) == 0)
err = pkt_len;
iptunnel_xmit_stats(dev, err);
return NETDEV_TX_OK;
tx_error_icmp:
dst_link_failure(skb);
tx_error:
dev->stats.tx_errors++;
kfree_skb(skb);
return NETDEV_TX_OK;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:71,代码来源:ip_vti.c
示例13: ip_options_echo
int ip_options_echo(struct ip_options *dopt, struct sk_buff *skb)
{
const struct ip_options *sopt;
unsigned char *sptr, *dptr;
int soffset, doffset;
int optlen;
__be32 daddr;
memset(dopt, 0, sizeof(struct ip_options));
sopt = &(IPCB(skb)->opt);
if (sopt->optlen == 0)
return 0;
sptr = skb_network_header(skb);
dptr = dopt->__data;
daddr = skb_rtable(skb)->rt_spec_dst;
if (sopt->rr) {
optlen = sptr[sopt->rr+1];
soffset = sptr[sopt->rr+2];
dopt->rr = dopt->optlen + sizeof(struct iphdr);
memcpy(dptr, sptr+sopt->rr, optlen);
if (sopt->rr_needaddr && soffset <= optlen) {
if (soffset + 3 > optlen)
return -EINVAL;
dptr[2] = soffset + 4;
dopt->rr_needaddr = 1;
}
dptr += optlen;
dopt->optlen += optlen;
}
if (sopt->ts) {
optlen = sptr[sopt->ts+1];
soffset = sptr[sopt->ts+2];
dopt->ts = dopt->optlen + sizeof(struct iphdr);
memcpy(dptr, sptr+sopt->ts, optlen);
if (soffset <= optlen) {
if (sopt->ts_needaddr) {
if (soffset + 3 > optlen)
return -EINVAL;
dopt->ts_needaddr = 1;
soffset += 4;
}
if (sopt->ts_needtime) {
if (soffset + 3 > optlen)
return -EINVAL;
if ((dptr[3]&0xF) != IPOPT_TS_PRESPEC) {
dopt->ts_needtime = 1;
soffset += 4;
} else {
dopt->ts_needtime = 0;
if (soffset + 7 <= optlen) {
__be32 addr;
memcpy(&addr, dptr+soffset-1, 4);
if (inet_addr_type(dev_net(skb_dst(skb)->dev), addr) != RTN_UNICAST) {
dopt->ts_needtime = 1;
soffset += 8;
}
}
}
}
dptr[2] = soffset;
}
dptr += optlen;
dopt->optlen += optlen;
}
if (sopt->srr) {
unsigned char *start = sptr+sopt->srr;
__be32 faddr;
optlen = start[1];
soffset = start[2];
doffset = 0;
if (soffset > optlen)
soffset = optlen + 1;
soffset -= 4;
if (soffset > 3) {
memcpy(&faddr, &start[soffset-1], 4);
for (soffset-=4, doffset=4; soffset > 3; soffset-=4, doffset+=4)
memcpy(&dptr[doffset-1], &start[soffset-1], 4);
/*
* RFC1812 requires to fix illegal source routes.
*/
if (memcmp(&ip_hdr(skb)->saddr,
&start[soffset + 3], 4) == 0)
doffset -= 4;
}
if (doffset > 3) {
memcpy(&start[doffset-1], &daddr, 4);
dopt->faddr = faddr;
dptr[0] = start[0];
dptr[1] = doffset+3;
dptr[2] = 4;
dptr += doffset+3;
dopt->srr = dopt->optlen + sizeof(struct iphdr);
//.........这里部分代码省略.........
开发者ID:jing-git,项目名称:rt-n56u,代码行数:101,代码来源:ip_options.c
示例14: ip6_fragment
int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
{
struct sk_buff *frag;
struct rt6_info *rt = (struct rt6_info*)skb_dst(skb);
struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
struct ipv6hdr *tmp_hdr;
struct frag_hdr *fh;
unsigned int mtu, hlen, left, len;
int hroom, troom;
__be32 frag_id = 0;
int ptr, offset = 0, err=0;
u8 *prevhdr, nexthdr = 0;
struct net *net = dev_net(skb_dst(skb)->dev);
hlen = ip6_find_1stfragopt(skb, &prevhdr);
nexthdr = *prevhdr;
mtu = ip6_skb_dst_mtu(skb);
/* We must not fragment if the socket is set to force MTU discovery
* or if the skb it not generated by a local socket.
*/
if (!skb->local_df && skb->len > mtu) {
skb->dev = skb_dst(skb)->dev;
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
IPSTATS_MIB_FRAGFAILS);
kfree_skb(skb);
return -EMSGSIZE;
}
if (np && np->frag_size < mtu) {
if (np->frag_size)
mtu = np->frag_size;
}
mtu -= hlen + sizeof(struct frag_hdr);
if (skb_has_frag_list(skb)) {
int first_len = skb_pagelen(skb);
struct sk_buff *frag2;
if (first_len - hlen > mtu ||
((first_len - hlen) & 7) ||
skb_cloned(skb))
goto slow_path;
skb_walk_frags(skb, frag) {
/* Correct geometry. */
if (frag->len > mtu ||
((frag->len & 7) && frag->next) ||
skb_headroom(frag) < hlen)
goto slow_path_clean;
/* Partially cloned skb? */
if (skb_shared(frag))
goto slow_path_clean;
BUG_ON(frag->sk);
if (skb->sk) {
frag->sk = skb->sk;
frag->destructor = sock_wfree;
}
skb->truesize -= frag->truesize;
}
err = 0;
offset = 0;
frag = skb_shinfo(skb)->frag_list;
skb_frag_list_init(skb);
/* BUILD HEADER */
*prevhdr = NEXTHDR_FRAGMENT;
tmp_hdr = kmemdup(skb_network_header(skb), hlen, GFP_ATOMIC);
if (!tmp_hdr) {
IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
IPSTATS_MIB_FRAGFAILS);
return -ENOMEM;
}
__skb_pull(skb, hlen);
fh = (struct frag_hdr*)__skb_push(skb, sizeof(struct frag_hdr));
__skb_push(skb, hlen);
skb_reset_network_header(skb);
memcpy(skb_network_header(skb), tmp_hdr, hlen);
ipv6_select_ident(fh, rt);
fh->nexthdr = nexthdr;
fh->reserved = 0;
fh->frag_off = htons(IP6_MF);
frag_id = fh->identification;
first_len = skb_pagelen(skb);
skb->data_len = first_len - skb_headlen(skb);
skb->len = first_len;
ipv6_hdr(skb)->payload_len = htons(first_len -
sizeof(struct ipv6hdr));
dst_hold(&rt->dst);
for (;;) {
//.........这里部分代码省略.........
开发者ID:LiquidSmooth-Devices,项目名称:Deathly_Kernel_D2,代码行数:101,代码来源:ip6_output.c
示例15: dccp_v6_err
static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
u8 type, u8 code, int offset, __be32 info)
{
const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data;
const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
struct dccp_sock *dp;
struct ipv6_pinfo *np;
struct sock *sk;
int err;
__u64 seq;
struct net *net = dev_net(skb->dev);
if (skb->len < offset + sizeof(*dh) ||
skb->len < offset + __dccp_basic_hdr_len(dh)) {
ICMP6_INC_STATS_BH(net, __in6_dev_get(skb->dev),
ICMP6_MIB_INERRORS);
return;
}
sk = inet6_lookup(net, &dccp_hashinfo,
&hdr->daddr, dh->dccph_dport,
&hdr->saddr, dh->dccph_sport, inet6_iif(skb));
if (sk == NULL) {
ICMP6_INC_STATS_BH(net, __in6_dev_get(skb->dev),
ICMP6_MIB_INERRORS);
return;
}
if (sk->sk_state == DCCP_TIME_WAIT) {
inet_twsk_put(inet_twsk(sk));
return;
}
bh_lock_sock(sk);
if (sock_owned_by_user(sk))
NET_INC_STATS_BH(net, LINUX_MIB_LOCKDROPPEDICMPS);
if (sk->sk_state == DCCP_CLOSED)
goto out;
dp = dccp_sk(sk);
seq = dccp_hdr_seq(dh);
if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
!between48(seq, dp->dccps_awl, dp->dccps_awh)) {
NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
goto out;
}
np = inet6_sk(sk);
if (type == NDISC_REDIRECT) {
struct dst_entry *dst = __sk_dst_check(sk, np->dst_cookie);
if (dst)
dst->ops->redirect(dst, sk, skb);
goto out;
}
if (type == ICMPV6_PKT_TOOBIG) {
struct dst_entry *dst = NULL;
if (sock_owned_by_user(sk))
goto out;
if ((1 << sk->sk_state) & (DCCPF_LISTEN | DCCPF_CLOSED))
goto out;
dst = inet6_csk_update_pmtu(sk, ntohl(info));
if (!dst)
goto out;
if (inet_csk(sk)->icsk_pmtu_cookie > dst_mtu(dst))
dccp_sync_mss(sk, dst_mtu(dst));
goto out;
}
icmpv6_err_convert(type, code, &err);
/* Might be for an request_sock */
switch (sk->sk_state) {
struct request_sock *req, **prev;
case DCCP_LISTEN:
if (sock_owned_by_user(sk))
goto out;
req = inet6_csk_search_req(sk, &prev, dh->dccph_dport,
&hdr->daddr, &hdr->saddr,
inet6_iif(skb));
if (req == NULL)
goto out;
/*
* ICMPs are not backlogged, hence we cannot get an established
* socket here.
*/
WARN_ON(req->sk != NULL);
if (!between48(seq, dccp_rsk(req)->dreq_iss,
dccp_rsk(req)->dreq_gss)) {
NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
//.........这里部分代码省略.........
开发者ID:shakalaca,项目名称:ASUS_ZenFone_ZE601KL,代码行数:101,代码来源:ipv6.c
示例16: register_vlan_device
/* Attach a VLAN device to a mac address (ie Ethernet Card).
* Returns 0 if the device was created or a negative error code otherwise.
*/
static int register_vlan_device(struct net_device *real_dev, u16 vlan_id)
{
struct net_device *new_dev;
struct net *net = dev_net(real_dev);
struct vlan_net *vn = net_generic(net, vlan_net_id);
char name[IFNAMSIZ];
int err;
if (vlan_id >= VLAN_VID_MASK)
return -ERANGE;
err = vlan_check_real_dev(real_dev, htons(ETH_P_8021Q), vlan_id);
if (err < 0)
return err;
/* Gotta set up the fields for the device. */
switch (vn->name_type) {
case VLAN_NAME_TYPE_RAW_PLUS_VID:
/* name will look like: eth1.0005 */
snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, vlan_id);
break;
case VLAN_NAME_TYPE_PLUS_VID_NO_PAD:
/* Put our vlan.VID in the name.
* Name will look like: vlan5
*/
snprintf(name, IFNAMSIZ, "vlan%i", vlan_id);
break;
case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD:
/* Put our vlan.VID in the name.
* Name will look like: eth0.5
*/
snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, vlan_id);
break;
case VLAN_NAME_TYPE_PLUS_VID:
/* Put our vlan.VID in the name.
* Name will look like: vlan0005
*/
default:
snprintf(name, IFNAMSIZ, "vlan%.4i", vlan_id);
}
new_dev = alloc_netdev(sizeof(struct vlan_dev_priv), name, vlan_setup);
if (new_dev == NULL)
return -ENOBUFS;
dev_net_set(new_dev, net);
/* need 4 bytes for extra VLAN header info,
* hope the underlying device can handle it.
*/
new_dev->mtu = real_dev->mtu;
new_dev->priv_flags |= (real_dev->priv_flags & IFF_UNICAST_FLT);
vlan_dev_priv(new_dev)->vlan_proto = htons(ETH_P_8021Q);
vlan_dev_priv(new_dev)->vlan_id = vlan_id;
vlan_dev_priv(new_dev)->real_dev = real_dev;
vlan_dev_priv(new_dev)->dent = NULL;
vlan_dev_priv(new_dev)->flags = VLAN_FLAG_REORDER_HDR;
new_dev->rtnl_link_ops = &vlan_link_ops;
err = register_vlan_dev(new_dev);
if (err < 0)
goto out_free_newdev;
return 0;
out_free_newdev:
free_netdev(new_dev);
return err;
}
开发者ID:wpwrak,项目名称:ben-wpan-linux,代码行数:73,代码来源:vlan.c
示例17: dccp_v4_err
/*
* This routine is called by the ICMP module when it gets some sort of error
* condition. If err < 0 then the socket should be closed and the error
* returned to the user. If err > 0 it's just the icmp type << 8 | icmp code.
* After adjustment header points to the first 8 bytes of the tcp header. We
* need to find the appropriate port.
*
* The locking strategy used here is very "optimistic". When someone else
* accesses the socket the ICMP is just dropped and for some paths there is no
* check at all. A more general error queue to queue errors for later handling
* is probably better.
*/
static void dccp_v4_err(struct sk_buff *skb, u32 info)
{
const struct iphdr *iph = (struct iphdr *)skb->data;
const u8 offset = iph->ihl << 2;
const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
struct dccp_sock *dp;
struct inet_sock *inet;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct sock *sk;
__u64 seq;
int err;
struct net *net = dev_net(skb->dev);
if (skb->len < offset + sizeof(*dh) ||
skb->len < offset + __dccp_basic_hdr_len(dh)) {
ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
return;
}
sk = inet_lookup(net, &dccp_hashinfo,
iph->daddr, dh->dccph_dport,
iph->saddr, dh->dccph_sport, inet_iif(skb));
if (sk == NULL) {
ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
return;
}
if (sk->sk_state == DCCP_TIME_WAIT) {
inet_twsk_put(inet_twsk(sk));
return;
}
bh_lock_sock(sk);
/* If too many ICMPs get dropped on busy
* servers this needs to be solved differently.
*/
if (sock_owned_by_user(sk))
NET_INC_STATS_BH(net, LINUX_MIB_LOCKDROPPEDICMPS);
if (sk->sk_state == DCCP_CLOSED)
goto out;
dp = dccp_sk(sk);
seq = dccp_hdr_seq(dh);
if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
!between48(seq, dp->dccps_awl, dp->dccps_awh)) {
NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
goto out;
}
switch (type) {
case ICMP_SOURCE_QUENCH:
/* Just silently ignore these. */
goto out;
case ICMP_PARAMETERPROB:
err = EPROTO;
break;
case ICMP_DEST_UNREACH:
if (code > NR_ICMP_UNREACH)
goto out;
if (code == ICMP_FRAG_NEEDED) { /* PMTU discovery (RFC1191) */
if (!sock_owned_by_user(sk))
dccp_do_pmtu_discovery(sk, iph, info);
goto out;
}
err = icmp_err_convert[code].errno;
break;
case ICMP_TIME_EXCEEDED:
err = EHOSTUNREACH;
break;
default:
goto out;
}
switch (sk->sk_state) {
struct request_sock *req , **prev;
case DCCP_LISTEN:
if (sock_owned_by_user(sk))
goto out;
req = inet_csk_search_req(sk, &prev, dh->dccph_dport,
iph->daddr, iph->saddr);
if (!req)
goto out;
/*
//.........这里部分代码省略.........
开发者ID:JamesAng,项目名称:lx-sk,代码行数:101,代码来源:ipv4.c
示例18: ip6_mc_input
int ip6_mc_input(struct sk_buff *skb)
{
const struct ipv6hdr *hdr;
bool deliver;
IP6_UPD_PO_STATS_BH(dev_net(skb_dst(skb)->dev),
ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INMCAST,
skb->len);
hdr = ipv6_hdr(skb);
deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
#ifdef CONFIG_IPV6_MROUTE
/*
* IPv6 multicast router mode is now supported ;)
*/
if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
!(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
/*
* Okay, we try to forward - split and duplicate
* packets.
*/
struct sk_buff *skb2;
struct inet6_skb_parm *opt = IP6CB(skb);
/* Check for MLD */
if (unlikely(opt->flags & IP6SKB_ROUTERALERT)) {
/* Check if this is a mld message */
u8 nexthdr = hdr->nexthdr;
__be16 frag_off;
int offset;
/* Check if the value of Router Alert
* is for MLD (0x0000).
*/
if (opt->ra == htons(IPV6_OPT_ROUTERALERT_MLD)) {
deliver = false;
if (!ipv6_ext_hdr(nexthdr)) {
/* BUG */
goto out;
}
offset = ipv6_skip_exthdr(skb, sizeof(*hdr),
&nexthdr, &frag_off);
if (offset < 0)
goto out;
if (!ipv6_is_mld(skb, nexthdr, offset))
goto out;
deliver = true;
}
/* unknown RA - process it normally */
}
if (deliver)
skb2 = skb_clone(skb, GFP_ATOMIC);
else {
skb2 = skb;
skb = NULL;
}
if (skb2) {
ip6_mr_input(sk
|
请发表评论