C++ defer_kevent函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中defer_kevent函数的典型用法代码示例。如果您正苦于以下问题：C++ defer_kevent函数的具体用法？C++ defer_kevent怎么用？C++ defer_kevent使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了defer_kevent函数的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rx_complete

static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
	struct sk_buff	*skb = req->context;
	struct eth_dev	*dev = ep->driver_data;
	int		status = req->status;
	bool		queue = 0;

	switch (status) {

	/* normal completion */
	case 0:
		skb_put(skb, req->actual);

		if (dev->unwrap) {
			unsigned long	flags;

			spin_lock_irqsave(&dev->lock, flags);
			if (dev->port_usb) {
				status = dev->unwrap(dev->port_usb,
							skb,
							&dev->rx_frames);
				if (status == -EINVAL)
					dev->net->stats.rx_errors++;
				else if (status == -EOVERFLOW)
					dev->net->stats.rx_over_errors++;
			} else {
				dev_kfree_skb_any(skb);
				status = -ENOTCONN;
			}
			spin_unlock_irqrestore(&dev->lock, flags);
		} else {
			skb_queue_tail(&dev->rx_frames, skb);
		}

		if (!status)
			queue = 1;
		break;

	/* software-driven interface shutdown */
	case -ECONNRESET:		/* unlink */
	case -ESHUTDOWN:		/* disconnect etc */
		VDBG(dev, "rx shutdown, code %d\n", status);
		goto quiesce;

	/* for hardware automagic (such as pxa) */
	case -ECONNABORTED:		/* endpoint reset */
		DBG(dev, "rx %s reset\n", ep->name);
		defer_kevent(dev, WORK_RX_MEMORY);
quiesce:
		dev_kfree_skb_any(skb);
		goto clean;

	/* data overrun */
	case -EOVERFLOW:
		dev->net->stats.rx_over_errors++;
		/* FALLTHROUGH */

	default:
		queue = 1;
		dev_kfree_skb_any(skb);
		dev->net->stats.rx_errors++;
		DBG(dev, "rx status %d\n", status);
		break;
	}

clean:
	spin_lock(&dev->req_lock);
	list_add(&req->list, &dev->rx_reqs);
	spin_unlock(&dev->req_lock);

	if (queue)
		queue_work(uether_wq, &dev->rx_work);
}

开发者ID:moonlightly，项目名称:android_kernel_samsung_ms013g，代码行数:73，代码来源:u_ether.c

示例2: rx_submit

static int
rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
{
	struct sk_buff	*skb;
	int		retval = -ENOMEM;
	size_t		size = 0;
	struct usb_ep	*out;
	unsigned long	flags;

	spin_lock_irqsave(&dev->lock, flags);
	if (dev->port_usb)
		out = dev->port_usb->out_ep;
	else
		out = NULL;
	spin_unlock_irqrestore(&dev->lock, flags);

	if (!out)
		return -ENOTCONN;


	/* Padding up to RX_EXTRA handles minor disagreements with host.
	 * Normally we use the USB "terminate on short read" convention;
	 * so allow up to (N*maxpacket), since that memory is normally
	 * already allocated.  Some hardware doesn't deal well with short
	 * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
	 * byte off the end (to force hardware errors on overflow).
	 *
	 * RNDIS uses internal framing, and explicitly allows senders to
	 * pad to end-of-packet.  That's potentially nice for speed, but
	 * means receivers can't recover lost synch on their own (because
	 * new packets don't only start after a short RX).
	 */
	size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA;
	size += dev->port_usb->header_len;
	size += out->maxpacket - 1;
	size -= size % out->maxpacket;

	if (dev->ul_max_pkts_per_xfer)
		size *= dev->ul_max_pkts_per_xfer;

	if (dev->port_usb->is_fixed)
		size = max_t(size_t, size, dev->port_usb->fixed_out_len);

	pr_debug("%s: size: %d", __func__, size);
	skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
	if (skb == NULL) {
		DBG(dev, "no rx skb\n");
		goto enomem;
	}

	/* Some platforms perform better when IP packets are aligned,
	 * but on at least one, checksumming fails otherwise.  Note:
	 * RNDIS headers involve variable numbers of LE32 values.
	 */
	skb_reserve(skb, NET_IP_ALIGN);

	req->buf = skb->data;
	req->length = size;
	req->context = skb;

	retval = usb_ep_queue(out, req, gfp_flags);
	if (retval == -ENOMEM)
enomem:
		defer_kevent(dev, WORK_RX_MEMORY);
	if (retval) {
		DBG(dev, "rx submit --> %d\n", retval);
		if (skb)
			dev_kfree_skb_any(skb);
	}
	return retval;
}

开发者ID:moonlightly，项目名称:android_kernel_samsung_ms013g，代码行数:71，代码来源:u_ether.c

示例3: rx_complete

static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
    struct sk_buff	*skb = req->context;
    struct eth_dev	*dev = ep->driver_data;
    int		status = req->status;
    bool		queue = 0;

    switch (status) {


    case 0:
        skb_put(skb, req->actual);

        if (dev->unwrap) {
            unsigned long	flags;

            spin_lock_irqsave(&dev->lock, flags);
            if (dev->port_usb) {
                status = dev->unwrap(dev->port_usb,
                                     skb,
                                     &dev->rx_frames);
            } else {
                dev_kfree_skb_any(skb);
                status = -ENOTCONN;
            }
            spin_unlock_irqrestore(&dev->lock, flags);
        } else {
            skb_queue_tail(&dev->rx_frames, skb);
        }

        if (!status)
            queue = 1;
        break;


    case -ECONNRESET:
    case -ESHUTDOWN:
        VDBG(dev, "rx shutdown, code %d\n", status);
        goto quiesce;


    case -ECONNABORTED:
        DBG(dev, "rx %s reset\n", ep->name);
        defer_kevent(dev, WORK_RX_MEMORY);
quiesce:
        if (skb)
            dev_kfree_skb_any(skb);
        goto clean;


    case -EOVERFLOW:
        dev->net->stats.rx_over_errors++;


    default:
        queue = 1;
        dev_kfree_skb_any(skb);
        dev->net->stats.rx_errors++;
        DBG(dev, "rx status %d\n", status);
        break;
    }

clean:
    spin_lock(&dev->req_lock);
    list_add(&req->list, &dev->rx_reqs);
    spin_unlock(&dev->req_lock);

    if (queue)
        queue_work(uether_wq, &dev->rx_work);
}

开发者ID:jekapaty，项目名称:SebastianFM-kernel，代码行数:70，代码来源:u_ether.c

示例4: rx_complete

static void rx_complete(struct pci_ep *ep, struct pci_request *req)
{
	struct sk_buff	*skb = req->context;
	struct eth_dev	*dev = ep->driver_data;
	int		status = req->status;
	unsigned int *temp;
//	printk("%s:%d\n", __func__, __LINE__);
	total_rx_complete++;
	switch (status) {

	/* normal completion */
	case 0:
		skb_put(skb, req->actual);
		if (dev->unwrap)
			status = dev->unwrap(skb);
		if (status < 0
				|| ETH_HLEN > skb->len
				|| skb->len > ETH_FRAME_LEN) {
			dev->net->stats.rx_errors++;
			dev->net->stats.rx_length_errors++;
			DBG(dev, "rx length %d\n", skb->len);
			break;
		}

		skb->protocol = eth_type_trans(skb, dev->net);
		dev->net->stats.rx_packets++;
		dev->net->stats.rx_bytes += skb->len;
		temp = (unsigned int *)skb->data;
//		printk("temp = %p, Data [0] = %x, [1] = %x [2] = %x, [3] = %x [4] = %x, [5] = %x [6] = %x, [7] = %x\n", temp,
//			temp[0], temp[1], temp[2], temp[3], temp[4], temp[5], temp[6], temp[7]);

		/* no buffer copies needed, unless hardware can't
		 * use skb buffers.
		 */
		status = netif_rx(skb);
		skb = NULL;
		break;

	/* software-driven interface shutdown */
	case -ECONNRESET:		/* unlink */
	case -ESHUTDOWN:		/* disconnect etc */
		VDBG(dev, "rx shutdown, code %d\n", status);
		goto quiesce;

	/* for hardware automagic (such as pxa) */
	case -ECONNABORTED:		/* endpoint reset */
		DBG(dev, "rx %s reset\n", ep->name);
		defer_kevent(dev, WORK_RX_MEMORY);
quiesce:
		dev_kfree_skb_any(skb);
		goto clean;

	/* data overrun */
	case -EOVERFLOW:
		dev->net->stats.rx_over_errors++;
		/* FALLTHROUGH */

	default:
		dev->net->stats.rx_errors++;
		DBG(dev, "rx status %d\n", status);
		break;
	}

	if (skb)
		dev_kfree_skb_any(skb);
	if (!netif_running(dev->net)) {
clean:
		spin_lock(&dev->req_lock);
		list_add(&req->list, &dev->rx_reqs);
		spin_unlock(&dev->req_lock);
		req = NULL;
	}
	if (req)
		rx_submit(dev, req, GFP_ATOMIC);
}

开发者ID:KHATEEBNSIT，项目名称:lsdk_ar9531，代码行数:75，代码来源:u_ether.c

示例5: rx_complete

static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
#ifdef CONFIG_USB_RNDIS_MULTIPACKET
	struct sk_buff	*skb = req->context;
	bool		queue = 0;
#else
	struct sk_buff	*skb = req->context, *skb2;
#endif
	struct eth_dev	*dev = ep->driver_data;
	int		status = req->status;
	switch (status) {

	/* normal completion */
	case 0:
		skb_put(skb, req->actual);

		if (dev->unwrap) {
			unsigned long	flags;

			spin_lock_irqsave(&dev->lock, flags);
			if (dev->port_usb) {
				status = dev->unwrap(dev->port_usb,
							skb,
							&dev->rx_frames);
#ifdef CONFIG_USB_RNDIS_MULTIPACKET
				if (status == -EINVAL)
					dev->net->stats.rx_errors++;
				else if (status == -EOVERFLOW)
					dev->net->stats.rx_over_errors++;
#endif
			} else {
				dev_kfree_skb_any(skb);
				status = -ENOTCONN;
			}
			spin_unlock_irqrestore(&dev->lock, flags);
		} else {
			skb_queue_tail(&dev->rx_frames, skb);
		}
#ifdef CONFIG_USB_RNDIS_MULTIPACKET

		if (!status)
			queue = 1;
#else
		skb = NULL;

		skb2 = skb_dequeue(&dev->rx_frames);
		while (skb2) {
			if (status < 0
					|| ETH_HLEN > skb2->len
					|| skb2->len > VLAN_ETH_FRAME_LEN) {
#ifdef CONFIG_USB_NCM_SUPPORT_MTU_CHANGE
				/*
					Need to revisit net->mtu  does not include header size incase of changed MTU
				*/
				if(!strcmp(dev->port_usb->func.name,"ncm")) {
					if (status < 0
						|| ETH_HLEN > skb2->len
						|| skb2->len > (dev->net->mtu + ETH_HLEN)) {
						printk(KERN_DEBUG "usb: %s  drop incase of NCM rx length %d\n",__func__,skb2->len);
					} else {
						printk(KERN_DEBUG "usb: %s  Dont drop incase of NCM rx length %d\n",__func__,skb2->len);
						goto process_frame;
					}
				}
				printk(KERN_DEBUG "usb: %s Drop rx length %d\n",__func__,skb2->len);
#endif
				dev->net->stats.rx_errors++;
				dev->net->stats.rx_length_errors++;
				DBG(dev, "rx length %d\n", skb2->len);
				dev_kfree_skb_any(skb2);
				goto next_frame;
			}
#ifdef CONFIG_USB_NCM_SUPPORT_MTU_CHANGE
process_frame:
#endif
			skb2->protocol = eth_type_trans(skb2, dev->net);
			dev->net->stats.rx_packets++;
			dev->net->stats.rx_bytes += skb2->len;

			/* no buffer copies needed, unless hardware can't
			 * use skb buffers.
			 */
			status = netif_rx(skb2);
next_frame:
			skb2 = skb_dequeue(&dev->rx_frames);
		}
#endif
		break;

	/* software-driven interface shutdown */
	case -ECONNRESET:		/* unlink */
	case -ESHUTDOWN:		/* disconnect etc */
		VDBG(dev, "rx shutdown, code %d\n", status);
		goto quiesce;

	/* for hardware automagic (such as pxa) */
	case -ECONNABORTED:		/* endpoint reset */
		DBG(dev, "rx %s reset\n", ep->name);
		defer_kevent(dev, WORK_RX_MEMORY);
quiesce:
//.........这里部分代码省略.........

开发者ID:BigBot96，项目名称:android_kernel_samsung_gts2wifi，代码行数:101，代码来源:u_ether.c

示例6: rx_complete

static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
	struct sk_buff	*skb = req->context;
	struct eth_dev	*dev = ep->driver_data;
	int		status = req->status;

	switch (status) {

	/* normal completion */
	case 0:
#ifdef SKB_MEMCOPY
		if(req->buf != skb->data)
			memcpy(skb->data, req->buf, req->actual);
#endif
		skb_put(skb, req->actual);
		if (dev->unwrap)
			status = dev->unwrap(skb);
		if (status < 0
				|| ETH_HLEN > skb->len
				|| skb->len > ETH_FRAME_LEN) {
			dev->net->stats.rx_errors++;
			dev->net->stats.rx_length_errors++;
			DBG(dev, "rx length %d\n", skb->len);
			break;
		}

		skb->protocol = eth_type_trans(skb, dev->net);
		dev->net->stats.rx_packets++;
		dev->net->stats.rx_bytes += skb->len;

		/* no buffer copies needed, unless hardware can't
		 * use skb buffers.
		 */
		status = netif_rx(skb);
#ifdef SKB_MEMCOPY
		if(req->buf != skb->data)
			kfree(req->buf);
#endif
		skb = NULL;
		break;

	/* software-driven interface shutdown */
	case -ECONNRESET:		/* unlink */
	case -ESHUTDOWN:		/* disconnect etc */
		VDBG(dev, "rx shutdown, code %d\n", status);
		goto quiesce;

	/* for hardware automagic (such as pxa) */
	case -ECONNABORTED:		/* endpoint reset */
		DBG(dev, "rx %s reset\n", ep->name);
		defer_kevent(dev, WORK_RX_MEMORY);
quiesce:
		dev_kfree_skb_any(skb);
#ifdef SKB_MEMCOPY
		if(req->buf != skb->data)
			kfree(req->buf);
#endif
		goto clean;

	/* data overrun */
	case -EOVERFLOW:
		dev->net->stats.rx_over_errors++;
		/* FALLTHROUGH */

	default:
		dev->net->stats.rx_errors++;
		DBG(dev, "rx status %d\n", status);
		break;
	}

	if (skb) {
		dev_kfree_skb_any(skb);
#ifdef SKB_MEMCOPY
		if(req->buf != skb->data)
			kfree(req->buf);
#endif
	}
	if (!netif_running(dev->net)) {
clean:
		spin_lock(&dev->req_lock);
		list_add(&req->list, &dev->rx_reqs);
		spin_unlock(&dev->req_lock);
		req = NULL;
	}
	if (req)
		rx_submit(dev, req, GFP_ATOMIC);
}

开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:87，代码来源:u_ether_fixed_MAC.c

示例7: rx_submit

static int
rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
{
	struct sk_buff	*skb;
	int		retval = -ENOMEM;
	size_t		size = 0;
	struct usb_ep	*out;
	unsigned long	flags;
	unsigned short reserve_headroom;

	spin_lock_irqsave(&dev->lock, flags);
	if (dev->port_usb)
		out = dev->port_usb->out_ep;
	else
		out = NULL;
	spin_unlock_irqrestore(&dev->lock, flags);

	if (!out)
		return -ENOTCONN;


	size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA;
	size += dev->port_usb->header_len;
	size += out->maxpacket - 1;
	size -= size % out->maxpacket;

	if (dev->ul_max_pkts_per_xfer)
		size *= dev->ul_max_pkts_per_xfer;

	if (dev->port_usb->is_fixed)
		size = max_t(size_t, size, dev->port_usb->fixed_out_len);

	if (dev->rx_needed_headroom)
		reserve_headroom = dev->rx_needed_headroom;
	else
		reserve_headroom = NET_IP_ALIGN;

	pr_debug("%s: size: %zu + %d(hr)", __func__, size, reserve_headroom);

	skb = alloc_skb(size + reserve_headroom, gfp_flags);
	if (skb == NULL) {
		DBG(dev, "no rx skb\n");
		goto enomem;
	}

	skb_reserve(skb, reserve_headroom);

	req->buf = skb->data;
	req->length = size;
	req->context = skb;

	retval = usb_ep_queue(out, req, gfp_flags);
	if (retval == -ENOMEM)
enomem:
		defer_kevent(dev, WORK_RX_MEMORY);
	if (retval) {
		DBG(dev, "rx submit --> %d\n", retval);
		if (skb)
			dev_kfree_skb_any(skb);
	}
	return retval;
}

开发者ID:SiddheshK15，项目名称:kernel_htc_820，代码行数:62，代码来源:u_ether.c

注：本文中的defer_kevent函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ deferred_push_dlist函数代码示例发布时间：2022-05-30

C++ defer_bh函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19254|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10006|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8650|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9676|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ defer_kevent函数代码示例

示例1: rx_complete

示例2: rx_submit

示例3: rx_complete

示例4: rx_complete

示例5: rx_complete

示例6: rx_complete

示例7: rx_submit

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

armancodv/building-energy-model-matlab:

鲁东大学一米网:Win7系统USB驱动器RAM的操

每的笔顺,概括每的笔画,理会每的部首

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053