C++ decshaped_pulse函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中decshaped_pulse函数的典型用法代码示例。如果您正苦于以下问题：C++ decshaped_pulse函数的具体用法？C++ decshaped_pulse怎么用？C++ decshaped_pulse使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了decshaped_pulse函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: pulsesequence

void pulsesequence()
{
    char pwpat[MAXSTR],p1pat[MAXSTR];
    /* equilibrium period */
    getstr("pwpat",pwpat);
    if (pwpat[0] == '\0') 
    {
      abort_message("no pwpat? ABORT");
    }
    getstr("p1pat",p1pat);
    if (p1pat[0] == '\0')
    {
      abort_message("no p1pat? ABORT");
    }
      
    status(A);
    obspower(zero);
    decpower(tpwr);
    hsdelay(d1);
    rcvroff();

    status(B);
      if (is_y(rfwg[1])) decshaped_pulse(p1pat,p1,zero,rof1,rof2);
      else apshaped_decpulse(p1pat,p1,zero,t1,t2,rof1,rof2);
      hsdelay(d2);
    status(C);
      if (is_y(rfwg[1])) decshaped_pulse(pwpat,pw,oph,rof1,rof2);
      else apshaped_decpulse(pwpat,pw,oph,t1,t2,rof1,rof2);
}

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:29，代码来源:ATdsh2pul.c

示例2: dec_c13_shpulse

double dec_c13_shpulse(shape pwxshape, codeint phase) 
{
 
 decpower(pwxshape.pwr);
 decshaped_pulse(pwxshape.name, pwxshape.pw, phase, 0.0, 0.0);
 decpower(getval("pwClvl"));
 return(pwxshape.pw + 2.0*POWER_DELAY +WFG_STOP_DELAY + WFG_START_DELAY);
}

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:8，代码来源:hNCAnH_A.c

示例3: pulsesequence


//.........这里部分代码省略.........
        delay(timeTC -tau1 - 202.0e-6 - gt7-2.0*POWER_DELAY-pwC9a-
	  WFG_START_DELAY-WFG_STOP_DELAY-2.0e-6-SAPS_DELAY);
      }
    }
    else {
      if (dm3[B]=='y') {
	rgpulse(pwHd,one,0.0,0.0);
        txphase(zero);
        delay(2.0e-6);
        obsprgon("waltz16", pwHd, 90.0);
        xmtron();

          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        delay(timeTC-tau1-202.0e-6-gt7-2.0*WFG_START_DELAY-4.0e-6-1/dmf3-pwHd-
	           PRG_START_DELAY-2.0*POWER_DELAY-pwC9a-2.0e-6-SAPS_DELAY);
      }
      else {
        delay(2.0e-6);
        rgpulse(pwHd,one,0.0,0.0);
        txphase(zero);
        delay(2.0e-6);
        obsprgon("waltz16", pwHd, 90.0);
        xmtron();
        delay(timeTC-tau1-202.0e-6-gt7-4.0e-6-pwHd-PRG_START_DELAY-
	  2.0*POWER_DELAY-pwC9a-WFG_START_DELAY-WFG_STOP_DELAY-SAPS_DELAY);
      }
    }
    decpwrf(rf9);

    decshaped_pulse("offC9",pwC9a,zero,0.0,0.0); 
    initval(phshift9, v9);
    decstepsize(1.0);
    dcplrphase(v9);                                         /* SAPS_DELAY */

}  /* %%%%%%%%%%%%%%%%%%ENDING 13Ca Constant Time EVOLUTION %%%%%%%%%%%%%%%%%%*/


  decphase(t5);
  decpwrf(rf1);
  decrgpulse(pwC1, t5, 2.0e-6, 0.0);

  dec2phase(t8);
  dcplrphase(zero);

        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
           {
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           lk_autotrig();   /* resumes lock pulsing */
           }
  if (h1dec[0]=='y')
  {
    xmtroff();
    obsprgoff();
    rgpulse(pwHd,three,2.0e-6,0.0);
    txphase(one);
  }

  delay(2.0e-6);
  zgradpulse(gzlvl4, gt4);
  delay(2.0e-4);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghn_ca_CT.c

示例4: pulsesequence


//.........这里部分代码省略.........
    if (tpwrsf<4095.0)
    {
        obspower(tpwrs+6.0);
        obspwrf(tpwrsf);
        shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
        obspower(tpwr);
        obspwrf(4095.0);
    }
    else
    {
        obspower(tpwrs);
        shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
        obspower(tpwr);
    }
    zgradpulse(gzlvl3, gt3);
    dec2phase(t3);
    decpwrf(rfst);
    decoffset(dof100);
    delay(2.0e-4);
    dec2rgpulse(pwN, t3, 0.0, 0.0);
    decphase(zero);


    /*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

    txphase(zero);
    dec2phase(t9);

    if (NH2only[A]=='y')
    {
        delay(tau2);
        /* optional sech/tanh pulse in middle of t2 */
        if (C13refoc[A]=='y') 				   /* WFG_START_DELAY */
        {   decshaped_pulse("stC200", 1.0e-3, zero, 0.0, 0.0);
            delay(tNH - 1.0e-3 - WFG_START_DELAY - 2.0*pw);
        }
        else
        {
            delay(tNH - 2.0*pw);
        }
        rgpulse(2.0*pw, zero, 0.0, 0.0);
        if (tNH < gt1 + 1.99e-4)  delay(gt1 + 1.99e-4 - tNH);

        delay(tau2);

        dec2rgpulse(2.0*pwN, t9, 0.0, 0.0);
        if (mag_flg[A] == 'y')
        {
            magradpulse(gzcal*gzlvl1, gt1);
        }
        else
        {
            zgradpulse(gzlvl1, gt1);
        }
        dec2phase(t10);
        if (tNH > gt1 + 1.99e-4)  delay(tNH - gt1 - 2.0*GRADIENT_DELAY);
        else   delay(1.99e-4 - 2.0*GRADIENT_DELAY);
    }

    else
    {
        if ( (C13refoc[A]=='y') && (tau2 > 0.5e-3 + WFG2_START_DELAY) )
        {   delay(tau2 - 0.5e-3 - WFG2_START_DELAY); /* WFG2_START_DELAY */
            simshaped_pulse("", "stC200", 2.0*pw, 1.0e-3, zero, zero, 0.0, 0.0);
            delay(tau2 - 0.5e-3);
            delay(gt1 + 2.0e-4);

开发者ID:timburrow，项目名称:ovj3，代码行数:67，代码来源:gnoesyNhsqcA.c

示例5: pulsesequence


//.........这里部分代码省略.........
        decphase(zero);
        txphase(zero);
	decpwrf(rf10);
	delay(tau2);
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC10", "", 2.0*pw, pwC10, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
        if(pwC10>2.0*pwN) pwZ=0.0; else pwZ=2.0*pwN - pwC10;

	delay(tau2);
	decpwrf(rf0);
                if (mag_flg[A] == 'y')
                {
                   magradpulse(-icosel2*gzcal*gzlvl2, 1.8*gt1);
                }
                else
                {
                   zgradpulse(-icosel2*gzlvl2, 1.8*gt1);
                }
	delay(2.02e-4);

	decrgpulse(2.0*pwC, zero, 0.0, 0.0);

	decpwrf(rf10);
                if (mag_flg[A] == 'y')
                {
                   magradpulse(icosel2*gzcal*gzlvl2, 1.8*gt1);
                }
                else
                {
                   zgradpulse(icosel2*gzlvl2, 1.8*gt1);
                }
	delay(2.0e-4 + WFG3_START_DELAY + pwZ);

	decshaped_pulse("offC10", pwC10, zero, 0.0, 0.0);
	decpwrf(rf0);
	decrgpulse(pwC, zero, 2.0e-6, 0.0);

	zgradpulse(gzlvl5, gt5);
	delay(0.5*del1 - gt5);

	simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	decphase(t10);
	delay(0.5*del1 - gt5);

	simpulse(pw, pwC, one, t10, 0.0, 0.0);

	zgradpulse(gzlvl6, gt5);
	txphase(zero);
	decphase(zero);
	delay(0.5*del2 - gt5);

	simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl6, gt5);
	delay(0.5*del2 - gt5);

	simpulse(pw, pwC, zero, zero, 0.0, 0.0);

	delay(0.5*del - 0.5*pwC);

	simpulse(2.0*pw,2.0*pwC, zero, zero, 0.0, 0.0);
        if (mag_flg[A] == 'y')
            magradpulse(gzcal*gzlvl1, gt1);

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghcch_tocsyA.c

示例6: pulsesequence

void pulsesequence()
{
  double   tpwr180r = getval("tpwr180r"),
           pw180r = getval("pw180r"),
	   pwx180 = getval("dnbippw"),
	   pwxlvl180 = getval("dnbippwr"),
           pp = getval("pp"),
           pplvl = getval("pplvl"),
	   tauC = getval("tauC"),
	   tau;
  int      prgcycle=(int)(getval("prgcycle")+0.5);
  char     pw180ref[MAXSTR],
	   dnbipshp[MAXSTR],
	   bipflg[MAXSTR];

  getstr("pw180ref", pw180ref);
  getstr("dnbipshp", dnbipshp);
  getstr("bipflg",bipflg);
  tau    = 1.0 / (2.0 * (getval("j1xh")));

  assign(ct,v17);
  assign(zero,v18);
  assign(zero,v19);

  if (getflag("prgflg") && getflag("satmode") && (prgcycle > 1.5))
    {
        hlv(ct,v17);
        mod2(ct,v18); dbl(v18,v18);
        if (prgcycle > 2.5)
           {
                hlv(v17,v17);
                hlv(ct,v19); mod2(v19,v19); dbl(v19,v19);
           }
     }

  settable(t1,4,phs1);
  settable(t2,8,phs2);
  settable(t3,4,phs3);
  getelem(t1,v17,v1);
  getelem(t2,v17,v2);
  getelem(t3,v17,v3);
  assign(v1,oph);
  add(oph,v18,oph);
  add(oph,v19,oph);

  if (getflag("prgflg") && getflag("satmode"))
        assign(v3,v2);

   /* equilibrium period */
   status(A);

   delay(5.0e-5);
   if (getflag("sspul"))
        steadystate();

   if (getflag("satmode"))
     {
        if ((d1-satdly) > 0.02)
                delay(d1-satdly);
        else
                delay(0.02);
        if (getflag("slpsat"))
           {
                shaped_satpulse("relaxD",satdly,v2);
                if (getflag("prgflg"))
                   shaped_purge(v1,v2,v18,v19);
           }
        else
           {
                satpulse(satdly,v2,rof1,rof1);
                if (getflag("prgflg"))
                   purge(v1,v2,v18,v19);
           }
     }
   else
	delay(d1);

   if (getflag("wet"))
     wet4(zero,one);

   status(B);

	obspower(tpwr);
	if (bipflg[1] == 'y')
	    decpower(pwxlvl180);
	else
	    decpower(pplvl);

        rgpulse(pw,v1,rof1,rof1);
	if (bipflg[1] == 'y')
	    { 
		decshaped_pulse(dnbipshp,pwx180,zero,2.0e-6,2.0e-6);
		delay(tau+tauC);
	    }
	else
	    {
	    	decrgpulse(2*pp,zero,2.0e-6,2.0e-6);
		delay(tau);
	    }
	obspower(tpwr180r);
//.........这里部分代码省略.........

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:101，代码来源:CRAPT.c

示例7: pulsesequence


//.........这里部分代码省略.........
   /* shaped pulse */

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   delay(0.2e-6);
   zgradpulse(gzlvl5,gt5);
   delay(2.0e-6);

   delay(taua - gt5 - 2.2e-6);   /* taua <= 1/4JNH */ 

   sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);

   txphase(three); dec2phase(zero); decphase(zero); 

   delay(0.2e-6);
   zgradpulse(gzlvl5,gt5);
   delay(200.0e-6);

   delay(taua - gt5 - 200.2e-6 - 2.0e-6); 

   if (sel_flg[A] == 'n') 
     {
      rgpulse(pw,three,2.0e-6,0.0);

      delay(0.2e-6);
      zgradpulse(gzlvl3,gt3);
      delay(200.0e-6);

      dec2rgpulse(pwN,zero,0.0,0.0);

      delay( zeta );
  
      dec2rgpulse(2.0*pwN,zero,0.0,0.0);
      decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);

      delay(zeta -WFG_START_DELAY -pwchirp -WFG_STOP_DELAY -2.0e-6);

     dec2rgpulse(pwN,zero,2.0e-6,0.0);

    }
   else 
    {
     rgpulse(pw,one,2.0e-6,0.0);

     initval(1.0,v3);
     dec2stepsize(45.0); 
     dcplr2phase(v3);

     delay(0.2e-6);
     zgradpulse(gzlvl3,gt3);
     delay(200.0e-6);

     dec2rgpulse(pwN,zero,0.0,0.0);
     dcplr2phase(zero);

     delay(1.34e-3 - SAPS_DELAY - 2.0*pw);

     rgpulse(pw,one,0.0,0.0);
     rgpulse(2.0*pw,zero,0.0,0.0);
     rgpulse(pw,one,0.0,0.0);

     delay( zeta - 1.34e-3 - 2.0*pw);
  
     dec2rgpulse(2.0*pwN,zero,0.0,0.0);
     decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:66，代码来源:ghncoca_sim_trosy_4DA.c

示例8: pulsesequence


//.........这里部分代码省略.........

  /* ===========Beginning of NOE transfer ======= */

      delay(mix - gt4 - gt5 - pwN -pwC - 2.0*gstab);		
      obsoffset(tof);

      zgradpulse(gzlvl4,gt4);
      delay(gstab);

   decrgpulse(pwC, zero, 2.0e-6, 2.0e-6);
   dec2rgpulse(pwN, zero, 2.0e-6, 2.0e-6);

      zgradpulse(gzlvl5,gt5);
      delay(gstab);	
                                            /* H2O relaxes back to +z */

  /* ===========   End of NOE transfer ======= */

   rgpulse(pw, zero, 2.0e-6, 2.0e-6);                           

      zgradpulse(gzlvl6,gt6);
      delay(tauNH - gt6 - 4.0e-6 - 2.0*GRADIENT_DELAY);

   sim3pulse(2.0*pw, 0.0, 2*pwN, zero, zero, zero, 2.0e-6, 2.0e-6);

      delay(tauNH - gt6 - gstab -4.0e-6 - 2.0*GRADIENT_DELAY);
      zgradpulse(gzlvl6,gt6);
      txphase(one);
      delay(gstab);

   rgpulse(pw,one,2.0e-6,2.0e-6);	                    

      txphase(two);
      obspower(tpwrs);

      shaped_pulse("H2Osinc", pwHs, two, 2.0e-6, 2.0e-6);

      obspower(tpwr);
      zgradpulse(gzlvl7,gt7);
      dec2phase(t3);
      decoffset(dofcaco);          /* offset on 120ppm for CaCO decoupling */
      decpwrf(rf200);                             /* fine power for stC200 */
      delay(gstab);			

   dec2rgpulse(pwN,t3,2.0e-6,2.0e-6);

      dec2phase(t4);
      delay(tau3); 

   rgpulse(2.0*pw, zero, 2.0e-6, 2.0e-6);
   decshaped_pulse("stC200", 1.0e-3, zero, 2.0e-6, 2.0e-6);

      delay(tau3);
      delay(gt1 +gstab +8.0e-6 - 1.0e-3 - 2.0*pw);

   dec2rgpulse(2.0*pwN, t4, 2.0e-6, 2.0e-6);

      dec2phase(t5);
      zgradpulse(gzlvl1, gt1);       
      delay(gstab + WFG_START_DELAY + WFG_STOP_DELAY - 2.0*GRADIENT_DELAY);

   sim3pulse(pw, 0.0, pwN, zero, zero, t5, 2.0e-6, 2.0e-6);

      dec2phase(zero);
      zgradpulse(gzlvl8, gt8);
      delay(tauNH - gt8 - 2.0*GRADIENT_DELAY -4.0e-6);

   sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 2.0e-6, 2.0e-6);

      delay(tauNH  - gt8 - gstab -4.0e-6 - 2.0*GRADIENT_DELAY);
      zgradpulse(gzlvl8, gt8);
      txphase(one);    dec2phase(one);
      delay(gstab);

   sim3pulse(pw, 0.0, pwN, one, zero, one, 2.0e-6, 2.0e-6);

      txphase(zero);   dec2phase(zero);
      zgradpulse(gzlvl9, gt9);
      delay(tauNH - gt9 - 2.0*GRADIENT_DELAY -4.0e-6);

   sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 2.0e-6, 2.0e-6);

      delay(tauNH - gt9 - 2.0*GRADIENT_DELAY -gstab -4.0e-6);
      zgradpulse(gzlvl9, gt9);
      delay(gstab);

   rgpulse(pw, zero, 2.0e-6, 2.0e-6);

      delay((gt1/10.0) +gstab -2.0e-6 - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

   rgpulse(2.0*pw, zero, 2.0e-6, 2.0e-6);

      zgradpulse(icosel*gzlvl2, gt1/10.0);    

      dec2power(dpwr2);	
      delay(gstab);

status(C);
      setreceiver(t11);
}

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:101，代码来源:PR42_gChmqcnoesyNhsqcA.c

示例9: pulsesequence


//.........这里部分代码省略.........
   decrgpulse(2.0*pwC, one, 0.2e-6, 0.0);
   decphase(zero);
   decrgpulse(pwC, zero, 0.2e-6, 0.0);
   delay(tau1);
   rgpulse(pw,zero,0.0,0.0);

   delay(mix - gt4 - gt5 - pwN - 2.0e-3);		
   obsoffset(tof);

   zgradpulse(gzlvl4,gt4);
   delay(1.0e-3);
   sim3pulse((double)0.0,pwC,pwN,zero,zero,zero,0.0,2.0e-6);              
   zgradpulse(gzlvl5,gt5);
   delay(1.0e-3);			

   rgpulse(pw,zero,0.0,2.0e-6);		
   zgradpulse(gzlvl6,gt6);
   delay(taunh - gt6 - 2.0e-6);
   sim3pulse(2.0*pw,(double)0.0,2*pwN,zero,zero,zero,0.0,0.0);
   delay(taunh - gt6 - 500.0e-6);
   zgradpulse(gzlvl6,gt6);
   txphase(one);
   delay(500.0e-6);
   rgpulse(pw,one,0.0,0.0);	
   txphase(two);
   obspower(tpwrs);
   shaped_pulse("H2Osinc", pwHs, two, 2.0e-6, 2.0e-6);
   obspower(tpwr);
   zgradpulse(gzlvl7,gt7);	
   dec2phase(t3);
   decoffset(dofcaco);
   decpwrf(rfst);
   delay(200.0e-6);			

   dec2rgpulse(pwN,t3,0.0,0.0);

   dec2phase(t4);
   delay(tau3); 
   rgpulse(2.0*pw, zero, 0.0, 0.0);
   decshaped_pulse("stC200", 1.0e-3, zero, 0.0, 0.0);
   delay(tau3);
   delay(gt1 + 202.0e-6 - 1.0e-3 - 2.0*pw);

   dec2rgpulse(2.0*pwN, t4, 0.0, 2.0e-6);

   dec2phase(t5);
   if(mag_flg[A] == 'y')
   {
      magradpulse(gzcal*gzlvl1, gt1);        
   }
   else
   {
      zgradpulse(gzlvl1, gt1);        
      delay(4.0*GRADIENT_DELAY);
   }
   delay(200.0e-6 + WFG_START_DELAY + WFG_STOP_DELAY - 6.0*GRADIENT_DELAY);

   sim3pulse(pw, 0.0, pwN, zero, zero, t5, 0.0, 2.0e-6);

   dec2phase(zero);
   zgradpulse(gzlvl8, gt8);
   delay(taunh - gt8);
   sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
   delay(taunh  - gt8 - 400.0e-6);
   zgradpulse(gzlvl8, gt8);
   txphase(one);
   dec2phase(one);
   delay(400.0e-6);

   sim3pulse(pw, 0.0, pwN, one, zero, one, 0.0, 0.0);

   txphase(zero);
   dec2phase(zero);
   zgradpulse(gzlvl9, gt9);
   delay(taunh - gt9);
   sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
   zgradpulse(gzlvl9, gt9);
   delay(taunh - gt9);

   rgpulse(pw, zero, 0.0, 0.0);

   delay((gt1/10.0) + gstab - 0.5*pw + 6.0*GRADIENT_DELAY + POWER_DELAY);

   rgpulse(2.0*pw, zero, 0.0, 0.0);

   if(mag_flg[A] == 'y')
   {
      magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);     	
   }
   else
   {
      zgradpulse(icosel*gzlvl2, gt1/10.0);     	
      delay(4.0*GRADIENT_DELAY);
   }
   dec2power(dpwr2);			   
   delay(gstab);		

status(C);
   setreceiver(t11);
}

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:101，代码来源:gChmqcnoesyNhsqcA.c

示例10: pulsesequence


//.........这里部分代码省略.........
   if (ix < (int)(2.0*ni)) lk_hold(); /*force lock sampling at end of experiment*/

   obspower(shlvl1);
   shaped_pulse(shname1,shpw1,zero,2.0e-4,2.0e-6);
   zgradpulse(gzlvl1, gt1);
   delay(1.0e-4);

  if (ni == 0)
  {
       delay(tauch-gt1-1.0e-4-WFG_START_DELAY+pwC*4.0-adjust);
       obspower(shlvl2);
     shaped_pulse(shname2,shpw2,zero,2.0e-6,2.0e-6);
       obspower(shlvl1);
     decrgpulse(pwC,t1,0.0,0.0);
     decrgpulse(pwC*2.0,zero,0.0,0.0);
     decrgpulse(pwC,zero,0.0,0.0);
  }

else
  {
  delay(tauch-gt1-1.0e-4-adjust);
  obspower(shlvl2);
  status(B);

  if(CT_flg[0] == 'y')
   {
    /*************************************************/
    /****           CT EVOLUTION            **********/
    /*************************************************/

     decrgpulse(pwC,t1,0.0,0.0);
     delay((CT_delay-tau1)*0.25-pwC*2.0/3.0);
     decpower(shlvl3);
     decshaped_pulse(shname3,shpw3,zero,0.0,0.0);
     delay((CT_delay+tau1)*0.25-shpw2*0.5);
     shapedpulse(shname2,shpw2,zero,0.0,0.0);
     delay((CT_delay+tau1)*0.25-shpw2*0.5);
     decshaped_pulse(shname3,shpw3,zero,0.0,0.0);
     decpower(pwClvl);
     delay((CT_delay-tau1)*0.25-pwC*2.0/3.0);
     decrgpulse(pwC,zero,0.0,0.0);
    }
   
   else
   {
    /*************************************************/
    /****     REAL-TIME EVOLUTION           **********/
    /*************************************************/
     if ((tau1) > shpw2)
    {
     decrgpulse(pwC,t1,0.0,0.0);
      if(Cdecflg[0] == 'y')
      {
      decpower(getval("Cdecpwr"));
      decprgon(Cdecseq, 1.0/getval("Cdecdmf"), getval("Cdecres"));
      decon();
      }
     delay((tau1-shpw2)*0.5);

    xmtrphase(zero);
    xmtron();
    obsunblank();
    obsprgon(shname2,1/shdmf2,9.0);
    delay(shpw2);
    obsprgoff();
    obsblank();

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:sofastCmhmqc.c

示例11: pulsesequence


//.........这里部分代码省略.........
   delay(TC - taub 
           - gt4 - 102e-6
           - PRG_STOP_DELAY - POWER_DELAY - pwd1
           - 4.0e-6 - POWER_DELAY - 4.0e-6 - WFG_START_DELAY);

   /* 2D decoupling off */
   dec3off();
   dec3prgoff();
   dec3blank();
   dec3phase(three);
   dec3power(dpwr3);
   dec3rgpulse(pwd1,three,4.0e-6,0.0);
   /* 2D decoupling off */

   ifzero(v1);

   delay(2.0e-6);
   zgradpulse(gzlvl4,gt4);
   delay(gstab);

   elsenz(v1);

   delay(2.0e-6);
   zgradpulse(-1.0*gzlvl4,gt4);
   delay(gstab);

  endif(v1);

   initval(1.0,v3);
   decstepsize(353.0);
   dcplrphase(v3); 

   decpower(d_ca180);
   decshaped_pulse(shca180,pwca180,zero,4.0e-6,0.0);
   dcplrphase(zero); 

   ifzero(v1);

   delay(2.0e-6);
   zgradpulse(gzlvl4,gt4);
   delay(gstab);

   elsenz(v1);

   delay(2.0e-6);
   zgradpulse(-1.0*gzlvl4,gt4);
   delay(gstab);

  endif(v1);

   /* 2D decoupling on */  
   dec3phase(one);
   dec3power(dpwr3);
   dec3rgpulse(pwd1,one,4.0e-6,0.0);
   dec3phase(zero);
   dec3unblank();
   dec3power(dpwr3_D);   /* keep power down */ 
   dec3prgon(ddseq,pwd,dresD);
   dec3on();
   /* 2D decoupling on */

    delay(TC - taud - WFG_STOP_DELAY - gt4 - 102e-6
            - POWER_DELAY - 4.0e-6 - pwd1 - POWER_DELAY 
            - PRG_START_DELAY); 

   /* 2D decoupling off */

开发者ID:OpenVnmrJ，项目名称:OpenVnmrJ，代码行数:67，代码来源:T2D.c

示例12: pulsesequence

pulsesequence()
{
   double          tau, rg1 = 2.0e-6,
                   jXH = getval("jXH"),
                   mult = getval("mult"),
                   gt0 = getval("gt0"),
                   gzlvl0 = getval("gzlvl0"),
                   gt1 = getval("gt1"),
                   gzlvl1 = getval("gzlvl1"),
                   gt2 = getval("gt2"),
                   gzlvl2 = getval("gzlvl2"),
                   gt3 = getval("gt3"),
                   gzlvl3 = getval("gzlvl3"),
                   Gratio = getval("Gratio"),
                   gstab = getval("gstab"),
                   compH = getval("compH"),
                   compX = getval("compX"),
                   Hpwr = getval("Hpwr"),
		   jevol = 0.25 / 140.0;    /* default for C-13 */

   char            pshape[MAXSTR], zz[MAXSTR], ad180[MAXSTR], sspul[MAXSTR];
   shape           hdx;                     /* HADAMARD stuff */
   void            setphases();

   getstr("pshape", pshape);              /* pulse shape as in wavelib */
   getstr("sspul", sspul);
   getstr("zz", zz);
   getstr("ad180", ad180);
   if (jXH > 0.0) jevol = 0.25 / jXH;
   
   tau = gt3 + gstab;
   if (mult > 0.5)
    tau = 2*jevol;

   setphases();

   /* MAKE PBOX SHAPES */

   if (FIRST_FID)
   {
     ad180sh = pbox_ad180("ad180", pwx, pwxlvl);    /* make adiabatic 180 */
     if (strcmp(pwpat,"Hdec") == 0)
     {
       /* make H decoupling shape */
       Hdec = pboxHT_dec(pwpat, pshape, jXH, 20.0, pw, compH, tpwr);
       Hpwr = Hdec.pwr;
     }
   }

   hdx = pboxHT_F1i(pshape, pwx*compX, pwxlvl);         /* HADAMARD stuff */
   if (getval("htcal1") > 0.5)           /* enable manual power calibration */
     hdx.pwr += getval("htpwr1");

 /* THE PULSE PROGRAMM STARTS HERE */
   status(A);

    delay(5.0e-5);
    zgradpulse(gzlvl0,gt0);
    if (sspul[0] == 'y')
    {
      rgpulse(pw,zero,rof1,rof1);
      zgradpulse(gzlvl0,gt0);
    }

    pre_sat();
      
    if (getflag("wet"))
      wet4(zero,one);

   decoffset(dof);
   decpower(pwxlvl);
   obspower(tpwr);
   obsoffset(tof);
   delay(2.0e-5);
 
   status(B);

   rgpulse(pw, v2, rg1, rg1);
   delay(jevol - ad180sh.pw/2.0 - 3.0*rg1); /* +rg on both sides */
   decshaped_pulse(ad180sh.name, ad180sh.pw, zero, rg1, rg1);
   rgpulse(2.0*pw, zero, rg1, rg1);
   delay(jevol + ad180sh.pw/2.0 - rg1);
   rgpulse(pw, one, rg1, rg1);

   zgradpulse(-gzlvl2, gt2);
   delay(gstab);

   decpower(hdx.pwr);
   if (strcmp(pwpat,"") == 0)
     decshaped_pulse(hdx.name, hdx.pw, zero, rg1, rg1);
   else
   {
     obspower(Hpwr);
     simshaped_pulse(pwpat, hdx.name, hdx.pw, hdx.pw, zero, zero, rg1, rg1);
   }
   zgradpulse(gzlvl2*1.4, gt2);
   decpower(pwxlvl); obspower(tpwr);

   if((zz[A] == 'y') && (mult == 0)) 
   {
//.........这里部分代码省略.........

开发者ID:timburrow，项目名称:ovj3，代码行数:101，代码来源:hsqcHT.c

示例13: pulsesequence


//.........这里部分代码省略.........
	
        zgradpulse(gzlvl5*1.2,gt5);
	dec2phase(t4);
	delay(gstab);

        sim3pulse(0.0,0.0,2.0*pwN,zero,zero,t4,rof1,rof1); /* 180 15N */

        zgradpulse(gzlvl5*1.2,gt5);
	delay(gstab);
	
	delay(0.5*taunco - gt5 - gstab - 0.5*pw180onco); /* 1/8J(NCO) */
	
	sim3pulse(0.0*pw,pw180onco,0.0,zero,zero,zero,rof1,rof1);  /* 180 CO */

	delay(0.5*taunco - gt5 - gstab - 0.5*pw180onco - POWER_DELAY); /* 1/8J(NCO) */

        decpwrf(rf180offca);   
        zgradpulse(gzlvl5*1.2,gt5);
	delay(gstab);	

        decphase(t5); 
       	dec2phase(zero);
       
       	dec2rgpulse(pwN,zero,0.0,0.0); /* purge for 15N */
    }

        zgradpulse(gzlvl3*1.3,gt3);
        delay(gstab);

       	dec2rgpulse(pwN,t1,0.0,0.0); /* read for 15N */
   
       delay(tau1);
       
       decshaped_pulse("offC3",pw180offca,t5,0.0,0.0);
       
       delay((1-kappa)*tau1);
   
       zgradpulse(gzlvl1,gt1);
       delay(gstab);

       dec2phase(zero);
       dec2rgpulse(2.0*pwN,zero,0.0,0.0);

       delay(gt1 + gstab + (4.0/PI)*pwN + WFG_START_DELAY + pw180offca - kappa*tau1);

 
   sim3pulse(pw,0.0,0.0,t2,zero,zero,rof1,rof1);  /* Pulse for 1H  */ 
 
   zgradpulse(gzlvl5,gt5);
   delay(gstab);

  delay(tauhn - gt5 - gstab);  /* delay=1/4J (NH) */

  sim3pulse(2.0*pw,0.0,2.0*pwN,zero,zero,zero,rof1,rof1);

  txphase(zero); 
  dec2phase(zero);

  delay(tauhn - gt5 - gstab); /* 1/4J (NH)  */

  zgradpulse(gzlvl5,gt5);
  delay(gstab);

  txphase(one);

  sim3pulse(pw,0.0,pwN,one,zero,zero,rof1,rof1); /* 90 for 1H and 15N */

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghn_Jnco_2DS3.c

示例14: pulsesequence


//.........这里部分代码省略.........
    /*** purge   */
    dec2power(pwNlvl);
    dec2pwrf(4095.0);
    txphase(zero);
    decphase(t2);
    delay(gstab);
    zgradpulse(gzlvl2, gt2);

    delay(3.0*gstab);


    /*  evolution on t1 */

    /* real time here */
    if(CT[A]=='n')
    {
        decrgpulse(pwC, t2, 0.0, 0.0);
        decphase(zero);
        decpower(pwC180lvl);
        decpwrf(pwC180lvlF);

        delay(tau1);
        obsunblank();
        rgpulse(pw,one,rof1,0.0);
        rgpulse(2.0*pw,zero,0.0,0.0);
        rgpulse(pw,one,0.0,rof1);
        obsblank();

        if(refocN15[A]=='y') dec2rgpulse(2.0*pwN,zero,0.0,0.0); /*n15 refocusing */

        if(refocCO[A]=='y')
        {
            decpower(pwCOlvl);
            decshaped_pulse(COshape,pwCO,zero, 3.0e-6, 3.0e-6);
            decpower(pwC180lvl);
        }


        delay(tau1);


        /*************** CODING with CLUB sandwitches and BIPS */


        zgradpulse(gzlvl3*icosel, gt3);
        delay(gstab1);
        decshaped_pulse(C180shape,pwC180,zero, 0.0, 0.0);
        zgradpulse(-gzlvl3*icosel, gt3);

        delay(gstab1 +rof1*2.0+pw*4.0 +pwC*4.0/M_PI +2.0*POWER_DELAY+2.0*PWRF_DELAY);

        if(refocN15[A]=='y') delay(2.0*pwN); /*n15 refocusing */
        if(refocCO[A]=='y') /* ghost CO pulse */
        {
            decpower(pwCOlvl);
            decshaped_pulse(COshape,pwCO,zero, 3.0e-6, 3.0e-6);
            decpower(pwC180lvl);
        }


        zgradpulse(-gzlvl3*icosel, gt3);
        delay(gstab1);
        decshaped_pulse(C180shape,pwC180,zero, 0.0, 0.0);
        zgradpulse( gzlvl3*icosel, gt3);
        decpower(pwClvl);
        decpwrf(4095.0);

开发者ID:timburrow，项目名称:ovj3，代码行数:67，代码来源:gChsqc_BB.c

示例15: pulsesequence


//.........这里部分代码省略.........
     {
        if ((d1-satdly) > 0.02)
                delay(d1-satdly);
        else
                delay(0.02);
        if (getflag("slpsat"))
           {
                shaped_satpulse("relaxD",satdly,zero);
                if (getflag("prgflg"))
                   shaped_purge(v1,zero,v18,v19);
           }
        else
           {
                satpulse(satdly,zero,rof1,rof1);
                if (getflag("prgflg"))
                   purge(v1,zero,v18,v19);
           }
     }
   else
        delay(d1);

   if (getflag("wet"))
     wet4(zero,one);

   decpower(pwxlvl);

  status(B);

    if (getflag("nullflg"))
    {
      rgpulse(0.5 * pw, zero, rof1, rof1);
      delay(2 * bird);
      decpower(pwxlvl180);
      decshaped_pulse(pwx180ad, pwx180, zero, rof1, rof1);
      rgpulse(2.0 * pw, zero, rof1, rof1);
      delay(2 * bird + 2 * POWER_DELAY);
      decshaped_pulse(pwx180adR, pwx180, zero, rof1, rof1);
      decpower(pwxlvl);
      rgpulse(1.5 * pw, zero, rof1, rof1);
      zgradpulse(hsglvl, hsgt);
      delay(1e-3);
    }

    if (getflag("cpmgflg"))
    {
       rgpulse(pw, v1, rof1, 0.0);
       cpmg(v1, v15);
    }
    else
       rgpulse(pw, v1, rof1, rof1);
    delay(tau/2 - gtA - gstab);
    delay(jdly/4);

        zgradpulse(gzlvlA,gtA);
        delay(gstab);
        obspower(selpwrA);
        decpower(pwxlvl180);
        decshaped_pulse(pwx180ad, pwx180, zero, rof1, rof1);
        shaped_pulse(selshapeA,selpwA,zero,rof1,rof1);
        zgradpulse(gzlvlA,gtA);
        delay(gstab);

    delay(tau/2 - gtA - gstab);
    delay(jdly/2);
    delay(tau/2 - gtB - gstab);

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:66，代码来源:EXSIDE.c

示例16: pulsesequence


//.........这里部分代码省略.........
   delay(taua - gt1 -gstab); 

   simpulse(2.0*pw,2.0*pwC,zero,zero,0.0,0.0);
   txphase(one);

   delay(taua - gt1 - gstab); 
   	
   zgradpulse(gzlvl1,gt1);
   delay(gstab);


   rgpulse(pw,one,0.0,0.0);

   /* shaped_pulse */
   obspower(tpwrs);
   shaped_pulse("H2Osinc",pwHs,zero,2.0e-6,0.0);
   obspower(tpwr);
   /* shaped_pulse */

   decoffset(dof);  /* jump 13C to 40 ppm */

   zgradpulse(gzlvl2,gt2);
   delay(gstab);

   decrgpulse(pwC,t1,4.0e-6,0.0); decphase(zero); 

   initval(1.0,v3);
   decstepsize(decstep1);
   dcplrphase(v3);

   decpwrf(rfrb);
   delay(BigTC - POWER_DELAY - WFG_START_DELAY);

   decshaped_pulse(rb180.name,pwcrb180,zero,0.0,0.0);
   dcplrphase(zero);
   decphase(t2);

   decpwrf(4095.0);
   delay(BigTC - WFG_STOP_DELAY - POWER_DELAY);

   decrgpulse(pwC,t2,0.0,0.0);
   decphase(zero);

   /* turn on 2H decoupling */
   dec3phase(one);
   dec3power(dpwr3); 
   dec3rgpulse(pwd1,one,4.0e-6,0.0); 
   dec3phase(zero);
   dec3unblank();
   dec3power(dpwr3_D);
   dec3prgon(dseq3,pwd,dres3);
   dec3on();
   /* turn on 2H decoupling */

   initval(1.0,v3);
   decstepsize(decstep1);
   dcplrphase(v3);

   decpwrf(rfrb);

   delay(BigTC1 - POWER_DELAY - 4.0e-6 - pwd1
         - POWER_DELAY - PRG_START_DELAY - POWER_DELAY - WFG_START_DELAY);

   decshaped_pulse(rb180.name,pwcrb180,zero,0.0,0.0);
   dcplrphase(zero);
   decphase(t3);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:hmcmcgcbcaA.c

示例17: pulsesequence


//.........这里部分代码省略.........
           {
                shaped_satpulse("relaxD",satdly,zero);
                if (getflag("prgflg"))
                   shaped_purge(v6,zero,v18,v19);
           }
        else
           {
                satpulse(satdly,zero,rof1,rof1);
                if (getflag("prgflg"))
                   purge(v6,zero,v18,v19);
           }
     }
   else
        delay(d1);

   if (getflag("wet"))
     wet4(zero,one);

   obspower(tpwr);
   decpower(pwxlvl180);

  status(B);

    if (getflag("nullflg"))
    {
      rgpulse(0.5 * pw, zero, rof1, rof1);
      obspower(tpwr180);
      delay(tau);
      simshaped_pulse(pw180ad,pwx180ad,pw180,pwx180,zero,zero,rof1,rof1);
      delay(tau+POWER_DELAY+rof1);
      delay(tau+POWER_DELAY+rof1);
      simshaped_pulse(pw180ad,pwx180ad,pw180,pwx180,zero,zero,rof1,rof1);
      obspower(tpwr);
      delay(tau);
      rgpulse(0.5 * pw, zero, rof1, rof1);
      zgradpulse(hsglvl, hsgt);
      delay(1e-3);
    }

    rgpulse(pw, v6, rof1, rof1);
    obspower(tpwr180);
    shaped_pulse(pw180ad,pw180,zero,rof1,rof1);
    delay(tau+2.0*POWER_DELAY+2.0*rof1);
    simshaped_pulse(pw180ad,pwx180ad,pw180,pwx180,zero,zero,rof1,rof1);
    delay(tau);
    obspower(tpwr);
    rgpulse(pw, v1, rof1, rof1);
    zgradpulse(hsglvl, 2 * hsgt);
    decpower(pwxlvl);
    obspower(tpwr180);
    delay(1e-3);
    decrgpulse(pwx, v2, rof1, 2.0e-6);

    delay(d2 / 2);
    shaped_pulse(pw180ad,pw180,zero,rof1,rof1);
    delay(d2 / 2);

    delay(taug - POWER_DELAY);
    decpower(pwxlvl180r);
    decshaped_pulse(pwx180ref, pwx180r, zero, rof1, rof1);

    if(mult < 1.5)
      {
       obspower(tpwr);
       if (mult <0.5)
         delay(2*rof1);
       else
         rgpulse(mult*pw,zero,rof1,rof1);
      }
    else
      shaped_pulse(pw180ad,pw180,zero,rof1,rof1);

    if(mult < 1.5)
      delay(4*pwx/PI + 4.0e-6 + taug - gtE - gstab - 2 * GRADIENT_DELAY + WFG_START_DELAY + pw180 + WFG_STOP_DELAY - mult*pw);
    else
      delay(4*pwx/PI + 4.0e-6 + POWER_DELAY + taug  - gtE - gstab - 2 * GRADIENT_DELAY);

    zgradpulse(gzlvlE, gtE);
    delay(gstab);
    decshaped_pulse(pwx180ref, pwx180r, zero, rof1, rof1);
    decpower(pwxlvl);

    decrgpulse(pwx, v4, 2.0e-6, rof1);
    obspower(tpwr);
    decpower(pwxlvl180);
    zgradpulse(ZZgsign*0.6 * hsglvl, 1.2 * hsgt);
    delay(1e-3);

    rgpulse(pw, v3, rof1, rof1);
    obspower(tpwr180);
    shaped_pulse(pw180ad,pw180,zero,rof1,rof1);
    zgradpulse(gzlvl5,gtE/2.0);
    delay(tau-gtE/2.0+2.0*POWER_DELAY);
    simshaped_pulse(pw180ad,pwx180ad,pw180,pwx180,zero,zero,rof1,rof2);
    zgradpulse(gzlvl5+icosel * 2.0*gzlvlE/EDratio, gtE/2.0);
    delay(tau-gtE/2.0);
    decpower(dpwr);

  status(C);
}

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:101，代码来源:gc2hsqc.c

示例18: pulsesequence


//.........这里部分代码省略.........
        delay(gstab);
        zgradpulse(gzlvl6, gt0);
        delay(lambda - gt0 -gstab);
        sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
	dec2phase(t3);
	delay(lambda - gt0 -gstab);
        zgradpulse(gzlvl6, gt0);
        delay(gstab);
        dec2rgpulse( pwN, t3, 0.0, 0.0);

	/* purge */ 
        zgradpulse(gzlvl7, gt7);
	dec2phase(t3);
	delay(gstab);

   /* T1 relaxation delay */
         
        if(ncyc > 0) 
        {
          initval(ncyc,v4);
          loop(v4,v5);
          initval(2.0,v8); 
          loop(v8,v9);
          if(water_sat[A]=='n')         /* water to +Z */
	    {
 	     delay(tau_cp-pw -rof1 -pwHs - 2.0*rof1-2.0*POWER_DELAY-WFG_START_DELAY -WFG_STOP_DELAY );
             obspower(tpwrs); obspwrf(tpwrsf_d);
             shaped_pulse("H2osinc",pwHs,two,rof1,rof1);
             obspower(tpwr); obspwrf(4095.0);
	     rgpulse(2.0*pw, zero, rof1, rof1);
             obspower(tpwrs); obspwrf(tpwrsf_u);
 	     shaped_pulse("H2osinc",pwHs,two,rof1,rof1);
	     obspower(tpwr);
	     delay(tau_cp-pw -rof1 -pwHs - 2.0*rof1-2.0*POWER_DELAY-WFG_START_DELAY -WFG_STOP_DELAY );
	    }
   	   else /* just don't bother about water */
            {
             delay(tau_cp-pw -rof1);
	     rgpulse(2.0*pw, zero,  rof1, rof1);
	     delay(tau_cp-pw -rof1);
            }
          endloop(v9); /* repeat two times */
          endloop(v5);
        }
/* 15N evolution, t1 */
	txphase(zero);
	dec2phase(t1);
        dec2rgpulse( pwN, t1, 0.0, 0.0);
 	delay(tau1);
    	rgpulse(2.0*pw, zero, 0.0, 0.0);
        if(C13refoc[A]=='y')
         { 
          decpower(C180pwr);
 	  decshaped_pulse(Cshape, C180pw, zero, 0.0, 0.0);
          decpower(pwClvl);
         } 
    	delay(tau1);

       /* coding */ 
        delay(lambda  -gt1 -gstab -2.0*POWER_DELAY - C180pw); 
        if(C13refoc[A]!='y')  delay(2.0*POWER_DELAY + C180pw); 
        zgradpulse(-icosel*gzlvl1, gt1); delay(gstab);
    	dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
        rgpulse(2.0*pw, zero, 0.0, 0.0);
        zgradpulse(icosel*gzlvl1, gt1);  delay(gstab); 	/* 2.0*GRADIENT_DELAY */
        delay(lambda  -gt1 -gstab);
    	dec2phase(t10);

/*  reverse INEPT  */
        sim3pulse(pw, 0.0, pwN, zero, zero, t10, 0.0, 0.0);
	txphase(zero);
	dec2phase(zero);
        delay(gstab);
	zgradpulse(gzlvl4, gt5);
	delay(lambda  -gt5 -gstab);
	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
	txphase(one);
	dec2phase(one);
	delay(lambda - gt5 -gstab);
        zgradpulse(gzlvl4, gt5);
        delay(gstab);
	sim3pulse(pw, 0.0, pwN, one, zero, one, 0.0, 0.0);
	txphase(zero);
	dec2phase(zero);
        delay(gstab);
	zgradpulse( gzlvl5, gt5);
	delay(lambda - gt5 -gstab);
	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
	delay(lambda - gt5 -gstab);
        zgradpulse(gzlvl5, gt5);
        delay(gstab);
        rgpulse(pw, zero, 0.0, 0.0); 
	delay(gt2  +gstab - 0.65*pw + 2.0*GRADIENT_DELAY + 2.0*POWER_DELAY);
	rgpulse(2.0*pw, zero, rof1, rof1);
	dec2power(dpwr2); decpower(dpwr);				       /* POWER_DELAY */
        zgradpulse( gzlvl2, gt2);		/* 2.0*GRADIENT_DELAY */
        delay(gstab -10.0e-6);
statusdelay(C,10.0e-6);		
	setreceiver(t31);
}

开发者ID:OpenVnmrJ，项目名称:OpenVnmrJ，代码行数:101，代码来源:N15_T1.c

示例19: pulsesequence


//.........这里部分代码省略.........
    shaped_pulse("H2Osinc",pwHs,zero,5.0e-4,0.0);
    obspower(tpwrd); obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    txphase(one);
    delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
    xmtron();
    decphase(zero);
    dec2phase(zero);
    decpwrf(rf8);
    delay(timeTN - kappa - WFG3_START_DELAY);
   }
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero, 
								     0.0, 0.0);
	decphase(zero);
	decpwrf(rf6);
	delay(timeTN);

	dec2rgpulse(pwN, zero, 0.0, 0.0);
if (TROSY[A]=='n')
   {xmtroff();
    obsprgoff();
    rgpulse(pwHd,three,2.0e-6,0.0);}
	zgradpulse(-gzlvl3, gt3);
 	delay(2.0e-4);
	decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0);

	zgradpulse(-gzlvl7, gt7);
	decpwrf(rf0);
	decphase(zero);
	delay(tauC - gt7 - 0.5*10.933*pwC);

	decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
	decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
	decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0);      /* Shaka 6 composite */
	decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
	decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
	decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);

	zgradpulse(-gzlvl7, gt7);
	decpwrf(rf6);
	decphase(one);
	txphase(one);
        delay(tauC - gt7 - 0.5*10.933*pwC - WFG_START_DELAY);
							   /* WFG_START_DELAY */
	decshaped_pulse("offC6", pwC6, one, 0.0, 0.0);
	decoffset(dof);
	zgradpulse(-gzlvl9, gt9);
	decpwrf(rf1);
	decphase(t3);
	delay(2.0e-4);
      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghn_co_ca.c

示例20: pulsesequence


//.........这里部分代码省略.........
         obspower(tpwrs+6.0);
           obspwrf(tpwrsf_n);
   	   shaped_pulse("H2Osinc_n", pwHs, zero, 5.0e-5, 0.0);
	 obspower(tpwr); obspwrf(4095.0);

	zgradpulse(gzlvl3, gt3);
	dec2phase(t1);
	delay(gstab);
	decpwrf(rf8);   
   	dec2rgpulse(pwN, t1, 0.0, 0.0);
	txphase(zero);
	decphase(zero);


/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

	txphase(zero);
	dec2phase(zero);

/* shared CT for C' Cfilt

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ deepCopy函数代码示例发布时间：2022-05-30

C++ decrypt_data函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19254|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10006|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8650|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9676|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ decshaped_pulse函数代码示例

示例1: pulsesequence

示例2: dec_c13_shpulse

示例3: pulsesequence

示例4: pulsesequence

示例5: pulsesequence

示例6: pulsesequence

示例7: pulsesequence

示例8: pulsesequence

示例9: pulsesequence

示例10: pulsesequence

示例11: pulsesequence

示例12: pulsesequence

示例13: pulsesequence

示例14: pulsesequence

示例15: pulsesequence

示例16: pulsesequence

示例17: pulsesequence

示例18: pulsesequence

示例19: pulsesequence

示例20: pulsesequence

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

armancodv/building-energy-model-matlab:

鲁东大学一米网:Win7系统USB驱动器RAM的操

每的笔顺,概括每的笔画,理会每的部首

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053