C++ decrgpulse函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中decrgpulse函数的典型用法代码示例。如果您正苦于以下问题：C++ decrgpulse函数的具体用法？C++ decrgpulse怎么用？C++ decrgpulse使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了decrgpulse函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: pulsesequence

pulsesequence() {

// Define Variables and Objects and Get Parameter Values

   CP hx = getcp("HX",0.0,0.0,0,1); 
   strncpy(hx.fr,"dec",3);
   strncpy(hx.to,"obs",3);
   putCmd("frHX='dec'\n"); 
   putCmd("toHX='obs'\n");

   DSEQ dec = getdseq("H");
   strncpy(dec.t.ch,"dec",3);
   putCmd("chHtppm='dec'\n"); 
   strncpy(dec.s.ch,"dec",3);
   putCmd("chHspinal='dec'\n");

//--------------------------------------
// Copy Current Parameters to Processed
//-------------------------------------

   putCmd("groupcopy('current','processed','acquisition')");

// Dutycycle Protection

   DUTY d = init_dutycycle();
   d.dutyon = getval("pw1Hhytrap") + getval("pw2Hhytrap") + getval("tHX"); 
   d.dutyoff = d1 + 4.0e-6 + getval("t1HYtrap") + getval("t2HYtrap");
   d.c1 = d.c1 + (!strcmp(dec.seq,"tppm"));
   d.c1 = d.c1 + ((!strcmp(dec.seq,"tppm")) && (dec.t.a > 0.0));
   d.t1 = getval("rd") + getval("ad") + at;
   d.c2 = d.c2 + (!strcmp(dec.seq,"spinal"));
   d.c2 = d.c2 + ((!strcmp(dec.seq,"spinal")) && (dec.s.a > 0.0));
   d.t2 = getval("rd") + getval("ad") + at;
   d = update_dutycycle(d);
   abort_dutycycle(d,10.0);

// Set Phase Tables

   settable(ph1Hhytrap,4,table1);
   settable(phYhytrap,4,table2);
   settable(ph2Hhytrap,4,table3);
   settable(phXhx,4,table4);
   settable(phHhx,4,table5);
   settable(phRec,4,table6);
   setreceiver(phRec);

// Begin Sequence

   txphase(phXhx); decphase(ph1Hhytrap); dec2phase(phYhytrap);
   obspwrf(getval("aXhx")); decpwrf(getval("aHhytrap")); dec2pwrf(getval("aYhytrap"));
   obsunblank(); decunblank(); _unblank34();
   delay(d1);
   sp1on(); delay(2.0e-6); sp1off(); delay(2.0e-6);

// TRAPDOR on H with Y Modulation

   decrgpulse(getval("pw1Hhytrap"),ph1Hhytrap,0.0,0.0);
   decphase(ph2Hhytrap);
   decunblank();
   dec2on();
   delay(getval("t1HYtrap"));
   dec2off();
   decrgpulse(getval("pw2Hhytrap"),ph2Hhytrap,0.0,0.0);
   decphase(phHhx);
   decunblank();
   decphase(phHhx);
   decpwrf(getval("aHhx"));
   delay(getval("t2HYtrap"));

// H to X Cross Polarization

    _cp_(hx,phHhx,phXhx);

// Begin Acquisition

   _dseqon(dec);
   obsblank(); _blank34();
   delay(getval("rd"));
   startacq(getval("ad"));
   acquire(np, 1/sw);
   endacq();
   _dseqoff(dec);
   obsunblank(); decunblank(); _unblank34();
}

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:84，代码来源:trapdorycpx.c

示例2: pulsesequence


//.........这里部分代码省略.........
        /* shaped pulse */

        rgpulse(pw,zero,rof1,0.0);  /* 90 1H */


        zgradpulse(gzlvl0*0.9,gt0);
        delay(gstab);
	
	delay(tauhn - gt0 - gstab - 2.0*pwN); /* 1/(4JNH) */
        sim3pulse(2.0*pw,0.0,2.0*pwN,zero,zero,zero,rof1,rof1); /* 180 1H and 15N */
	delay(tauhn - gt0 - gstab - 2.0*pwN); /* 1/(4JNH) */
	

        zgradpulse(gzlvl0*0.9,gt0);
        delay(gstab);

        rgpulse(pw,one,rof1,0.0);  /* 90 1H */

        /* shaped pulse WATER-FLIP-back */
             obspower(tpwrs); obspwrf(tpwrsf_u);
             shaped_pulse("H2Osinc_u",pwHs,three,rof1,0.0);
             obspower(tpwr); obspwrf(4095.0);
        /* shaped pulse */
      }

/* End of filter section */

   
        zgradpulse(gzlvl3*0.9,gt3);
        delay(gstab);

	rgpulse(2.0*pw,zero,rof1,0.0);
        decpwrf(rf90onco);      /* Set decoupler power to rf90onco */
        decrgpulse(pw90onco,t4,0.0,0.0);   /* 90 for 13C */

/* record 13C' frequences and 13C'-15N coupling */

      delay(tau1);
      decpwrf(rf180offca);      /* Set decoupler power to rf180offca */
      simshaped_pulse("","offC3",2.0*pw,pw180offca,zero,zero,rof1,rof1); /* 180 for 1H and 13CA */
      decphase(zero);
      decpwrf(rf180onco);   
      delay(tau1);
      if (lambda>0.0)
      {
       delay(lambda*tau1);
       sim3pulse(0.0,pw180onco,2.0*pwN,zero,t5,zero,0.0,0.0);
       delay(lambda*tau1);
      } 
      else decrgpulse(pw180onco,t5,0.0,0.0);
   
      decpwrf(rf180offca); /* Set decoupler power to rf180offca */
      simshaped_pulse("","offC3",0.0,pw180offca,zero,zero,0.0,0.0); /* 180 CA */  
      decphase(zero);
      decpwrf(rf90onco); 
   
/* start reverse transfer from CO to N by INEPT */

       decrgpulse(pw90onco,zero,0.0,0.0); /* 90 for 13C' */
   
       zgradpulse(gzlvl3*0.7,gt3);
       delay(gstab);
     
       dec2rgpulse(pwN,t1,0.0,0.0);  	  /* 90 for 15N */
   
       delay((taunco - tauhn) - kappa*tau2);  /* 1/4J(NCO) - 1/4J(NH) - kt2/2 */

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghnco_Jnco_3DS3.c

示例3: pulsesequence


//.........这里部分代码省略.........
      if(p180 > 0.0)               
      {
         decoff();
         if (dm[1] == 'y') decon();
	 rgpulse(p180, zero, rof1, 0.0);
	 delay(d2);
      }
      rcvroff();  
      rgpulse(pw, t1,rof1, 0.0);
      decoff();
      if (dm[2] == 'y') decon();
   }
    
   else
   {

      settable(t1,4,table1);
      settable(t2,4,table2);
      settable(t3,4,table3);
      settable(t4,4,table4);

      status(A);
      setreceiver(t1);
      obs_pw_ovr(TRUE);
      dec_pw_ovr(TRUE);
      declvloff();
      decpwrf(crossp);
      obspwrf(tpwrm);
      txphase(t3);
      delay(d1);

      if(p180 > 0.0)             
      {
         decrgpulse(p180, zero, rof1, 0.0);
	 delay(d2);
      }

      rcvroff();
      decphase(t2);
      delay(rof1);
      decon();
      delay(pw - 0.8e-6);
      decphase(zero);
      delay(0.8e-6);
      xmtron();
      delay(cntct);
      xmtroff();

/*optional spin lock for 13C T1rho*/
    
      if (pcrho > 0.0)
      {
         decoff();
         if (dm[1] == 'y') decon();
         xmtron();
         delay(pcrho);
         xmtroff();          
      }
      decpwrf(dipolr);   
      decoff();
      if (dm[2] == 'y')
      {
         decon();
      }
   }

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:66，代码来源:xpolar1.c

示例4: pulsesequence

void pulsesequence()
{
  double   tpwr180r = getval("tpwr180r"),
           pw180r = getval("pw180r"),
	   pwx180 = getval("dnbippw"),
	   pwxlvl180 = getval("dnbippwr"),
           pp = getval("pp"),
           pplvl = getval("pplvl"),
	   tauC = getval("tauC"),
	   tau;
  int      prgcycle=(int)(getval("prgcycle")+0.5);
  char     pw180ref[MAXSTR],
	   dnbipshp[MAXSTR],
	   bipflg[MAXSTR];

  getstr("pw180ref", pw180ref);
  getstr("dnbipshp", dnbipshp);
  getstr("bipflg",bipflg);
  tau    = 1.0 / (2.0 * (getval("j1xh")));

  assign(ct,v17);
  assign(zero,v18);
  assign(zero,v19);

  if (getflag("prgflg") && getflag("satmode") && (prgcycle > 1.5))
    {
        hlv(ct,v17);
        mod2(ct,v18); dbl(v18,v18);
        if (prgcycle > 2.5)
           {
                hlv(v17,v17);
                hlv(ct,v19); mod2(v19,v19); dbl(v19,v19);
           }
     }

  settable(t1,4,phs1);
  settable(t2,8,phs2);
  settable(t3,4,phs3);
  getelem(t1,v17,v1);
  getelem(t2,v17,v2);
  getelem(t3,v17,v3);
  assign(v1,oph);
  add(oph,v18,oph);
  add(oph,v19,oph);

  if (getflag("prgflg") && getflag("satmode"))
        assign(v3,v2);

   /* equilibrium period */
   status(A);

   delay(5.0e-5);
   if (getflag("sspul"))
        steadystate();

   if (getflag("satmode"))
     {
        if ((d1-satdly) > 0.02)
                delay(d1-satdly);
        else
                delay(0.02);
        if (getflag("slpsat"))
           {
                shaped_satpulse("relaxD",satdly,v2);
                if (getflag("prgflg"))
                   shaped_purge(v1,v2,v18,v19);
           }
        else
           {
                satpulse(satdly,v2,rof1,rof1);
                if (getflag("prgflg"))
                   purge(v1,v2,v18,v19);
           }
     }
   else
	delay(d1);

   if (getflag("wet"))
     wet4(zero,one);

   status(B);

	obspower(tpwr);
	if (bipflg[1] == 'y')
	    decpower(pwxlvl180);
	else
	    decpower(pplvl);

        rgpulse(pw,v1,rof1,rof1);
	if (bipflg[1] == 'y')
	    { 
		decshaped_pulse(dnbipshp,pwx180,zero,2.0e-6,2.0e-6);
		delay(tau+tauC);
	    }
	else
	    {
	    	decrgpulse(2*pp,zero,2.0e-6,2.0e-6);
		delay(tau);
	    }
	obspower(tpwr180r);
//.........这里部分代码省略.........

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:101，代码来源:CRAPT.c

示例5: pulsesequence


//.........这里部分代码省略.........
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t11,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t5,2,4); tsadd(t11,2,4); }



/*   BEGIN PULSE SEQUENCE   */

status(A);
        if ( dm3[B] == 'y' )
          lk_sample();  
        if ((ni/sw1-d2)>0) 
         delay(ni/sw1-d2);       /*decreases as t1 increases for const.heating*/
        if ((ni2/sw2-d3)>0) 
         delay(ni2/sw2-d3);      /*decreases as t2 increases for const.heating*/
   	delay(d1);
        if ( dm3[B] == 'y' )
          { lk_hold(); lk_sampling_off();}  /*freezes z0 correction, stops lock pulsing*/

	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(t3);
	delay(1.0e-5);

	decrgpulse(pwC, zero, 0.0, 0.0);	   /*destroy C13 magnetization*/
	zgradpulse(gzlvl1, 0.5e-3);
	delay(1.0e-4);
	decrgpulse(pwC, one, 0.0, 0.0);
	zgradpulse(0.7*gzlvl1, 0.5e-3);
	delay(5.0e-4);

      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        }
	rgpulse(pw, t3, 0.0, 0.0);                    /* 1H pulse excitation */

        decphase(zero);
	delay(0.5*del + tau1 - 2.0*pwC);

        decrgpulse(2.0*pwC, zero, 0.0, 0.0);

        txphase(zero);
	delay(tau1);

	rgpulse(2.0*pw, zero, 0.0, 0.0);

                if (mag_flg[A] == 'y')
                {
                   magradpulse(icosel1*gzcal*gzlvl1,0.1*gt1);
                }
                else
                {

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghcch_tocsyA.c

示例6: pulsesequence


//.........这里部分代码省略.........

   rgpulse(pw,one,0.0,0.0);
   rgpulse(2.0*pw,zero,0.0,0.0);
   rgpulse(pw,one,0.0,0.0);

   delay( zeta - 1.34e-3 - 2.0*pw + pwS4 );

   dec2rgpulse(2*pwN,zero,0.0,0.0);
   c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);
   dec2phase(one);

   delay(zeta - 2.0e-6);

   dec2rgpulse(pwN,one,2.0e-6,0.0);

  }

   dec2phase(zero); decphase(zero);

   delay(0.2e-6);
   zgradpulse(gzlvl3, gt3);
   delay(gstab);

/* xxxxxxxxxxxxxxxxxxxxx 13CO to 13CA TRANSFER xxxxxxxxxxxxxxxxxxxxxxx  */

   c13pulse("co", "ca", "sinc", 90.0, zero, 2.0e-6, 0.0);

                delay(2.0e-7);
                zgradpulse(gzlvl10, gt10);
                delay(100.0e-6);

  delay(tauc - POWER_DELAY - gt10 - 100.2e-6 - (0.5*10.933*pwC));

        decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
        decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
        decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0);      /* Shaka 6 composite */
        decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
        decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
        decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);

                delay(2.0e-7);
                zgradpulse(gzlvl10, gt10);
                delay(100.0e-6);

      delay(tauc - POWER_DELAY - 4.0e-6 - gt10 - 100.2e-6 - (0.5*10.933*pwC));

   c13pulse("co", "ca", "sinc", 90.0, one, 4.0e-6, 0.0);

   set_c13offset("ca");   /* change Dec1 carrier to Ca (55 ppm) */
   delay(0.2e-6);
   zgradpulse(gzlvl9, gt9);
   delay(gstab);

/* xxxxxxxxxxxxxxxxxx 13CA EVOLUTION xxxxxxxxxxxxxxxxxxxxxx */
                /* Turn on D decoupling using the third decoupler */
                dec3unblank(); dec3rgpulse(1/dmf3, one, 0.0, 0.0);
                dec3unblank(); setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
                /* Turn on D decoupling */

   c13pulse("ca", "co", "square", 90.0, t5, 2.0e-6, 0.0);

if (fCTCa[A]=='y')  
{
/* Constant t2 */
   decpower(cbpwr);
   decphase(zero);

开发者ID:OpenVnmrJ，项目名称:OpenVnmrJ，代码行数:67，代码来源:PR42_ghn_co_caP_TROSY.c

示例7: dipsi3b

void dipsi3b()
{
   decrgpulse(2.722*p1,three,0.0,0.0);      /*245 deg pulse */
   decrgpulse(4.389*p1,one,0.0,0.0);      /*395 deg pulse */
   decrgpulse(2.778*p1,three,0.0,0.0);      /*250 deg pulse */
   decrgpulse(3.056*p1,one,0.0,0.0);      /*275 deg pulse */
   decrgpulse(0.333*p1,three,0.0,0.0);      /* 30 deg pulse */
   decrgpulse(2.556*p1,one,0.0,0.0);      /*230 deg pulse */
   decrgpulse(4.000*p1,three,0.0,0.0);      /*360 deg pulse */
   decrgpulse(2.722*p1,one,0.0,0.0);      /*245 deg pulse */
   decrgpulse(4.111*p1,three,0.0,0.0);      /*370 deg pulse */
   decrgpulse(3.778*p1,one,0.0,0.0);      /*340 deg pulse */
   decrgpulse(3.889*p1,three,0.0,0.0);      /*350 deg pulse */
   decrgpulse(2.889*p1,one,0.0,0.0);      /*260 deg pulse */
   decrgpulse(3.000*p1,three,0.0,0.0);      /*270 deg pulse */
   decrgpulse(0.333*p1,one,0.0,0.0);      /* 30 deg pulse */
   decrgpulse(2.500*p1,three,0.0,0.0);      /*225 deg pulse */
   decrgpulse(4.056*p1,one,0.0,0.0);      /*365 deg pulse */
   decrgpulse(2.833*p1,three,0.0,0.0);      /*255 deg pulse */
   decrgpulse(4.389*p1,one,0.0,0.0);      /*395 deg pulse */
}

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:21，代码来源:hcchtocsy.c

示例8: pulsesequence


//.........这里部分代码省略.........
    if((f2180[A] == 'y') && (ni2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;


/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }



/* BEGIN PULSE SEQUENCE */

status(A);
   	delay(d1);
	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(zero);
   	delay(1.0e-5);

	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, one, 0.0, 0.0);
    txphase(zero);
    
    if (tpwrsf<4095.0) {obspower(tpwrs+6.0); obspwrf(tpwrsf);}
     else obspower(tpwrs);
    shaped_pulse("H2Osinc", pwHs, zero, 5.0e-4, 0.0);
    obspower(tpwrd); obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    txphase(one);
    delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghn_coco.c

示例9: pulsesequence


//.........这里部分代码省略.........
                 }
                else zgradpulse(-1.0*gzlvl1,gt1);
		delay((tau - 1.0e-6 - (2*pw/PI)-del-2.333*gt1)/2.0); 
	} 
	else 
	{ 
		delay((tau - 1.0e-6 - (2*pw/PI)-del-gt1-gstab)/2.0); 
                if (alt_grd[0] == 'y')
                 {  ifzero(v10);
                     zgradpulse(gzlvl1,gt1);
                  elsenz(v10);
                     zgradpulse(-1.0*gzlvl1,gt1);
                  endif(v10);
                 }
                else zgradpulse(gzlvl1,gt1);
                if (satmode[1] == 'y')
                  {  obspower(satpwr);
                     rgpulse(del-gt1-2.0*rof1,zero,rof1,rof1);
                     obspower(tpwr);
                  }
		else delay(del-gt1); 
                if (alt_grd[0] == 'y')
                 {  ifzero(v10);
                     zgradpulse(gzlvl1,gt1);
                  elsenz(v10);
                     zgradpulse(-1.0*gzlvl1,gt1);
                  endif(v10);
                 }
                else zgradpulse(gzlvl1,gt1);
		delay(gstab); 
		delay((tau - 1.0e-6 - (2*pw/PI)-del-gt1-gstab)/2.0); 
	} 
 
     decrgpulse(pwx,v1,1.0e-6,1.0e-6); 
     delay(gtE+gtau); 
     decrgpulse(2*pwx,v4,1.0e-6,1.0e-6); 
     delay(gstab); 
     if (alt_grd[0] == 'y')
         {  ifzero(v10);
               zgradpulse(gzlvlE,gtE);
            elsenz(v10);
               zgradpulse(-1.0*gzlvlE,gtE);
            endif(v10);
         }
     else zgradpulse(gzlvlE,gtE);
     delay(gstab); 
 
     if (d2/2 > pw) 
        delay(d2/2 - pw); 
     else 
        delay(d2/2); 
     rgpulse(2.0*pw,zero,1.0e-6,1.0e-6); 
     if (d2/2 > pw)  
        delay(d2/2 - pw); 
     else  
        delay(d2/2); 
 
     delay(gstab); 
     if (alt_grd[0] == 'y')
         {  ifzero(v10);
               zgradpulse(gzlvlE,gtE);
            elsenz(v10);
               zgradpulse(-1.0*gzlvlE,gtE);
            endif(v10);
         }
     else zgradpulse(gzlvlE,gtE);

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:Dghmqcidosy.c

示例10: pulsesequence

void pulsesequence() {

//
// Set the Maximum Dynamic Table Number
//

   settablenumber(10);
   setvvarnumber(30);

//Define Variables and Objects and Get Parameter Values

   CP hx = getcp("HX",0.0,0.0,0,1);
   strncpy(hx.fr,"dec",3);
   strncpy(hx.to,"obs",3);
   putCmd("frHX='dec'\n");
   putCmd("toHX='obs'\n");

   WMPA cpmg = getcpmg("cpmgX");
   strncpy(cpmg.ch,"obs",3);
   putCmd("chXcpmg='obs'\n");

   double aXecho = getval("aXecho");  // define the echoX group in the sequence
   double t1Xechoinit = getval("t1Xecho");
   double pwXecho = getval("pwXecho");
   double t2Xechoinit = getval("t2Xecho");
   double t1Xecho  = t1Xechoinit - pwXecho/2.0 - getval("pwX90")/2.0;
   if (t1Xecho < 0.0) t1Xecho = 0.0;
   double t2Xecho  = t2Xechoinit - pwXecho/2.0 - cpmg.r1 - cpmg.t2 - getval("ad");
   if (t2Xecho < 0.0) t2Xecho = 0.0;

   DSEQ dec = getdseq("H");
   strncpy(dec.t.ch,"dec",3);
   putCmd("chHtppm='dec'\n"); 
   strncpy(dec.s.ch,"dec",3);
   putCmd("chHspinal='dec'\n");

//--------------------------------------
// Copy Current Parameters to Processed
//-------------------------------------

   putCmd("groupcopy('current','processed','acquisition')");

// Dutycycle Protection

   DUTY d = init_dutycycle();
   d.dutyon = getval("pwH90") + getval("tHX") + pwXecho + (cpmg.cycles - 1)*cpmg.pw; 
   d.dutyoff = d1 + 4.0e-6;
   d.c1 = d.c1 + (!strcmp(dec.seq,"tppm"));
   d.c1 = d.c1 + ((!strcmp(dec.seq,"tppm")) && (dec.t.a > 0.0));
   d.t1 = t1Xecho + t2Xecho + getval("rd") + getval("ad") + 
          at - (cpmg.cycles - 1)*cpmg.pw;
   d.c2 = d.c2 + (!strcmp(dec.seq,"spinal"));
   d.c2 = d.c2 + ((!strcmp(dec.seq,"spinal")) && (dec.s.a > 0.0));
   d.t2 = t1Xecho + t2Xecho + getval("rd") + getval("ad") + 
          at - (cpmg.cycles - 1)*cpmg.pw;
   d = update_dutycycle(d);
   abort_dutycycle(d,10.0);


// Set Phase Tables

   settable(phH90,64,table1);
   settable(phXhx,64,table2);
   settable(phHhx,64,table3);
   settable(phXecho,64,table4);
   settable(phXcpmg,64,table5);
   settable(phRec,64,table6);
   setreceiver(phRec);

// Begin Sequence

   txphase(phXhx); decphase(phH90);
   obspwrf(getval("aXhx")); decpwrf(getval("aH90"));
   obsunblank(); decunblank(); _unblank34();
   delay(d1);
   sp1on(); delay(2.0e-6); sp1off(); delay(2.0e-6);

// H to X Cross Polarization

   decrgpulse(getval("pwH90"),phH90,0.0,0.0);
   decphase(phHhx);
   _cp_(hx,phHhx,phXhx);

// H Decoupling On

   decphase(zero);
   _dseqon(dec);

// X Hahn Echo

   txphase(phXecho);
   obspwrf(aXecho);
   delay(t1Xecho);
   rgpulse(pwXecho,phXecho,0.0,0.0);
   delay(t2Xecho);

// Apply CPMG Cycles

   obsblank(); _blank34();
   delay(cpmg.r1);
//.........这里部分代码省略.........

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:101，代码来源:cpcpmg1d.c

示例11: pulsesequence


//.........这里部分代码省略.........
  if (t2_counter % 2)
  {
    tsadd(t5, 2, 4);
    tsadd(t11, 2, 4);
  }



  /*   BEGIN PULSE SEQUENCE   */

  status(A);
  if (dm3[B] == 'y')
    lk_sample();
  if ((ni / sw1 - d2) > 0)
    delay(ni / sw1 - d2);	/*decreases as t1 increases for const.heating */
  if ((ni2 / sw2 - d3) > 0)
    delay(ni2 / sw2 - d3);	/*decreases as t2 increases for const.heating */
  delay(d1);
  if (dm3[B] == 'y')
  {
    lk_hold();
    lk_sampling_off();
  }				/*freezes z0 correction, stops lock pulsing */
  rcvroff();

  obspower(tpwr);
  decpower(pwClvl);
  dec2power(pwNlvl);
  decpwrf(rf0);
  obsoffset(tof);
  txphase(t3);
  delay(1.0e-5);

  decrgpulse(pwC, zero, 0.0, 0.0);	/*destroy C13 magnetization */
  zgradpulse(gzlvl0, 0.5e-3);
  delay(1.0e-4);
  decrgpulse(pwC, one, 0.0, 0.0);
  zgradpulse(0.7 * gzlvl0, 0.5e-3);
  delay(5.0e-4);

  if (dm3[B] == 'y')		/* begins optional 2H decoupling */
  {
    dec3rgpulse(1 / dmf3, one, 10.0e-6, 2.0e-6);
    dec3unblank();
    dec3phase(zero);
    delay(2.0e-6);
    setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
  }

  rgpulse(pw, t3, 0.0, 0.0);	/* 1H pulse excitation */
  zgradpulse(gzlvl0, gt0);	/* 2.0*GRADIENT_DELAY */
  decphase(zero);
  delay(taua + tau1 - gt0 - 2.0 * GRADIENT_DELAY - 2.0 * pwC);
  decrgpulse(2.0 * pwC, zero, 0.0, 0.0);
  txphase(zero);
  delay(tau1);
  rgpulse(2.0 * pw, zero, 0.0, 0.0);
  zgradpulse(gzlvl0, gt0);
  txphase(one);
  decphase(t5);
  delay(taua - gt0);
  rgpulse(pw, one, 0.0, 0.0);
  zgradpulse(gzlvl3, gt3);
  delay(2.0e-4);
  decrgpulse(pwC, t5, 0.0, 0.0);
  delay(tau2);

开发者ID:timburrow，项目名称:ovj3，代码行数:67，代码来源:hcch_tocsy_new.c

示例12: pulsesequence


//.........这里部分代码省略.........
  if(t1_counter % 2) 
   {
	tsadd(t1,2,4);
	tsadd(t4,2,4);
	tsadd(t5,2,4);
	tsadd(t11,2,4);
   }

/* Calculate modifications to phases for States-TPPI acquisition          */
  if( ix == 1) d3_init = d3;

	t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );

/* BEGIN PULSE SEQUENCE */

status(A);
        dofa = dof - 35.0*dfrq; /*start at C2' */
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	obsoffset(tof);
	decoffset(dofa);
	dec2offset(dof2);
	txphase(zero);
	decphase(zero);
        dec2phase(zero);

	delay(d1);
        rcvroff();

status(B);

	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(gstab/2);
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, one, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(calH*pw,zero,0.0,0.0);                 /* 1H pulse excitation */
   	decphase(t4);
        delay(2.0*lambda);
        decrgpulse(calC*pwC, t4, 0.0, 0.0);
	zgradpulse(gzlvl3, gt3);
	obspower(pwH_Sel_lvl);
   	decphase(zero);
        delay(taucc -lambda - gt3 - WFG2_START_DELAY - pwH_Sel_pw/2.0 + 70.0e-6);

        shaped_pulse(pwH_Sel_Shape, pwH_Sel_pw, zero, 0.0, 0.0);
        delay(lambda - pwH_Sel_pw/2.5);

        decrgpulse(2.0*pwC, t1, 0.0, 0.0);

        zgradpulse(gzlvl3, gt3);
	obspower(tpwr);
   	decphase(t5);
   	txphase(t2);
        delay(taucc - gt3);

        simpulse(pw, pwC, t2, t5, 0.0, 0.0);

        zgradpulse(gzlvl4, gt4);       	/* 2.0*GRADIENT_DELAY */
        txphase(zero);
	decphase(t3);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:rna_cchcosy_CCdec.c

示例13: pulsesequence


//.........这里部分代码省略.........
   rlpower(dhpwr,DODEV);         /* Set Dec1 power for 13C pulses          */
   rlpower(dhpwr2,DO2DEV);       /* Set Dec2 power for 15N pulses       */
   obsoffset(tof);
/* Presaturation Period */
status(B);
   if (fsat[0] == 'y')
   {
          delay(2.0e-5);
          rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
          rlpower(tpwr,TODEV);    /* Set transmitter power for hard 1H pulses */
          delay(2.0e-5);
          if(fscuba[0] == 'y')
          {
                  delay(2.2e-2);
                  rgpulse(pw,zero,2.0e-6,0.0);
                  rgpulse(2*pw,one,2.0e-6,0.0);
                  rgpulse(pw,zero,2.0e-6,0.0);
                  delay(2.2e-2);
          }
   }
   else
   {
     delay(d1);
   }
   rlpower(tpwr,TODEV);               /* Set transmitter power for 1H CPMG pulses */
   txphase(zero);
   dec2phase(zero);
   decphase(zero);
   delay(1.0e-5);
/* Begin Pulses */
status(C);
   rcvroff();
   delay(20.0e-6);
   decrgpulse(pwc,zero,4.0e-6,0.0);
delay(2.0e-6);
rgradient('z',gzlvl1);
delay(gt1);
rgradient('z',0.0);
delay(250.0e-6);
rgpulse(pw,zero,0.0,0.0);
decpower(d_reb);
delay(2.0e-6);
rgradient('z',gzlvl2);
delay(gt2);
rgradient('z',0.0);
delay(150.0e-6);
if(filter_flg[A] == 'y')
   delay(taua - POWER_DELAY - gt2 - 152e-6
     - WFG2_START_DELAY - 0.5*pwc_reb - 4.0/PI*pw);
else
   delay(taua - POWER_DELAY - gt2 - 152e-6
     - WFG2_START_DELAY - 0.5*pwc_reb);
simshaped_pulse("hard",sh_reb,2.0*pw,pwc_reb,zero,zero,0.0,0.0);
txphase(one);
decpower(dhpwr);
decphase(t4);
delay(taua - 0.5*pwc_reb - WFG2_STOP_DELAY - POWER_DELAY - gt2 - 152e-6 );
delay(2.0e-6);
rgradient('z',gzlvl2);
delay(gt2);
rgradient('z',0.0);
delay(150.0e-6);
if(filter_flg[A] == 'n')
  rgpulse(pw,one,0.0,0.0);
if(filter_flg[A] == 'y') {
decrgpulse(pwc,t4,0.,0.);

开发者ID:NMRWIKI，项目名称:psdb，代码行数:67，代码来源:Ha_SQ_exchange_lek_600_GLY.c

示例14: pulsesequence

pulsesequence()

{
   double   gzlvlE = getval("gzlvlE"),
	    gtE = getval("gtE"),
	    EDratio = getval("EDratio"),
	    gstab = getval("gstab"),
	    mult = getval("mult"),
            hsglvl = getval("hsglvl"),
            hsgt = getval("hsgt"),
            tau,
            evolcorr,
            taug;
   int	    icosel,
	    phase1 = (int)(getval("phase")+0.5),
	    ZZgsign;

//synchronize gradients to srate for probetype='nano'
//   Preserve gradient "area"
        gtE = syncGradTime("gtE","gzlvlE",0.5);
        gzlvlE = syncGradLvl("gtE","gzlvlE",0.5);

   tau  = 1/(4*(getval("j1xh")));
   evolcorr = 2*pw+4.0e-6;

   if (mult > 0.5)
    taug = 2*tau;
   else
    taug = gtE + gstab + 2*GRADIENT_DELAY;
   ZZgsign=-1;
   if (mult == 2) ZZgsign=1;
   icosel = 1;

   settable(t1,4,ph1);
   settable(t2,2,ph2);
   settable(t3,8,ph3);
   settable(t4,16,ph4);
   settable(t5,16,ph5);

   getelem(t2,ct,v2);
   getelem(t5,ct,oph);
/*
   mod2(id2,v14);
   dbl(v14,v14);
*/
  initval(2.0*(double)(((int)(d2*getval("sw1")+0.5)%2)),v14);

   if ((phase1 == 2) || (phase1 == 5))
     icosel = -1;

   add(v2,v14,v2);
   add(oph,v14,oph);

status(A);
   obspower(tpwr);

   delay(5.0e-5);
   if (getflag("sspul"))
        steadystate();

   if (satmode[0] == 'y')
     {
        if ((d1-satdly) > 0.02)
                delay(d1-satdly);
        else
                delay(0.02);
        satpulse(satdly,zero,rof1,rof1);
     }
   else
	delay(d1);

   if (getflag("wet"))
     wet4(zero,one);

   decpower(pwxlvl);

status(B);

      if (getflag("nullflg"))
      {
        rgpulse(0.5*pw,zero,rof1,rof1);
        delay(2*tau);
        simpulse(2.0*pw,2.0*pwx,zero,zero,rof1,rof1);
        delay(2*tau);
        rgpulse(1.5*pw,two,rof1,rof1);
        zgradpulse(hsglvl,hsgt);
        delay(1e-3);
      }

     rgpulse(pw,zero,rof1,rof1);
     delay(tau);
     simpulse(2*pw,2*pwx,zero,zero,rof1,rof1);
     delay(tau);
     rgpulse(pw,t1,rof1,rof1);
	zgradpulse(hsglvl,2*hsgt);
	delay(1e-3);
     decrgpulse(pwx,v2,rof1,2.0e-6);
     
      delay(d2/2);
     rgpulse(2*pw,zero,2.0e-6,2.0e-6);
//.........这里部分代码省略.........

开发者ID:timburrow，项目名称:ovj3，代码行数:101，代码来源:gHSQC.c

示例15: pulsesequence


//.........这里部分代码省略.........
   if ( phase2 == 1 )    { tsadd(t5,2,4);   icosel = 1; }
   else                    icosel = -1; 

   tau1 = 1.0 * t1_counter * cos_H / swTilt;
   tau2 = 1.0 * t1_counter * cos_C / swTilt;
   tau3 = 1.0 * t1_counter * cos_N / swTilt;

   tau1 = tau1/2.0;  tau2 = tau2/2.0;  tau3 =tau3/2.0;


   if (ix ==1 )
   {
      printf ("Current Spectral Width:\t\t%5.2f\n", swTilt);
      printf ("Angle_H: %5.2f \n", angle_H);
      printf ("Angle_C: %5.2f \n", angle_C);
      printf ("Angle_N: %5.2f \n", angle_N);
      printf ("\n\n\n\n\n");
   }


/* BEGIN ACTUAL PULSE SEQUENCE */

status(A);

      delay(d1);

      rcvroff();
      obsoffset(tofali);  obspower(tpwr);     obspwrf(4095.0);
      decoffset(dof);     decpower(pwClvl);   decpwrf(rf0);
      dec2offset(dof2);   dec2power(pwNlvl);  dec2pwrf(4095.0);

      if (gt0 > 0.2e-6)
      {
         decrgpulse(pwC,zero,10.0e-6,0.0);
         dec2rgpulse(pwN,zero,2.0e-6,2.0e-6);
         zgradpulse(gzlvl0,gt0); 
         delay(gstab);
      }

      txphase(t1);   decphase(t2);   dec2phase(zero);

status(B);

   rgpulse(pw,t1,4.0e-6,2.0e-6);                     

      zgradpulse(gzlvl3,gt3);
      delay(2.0*tauCH - gt3 - 2.0*GRADIENT_DELAY -4.0e-6);

   decrgpulse(pwC,t2,2.0e-6,2.0e-6);	                        
      decphase(zero);   

   /*=======  Start of c13 evolution ==========*/

      if ( ((tau2 -PRG_START_DELAY - POWER_DELAY -pwN - 2.0*pwC/PI -2.0e-6)> 0) 
           && ((tau2 -PRG_STOP_DELAY - POWER_DELAY - pwN - 2.0*pwC/PI -2.0e-6)>0)
           && (codec[A] == 'y') )
      {
         decpower(copwr);  decpwrf(copwrf);
         decprgon(codecseq,1/codmf,cores);
         decon();

         delay(tau2 -PRG_START_DELAY - POWER_DELAY -pwN - 2.0*pwC/PI -2.0e-6);
   sim3pulse(2.0*pw, 0.0, 2.0*pwN, t1, zero, zero, 0.0, 0.0);
         delay(tau2 -PRG_STOP_DELAY - POWER_DELAY - pwN - 2.0*pwC/PI -2.0e-6);

         decoff();

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:PR42_gChmqcnoesyNhsqcA.c

示例16: pulsesequence


//.........这里部分代码省略.........
   else
   {
    delay(d1);
   }
   obspower(tpwr);           /* Set transmitter power for hard 1H pulses */
   obsoffset(tof);
   txphase(t1);
   decphase(zero);
   dec2phase(zero);
   delay(1.0e-5);

/* Begin Pulses */

status(C);

   decoffset(dof_me);

   lk_hold();

   rcvroff();
   delay(20.0e-6);

/* ensure that magnetization originates on 1H and not 13C */

   if(dtt_flg[A] == 'y') {
     obsoffset(tof_dtt);
     obspower(tpwrs1);
     shaped_pulse("H2Osinc",pwHs1,zero,10.0e-6,0.0);
     obspower(tpwr);

     obsoffset(tof); 
   }
 
   decrgpulse(pwC,zero,0.0,0.0);
 
   zgradpulse(gzlvl0,gt0);
   delay(gstab);

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   zgradpulse(gzlvl1,gt1);
   delay(gstab);

   delay(taua - gt1 -gstab); 

   simpulse(2.0*pw,2.0*pwC,zero,zero,0.0,0.0);
   txphase(one);

   delay(taua - gt1 - gstab); 
   	
   zgradpulse(gzlvl1,gt1);
   delay(gstab);


   rgpulse(pw,one,0.0,0.0);

   /* shaped_pulse */
   obspower(tpwrs);
   shaped_pulse("H2Osinc",pwHs,zero,2.0e-6,0.0);
   obspower(tpwr);
   /* shaped_pulse */

   decoffset(dof);  /* jump 13C to 40 ppm */

   zgradpulse(gzlvl2,gt2);
   delay(gstab);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:hmcmcgcbcaA.c

示例17: pulsesequence


//.........这里部分代码省略.........
    tau2 = tau2/2.0;
    if(tau1 < 0.2e-6) tau1 = 0.0; 
    if(tau2 < 0.2e-6) tau2 = 0.0; 

    if(t2b < 0.0) t2b = 0.0;
    t2a = CTdelay - tau2 + t2b;
    if(t2a < 0.2e-6)  t2a = 0.0;

/* uncomment these lines to check t2a and t2b 
    printf("%d: t2a = %.12f", t2_counter,t2a);
    printf(" ; t2b = %.12f\n", t2b);
*/


/* BEGIN PULSE SEQUENCE */

status(A);
   	delay(d1);
        if ( dm3[B] == 'y' )
          { lk_hold(); lk_sampling_off();}  /*freezes z0 correction, stops lock pulsing*/
 
	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	decoffset(dofCO);
	txphase(zero);
   	delay(1.0e-5);

       if (TROSY[A] == 'n')
	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(-gzlvl0, 0.5e-3);
	delay(1.0e-4);
       if (TROSY[A] == 'n')
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(-0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

  	rgpulse(pw, zero, 0.0, 0.0);                   /* 1H pulse excitation */

   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, one, 0.0, 0.0);
    if (tpwrsf < 4095.0) 
     {obspwrf(tpwrsf);
        obspower(tpwrs+6.0);}                 /* increases tpwrs by 6dB, now need */
     else
        obspower(tpwrs);
                                          /* tpwrsf to be ~ 2048 for equivalence */

if (TROSY[A]=='y')
   {txphase(two);
    shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
    obspower(tpwr); obspwrf(4095.0);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghn_co_ca.c

示例18: pulsesequence


//.........这里部分代码省略.........

/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t11,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t5,2,4); tsadd(t11,2,4); }



/*   BEGIN PULSE SEQUENCE   */

status(A);
 if (dm3[B]=='y') lk_sample();
   	delay(d1);
 if (dm3[B]=='y') lk_hold();

	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rfC);
	obsoffset(tof);
        decoffset(dofa);
        dec2offset(dof2);
	txphase(t3);
	delay(1.0e-5);

	decrgpulse(pwC, zero, 0.0, 0.0);	   /*destroy C13 magnetization*/
	zgradpulse(gzlvl1, 0.5e-3);
	delay(grecov/2);
	decrgpulse(pwC, one, 0.0, 0.0);
	zgradpulse(0.7*gzlvl1, 0.5e-3);
	delay(5.0e-4);

   if(dm3[B] == 'y')				  /*optional 2H decoupling on */
        { 
          dec3unblank();
          dec3rgpulse(1/dmf3, one, 0.0, 0.0); 
          dec3unblank();
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
         } 
	rgpulse(pw, t3, 0.0, 0.0);                    /* 1H pulse excitation */

        decphase(zero);
	delay(0.5*del + tau1 - 2.0*pwC);

        decrgpulse(2.0*pwC, zero, 0.0, 0.0);

        txphase(zero);
	delay(tau1);

	rgpulse(2.0*pw, zero, 0.0, 0.0);

	zgradpulse(icosel1*gzlvl1, 0.1*gt1);
        decphase(t5);
	delay(0.5*del - 0.1*gt1);

	simpulse(pw, pwC, zero, t5, 0.0, 0.0);

	zgradpulse(gzlvl3, gt3);

开发者ID:timburrow，项目名称:ovj3，代码行数:67，代码来源:rna_ghcch_tocsy.c

示例19: pulsesequence


//.........这里部分代码省略.........
     dec2stepsize(45.0); 
     dcplr2phase(v3);

     delay(0.2e-6);
     zgradpulse(gzlvl3,gt3);
     delay(200.0e-6);

     dec2rgpulse(pwN,zero,0.0,0.0);
     dcplr2phase(zero);

     delay(1.34e-3 - SAPS_DELAY - 2.0*pw);

     rgpulse(pw,one,0.0,0.0);
     rgpulse(2.0*pw,zero,0.0,0.0);
     rgpulse(pw,one,0.0,0.0);

     delay( zeta - 1.34e-3 - 2.0*pw);
  
     dec2rgpulse(2.0*pwN,zero,0.0,0.0);
     decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);

     delay(zeta -WFG_START_DELAY -pwchirp -WFG_STOP_DELAY -2.0e-6);

     dec2rgpulse(pwN,zero,2.0e-6,0.0);
    }

   dec2phase(zero); decphase(t1);
   decpower(d_c90);

   delay(0.2e-6);
   zgradpulse(gzlvl8,gt8);
   delay(200.0e-6);

   decrgpulse(pwc90,t1,2.0e-6,0.0);
/* t1 period for Co evolution begins */
   if (fco180[A]=='n')  
     {
      decpower(d_c180);

      delay(tau1);
      sim3shaped_pulse("",spca180,"",0.0,pwc180off,2.0*pwN,zero,zero,zero,4.0e-6,0.0);

      decpower(d_c90);

       delay(tau1);
     }
   else /* for checking sequence */
     {
      decpower(d_c180);
      decrgpulse(pwc180on,zero,4.0e-6,0.0);
      decpower(d_c90);
     }
/* t1 period for Co evolution ends */
   decrgpulse(pwc90,zero,4.0e-6,0.0);

   decoffset(dof-(174-56)*dfrq);   /* change Dec1 carrier to Ca (55 ppm) */
   delay(0.2e-6);
   zgradpulse(gzlvl4,gt4);
   delay(150.0e-6);

   /* Turn on D decoupling using the third decoupler */
   dec3phase(one);
   dec3power(pwDlvl);
   dec3rgpulse(pwD,one,4.0e-6,0.0);
   dec3phase(zero);
   dec3power(dpwr3);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghncoca_sim_trosy_4DA.c

示例20: pulsesequence


//.........这里部分代码省略.........

   /* Second purge CHIRP off */

   delay(2.0e-6);
   zgradpulse(gzlvl11,gt11);
   delay(gstab);

   txphase(zero);

   delay(taua2 + 2*pw - (pwchirp2 - d_me2) 
         - PRG_STOP_DELAY - gt11 - gstab -2.0e-6 );

   rgpulse(pw,zero,0.0,0.0);  

   delay(2.0e-6);
   zgradpulse(gzlvl10,gt10);
   delay(2.0*gstab); 

   rgpulse(pw,t1,4.0e-6,0.0);

   delay(tau1);

   rgpulse(pw,zero,2.0e-6,0.0);

   delay(mix - 10.0e-3);

   delay(2.0e-6);
   zgradpulse(gzlvl0,gt0);

   decpower(pwClvl);  /* Set power for hard pulses */

   delay(4.0e-6);

   decrgpulse(pwC,zero,0.0,0.0); 

   delay(2.0e-6);
   zgradpulse(gzlvl1,gt1);
   delay(2.0e-6);
   decphase(zero);

   delay(10.0e-3 - gt1 - gt0 - 8.0e-6);
   
   rgpulse(pw,zero,0.0,0.0);

   delay(2.0e-6);
   zgradpulse(gzlvl2,gt2);
   delay(gstab);

  decphase(zero);
  delay(tauf - gt2 - gstab -2.0e-6 - POWER_DELAY - 4.0e-6 
       - PRG_START_DELAY - d_mei);

   /* INEPT CHIRP inversion  on */

   decpower(dchrpi);  /* Set power for chirp inversion */
   delay(4.0e-6);
   decprgon(chshpi,1.0/dmfchpi,dres_chp);
   decon();

   delay(d_mei);

   rgp

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ decrypt函数代码示例发布时间：2022-05-30

C++ decrement函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

2023-10-27

florent37/ViewAnimator: A fluent Android

2022-08-15

florent37/Shrine-MaterialDesign2: implem

2022-08-17

CVE-2020-36276

2022-09-23

SimpleSoftwareIO/simple-sms: Send and re

2022-08-13

阅读排行榜

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19254|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10006|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8650|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9676|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件