本文整理汇总了C++中debugl1函数的典型用法代码示例。如果您正苦于以下问题：C++ debugl1函数的具体用法？C++ debugl1怎么用？C++ debugl1使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了debugl1函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: W6692_interrupt
static irqreturn_t
W6692_interrupt(int intno, void *dev_id)
{
struct IsdnCardState *cs = dev_id;
u_char val, exval, v1;
struct sk_buff *skb;
u_int count;
u_long flags;
int icnt = 5;
spin_lock_irqsave(&cs->lock, flags);
val = cs->readW6692(cs, W_ISTA);
if (!val) {
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_NONE;
}
StartW6692:
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "W6692 ISTA %x", val);
if (val & W_INT_D_RME) { /* RME */
exval = cs->readW6692(cs, W_D_RSTA);
if (exval & (W_D_RSTA_RDOV | W_D_RSTA_CRCE | W_D_RSTA_RMB)) {
if (exval & W_D_RSTA_RDOV)
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "W6692 RDOV");
if (exval & W_D_RSTA_CRCE)
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "W6692 D-channel CRC error");
if (exval & W_D_RSTA_RMB)
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "W6692 D-channel ABORT");
cs->writeW6692(cs, W_D_CMDR, W_D_CMDR_RACK | W_D_CMDR_RRST);
} else {
count = cs->readW6692(cs, W_D_RBCL) & (W_D_FIFO_THRESH - 1);
if (count == 0)
count = W_D_FIFO_THRESH;
W6692_empty_fifo(cs, count);
if ((count = cs->rcvidx) > 0) {
cs->rcvidx = 0;
if (!(skb = alloc_skb(count, GFP_ATOMIC)))
printk(KERN_WARNING "HiSax: D receive out of memory\n");
else {
memcpy(skb_put(skb, count), cs->rcvbuf, count);
skb_queue_tail(&cs->rq, skb);
}
}
}
cs->rcvidx = 0;
schedule_event(cs, D_RCVBUFREADY);
}
if (val & W_INT_D_RMR) { /* RMR */
W6692_empty_fifo(cs, W_D_FIFO_THRESH);
}
if (val & W_INT_D_XFR) { /* XFR */
if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
del_timer(&cs->dbusytimer);
if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
schedule_event(cs, D_CLEARBUSY);
if (cs->tx_skb) {
if (cs->tx_skb->len) {
W6692_fill_fifo(cs);
goto afterXFR;
} else {
dev_kfree_skb_irq(cs->tx_skb);
cs->tx_cnt = 0;
cs->tx_skb = NULL;
}
}
if ((cs->tx_skb = skb_dequeue(&cs->sq))) {
cs->tx_cnt = 0;
W6692_fill_fifo(cs);
} else
schedule_event(cs, D_XMTBUFREADY);
}
afterXFR:
if (val & (W_INT_XINT0 | W_INT_XINT1)) { /* XINT0/1 - never */
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "W6692 spurious XINT!");
}
if (val & W_INT_D_EXI) { /* EXI */
exval = cs->readW6692(cs, W_D_EXIR);
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "W6692 D_EXIR %02x", exval);
if (exval & (W_D_EXI_XDUN | W_D_EXI_XCOL)) { /* Transmit underrun/collision */
debugl1(cs, "W6692 D-chan underrun/collision");
printk(KERN_WARNING "HiSax: W6692 XDUN/XCOL\n");
if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
del_timer(&cs->dbusytimer);
if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
schedule_event(cs, D_CLEARBUSY);
if (cs->tx_skb) { /* Restart frame */
skb_push(cs->tx_skb, cs->tx_cnt);
cs->tx_cnt = 0;
W6692_fill_fifo(cs);
} else {
printk(KERN_WARNING "HiSax: W6692 XDUN/XCOL no skb\n");
debugl1(cs, "W6692 XDUN/XCOL no skb");
cs->writeW6692(cs, W_D_CMDR, W_D_CMDR_XRST);
}
//.........这里部分代码省略.........
开发者ID:ManiacTwister，项目名称:linux-hnd，代码行数:101，代码来源:w6692.c
示例2: Amd7930_interrupt
void Amd7930_interrupt(struct IsdnCardState *cs, BYTE irflags)
{
BYTE dsr1, dsr2, lsr;
WORD der;
while (irflags)
{
dsr1 = rByteAMD(cs, 0x02);
der = rWordAMD(cs, 0x03);
dsr2 = rByteAMD(cs, 0x07);
lsr = rByteAMD(cs, 0xA1);
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Amd7930: interrupt: flags: 0x%02X, DSR1: 0x%02X, DSR2: 0x%02X, LSR: 0x%02X, DER=0x%04X", irflags, dsr1, dsr2, lsr, der);
/* D error -> read DER and DSR2 bit 2 */
if (der || (dsr2 & 4)) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "Amd7930: interrupt: D error DER=0x%04X", der);
/* RX, TX abort if collision detected */
if (der & 2) {
wByteAMD(cs, 0x21, 0xC2);
wByteAMD(cs, 0x21, 0x02);
if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
del_timer(&cs->dbusytimer);
if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
schedule_event(cs, D_CLEARBUSY);
/* restart frame */
if (cs->tx_skb) {
skb_push(cs->tx_skb, cs->tx_cnt);
cs->tx_cnt = 0;
cs->dc.amd7930.tx_xmtlen = 0;
Amd7930_fill_Dfifo(cs);
} else {
printk(KERN_WARNING "HiSax: Amd7930 D-Collision, no skb\n");
debugl1(cs, "Amd7930: interrupt: D-Collision, no skb");
}
}
/* remove damaged data from fifo */
Amd7930_empty_Dfifo(cs, 1);
if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
del_timer(&cs->dbusytimer);
if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
schedule_event(cs, D_CLEARBUSY);
/* restart TX-Frame */
if (cs->tx_skb) {
skb_push(cs->tx_skb, cs->tx_cnt);
cs->tx_cnt = 0;
cs->dc.amd7930.tx_xmtlen = 0;
Amd7930_fill_Dfifo(cs);
}
}
/* D TX FIFO empty -> fill */
if (irflags & 1) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Amd7930: interrupt: clear Timer and fill D-TX-FIFO if data");
/* AMD interrupts off */
AmdIrqOff(cs);
if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
del_timer(&cs->dbusytimer);
if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
schedule_event(cs, D_CLEARBUSY);
if (cs->tx_skb) {
if (cs->tx_skb->len)
Amd7930_fill_Dfifo(cs);
}
/* AMD interrupts on */
AmdIrqOn(cs);
}
/* D RX FIFO full or tiny packet in Fifo -> empty */
if ((irflags & 2) || (dsr1 & 2)) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Amd7930: interrupt: empty D-FIFO");
Amd7930_empty_Dfifo(cs, 0);
}
/* D-Frame transmit complete */
if (dsr1 & 64) {
if (cs->debug & L1_DEB_ISAC) {
debugl1(cs, "Amd7930: interrupt: transmit packet ready");
}
/* AMD interrupts off */
AmdIrqOff(cs);
if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
del_timer(&cs->dbusytimer);
if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
schedule_event(cs, D_CLEARBUSY);
if (cs->tx_skb) {
//.........这里部分代码省略.........
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:101，代码来源:amd7930_fn.c
示例3: DC_Close_Amd7930
static void
DC_Close_Amd7930(struct IsdnCardState *cs) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Amd7930: DC_Close called");
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:5，代码来源:amd7930_fn.c
示例4: Memhscx_int_main
static inline void
Memhscx_int_main(struct IsdnCardState *cs, u_char val)
{
u_char exval;
struct BCState *bcs;
if (val & 0x01) {
bcs = cs->bcs + 1;
exval = MemReadHSCX(cs, 1, HSCX_EXIR);
if (exval & 0x40) {
if (bcs->mode == 1)
Memhscx_fill_fifo(bcs);
else {
/* Here we lost an TX interrupt, so
* restart transmitting the whole frame.
*/
if (bcs->tx_skb) {
skb_push(bcs->tx_skb, bcs->hw.hscx.count);
bcs->tx_cnt += bcs->hw.hscx.count;
bcs->hw.hscx.count = 0;
}
MemWriteHSCXCMDR(cs, bcs->hw.hscx.hscx, 0x01);
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "HSCX B EXIR %x Lost TX", exval);
}
} else if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "HSCX B EXIR %x", exval);
}
if (val & 0xf8) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "HSCX B interrupt %x", val);
Memhscx_interrupt(cs, val, 1);
}
if (val & 0x02) {
bcs = cs->bcs;
exval = MemReadHSCX(cs, 0, HSCX_EXIR);
if (exval & 0x40) {
if (bcs->mode == L1_MODE_TRANS)
Memhscx_fill_fifo(bcs);
else {
/* Here we lost an TX interrupt, so
* restart transmitting the whole frame.
*/
if (bcs->tx_skb) {
skb_push(bcs->tx_skb, bcs->hw.hscx.count);
bcs->tx_cnt += bcs->hw.hscx.count;
bcs->hw.hscx.count = 0;
}
MemWriteHSCXCMDR(cs, bcs->hw.hscx.hscx, 0x01);
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "HSCX A EXIR %x Lost TX", exval);
}
} else if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "HSCX A EXIR %x", exval);
}
if (val & 0x04) {
exval = MemReadHSCX(cs, 0, HSCX_ISTA);
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "HSCX A interrupt %x", exval);
Memhscx_interrupt(cs, exval, 0);
}
}
开发者ID:nhanh0，项目名称:hah，代码行数:63，代码来源:diva.c
示例5: Amd7930_empty_Dfifo
static void
Amd7930_empty_Dfifo(struct IsdnCardState *cs, int flag)
{
BYTE stat, der;
BYTE *ptr;
struct sk_buff *skb;
if ((cs->debug & L1_DEB_ISAC) && !(cs->debug & L1_DEB_ISAC_FIFO))
debugl1(cs, "Amd7930: empty_Dfifo");
ptr = cs->rcvbuf + cs->rcvidx;
/* AMD interrupts off */
AmdIrqOff(cs);
/* read D-Channel-Fifo*/
stat = rByteAMD(cs, 0x07); // DSR2
/* while Data in Fifo ... */
while ( (stat & 2) && ((ptr-cs->rcvbuf) < MAX_DFRAME_LEN_L1) ) {
*ptr = rByteAMD(cs, 0x04); // DCRB
ptr++;
stat = rByteAMD(cs, 0x07); // DSR2
cs->rcvidx = ptr - cs->rcvbuf;
/* Paket ready? */
if (stat & 1) {
der = rWordAMD(cs, 0x03);
/* no errors, packet ok */
if(!der && !flag) {
rWordAMD(cs, 0x89); // clear DRCR
if ((cs->rcvidx) > 0) {
if (!(skb = alloc_skb(cs->rcvidx, GFP_ATOMIC)))
printk(KERN_WARNING "HiSax: Amd7930: empty_Dfifo, D receive out of memory!\n");
else {
/* Debugging */
if (cs->debug & L1_DEB_ISAC_FIFO) {
char *t = cs->dlog;
t += sprintf(t, "Amd7930: empty_Dfifo cnt: %d |", cs->rcvidx);
QuickHex(t, cs->rcvbuf, cs->rcvidx);
debugl1(cs, cs->dlog);
}
/* moves received data in sk-buffer */
memcpy(skb_put(skb, cs->rcvidx), cs->rcvbuf, cs->rcvidx);
skb_queue_tail(&cs->rq, skb);
}
}
}
/* throw damaged packets away, reset receive-buffer, indicate RX */
ptr = cs->rcvbuf;
cs->rcvidx = 0;
schedule_event(cs, D_RCVBUFREADY);
}
}
/* Packet to long, overflow */
if(cs->rcvidx >= MAX_DFRAME_LEN_L1) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "AMD7930: empty_Dfifo L2-Framelength overrun");
cs->rcvidx = 0;
return;
}
/* AMD interrupts on */
AmdIrqOn(cs);
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:72，代码来源:amd7930_fn.c
示例6: netjet_s_interrupt
static irqreturn_t
netjet_s_interrupt(int intno, void *dev_id, struct pt_regs *regs)
{
struct IsdnCardState *cs = dev_id;
u_char val, s1val, s0val;
u_long flags;
spin_lock_irqsave(&cs->lock, flags);
s1val = bytein(cs->hw.njet.base + NETJET_IRQSTAT1);
if (!(s1val & NETJET_ISACIRQ)) {
val = NETjet_ReadIC(cs, ISAC_ISTA);
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "tiger: i1 %x %x", s1val, val);
if (val) {
isac_interrupt(cs, val);
NETjet_WriteIC(cs, ISAC_MASK, 0xFF);
NETjet_WriteIC(cs, ISAC_MASK, 0x0);
}
s1val = 1;
} else
s1val = 0;
/*
* read/write stat0 is better, because lower IRQ rate
* Note the IRQ is on for 125 us if a condition match
* thats long on modern CPU and so the IRQ is reentered
* all the time.
*/
s0val = bytein(cs->hw.njet.base + NETJET_IRQSTAT0);
if ((s0val | s1val)==0) { // shared IRQ
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_NONE;
}
if (s0val)
byteout(cs->hw.njet.base + NETJET_IRQSTAT0, s0val);
/* start new code 13/07/00 GE */
/* set bits in sval to indicate which page is free */
if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
/* the 2nd write page is free */
s0val = 0x08;
else /* the 1st write page is free */
s0val = 0x04;
if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
/* the 2nd read page is free */
s0val |= 0x02;
else /* the 1st read page is free */
s0val |= 0x01;
if (s0val != cs->hw.njet.last_is0) /* we have a DMA interrupt */
{
if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
printk(KERN_WARNING "nj LOCK_ATOMIC s0val %x->%x\n",
cs->hw.njet.last_is0, s0val);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
cs->hw.njet.irqstat0 = s0val;
if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) !=
(cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
/* we have a read dma int */
read_tiger(cs);
if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
(cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
/* we have a write dma int */
write_tiger(cs);
/* end new code 13/07/00 GE */
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
}
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:71，代码来源:nj_s.c
示例7: hfc_empty_fifo
static struct sk_buff
*
hfc_empty_fifo(struct BCState *bcs, int count)
{
u_char *ptr;
struct sk_buff *skb;
struct IsdnCardState *cs = bcs->cs;
int idx;
int chksum;
u_char stat, cip;
if ((cs->debug & L1_DEB_HSCX) && !(cs->debug & L1_DEB_HSCX_FIFO))
debugl1(cs, "hfc_empty_fifo");
idx = 0;
if (count > HSCX_BUFMAX + 3) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "hfc_empty_fifo: incoming packet too large");
cip = HFC_CIP | HFC_FIFO_OUT | HFC_REC | HFC_CHANNEL(bcs->channel);
while ((idx++ < count) && WaitNoBusy(cs))
cs->BC_Read_Reg(cs, HFC_DATA_NODEB, cip);
WaitNoBusy(cs);
stat = cs->BC_Read_Reg(cs, HFC_DATA, HFC_CIP | HFC_F2_INC | HFC_REC |
HFC_CHANNEL(bcs->channel));
WaitForBusy(cs);
return (NULL);
}
if ((count < 4) && (bcs->mode != L1_MODE_TRANS)) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "hfc_empty_fifo: incoming packet too small");
cip = HFC_CIP | HFC_FIFO_OUT | HFC_REC | HFC_CHANNEL(bcs->channel);
while ((idx++ < count) && WaitNoBusy(cs))
cs->BC_Read_Reg(cs, HFC_DATA_NODEB, cip);
WaitNoBusy(cs);
stat = cs->BC_Read_Reg(cs, HFC_DATA, HFC_CIP | HFC_F2_INC | HFC_REC |
HFC_CHANNEL(bcs->channel));
WaitForBusy(cs);
#ifdef ERROR_STATISTIC
bcs->err_inv++;
#endif
return (NULL);
}
if (bcs->mode == L1_MODE_TRANS)
count -= 1;
else
count -= 3;
if (!(skb = dev_alloc_skb(count)))
printk(KERN_WARNING "HFC: receive out of memory\n");
else {
ptr = skb_put(skb, count);
idx = 0;
cip = HFC_CIP | HFC_FIFO_OUT | HFC_REC | HFC_CHANNEL(bcs->channel);
while ((idx < count) && WaitNoBusy(cs)) {
*ptr++ = cs->BC_Read_Reg(cs, HFC_DATA_NODEB, cip);
idx++;
}
if (idx != count) {
debugl1(cs, "RFIFO BUSY error");
printk(KERN_WARNING "HFC FIFO channel %d BUSY Error\n", bcs->channel);
dev_kfree_skb_any(skb);
if (bcs->mode != L1_MODE_TRANS) {
WaitNoBusy(cs);
stat = cs->BC_Read_Reg(cs, HFC_DATA, HFC_CIP | HFC_F2_INC | HFC_REC |
HFC_CHANNEL(bcs->channel));
WaitForBusy(cs);
}
return (NULL);
}
if (bcs->mode != L1_MODE_TRANS) {
WaitNoBusy(cs);
chksum = (cs->BC_Read_Reg(cs, HFC_DATA, cip) << 8);
WaitNoBusy(cs);
chksum += cs->BC_Read_Reg(cs, HFC_DATA, cip);
WaitNoBusy(cs);
stat = cs->BC_Read_Reg(cs, HFC_DATA, cip);
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc_empty_fifo %d chksum %x stat %x",
bcs->channel, chksum, stat);
if (stat) {
debugl1(cs, "FIFO CRC error");
dev_kfree_skb_any(skb);
skb = NULL;
#ifdef ERROR_STATISTIC
bcs->err_crc++;
#endif
}
WaitNoBusy(cs);
stat = cs->BC_Read_Reg(cs, HFC_DATA, HFC_CIP | HFC_F2_INC | HFC_REC |
HFC_CHANNEL(bcs->channel));
WaitForBusy(cs);
}
}
return (skb);
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:93，代码来源:hfc_2bs0.c
示例8: hfc_fill_fifo
static void
hfc_fill_fifo(struct BCState *bcs)
{
struct IsdnCardState *cs = bcs->cs;
int idx, fcnt;
int count;
int z1, z2;
u_char cip;
if (!bcs->tx_skb)
return;
if (bcs->tx_skb->len <= 0)
return;
cip = HFC_CIP | HFC_F1 | HFC_SEND | HFC_CHANNEL(bcs->channel);
if ((cip & 0xc3) != (cs->hw.hfc.cip & 0xc3)) {
cs->BC_Write_Reg(cs, HFC_STATUS, cip, cip);
WaitForBusy(cs);
}
WaitNoBusy(cs);
if (bcs->mode != L1_MODE_TRANS) {
bcs->hw.hfc.f1 = cs->BC_Read_Reg(cs, HFC_DATA, cip);
cip = HFC_CIP | HFC_F2 | HFC_SEND | HFC_CHANNEL(bcs->channel);
WaitNoBusy(cs);
bcs->hw.hfc.f2 = cs->BC_Read_Reg(cs, HFC_DATA, cip);
bcs->hw.hfc.send[bcs->hw.hfc.f1] = ReadZReg(bcs, HFC_Z1 | HFC_SEND | HFC_CHANNEL(bcs->channel));
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc_fill_fifo %d f1(%d) f2(%d) z1(%x)",
bcs->channel, bcs->hw.hfc.f1, bcs->hw.hfc.f2,
bcs->hw.hfc.send[bcs->hw.hfc.f1]);
fcnt = bcs->hw.hfc.f1 - bcs->hw.hfc.f2;
if (fcnt < 0)
fcnt += 32;
if (fcnt > 30) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc_fill_fifo more as 30 frames");
return;
}
count = GetFreeFifoBytes(bcs);
}
else {
WaitForBusy(cs);
z1 = ReadZReg(bcs, HFC_Z1 | HFC_REC | HFC_CHANNEL(bcs->channel));
z2 = ReadZReg(bcs, HFC_Z2 | HFC_REC | HFC_CHANNEL(bcs->channel));
count = z1 - z2;
if (count < 0)
count += cs->hw.hfc.fifosize;
} /* L1_MODE_TRANS */
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc_fill_fifo %d count(%u/%d)",
bcs->channel, bcs->tx_skb->len,
count);
if (count < bcs->tx_skb->len) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc_fill_fifo no fifo mem");
return;
}
cip = HFC_CIP | HFC_FIFO_IN | HFC_SEND | HFC_CHANNEL(bcs->channel);
idx = 0;
while ((idx < bcs->tx_skb->len) && WaitNoBusy(cs))
cs->BC_Write_Reg(cs, HFC_DATA_NODEB, cip, bcs->tx_skb->data[idx++]);
if (idx != bcs->tx_skb->len) {
debugl1(cs, "FIFO Send BUSY error");
printk(KERN_WARNING "HFC S FIFO channel %d BUSY Error\n", bcs->channel);
} else {
count = bcs->tx_skb->len;
bcs->tx_cnt -= count;
if (PACKET_NOACK == bcs->tx_skb->pkt_type)
count = -1;
dev_kfree_skb_any(bcs->tx_skb);
bcs->tx_skb = NULL;
if (bcs->mode != L1_MODE_TRANS) {
WaitForBusy(cs);
WaitNoBusy(cs);
cs->BC_Read_Reg(cs, HFC_DATA, HFC_CIP | HFC_F1_INC | HFC_SEND | HFC_CHANNEL(bcs->channel));
}
if (test_bit(FLG_LLI_L1WAKEUP, &bcs->st->lli.flag) &&
(count >= 0)) {
u_long flags;
spin_lock_irqsave(&bcs->aclock, flags);
bcs->ackcnt += count;
spin_unlock_irqrestore(&bcs->aclock, flags);
schedule_event(bcs, B_ACKPENDING);
}
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
}
return;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:88，代码来源:hfc_2bs0.c
示例9: arcofi_fsm
int
arcofi_fsm(struct IsdnCardState *cs, int event, void *data) {
if (cs->debug & L1_DEB_MONITOR) {
debugl1(cs, "arcofi state %d event %d", cs->dc.isac.arcofi_state, event);
}
if (event == ARCOFI_TIMEOUT) {
cs->dc.isac.arcofi_state = ARCOFI_NOP;
test_and_set_bit(FLG_ARCOFI_ERROR, &cs->HW_Flags);
wake_up(&cs->dc.isac.arcofi_wait);
return(1);
}
switch (cs->dc.isac.arcofi_state) {
case ARCOFI_NOP:
if (event == ARCOFI_START) {
cs->dc.isac.arcofi_list = data;
cs->dc.isac.arcofi_state = ARCOFI_TRANSMIT;
send_arcofi(cs);
}
break;
case ARCOFI_TRANSMIT:
if (event == ARCOFI_TX_END) {
if (cs->dc.isac.arcofi_list->receive) {
add_arcofi_timer(cs);
cs->dc.isac.arcofi_state = ARCOFI_RECEIVE;
} else {
if (cs->dc.isac.arcofi_list->next) {
cs->dc.isac.arcofi_list =
cs->dc.isac.arcofi_list->next;
send_arcofi(cs);
} else {
if (test_and_clear_bit(FLG_ARCOFI_TIMER, &cs->HW_Flags)) {
del_timer(&cs->dc.isac.arcofitimer);
}
cs->dc.isac.arcofi_state = ARCOFI_NOP;
wake_up(&cs->dc.isac.arcofi_wait);
}
}
}
break;
case ARCOFI_RECEIVE:
if (event == ARCOFI_RX_END) {
if (cs->dc.isac.arcofi_list->next) {
cs->dc.isac.arcofi_list =
cs->dc.isac.arcofi_list->next;
cs->dc.isac.arcofi_state = ARCOFI_TRANSMIT;
send_arcofi(cs);
} else {
if (test_and_clear_bit(FLG_ARCOFI_TIMER, &cs->HW_Flags)) {
del_timer(&cs->dc.isac.arcofitimer);
}
cs->dc.isac.arcofi_state = ARCOFI_NOP;
wake_up(&cs->dc.isac.arcofi_wait);
}
}
break;
default:
debugl1(cs, "Arcofi unknown state %x", cs->dc.isac.arcofi_state);
return(2);
}
return(0);
}
开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-ef_fw-20-19-8，代码行数:61，代码来源:arcofi.c
示例10: icc_interrupt
void
icc_interrupt(struct IsdnCardState *cs, u_char val)
{
u_char exval, v1;
struct sk_buff *skb;
unsigned int count;
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ICC interrupt %x", val);
if (val & 0x80) { /* RME */
exval = cs->readisac(cs, ICC_RSTA);
if ((exval & 0x70) != 0x20) {
if (exval & 0x40) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "ICC RDO");
#ifdef ERROR_STATISTIC
cs->err_rx++;
#endif
}
if (!(exval & 0x20)) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "ICC CRC error");
#ifdef ERROR_STATISTIC
cs->err_crc++;
#endif
}
cs->writeisac(cs, ICC_CMDR, 0x80);
} else {
count = cs->readisac(cs, ICC_RBCL) & 0x1f;
if (count == 0)
count = 32;
icc_empty_fifo(cs, count);
if ((count = cs->rcvidx) > 0) {
cs->rcvidx = 0;
if (!(skb = alloc_skb(count, GFP_ATOMIC)))
printk(KERN_WARNING "HiSax: D receive out of memory\n");
else {
memcpy(skb_put(skb, count), cs->rcvbuf, count);
skb_queue_tail(&cs->rq, skb);
}
}
}
cs->rcvidx = 0;
schedule_event(cs, D_RCVBUFREADY);
}
if (val & 0x40) { /* RPF */
icc_empty_fifo(cs, 32);
}
if (val & 0x20) { /* RSC */
/* never */
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "ICC RSC interrupt");
}
if (val & 0x10) { /* XPR */
if (test_and_clear_bit(FLG_DBUSY_TIMER, &cs->HW_Flags))
del_timer(&cs->dbusytimer);
if (test_and_clear_bit(FLG_L1_DBUSY, &cs->HW_Flags))
schedule_event(cs, D_CLEARBUSY);
if (cs->tx_skb) {
if (cs->tx_skb->len) {
icc_fill_fifo(cs);
goto afterXPR;
} else {
dev_kfree_skb_irq(cs->tx_skb);
cs->tx_cnt = 0;
cs->tx_skb = NULL;
}
}
if ((cs->tx_skb = skb_dequeue(&cs->sq))) {
cs->tx_cnt = 0;
icc_fill_fifo(cs);
} else
schedule_event(cs, D_XMTBUFREADY);
}
afterXPR:
if (val & 0x04) { /* CISQ */
exval = cs->readisac(cs, ICC_CIR0);
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ICC CIR0 %02X", exval );
if (exval & 2) {
cs->dc.icc.ph_state = (exval >> 2) & 0xf;
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ph_state change %x", cs->dc.icc.ph_state);
schedule_event(cs, D_L1STATECHANGE);
}
开发者ID:DentonGentry，项目名称:gfiber-gfrg100，代码行数:85，代码来源:icc.c
示例11: W6692_l1hw
static void
W6692_l1hw(struct PStack *st, int pr, void *arg)
{
struct IsdnCardState *cs = (struct IsdnCardState *) st->l1.hardware;
struct sk_buff *skb = arg;
u_long flags;
int val;
switch (pr) {
case (PH_DATA | REQUEST):
if (cs->debug & DEB_DLOG_HEX)
LogFrame(cs, skb->data, skb->len);
if (cs->debug & DEB_DLOG_VERBOSE)
dlogframe(cs, skb, 0);
spin_lock_irqsave(&cs->lock, flags);
if (cs->tx_skb) {
skb_queue_tail(&cs->sq, skb);
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
Logl2Frame(cs, skb, "PH_DATA Queued", 0);
#endif
} else {
cs->tx_skb = skb;
cs->tx_cnt = 0;
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
Logl2Frame(cs, skb, "PH_DATA", 0);
#endif
W6692_fill_fifo(cs);
}
spin_unlock_irqrestore(&cs->lock, flags);
break;
case (PH_PULL | INDICATION):
spin_lock_irqsave(&cs->lock, flags);
if (cs->tx_skb) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, " l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
spin_unlock_irqrestore(&cs->lock, flags);
break;
}
if (cs->debug & DEB_DLOG_HEX)
LogFrame(cs, skb->data, skb->len);
if (cs->debug & DEB_DLOG_VERBOSE)
dlogframe(cs, skb, 0);
cs->tx_skb = skb;
cs->tx_cnt = 0;
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
Logl2Frame(cs, skb, "PH_DATA_PULLED", 0);
#endif
W6692_fill_fifo(cs);
spin_unlock_irqrestore(&cs->lock, flags);
break;
case (PH_PULL | REQUEST):
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
debugl1(cs, "-> PH_REQUEST_PULL");
#endif
if (!cs->tx_skb) {
test_and_clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
st->l1.l1l2(st, PH_PULL | CONFIRM, NULL);
} else
test_and_set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
break;
case (HW_RESET | REQUEST):
spin_lock_irqsave(&cs->lock, flags);
if ((cs->dc.w6692.ph_state == W_L1IND_DRD)) {
ph_command(cs, W_L1CMD_ECK);
spin_unlock_irqrestore(&cs->lock, flags);
} else {
ph_command(cs, W_L1CMD_RST);
cs->dc.w6692.ph_state = W_L1CMD_RST;
spin_unlock_irqrestore(&cs->lock, flags);
W6692_new_ph(cs);
}
break;
case (HW_ENABLE | REQUEST):
spin_lock_irqsave(&cs->lock, flags);
ph_command(cs, W_L1CMD_ECK);
spin_unlock_irqrestore(&cs->lock, flags);
break;
case (HW_INFO3 | REQUEST):
spin_lock_irqsave(&cs->lock, flags);
ph_command(cs, W_L1CMD_AR8);
spin_unlock_irqrestore(&cs->lock, flags);
break;
case (HW_TESTLOOP | REQUEST):
val = 0;
if (1 & (long) arg)
val |= 0x0c;
if (2 & (long) arg)
val |= 0x3;
/* !!! not implemented yet */
break;
case (HW_DEACTIVATE | RESPONSE):
skb_queue_purge(&cs->rq);
skb_queue_purge(&cs->sq);
if (cs->tx_skb) {
dev_kfree_skb_any(cs->tx_skb);
//.........这里部分代码省略.........
开发者ID:ManiacTwister，项目名称:linux-hnd，代码行数:101，代码来源:w6692.c
示例12: hfc2bds0_interrupt
void
hfc2bds0_interrupt(struct IsdnCardState *cs, u_char val)
{
u_char exval;
struct BCState *bcs;
int count=15;
long flags;
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "HFCD irq %x %s", val,
test_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags) ?
"locked" : "unlocked");
val &= cs->hw.hfcD.int_m1;
if (val & 0x40) { /* TE state machine irq */
exval = cs->readisac(cs, HFCD_STATES) & 0xf;
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ph_state chg %d->%d", cs->dc.hfcd.ph_state,
exval);
cs->dc.hfcd.ph_state = exval;
sched_event_D(cs, D_L1STATECHANGE);
val &= ~0x40;
}
while (val) {
save_flags(flags);
cli();
if (test_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
cs->hw.hfcD.int_s1 |= val;
restore_flags(flags);
return;
}
if (cs->hw.hfcD.int_s1 & 0x18) {
exval = val;
val = cs->hw.hfcD.int_s1;
cs->hw.hfcD.int_s1 = exval;
}
if (val & 0x08) {
if (!(bcs=Sel_BCS(cs, 0))) {
if (cs->debug)
debugl1(cs, "hfcd spurious 0x08 IRQ");
} else
main_rec_2bds0(bcs);
}
if (val & 0x10) {
if (!(bcs=Sel_BCS(cs, 1))) {
if (cs->debug)
debugl1(cs, "hfcd spurious 0x10 IRQ");
} else
main_rec_2bds0(bcs);
}
if (val & 0x01) {
if (!(bcs=Sel_BCS(cs, 0))) {
if (cs->debug)
debugl1(cs, "hfcd spurious 0x01 IRQ");
} else {
if (bcs->tx_skb) {
if (!test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
hfc_fill_fifo(bcs);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
} else
debugl1(cs,"fill_data %d blocked", bcs->channel);
} else {
if ((bcs->tx_skb = skb_dequeue(&bcs->squeue))) {
if (!test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
hfc_fill_fifo(bcs);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
} else
debugl1(cs,"fill_data %d blocked", bcs->channel);
} else {
hfc_sched_event(bcs, B_XMTBUFREADY);
}
}
}
}
if (val & 0x02) {
if (!(bcs=Sel_BCS(cs, 1))) {
if (cs->debug)
debugl1(cs, "hfcd spurious 0x02 IRQ");
} else {
if (bcs->tx_skb) {
if (!test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
hfc_fill_fifo(bcs);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
} else
debugl1(cs,"fill_data %d blocked", bcs->channel);
} else {
if ((bcs->tx_skb = skb_dequeue(&bcs->squeue))) {
if (!test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
hfc_fill_fifo(bcs);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
} else
debugl1(cs,"fill_data %d blocked", bcs->channel);
} else {
hfc_sched_event(bcs, B_XMTBUFREADY);
}
}
}
}
if (val & 0x20) { /* receive dframe */
receive_dmsg(cs);
}
//.........这里部分代码省略.........
开发者ID:nhanh0，项目名称:hah，代码行数:101，代码来源:hfc_2bds0.c
示例13: main_irq_hfc
void
main_irq_hfc(struct BCState *bcs)
{
struct IsdnCardState *cs = bcs->cs;
int z1, z2, rcnt;
u_char f1, f2, cip;
int receive, transmit, count = 5;
struct sk_buff *skb;
Begin:
count--;
cip = HFC_CIP | HFC_F1 | HFC_REC | HFC_CHANNEL(bcs->channel);
if ((cip & 0xc3) != (cs->hw.hfc.cip & 0xc3)) {
cs->BC_Write_Reg(cs, HFC_STATUS, cip, cip);
WaitForBusy(cs);
}
WaitNoBusy(cs);
receive = 0;
if (bcs->mode == L1_MODE_HDLC) {
f1 = cs->BC_Read_Reg(cs, HFC_DATA, cip);
cip = HFC_CIP | HFC_F2 | HFC_REC | HFC_CHANNEL(bcs->channel);
WaitNoBusy(cs);
f2 = cs->BC_Read_Reg(cs, HFC_DATA, cip);
if (f1 != f2) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc rec %d f1(%d) f2(%d)",
bcs->channel, f1, f2);
receive = 1;
}
}
if (receive || (bcs->mode == L1_MODE_TRANS)) {
WaitForBusy(cs);
z1 = ReadZReg(bcs, HFC_Z1 | HFC_REC | HFC_CHANNEL(bcs->channel));
z2 = ReadZReg(bcs, HFC_Z2 | HFC_REC | HFC_CHANNEL(bcs->channel));
rcnt = z1 - z2;
if (rcnt < 0)
rcnt += cs->hw.hfc.fifosize;
if ((bcs->mode == L1_MODE_HDLC) || (rcnt)) {
rcnt++;
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc rec %d z1(%x) z2(%x) cnt(%d)",
bcs->channel, z1, z2, rcnt);
/* sti(); */
if ((skb = hfc_empty_fifo(bcs, rcnt))) {
skb_queue_tail(&bcs->rqueue, skb);
schedule_event(bcs, B_RCVBUFREADY);
}
}
receive = 1;
}
if (bcs->tx_skb) {
transmit = 1;
test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
hfc_fill_fifo(bcs);
if (test_bit(BC_FLG_BUSY, &bcs->Flag))
transmit = 0;
} else {
if ((bcs->tx_skb = skb_dequeue(&bcs->squeue))) {
transmit = 1;
test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
hfc_fill_fifo(bcs);
if (test_bit(BC_FLG_BUSY, &bcs->Flag))
transmit = 0;
} else {
transmit = 0;
schedule_event(bcs, B_XMTBUFREADY);
}
}
if ((receive || transmit) && count)
goto Begin;
return;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:72，代码来源:hfc_2bs0.c
示例14: HFCD_l1hw
static void
HFCD_l1hw(struct PStack *st, int pr, void *arg)
{
struct IsdnCardState *cs = (struct IsdnCardState *) st->l1.hardware;
struct sk_buff *skb = arg;
switch (pr) {
case (PH_DATA | REQUEST):
if (cs->debug & DEB_DLOG_HEX)
LogFrame(cs, skb->data, skb->len);
if (cs->debug & DEB_DLOG_VERBOSE)
dlogframe(cs, skb, 0);
if (cs->tx_skb) {
skb_queue_tail(&cs->sq, skb);
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
Logl2Frame(cs, skb, "PH_DATA Queued", 0);
#endif
} else {
cs->tx_skb = skb;
cs->tx_cnt = 0;
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
Logl2Frame(cs, skb, "PH_DATA", 0);
#endif
if (!test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
hfc_fill_dfifo(cs);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
} else
debugl1(cs, "hfc_fill_dfifo blocked");
}
break;
case (PH_PULL | INDICATION):
if (cs->tx_skb) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, " l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
break;
}
if (cs->debug & DEB_DLOG_HEX)
LogFrame(cs, skb->data, skb->len);
if (cs->debug & DEB_DLOG_VERBOSE)
dlogframe(cs, skb, 0);
cs->tx_skb = skb;
cs->tx_cnt = 0;
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
Logl2Frame(cs, skb, "PH_DATA_PULLED", 0);
#endif
if (!test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
hfc_fill_dfifo(cs);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
} else
debugl1(cs, "hfc_fill_dfifo blocked");
break;
case (PH_PULL | REQUEST):
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
debugl1(cs, "-> PH_REQUEST_PULL");
#endif
if (!cs->tx_skb) {
test_and_clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
st->l1.l1l2(st, PH_PULL | CONFIRM, NULL);
} else
test_and_set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
break;
case (HW_RESET | REQUEST):
cs->writeisac(cs, HFCD_STATES, HFCD_LOAD_STATE | 3); /* HFC ST 3 */
udelay(6);
cs->writeisac(cs, HFCD_STATES, 3); /* HFC ST 2 */
cs->hw.hfcD.mst_m |= HFCD_MASTER;
cs->writeisac(cs, HFCD_MST_MODE, cs->hw.hfcD.mst_m);
cs->writeisac(cs, HFCD_STATES, HFCD_ACTIVATE | HFCD_DO_ACTION);
l1_msg(cs, HW_POWERUP | CONFIRM, NULL);
break;
case (HW_ENABLE | REQUEST):
cs->writeisac(cs, HFCD_STATES, HFCD_ACTIVATE | HFCD_DO_ACTION);
break;
case (HW_DEACTIVATE | REQUEST):
cs->hw.hfcD.mst_m &= ~HFCD_MASTER;
cs->writeisac(cs, HFCD_MST_MODE, cs->hw.hfcD.mst_m);
break;
case (HW_INFO3 | REQUEST):
cs->hw.hfcD.mst_m |= HFCD_MASTER;
cs->writeisac(cs, HFCD_MST_MODE, cs->hw.hfcD.mst_m);
break;
default:
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "hfcd_l1hw unknown pr %4x", pr);
break;
}
}
开发者ID:nhanh0，项目名称:hah，代码行数:93，代码来源:hfc_2bds0.c
示例15: DChannel_proc_rcv
void
DChannel_proc_rcv(struct IsdnCardState *cs)
{
struct sk_buff *skb, *nskb;
struct PStack *stptr = cs->stlist;
int found, tei, sapi;
if (stptr)
if (test_bit(FLG_L1_ACTTIMER, &stptr->l1.Flags))
FsmEvent(&stptr->l1.l1m, EV_TIMER_ACT, NULL);
while ((skb = skb_dequeue(&cs->rq))) {
#ifdef L2FRAME_DEBUG /* psa */
if (cs->debug & L1_DEB_LAPD)
Logl2Frame(cs, skb, "PH_DATA", 1);
#endif
stptr = cs->stlist;
if (skb->len<3) {
debugl1(cs, "D-channel frame too short(%d)",skb->len);
dev_kfree_skb(skb);
return;
}
if ((skb->data[0] & 1) || !(skb->data[1] &1)) {
debugl1(cs, "D-channel frame wrong EA0/EA1");
dev_kfree_skb(skb);
return;
}
sapi = skb->data[0] >> 2;
tei = skb->data[1] >> 1;
if (cs->debug & DEB_DLOG_HEX)
LogFrame(cs, skb->data, skb->len);
if (cs->debug & DEB_DLOG_VERBOSE)
dlogframe(cs, skb, 1);
if (tei == GROUP_TEI) {
if (sapi == CTRL_SAPI) { /* sapi 0 */
while (stptr != NULL) {
if ((nskb = skb_clone(skb, GFP_ATOMIC)))
stptr->l1.l1l2(stptr, PH_DATA | INDICATION, nskb);
else
printk(KERN_WARNING "HiSax: isdn broadcast buffer shortage\n");
stptr = stptr->next;
}
} else if (sapi == TEI_SAPI) {
while (stptr != NULL) {
if ((nskb = skb_clone(skb, GFP_ATOMIC)))
stptr->l1.l1tei(stptr, PH_DATA | INDICATION, nskb);
else
printk(KERN_WARNING "HiSax: tei broadcast buffer shortage\n");
stptr = stptr->next;
}
}
dev_kfree_skb(skb);
} else if (sapi == CTRL_SAPI) { /* sapi 0 */
found = 0;
while (stptr != NULL)
if (tei == stptr->l2.tei) {
stptr->l1.l1l2(stptr, PH_DATA | INDICATION, skb);
found = !0;
break;
} else
stptr = stptr->next;
if (!found)
dev_kfree_skb(skb);
} else
dev_kfree_skb(skb);
}
}
开发者ID:DentonGentry，项目名称:gfiber-gfrg100，代码行数:66，代码来源:isdnl1.c
示例16: debugl1
static struct sk_buff
*hfc_empty_fifo(struct BCState *bcs, int count)
{
u_char *ptr;
struct sk_buff *skb;
struct IsdnCardState *cs = bcs->cs;
int idx;
int chksum;
long flags;
u_char stat, cip;
if ((cs->debug & L1_DEB_HSCX) && !(cs->debug & L1_DEB_HSCX_FIFO))
debugl1(cs, "hfc_empty_fifo");
idx = 0;
save_flags(flags);
if (count > HSCX_BUFMAX + 3) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "hfc_empty_fifo: incoming packet too large");
cip = HFCB_FIFO | HFCB_FIFO_OUT | HFCB_REC | HFCB_CHANNEL(bcs->channel);
while (idx++ < count) {
cli();
WaitNoBusy(cs);
ReadReg(cs, HFCD_DATA_NODEB, cip);
sti();
}
skb = NULL;
} else if (count < 4) {
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "hfc_empty_fifo: incoming packet too small");
cip = HFCB_FIFO | HFCB_FIFO_OUT | HFCB_REC | HFCB_CHANNEL(bcs->channel);
#ifdef ERROR_STATISTIC
bcs->err_inv++;
#endif
cli();
while ((idx++ < count) && WaitNoBusy(cs))
ReadReg(cs, HFCD_DATA_NODEB, cip);
skb = NULL;
} else if (!(skb = dev_alloc_skb(count - 3)))
printk(KERN_WARNING "HFC: receive out of memory\n");
else {
ptr = skb_put(skb, count - 3);
idx = 0;
cip = HFCB_FIFO | HFCB_FIFO_OUT | HFCB_REC | HFCB_CHANNEL(bcs->channel);
cli();
while (idx < (count - 3)) {
cli();
if (!WaitNoBusy(cs))
break;
*ptr = ReadReg(cs, HFCD_DATA_NODEB, cip);
sti();
ptr++;
idx++;
}
if (idx != count - 3) {
sti();
debugl1(cs, "RFIFO BUSY error");
printk(KERN_WARNING "HFC FIFO channel %d BUSY Error\n", bcs->channel);
dev_kfree_skb_irq(skb);
skb = NULL;
} else {
cli();
WaitNoBusy(cs);
chksum = (ReadReg(cs, HFCD_DATA, cip) << 8);
WaitNoBusy(cs);
chksum += ReadReg(cs, HFCD_DATA, cip);
WaitNoBusy(cs);
stat = ReadReg(cs, HFCD_DATA, cip);
sti();
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "hfc_empty_fifo %d chksum %x stat %x",
bcs->channel, chksum, stat);
if (stat) {
debugl1(cs, "FIFO CRC error");
dev_kfree_skb_irq(skb);
skb = NULL;
#ifdef ERROR_STATISTIC
bcs->err_crc++;
#endif
}
}
}
sti();
WaitForBusy(cs);
cli();
WaitNoBusy(cs);
stat = ReadReg(cs, HFCD_DATA, HFCB_FIFO | HFCB_F2_INC |
HFCB_REC | HFCB_CHANNEL(bcs->channel));
sti();
WaitForBusy(cs);
restore_flags(flags);
return (skb);
}
开发者ID:nhanh0，项目名称:hah，代码行数:92，代码来源:hfc_2bds0.c
示例17: Memhscx_interrupt
static inline void
Memhscx_interrupt(struct IsdnCardState *cs, u_char val, u_char hscx)
{
u_char r;
struct BCState *bcs = cs->bcs + hscx;
struct sk_buff *skb;
int fifo_size = test_bit(HW_IPAC, &cs->HW_Flags)? 64: 32;
int count;
if (!test_bit(BC_FLG_INIT, &bcs->Flag))
return;
if (val & 0x80) { /* RME */
r = MemReadHSCX(cs, hscx, HSCX_RSTA);
if ((r & 0xf0) != 0xa0) {
if (!(r & 0x80))
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "HSCX invalid frame");
if ((r & 0x40) && bcs->mode)
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "HSCX RDO mode=%d",
bcs->mode);
if (!(r & 0x20))
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "HSCX CRC error");
MemWriteHSCXCMDR(cs, hscx, 0x80);
} else {
count = MemReadHSCX(cs, hscx, HSCX_RBCL) & (
test_bit(HW_IPAC, &cs->HW_Flags)? 0x3f: 0x1f);
if (count == 0)
count = fifo_size;
Memhscx_empty_fifo(bcs, count);
if ((count = bcs->hw.hscx.rcvidx - 1) > 0) {
if (cs->debug & L1_DEB_HSCX_FIFO)
debugl1(cs, "HX Frame %d", count);
if (!(skb = dev_alloc_skb(count)))
printk(KERN_WARNING "HS
|
客服电话
APP下载
官方微信
请发表评论