• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ debug_called函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中debug_called函数的典型用法代码示例。如果您正苦于以下问题:C++ debug_called函数的具体用法?C++ debug_called怎么用?C++ debug_called使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了debug_called函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: twe_shutdown

/********************************************************************************
 * Bring the controller down to a dormant state and detach all child devices.
 *
 * Note that we can assume that the bioq on the controller is empty, as we won't
 * allow shutdown if any device is open.
 */
static int
twe_shutdown(device_t dev)
{
    struct twe_softc	*sc = device_get_softc(dev);
    int			i, error = 0;

    debug_called(4);

    /* 
     * Delete all our child devices.
     */
    TWE_CONFIG_LOCK(sc);
    for (i = 0; i < TWE_MAX_UNITS; i++) {
	if (sc->twe_drive[i].td_disk != 0) {
	    if ((error = twe_detach_drive(sc, i)) != 0) {
		TWE_CONFIG_UNLOCK(sc);
		return (error);
	    }
	}
    }
    TWE_CONFIG_UNLOCK(sc);

    /*
     * Bring the controller down.
     */
    TWE_IO_LOCK(sc);
    twe_deinit(sc);
    TWE_IO_UNLOCK(sc);

    return(0);
}
开发者ID:JabirTech,项目名称:Source,代码行数:37,代码来源:twe_freebsd.c


示例2: twed_strategy

/********************************************************************************
 * Handle an I/O request.
 */
static void
twed_strategy(struct bio *bp)
{
    struct twed_softc	*sc = bp->bio_disk->d_drv1;

    debug_called(4);

    bp->bio_driver1 = &sc->twed_drive->td_twe_unit;
    TWED_BIO_IN;

    /* bogus disk? */
    if (sc == NULL || sc->twed_drive->td_disk == NULL) {
	bp->bio_error = EINVAL;
	bp->bio_flags |= BIO_ERROR;
	printf("twe: bio for invalid disk!\n");
	biodone(bp);
	TWED_BIO_OUT;
	return;
    }

    /* queue the bio on the controller */
    TWE_IO_LOCK(sc->twed_controller);
    twe_enqueue_bio(sc->twed_controller, bp);

    /* poke the controller to start I/O */
    twe_startio(sc->twed_controller);
    TWE_IO_UNLOCK(sc->twed_controller);
    return;
}
开发者ID:JabirTech,项目名称:Source,代码行数:32,代码来源:twe_freebsd.c


示例3: twe_detach

/********************************************************************************
 * Disconnect from the controller completely, in preparation for unload.
 */
static int
twe_detach(device_t dev)
{
    struct twe_softc	*sc = device_get_softc(dev);

    debug_called(4);

    TWE_IO_LOCK(sc);
    if (sc->twe_state & TWE_STATE_OPEN) {
	TWE_IO_UNLOCK(sc);
	return (EBUSY);
    }
    sc->twe_state |= TWE_STATE_DETACHING;
    TWE_IO_UNLOCK(sc);

    /*	
     * Shut the controller down.
     */
    if (twe_shutdown(dev)) {
	TWE_IO_LOCK(sc);
	sc->twe_state &= ~TWE_STATE_DETACHING;
	TWE_IO_UNLOCK(sc);
	return (EBUSY);
    }

    twe_free(sc);

    return(0);
}
开发者ID:JabirTech,项目名称:Source,代码行数:32,代码来源:twe_freebsd.c


示例4: twed_strategy

/********************************************************************************
 * Handle an I/O request.
 */
static void
twed_strategy(twe_bio *bp)
{
    struct twed_softc	*sc = (struct twed_softc *)TWE_BIO_SOFTC(bp);

    debug_called(4);

    TWED_BIO_IN;

    /* bogus disk? */
    if (sc == NULL) {
	TWE_BIO_SET_ERROR(bp, EINVAL);
	printf("twe: bio for invalid disk!\n");
	TWE_BIO_DONE(bp);
	TWED_BIO_OUT;
	return;
    }

    /* perform accounting */
    TWE_BIO_STATS_START(bp);

    /* queue the bio on the controller */
    twe_enqueue_bio(sc->twed_controller, bp);

    /* poke the controller to start I/O */
    twe_startio(sc->twed_controller);
    return;
}
开发者ID:MarginC,项目名称:kame,代码行数:31,代码来源:twe_freebsd.c


示例5: mly_cam_detach

/********************************************************************************
 * Detach from CAM
 */
void
mly_cam_detach(struct mly_softc *sc)
{
    int		chn, nchn, first;

    debug_called(1);

    nchn = sc->mly_controllerinfo->physical_channels_present +
	sc->mly_controllerinfo->virtual_channels_present;

    /*
     * Iterate over channels, deregistering as we go.
     */
    nchn = sc->mly_controllerinfo->physical_channels_present +
	sc->mly_controllerinfo->virtual_channels_present;
    for (chn = 0, first = 1; chn < nchn; chn++) {

	/*
	 * If a sim was registered for this channel, free it.
	 */
	if (sc->mly_cam_sim[chn] != NULL) {
	    debug(1, "deregister bus %d", chn);
	    xpt_bus_deregister(cam_sim_path(sc->mly_cam_sim[chn]));
	    debug(1, "free sim for channel %d (%sfree queue)", chn, first ? "" : "don't ");
	    cam_sim_free(sc->mly_cam_sim[chn], first ? TRUE : FALSE);
	    first = 0;
	}
    }
}
开发者ID:UnitedMarsupials,项目名称:kame,代码行数:32,代码来源:mly_cam.c


示例6: mlxd_strategy

/*
 * Read/write routine for a buffer.  Finds the proper unit, range checks
 * arguments, and schedules the transfer.  Does not wait for the transfer
 * to complete.  Multi-page transfers are supported.  All I/O requests must
 * be a multiple of a sector in length.
 */
static void
mlxd_strategy(struct bio *bp)
{
    struct mlxd_softc	*sc = bp->bio_disk->d_drv1;

    debug_called(1);

    /* bogus disk? */
    if (sc == NULL) {
        bp->bio_error = EINVAL;
        bp->bio_flags |= BIO_ERROR;
        goto bad;
    }

    /* XXX may only be temporarily offline - sleep? */
    MLX_IO_LOCK(sc->mlxd_controller);
    if (sc->mlxd_drive->ms_state == MLX_SYSD_OFFLINE) {
        MLX_IO_UNLOCK(sc->mlxd_controller);
        bp->bio_error = ENXIO;
        bp->bio_flags |= BIO_ERROR;
        goto bad;
    }

    mlx_submit_buf(sc->mlxd_controller, bp);
    MLX_IO_UNLOCK(sc->mlxd_controller);
    return;

bad:
    /*
     * Correctly set the bio to indicate a failed tranfer.
     */
    bp->bio_resid = bp->bio_bcount;
    biodone(bp);
    return;
}
开发者ID:cyrilmagsuci,项目名称:freebsd,代码行数:41,代码来源:mlx_disk.c


示例7: twe_shutdown

/********************************************************************************
 * Bring the controller down to a dormant state and detach all child devices.
 *
 * Note that we can assume that the bioq on the controller is empty, as we won't
 * allow shutdown if any device is open.
 */
static int
twe_shutdown(device_t dev)
{
    struct twe_softc	*sc = device_get_softc(dev);
    int			i, s, error;

    debug_called(4);

    s = splbio();
    error = 0;

    /* 
     * Delete all our child devices.
     */
    for (i = 0; i < TWE_MAX_UNITS; i++) {
	if (sc->twe_drive[i].td_disk != 0) {
	    if ((error = device_delete_child(sc->twe_dev, sc->twe_drive[i].td_disk)) != 0)
		goto out;
	    sc->twe_drive[i].td_disk = 0;
	}
    }

    /*
     * Bring the controller down.
     */
    twe_deinit(sc);

 out:
    splx(s);
    return(error);
}
开发者ID:MarginC,项目名称:kame,代码行数:37,代码来源:twe_freebsd.c


示例8: amr_pci_shutdown

/********************************************************************************
 * Bring the controller down to a dormant state and detach all child devices.
 *
 * This function is called before detach, system shutdown, or before performing
 * an operation which may add or delete system disks.  (Call amr_startup to
 * resume normal operation.)
 *
 * Note that we can assume that the bioq on the controller is empty, as we won't
 * allow shutdown if any device is open.
 */
static int
amr_pci_shutdown(device_t dev)
{
    struct amr_softc	*sc = device_get_softc(dev);
    int			i,error;

    debug_called(1);

    /* mark ourselves as in-shutdown */
    sc->amr_state |= AMR_STATE_SHUTDOWN;


    /* flush controller */
    device_printf(sc->amr_dev, "flushing cache...");
    printf("%s\n", amr_flush(sc) ? "failed" : "done");

    error = 0;

    /* delete all our child devices */
    for(i = 0 ; i < AMR_MAXLD; i++) {
	if( sc->amr_drive[i].al_disk != 0) {
	    if((error = device_delete_child(sc->amr_dev,sc->amr_drive[i].al_disk)) != 0)
		goto shutdown_out;
	    sc->amr_drive[i].al_disk = 0;
	}
    }

    /* XXX disable interrupts? */

shutdown_out:
    return(error);
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:42,代码来源:amr_pci.c


示例9: twe_free

/********************************************************************************
 * Free all of the resources associated with (sc).
 *
 * Should not be called if the controller is active.
 */
static void
twe_free(struct twe_softc *sc)
{
    struct twe_request	*tr;

    debug_called(4);

    /* throw away any command buffers */
    while ((tr = twe_dequeue_free(sc)) != NULL)
	twe_free_request(tr);

    /* destroy the data-transfer DMA tag */
    if (sc->twe_buffer_dmat)
	bus_dma_tag_destroy(sc->twe_buffer_dmat);

    /* disconnect the interrupt handler */
    if (sc->twe_intr)
	bus_teardown_intr(sc->twe_dev, sc->twe_irq, sc->twe_intr);
    if (sc->twe_irq != NULL)
	bus_release_resource(sc->twe_dev, SYS_RES_IRQ, 0, sc->twe_irq);

    /* destroy the parent DMA tag */
    if (sc->twe_parent_dmat)
	bus_dma_tag_destroy(sc->twe_parent_dmat);

    /* release the register window mapping */
    if (sc->twe_io != NULL)
	bus_release_resource(sc->twe_dev, SYS_RES_IOPORT, TWE_IO_CONFIG_REG, sc->twe_io);

    /* destroy control device */
    if (sc->twe_dev_t != (dev_t)NULL)
	destroy_dev(sc->twe_dev_t);
}
开发者ID:MarginC,项目名称:kame,代码行数:38,代码来源:twe_freebsd.c


示例10: twe_detach

/********************************************************************************
 * Disconnect from the controller completely, in preparation for unload.
 */
static int
twe_detach(device_t dev)
{
    struct twe_softc	*sc = device_get_softc(dev);
    int			s, error;

    debug_called(4);

    error = EBUSY;
    s = splbio();
    if (sc->twe_state & TWE_STATE_OPEN)
	goto out;

    /*	
     * Shut the controller down.
     */
    if ((error = twe_shutdown(dev)))
	goto out;

    twe_free(sc);

    error = 0;
 out:
    splx(s);
    return(error);
}
开发者ID:MarginC,项目名称:kame,代码行数:29,代码来源:twe_freebsd.c


示例11: _inq

static void
_inq(struct cam_sim *sim, union ccb *ccb)
{
     struct ccb_pathinq *cpi = &ccb->cpi;
     isc_session_t *sp = cam_sim_softc(sim);

     debug_called(8);
     debug(3, "sid=%d target=%d lun=%d", sp->sid, ccb->ccb_h.target_id, ccb->ccb_h.target_lun);

     cpi->version_num = 1; /* XXX??? */
     cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE | PI_WIDE_32;
     cpi->target_sprt = 0;
     cpi->hba_misc = 0;
     cpi->hba_eng_cnt = 0;
     cpi->max_target = 0; //ISCSI_MAX_TARGETS - 1;
     cpi->initiator_id = ISCSI_MAX_TARGETS;
     cpi->max_lun = sp->opt.maxluns - 1;
     cpi->bus_id = cam_sim_bus(sim);
     cpi->base_transfer_speed = 3300; // 40000; // XXX:
     strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
     strncpy(cpi->hba_vid, "iSCSI", HBA_IDLEN);
     strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
     cpi->unit_number = cam_sim_unit(sim);
     cpi->ccb_h.status = CAM_REQ_CMP;
#if defined(KNOB_VALID_ADDRESS)
     cpi->transport = XPORT_ISCSI;
     cpi->transport_version = 0;
#endif
}
开发者ID:OpenKod,项目名称:src,代码行数:29,代码来源:isc_cam.c


示例12: _nop_out

/*
 | this is a kludge,
 | the jury is not back with a veredict, user or kernel
 */
static void
_nop_out(isc_session_t *sp)
{
     pduq_t	*pq;
     nop_out_t	*nop_out;

     debug_called(8);

     sdebug(4, "cws=%d", sp->cws);
     if(sp->cws == 0) {
	  /*
	   | only send a nop if window is closed.
	   */
	  if((pq = pdu_alloc(sp->isc, M_NOWAIT)) == NULL)
	       // I guess we ran out of resources
	       return;
	  nop_out = &pq->pdu.ipdu.nop_out;
	  nop_out->opcode = ISCSI_NOP_OUT;
	  nop_out->itt = htonl(sp->sn.itt);
	  nop_out->ttt = -1;
	  nop_out->I = 1;
	  nop_out->F = 1;
	  if(isc_qout(sp, pq) != 0) {
	       sdebug(1, "failed");
	       pdu_free(sp->isc, pq);
	  }
     }
}
开发者ID:ppaeps,项目名称:freebsd-head,代码行数:32,代码来源:isc_sm.c


示例13: ic_scan

static int
ic_scan(isc_session_t *sp)
{
     union ccb	*ccb;

     debug_called(8);
     sdebug(2, "scanning sid=%d", sp->sid);

     sp->flags &= ~ISC_CAMDEVS;
     sp->flags |= ISC_SCANWAIT;

     ccb = xpt_alloc_ccb();
     ccb->ccb_h.path		= sp->cam_path;
     ccb->ccb_h.cbfcnp		= scan_callback;
     ccb->ccb_h.spriv_ptr0	= sp;

     xpt_rescan(ccb);

     while(sp->flags & ISC_SCANWAIT)
	  tsleep(sp, PRIBIO, "ffp", 5*hz); // the timeout time should
					    // be configurable
     sdebug(2, "# of luns=%d", sp->target_nluns);

     if(sp->target_nluns > 0) {
	  sp->flags |= ISC_CAMDEVS;
	  return 0;
     }

     return ENODEV;
}
开发者ID:OpenKod,项目名称:src,代码行数:30,代码来源:isc_cam.c


示例14: chapSHA1

static int
chapSHA1(char id, char *cp, char *chapSecret, unsigned char *digest)
{
     SHA1_CTX	ctx;
     char	*tmp;
     int	len;

     debug_called(3);

     SHA1_Init(&ctx);
     
     SHA1_Update(&ctx, &id, 1);

     if((len = str2bin(chapSecret, &tmp)) == 0) {
	  // print error
	  return -1;
     }
     SHA1_Update(&ctx, tmp, len);
     free(tmp);

     if((len = str2bin(cp, &tmp)) == 0) {
	  // print error
	  return -1;
     }
     SHA1_Update(&ctx, tmp, len);
     free(tmp);

     SHA1_Final(digest, &ctx);

     return 0;
    
}
开发者ID:coyizumi,项目名称:cs111,代码行数:32,代码来源:auth_subr.c


示例15: mlxd_strategy

/*
 * Read/write routine for a buffer.  Finds the proper unit, range checks
 * arguments, and schedules the transfer.  Does not wait for the transfer
 * to complete.  Multi-page transfers are supported.  All I/O requests must
 * be a multiple of a sector in length.
 */
static void
mlxd_strategy(mlx_bio *bp)
{
    struct mlxd_softc	*sc = (struct mlxd_softc *)MLX_BIO_SOFTC(bp);

    debug_called(1);

    /* bogus disk? */
    if (sc == NULL) {
	MLX_BIO_SET_ERROR(bp, EINVAL);
	goto bad;
    }

    /* XXX may only be temporarily offline - sleep? */
    if (sc->mlxd_drive->ms_state == MLX_SYSD_OFFLINE) {
	MLX_BIO_SET_ERROR(bp, ENXIO);
	goto bad;
    }

    MLX_BIO_STATS_START(bp);
    mlx_submit_buf(sc->mlxd_controller, bp);
    return;

 bad:
    /*
     * Correctly set the bio to indicate a failed tranfer.
     */
    MLX_BIO_RESID(bp) = MLX_BIO_LENGTH(bp);
    MLX_BIO_DONE(bp);
    return;
}
开发者ID:syedzubairahmed,项目名称:FreeBSD-7.3-dyntick,代码行数:37,代码来源:mlx_disk.c


示例16: _reject

static void
_reject(isc_session_t *sp, pduq_t *pq)
{
     pduq_t	*opq;
     pdu_t	*pdu;
     reject_t	*reject;
     int	itt;

     debug_called(8);
     pdu = mtod(pq->mp, pdu_t *);
     itt = pdu->ipdu.bhs.itt;
     reject = &pq->pdu.ipdu.reject;
     sdebug(2, "itt=%x reason=0x%x", ntohl(itt), reject->reason);
     opq = i_search_hld(sp, itt, 0);
     if(opq != NULL)
	  iscsi_reject(sp, opq, pq);
     else {
	  switch(pq->pdu.ipdu.bhs.opcode) {
	  case ISCSI_LOGOUT_CMD: // XXX: wasabi does this - can't figure out why
	       sdebug(2, "ISCSI_LOGOUT_CMD ...");
	       break;
	  default:
	       xdebug("%d] we lost something itt=%x",
		      sp->sid, ntohl(pq->pdu.ipdu.bhs.itt));
	  }
     }
     pdu_free(sp->isc, pq);
}
开发者ID:ppaeps,项目名称:freebsd-head,代码行数:28,代码来源:isc_sm.c


示例17: doLogin

static trans_t
doLogin(isess_t *sess)
{
     isc_opt_t	*op = sess->op;
     int	status, count;

     debug_called(3);

     if(op->chapSecret == NULL && op->tgtChapSecret == NULL)
	  /*
	   | don't need any security negotiation
	   | or in other words: we don't have any secrets to exchange
	   */
	  sess->csg = LON_PHASE;
     else
	  sess->csg = SN_PHASE;

     if(sess->tsih) {
	  sess->tsih = 0;	// XXX: no 'reconnect' yet
	  sess->flags &= ~SESS_NEGODONE; // XXX: KLUDGE
     }
     count = 10; // should be more than enough
     do {
	  debug(3, "count=%d csg=%d", count, sess->csg);
	  status = loginPhase(sess);
	  if(count-- == 0)
	       // just in case we get into a loop
	       status = -1;
     } while(status == 0 && (sess->csg != FF_PHASE));

     sess->flags &= ~SESS_INITIALLOGIN;
     debug(3, "status=%d", status);

     switch(status) {
     case 0: // all is ok ...
	  sess->flags |= SESS_LOGGEDIN;
	  if(strcmp(sess->op->sessionType, "Discovery") == 0)
	       doDiscovery(sess);
	  return T5;

     case 1:	// redirect - temporary/permanent
	  /*
	   | start from scratch?
	   */
	  sess->flags &= ~SESS_NEGODONE;
	  sess->flags |= (SESS_REDIRECT | SESS_INITIALLOGIN1);
	  syslog(LOG_DEBUG, "target sent REDIRECT");
	  return T7;

     case 2: // initiator terminal error
	  return 0;
     case 3: // target terminal error -- could retry ...
	  sleep(5);
	  return T7; // lets try
     default:
	  return 0;
     }
}
开发者ID:2asoft,项目名称:freebsd,代码行数:58,代码来源:fsm.c


示例18: mly_cam_poll

/********************************************************************************
 * Check for possibly-completed commands.
 */
static void
mly_cam_poll(struct cam_sim *sim)
{
    struct mly_softc	*sc = cam_sim_softc(sim);

    debug_called(2);

    mly_done(sc);
}
开发者ID:UnitedMarsupials,项目名称:kame,代码行数:12,代码来源:mly_cam.c


示例19: mlxd_probe

static int
mlxd_probe(device_t dev)
{

    debug_called(1);

    device_set_desc(dev, "Mylex System Drive");
    return (0);
}
开发者ID:cyrilmagsuci,项目名称:freebsd,代码行数:9,代码来源:mlx_disk.c


示例20: _async

static void
_async(isc_session_t *sp, pduq_t *pq)
{
     debug_called(8);

     iscsi_async(sp, pq);

     pdu_free(sp->isc, pq);
}
开发者ID:ppaeps,项目名称:freebsd-head,代码行数:9,代码来源:isc_sm.c



注:本文中的debug_called函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ debug_check_no_locks_freed函数代码示例发布时间:2022-05-30
下一篇:
C++ debug_activate函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap