void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
	
#ifdef CONFIG_FUTEX
	if (unlikely(tsk->robust_list)) {
		exit_robust_list(tsk);
		tsk->robust_list = NULL;
	}
#ifdef CONFIG_COMPAT
	if (unlikely(tsk->compat_robust_list)) {
		compat_exit_robust_list(tsk);
		tsk->compat_robust_list = NULL;
	}
#endif
	if (unlikely(!list_empty(&tsk->pi_state_list)))
		exit_pi_state_list(tsk);
#endif

	
	deactivate_mm(tsk, mm);

	if (tsk->vfork_done)
		complete_vfork_done(tsk);

	if (tsk->clear_child_tid) {
		if (!(tsk->flags & PF_SIGNALED) &&
		    atomic_read(&mm->mm_users) > 1) {
			put_user(0, tsk->clear_child_tid);
			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
					1, NULL, NULL, 0);
		}
		tsk->clear_child_tid = NULL;
	}
}

/* Please note the differences between mmput and mm_release.
 * mmput is called whenever we stop holding onto a mm_struct,
 * error success whatever.
 *
 * mm_release is called after a mm_struct has been removed
 * from the current process.
 *
 * This difference is important for error handling, when we
 * only half set up a mm_struct for a new process and need to restore
 * the old one.  Because we mmput the new mm_struct before
 * restoring the old one. . .
 * Eric Biederman 10 January 1998
 */
void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
	/* Get rid of any futexes when releasing the mm */
#ifdef CONFIG_FUTEX
	if (unlikely(tsk->robust_list)) {
		exit_robust_list(tsk);
		tsk->robust_list = NULL;
	}
#ifdef CONFIG_COMPAT
	if (unlikely(tsk->compat_robust_list)) {
		compat_exit_robust_list(tsk);
		tsk->compat_robust_list = NULL;
	}
#endif
	if (unlikely(!list_empty(&tsk->pi_state_list)))
		exit_pi_state_list(tsk);
#endif

	uprobe_free_utask(tsk);

	/* Get rid of any cached register state */
	deactivate_mm(tsk, mm);

	/*
	 * If we're exiting normally, clear a user-space tid field if
	 * requested.  We leave this alone when dying by signal, to leave
	 * the value intact in a core dump, and to save the unnecessary
	 * trouble, say, a killed vfork parent shouldn't touch this mm.
	 * Userland only wants this done for a sys_exit.
	 */
	if (tsk->clear_child_tid) {
		if (!(tsk->flags & PF_SIGNALED) &&
		    atomic_read(&mm->mm_users) > 1) {

			struct syscall_result* psr; /* REPLAY */
			if (current->record_thrd) new_syscall_enter_external (TID_WAKE_CALL);                                /* REPLAY */
			else if (current->replay_thrd) get_next_syscall_enter_external (TID_WAKE_CALL, NULL, &psr);          /* REPLAY */

			/*
			 * We don't check the error code - if userspace has
			 * not set up a proper pointer then tough luck.
			 */
			put_user(0, tsk->clear_child_tid);
			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
					1, NULL, NULL, 0);

			if (current->record_thrd) new_syscall_exit_external (TID_WAKE_CALL, 0, NULL);  /* REPLAY */
			else if (current->replay_thrd && psr) get_next_syscall_exit_external (psr);    /* REPLAY */
		}
		tsk->clear_child_tid = NULL;
	}

	/*
	 * All done, finally we can wake up parent and return this mm to him.
	 * Also kthread_stop() uses this completion for synchronization.
	 */
	if (tsk->vfork_done)
		complete_vfork_done(tsk);
}

/* Please note the differences between mmput and mm_release.
 * mmput is called whenever we stop holding onto a mm_struct,
 * error success whatever.
 *
 * mm_release is called after a mm_struct has been removed
 * from the current process.
 *
 * This difference is important for error handling, when we
 * only half set up a mm_struct for a new process and need to restore
 * the old one.  Because we mmput the new mm_struct before
 * restoring the old one. . .
 * Eric Biederman 10 January 1998
 */
void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
	/* Get rid of any futexes when releasing the mm */
#ifdef CONFIG_FUTEX
	if (unlikely(tsk->robust_list)) {
		exit_robust_list(tsk);
		tsk->robust_list = NULL;
	}
#ifdef CONFIG_COMPAT
	if (unlikely(tsk->compat_robust_list)) {
		compat_exit_robust_list(tsk);
		tsk->compat_robust_list = NULL;
	}
#endif
	if (unlikely(!list_empty(&tsk->pi_state_list)))
		exit_pi_state_list(tsk);
#endif

	uprobe_free_utask(tsk);

	/* Get rid of any cached register state */
	deactivate_mm(tsk, mm);

	if (tsk->vfork_done)
		complete_vfork_done(tsk);

	/*
	 * If we're exiting normally, clear a user-space tid field if
	 * requested.  We leave this alone when dying by signal, to leave
	 * the value intact in a core dump, and to save the unnecessary
	 * trouble, say, a killed vfork parent shouldn't touch this mm.
	 * Userland only wants this done for a sys_exit.
	 */
	if (tsk->clear_child_tid) {
		if (!(tsk->flags & PF_SIGNALED) &&
		    atomic_read(&mm->mm_users) > 1) {
			/*
			 * We don't check the error code - if userspace has
			 * not set up a proper pointer then tough luck.
			 */
			put_user(0, tsk->clear_child_tid);
			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
					1, NULL, NULL, 0);
		}
		tsk->clear_child_tid = NULL;
	}
}

/* Please note the differences between mmput and mm_release.
 * mmput is called whenever we stop holding onto a mm_struct,
 * error success whatever.
 *
 * mm_release is called after a mm_struct has been removed
 * from the current process.
 *
 * This difference is important for error handling, when we
 * only half set up a mm_struct for a new process and need to restore
 * the old one.  Because we mmput the new mm_struct before
 * restoring the old one. . .
 * Eric Biederman 10 January 1998
 */
void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
	struct completion *vfork_done = tsk->vfork_done;

	/* Get rid of any cached register state */
	deactivate_mm(tsk, mm);

	/* notify parent sleeping on vfork() */
	if (vfork_done) {
		tsk->vfork_done = NULL;
		complete(vfork_done);
	}
	if (tsk->clear_child_tid && atomic_read(&mm->mm_users) > 1) {
		u32 __user * tidptr = tsk->clear_child_tid;
		tsk->clear_child_tid = NULL;

		/*
		 * We don't check the error code - if userspace has
		 * not set up a proper pointer then tough luck.
		 */
		put_user(0, tidptr);
		sys_futex(tidptr, FUTEX_WAKE, 1, NULL, NULL, 0);
	}
}