• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ dbus_g_proxy_begin_call函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中dbus_g_proxy_begin_call函数的典型用法代码示例。如果您正苦于以下问题：C++ dbus_g_proxy_begin_call函数的具体用法？C++ dbus_g_proxy_begin_call怎么用？C++ dbus_g_proxy_begin_call使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了dbus_g_proxy_begin_call函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cdma_poll_cb

static gboolean
cdma_poll_cb (gpointer user_data)
{
	CdmaDeviceInfo *info = user_data;

	/* Kick off calls to get registration state and signal quality */
	if (!info->skip_reg_poll) {
		dbus_g_proxy_begin_call (info->cdma_proxy, "GetRegistrationState",
		                         reg_state_reply, info, NULL,
		                         G_TYPE_INVALID);
		info->skip_reg_poll = FALSE;
	}

	if (!info->skip_signal_poll) {
		dbus_g_proxy_begin_call (info->cdma_proxy, "GetSignalQuality",
		                         signal_reply, info, NULL,
		                         G_TYPE_INVALID);
		info->skip_signal_poll = FALSE;
	}

	dbus_g_proxy_begin_call (info->cdma_proxy, "GetServingSystem",
	                         serving_system_reply, info, NULL,
	                         G_TYPE_INVALID);

	return TRUE;  /* keep running until we're told to stop */
}
开发者ID:Jubei-Mitsuyoshi，项目名称:aaa-network-manager-applet，代码行数:26，代码来源:applet-device-cdma.c


示例2: set_ap_scan_cb

static void
set_ap_scan_cb (DBusGProxy *proxy, DBusGProxyCall *call_id, gpointer user_data)
{
	NMSupplicantInfo *info = (NMSupplicantInfo *) user_data;
	NMSupplicantInterfacePrivate *priv = NM_SUPPLICANT_INTERFACE_GET_PRIVATE (info->interface);
	GError *err = NULL;
	DBusGProxyCall *call;
	GHashTable *config_hash;

	if (!dbus_g_proxy_end_call (proxy, call_id, &err, G_TYPE_INVALID)) {
		nm_log_warn (LOGD_SUPPLICANT, "Couldn't send AP scan mode to the supplicant interface: %s.",
		             err->message);
		emit_error_helper (info->interface, err);
		g_error_free (err);
		return;
	}

	nm_log_info (LOGD_SUPPLICANT, "Config: set interface ap_scan to %d",
	             nm_supplicant_config_get_ap_scan (priv->cfg));

	info = nm_supplicant_info_new (info->interface, priv->iface_proxy, info->store);
	config_hash = nm_supplicant_config_get_hash (priv->cfg);
	call = dbus_g_proxy_begin_call (priv->iface_proxy, "AddNetwork",
	                                add_network_cb,
	                                info,
	                                nm_supplicant_info_destroy,
	                                DBUS_TYPE_G_MAP_OF_VARIANT, config_hash,
	                                G_TYPE_INVALID);
	g_hash_table_destroy (config_hash);
	nm_supplicant_info_set_call (info, call);
}
开发者ID:alfmatos，项目名称:NetworkManager，代码行数:31，代码来源:nm-supplicant-interface.c


示例3: request_bss_properties

static void
request_bss_properties (NMSupplicantInterface *self,
                        GPtrArray *paths)
{
	NMSupplicantInterfacePrivate *priv = NM_SUPPLICANT_INTERFACE_GET_PRIVATE (self);
	int i;

	/* Fire off a "properties" call for each returned BSSID */
	for (i = 0; i < paths->len; i++) {
		NMSupplicantInfo *info;
		DBusGProxy *proxy;
		DBusGProxyCall *call;

		proxy = dbus_g_proxy_new_for_name (nm_dbus_manager_get_connection (priv->dbus_mgr),
			                               WPAS_DBUS_SERVICE,
			                               g_ptr_array_index (paths, i),
			                               DBUS_INTERFACE_PROPERTIES);
		info = nm_supplicant_info_new (self, proxy, priv->other_pcalls);
		call = dbus_g_proxy_begin_call (proxy, "GetAll",
			                            bssid_properties_cb,
			                            info,
			                            nm_supplicant_info_destroy,
			                            G_TYPE_STRING, WPAS_DBUS_IFACE_BSS,
			                            G_TYPE_INVALID);
		nm_supplicant_info_set_call (info, call);
		g_object_unref (proxy);
	}
}
开发者ID:alfmatos，项目名称:NetworkManager，代码行数:28，代码来源:nm-supplicant-interface.c


示例4: nm_supplicant_interface_request_scan

gboolean
nm_supplicant_interface_request_scan (NMSupplicantInterface * self)
{
	NMSupplicantInterfacePrivate *priv;
	NMSupplicantInfo *info;
	DBusGProxyCall *call;
	GHashTable *hash;

	g_return_val_if_fail (NM_IS_SUPPLICANT_INTERFACE (self), FALSE);

	priv = NM_SUPPLICANT_INTERFACE_GET_PRIVATE (self);

	/* Scan parameters */
	hash = g_hash_table_new_full (g_str_hash, g_str_equal, NULL, destroy_gvalue);
	g_hash_table_insert (hash, "Type", string_to_gvalue ("active"));

	info = nm_supplicant_info_new (self, priv->iface_proxy, priv->other_pcalls);
	call = dbus_g_proxy_begin_call (priv->iface_proxy, "Scan",
	                                scan_request_cb,
	                                info,
	                                nm_supplicant_info_destroy,
	                                DBUS_TYPE_G_MAP_OF_VARIANT, hash,
	                                G_TYPE_INVALID);
	g_hash_table_destroy (hash);
	nm_supplicant_info_set_call (info, call);

	return call != NULL;
}
开发者ID:alfmatos，项目名称:NetworkManager，代码行数:28，代码来源:nm-supplicant-interface.c


示例5: nm_device_wifi_request_scan_simple

/**
 * nm_device_wifi_request_scan_simple:
 * @device: a #NMDeviceWifi
 * @callback: (scope async) (allow-none): the function to call when the call is done
 * @user_data: (closure): user data to pass to the callback function
 *
 * Request NM to scan for access points on the #NMDeviceWifi. This function only
 * instructs NM to perform scanning. Use nm_device_wifi_get_access_points()
 * to get available access points.
 **/
void
nm_device_wifi_request_scan_simple (NMDeviceWifi *device,
                                    NMDeviceWifiRequestScanFn callback,
                                    gpointer user_data)
{
	RequestScanInfo *info;
	GHashTable *options;
	NMDeviceWifiPrivate *priv = NM_DEVICE_WIFI_GET_PRIVATE (device);

	g_return_if_fail (NM_IS_DEVICE_WIFI (device));

	/* If a scan is in progress, just return */
	if (priv->scan_call)
		return;

	options = g_hash_table_new (g_str_hash, g_str_equal);

	info = g_slice_new0 (RequestScanInfo);
	info->device = device;
	info->callback = callback;
	info->user_data = user_data;

	priv->scan_info = info;
	priv->scan_call = dbus_g_proxy_begin_call (NM_DEVICE_WIFI_GET_PRIVATE (device)->proxy, "RequestScan",
	                                           request_scan_cb, info, NULL,
	                                           DBUS_TYPE_G_MAP_OF_VARIANT, options,
	                                           G_TYPE_INVALID);

	g_hash_table_unref (options);
}
开发者ID:cyphermox，项目名称:NetworkManager，代码行数:40，代码来源:nm-device-wifi.c


示例6: add_device_from_path

static void
add_device_from_path (char                *device_path,
                      GUPnPNetworkManager *manager)
{
        NMDevice *nm_device;

        nm_device = nm_device_new (manager, device_path);

        manager->priv->nm_devices = g_list_append (manager->priv->nm_devices,
                                                   nm_device);

        dbus_g_proxy_add_signal (nm_device->device_proxy,
                                 "StateChanged",
                                 G_TYPE_UINT,
                                 G_TYPE_UINT,
                                 G_TYPE_UINT,
                                 G_TYPE_INVALID);

        dbus_g_proxy_connect_signal (nm_device->device_proxy,
                                     "StateChanged",
                                     G_CALLBACK (on_device_state_changed),
                                     nm_device,
                                     NULL);

        dbus_g_proxy_begin_call (nm_device->prop_proxy,
                                 "Get",
                                 get_device_state_cb,
                                 nm_device,
                                 NULL,
                                 G_TYPE_STRING, DEVICE_INTERFACE,
                                 G_TYPE_STRING, "State",
                                 G_TYPE_INVALID);
}
开发者ID:lovebug356，项目名称:gupnp，代码行数:33，代码来源:gupnp-network-manager.c


示例7: method_call

static void method_call(DBusGProxy *proxy, const char *method, const char *path)
{
	if (proxy == NULL)
		return;

	g_print("%s ( %s, %s )\n", method, dbus_g_proxy_get_path(proxy), path);

	if (path == NULL) {
		if (dbus_g_proxy_begin_call_with_timeout(proxy,
					method, method_callback, NULL, NULL,
					120 * 1000, G_TYPE_INVALID) == FALSE) {
			g_print("Can't call method %s\n", method);
			g_object_unref(proxy);
			return;
		}
	} else {
		if (dbus_g_proxy_begin_call(proxy, method, method_callback,
				NULL, NULL, DBUS_TYPE_G_OBJECT_PATH, path,
						G_TYPE_INVALID) == FALSE) {
			g_print("Can't call method %s (%s)\n", method, path);
			g_object_unref(proxy);
			return;
		}
	}
}
开发者ID:abarsode，项目名称:connman-gnome，代码行数:25，代码来源:test-client.c


示例8: names_model_reload

static void
names_model_reload (NamesModel *names_model)
{
  GtkListStore *list_store;

  list_store = GTK_LIST_STORE (names_model);

  if (names_model->pending_list_names)
    {
      dbus_g_proxy_cancel_call (names_model->driver_proxy,
				names_model->pending_list_names);
      names_model->pending_list_names = NULL;
    }
  
  gtk_list_store_clear (list_store);
  
  if (names_model->connection == NULL)
    return;
  
  names_model->pending_list_names =
    dbus_g_proxy_begin_call (names_model->driver_proxy,
                             "ListNames",
			     have_names_notify, names_model, NULL,
                             G_TYPE_INVALID);
}
开发者ID:freedesktop-unofficial-mirror，项目名称:dbus__dbus-qt3，代码行数:25，代码来源:dbus-names-model.c


示例9: modem_manager_appeared

static void
modem_manager_appeared (NMModemManager *self, gboolean enumerate_devices)
{
	NMModemManagerPrivate *priv = NM_MODEM_MANAGER_GET_PRIVATE (self);

	if (priv->poke_id) {
		g_source_remove (priv->poke_id);
		priv->poke_id = 0;
	}

	nm_log_info (LOGD_MB, "modem-manager is now available");

	priv->proxy = dbus_g_proxy_new_for_name (nm_dbus_manager_get_connection (priv->dbus_mgr),
											 MM_DBUS_SERVICE, MM_DBUS_PATH, MM_DBUS_INTERFACE);

	dbus_g_proxy_add_signal (priv->proxy, "DeviceAdded", DBUS_TYPE_G_OBJECT_PATH, G_TYPE_INVALID);
	dbus_g_proxy_connect_signal (priv->proxy, "DeviceAdded",
								 G_CALLBACK (modem_added), self,
								 NULL);

	dbus_g_proxy_add_signal (priv->proxy, "DeviceRemoved", DBUS_TYPE_G_OBJECT_PATH, G_TYPE_INVALID);
	dbus_g_proxy_connect_signal (priv->proxy, "DeviceRemoved",
								 G_CALLBACK (modem_removed), self,
								 NULL);

	if (enumerate_devices)
		dbus_g_proxy_begin_call (priv->proxy, "EnumerateDevices", enumerate_devices_done, self, NULL, G_TYPE_INVALID);
}
开发者ID:alfmatos，项目名称:NetworkManager，代码行数:28，代码来源:nm-modem-manager.c


示例10: size_allocate

void size_allocate(GtkWidget     *widget,
                   GtkAllocation *allocation,
                   gpointer       user_data)
{
  static int prev_width = -1;
  static int prev_height = -1;

  if (prev_height == -1 || prev_width == -1 ||
      allocation->width != prev_width ||
      allocation->height != prev_height)
    {
      prev_height = allocation->height;
      prev_width = allocation->width;

      if (g_applet->orientation == 1 ||
          g_applet->orientation == 3)
        {
          g_applet->size = allocation->width;
        }
      else
        {
          g_applet->size = allocation->height;
        }

      if (g_applet->support != NULL && workrave_is_running())
        {
          dbus_g_proxy_begin_call(g_applet->support, "SetSize", dbus_callback, NULL, NULL,
                                  G_TYPE_UINT, g_applet->size,
                                  G_TYPE_INVALID);
      
        }
    }
}
开发者ID:jonolumb，项目名称:workrave，代码行数:33，代码来源:WorkraveApplet.c


示例11: main

int main(int argc, char *argv[])
{
    GError *error = NULL;
    DBusGConnection *connection;
    DBusGProxy *proxy;

    g_type_init();
    main_loop = g_main_loop_new(NULL, TRUE);

    connection = dbus_g_bus_get(DBUS_BUS_SESSION, &error);
    if (connection == NULL) {
        g_printerr("Failed to open connection to bus: %s\n", error->message);
        g_error_free(error);
        error = NULL;
        exit(1);
    }

    proxy = dbus_g_proxy_new_for_name(connection, "org.freedesktop.Notifications",
                                      "/",
                                      DBUS_INTERFACE_INTROSPECTABLE);

    dbus_g_proxy_begin_call(proxy, "Introspect", my_callback_func, NULL, NULL,
                            G_TYPE_INVALID);
    g_main_loop_run(main_loop);

    return 0;
}
开发者ID:Airead，项目名称:excise，代码行数:27，代码来源:asynsendm.c


示例12: on_device_state_changed

static void
on_device_state_changed (DBusGProxy *proxy,
                         guint       new_state,
                         guint       old_state,
                         guint       reason,
                         void       *user_data)
{
        NMDevice *nm_device;

        nm_device = (NMDevice *) user_data;

        if (new_state == NM_DEVICE_STATE_ACTIVATED) {
                dbus_g_proxy_begin_call (nm_device->prop_proxy,
                                         "Get",
                                         get_device_interface_cb,
                                         nm_device,
                                         NULL,
                                         G_TYPE_STRING, DEVICE_INTERFACE,
                                         G_TYPE_STRING, "Interface",
                                         G_TYPE_INVALID);
        } else if (nm_device->context != NULL) {
                /* For all other states we just destroy the context */
                g_signal_emit_by_name (nm_device->manager,
                                       "context-unavailable",
                                       nm_device->context);

                g_object_unref (nm_device->context);
                nm_device->context = NULL;
        }
}
开发者ID:lovebug356，项目名称:gupnp，代码行数:30，代码来源:gupnp-network-manager.c


示例13: modem_added

static void
modem_added (DBusGProxy *proxy, const char *path, gpointer user_data)
{
	NmaBtDevice *self = NMA_BT_DEVICE (user_data);
	NmaBtDevicePrivate *priv = NMA_BT_DEVICE_GET_PRIVATE (self);
	DBusGProxy *props_proxy;

	g_return_if_fail (path != NULL);

	g_message ("%s: (%s) modem found", __func__, path);

	/* Create a proxy for the modem and get its properties */
	props_proxy = dbus_g_proxy_new_for_name (priv->bus,
	                                         MM_SERVICE,
	                                         path,
	                                         "org.freedesktop.DBus.Properties");
	g_assert (proxy);
	priv->modem_proxies = g_slist_append (priv->modem_proxies, props_proxy);

	g_message ("%s: (%s) calling GetAll...", __func__, path);

	dbus_g_proxy_begin_call (props_proxy, "GetAll",
	                         modem_get_all_cb,
	                         self,
	                         NULL,
	                         G_TYPE_STRING, MM_MODEM_INTERFACE,
	                         G_TYPE_INVALID);
}
开发者ID:fatman2021，项目名称:network-manager-applet，代码行数:28，代码来源:nma-bt-device.c


示例14: get_device_state_cb

static void
get_device_state_cb (DBusGProxy     *proxy,
                     DBusGProxyCall *call,
                     void           *user_data)
{
        GValue value = {0,};
        GError *error = NULL;
        NMDevice *nm_device = (NMDevice *) user_data;

        if (!dbus_g_proxy_end_call (proxy,
                                    call,
                                    &error,
                                    G_TYPE_VALUE, &value,
                                    G_TYPE_INVALID)) {
                g_warning ("Error reading property: %s\n", error->message);

                g_error_free (error);
                return;
        }

        NMDeviceState state = g_value_get_uint (&value);

        if (state == NM_DEVICE_STATE_ACTIVATED) {
                dbus_g_proxy_begin_call (nm_device->prop_proxy,
                                         "Get",
                                         get_device_interface_cb,
                                         nm_device,
                                         NULL,
                                         G_TYPE_STRING, DEVICE_INTERFACE,
                                         G_TYPE_STRING, "Interface",
                                         G_TYPE_INVALID);
        }

        g_value_unset (&value);
}
开发者ID:lovebug356，项目名称:gupnp，代码行数:35，代码来源:gupnp-network-manager.c


示例15: nm_secret_agent_cancel_secrets

void
nm_secret_agent_cancel_secrets (NMSecretAgent *self, gconstpointer call)
{
	NMSecretAgentPrivate *priv;
	Request *r;

	g_return_if_fail (self != NULL);
	priv = NM_SECRET_AGENT_GET_PRIVATE (self);
	g_return_if_fail (priv->proxy != NULL);

	r = g_hash_table_lookup (priv->requests, call);
	g_return_if_fail (r != NULL);

	dbus_g_proxy_cancel_call (priv->proxy, (gpointer) call);

	dbus_g_proxy_begin_call (priv->proxy,
	                         "CancelGetSecrets",
	                         cancel_done,
	                         g_strdup (nm_secret_agent_get_description (self)),
	                         g_free,
	                         DBUS_TYPE_G_OBJECT_PATH, r->path,
	                         G_TYPE_STRING, r->setting_name,
	                         G_TYPE_INVALID);
	g_hash_table_remove (priv->requests, call);
}
开发者ID:freedesktop-unofficial-mirror，项目名称:NetworkManager__NetworkManager，代码行数:25，代码来源:nm-secret-agent.c


示例16: loc_props_cb

static void
loc_props_cb (DBusGProxy *proxy, DBusGProxyCall *call, gpointer user_data)
{
	GError *error = NULL;
	GHashTable *props = NULL;
	Modem *modem = user_data;

	if (!dbus_g_proxy_end_call (proxy, call, &error,
	                            DBUS_TYPE_G_MAP_OF_VARIANT, &props,
	                            G_TYPE_INVALID)) {
		g_warning ("%s: failed to get location interface properties: (%d) %s",
		           __func__,
		           error ? error->code : -1,
		           error && error->message ? error->message : "(unknown)");
		g_clear_error (&error);
		return;
	}

	modem_properties_changed (modem->loc_proxy, MM_DBUS_LOC_INTERFACE, props, modem);
	g_hash_table_destroy (props);

	/* Now that we know the device supports location services, get basic
	 * modem properties and start grabbing location info.
	 */
	dbus_g_proxy_begin_call (modem->props_proxy, "GetAll",
	                         modem_props_cb, modem, NULL,
	                         G_TYPE_STRING, MM_DBUS_MODEM_INTERFACE, G_TYPE_INVALID);
}
开发者ID:Aktrisa，项目名称:geoclue，代码行数:28，代码来源:geoclue-gsmloc-mm.c


示例17: online_init

static gboolean
online_init (void)
{
  DBusGConnection *conn;

  if (proxy)
    return TRUE;

  conn = dbus_g_bus_get (DBUS_BUS_SYSTEM, NULL);
  if (!conn) {
    g_warning ("Cannot get connection to system message bus");
    return FALSE;
  }

  proxy = dbus_g_proxy_new_for_name (conn,
                                     "net.connman",
                                     "/",
                                     "net.connman.Manager");

  dbus_g_object_register_marshaller (g_cclosure_marshal_VOID__STRING,
                                     G_TYPE_NONE, G_TYPE_STRING,
				     G_TYPE_INVALID);
  dbus_g_proxy_add_signal (proxy, "StateChanged", G_TYPE_STRING, NULL);
  dbus_g_proxy_connect_signal (proxy, "StateChanged",
                               (GCallback)state_changed, NULL, NULL);

  current_state = FALSE;

  /* Get the current state */
  dbus_g_proxy_begin_call (proxy, "GetState", got_state_cb,
                           NULL, NULL, G_TYPE_INVALID);

  return TRUE;
}
开发者ID:dudochkin-victor，项目名称:gogoo-panel-people，代码行数:34，代码来源:sw-online.c


示例18: inhibit

static gboolean
inhibit (RBGPMPlugin *plugin)
{
	GtkWindow *window;
	plugin->timeout_id = 0;
	gulong xid = 0;

	if (plugin->cookie != 0) {
		rb_debug ("Was going to inhibit gnome-session, but we already have done");
		return FALSE;
	}

	if (create_dbus_proxy (plugin) == FALSE) {
		return FALSE;
	}

	rb_debug ("inhibiting");
	g_object_ref (plugin);
	g_object_get (plugin->shell, "window", &window, NULL);
	xid = GDK_WINDOW_XWINDOW (gtk_widget_get_window (GTK_WIDGET (window)));
	dbus_g_proxy_begin_call (plugin->proxy, "Inhibit",
				 (DBusGProxyCallNotify) inhibit_cb,
				 plugin,
				 NULL,
				 G_TYPE_STRING, "rhythmbox",
				 G_TYPE_UINT, xid,
				 G_TYPE_STRING, _("Playing"),
				 G_TYPE_UINT, 8, /* flags */
				 G_TYPE_INVALID);

	return FALSE;
}
开发者ID:AdamZ，项目名称:rhythmbox-magnatune，代码行数:32，代码来源:rb-power-manager-plugin.c


示例19: nm_remote_settings_save_hostname

/**
 * nm_remote_settings_save_hostname:
 * @settings: the %NMRemoteSettings
 * @hostname: the new persistent hostname to set, or NULL to clear any existing
 *  persistent hostname
 * @callback: (scope async): callback to be called when the hostname operation completes
 * @user_data: caller-specific data passed to @callback
 *
 * Requests that the machine's persistent hostname be set to the specified value
 * or cleared.
 *
 * Returns: TRUE if the request was successful, FALSE if it failed
 **/
gboolean
nm_remote_settings_save_hostname (NMRemoteSettings *settings,
                                  const char *hostname,
                                  NMRemoteSettingsSaveHostnameFunc callback,
                                  gpointer user_data)
{
	NMRemoteSettingsPrivate *priv;
	SaveHostnameInfo *info;

	g_return_val_if_fail (settings != NULL, FALSE);
	g_return_val_if_fail (NM_IS_REMOTE_SETTINGS (settings), FALSE);
	g_return_val_if_fail (hostname != NULL, FALSE);
	g_return_val_if_fail (callback != NULL, FALSE);
	
	priv = NM_REMOTE_SETTINGS_GET_PRIVATE (settings);

	info = g_malloc0 (sizeof (SaveHostnameInfo));
	info->settings = settings;
	info->callback = callback;
	info->callback_data = user_data;

	dbus_g_proxy_begin_call (priv->proxy, "SaveHostname",
	                         save_hostname_cb,
	                         info,
	                         g_free,
	                         G_TYPE_STRING, hostname ? hostname : "",
	                         G_TYPE_INVALID);
	return TRUE;
}
开发者ID:alfmatos，项目名称:NetworkManager，代码行数:42，代码来源:nm-remote-settings.c


示例20: showlog_callback

static void
showlog_callback(BonoboUIComponent *ui, const char *path, Bonobo_UIComponent_EventType type,
                 const char *state, gpointer user_data)
{
  gboolean new_state;

  if (state == NULL || strcmp(state, "") == 0)
    {
      /* State goes blank when component is removed; ignore this. */
      return;
    }

  new_state = strcmp(state, "0") != 0;

  if (1)
    {
      g_applet->last_showlog_state = new_state;

      if (g_applet->ui != NULL && workrave_is_running())
        {
          dbus_g_proxy_begin_call(g_applet->ui, "NetworkLog", dbus_callback, NULL, NULL,
                                 G_TYPE_BOOLEAN, new_state, G_TYPE_INVALID);
        }
    }
}
开发者ID:jonolumb，项目名称:workrave，代码行数:25，代码来源:WorkraveApplet.c



注：本文中的dbus_g_proxy_begin_call函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ dbus_g_proxy_connect_signal函数代码示例发布时间：2022-05-30
下一篇：
C++ dbus_g_proxy_add_signal函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap