C++ ctimer_init函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ctimer_init函数的典型用法代码示例。如果您正苦于以下问题：C++ ctimer_init函数的具体用法？C++ ctimer_init怎么用？C++ ctimer_init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ctimer_init函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int
main()
{
  configure_mcu_clocks();
  uart_init(115200);
  printf("Platform init complete, starting contiki init\n");

  clock_init();
  rtimer_init();
  leds_init();
  process_init();
#if WITH_SERIAL_LINE_INPUT
  uart_set_input(serial_line_input_byte);
  serial_line_init();
#endif
  process_start(&etimer_process, NULL);
  ctimer_init();
  autostart_start(autostart_processes);
  while(1) {
    do {
	// meant to do some sleeping here, if we want to save power...
	//
    } while(process_run() > 0);
  }
  return 0;
}

开发者ID:frtos-wpan，项目名称:contiki-outoftree，代码行数:26，代码来源:contiki-main.c

示例2: ule6loGI_init

ule6lo_status_t ule6loGI_init(const ule6lo_IPEI_t *IPEIAddr) {
	process_init();
	process_start(&etimer_process, NULL);
	ctimer_init();
	rtimer_init();
	set_rime_addr();
	//queuebuf_init();
	netstack_init();


	printf("Size of uip_ipeiaddr.addr = %i\n", (int)(sizeof(uip_ipeiaddr.addr)));
	if( IPEIAddr != NULL){
	    printf("Size of uip_ipeiaddr.addr = %i\n", (int)(sizeof(uip_ipeiaddr.addr)));
	    uip_ipeiaddr.addr[0] = 0x00;
	    memcpy(&uip_ipeiaddr.addr[1], IPEIAddr, sizeof(ule6lo_IPEI_t));
	}
#if ! FILTERED_BORDER_ROUTER
	process_start(&tcpip_process, NULL);
#endif

	autostart_start(autostart_processes);

	stack_status = STATUS_SUCCESS;
	return stack_status;
}

开发者ID:ULE-Alliance，项目名称:ULE_6LowPan，代码行数:25，代码来源:ule6loGI_6LBR.c

示例3: main

int
main(void)
{
  cpu_init();
  /* Initialize UART connected to Galileo Gen2 FTDI header */
  quarkX1000_uart_init(QUARK_X1000_UART_1);
  clock_init();
  rtimer_init();

  printf("Starting Contiki\n");

  ENABLE_IRQ();

  process_init();
  procinit_init();
  ctimer_init();
  autostart_start(autostart_processes);

  eth_init();

  while(1) {
    process_run();
  }

  return 0;
}

开发者ID:Babody，项目名称:contiki，代码行数:26，代码来源:contiki-main.c

示例4: main

/*---------------------------------------------------------------------------*/
int
main(void)
{
  printf("Starting Contiki\n");
  process_init();
  ctimer_init();

  netstack_init();
  
  procinit_init();

  serial_line_init();
  
  autostart_start(autostart_processes);

  
  /* Make standard output unbuffered. */
  setvbuf(stdout, (char *)NULL, _IONBF, 0);
  
  while(1) {
    fd_set fds;
    int n;
    struct timeval tv;
    
    clock_time_t next_event;
	
    n = process_run();
    next_event = etimer_next_expiration_time()-clock_time();

#if DEBUG_SLEEP
    if(n > 0) {
      printf("%d events pending\n",n);
    } else {
      printf("next event: T-%.03f\n",(double)next_event/(double)CLOCK_SECOND);
    }
#endif

	if(next_event>CLOCK_SECOND*2)
		next_event = CLOCK_SECOND*2;
    tv.tv_sec = n?0:next_event/CLOCK_SECOND;
    tv.tv_usec = n?0:next_event%1000*1000;

    FD_ZERO(&fds);
    FD_SET(STDIN_FILENO, &fds);
    select(1, &fds, NULL, NULL, &tv);

    if(FD_ISSET(STDIN_FILENO, &fds)) {
      char c;
      if(read(STDIN_FILENO, &c, 1) > 0) {
	serial_line_input_byte(c);
      }
    }
    
    etimer_request_poll();
  }
  
  return 0;
}

开发者ID:dak664，项目名称:contiki-2.x，代码行数:59，代码来源:contiki-main.c

示例5: main

/*---------------------------------------------------------------------------*/
int main(void)
{

  /*
   * Initialise hardware.
   */
  //halInit();
    clock_init();

  //uart1_init(115200);

    // Led initialisation
    leds_init();
    leds_on(LEDS_RED);

    /* configure ethernet (GPIOs, clocks, MAC, DMA) */
    ETH_BSP_Config();



  //INTERRUPTS_ON();

    /*
     * Initialize Contiki and our processes.
     */

    process_init();
/*
#if WITH_SERIAL_LINE_INPUT
  uart1_set_input(serial_line_input_byte);
  serial_line_init();
#endif*/
  /* rtimer and ctimer should be initialized before radio duty cycling layers*/
    rtimer_init();
  /* etimer_process should be initialized before ctimer */
    process_start(&etimer_process, NULL);
    ctimer_init();

    netstack_init();

    procinit_init();

    autostart_start(autostart_processes);

    while (1)
    {
        int r;

        do
        {
            leds_toggle(LEDS_YELLOW);
            r = process_run();
        } while (r > 0);
    }
}

开发者ID:jensnielsen，项目名称:contiki，代码行数:56，代码来源:contiki-main.c

示例6: main

int
main(void)
{

  leds_init();

  leds_on(LEDS_RED);

  /* Initialize USART */
  init_usart();
  
  /* Clock */
  clock_init();

  leds_on(LEDS_GREEN);

  ds2401_init();

  random_init(0);

  rtimer_init();

  /* Process subsystem */
  process_init();

  process_start(&etimer_process, NULL);

  ctimer_init();

  leds_on(LEDS_YELLOW);

  init_net();

  node_id_restore();
  
  printf_P(PSTR(CONTIKI_VERSION_STRING " started. Node id %u, using %s.\n"),
                                                       node_id, rime_mac->name);
  printf_P(PSTR("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n"),
	 ds2401_id[0], ds2401_id[1], ds2401_id[2], ds2401_id[3],
	 ds2401_id[4], ds2401_id[5], ds2401_id[6], ds2401_id[7]);

  leds_off(LEDS_ALL);

  /* Autostart processes */
  autostart_start(autostart_processes);

  /* Main scheduler loop */
  do {

    process_run();

  }while(1);

  return 0;
}

开发者ID:arbraham，项目名称:hummingbird，代码行数:55，代码来源:contiki-micaz-main.c

示例7: main

/*---------------------------------------------------------------------------*/
int
main(void)
{

  leds_init();

  leds_on(LEDS_RED);

  /* Initialize USART */
  init_usart();
  
  /* Clock */
  clock_init();

  leds_on(LEDS_GREEN);

  ds2401_init();
  
  node_id_restore();

  random_init(ds2401_id[0] + node_id);

  rtimer_init();

  /* Process subsystem */
  process_init();

  process_start(&etimer_process, NULL);

  ctimer_init();

  leds_on(LEDS_YELLOW);
  
  init_net();
  
  printf_P(PSTR(CONTIKI_VERSION_STRING " started. Node id %u\n"), node_id);

  leds_off(LEDS_ALL);

  /* Autostart processes */
  autostart_start(autostart_processes);

  mmem_init();
  /* Main scheduler loop */
  do {

    process_run();

  }while(1);

  return 0;
}

开发者ID:21moons，项目名称:contiki，代码行数:53，代码来源:contiki-iris-main.c

示例8: main

/*---------------------------------------------------------------------------*/
int
main(void)
{
  printf("Starting Contiki\n");
  process_init();
  ctimer_init();

  netstack_init();
  
  procinit_init();

  serial_line_init();
  
  //autostart_start(autostart_processes);

  
  /* Make standard output unbuffered. */
  setvbuf(stdout, (char *)NULL, _IONBF, 0);
  
  while(1) {
    fd_set fds;
    int n;
    struct timeval tv;
    
    n = process_run();

    
    tv.tv_sec = 0;
    tv.tv_usec = 1;

    FD_ZERO(&fds);
    FD_SET(STDIN_FILENO, &fds);
    select(1, &fds, NULL, NULL, &tv);

    if(FD_ISSET(STDIN_FILENO, &fds)) {
      char c;
      if(read(STDIN_FILENO, &c, 1) > 0) {
	serial_line_input_byte(c);
      }
    }
    
    etimer_request_poll();
  }
  
  return 0;
}

开发者ID:michaelkirsche，项目名称:6lowpan4omnet-diy，代码行数:47，代码来源:contiki-main.c

示例9: freakz_init

void freakz_init()
{
    drvr_init();
    mmem_init();
    ctimer_init();
    mac_init();
    nwk_init();
    aps_init();
    af_init();
    zdo_init();
    buf_init();
    slow_clock_init();

#if (TEST_SIM == 1)
    test_app_init();
#endif
}

开发者ID:abhinavgupta，项目名称:IEEE-802.15.4，代码行数:17，代码来源:freakz.c

示例10: app_main

/*---------------------------------------------------------------------------*/
void
app_main(void)
{
  printf("Starting Contiki\n");

  process_init();
  procinit_init();
  ctimer_init();
  eth_init();

  autostart_start(autostart_processes);

  while(1) {
    process_run();
  }

  halt();
}

开发者ID:1847123212，项目名称:contiki，代码行数:19，代码来源:contiki-main.c

示例11: main_minimal_net

int main_minimal_net(void) {

	// TODO: Pegar MAC Address do Microchip MRF24J40MA
	clock_init();

	linkaddr_set_node_addr((linkaddr_t*) &addr);
	memcpy(&uip_lladdr.addr, &linkaddr_node_addr.u8, sizeof(uip_lladdr.addr));

#if 1	
	queuebuf_init();
	netstack_init();
#endif  	

	process_init();
	/* procinit_init initializes RPL which sets a ctimer for the first DIS */
	/* We must start etimers and ctimers,before calling it */
	process_start(&etimer_process, NULL);
	ctimer_init();

	procinit_init();

#if AUTOSTART_ENABLE
	autostart_start(autostart_processes);
#endif
	OSSemBinaryCreate(0, &Contiki_Sem);

	PRINTF("\n*******%s online*******\n\r", CONTIKI_VERSION_STRING);

	while (1) {

		int n;
		//char c;
		//INT8U ret,poll;
		//clock_time_t next_event;

		do {
			n = process_run();
			//mrf24j40_get_rssi();
		} while (n > 0);

		OSSemPend(Contiki_Sem, 0);
	}
}

开发者ID:thiagohd，项目名称:BRTOSicslowpan，代码行数:43，代码来源:contiki-main.c

示例12: network_initialization

static int network_initialization(void)
{
	/* Initialize and start Contiki uIP stack */
	clock_init();

	rtimer_init();
	ctimer_init();

	process_init();
	tcpip_set_outputfunc(net_tcpip_output);

	process_start(&tcpip_process, NULL);
	process_start(&simple_udp_process, NULL);
	process_start(&etimer_process, NULL);

	slip_start();

	return 0;
}

开发者ID:pafcndg，项目名称:ndgIqSoftwareKit，代码行数:19，代码来源:net_init.c

示例13: another_net

int another_net(void) {

	clock_init();



	random_init(MOTE_ID);
	init_net(MOTE_ID);


	process_init();

	start_radio_task();

	process_start(&etimer_process, NULL);

	ctimer_init();
	rtimer_init();

	procinit_init();

	autostart_start(autostart_processes);
	start_udp_server_task();

	PRINTF("Processes running\n");

	OSSemBinaryCreate(0, &Contiki_Sem);

	PRINTF("\n*******%s online*******\n\r", CONTIKI_VERSION_STRING);

	while (1) {

		int n;

		do {
			n = process_run();
		} while (n > 0);

		OSSemPend(Contiki_Sem, 0);
	}
}

开发者ID:thiagohd，项目名称:BRTOSicslowpan，代码行数:41，代码来源:contiki-main.c

示例14: SimluateRun

void SimluateRun(CuTest* tc)
{
 /*
  * Initialize Contiki and our processes.
  */
  process_init();
  process_start(&etimer_process, NULL);
  ctimer_init();

  energest_init();
  ENERGEST_ON(ENERGEST_TYPE_CPU);

  window_init(0xff);  

  autostart_start(autostart_processes);

  process_start(&event_process, NULL);
  while(run) {
    int r;
    do {
      /* Reset watchdog. */
      r = process_run();
    } while(r > 0);

#if 0
    int n = etimer_next_expiration_time();
    if (n > 0)
    {
      int p = n - clock_time();
      if (p > 0)
      nanosleep(p);
    }
    else
    {
      nanosleep(1000);
    }
#endif
    etimer_request_poll();
  }
}

开发者ID:Sowhat2112，项目名称:KreyosFirmware，代码行数:40，代码来源:windowTest.c

示例15: pal_startTimers

void pal_startTimers(void) {
	// Initialize the hardware to drive the
	// signal processing layers.
	ctimer_set_callback(pal_captureTimerFn);

	comparator_enablePin(LEFT_PORT, LEFT_PIN);
	comparator_enablePin(VREF_PORT, VREF_PIN);

	comparator_init();
	comparator_setup(
		comparator_getChannel(LEFT_PORT, LEFT_PIN),
		comparator_getChannel(VREF_PORT, VREF_PIN)
	);
	comparator_on();

	ctimer_init();
	ptimer_init();

	ptimer_start(TIMER_TICKS, pal_periodicTimerFn);
	// Wait 100ms for everything to stabalize.
	//util_delayMs(100);
}

开发者ID:Shatiff，项目名称:IRtemperature，代码行数:22，代码来源:pal.c

示例16: init_net

/*---------------------------------------------------------------------------*/
void
init_net(void)
{
  int i;
  uip_ipaddr_t hostaddr, netmask;
  rimeaddr_t rimeaddr;

  /* Init Rime */
  ctimer_init();
  rimeaddr.u8[0] = node_id & 0xff;
  rimeaddr.u8[1] = node_id >> 8;
  rimeaddr_set_node_addr(&rimeaddr);
  printf("Rime started with address: ");
  for(i = 0; i < sizeof(rimeaddr_node_addr.u8) - 1; i++) {
    printf("%d.", rimeaddr_node_addr.u8[i]);
  }
  printf("%d\n", rimeaddr_node_addr.u8[i]);

  /* Init uIPv4 */
  process_start(&tcpip_process, NULL);
  process_start(&uip_fw_process, NULL);
  process_start(&slip_process, NULL);
  uip_init();
  uip_fw_init();
  uip_ipaddr(&hostaddr, 172, 16, rimeaddr_node_addr.u8[1], rimeaddr_node_addr.u8[0]);
  uip_ipaddr(&netmask, 255,255,0,0);
  uip_sethostaddr(&hostaddr);
  uip_setnetmask(&netmask);
  uip_fw_register(&wsn_if);
  uip_fw_default(&slip_if);
  rs232_set_input(slip_input_byte);
  printf("uIP started with IP address: %d.%d.%d.%d\n", uip_ipaddr_to_quad(&hostaddr));

  /* uIPv4 <-> COOJA's packet radio */
  /*tcpip_set_outputfunc(sender);*/
  cooja_radio.set_receive_function(receiver);
}

开发者ID:EDAyele，项目名称:ptunes，代码行数:38，代码来源:init-net-uip.c

示例17: initialize

/*-----------------------------Low level initialization--------------------*/
static void initialize(void) {
  watchdog_init();
  watchdog_start();

#if CONFIG_STACK_MONITOR
  /* Simple stack pointer highwater monitor. The 'm' command in cdc_task.c
   * looks for the first overwritten magic number.
   */
{
extern uint16_t __bss_end;
uint16_t p=(uint16_t)&__bss_end;
    do {
      *(uint16_t *)p = 0x4242;
      p+=100;
    } while (p<RAMEND-100);
}
#endif

  /* Initialize hardware */
  // Checks for "finger", jumps to DFU if present.
  init_lowlevel();
  
  /* Clock */
  clock_init();

#if USB_CONF_RS232
  /* Use rs232 port for serial out (tx, rx, gnd are the three pads behind jackdaw leds */
  rs232_init(RS232_PORT_0, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
  /* Redirect stdout to second port */
  rs232_redirect_stdout(RS232_PORT_0);
#if ANNOUNCE
  printf_P(PSTR("\n\n\n********BOOTING CONTIKI*********\n"));
#endif
#endif
	
	Leds_init();
	
  /* rtimer init needed for low power protocols */
  rtimer_init();

  /* Process subsystem. */
  process_init();

  /* etimer process must be started before ctimer init */
  process_start(&etimer_process, NULL);
  
#if RF230BB
  ctimer_init();
  /* Start radio and radio receive process */
  /* Note this starts RF230 process, so must be done after process_init */
  NETSTACK_RADIO.init();

  /* Set addresses BEFORE starting tcpip process */

  memset(&tmp_addr, 0, sizeof(rimeaddr_t));
  if(!get_eui64_from_eeprom(tmp_addr.u8)) {
#if JACKDAW_CONF_RANDOM_MAC
    // It doesn't look like we have a valid EUI-64 address
	// so let's try to make a new one from scratch.
    Leds_off();
    Led2_on();
    generate_new_eui64(tmp_addr.u8);
	if(!set_eui64_to_eeprom(tmp_addr.u8)) {
		watchdog_periodic();
		int i;
		for(i=0;i<20;i++) {
			Led1_toggle();
			_delay_ms(100);
		}
		Led1_off();
	}
	Led2_off();
#else
	tmp_addr.u8[0]=0x02;
	tmp_addr.u8[1]=0x12;
	tmp_addr.u8[2]=0x13;
	tmp_addr.u8[3]=0xff;
	tmp_addr.u8[4]=0xfe;
	tmp_addr.u8[5]=0x14;
	tmp_addr.u8[6]=0x15;
	tmp_addr.u8[7]=0x16;
#endif /* JACKDAW_CONF_RANDOM_MAC */
  }
  

  //Fix MAC address
  init_net();

#if UIP_CONF_IPV6
  memcpy(&uip_lladdr.addr, &tmp_addr.u8, 8);
#endif

  rf230_set_pan_addr(
	get_panid_from_eeprom(),
	get_panaddr_from_eeprom(),
	(uint8_t *)&tmp_addr.u8
  );
  
#if JACKDAW_CONF_USE_SETTINGS
//.........这里部分代码省略.........

开发者ID:Asterios，项目名称:contiki-tls-dtls，代码行数:101，代码来源:contiki-raven-main.c

示例18: main

int
main(int argc, char *argv[])
{
  node_id_restore();
  /* init system: clocks, board etc */
  system_init();
  sio2host_init();

  leds_init();
  leds_on(LEDS_ALL);

  system_interrupt_enable_global();
  flash_init();
  delay_init();

  /* Initialize Contiki and our processes. */
  
  #ifdef LOW_POWER_MODE
  configure_tc3();
  #else
  clock_init();
  #endif

  process_init();
  ctimer_init();
  rtimer_init();
  process_start(&etimer_process, NULL);
  
  /* Set MAC address and node ID */
#ifdef NODEID
  node_id = NODEID;
#ifdef BURN_NODEID
  node_id_burn(node_id);
#endif /* BURN_NODEID */
#else/* NODE_ID */
#endif /* NODE_ID */

  printf("\r\n\n\n\n Starting the SmartConnect-6LoWPAN \r\n Platform : Atmel IoT device \r\n");
  print_reset_causes();
  netstack_init();
 #if BOARD == SAMR21_XPLAINED_PRO
  eui64 = edbg_eui_read_eui64();
  SetIEEEAddr(eui64);
#else
  SetIEEEAddr(node_mac);  
#endif 
  set_link_addr();  
  rf_set_channel(RF_CHANNEL);
  printf("\r\n Configured RF channel: %d\r\n", rf_get_channel());
  leds_off(LEDS_ALL);
  process_start(&sensors_process, NULL);
  energest_init();

  ENERGEST_ON(ENERGEST_TYPE_CPU);
  if(node_id > 0) {
    printf(" Node id %u.\r\n", node_id);
  } else {
    printf(" Node id not set.\r\n");
  }

  /* Setup nullmac-like MAC for 802.15.4 */
#if SAMD
  memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
#else 
  memcpy(&uip_lladdr.addr, eui64, sizeof(uip_lladdr.addr));
#endif
   
  queuebuf_init();
  printf(" %s %lu %d\r\n",
         NETSTACK_RDC.name,
         (uint32_t) (CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
                         NETSTACK_RDC.channel_check_interval())),
         RF_CHANNEL);

  process_start(&tcpip_process, NULL);
  printf(" IPv6 Address: ");
  {
    uip_ds6_addr_t *lladdr;
    int i;
    lladdr = uip_ds6_get_link_local(-1);
    for(i = 0; i < 7; ++i) {
      printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
             lladdr->ipaddr.u8[i * 2 + 1]);
    }
    printf("%02x%02x\r\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
  }

  {
    uip_ipaddr_t ipaddr;
    int i;
    uip_ip6addr(&ipaddr, 0xfc00, 0, 0, 0, 0, 0, 0, 0);
    uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
    uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
    printf("Tentative global IPv6 address ");
    for(i = 0; i < 7; ++i) {
      printf("%02x%02x:",
             ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
    }
    printf("%02x%02x\r\n",
           ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
//.........这里部分代码省略.........

开发者ID:songjw0820，项目名称:contiki_atmel，代码行数:101，代码来源:ota-main.c

示例19: init_lowlevel

void
init_lowlevel(void)
{

  /* Second rs232 port for debugging */
  rs232_init(RS232_PORT_1, USART_BAUD_115200,
             USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);

  /* Redirect stdout to second port */
  rs232_redirect_stdout(RS232_PORT_1);
  
  /* Clock */
  clock_init();
 
 /* rtimers needed for radio cycling */
  rtimer_init();

 /* Initialize process subsystem */
  process_init();
 /* etimers must be started before ctimer_init */
  process_start(&etimer_process, NULL);
  
#if RF230BB

  ctimer_init();
  /* Start radio and radio receive process */
  NETSTACK_RADIO.init();

  /* Set addresses BEFORE starting tcpip process */

  linkaddr_t addr;
  memset(&addr, 0, sizeof(linkaddr_t));
  eeprom_read_block ((void *)&addr.u8,  &mac_address, 8);
 
#if UIP_CONF_IPV6
  memcpy(&uip_lladdr.addr, &addr.u8, 8);
#endif  
  rf230_set_pan_addr(IEEE802154_PANID, 0, (uint8_t *)&addr.u8);
#ifdef CHANNEL_802_15_4
  rf230_set_channel(CHANNEL_802_15_4);
#else
  rf230_set_channel(26);
#endif

  linkaddr_set_node_addr(&addr); 

  PRINTF("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);

  /* Initialize stack protocols */
  queuebuf_init();
  NETSTACK_RDC.init();
  NETSTACK_MAC.init();
  NETSTACK_NETWORK.init();

#if ANNOUNCE_BOOT
  printf_P(PSTR("%s %s, channel %u"),NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel());
  if (NETSTACK_RDC.channel_check_interval) {//function pointer is zero for sicslowmac
    unsigned short tmp;
    tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
                                   NETSTACK_RDC.channel_check_interval());
    if (tmp<65535) printf_P(PSTR(", check rate %u Hz"),tmp);
  }
  printf_P(PSTR("\n"));
#endif

#if UIP_CONF_ROUTER
#if ANNOUNCE_BOOT
  printf_P(PSTR("Routing Enabled\n"));
#endif
  rime_init(rime_udp_init(NULL));
  uip_router_register(&rimeroute);
#endif

  process_start(&tcpip_process, NULL);

#else
/* mac process must be started before tcpip process! */
  process_start(&mac_process, NULL);
  process_start(&tcpip_process, NULL);
#endif /*RF230BB*/

}

开发者ID:200018171，项目名称:contiki，代码行数:82，代码来源:contiki-avr-zigbit-main.c

示例20: main

int main(int argc, char **argv)
{
	int32_t r;

	process_init(); // run before any function that starts a process
	pic32_init();
	watchdog_init();
	leds_init();
	leds_progress_init();
	buzzer_init();

	clock_init();
	rtimer_init();
	ctimer_init();

	leds_on(LEDS_ALL);

        /* Serial line init part 2/3: set up the UART port. */
	uart_console_init(UART_BAUDRATE);

//	usb_serial_init();
//	usb_serial_set_input(serial_line_input_byte);

        /* Serial line init part 3/3: start the OS process. */
	serial_line_init();

	asm volatile("ei");  // enable interrupts

	PRINTF("CPU Clock: %uMhz\n",
	       pic32_clock_get_system_clock() / 1000000);
	PRINTF("Peripheral Clock: %uMhz\n",
	       pic32_clock_get_peripheral_clock() / 1000000);

	random_init(4321);
	process_start(&etimer_process, NULL);
	process_start(&sensors_process, NULL);
	SENSORS_ACTIVATE(button_sensor);

	/* Starting autostarting process */
	print_processes(autostart_processes);
	autostart_start(autostart_processes);

	leds_off(LEDS_ALL);
	watchdog_start();
	PRINTF("Starting the main scheduler loop\n");

	/*
	 * This is the scheduler loop.
	 */
	while (1) {

		do {
			/* Reset watchdog. */
			watchdog_periodic();
			r = process_run();
		} while (r > 0);

#if LPM_MODE > LPM_MODE_NONE
		watchdog_stop();
		/* low-power mode start */
		asm volatile("wait");
		/* low-power mode end */
		watchdog_start();
#endif // LPM_MODE
	}

	return 0;
}

开发者ID:MoixaEnergy，项目名称:contiki，代码行数:68，代码来源:contiki-maslow-main.c

注：本文中的ctimer_init函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。